- observium - lists.observium.org

Deleted status
by Teixeira, Mike 10 Apr '14

10 Apr '14

Hello, When we have ports in deleted status, is there an automagic process to purge those ports? Thanks, Mike

2 5

ifInOctets_perc / ifOutOctets_perc
by Ryan, Spencer J. 10 Apr '14

10 Apr '14

Hi All, Anyone know if these percentages are based on physical speed of the port or of they use the speed set via the "bandwidth" statement? ________________________________ Spencer Ryan | Systems Engineer Miller Canfield<http://www.millercanfield.com> 150 West Jefferson, Suite 2500 Detroit, Michigan 48226 (USA) T +1.313.496.7547 | F +1.313.496.7699 | Mobile +1.734.846.2053 ryan(a)millercanfield.com<mailto:ryan@millercanfield.com> ________________________________ _______________________________________________________________ NOTICE TO PERSONS SUBJECT TO UNITED STATES TAXATION (MCPS) DISCLOSURE UNDER TREASURY CIRCULAR 230: The United States Federal tax advice, if any, contained in this document and its attachments may not be used or referred to in the promoting, marketing or recommending of any entity, investment plan or arrangement, nor is such advice intended or written to be used, and may not be used, by a taxpayer for the purpose of avoiding Federal tax penalties. _______________________________________________________________

3 2

LDAPS Authentication
by Ellery Weber 10 Apr '14

10 Apr '14

Hey guys, I'm trying to get LDAP (through AD) authentication setup on the subscription version of Observium, and am running into some difficulties. My first question - does Observium only do a simple bind, or can it connect using SASL? We do not currently allow simple binds in our domain. Thanks for any assistance you can provide, [SELCO Community Credit Union] Ellery Weber, CCENT Network Administrator SELCO Community Credit Union Eugene - Downtown Corporate Headquarters Phone/Fax: 541-686-5349 | Cell: 541-357-9505 | eweber(a)selco.org<mailto:eweber@selco.org> selco.org<https://www.selco.org/> | facebook<http://www.facebook.com/SELCOCCU> | twitter<http://twitter.com/selcoccu> This message (including any attachments) is intended only for the use of a specific individual or entity or specific individuals or entities and may contain information that is non-public, proprietary, privileged, confidential, and exempt from disclosure under applicable law or may constitute as attorney work product. If you are not the intended recipient, you are hereby notified that any use, dissemination, distribution, or copying of this communication is strictly prohibited and may represent a tortious interference with a confidential business relationship(s). If you have received this communication in error, please notify us immediately by telephone and (i) permanently destroy this message if a facsimile; (ii) permanently delete this message immediately if this is an electronic communication; permanently destroy any electronic or printed copies of this electronic communication.

2 2

rancid multiple config/diff versions within observium
by Chip Pleasants 09 Apr '14

09 Apr '14

I have rancid working today within Observium, although I do not see multiple version ro config/diffs of the configurations like saw some time ago. I did migrate servers therefore its possible a configuration or permissions issue on the new server. On my previous server a couple months ago I was able to look at past diffs within observium. Any assistance is appreciated. Thanks, Chip

1 0

Enhancement Request: Export Inventory to CSV
by techuser6＠gmail.com 09 Apr '14

09 Apr '14

It would be really nice if there was a way to export the Inventory to a CSV. This would greatly help with renewing maintenance and SmartNet Contracts for Cisco Devices.

1 0

Multiple Pollers Guidance
by Chip Pleasants 09 Apr '14

09 Apr '14

When there are multiple pollers via NFS how do they pick the devices to poll? Basically how to they not step all over each other polling the same nodes? I'm seeing snmp and ping alerts like 15 or so every hour come in that didn't come in when it was a single server solution. It does seem to be the same 20 or so devices. These particular devices do typically take around 60 sec to poll. Looking at devices that generated alerts their cpu, snmp response time, and ping time was all over the place. Meaning cpu doubled (10% to 20%), ping times went up to 200ms from 10ms, and snmp response time average when from 50ms to 556ms. I'm wondering if I was polling these devices multiple times within 5 minutes? Would this be related to NFS IO issues? I reverted back to a single solution for now. Any assistance is greatly appreciated. -Chip Config Sniplet $config['alerts']['email']['enable'] = TRUE; $config['poller-wrapper']['alerter'] = TRUE; $config['snmp']['timeout'] = 6; $config['snmp']['retries'] = 3; $config['snmp']['max-rep'] = 10; $config['fping'] = "/usr/sbin/fping -t2000";

3 5

Calculating availability
by Tom Henderson 08 Apr '14

08 Apr '14

Good morning list. Does anyone know if Observium is able to show the total uptime (or downtime) between two points in time? Is this be something the billing module can handle? Cheers Tom Henderson IT Manager | Pack & Company | 027 461 4403 | 09 929 2750 | tom(a)pack.co.nz -- ---------------------------------------------------------------------------If you are not the intended recipient of this email, you must not disclose, copy, or distribute any information contained in or attached to it, or take any action/inaction based on it. Please contact us immediately, and delete this email from your system. Any views or opinions presented in this email are solely those of the author and not of Pack & Company (NZ) Limited (the "Company"), however any intellectual property contained in or attached to this email is the property of the Company. Thank you.

1 0

Ubiquiti AirOS MIB
by Robbie Wright 08 Apr '14

08 Apr '14

UBNT has finally released their officially supported MIB's in their most recent release. I know a few folks are lurking on this list that would love to see those MIB's officially supported and a few of us more than happy to pay for said support in Observium. Todd/Adam/Mike, an interest in taking this on as a sponsored improvement? I can send you the MIB privately if you'd like a sneak peek. Robbie Wright Siuslaw Broadband <http://siuslawbroadband.com> 541-902-5101 **For support issues, please email support(a)siuslawbroadband.com.**

5 9

Remote SysLogging
by Marco Spicuglia 08 Apr '14

08 Apr '14

Hello there, it seems that I have some issues with remote syslogging. Some network devices work well, some others don't. The problem seems to be related to the Observium host, I think, as running syslog-ng -Fevd on my observium server, shows that log entries are coming in also from the devices that do not have any log entry in the GUI. It seems that syslog-ng gets the log entries, but they do not get properly passed to Observium, for some reason, at least for some devices. Therefore, those entries do not show up in the mysql database and thus neither in the GUI. I had this problem also on two other Observium hosts I have tried, but only since an upgrade I performed around October 2013. Before it was working fine for all those devices. Anything I can check/do for fixing this? Thanks in advance for your help. Best regards, Marco Met vriendelijke groet/ Kind regards, Marco Spicuglia Network engineer - Programmer ReasonNet B.V. Gyroscoopweg 134 - 140 1042AZ Amsterdam W. www.reasonnet.com E. Marco.Spicuglia(a)reasonnet.com T. F. ReasonNet zoekt datacenter support engineers. Ga voor deze en andere interessante vacatures binnen ReasonNet naar http://www.reasonnet.com/nieuws ReasonNet, shall not be liable for damages resulting from the use of electronic means of communication, including -but not limited to- damages resulting from failure or delay in delivery of electronic communications, interception or manipulation of electronic communications by third parties or by computer programs used for electronic communications and transmission of viruses and other malicious code.

3 4

Recalculate history usage data
by Jimmy Samuel García Hynds 08 Apr '14

08 Apr '14

Hello, >From time to time I have this huge spikes in the traffic bills that are abnormal, in those cases I just change those values to 0 in the database, I replace them in the bill_data table, and the charts return to normal, I do not mind losing 10 or 20 minutes of readings. This is my question, Is there a way to recalculate the historical data? That data is updated even if I delete the date in the bill_data table, and I do not want to screw up my installation. Best Regards. ________________________________ AVISO DE CONFIDENCIALIDAD: Este e-mail contiene informacion que es confidencial y solo puede ser utilizada por las personas o entidades a la cuales esta dirigida. Si usted no es el destinatario autorizado, cualquier modificacion, retension, difusion o copia total o parcial esta prohibida. CONFIDENTIALITY NOTICE: This email and any files transmitted with it are confidential and intended solely for the use of the individual or entity to whom they are addressed. If you are not the named addressee you should not disseminate, distribute or copy this e-mail.

1 0