- observium - lists.observium.org

Large number of ports on switch? Juniper VC/VCF EX/QFX
by Paul Meys 15 Jul '14

15 Jul '14

Hi, I'm running into a problem when trying to view a junipersetup. It is a virtual chassis fabric with 2x QFX51 and 2x EX43 When you open the device, in the list of ports, the last ones don't appear: 2/0/14, ge-2/0/15, ge-2/0/16, ge-2/0/17, ge-2/0/18, ge-2/0/19, ge-2/0/20, ge-2/0/21, ge-2/0/22, ge-2/0/23, ge-2/0/24, ge-2/0/25, ge-2/0/26, ge-2/0/27, ge-2/0/28, ge-2/0/29, ge-2/0/30, ge-2/0/31, ge-2/0/32, ge-2/0/33, ge-2/0/34, ge-2/0/35, ge-2/0/36, ge-2/0/37, ge-2/0/38, ge-2/0/39, ge-2/0/40, ge-2/0/41, ge-2/0/42, ge-2/0/43, ge-2/0/44, ge-2/0/45, ge-2/0/46, ge-2/0/47, ge-2/0/0.0, xe-0/0/0, xe-0/0/2, xe-0/0/0.0, xe-0/0/2.0, xe-0/0/1, xe-0/0/1.0, xe-0/0/3, xe-0/0/3.0, xe-1/0/0, xe-1/0/0.0, xe-1/0/1, xe-1/0/1.0, xe-1/0/2, xe-1/0/2.0, xe-1/0/3, xe-1/0/3.0, , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , When I click on "Ports": I have a lot of "empty" rows at the end. I also added a trunk-interface ( ae0 ) with does not appear in the list. Is it possible the QFX/ex4300 is not yet recognised ? I also have a (Juniper) switch with almost 600 ports with almost the same problem. ( 10x EX4200 ) Is there a port-limit ? Thank you Kind regards, Paul Paul Meys Milla-IT - creative minds think alike Berkenrodelei 51 2660 Hoboken-Belgium paul(a)milla-it.be<mailto:paul@milla-it.be> http://www.milla-it.be<http://www.milla-it.be/> BE 0892.650.418 +32 498 62 19 94 IT: Hosting / Security / Network / Consultancy ?

3 3

high CPU / slow response
by Paul Meys 15 Jul '14

15 Jul '14

Hi, I'm running the latest version, but it is extremely slow. Even to load the login-page, it takes a very long time. I always see mysqld using almost all CPU-power. the server is running in vmware, os = debian. Currently I have one v-core assigned with 16G of ram. ( already tried with 4 cores.. ) In Observium I have 75 devices with a total of 7500 ports. Please advice ;-) Thank you, Have a good day, Paul

5 9

Re: [Observium] Observium] Move my monitoring system
by Adam Armstrong 14 Jul '14

14 Jul '14

And don't forget to disable the old server if it auto updates, else the account may get blocked :) Adam. Tom Laermans wrote:

1 0

Move my monitoring system
by Ryan Milton 14 Jul '14

14 Jul '14

Hi, I am having to move my Observium installation to a new server. I have the paid version of Observium, and am basically taking an older version and want to use my existing license. What is the proper path to make this move? Thanks, Ryan

2 3

Observium Capacity for large networks
by Daniel Josue Rodriguez Paiz 14 Jul '14

14 Jul '14

Hello, I'm interested on using Observium Pro to monitoring a large network of 15,000 devices more or less. Does anyone know if observium works fine in a large network? Thanks in advance for your replies.

7 11

Three phase UPS, [SEC=UNCLASSIFIED]
by Peter.Hine＠familycourt.gov.au 14 Jul '14

14 Jul '14

Does anyone else have a three phase ups. I was wanting to know if it is using the UPS-MIB and that you've done something to get all three phases shown as graphs ? I've done a debug on the discovery and it is clear that all phases are returned by the bulkwalk statements. so far i've created ./html/images/os/emerson.png and ./includes/polling/os/emerson.inc.php and added to my config.php the following: $os = "emerson"; $config['os'][$os]['text'] = "Emerson UPS"; $config['os'][$os]['type'] = "power"; $config['os'][$os]['over'][0]['graph'] = "device_voltage"; $config['os'][$os]['over'][0]['text'] = "Voltage"; $config['os'][$os]['over'][1]['graph'] = "device_current"; $config['os'][$os]['over'][1]['text'] = "Current"; $config['os'][$os]['over'][2]['graph'] = "device_frequency"; $config['os'][$os]['over'][2]['text'] = "Frequency"; $config['os'][$os]['sysObjectID'][] = ".1.3.6.1.2.1.33"; $config['os'][$os]['mibs'][] = "UPS-MIB"; root@dc3monitor2:/opt/observium# snmpwalk dc6ups01 -v2c -c xxxxx -M /opt/observium/mibs -m UPS-MIB upsMIB UPS-MIB::upsIdentManufacturer.0 = STRING: Chloride UPS-MIB::upsIdentModel.0 = STRING: 80Net UPS-MIB::upsIdentUPSSoftwareVersion.0 = STRING: 10h01517 V4.00.100312 (5135) / 10h01531 V1.10.100326,10h01530 V UPS-MIB::upsIdentAgentSoftwareVersion.0 = STRING: 3.15.3397 UPS-MIB::upsIdentName.0 = STRING: dc6ups01 UPS-MIB::upsIdentAttachedDevices.0 = STRING: none UPS-MIB::upsBatteryStatus.0 = INTEGER: batteryNormal(2) UPS-MIB::upsSecondsOnBattery.0 = INTEGER: 0 seconds UPS-MIB::upsEstimatedMinutesRemaining.0 = INTEGER: 164 minutes UPS-MIB::upsEstimatedChargeRemaining.0 = INTEGER: 100 percent UPS-MIB::upsBatteryVoltage.0 = INTEGER: 5440 0.1 Volt DC UPS-MIB::upsBatteryCurrent.0 = INTEGER: 2 0.1 Amp DC UPS-MIB::upsBatteryTemperature.0 = INTEGER: 19 degrees Centigrade UPS-MIB::upsInputLineBads.0 = Counter32: 56 UPS-MIB::upsInputNumLines.0 = INTEGER: 3 UPS-MIB::upsInputFrequency.1 = INTEGER: 499 0.1 Hertz UPS-MIB::upsInputFrequency.2 = INTEGER: 499 0.1 Hertz UPS-MIB::upsInputFrequency.3 = INTEGER: 499 0.1 Hertz UPS-MIB::upsInputVoltage.1 = INTEGER: 245 RMS Volts UPS-MIB::upsInputVoltage.2 = INTEGER: 245 RMS Volts UPS-MIB::upsInputVoltage.3 = INTEGER: 243 RMS Volts UPS-MIB::upsInputCurrent.1 = INTEGER: 30 0.1 RMS Amp UPS-MIB::upsInputCurrent.2 = INTEGER: 30 0.1 RMS Amp UPS-MIB::upsInputCurrent.3 = INTEGER: 31 0.1 RMS Amp UPS-MIB::upsInputTruePower.1 = INTEGER: 7500 Watts UPS-MIB::upsInputTruePower.2 = INTEGER: 7500 Watts UPS-MIB::upsInputTruePower.3 = INTEGER: 7700 Watts UPS-MIB::upsOutputSource.0 = INTEGER: normal(3) UPS-MIB::upsOutputFrequency.0 = INTEGER: 499 0.1 Hertz UPS-MIB::upsOutputNumLines.0 = INTEGER: 3 UPS-MIB::upsOutputVoltage.1 = INTEGER: 241 RMS Volts UPS-MIB::upsOutputVoltage.2 = INTEGER: 239 RMS Volts UPS-MIB::upsOutputVoltage.3 = INTEGER: 239 RMS Volts UPS-MIB::upsOutputCurrent.1 = INTEGER: 384 0.1 RMS Amp UPS-MIB::upsOutputCurrent.2 = INTEGER: 288 0.1 RMS Amp UPS-MIB::upsOutputCurrent.3 = INTEGER: 328 0.1 RMS Amp UPS-MIB::upsOutputPower.1 = INTEGER: 7900 Watts UPS-MIB::upsOutputPower.2 = INTEGER: 6200 Watts UPS-MIB::upsOutputPower.3 = INTEGER: 7200 Watts UPS-MIB::upsOutputPercentLoad.1 = INTEGER: 27 percent UPS-MIB::upsOutputPercentLoad.2 = INTEGER: 20 percent UPS-MIB::upsOutputPercentLoad.3 = INTEGER: 23 percent UPS-MIB::upsAlarmsPresent.0 = Gauge32: 0 UPS-MIB::upsTestId.0 = OID: UPS-MIB::upsTestNoTestsInitiated UPS-MIB::upsTestSpinLock.0 = INTEGER: 53 UPS-MIB::upsTestResultsSummary.0 = INTEGER: 1082939236 UPS-MIB::upsTestResultsDetail.0 = STRING: UPS-MIB::upsTestStartTime.0 = Timeticks: (0) 0:00:00.00 UPS-MIB::upsTestElapsedTime.0 = Wrong Type (should be INTEGER): Timeticks: (654440200) 75 days, 17:53:22.00 UPS-MIB::upsShutdownType.0 = INTEGER: 0 UPS-MIB::upsShutdownAfterDelay.0 = INTEGER: 0 seconds UPS-MIB::upsStartupAfterDelay.0 = INTEGER: 0 seconds UPS-MIB::upsRebootWithDuration.0 = INTEGER: 0 seconds UPS-MIB::upsAutoRestart.0 = INTEGER: 0 UPS-MIB::upsConfigInputVoltage.0 = INTEGER: 240 RMS Volts UPS-MIB::upsConfigInputFreq.0 = INTEGER: 500 0.1 Hertz UPS-MIB::upsConfigOutputVoltage.0 = INTEGER: 240 RMS Volts UPS-MIB::upsConfigOutputFreq.0 = INTEGER: 500 0.1 Hertz UPS-MIB::upsConfigOutputVA.0 = INTEGER: 99900 Volt-Amps UPS-MIB::upsConfigOutputPower.0 = INTEGER: 90000 Watts UPS-MIB::upsConfigLowBattTime.0 = INTEGER: 0 minutes UPS-MIB::upsConfigAudibleStatus.0 = INTEGER: 0 UPS-MIB::upsConfigLowVoltageTransferPoint.0 = INTEGER: 168 RMS Volts UPS-MIB::upsConfigHighVoltageTransferPoint.0 = INTEGER: 274 RMS Volts thanks Peter Hine Senior Technical Support Engineer (Servers) FCoA ITS peter.hine(a)familycourt.gov.au ********************************************************************** The information contained in this e-mail (including any attachments) is for the exclusive use of the addressee. If you are not the intended recipient please notify the sender immediately and delete this e-mail. It is noted that legal privilege is not waived because you have read this e-mail. **********************************************************************

3 5

install not quite complete
by Dave Boulter 14 Jul '14

14 Jul '14

Hi, Have the web interface up and running and one device is discovered. When I click on that it says the devices is not found. When I look in the html directory id don't see any devices file or subdirectory, any ideas? -- Dave Boulter TechRemedy o 02 8213 6187 | f 02 8213 6204 | m 0417 705 997 e dave.boulter(a)techremedy.com.au<mailto:dave.boulter@techremedy.com.au> | w www.techremedy.com.au<http://www.techremedy.com.au/>

3 3

OID Questions
by Andrés™ 12 Jul '14

12 Jul '14

Hi, I just installed observium and it's really great. I would like to know if it is posible to add SNR (Signal2Noise) and Cable Modem registered for my Cisco CMTS ubr7225. I have Cacti graphs with these oids: Example: CM count = 1.3.6.1.4.1.9.9.116.1.4.1.1.5.1182 SNR: 1.3.6.1.2.1.10.127.1.1.4.1.5.1182 Thank you in advance.

1 0

About hiding "Same subnet" details for user accounts
by Yavor Buyukliev 11 Jul '14

11 Jul '14

Hi List, is there any way to disable "Same subnet" details on interface for user accounts, or globally for all? I try to set $config['web_show_disabled'] = TRUE; in my config.php, but can't see any change at all. Best regards!

2 6

PowerConnect 5548
by Josh Hopper 11 Jul '14

11 Jul '14

I love the update you guys did in May/June. My PowerConnect 6224 switches have major improvements in what they graph. However, my PowerConnect 5548 switch has a draw error on everything but bandwidth. Is there a way to resolve this? -- Sincerely, Joshua Hopper, A+ CE Network Administrator 420 3rd Ave NW Hickory NC 28601 Office: 828-449-1839x2160 | Cell: 828-855-7565 Protect Plus Air Holdings, LLC and Affiliates, Protect Plus, LLC and Affiliates, Imagine One Resources, LLC and Affiliates, Protect Plus Surfaces, LLC and Affiliates Confidentiality Notice: This e-mail is intended only for the addressee named above. It contains information that is privileged, confidential or otherwise protected from use and disclosure. If you are not the intended recipient, you are hereby notified that any review, disclosure, copying, or dissemination of this transmission, or taking of any action in reliance on its contents, or other use is strictly prohibited. If you have received this transmission in error, please reply to the sender listed above immediately and permanently delete this message from your inbox. Thank you for your cooperation.

3 6