- observium - lists.observium.org

Custom script on alert
by Franjo Posavec 27 May '14

27 May '14

Hi, We are planning to suscribe to ObserviumPro, and vondering if is possible to run custom script for alerting? scrip will trigger custom asterisk script to make gsm call. Best regards, -- Franjo Posavec system administrator entitas d.o.o. T: +385 (0)40 600 002 S: franjo.posavec

2 1

4k displays
by Adam Armstrong 27 May '14

27 May '14

Hi All, Are any of you running 4k displays yet? We've been thinking about how to handle larger displays and were considering jumping straight from the existing 1280px wide to 3840px rather than building a 'widescreen' mode on 1920px. I think it would be most noticeable in the amount and resolution of the graphs we could display. We could effectively fit twice the amount of data into each graph. It would probably require quite a lot of work, so it's important we get the resolution correct! (no, i don't care about your macbook pro's silly resolution) adam.

2 4

device reboot
by Charlie Burns 26 May '14

26 May '14

Hello, This morning 2 XR devices randomly flagged on observium as rebooted. Both devices asr9001 running XR 4.3.4 have 2 week uptimes and no events this morning. Thanks, Charlie Burns

5 8

cosmetic question
by Ray, Bjoern Karsten 26 May '14

26 May '14

Hi there, I have two routers in different location connected over IPSEC-VPN. Both devices are actively monitored which works fine. Now I am wondering how to make this interconnect visible on the map. Is there an option I have overseen? Alternatively if IPSEC isn't "supported" in this way what protocols would result in a visible connection? Thanks in advance! Björn

2 1

Feature request: Firewall flow statistics
by Erwin Heringa 26 May '14

26 May '14

Hi all, We would like to graph the amount of sessions through our Juniper SRX firewalls with Observium. (snmp oid: .1.3.6.1.4.1.2636.3.39.1.12.1.1.1.6.0) It would be a really nice feature and in the past (when we used cacti) it has helped us detecting a problem with software on one of our servers. I'd really like to see that in Oberservium and maybe others can benefit as well. Met vriendelijke groet, kind regards, Erwin Heringa SIDN | Meander 501 | 6825 MD | Postbus 5022 | 6802 EA | ARNHEM T +31 (0)26 352 55 59 | F +31 (0)26 352 55 05 erwin.heringa(a)sidn.nl | www.sidn.nl

1 0

missing port description in traffic bills edit mode
by Andre Mamitzsch 26 May '14

26 May '14

Hi, I just wanted to change a traffic bill and delete a port, if editing the traffic bill, the port list on the right hand side shows only the delete button but no port description. I found that in revision 5521 and verified it with Firefox, Chrome and Safari. So it does not seem to be browser specific. Could you please look into it ? Regards, Andre

2 1

Transceiver Power error in fiber interface
by Zafar Pravaiz 24 May '14

24 May '14

Hi After upgrading to latest observium i start getting loads of following errors. I don't understand is this a threshold set problem or some IOS bug? Can some one please shed some light? Observium :: Network Observation and Monitoring Dbm Alarm: sfsw1 Te2/1 Receive Power Sensor - TenGigabitEthernet2/1 Receive Power Sensor is over threshold: -2.5dBm (> -40dBm) Observium :: Network Observation and Monitoring Dbm Alarm: sfsw1 Te2/2 Receive Power Sensor - TenGigabitEthernet2/2 Receive Power Sensor is over threshold: -2.6dBm (> -40dBm) Observium :: Network Observation and Monitoring Voltage Alarm: sfsw1 Te2/1 Supply Voltage Sensor - TenGigabitEthernet2/1 Supply Voltage Sensor is over threshold: 0V (> 0V) Observium :: Network Observation and Monitoring Dbm Alarm: sfsw2 Te2/1 Receive Power Sensor - TenGigabitEthernet2/1 Receive Power Sensor is over threshold: -2.8dBm (> -40dBm) Observium :: Network Observation and Monitoring Dbm Alarm: coresw1.aus.edu Te5/4 Receive Power Sensor - TenGigabitEthernet5/4 Receive Power Sensor is over threshold: 0dBm (> -40dBm) SFSW1#sh interfaces transceiver detail Transceiver monitoring is disabled for all interfaces. mA: milliamperes, dBm: decibels (milliwatts), NA or N/A: not applicable. ++ : high alarm, + : high warning, - : low warning, -- : low alarm. A2D readouts (if they differ), are reported in parentheses. The threshold values are calibrated. High Alarm High Warn Low Warn Low Alarm Temperature Threshold Threshold Threshold Threshold Port (Celsius) (Celsius) (Celsius) (Celsius) (Celsius) ---------- ------------------ ---------- --------- --------- --------- Te2/1 29.5 ++ 0.0 0.0 0.0 0.0 Te2/2 29.1 ++ 0.0 0.0 0.0 0.0 High Alarm High Warn Low Warn Low Alarm Voltage Threshold Threshold Threshold Threshold Port (Volts) (Volts) (Volts) (Volts) (Volts) ---------- --------------- ---------- --------- --------- --------- Te2/1 0.00 0.00 0.00 0.00 0.00 Te2/2 0.00 0.00 0.00 0.00 0.00 High Alarm High Warn Low Warn Low Alarm Current Threshold Threshold Threshold Threshold Port (milliamperes) (mA) (mA) (mA) (mA) ---------- ----------------- ---------- --------- --------- --------- Te2/1 6.1 ++ 0.0 0.0 0.0 0.0 Te2/2 6.7 ++ 0.0 0.0 0.0 0.0 Optical High Alarm High Warn Low Warn Low Alarm Transmit Power Threshold Threshold Threshold Threshold Port (dBm) (dBm) (dBm) (dBm) (dBm) ---------- ----------------- ---------- --------- --------- --------- Te2/1 -2.9 ++ -40.0 -40.0 -40.0 -40.0 Te2/2 -2.6 ++ -40.0 -40.0 -40.0 -40.0 Optical High Alarm High Warn Low Warn Low Alarm Receive Power Threshold Threshold Threshold Threshold Port (dBm) (dBm) (dBm) (dBm) (dBm) ---------- ----------------- ---------- --------- --------- --------- Te2/1 -2.5 ++ -40.0 -40.0 -40.0 -40.0 Te2/2 -2.6 ++ -40.0 -40.0 -40.0 -40.0 Thanks -- *Zafar Pravaiz *IT Senior Systems Engineer Information Technology Department AUS /> </span><span style='font-size:10.0pt;font-family:Times;mso-bidi-font-family: Tel +971 6 515 2164 Fax +971 6515 2112 American University of Sharjah PO Box 26666, Sharjah United Arab Emirates http://www.aus.edu <http://www.aus.edu/> zpravaiz(a)aus.edu <mailto:youremail@aus.edu>

6 9

FW: SNMP unreachable
by Micah Young 23 May '14

23 May '14

Hi Currently I am able to run an snmpwalk on my devices from bash, however all devices appear down in my Observium instance due to snmp. Does anyone have any ideas as to why this may be the case? -Mike Y. ARDEN A Global Company Celebrating over 50 years of making your life more comfortable! This message may contain confidential and/or privileged information. If you are not the addressee or authorized to receive this for the addressee, you must not use, copy, disclose, or take any action based on this message or any information herein. If you have received this message in error, please advise the sender immediately by reply e-mail and delete this message. This OUTBOUND E-mail and Document(s) has been scanned by an Antivirus Server.

1 0

WMI Module Observium
by Jeremy Alberts 23 May '14

23 May '14

Hello, I have the following case. I am useing Observium to monitor a few Windows Server 200 R2 VM's. Some machines can't get there disks polled because of a BDEdrive partition (because of this partition the poll times go up to 60 sec/per machine as wel). As workarround i have disabled the storage poller module (the polling time goes down to 3 sec), and enabled the WMI poller module. The wmi poller module works nice. Polling of the Disk partition works as wel! There is only one problem, the graphs/logs for diskspace dont get written to the rdd files when using the wmi disk poller module. Is this a know problem and if so, is there a fix or setting that I could use? Kind regards, Jeremy

3 6

{Disarmed} Health Processor Usage sorting according to the Usage ?
by Supun Rathnayake 23 May '14

23 May '14

Hi , The current health monitoring top menu report ( http://x.x.x.x/health/metric=processor/ ) displays the items in the alphabetical order of the device name. But it would great if we can get this sorted by actual usage, so that it gives like "Top CPU Usages like report" This is just a suggestion, what do you all think , the same thing could be applied to other metrics as well for the time being I just edited the /opt/observium/html/pages/health/processor.inc.php file and set $processors = array_sort_by($processors, 'processor_usage', SORT_DESC, SORT_NUMBER, 'processor_descr', SORT_ASC, SORT_STRING); to get this effect. but my worry is, this will be overwritten when we do the svn upgrades :-) With Best Regards, Supun Rathnayake Lanka communication Services (Pvt) Ltd. 65C, Dharmapala Mawatha, Colombo 07. Sri Lanka. Tel:+94-11-2437545 <tel:%2B94-11-2437545> http://www.lankacom.net http://blog.lankacom.net

2 2