- observium - lists.observium.org

VMware ESXi hosts missing information
by Matt Hucker 21 Mar '13

21 Mar '13

Hi all, I'm using Observium r3791 to monitor a few VMware ESXi 5.1 hosts along with a mix of servers and network gear. All seems to be running well, except for the ESX hosts. When Observium polls the ESX hosts it seems to be missing a lot of information due to missing MIBs: My /etc/snmp/snmpd.conf has the mibdirs line as per the installation instructions. mibdirs /opt/observium/mibs It seems if I copy all of the mibs from the /opt/observium/mibs directory to /usr/share/mibs, then the poller seems to run OK. No more missing module errors. Is this expected behaviour? Partial debug poller output below: Observium Poller v0.13.3.3784 DEBUG! Starting polling run: SQL[SELECT `device_id` FROM `devices` WHERE `disabled` = 0 AND `hostname` LIKE 'esx01%' ORDER BY `device_id` ASC] SQL[SELECT * FROM `devices` WHERE `device_id` = '11'] SQL[SELECT * FROM devices_attribs WHERE `device_id` = '11'] esx01.prod.nrhosted.com 11 vmware DEBUG: SNMP Auth options = -v2c -c esx01 /usr/bin/snmpget -v2c -c esx01 -Oqv -m SNMPv2-MIB -M /opt/observium/mibs udp:esx01.prod.nrhosted.com:161 sysObjectID.0 SNMPv2-SMI::enterprises.6876.4.1 RRD[update /opt/observium/rrd/esx01.prod.nrhosted.com/status.rrd N:1] OK u:0.01 s:0.00 r:0.07 RRD[update /opt/observium/rrd/esx01.prod.nrhosted.com/ping.rrd N:1.08] OK u:0.02 s:0.00 r:0.07 RRD[update /opt/observium/rrd/esx01.prod.nrhosted.com/ping_snmp.rrd N:46.31] DEBUG: SNMP Auth options = -v2c -c esx01 /usr/bin/snmpget -v2c -c esx01 -OQUs -m +VMWARE-ROOT-MIB:VMWARE-SYSTEM-MIB -M +/opt/observium/mibs/vmware udp:esx01.prod.nrhosted.com:161 VMWARE-SYSTEM-MIB::vmwProdName.0 VMWARE-SYSTEM-MIB::vmwProdVersion.0 VMWARE-SYSTEM-MIB::vmwProdBuild.0 MIB search path: /root/.snmp/mibs:/usr/share/mibs/site:/usr/share/snmp/mibs:/usr/share/mibs/iana:/usr/share/mibs/ietf:/usr/share/mibs/netsnmp:/opt/observium/mibs/vmware The first call to snmpget has the correct MIB path (/opt/observium/mibs), but the 2nd call to snmpget seems to only include the /opt/observium/mibs/vmware (leaving out /opt/observium/mibs) Consequently I get a lot of errors such as these: Cannot find module (SNMPv2-TC): At line 10 in /usr/share/mibs/netsnmp/UCD-DLMOD-MIB Cannot find module (SNMPv2-SMI): At line 34 in /usr/share/mibs/netsnmp/UCD-SNMP-MIB Cannot find module (SNMPv2-TC): At line 37 in /usr/share/mibs/netsnmp/UCD-SNMP-MIB Did not find 'enterprises' in module #-1 (/usr/share/mibs/netsnmp/UCD-SNMP-MIB) Did not find 'DisplayString' in module #-1 (/usr/share/mibs/netsnmp/UCD-SNMP-MIB) Did not find 'TruthValue' in module #-1 (/usr/share/mibs/netsnmp/UCD-SNMP-MIB) -- Cheers, Matt.

3 3

Observium r3779
by Laurens Vets 20 Mar '13

20 Mar '13

Hello, Quick question about the new interface. All 'toolbars' now seem to have an arrow. When I hover over them, should that normally open a list?

1 1

zfs file system size wrong listed
by Mihai - Cristian Satmarean 20 Mar '13

20 Mar '13

Hi all, I have a zfs filesystem on OpenIndiana that is 25 TB and occupancy is around 90%. Observium correctly recognizes most of the OpenIndiana features, but the size of this filesystem is reported around 1.5 Tb. Is there something I can do to fix it? Thank you!

4 13

new device if possible
by Mihai - Cristian Satmarean 19 Mar '13

19 Mar '13

Hi, we have this clima for servers *Stulz GmbH Klimatechnik WIB 8000* Operating System Generic Device Contact local admin Location aircondition what should we do to have it in the Observium. Observium seems cooler and cooler for us. Thanks !

2 1

Re: [Observium] Fwd: [Observium-dev] r3775 - observer/trunk/includes/discovery/os
by Adam Armstrong 19 Mar '13

19 Mar '13

All future HP kit is comware. I.e. descended from h3c kit they bought. Of course it all gets the pro curve brand even if they share nothing in common. Tom Laermans <tom.laermans(a)powersource.cx> wrote: >_______________________________________________ >observium mailing list >observium(a)observium.org >http://postman.memetic.org/cgi-bin/mailman/listinfo/observium

2 1

Huawei Neighbours
by Ciro Iriarte 18 Mar '13

18 Mar '13

Hi!, is there any project to improve Huawei network gear support?, currently there is some useful info that's missing, for example the neighbours view that we have with Cisco/CDP Huawei supports LLDP but that info is no available currently (rev3745). Regards, -- Ciro Iriarte http://cyruspy.wordpress.com --

3 4

Re: [Observium] Plz need suppor ...
by Adam Armstrong 17 Mar '13

17 Mar '13

Stop spamming. You have disqualified yourself from any assistance fronts de team by spamming this list, the bugtracker/code-reviewer and my blog. Most of these are things you could work out by your self. Being impatient and acting like an entitled douche has not helped you. Adam. Rizwan Tw1 <riz.tw1(a)gmail.com> wrote: >_______________________________________________ >observium mailing list >observium(a)observium.org >http://postman.memetic.org/cgi-bin/mailman/listinfo/observium

1 0

Plz need suppor ...
by Rizwan Tw1 17 Mar '13

17 Mar '13

Hi all, Can any one please confirm about the mentioned below detials are supported over observium . - Interface monitoring ( All ypes of pors as STM's, FE , GE , XGE , etc - device statisics (CPU, Memory , etc ) - IPSLA MIB support - QOS/COS support - RRD suuport - Format of files relaed to data of graphs - VPN/neighbour prefix details - Status of Routing protocols -How much of Hardware requirement will be needed for monitoring of about 50 Routers along with 150 L3/L2 switches considering polling time for about 5 min. As an average routers have about 20 ports nd L3 switches with about 40 ports eachs, nd layer switches have 25 ports. - How actually network discovery works for observium ? I mean do I have to just enable SNMP with same community and same Snmp version on all my devices so that observium can discover my whole network and does observium also show me the whole map for my network ( connectivity b/w my devices) and most important do i need to make any device as Seed device for my network ? from which it will automatically penetrate to whole network...Further more after discovering of my device can i filter those graphs so that I can only plot useful or main graphs - Can I also make groups to those graphs I mean is it possible that I can make a separate tab for my roters and the \n separate tab for switches etc. Thanks Muhammad Rizwan Azher

1 0

Help | Observium support
by Rizwan Tw1 17 Mar '13

17 Mar '13

Hi all, Can any one please confirm about the mentioned below detials are supported over observium . - Interface monitoring ( All ypes of pors as STM's, FE , GE , XGE , etc - device statisics (CPU, Memory , etc ) - IPSLA MIB support - QOS/COS support - RRD suuport - Format of files relaed to data of graphs - VPN/neighbour prefix details - Status of Routing protocols How much of Hardware requirement will be needed for monitoring of about 50 Routers along with 150 L3/L2 switches considering polling time for about 5 min. As an average routers have about 20 ports nd L3 switches with about 40 ports eachs, nd layer switches have 25 ports. Thanks Muhammad Rizwan Azher

2 3

Application Stats
by Ciro Iriarte 16 Mar '13

16 Mar '13

Hi!, what's the state of application data collection?. I had stats for mysql and apache on my original install, but after it's reincarnation the application collection doesn't seem to work any more, was that moved to the unix agent? We would like to include application counters to observium and most of them are custom developments. Today we have cacti installs everywhere, but having all that info in one place would be great. Regards, -- Ciro Iriarte http://cyruspy.wordpress.com --

1 0