- observium - lists.observium.org

unsubscribe
by David Ford [NTLWORLD] 21 Nov '14

21 Nov '14

-- Regards, David Ford Your Old Books & Maps [1] -- Regards, David Ford Your Old Books & Maps [2] Links: ------ [1] http://youroldbooksandmaps.co.uk/?utm_source=TurboSMTP&utm_medium=TurboSMTP… [2] http://youroldbooksandmaps.co.uk/?utm_source=TurboSMTP&utm_medium=TurboSMTP…

2 1

Re: [Observium] hddtemp on CE 0.14.4.5
by deeepdish 21 Nov '14

21 Nov '14

My apologies…. Not using hddtemp script. Using the temperature script (that uses hddtemp).. sn = serial number. Using ZFS on Linux by-vdev definition to map /dev/hd? -> /dev/disk/by-vdev/(sn - serial number) My temperature script below as on monitored host. #!/bin/bash echo "<<<temperature>>>" echo “(sn 1):" `hddtemp /dev/disk/by-vdev/(sn 1) -n` echo “(sn 2):" `hddtemp /dev/disk/by-vdev/(sn 2) -n` echo “(sn 3):" `hddtemp /dev/disk/by-vdev/(sn 3) -n` echo “(sn 4):" `hddtemp /dev/disk/by-vdev/(sn 4) -n` echo “(sn 5):" `hddtemp /dev/disk/by-vdev/(sn 5) -n` ------------------------------ Message: 5 Date: Fri, 21 Nov 2014 10:27:27 -0600 From: "Ron Marosko" <ron(a)rjr-services.com <mailto:ron@rjr-services.com>> To: "'Observium Network Observation System'" <observium(a)observium.org <mailto:observium@observium.org>> Subject: Re: [Observium] hddtemp on CE 0.14.4.5 Message-ID: <001b01d005a8$0aa08140$1fe183c0$(a)rjr-services.com <mailto:001b01d005a8$0aa08140$1fe183c0$@rjr-services.com>> Content-Type: text/plain; charset="us-ascii" Just having a look at the hddtemp agent script. # hddtemp sensor readings # needs hddtemp daemon listening on (at least) localhost # requires netcat to be installed and in the path Have you satisfied those requirements? From: observium [mailto:observium-bounces@observium.org <mailto:observium-bounces@observium.org>] On Behalf Of deeepdish Sent: Friday, November 21, 2014 9:36 AM To: observium(a)observium.org <mailto:observium@observium.org> Subject: [Observium] hddtemp on CE 0.14.4.5 Hello. Great product. Looking forward to evaluating the subscription version after I get a minimum base operational using the CE edition. I have an issue around viewing HDD TEMP graphs driven by data extracted from the UNIX agent and hddtemp script. I can confirm output when auditing output of: telnet (hostname) 36602 or ./poller.php -h (hostname) -d I can also confirm temp. sensor driven graphs do come up for other hosts when using SNMP lmsensors, however not for unix-agent / hddtemp data sources. Can someone point me in the right direction? Thank you.

1 0

hddtemp on CE 0.14.4.5
by deeepdish 21 Nov '14

21 Nov '14

Hello. Great product. Looking forward to evaluating the subscription version after I get a minimum base operational using the CE edition. I have an issue around viewing HDD TEMP graphs driven by data extracted from the UNIX agent and hddtemp script. I can confirm output when auditing output of: telnet (hostname) 36602 or ./poller.php -h (hostname) -d I can also confirm temp. sensor driven graphs do come up for other hosts when using SNMP lmsensors, however not for unix-agent / hddtemp data sources. Can someone point me in the right direction? Thank you.

1 0

r6001 backward compatibility
by Tom Laermans 21 Nov '14

21 Nov '14

Dear all, Revision 6001 cleans up a bunch of old code paths that should not have been used in recent days. If you are upgrading from a revision before r5000, it's probably best to upgrade to r6000 (svn up -r6000) first, run a full discovery and poll cycle, then upgrade to latest trunk. We've removed RRD renaming code for files which should since long have been renamed, and variables that should not exist anymore in your config. Variables to double check: $config['email_*'] should be renamed to $config['email'][*] instead. Tom

3 4

Groups
by Milton Ngan 20 Nov '14

20 Nov '14

What is the intention of the groups feature? It seems like a really powerful way to group stuff together and have interesting views of things. But right now it just generates a list of entities that you can click through or hover over. I took a look at the code that generates all the various graph layouts (iftypes, health, ports). It seems that every page has its own code for handling the graph layout. It seem like this would be a great place to leverage a bunch of the existing code so you can create group specific views of sensors, ports etc... But it doesn't look like the code is structured that way (i.e reusable components/widgets). The standard views are good, but I want to be able to see them on a per datacenter/region basis rather than globally. The global view is visually interesting/pretty it is less useful.

6 9

Re: [Observium] Avoid Ignored Ports
by Pedersen, Sean 20 Nov '14

20 Nov '14

Where are you disabling / ignoring the ports? Screenshot(s) would be helpful here. You can set each port to poll or alert (Yes/No) under the settings of the device the port is on. I¹m not sure if the Alert toggle is tied to the new alerts or a remnant of the old alerting system. On 11/19/14, 10:14 AM, "Josh Hopper" <joshhopper(a)protectplus.com> wrote: >Some ports in Observium I set to ignore because I don't need to watch >them right now but I will eventually. >Even though they are ignored, I'm still alerted by them. How do I filter >out ignored ports? > >-- >Sincerely, >Joshua Hopper, A+ CE >Network Administrator > > 420 3rd Ave NW Hickory NC 28601 >Office: 828-449-1839x2160 | Cell: 828-855-7565 > >_______________________________________________ >observium mailing list >observium(a)observium.org >http://postman.memetic.org/cgi-bin/mailman/listinfo/observium Founded in 2007, IO is a worldwide leader in software defined data center technology, services and solutions that enable businesses and governments to intelligently control their information. The communication contained in this e-mail is confidential and is intended only for the named recipient(s) and may contain information that is privileged, proprietary, attorney work product or exempt from disclosure under applicable law. If you have received this message in error, or are not the named recipient(s), please note that any form of distribution, copying or use of this communication or the information in it is strictly prohibited and may be unlawful. Please immediately notify the sender of the error, and delete this communication including any attached files from your system. Thank you for your cooperation.

4 3

New Community edition?
by John P Arends 20 Nov '14

20 Nov '14

Is a new version of the community edition coming out soon? Based on the schedule of the past two releases it looks like it may be soon.

4 3

Re: [Observium] Old map on frontpage?
by Jonathan Green 20 Nov '14

20 Nov '14

Hello All: Just upgraded to v14. Curious if there is a way to use the old map on the frontpage, the map from v13? Thank you. -Jonathan

4 5

RAID Alert Check
by Lane Eckley 20 Nov '14

20 Nov '14

Hi Guys, I am looking to setup an alert check for LSI & Adaptec RAID arrays, however looking over the docs and I uncertain on how to properly configure it. Here is what I think I know: -Use the Observium agent to query the RAID controller and drive status -Create an alert check under “sensor” What I don’t know -The rest of the variables for the alert check Thanks guys! -Lane

3 8

Re: [Observium] Amperage Calc
by Pedersen, Sean 19 Nov '14

19 Nov '14

Alerts can¹t be added up. They¹re attributed to whatever entity/device/metric combination you create, triggering on the individual values that match your rules. You could create rules to match both of your individual PDUs, or all PDUs, but you can¹t ask it to add/subtract the values of multiple rules or metrics to trigger an alert. Curious - what kind of scenario are you looking at that would warrant this kind of alarm? On 11/19/14, 10:37 AM, "Josh Hopper" <joshhopper(a)protectplus.com> wrote: >Is there a way to add PDU Amerage together so you get an alert based on >the Amperage Usage of 2 PDUs together? > >For Example: >PDU A - 10 Amps >PDU B - 1 Amps > >If PDU A + PDU B = 12 Amps then Send Alert > >Something like that. > >-- >Sincerely, >Joshua Hopper, A+ CE >Network Administrator > > 420 3rd Ave NW Hickory NC 28601 >Office: 828-449-1839x2160 | Cell: 828-855-7565 >_______________________________________________ >observium mailing list >observium(a)observium.org >http://postman.memetic.org/cgi-bin/mailman/listinfo/observium Founded in 2007, IO is a worldwide leader in software defined data center technology, services and solutions that enable businesses and governments to intelligently control their information. The communication contained in this e-mail is confidential and is intended only for the named recipient(s) and may contain information that is privileged, proprietary, attorney work product or exempt from disclosure under applicable law. If you have received this message in error, or are not the named recipient(s), please note that any form of distribution, copying or use of this communication or the information in it is strictly prohibited and may be unlawful. Please immediately notify the sender of the error, and delete this communication including any attached files from your system. Thank you for your cooperation.

3 2