- observium - lists.observium.org

Re: [Observium] Optical Monitoring (DOM/DDM) on Brocade Switches
by Adam Armstrong 08 Feb '13

08 Feb '13

I added support for juniper-dom-mib a week or two ago, the sensors go in the same table as the other sensors, and there's also a per-port sensors tab. Cisco enumerate all of their sensors in cisco-entity-sensor-mib, so that has been done for many years :-) Adam Morgan McLean <wrx230(a)gmail.com> wrote: >_______________________________________________ >observium mailing list >observium(a)observium.org >http://postman.memetic.org/cgi-bin/mailman/listinfo/observium

1 0

Optical Monitoring (DOM/DDM) on Brocade Switches
by Matthias Cramer 08 Feb '13

08 Feb '13

Hi All After my mail this morning I could not wait and implemented it. Attached are the 3 necessary file in a tgz archive. I should work on XMR/MLX/CER and probably CSR (probably others). It does deffenetly not work on RX and FWS. I'm in contact with Brocade to find out a solution to do the same on RX switches. @Adam: Would be very nice if you could include it in svn. Regards Matthias -- Matthias Cramer / mc322-ripe Senior Network & Security Engineer iway AG Phone +41 43 500 1111 Badenerstrasse 569 Fax +41 44 271 3535 CH-8048 Zürich http://www.iway.ch/ GnuPG 1024D/2D208250 = DBC6 65B6 7083 1029 781E 3959 B62F DF1C 2D20 8250

3 3

Optical Monitoring (DOM/DDM) on Brocade Switches
by Matthias Cramer 08 Feb '13

08 Feb '13

Hi All Has there already been an effort to implement Optical Monitoring for Brocade (or any other Vendor)? Would be relay nice to have some graphs of RX and TX power and the module temperature. Regards Matthias -- Matthias Cramer / mc322-ripe Senior Network & Security Engineer iway AG Phone +41 43 500 1111 Badenerstrasse 569 Fax +41 44 271 3535 CH-8048 Zürich http://www.iway.ch/ GnuPG 1024D/2D208250 = DBC6 65B6 7083 1029 781E 3959 B62F DF1C 2D20 8250

1 0

Hosting/server/device donation.
by Adam Armstrong 08 Feb '13

08 Feb '13

Hi All, We've had quite a few offers of hosting recently, so I thought I'd explain why we don't take them and give some suggestions on else people could do instead. Firstly, we don't accept offers of hosting for the websites and repository of the project because we don't want to be beholden to anyone who could change their minds. It would likely cause significant disruption if we were to have the plug pulled on a donated server out of the blue! One of the big problems with writing and maintaining something like Observium is that it's difficult to ensure that everything works after changes. As we refactor code and add new features, support for specific devices sometimes acquires bugs or simply stops working. So one of the things which would be helpful would be access to various kinds of devices to add to the http://demo.observium.org installation both to better advertise the features of Observium as well as making sure bugs are found more quickly. For example, thanks to the SNMP access to a 7200 recently provided by Crosstel, we'll soon fix some bugs that left the Cisco MAC accounting feature broken since we switched to using MySQL memory tables for state. :) Thanks, adam. (also, don't forget to give us all of your cash because we are awesome, ok?)

2 2

New front page format
by David Brodbeck 06 Feb '13

06 Feb '13

Just wanted to say that I really like the new front page format. Alerts are displayed much more compactly *and* with more useful information, which is a nice trick. I did turn off the map, though, since everything I monitor is at one site. -- David Brodbeck System Administrator, Linguistics University of Washington

1 0

Re: [Observium] Configuration Step Required
by Adam Armstrong 05 Feb '13

05 Feb '13

The application and Unix agent functionality is current in alpha, and not suitable for general use. If you can't make it work yourself, dont even try :-) Ravindra Gupta <ravindragupta9(a)gmail.com> wrote: >Dear Adam, > >Any application required from client side to lookup the server like >nrpe, nsclient etc. > >On 2/6/13, Ravindra Gupta <ravindragupta9(a)gmail.com> wrote: >> Thanks Adam. >> >> On Tue, Feb 5, 2013 at 11:58 PM, Adam Armstrong <adama(a)memetic.org> wrote: >> >>> SNMP agent configuration is dependent upon the device's os. >>> >>> We don't provide documentation for this, ask your vendor, or read the >>> documentation for net-snmp if you're using Linux. >>> >>> Adam. >>> >>> >>> Ravindra Gupta <ravindragupta9(a)gmail.com> wrote: >>> >>> >>> Dear Adam, >>> >>> can you provide me configuration step or any website url in which totally >>> define i.e how to configured server as well as client to observium. >>> >>> >>> >>> On Tue, Feb 5, 2013 at 10:40 PM, Adam Armstrong <adama(a)memetic.org> >>> wrote: >>> >>>> >>>> If you follow the install guide properly, it will work. >>>> >>>> adam. >>>> >>>> On Tue, 5 Feb 2013 23:17:56 +0530, Ravindra Gupta >>>> <ravindragupta9(a)gmail.com> wrote: >>>> > Dear Team, >>>> > >>>> > I have installed observium opensource using svn trunk in Linux system, >>>> when >>>> > we have called webpage on url the page display totally blank. >>>> > >>>> > Can you provide me installation document for server side as well as >>>> client >>>> > side. >>>> _______________________________________________ >>>> observium mailing list >>>> observium(a)observium.org >>>> http://postman.memetic.org/cgi-bin/mailman/listinfo/observium >>>> >>> >>> >>> >>> >>> _______________________________________________ >>> observium mailing list >>> observium(a)observium.org >>> http://postman.memetic.org/cgi-bin/mailman/listinfo/observium >>> >>> >> >> >> -- >> >> >> Thanks & Regards, >> Ravindra Gupta >> Linux Server Admin >> 91-9773596807 >> Skype ID:- ravindragupta9 >> > > >-- > > >Thanks & Regards, >Ravindra Gupta >Linux Server Admin >91-9773596807 >Skype ID:- ravindragupta9 >_______________________________________________ >observium mailing list >observium(a)observium.org >http://postman.memetic.org/cgi-bin/mailman/listinfo/observium

1 0

Re: [Observium] Configuration Step Required
by Adam Armstrong 05 Feb '13

05 Feb '13

SNMP agent configuration is dependent upon the device's os. We don't provide documentation for this, ask your vendor, or read the documentation for net-snmp if you're using Linux. Adam. Ravindra Gupta <ravindragupta9(a)gmail.com> wrote: >_______________________________________________ >observium mailing list >observium(a)observium.org >http://postman.memetic.org/cgi-bin/mailman/listinfo/observium

2 2

Force10 CPU Usage
by Alex Vitola 05 Feb '13

05 Feb '13

High cpu usage (caused by snmp process) in a F10 S4810 is impacting on network performance. Anyone had any similar problem?

2 1

Issues monitoring an SRX cluster
by Jacob Gardiner 01 Feb '13

01 Feb '13

Hi all, Firstly - Cheers Adam et all for the development. I'm looking to see if anybody has had any luck properly monitoring a Juniper SRX cluster. We've got a couple up and running at the moment, in addition to some J-series units that we'll probably replace with another pair of SRXs in the future but we've been running into some issues. Basically when adding the host to observium, everything works a treat as usual. Devices get detected properly, node0 & node1's routing engines get detected properly and we can see two different graphs for each in relation to processor, memory, temperature etc. However when polling the interfaces, we get a zero response for bps. This behavior happens on all interfaces except the lo0.X interfaces and fxpX interfaces. (They show graphs and results). I've run a poll via cmdline with the -d flag and can see that the poller is definitely seeing a 0 response from all of the other interfaces, output looks something like: <paste> SQL[INSERT INTO `ports-state` (`port_id`) VALUES ('2151')] state inserted SQL[UPDATE `ports-state` set `poll_time` ='1359075465',`poll_period` ='153',`ifInOctets` ='',`ifInOctets_rate` ='0',`ifInOctets_delta` ='0',`ifOutOctets` ='',`ifOutOctets_rate` ='0',`ifOutOctets_delta` ='0',`ifInErrors` ='',`ifInErrors_rate` ='0',`ifInErrors_delta` ='0',`ifOutErrors` ='',`ifOutErrors_rate` ='0',`ifOutErrors_delta` ='0',`ifInUcastPkts` ='',`ifInUcastPkts_rate` ='0',`ifInUcastPkts_delta` ='0',`ifOutUcastPkts` ='',`ifOutUcastPkts_rate` ='0',`ifOutUcastPkts_delta` ='0',`ifInOctets_perc` ='0',`ifOutOctets_perc` ='0',`ifOctets_rate` ='0',`ifUcastPkts_rate` ='0',`ifErrors_rate` ='0' WHERE `port_id` = '2151'] 1 updated Port reth0(568) VLAN == ifInOctets (0 B) 0 Bps 153 secs ifOutOctets (0 B) 0 Bps 153 secs ifInErrors (0 B) 0 Bps 153 secs ifOutErrors (0 B) 0 Bps 153 secs ifInUcastPkts (0 B) 0 Bps 153 secs ifOutUcastPkts (0 B) 0 Bps 153 secs bps(0bps/0bps)bytes(0B/0B)pkts(0pps/0pps)OK u:0.00 s:0.03 r:50.09 </paste> My first impression is that it's the MIB incorrectly polling the device, Can anybody confirm? Cheers, JG

2 4

health graphs missing
by Norman Daniel 31 Jan '13

31 Jan '13

Hi good day, I was wondering why the health graphs are missing for some devices? Regards, cid:5A2BFBA1-C1AC-4588-9E43-ADB44DDC1905 Mr. Norman U. Daniel IT Helpdesk CFJA CALL CENTRE CORPORATION Unit 258, Wellington Building, Plaza Lorenzo Ruiz, Binondo, Metro Manila, 1006 Philippines Phone: +63 2 242 0520 / +61 2 8355 3931 Fax: +63 2 857 2227 / +61 2 8569 0930 Mobile: +63 926 7455617 Email: <mailto:norman.daniel@cfjacallcentre.com> norman.daniel(a)cfjacallcentre.com Skype: cfjacc.ops.norman.daniel Web: <http://www.cfjacallcentre.com/> http://www.cfjacallcentre.com

2 1