- observium - lists.observium.org

graphs kind of showing
by Dean Kamali 26 Mar '13

26 Mar '13

Wondering if some one could help, the graphs are getting created, but its kind of showing in the UI, please find the attached image for example. Environment (ubuntu 12.4) PHP 5.3.10-1 rrdtool 1.4.7-1 My cron is setup correctly, and its running without any issues. Any ideas what could be wrong? Thanks

2 2

Juniper SSG CPU
by Adam Summerfield 26 Mar '13

26 Mar '13

We constantly see the CPU being removed and added.... 2013-03-26 00:47:51 srdcz2-fw-01 System Processor added: type juniperive index 1 descr CPU Utilization 2013-03-26 00:47:51 srdcz2-fw-01 System Processor added: type screenos index 1 descr Processor 2013-03-26 00:47:49 srdcz1-fw-01 System Processor added: type juniperive index 1 descr CPU Utilization 2013-03-26 00:47:49 srdcz1-fw-01 System Processor added: type screenos index 1 descr Processor 2013-03-26 06:47:56 srdcz2-fw-01 System Processor removed: type juniperive index 1 descr CPU Utilization 2013-03-26 06:47:56 srdcz2-fw-01 System Processor removed: type screenos index 1 descr Processor 2013-03-26 06:47:54 srdcz1-fw-01 System Processor removed: type juniperive index 1 descr CPU Utilization 2013-03-26 06:47:54 srdcz1-fw-01 System Processor removed: type screenos index 1 descr Processor I have tried modifying SNMP timeouts and retries and have had no success... [timeout] => 10 [retries] => 5 Regards, Adam

1 1

browsable archives and (sub)domains in hostnames
by Andreas Rüdel 25 Mar '13

25 Mar '13

Hi, Observium 1) I wonder: is there a searchable version of the mailing list archives somewhere? 2) I need some hint where I can change the behaviour of observium to cut avay domains after the first dot - we used subdomains to segment our hardware so now all devices are called the same on the overview screen. (alarms / events) Example: switch1.site1.country1 switch1.site2.country1 switch1.site1.country2 and so on.. (I know it's boring but we ran out of elven names at one point...) ;) on the overview page they would all be called "switch1" when I go to "devices" everything is just fine can this be changed somewhere? could not find in config.php and don't dare editing the other files thanks! Andreas

9 12

[patch] Add Support for Gnodal devices
by james.adams＠stfc.ac.uk 22 Mar '13

22 Mar '13

Hi Adam et al, The attached tarball contains initial support for Gnodal switches, enjoy! Cheers, James -- Scanned by iCritical.

1 0

Observium Virtual Machines wrong OS Version
by observium＠velder.li 22 Mar '13

22 Mar '13

Hi there In the virtual machine overview (ESXi Host..), the os version is not correct. I added the VM to observium, when squeeze 6.0.6 was installed. Now it is 6.0.7 (since a few weeks) but observium still says 6.0.6. Is that a bug? Regards, Patrick

1 0

DELL metered PDU - supported? in planning?
by Mihai - Cristian Satmarean 21 Mar '13

21 Mar '13

Hi, I always like to write to this list because I get answers. Thank you! I would like to ask if Dell Metered PDU's are supported or planned to be supported: PDU Identification Attribute Value Model DELL Part Number 09FG8 Serial Number CN-009FG8-75166-31F-0005-A02 Firmware Version 01.02.0011 Web/SNMP Card Identification Attribute Value Firmware Version DELL DPI 01.04.0041 Serial Number 111210312380017 MAC Address B8-AC-6F-FC-F9-C9 NMC Up-Time 44 days 19 hours 11 mins 16.49 secs. Best!

3 2

Observium Network Discovery
by Rizwan azher 21 Mar '13

21 Mar '13

Hi All, - How actually network discovery works for observium ? I mean do I have to just enable SNMP with same community and same Snmp version on all my devices so that observium can discover my whole networkor I jus have to add of single device name in config.apt and whole network will be autoatically discovered?..... and does observium also show me the whole map for my network ( connectivity b/w my devices)? and most important do i need to make any device as Seed device for my network ? from which it will automatically penetrate to whole network...Further more after discovering of my device can i filter those graphs so that I can only plot useful or main graphs - Can I also make groups to those graphs I mean is it possible that I can make a separate tab for my roters and the \n separate tab for switches etc. Thanks Rizwan

2 1

VMware ESXi hosts missing information
by Matt Hucker 21 Mar '13

21 Mar '13

Hi all, I'm using Observium r3791 to monitor a few VMware ESXi 5.1 hosts along with a mix of servers and network gear. All seems to be running well, except for the ESX hosts. When Observium polls the ESX hosts it seems to be missing a lot of information due to missing MIBs: My /etc/snmp/snmpd.conf has the mibdirs line as per the installation instructions. mibdirs /opt/observium/mibs It seems if I copy all of the mibs from the /opt/observium/mibs directory to /usr/share/mibs, then the poller seems to run OK. No more missing module errors. Is this expected behaviour? Partial debug poller output below: Observium Poller v0.13.3.3784 DEBUG! Starting polling run: SQL[SELECT `device_id` FROM `devices` WHERE `disabled` = 0 AND `hostname` LIKE 'esx01%' ORDER BY `device_id` ASC] SQL[SELECT * FROM `devices` WHERE `device_id` = '11'] SQL[SELECT * FROM devices_attribs WHERE `device_id` = '11'] esx01.prod.nrhosted.com 11 vmware DEBUG: SNMP Auth options = -v2c -c esx01 /usr/bin/snmpget -v2c -c esx01 -Oqv -m SNMPv2-MIB -M /opt/observium/mibs udp:esx01.prod.nrhosted.com:161 sysObjectID.0 SNMPv2-SMI::enterprises.6876.4.1 RRD[update /opt/observium/rrd/esx01.prod.nrhosted.com/status.rrd N:1] OK u:0.01 s:0.00 r:0.07 RRD[update /opt/observium/rrd/esx01.prod.nrhosted.com/ping.rrd N:1.08] OK u:0.02 s:0.00 r:0.07 RRD[update /opt/observium/rrd/esx01.prod.nrhosted.com/ping_snmp.rrd N:46.31] DEBUG: SNMP Auth options = -v2c -c esx01 /usr/bin/snmpget -v2c -c esx01 -OQUs -m +VMWARE-ROOT-MIB:VMWARE-SYSTEM-MIB -M +/opt/observium/mibs/vmware udp:esx01.prod.nrhosted.com:161 VMWARE-SYSTEM-MIB::vmwProdName.0 VMWARE-SYSTEM-MIB::vmwProdVersion.0 VMWARE-SYSTEM-MIB::vmwProdBuild.0 MIB search path: /root/.snmp/mibs:/usr/share/mibs/site:/usr/share/snmp/mibs:/usr/share/mibs/iana:/usr/share/mibs/ietf:/usr/share/mibs/netsnmp:/opt/observium/mibs/vmware The first call to snmpget has the correct MIB path (/opt/observium/mibs), but the 2nd call to snmpget seems to only include the /opt/observium/mibs/vmware (leaving out /opt/observium/mibs) Consequently I get a lot of errors such as these: Cannot find module (SNMPv2-TC): At line 10 in /usr/share/mibs/netsnmp/UCD-DLMOD-MIB Cannot find module (SNMPv2-SMI): At line 34 in /usr/share/mibs/netsnmp/UCD-SNMP-MIB Cannot find module (SNMPv2-TC): At line 37 in /usr/share/mibs/netsnmp/UCD-SNMP-MIB Did not find 'enterprises' in module #-1 (/usr/share/mibs/netsnmp/UCD-SNMP-MIB) Did not find 'DisplayString' in module #-1 (/usr/share/mibs/netsnmp/UCD-SNMP-MIB) Did not find 'TruthValue' in module #-1 (/usr/share/mibs/netsnmp/UCD-SNMP-MIB) -- Cheers, Matt.

3 3

Observium r3779
by Laurens Vets 20 Mar '13

20 Mar '13

Hello, Quick question about the new interface. All 'toolbars' now seem to have an arrow. When I hover over them, should that normally open a list?

1 1

zfs file system size wrong listed
by Mihai - Cristian Satmarean 20 Mar '13

20 Mar '13

Hi all, I have a zfs filesystem on OpenIndiana that is 25 TB and occupancy is around 90%. Observium correctly recognizes most of the OpenIndiana features, but the size of this filesystem is reported around 1.5 Tb. Is there something I can do to fix it? Thank you!

4 13