- observium - lists.observium.org

Re: [Observium] mac-accounting rolls over at ~100Mbit/s
by Adam Armstrong 11 Apr '13

11 Apr '13

Didnt I already fix this? Mattias Gyllenvarg <Mattias.Gyllenvarg(a)Bredband2.se> wrote: >_______________________________________________ >observium mailing list >observium(a)observium.org >http://postman.memetic.org/cgi-bin/mailman/listinfo/observium

2 1

mac-accounting rolls over at ~100Mbit/s
by Mattias Gyllenvarg 11 Apr '13

11 Apr '13

Dear Adam I was looking at the mac-accounting feature and noticed that it never goes over ~114Mbit/s. Seem to remember that the same thing happend in cacti when using 32bit values. Device is Cisco ASR9010 RSP2. PS. Sweet project, much appreciated. -- *Med Vänliga Hälsningar - Best Regards* *Mattias Gyllenvarg* *Nätutveckling* Bredband2 Tel: +46 406219712

2 2

Re: [Observium] Cisco memory pools not being recorded
by Adam Armstrong 10 Apr '13

10 Apr '13

Already fixed, pay attention! :) Matt Hucker <matt(a)nrsolutions.com.au> wrote: >Is it broken for good, or are there plans to fix it in future? > >Matt. > >On 10/04/2013, at 4:19 PM, Nikolay Shopik wrote: > >> its recent changes broke it when new memory pool added for unix host on summary page >> >> On 10.04.2013, at 9:18, Matt Hucker <matt(a)nrsolutions.com.au> wrote: > >_______________________________________________ >observium mailing list >observium(a)observium.org >http://postman.memetic.org/cgi-bin/mailman/listinfo/observium

2 1

Re: [Observium] Mac Address Switch Ports
by Adam Armstrong 10 Apr '13

10 Apr '13

What do you think they should report? Do you know that each port actually has a different Mac? Stefan Milo <stefan(a)zendata.dk> wrote: >they're powerconnects, not force10.... big difference. :) > >i have multiple observium installations with force10 s25n, powerconnect 6224 and lots of different cisco switches. > >on the force10 and powerconnects i see the same as you, with the same mac address on all interfaces. on my cisco devices theres different mac's on the ports. > >so it's either a bug in FTOS and Powerconnect, or it's something deep within observium. > >br > >stefan milo >________________________________________ >Fra: observium-bounces(a)observium.org [observium-bounces(a)observium.org] På vegne af Alex Vitola [alex.vitola(a)gmail.com] >Sendt: 9. april 2013 18:57 >Til: L - Observium >Emne: [Observium] Mac Address Switch Ports > >The same mac address for all port in all devices(dell 6248, force10). It's correct? > > >mysql> use observium; >Database changed >mysql> select device_id,ifDescr,ifPhysAddress from ports where device_id=5 limit 10; >+-----------+------------------------------------------+---------------+ >| device_id | ifDescr | ifPhysAddress | >+-----------+------------------------------------------+---------------+ >| 5 | Unit: 1 Slot: 0 Port: 1 Gigabit - Level | 5c260adb03da | >| 5 | Unit: 1 Slot: 0 Port: 2 Gigabit - Level | 5c260adb03da | >| 5 | Unit: 1 Slot: 0 Port: 3 Gigabit - Level | 5c260adb03da | >| 5 | Unit: 1 Slot: 0 Port: 4 Gigabit - Level | 5c260adb03da | >| 5 | Unit: 1 Slot: 0 Port: 5 Gigabit - Level | 5c260adb03da | >| 5 | Unit: 1 Slot: 0 Port: 6 Gigabit - Level | 5c260adb03da | >| 5 | Unit: 1 Slot: 0 Port: 7 Gigabit - Level | 5c260adb03da | >| 5 | Unit: 1 Slot: 0 Port: 8 Gigabit - Level | 5c260adb03da | >| 5 | Unit: 1 Slot: 0 Port: 9 Gigabit - Level | 5c260adb03da | >| 5 | Unit: 1 Slot: 0 Port: 10 Gigabit - Level | 5c260adb03da | >+-----------+------------------------------------------+---------------+ >10 rows in set (0.00 sec) > >_______________________________________________ >observium mailing list >observium(a)observium.org >http://postman.memetic.org/cgi-bin/mailman/listinfo/observium

5 10

Mac Address Switch Ports
by Alex Vitola 09 Apr '13

09 Apr '13

3 2

Re: [Observium] Mac Address Switch Ports
by Adam Armstrong 09 Apr '13

09 Apr '13

This is common on some switch types. :) Tom Laermans <tom.laermans(a)powersource.cx> wrote: >Hi Alex, > >Looks like my Dell 6248s are reporting the same. All other devices have >different ones, it may be a bug in the dell firmware but not in >Observium :) > >Tom > >On Tue, 2013-04-09 at 13:57 -0300, Alex Vitola wrote: >> The same mac address for all port in all devices(dell 6248, force10). >> It's correct? >> >> >> >> >> mysql> use observium; >> Database changed >> mysql> select device_id,ifDescr,ifPhysAddress from ports where >> device_id=5 limit 10; >> +-----------+------------------------------------------+---------------+ >> | device_id | ifDescr | ifPhysAddress >> | >> +-----------+------------------------------------------+---------------+ >> | 5 | Unit: 1 Slot: 0 Port: 1 Gigabit - Level | 5c260adb03da >> | >> | 5 | Unit: 1 Slot: 0 Port: 2 Gigabit - Level | 5c260adb03da >> | >> | 5 | Unit: 1 Slot: 0 Port: 3 Gigabit - Level | 5c260adb03da >> | >> | 5 | Unit: 1 Slot: 0 Port: 4 Gigabit - Level | 5c260adb03da >> | >> | 5 | Unit: 1 Slot: 0 Port: 5 Gigabit - Level | 5c260adb03da >> | >> | 5 | Unit: 1 Slot: 0 Port: 6 Gigabit - Level | 5c260adb03da >> | >> | 5 | Unit: 1 Slot: 0 Port: 7 Gigabit - Level | 5c260adb03da >> | >> | 5 | Unit: 1 Slot: 0 Port: 8 Gigabit - Level | 5c260adb03da >> | >> | 5 | Unit: 1 Slot: 0 Port: 9 Gigabit - Level | 5c260adb03da >> | >> | 5 | Unit: 1 Slot: 0 Port: 10 Gigabit - Level | 5c260adb03da >> | >> +-----------+------------------------------------------+---------------+ >> 10 rows in set (0.00 sec) >> >> >> _______________________________________________ >> observium mailing list >> observium(a)observium.org >> http://postman.memetic.org/cgi-bin/mailman/listinfo/observium > > >_______________________________________________ >observium mailing list >observium(a)observium.org >http://postman.memetic.org/cgi-bin/mailman/listinfo/observium

1 0

Re: [Observium] bug at html/includes/graphs/generic_multi_line.inc.php
by Adam Armstrong 08 Apr '13

08 Apr '13

When I remember... :D Ciro Iriarte <cyruspy(a)gmail.com> wrote: >_______________________________________________ >observium mailing list >observium(a)observium.org >http://postman.memetic.org/cgi-bin/mailman/listinfo/observium

1 0

bug at html/includes/graphs/generic_multi_line.inc.php
by andres fariña 08 Apr '13

08 Apr '13

Hi all, I´ve found a bug at html/includes/graphs/generic_multi_line.inc.php with wrong order of data shown as Avg, Min, Max at graph. Here is the fix --- /opt/observium-wks/html/includes/graphs/generic_multi_line.inc.php 2013-03-12 15:44:22.000000000 -0300 +++ html/includes/graphs/generic_multi_line.inc.php 2013-04-03 18:03:27.000000000 -0400 @@ -71,9 +71,9 @@ foreach ($rrd_list as $i => $rrd) } if(in_array("lst", $data_show)) { $rrd_optionsb .= " GPRINT:".$id.":LAST:%6.1lf%s"; } + if(in_array("avg", $data_show)) { $rrd_optionsb .= " GPRINT:".$id.":AVERAGE:%6.1lf%s"; } if(in_array("min", $data_show)) { $rrd_optionsb .= " GPRINT:".$id."min:MIN:%6.1lf%s"; } if(in_array("max", $data_show)) { $rrd_optionsb .= " GPRINT:".$id."max:MAX:%6.1lf%s"; } - if(in_array("avg", $data_show)) { $rrd_optionsb .= " GPRINT:".$id.":AVERAGE:%6.1lf%s"; } $rrd_optionsb .= " COMMENT:'\\l'"; $iter++; And the result: Before After Could someone help commiting this? Regards, Edgar

1 0

Pagination issue
by Michael Robbert 08 Apr '13

08 Apr '13

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 I just noticed in our instance of Observium if we load the "Ports -> All ports" page it has a pagination selector at the top, but it appears to be showing all ports on one page rather than the 100 that appears to be the default. This was producing 500 errors until I increased the PHP memory to 1024M. Now it is grinding the browser to a crawl. Should this or could this page load only the first 100 entries by default? We have a similar problem with the inventory page, but it doesn't appear to have pagination enabled. I'd like to request that has an enhancement unless it is supposed to already be there and my instance is just messed up. Thanks, Mike Robbert -----BEGIN PGP SIGNATURE----- Version: GnuPG/MacGPG2 v2.0.19 (Darwin) Comment: GPGTools - http://gpgtools.org iQEcBAEBAgAGBQJRXwjlAAoJEFmgPOBxQDtBGcIH+gMhDl6bNdpGytWFwv6jdgYW ZCACXyi3ikvSyY+JM/FtvO94SVeP1htUWdl9bUqQfI8tdKJL9AgkK9KGHmF08KZe Elb4W8TrSxWaodtG0gDO+rFFf+lPRYWsli4AT+rmEhoJ3mpxRDVBEiA/Z/5+h1qd fVPo3Q+yRHBC9HOE3OLC3wcbsIJywxGyS8uEFPW4nPC/Cbt/em1fEVppMi6wsGZZ Sl2S+CZr2Tgf9+L/LmOaAsRDqrvfyqsFiTu22JMj9KRffPNF+y+32C3R27+xTlua hGkJ7I7ArEw1a5GgUwQWC68jqaKcTQXJAtO5EhY8qaL/MCtDQgrrww1SCHefqTs= =oI/I -----END PGP SIGNATURE-----

2 2

Re: [Observium] Graphs don't show
by Adam Armstrong 08 Apr '13

08 Apr '13

Screenshots? Bart Teunis <bteunis(a)a2b-internet.com> wrote: >_______________________________________________ >observium mailing list >observium(a)observium.org >http://postman.memetic.org/cgi-bin/mailman/listinfo/observium

1 0