- observium - lists.observium.org

Missing graph data
by Jason Vanlandingham 15 Jun '15

15 Jun '15

I had a problem with the machine Observium is running on. The CPU fan/heatsink fell off. After I got the machine up again on the evening of 11 June, the CPU Temp graph showed normal temps in the 30-45 range for months, then a big spike up to 115. (eek!) But at least the server came back to life, and I still had all my data. Everything still seems to be running OK, but all of a sudden there is now no data at all in the CPU temp graph before ~1:00AM 12 June. From this machine I get temp readings for CPU temp, Motherboard temp, and 4 other "temp#" listings. "Temp1" and "Temp3" still seem to have the data they should, but the others are missing. One thing I did change after the recovery: I noticed the time zone on the server was set to US Eastern, and I changed it to US Central. I would think if that was the cause of my problem it would hit a lot more of the data.

3 3

Roadmap for further alerting features?
by Jason Lixfeld 14 Jun '15

14 Jun '15

Hi, Curious whether or not there is a roadmap to support alerting on syslog messages or SNMP traps? I have these really ugly syslog power supply alerts from Splunk that I’d love to get rid of :) Thanks!

2 1

Observium with Mikrotik SNMPv3
by Eduardo Schoedler 13 Jun '15

13 Jun '15

Hi, Is someone using observium with mikrotik snmpv3? Could you send me the config of both, please? Thanks! -- Eduardo Schoedler

2 2

Adding Custom Information
by Daniel Kasen 11 Jun '15

11 Jun '15

Is there a way to add custom strings to a device? Ie. I want to add the current version of some linux software that wasn't an RPM install to an object. I have created extended snmp info, but can't find any way to attach that to the polling agent. Ideally this would be a table layout and not a graph as it's simply a key:pair like apache: "2.4.10" *~ Daniel *

1 0

Alerts Triggering even when disabled
by Johnston, Tom 10 Jun '15

10 Jun '15

* Cisco 2960-X (24 Ports PoE) running c2960x-universalk9-mz.150-2a.EX5.bin * Observium 0.15.6.6446 * Alert Check * Check Conditions * ifAdminStatus eq up * ifOperStatus ne up * Associations * Device Match * os eq ios * Entity Match * ifType equals ethernetCsmacd I have Both Polling and Alerting Disabled on the interfaces which are not up on this switch, (they are not admin down just no link). So the issue is even though I have them set not to poll nor to alert, they still are doing so. What can I look at to see why that would be? I’ve tried deleting and re-adding the device but the same behavior applies. Thanks in advance for any advice. [cid:2E4D1B6E-4174-4130-BED4-825EC44D8342] [cid:3DFA6513-B87A-4CD8-8EAD-CD62E44447CB]

1 0

Re: [Observium] No Network Ports Discovered
by ron＠rjr-services.com 10 Jun '15

10 Jun '15

discover.php -d -h <hostname> As always, sanitize before you post/attach/pastebin the output to the list. Sent from my Verizon Wireless 4G LTE DROID Stephen Bateman <stephen(a)thebritishgeek.co.uk> wrote: -- This message has been scanned by E.F.A. Project and is believed to be clean.

1 0

No Network Ports Discovered
by Stephen Bateman 10 Jun '15

10 Jun '15

I have just added a 2 new devices to as normal a VMWare Host & Linux VM machine, however for some reason there are no Ports discovered when it got polled. Any pointers on how debug this issue ?

1 0

Deleting sensors and graphs from a device
by Jason Lixfeld 09 Jun '15

09 Jun '15

Hi all, I have added an extremely pared down copy of a device to Observium and am using it strictly to be able to monitor BGP sessions inside a VRF context. I have disabled all sensors, modules, graphs, etc from the device configuration, but it seems that any sensors and graphs that were created before these settings were disabled are still present on the device’s page. How can I turf all the graphs and sensors and all that stuff from these devices? Thanks!

1 0

Problem with Ruckus AP
by Eduardo Schoedler 09 Jun '15

09 Jun '15

Hi, Since the big update (I think is because the new community edition), our observium is having problems with an Ruckus AP: [image: Imagem inline 1] What can be causing this? Thanks. -- Eduardo Schoedler

2 2

Access denied for user 'root'@'localhost' (using password: NO)
by Einar Storeng 09 Jun '15

09 Jun '15

Hi. After trying to upgrade to Community Edition version 0.15.6 i cant update the database. root@observium /# /opt/observium/discovery.php -h all MySQL Error: Access denied for user 'root'@'localhost' (using password: NO) Have done this regularly, but it seems it lost its config on root permisions on the DB I have different passwords on my root and root for MySQL I have no problem logging in to the web admin for PHPMyAdmin with my Mysql password for root. Any clues? Is there a scipt for roolback? Best regards Einar

6 9