- observium - lists.observium.org

Event log noise
by John Borrow 01 Nov '20

01 Nov '20

Hi all, Our event log is clogging up with multiple current and voltage threshold entries, for example see below; Current gi24 PoE Current above threshold: 0.158 A (> 0.1155 A) Current gi3 PoE Current above threshold: 0.115 A (> 0.102 A) Voltage gi24 PoE Voltage above threshold: 119 V (> 63.25 V) Voltage gi9 PoE Voltage above threshold: 113 V (> 60.95 V) Apologies if this is a dumb question, as I'm knew to the software, but does anyone know a good way of removing these entries besides adjusting the threshold of every network device. Monitoring voltages and currents isn't a high priority for us, so happy to turn these off globally. Many thanks for your help. Regards, John Borrow Systems Administrator T: 02 8438 9432 M: 0419 269267 BENEDICT HEAD OFFICE 11a Narabang Way, Belrose NSW 2085 PO Box 431, Frenchs Forest NSW 1640 T (02) 9986 3500 www.benedict.com.au

1 0

Additional portpercent element/widget on frontpage?
by Gumilar Siegfried MSc. 29 Oct '20

29 Oct '20

Hello! I would love to be able to add a second Traffic Comparison (portpercent) with different port groups to our dashboard. Is that somehow possible? Right now I can add a second "Traffic Composition" Widget in the dashboard edit mode, but it still uses the same port groups as the other one. This is how our current configuration looks like: $config['frontpage']['order'] = array('status_summary', 'map', 'overall_traffic', 'portpercent', 'device_status', 'altert_table', 'syslog', 'eventlog'); $config['frontpage']['portpercent']['Peering'] = array('group' => 5); $config['frontpage']['portpercent']['Transit'] = array('group' => 6); $config['frontpage']['portpercent']['options'] = array('graph_format' => 'single'); In my opinion, it would be best if you could simply use portpercent2, for example, to configure the next widget. Regards, Siegfried

2 5

Deleted wrong device...
by Basile Bluntschli 28 Oct '20

28 Oct '20

Hi All anyone any good ideas to restore a device which was deleted...? The RRDs are still in place. However this device is not currently in production anymore. But it is needed for the statistics older then 10 Months... Any ideas? Kind regards Basile

2 2

graphing total PoE
by Eric W. Bates 27 Oct '20

27 Oct '20

We use a lot of cisco 2960 PoE switches in stacks and we want to know the total demand of the stack. Currently Observium gives us a separate "PoE Group n" for each switch in the stack so those are handy subtotals. But is there a way to create a custom graph with the sum of all the PoE Groups? -- Clark 159a, MS 46 508/289-3112

2 1

top VLANs
by Farshid Abediny 26 Oct '20

26 Oct '20

Hello, we have around 800x VLANs for 6-7x Switches, is there anyway sort VLANs by pps or bps and show top 10 somewhere? thank you.

1 0

Discovery ignore hosts
by Lars Joergensen 26 Oct '20

26 Oct '20

Hi I have this pattern in ignore hosts: [cid:image001.png@01D6A93A.177F62F0] But this one keeps getting discovered every day: [cid:image002.png@01D6A93A.177F62F0] Lars ________________________________ Disclaimer: This e-mail, including any attachments, is for the intended recipient only. If you have received this e-mail by mistake please notify the sender immediately by return e-mail and delete this e-mail and any attachments, without opening the attachments, from your system. Access, disclosure, copying, distribution or reliance on any part of this e-mail by anyone else is prohibited. This e-mail is confidential and may be legally privileged. Chr. Hansen does not represent and/or warrant that the information sent and/or received by or with this e-mail is correct and does not accept any liability for damages related thereto. https://www.chr-hansen.com/en/legal-notice

2 1

Device Graphs are not drawing
by Dulanjaya Oshaka 26 Oct '20

26 Oct '20

Hello I am an absolute beginner to Observium and Linux. I installed Observium in my environment as Syslog and SNMP server. I added some Cisco Catalyst 9500 series, 9200 and Nexus N3k Series switches. After I added those devices, In some devices are not drawing Graphs (like System, Traffic statistics etc). What is the issue for this and How I fix this? I have another question. I need to add more Hard disk space to my ubuntu VM that I installed in Observium. But there is some issue to expand my root disk. I installed Observium also in my Root partition. Because of this I have planned to create an another partition using LVM and move Observium to that partition. Is this possible? If so, How I do that and How can I see the mount point in Observium? Thanks and Regards Dulanjaya Oshaka

1 0

Windows Service, Alerts
by Christos Aivazoglou 26 Oct '20

26 Oct '20

Hello All, * Is there any alert rule to monitor windows service if is running or not ? (WINDOWS) * Is there any way to monitor and also create alert based on power machine state? (ESXI) Thank you very much. Best regards, Christos Aivazoglou VIPA Group <http://www.vipa.ch/> www.vipa.ch This e-mail, and any files and attachments transmitted with it, is confidential. It is intended for the sole use of the named recipients(s) only. If you have received this message in error, please immediately notify us by replying to this message and then permanently delete it. Any views and opinions expressed are those of the individual author/sender and are not necessarily shared or endorsed by VIPA Lausanne S.A. or any associated or related company. This e-mail transmission is not binding for the purposes of forming a contract and does not form a contractual obligation of any type

1 0

Cisco Wifi APs registered twice
by Lars Joergensen 23 Oct '20

23 Oct '20

Hi We had a power mishap which resulted in the Cisco wifi controller rebooting. After that all the AP's got registered twice in observium. Deleting the controller and re-adding it didn't clear up the issue. I manually deleted all entries from the wifi_aps table and got the thing working correct. It's not a big issue, but it should be an easy change to only add unique APs, based on name or MAC, to the database. Lars ________________________________ Disclaimer: This e-mail, including any attachments, is for the intended recipient only. If you have received this e-mail by mistake please notify the sender immediately by return e-mail and delete this e-mail and any attachments, without opening the attachments, from your system. Access, disclosure, copying, distribution or reliance on any part of this e-mail by anyone else is prohibited. This e-mail is confidential and may be legally privileged. Chr. Hansen does not represent and/or warrant that the information sent and/or received by or with this e-mail is correct and does not accept any liability for damages related thereto. https://www.chr-hansen.com/en/legal-notice

1 0

Graphs keep reset randomly and losing previous history
by Gordon Cheng (gocheng) 22 Oct '20

22 Oct '20

Hi Adam and Observium team: We recently started having an issue with our Observium (20.9.10749) that the graphs for different devices would restart and all its previous history would be gone: [Graphical user interface Description automatically generated] And we usually see the following ‘messages’ under /var/log around that time: Oct 18 05:07:13 sjc-observium-1 rrdcached[1495]: queue_thread_main: rrd_update_r (/opt/observium/rrd/atl-wan04/status.rrd) failed with status -1. (/opt/observium/rrd/atl-wan04/status.rrd: illegal attempt to update using time 1603020715 when last update time is 1603021928 (minimum one second step)) Oct 19 05:12:05 sjc-observium-1 rrdcached[14841]: queue_thread_main: rrd_update_r (/opt/observium/rrd/atl-wan04/status.rrd) failed with status -1. (/opt/observium/rrd/atl-wan04/status.rrd: illegal attempt to update using time 1603106221 when last update time is 1603108322 (minimum one second step)) Oct 20 05:32:47 sjc-observium-1 rrdcached[14471]: queue_thread_main: rrd_update_r (/opt/observium/rrd/atl-wan04/status.rrd) failed with status -1. (/opt/observium/rrd/atl-wan04/status.rrd: illegal attempt to update using time 1603194156 when last update time is 1603194737 (minimum one second step)) We have tried restarting the rrdcached process, and deleting the rrdcached files which are not updated for some time (with the command “find * -type f -mtime +5 -delete” under the rrd directory). But they don’t help much. Do you have any suggestions how we can further investigate and troubleshoot this? Thanks. - Gordon

5 7