- observium - lists.observium.org

Fwd: Juniper MX104 doesn't like load average graph
by David Beveridge 16 Oct '23

16 Oct '23

Last week I upgraded a server to Observium 23.10.13043 (stable) In Polling information I had a huge increase in system polling, (See attached images.) I backed out the upgrade and tried it again a few days later, when I had more time to investigate. In addition the processor graph had changed, showing much higher CPU usage I also noticed a new graph called Load Averages defined here... # svn blame /opt/observium/includes/definitions/mibs/juniper.inc.php 13020 adama // JUNIPER-MIB::jnxOperatingDescr.9.1.0.0 = STRING: Routing Engine 0 13020 adama // JUNIPER-MIB::jnxOperatingDescr.9.2.0.0 = STRING: Routing Engine 1 13020 adama // JUNIPER-MIB::jnxOperatingState.9.1.0.0 = INTEGER: running(2) 13020 adama // JUNIPER-MIB::jnxOperatingState.9.2.0.0 = INTEGER: standby(7) 13020 adama // JUNIPER-MIB::jnxOperating1MinLoadAvg.9.1.0.0 = Gauge32: 123 13020 adama // JUNIPER-MIB::jnxOperating1MinLoadAvg.9.2.0.0 = Gauge32: 8 13020 adama // JUNIPER-MIB::jnxOperating5MinLoadAvg.9.1.0.0 = Gauge32: 56 13020 adama // JUNIPER-MIB::jnxOperating5MinLoadAvg.9.2.0.0 = Gauge32: 5 13020 adama // JUNIPER-MIB::jnxOperating15MinLoadAvg.9.1.0.0 = Gauge32: 27 13020 adama // JUNIPER-MIB::jnxOperating15MinLoadAvg.9.2.0.0 = Gauge32: 0 13020 adama $config['mibs'][$mib]['la'] = [ 13020 adama 'type' => 'table', // In table mode get first entry with test condition 13020 adama 'scale' => 0.01, 13020 adama // Walks 13020 adama 'oid_extra' => 'jnxOperatingState.9', 13020 adama 'oid_1min' => 'jnxOperating1MinLoadAvg.9', 13020 adama 'oid_5min' => 'jnxOperating5MinLoadAvg.9', 13020 adama 'oid_15min' => 'jnxOperating15MinLoadAvg.9', 13020 adama 'test' => [ 'field' => 'jnxOperatingState', 'operator' => 'eq', 'value' => 'running' ], 13020 adama ]; 13020 adama I added unset($config['mibs'][$mib]['la']); // dave did this This has fixed the problem, I don't need the la graph anyway. I had tried to add this to confg.php, but that didn't work. I'm concerned that modifying the juniper.inc.php is not a good idea. Is there a better way to disable this?

2 1

consolidated availability graph
by Erwin Botas 14 Oct '23

14 Oct '23

Hello List, Willing to know if is possible to construct a consolidated device availability for several host “clusters” and have a % not host by host as were are committed to a service SLA Any suggestions welcome. Regards, Something to resume this hosts for example and the leyend able to show the calculation for the group of hosts. [cid:e14e30a7-4c52-4402-a29f-31fc9aabf7da@namprd10.prod.outlook.com] Erwin Botas Administrador de infraestructura senior • +506 2010-5000 • +506 2010-5050 • +506 8982-4885 • San José, CR • www.electrotecnica.com [https://www.electrotecnica.com/signature/bar2018CR.png] NOTA DE CONFIDENCIALIDAD: "La información contenida en este mensaje y sus adjuntos es estrictamente confidencial y se dirige exclusivamente a su destinatario. Si usted no es el destinatario indicado, cualquier divulgación, copia, distribución o uso del contenido de este documento es prohibido y será sancionado de acuerdo con la ley. Si recibió este mensaje por error, debe notificarlo de inmediato al remitente y destruirlo".

1 0

Add sensor data to dashboard
by Ivo van Tulden 14 Oct '23

14 Oct '23

Goodmorning, Please be advised that we just got a license, so if this isn't the correct way to get the information, please advice me how to do better. Is there a possibility to add a graph of a device to the dashboard, so the live information of that sensor data is shown? The link to the graph is something like this: https://<servername>/graphs/to=1697179853/id=313/type=sensor_graph/from=1697093453/<https://%3cservername%3e/graphs/to=1697179853/id=313/type=sensor_graph/from=1697093453/> Met vriendelijke groet, Ivo van Tulden Technical Infrastructure Engineer - IT Department << Security is van ons allemaal >> **** DISCLAIMER: The information sent in or attached to this e-mail is for the addressee only. If this e-mail message is unclear please contact VLISCO by e-mail or telephone. Disclosure or reproduction of this information to a third party without prior agreement of VLISCO is not allowed. VLISCO does not accept any responsibility for the correct and complete interpretation of this e-mail nor for the time of its arrival. VLISCO cannot be held responsible for any claim resulting from negotiations and/or decisions made directly or indirectly based on information contained in this e-mail message. Vlisco Netherlands B.V. Binnen Parallelweg 27, 5701 PH, Helmond, The Netherlands. Chamber of commerce Eindhoven 50751492. Tel.: +31 (0)492 570922 Fax: +31 (0)492 570230 Visit our website: www.vlisco.com ****

3 4

Obtaining good thresholds for monitoring SFP light levels
by Corwin Ziegler Hunts 11 Oct '23

11 Oct '23

We would like to alert if an SFP's received light level is too low. The light level sensor data is present and linked with a specific port so we can adjust the alert checkers based on attributes of the linked port. What we haven't figured out how to do is get appropriate thresholds for alerting for each SFP. The SFPs define warning and alarm thresholds which are readable on the devices containing the SFPs but that data doesn't make it into Observium for most of our monitored devices as far as we can tell. Similar SFPs usually have similar thresholds so grouping by SFP vendor and part number then creating a check for each set of SFPs with manually extracted and entered thresholds could be acceptable. Observium does show the SFP vendor and part number on the device overview and inventory pages along with which port contains the SFP but there doesn't seem to be a way to reference this data when creating port or sensor groups or alert checkers. There are also the automatically generated or manually set thresholds for sensors inside Observium itself. The automatically generated thresholds are often missing and we are not aware of a way to ensure they are present or reasonable. Manually set thresholds could work if there was a way to set and audit those thresholds in an automated fashion. We don't see a way to use the API to do this though (we're using the subscription edition). Are there recommendations on how to achieve this? Is this a solved problem and we're running into a bug? This is feeling more difficult than it should be. Corwin

1 0

device_rebooted metric is now NULL instead of 1
by Corwin Ziegler Hunts 10 Oct '23

10 Oct '23

We have an alert checker using the device_rebooted metric to monitor for reboots. The metric used to read as 1 when a reboot was detected as is documented <https://docs.observium.org/entities/#device>. After updating to the latest stable revision (r13020) from r12520 the metric now reads as NULL immediately after a reboot. Is this change in behavior intended? Corwin

2 1

repeated recovery messages
by andregeissler＠posteo.de 09 Oct '23

09 Oct '23

Hi I get new recovery messages for my pandacom devices (pandacom-sc) all the time. Observium does not show any alerts. For a device that has not reported any event at all since October 5, Observium shows hundreds of recoveries today alone. Any tips on how to debug this would be greatly appreciated. Andre

1 2

physical v/s virtual
by Arnoldo Vidal Bravo 05 Oct '23

05 Oct '23

Hi, we have observium installed and working fine (polling 629 devices). It is currently installed on a physical server. How advisable is it to promote it to a virtual server? -- Saluda cordialmente

3 3

CustomOID Draw Error
by amat＠tvfactory.ch 05 Oct '23

05 Oct '23

Good Morning, We're having trouble with observium and "Custom OID" SNMP retrieval. The Huawei (S6730 V200R019C00SPC500) monitors portspeed and other. However, we are trying to get some Custom OID for hwAvgDuty5min refelecting the Average 5 Min CPU usage. (A) SNMP Walk On the same machine that Observium is installed the snmpwalk returns a value that makes sense administrator@m01:/opt/observium/html/weathermap/configs$ snmpwalk -v2c -c community-hidden 151.252.33.12 1.3.6.1.4.1.2011.6.3.4.1.4 SNMPv2-SMI::enterprises.2011.6.3.4.1.4.0.0.0 = INTEGER: 9 (B) Observium - Configure Custom OID Numeric OID 1.3.6.1.4.1.2011.6.3.4.1.4 we also tried Numeric OID 1.3.6.1.4.1.2011.6.3.4.1.4.0.0.0 Text OID hwAvgDuty5min Value Type GAUGE Description Average CPU Usage Display Unit cpu-usage Display Symbol % Kibibyte (1024) no Log Y Axis no Audo-discovery Yes Unfortunately it does return a "Draw Error". If we do open the CustomOID Graph we see Error: Openeing '': No such file or directory. Any idea what goes wrong here? Kind Regards Ramon Amat

1 0

RouterOS v7 BGPv4 SNMP
by Bergen, Ryan 04 Oct '23

04 Oct '23

Hello, does anyone know if observium can retrieve BGP peering info via SNMP with RouterOS 7.10+? It is now supported on Mikrotiks side, I am able to see the info via snmpwalk with OID 1.3.6.1.2.1.15.3.1 [cid:image003.png@01D9F6A7.A13EF790] [cid:image002.png@01D9F6A7.3CD825B0] Ryan Bergen Network Lead HyLife Ltd 5 Fabas Street, Box 100 La Broquerie, MB R0A 0W0 p 204-424-2300 x472 hylife.com<https://hylife.com/> • Ryan.Bergen(a)Hylife.com<mailto:Ryan.Bergen@Hylife.com> [cid3813500305*image001.png(a)01D93182.760726F0]

2 1

Adjust values returned for custom OID
by Ronald Voermans 04 Oct '23

04 Oct '23

Hi Adam, Did you manage to implement this ‘math parser’ feature for custom oid’s?

1 0