- observium - lists.observium.org

ServerCheck Expansion Module Problem
by Brian Weeks 12 Feb '18

12 Feb '18

Hello, I am having a problem with my ServerCheck Gateway when I use their expansion module. The problem is when I have a sensor (I am using temperature) plugged into the expansion it does not get discovered. I did some digging with my very limited knowledge of PHP and it looks like the serverscheck.inc.php file only references the sensor that you would plug into the gateway .1.3.6.1.4.1.17095.3. But, when you plug a sensor into the expansion module it polls at .1.3.6.1.4.1.17095.11.0. Now I can edit the php and add these value locations to the array at the top and now the values for the sensor plugged into the expansion module appear. But, their descriptions do not show. I have tried everything I know but my very limited knowledge of PHP is hurting me. To make this even more difficult the value it uses to poll the description is sensor1name for the sensors that plug into a gateway. But, for the expansion, the description value is sensor1Name with a capital "N". Please, can someone help me we are using Observium to monitor the temperatures in Walk-in Freezers and Refrigerators and they are really pressing me to get this completed? -- Brian Weeks Network Engineer CCNA, MCSE, ACMT, A+, Network + Brenham ISD 1301 Niebuhr St. Brenham, TX 7783 Office: (979) 277-3760 ext. 2249 Email: bweeks(a)brenhamk-12.net Website: http://www.brenhamisd.net

3 3

Notifications Question
by Hermes J. Martinez 11 Feb '18

11 Feb '18

Hi I Have a Question, I was looking in the documentation for something that can help me, but maybe I don't search with the correct words, there is a way to make something similar to that I Put in the image attach? If One Switch goes down.. The other switches behind it, don't send alerts? Hermes J. Martinez Asistente De Sistemas <mailto:hermes.martinez@pueblobonito.com.mx> hermes.martinez(a)pueblobonito.com.mx (669) 989-8900 | EXT 8656 <http://www.pueblobonito.com/> www.pueblobonito.com.mx <http://www.pueblobonito.com/real-escape> Read about the Real Escape at Pueblo Bonito Connect with us <https://twitter.com/PuebloBonito> <https://plus.google.com/103008660176547960870/about> <https://www.facebook.com/PuebloBonitoResort> <https://www.instagram.com/pueblobonito/> <http://www.pueblobonito.com/blog/> Do you really need to print this e-mail? En realidad necesita imprimir este correo? Aviso Legal / Legal Notice http://img.pueblobonito.com.mx/legal

4 10

Port/CDP map is missing
by Pico Leto 09 Feb '18

09 Feb '18

Hi, I seem to missing my cdp port mapping when i go to Devices => Host => Port => Map. I remember it working a few releases ago. Running 18.1.9004

1 0

OpsGenie Observium Integration
by Çağla Arıkan 09 Feb '18

09 Feb '18

Hi, I work as a software engineer at OpsGenie. Observium has a native integration with OpsGenie, and we have a request for you about configuration of this integration. We are introducing EU OpsGenie. When the customers start using EU OpsGenie, they will not be able to use the integration. When an OpsGenie integration is being configured, Observium sends an HTTP request to https://api.opsgenie.com/v1/json/observiumv2?apiKey=$apikey <https://api.opsgenie.com/v1/json/observiumv2?apiKey=$apikey>, but our OpsGenie EU instance will use another endpoint which is https://api.euopsgenie.com/v1/json/observiumv2?apiKey=$apikey <https://api.euopsgenie.com/v1/json/observiumv2?apiKey=$apikey>observiumv2 <https://api.opsgenie.com/v1/json/monitis?apiKey=$apikey>?apiKey=$apikey. And we're thinking of adding more instances like this. Thus, can you change the OpsGenie integration configuration in a way to let the endpoints to be configurable by users? Best Regards, Çağla from OpsGenie

1 0

Graphic failed
by Marcos Tp 09 Feb '18

09 Feb '18

Hi, My graphics are showing up with this crash in a few moments. Is it some configuration error? I'm monitoring Juniper and Mikrotik equipment

4 7

XMPP Alerts
by Berlo, Clay 08 Feb '18

08 Feb '18

Hi folks, Where might I find documentation for the XMPP Notification Transport? It looks a lot like a stub on the documentation site. Thanks, Clay Berlo Network Systems Administrator DISTRICT SCHOOL BOARD OF NIAGARA 191 Carlton St. St. Catharines, Ontario L2R 7P4 www.dsbn.org<http://www.dsbn.org/> 905-641-1550 x.54013 Achieving Success Together! [I Matter logo]

2 1

SNMP Traps
by O'Connor, Gerry 08 Feb '18

08 Feb '18

Hi, Does Observium provide a mechanism for receiving SNMP Traps from devices for error conditions and then translating those Traps into email notifications? We have a number of power monitors in our environment that do not support snmpget or snmpwalk so Observium cannot poll them for data. The power monitors do support sending Traps when the Power (Amps) being consumed crosses above or below a certain threshold. I looked over docs.observium.org and the FAQ and didn't see anything regarding this. Thanks Gerry

2 1

Observium - Unable to generate email notifications from Syslog Alerts
by Shaun Stokes 07 Feb '18

07 Feb '18

Hi All, Observium Professional 17.11.8960 (29th November 2017) OS: Linux 3.16.0-4-amd64 [amd64] (Debian 8.7) Apache: 2.4.10 (Debian) PHP: 5.6.30-0+deb8u1 (OPcache: ENABLED) Python: 2.7.9 MySQL: 5.5.54-0+deb8u1 (extension: mysqli 5.5.54) SNMP: NET-SNMP 5.7.2.1 RRDtool: 1.4.8 (rrdcached 1.4.8: unix:/var/run/rrdcached.sock) We are unable to generate email notifications from Syslog Alerts. We are able to generate email notifications from Alert Checkers for the same contacts, and we are able to generate Syslog Alerts on Observium from the Syslog Rules but the associated Contacts do not receive email notifications for those Syslog Alerts. Essentially everything works except for the last step 'Generating Notifications' following the documentation: http://docs.observium.org/alerting_syslog/ We've run a Rebuild via the Web UI, have re-created the Syslog Rules and Contacts and have been through the global configuration but can't find anything obvious. Has anyone come across this problem before, or have any ideas on what would be the next step? Thanks, Shaun? ? ______________________________________________________________________ This message has been checked for all known viruses by MessageLabs Virus Scanning Service. ______________________________________________________________________

4 7

CustomOIDs to groups or alerts
by Richard Wigzell 07 Feb '18

07 Feb '18

Hello, anyone know how to add CustomOIDs to groups or alerts? [cid:image001.png@01D38DAF.6F342D40] Regards [cid:image001.jpg@01CE9215.D39244B0]<https://www.it.ox.ac.uk/> Richard Wigzell Technical Lead, Storage Platforms IT Services | University of Oxford 13 Banbury Road, Oxford OX2 6NN T: 01865 616282 www.it.ox.ac.uk<https://www.it.ox.ac.uk/>

2 1

Re: [Observium] changelog of 9011 (stable)
by Mike Stupalov 06 Feb '18

06 Feb '18

Hi, Unformatted, svn log is always here: http://www.observium.org/svn.log Formatted will written later, available here: http://docs.observium.org/changelog/ > Edvinas K <mailto:edvinas.email@gmail.com> > 5 February 2018 at 11:34 > Hello, > > Where it'd be possible to see what changes was implemented in version: 9011 ? > > Thanks > _______________________________________________ > observium mailing list > observium(a)observium.org > http://postman.memetic.org/cgi-bin/mailman/listinfo/observium -- Mike Stupalov Observium Limited, http://observium.org

3 2