- observium - lists.observium.org

Blank Dashboards
by Andrew Lemin 07 Jan '19

07 Jan '19

Hi. Has anyone else experienced the same issue where after the Observium upgrade (9657) the new dashboard is showing empty transit and peering traffic graphs? Before the upgrade they were showing the traffic data fine, but on the new dashboard based front page, the graphs are empty? I’ve cleared browser cache etc and waited for a while. I have also tried adding a new graph, which involves browsing to the aggregate transit graph and click add to widget etc. But that only creates a mini graph (which does show). The nice front page graphs for Transit, Peering, and Transit and Peering are just white :( [image1.jpeg] The Gap the graph below was from the upgrade maintenance as I also upgraded the distribution with apt upgrade etc. Everything else seems ok Thanks, Andy. Sent from a teeny tiny keyboard, so please excuse typos

7 11

Default Micrograph size?
by Shawn L 07 Jan '19

07 Jan '19

Pre-upgrade (to 19.1.9661) we were able to set a default micrograph size in config.php ie: $config['frontpage']['micrograph_settings']['width'] = 250; $config['frontpage']['micrograph_settings']['height'] = 100; Post upgrade, that value doesn't seem to be used anymore. Is there a way to set the default size of the micro graphs in the config? I know I can use the GUI to edit each individual graph, but I'd like to be able to just do it once and have them all the same size. Unless I'm missing something....

2 1

Map no longer centered or zoomed
by Shawn L 07 Jan '19

07 Jan '19

After taking update 19.1.9657 this weekend, the map on the dashboard still appears, but it's zoomed out to show all of South America and Africa, instead if it's previous value of being sized / zoom-ed to show just our equipment. Is there a way to change / fix this? Shawn

3 3

Version bar is hiding bottom of front page
by Thibault Richard 07 Jan '19

07 Jan '19

Hello, I've just updated to the latest stable version. Thanks ! I've just noticed a weird thing. As you can see on this screenshot, the bar displaying the version number is hiding the bottom of the front page (at the right of the screenshot, aside 70,4 Mbps, you can see the top of a graphic hidden by the version bar) I've tested with different browser Not a big deal but at you least you are now aware Best Regards Thibault

2 2

Discovery updates sensors on every run
by Niklas Larsson 07 Jan '19

07 Jan '19

Hi, replaced a Dell EqualLogic member and since then I get logs of sensor updates every time discovery is running. I can not see any changes though, snipped from attached output: > > Discover sensor: [class: temperature, device: eql.example.com, oid: > .1.3.6.1.4.1.12740.2.1.6.1.3.1.1071562282.2, index: 1.1071562282.2, > type: equallogic, descr: Backplane sensor 0, scale: 1, limits: (1, 2, > 45, 50), CURRENT: 24, , > > SQL[SELECT COUNT(`sensor_id`) FROM `sensors` > WHERE `poller_type`= 'snmp' AND `sensor_class` = > 'temperature' AND `device_id` = '38' AND `sensor_type` = 'equallogic' > AND `sensor_index` = '1.1071562282.2'] > ROWS[1] > SQL RUNTIME[0.00074983s] > > SQL[SELECT * FROM `sensors` WHERE `sensor_class` = 'temperature' AND > `device_id` = '38' AND `sensor_type` = 'equallogic' AND `sensor_index` > = '1.1071562282.2'] > ROWS[1] > SQL RUNTIME[0.00094700s] > Compare float numbers: "50" with "50", epsilon: "0.1", comparision: "0 > < 0.1", numbers: SAME > Compare float numbers: "45" with "45", epsilon: "0.1", comparision: "0 > < 0.1", numbers: SAME > Compare float numbers: "1" with "1", epsilon: "0.1", comparision: "0 < > 0.1", numbers: SAME > Compare float numbers: "2" with "2", epsilon: "0.1", comparision: "0 < > 0.1", numbers: SAME > Compare float numbers: "1" with "1", epsilon: "1.0E-5", comparision: > "0 < 1.0E-5", numbers: SAME > Compare float numbers: "0" with "0", epsilon: "1.0E-5", comparision: > "0 < 1.0E-5", numbers: SAME > > SQL[SELECT `attrib_value` FROM `entity_attribs` WHERE `entity_type` = > 'sensor' AND `entity_id` = '5230' AND `attrib_type` = 'sensor_addition'] > ROWS[0] > SQL RUNTIME[0.00034690s] > > SQL[UPDATE `sensors` set `sensor_mib` ='',`sensor_object` ='' WHERE > `sensor_id` = '5230'] > ROWS[0] > SQL RUNTIME[0.00050497s] > U > SQL[INSERT INTO `eventlog` > (`device_id`,`entity_id`,`entity_type`,`timestamp`,`severity`,`message`) > VALUES ('38','5230','sensor',NOW(),'6','Sensor updated: temperature > equallogic 1.1071562282.2 Backplane sensor 0')] > ROWS[1] > SQL RUNTIME[0.00040412s] What can I do? /niklas

3 5

Coriant G30 Monitoring
by Jay Hanke 06 Jan '19

06 Jan '19

Is anyone monitoring Coriant G30 devices in Observium?

2 3

19.1.9654 Front page map
by Luca Sasdelli 04 Jan '19

04 Jan '19

Hi all, does it exist any way to set a map area to be shown? Here I see a twice planisphere, while our targeted devices just cover the Europe only. Thanks and greets. Luca

1 0

BFD Support
by Klimek, Denis 03 Jan '19

03 Jan '19

Hi all, do you have anything on your roadmap regarding BFD support? CISCO-IETF-BFD-MIB, JUNIPER-BFD-MIB, BFD-STD-MIB etc pp Mit freundlichem Gruß Stadtwerke Norderstedt Denis Klimek Professional Network Engineer IP-Systemtechnik Tel: 040 / 521 04 - 1049 Mobil: 0151 / 652 219 06 dklimek(a)stadtwerke-norderstedt.de<mailto:dklimek@stadtwerke-norderstedt.de> www.stadtwerke-norderstedt.de<http://www.stadtwerke-norderstedt.de/>

1 0

Help
by thesa1nt＠mail.bg 03 Jan '19

03 Jan '19

Hi, I have Observium CE in my system and so far worked well. Now I added a two printers - Brother MFC-L8690CDW and Brother MFC-L9570CDW. But in "Printer Supplies" observium showed "Unknown" for Toner Cartbridge. After update to the newest version now show "Some Space" ( 1% ) and it isn't correct. Can you help me, please ? ------------------------------------- П.П. Искаш бизнесът ти да е и онлайн? Лесно е! Направи си сайт. В СуперХостинг.БГ пазят място за него! Виж повече на www.superhosting.bg. https://www.superhosting.bg/?utm_source=mail.bg&utm_medium=cpm&utm_content=…

2 1

Best procedure to delete device without losing graphs
by Klimek, Denis 03 Jan '19

03 Jan '19

Hi, is there any best procedure known to keep graphs data for a "Aggregated Graph" build with filters? (Port groups) Example: We have a Port Group called "Transit" which includes all ports labeled as Transit upstreams. Now we replaced the whole router which had a transit upstream. The new router does have it aswell. Now we want to keep the existing data for the Port Group Graph for historical reason, but we also want to delete the device in the database to keep Observium database clean. Currently we also have duplicate IP addresses for the configured IP addresses... on the old device and on the new one. I think if we delete the device we will lose the port label information which is important to build the port groups with the filters. Can someone advise something? Mit freundlichem Gruß Stadtwerke Norderstedt Denis Klimek Professional Network Engineer IP-Systemtechnik Tel: 040 / 521 04 - 1049 Mobil: 0151 / 652 219 06 dklimek(a)stadtwerke-norderstedt.de<mailto:dklimek@stadtwerke-norderstedt.de> www.stadtwerke-norderstedt.de<http://www.stadtwerke-norderstedt.de/>

3 3