- observium - lists.observium.org

Ricoh private MIB
by Mike Stupalov 22 Aug '18

22 Aug '18

Someone can get RicohPrivateMIB from an restricted vendor area? RICOH places in open access only PDF file with mib description. > Mike Stupalov <mailto:mike@observium.org> > 22 August 2018 at 09:39 > Haha, new words for learn: zaebis', pizdetc > > I did not plan on writing it.. but a small insomnia :D > Mike Stupalov <mailto:mike@observium.org> > 22 August 2018 at 03:01 > Hi, > > do not post here links to an *nms urls/issues ;) > > Ricoh is very hidden vendor.. No ways for fetch latest private MIB. > > But I was added toner/ink discovery for Ricoh in r9379 :P > -- Mike Stupalov Observium Limited, http://observium.org

2 1

Custom OID Metric Conditions (now with 100% more attachment)
by Brandwatch NOC 22 Aug '18

22 Aug '18

Hi, The attached image shows some custom OIDs I have set up to monitor Juniper QFX VCP link status. These work fine and I see the custom graphs (gauges where state 1 = link up, state 0 = link down). The last bit I need to figure out is how to alert on them. I think I'm 90% of the way there. You can see the custom OIDs in the top browser window. In the bottom browser window, I'm unsure how to refer to the custom OIDs in the "conditions" bit. Any help gratefully accepted - I've got this far without bothering anyone but I've fallen at the last hurdle. Thanks! Chris -- Chris Tomkins Brandwatch | Senior Network Engineer (Linux/Network) christ(a)brandwatch.com | (+44) 01273 448 949 @Brandwatch New York | San Francisco | Brighton | Singapore | Berlin | Stuttgart Discover how organizations are using Brandwatch to create their own success <https://www.brandwatch.com/customer-success/> Email disclaimer <http://www.brandwatch.com/email-disclaimer/> [image: bw-signature logo.png]

1 0

Custom OID Metric Conditions
by Brandwatch NOC 22 Aug '18

22 Aug '18

Hi, The attached image shows some custom OIDs I have set up to monitor Juniper QFX VCP link status. These work fine and I see the custom graphs (gauges where state 1 = link up, state 0 = link down). The last bit I need to figure out is how to alert on them. I think I'm 90% of the way there. You can see the custom OIDs in the top browser window. In the bottom browser window, I'm unsure how to refer to the custom OIDs in the "conditions" bit. Any help gratefully accepted - I've got this far without bothering anyone but I've fallen at the last hurdle. Thanks! Chris -- Chris Tomkins Brandwatch | Senior Network Engineer (Linux/Network) christ(a)brandwatch.com | (+44) 01273 448 949 @Brandwatch New York | San Francisco | Brighton | Singapore | Berlin | Stuttgart Discover how organizations are using Brandwatch to create their own success <https://www.brandwatch.com/customer-success/> Email disclaimer <http://www.brandwatch.com/email-disclaimer/> [image: bw-signature logo.png]

1 0

Re: [Observium] Show ink levels for Ricoh printers
by Mike Stupalov 22 Aug '18

22 Aug '18

Hi, do not post here links to an *nms urls/issues ;) Ricoh is very hidden vendor.. No ways for fetch latest private MIB. But I was added toner/ink discovery for Ricoh in r9379 :P > Simon Mousey Smith <mailto:simonsmith5521@gmail.com> > 21 August 2018 at 16:48 > Hi All > > This is a message to ask people can they try these SNMP OIDs in the > link below on there Ricoh printers? > > We have a few Ricoh printers that just show SOME SPACE in observium > and would love to see values! > > I discovered this link by accident and they appear to be working on > our few printers! > > Currently using the printer-mib only reveilles -3, -2, -1 which isnt > helpful... > > But the link below uses ricohs private mib which appears to work! > > https://github.com/librenms/librenms/issues/4177#issuecomment-241957542 > > If they work for others, could the wonderful amazing observium team > implement these oids into the existing checker to show stats :) > > Regards > > Simon - Hestor Ltd > > > _______________________________________________ > observium mailing list > observium(a)observium.org > http://postman.memetic.org/cgi-bin/mailman/listinfo/observium -- Mike Stupalov Observium Limited, http://observium.org

2 2

Re: [Observium] db.log - Failed dbQuery
by Mike Stupalov 21 Aug '18

21 Aug '18

I think should be fixed in r9378. > Aaron Mayfield <mailto:amayfield@neverfail.com> > 21 August 2018 at 03:22 > > I recently noticed my db.log file had grown to 18GB in size (I noticed > because it filled my drive). It is filled by entries like this: > > [2018/08/20 14:11:56 -0500] poller.php(12451): Failed dbQuery (#1062 - > Duplicate entry '88-2320-005056a94437-223078' for key > 'dev_vlan_mac_port'), Query: INSERT INTO `vlans_fdb` > (`device_id`,`vlan_id`,`port_id`,`mac_address`,`fdb_status`) VALUES > ('88','2320','223078','005056a94437','') > > [2018/08/20 14:11:56 -0500] poller.php(12451): Failed dbQuery (#1062 - > Duplicate entry '88-3004-005056a93130-223078' for key > 'dev_vlan_mac_port'), Query: INSERT INTO `vlans_fdb` > (`device_id`,`vlan_id`,`port_id`,`mac_address`,`fdb_status`) VALUES > ('88','3004','223078','005056a93130','') > > [2018/08/20 14:11:56 -0500] poller.php(12451): Failed dbQuery (#1062 - > Duplicate entry '88-3031-0050565b341c-223078' for key > 'dev_vlan_mac_port'), Query: INSERT INTO `vlans_fdb` > (`device_id`,`vlan_id`,`port_id`,`mac_address`,`fdb_status`) VALUES > ('88','3031','223078','0050565b341c','') > > It continues to quickly grow and log entries all for different > devices/mac addresses/vlans. Anyone else run into this recently? > > Here is version info (I updated today to make sure there wasn’t a > recent fix): > > > > > > _______________________________________________ > observium mailing list > observium(a)observium.org > http://postman.memetic.org/cgi-bin/mailman/listinfo/observium -- Mike Stupalov Observium Limited, http://observium.org

2 1

Load Average alert
by Remco de h 21 Aug '18

21 Aug '18

Hi, Is it possible to create an load average alert if some threshold is reach? Thank you in advance. Regards, Remco

4 10

Show ink levels for Ricoh printers
by Simon Mousey Smith 21 Aug '18

21 Aug '18

Hi All This is a message to ask people can they try these SNMP OIDs in the link below on there Ricoh printers? We have a few Ricoh printers that just show SOME SPACE in observium and would love to see values! I discovered this link by accident and they appear to be working on our few printers! Currently using the printer-mib only reveilles -3, -2, -1 which isnt helpful... But the link below uses ricohs private mib which appears to work! https://github.com/librenms/librenms/issues/4177#issuecomment-241957542 <https://github.com/librenms/librenms/issues/4177#issuecomment-241957542> If they work for others, could the wonderful amazing observium team implement these oids into the existing checker to show stats :) Regards Simon - Hestor Ltd

1 0

Re: [Observium] db.log - Failed dbQuery
by Mike Stupalov 21 Aug '18

21 Aug '18

Hi, please attach polling debug for: ./poller.php -d -m fdb-table -h 88 > Aaron Mayfield <mailto:amayfield@neverfail.com> > 21 August 2018 at 03:22 > > I recently noticed my db.log file had grown to 18GB in size (I noticed > because it filled my drive). It is filled by entries like this: > > [2018/08/20 14:11:56 -0500] poller.php(12451): Failed dbQuery (#1062 - > Duplicate entry '88-2320-005056a94437-223078' for key > 'dev_vlan_mac_port'), Query: INSERT INTO `vlans_fdb` > (`device_id`,`vlan_id`,`port_id`,`mac_address`,`fdb_status`) VALUES > ('88','2320','223078','005056a94437','') > > [2018/08/20 14:11:56 -0500] poller.php(12451): Failed dbQuery (#1062 - > Duplicate entry '88-3004-005056a93130-223078' for key > 'dev_vlan_mac_port'), Query: INSERT INTO `vlans_fdb` > (`device_id`,`vlan_id`,`port_id`,`mac_address`,`fdb_status`) VALUES > ('88','3004','223078','005056a93130','') > > [2018/08/20 14:11:56 -0500] poller.php(12451): Failed dbQuery (#1062 - > Duplicate entry '88-3031-0050565b341c-223078' for key > 'dev_vlan_mac_port'), Query: INSERT INTO `vlans_fdb` > (`device_id`,`vlan_id`,`port_id`,`mac_address`,`fdb_status`) VALUES > ('88','3031','223078','0050565b341c','') > > It continues to quickly grow and log entries all for different > devices/mac addresses/vlans. Anyone else run into this recently? > > Here is version info (I updated today to make sure there wasn’t a > recent fix): > > > > > > _______________________________________________ > observium mailing list > observium(a)observium.org > http://postman.memetic.org/cgi-bin/mailman/listinfo/observium -- Mike Stupalov Observium Limited, http://observium.org

1 0

db.log - Failed dbQuery
by Aaron Mayfield 21 Aug '18

21 Aug '18

I recently noticed my db.log file had grown to 18GB in size (I noticed because it filled my drive). It is filled by entries like this: [2018/08/20 14:11:56 -0500] poller.php(12451): Failed dbQuery (#1062 - Duplicate entry '88-2320-005056a94437-223078' for key 'dev_vlan_mac_port'), Query: INSERT INTO `vlans_fdb` (`device_id`,`vlan_id`,`port_id`,`mac_address`,`fdb_status`) VALUES ('88','2320','223078','005056a94437','') [2018/08/20 14:11:56 -0500] poller.php(12451): Failed dbQuery (#1062 - Duplicate entry '88-3004-005056a93130-223078' for key 'dev_vlan_mac_port'), Query: INSERT INTO `vlans_fdb` (`device_id`,`vlan_id`,`port_id`,`mac_address`,`fdb_status`) VALUES ('88','3004','223078','005056a93130','') [2018/08/20 14:11:56 -0500] poller.php(12451): Failed dbQuery (#1062 - Duplicate entry '88-3031-0050565b341c-223078' for key 'dev_vlan_mac_port'), Query: INSERT INTO `vlans_fdb` (`device_id`,`vlan_id`,`port_id`,`mac_address`,`fdb_status`) VALUES ('88','3031','223078','0050565b341c','') It continues to quickly grow and log entries all for different devices/mac addresses/vlans. Anyone else run into this recently? Here is version info (I updated today to make sure there wasn’t a recent fix): [cid:image001.png@01D438B2.CD1274E0]

1 0

OID for Stulz WIB 8000
by Marco Froehlich 20 Aug '18

20 Aug '18

Hello! I am looking for the OID descriptions for a Stulz WIB 8000. Does anyone already have this? *Marco*

1 1