- observium - lists.observium.org

Discovery updates sensors on every run
by Niklas Larsson 07 Jan '19

07 Jan '19

Hi, replaced a Dell EqualLogic member and since then I get logs of sensor updates every time discovery is running. I can not see any changes though, snipped from attached output: > > Discover sensor: [class: temperature, device: eql.example.com, oid: > .1.3.6.1.4.1.12740.2.1.6.1.3.1.1071562282.2, index: 1.1071562282.2, > type: equallogic, descr: Backplane sensor 0, scale: 1, limits: (1, 2, > 45, 50), CURRENT: 24, , > > SQL[SELECT COUNT(`sensor_id`) FROM `sensors` > WHERE `poller_type`= 'snmp' AND `sensor_class` = > 'temperature' AND `device_id` = '38' AND `sensor_type` = 'equallogic' > AND `sensor_index` = '1.1071562282.2'] > ROWS[1] > SQL RUNTIME[0.00074983s] > > SQL[SELECT * FROM `sensors` WHERE `sensor_class` = 'temperature' AND > `device_id` = '38' AND `sensor_type` = 'equallogic' AND `sensor_index` > = '1.1071562282.2'] > ROWS[1] > SQL RUNTIME[0.00094700s] > Compare float numbers: "50" with "50", epsilon: "0.1", comparision: "0 > < 0.1", numbers: SAME > Compare float numbers: "45" with "45", epsilon: "0.1", comparision: "0 > < 0.1", numbers: SAME > Compare float numbers: "1" with "1", epsilon: "0.1", comparision: "0 < > 0.1", numbers: SAME > Compare float numbers: "2" with "2", epsilon: "0.1", comparision: "0 < > 0.1", numbers: SAME > Compare float numbers: "1" with "1", epsilon: "1.0E-5", comparision: > "0 < 1.0E-5", numbers: SAME > Compare float numbers: "0" with "0", epsilon: "1.0E-5", comparision: > "0 < 1.0E-5", numbers: SAME > > SQL[SELECT `attrib_value` FROM `entity_attribs` WHERE `entity_type` = > 'sensor' AND `entity_id` = '5230' AND `attrib_type` = 'sensor_addition'] > ROWS[0] > SQL RUNTIME[0.00034690s] > > SQL[UPDATE `sensors` set `sensor_mib` ='',`sensor_object` ='' WHERE > `sensor_id` = '5230'] > ROWS[0] > SQL RUNTIME[0.00050497s] > U > SQL[INSERT INTO `eventlog` > (`device_id`,`entity_id`,`entity_type`,`timestamp`,`severity`,`message`) > VALUES ('38','5230','sensor',NOW(),'6','Sensor updated: temperature > equallogic 1.1071562282.2 Backplane sensor 0')] > ROWS[1] > SQL RUNTIME[0.00040412s] What can I do? /niklas

3 5

Coriant G30 Monitoring
by Jay Hanke 06 Jan '19

06 Jan '19

Is anyone monitoring Coriant G30 devices in Observium?

2 3

19.1.9654 Front page map
by Luca Sasdelli 04 Jan '19

04 Jan '19

Hi all, does it exist any way to set a map area to be shown? Here I see a twice planisphere, while our targeted devices just cover the Europe only. Thanks and greets. Luca

1 0

BFD Support
by Klimek, Denis 03 Jan '19

03 Jan '19

Hi all, do you have anything on your roadmap regarding BFD support? CISCO-IETF-BFD-MIB, JUNIPER-BFD-MIB, BFD-STD-MIB etc pp Mit freundlichem Gruß Stadtwerke Norderstedt Denis Klimek Professional Network Engineer IP-Systemtechnik Tel: 040 / 521 04 - 1049 Mobil: 0151 / 652 219 06 dklimek(a)stadtwerke-norderstedt.de<mailto:dklimek@stadtwerke-norderstedt.de> www.stadtwerke-norderstedt.de<http://www.stadtwerke-norderstedt.de/>

1 0

Help
by thesa1nt＠mail.bg 03 Jan '19

03 Jan '19

Hi, I have Observium CE in my system and so far worked well. Now I added a two printers - Brother MFC-L8690CDW and Brother MFC-L9570CDW. But in "Printer Supplies" observium showed "Unknown" for Toner Cartbridge. After update to the newest version now show "Some Space" ( 1% ) and it isn't correct. Can you help me, please ? ------------------------------------- П.П. Искаш бизнесът ти да е и онлайн? Лесно е! Направи си сайт. В СуперХостинг.БГ пазят място за него! Виж повече на www.superhosting.bg. https://www.superhosting.bg/?utm_source=mail.bg&utm_medium=cpm&utm_content=…

2 1

Best procedure to delete device without losing graphs
by Klimek, Denis 03 Jan '19

03 Jan '19

Hi, is there any best procedure known to keep graphs data for a "Aggregated Graph" build with filters? (Port groups) Example: We have a Port Group called "Transit" which includes all ports labeled as Transit upstreams. Now we replaced the whole router which had a transit upstream. The new router does have it aswell. Now we want to keep the existing data for the Port Group Graph for historical reason, but we also want to delete the device in the database to keep Observium database clean. Currently we also have duplicate IP addresses for the configured IP addresses... on the old device and on the new one. I think if we delete the device we will lose the port label information which is important to build the port groups with the filters. Can someone advise something? Mit freundlichem Gruß Stadtwerke Norderstedt Denis Klimek Professional Network Engineer IP-Systemtechnik Tel: 040 / 521 04 - 1049 Mobil: 0151 / 652 219 06 dklimek(a)stadtwerke-norderstedt.de<mailto:dklimek@stadtwerke-norderstedt.de> www.stadtwerke-norderstedt.de<http://www.stadtwerke-norderstedt.de/>

3 3

Buildings in Front Page Map
by Philippe Laurent 02 Jan '19

02 Jan '19

What is the recommended method of showing buildings (provided by OpenStreetMap) in the front page map of the Observium interface?

2 5

Starline Busway Monitoring
by David Ross 02 Jan '19

02 Jan '19

Hello! I sent this question yesterday but got no response. Please reply as soon as possible. I've added monitoring to our Starline Busway CPMs (Critical Power Meters) and have added latest MIB to the Observium SNMP MIBs directory. However, I get very little to no monitoring data. Is the Starline MIB not supported by Observium? Please advise; thanks! Regards, *David W. Ross, Sr.* Sr. Lab Ops Engineer 50 Fremont St, 42nd Floor San Francisco, California 94105 415.589.4930 - O 415.926.3483 - C david.ross(a)salesforce.com <http://smart.salesforce.com/sig/david.ross//us_mb/default/link.html>

3 5

UBNT Gpon port Ufiber
by chott＠praha1.net 02 Jan '19

02 Jan '19

Hello team, There is new MIB for support UFiber OLT GPon ports, MIB from UBNT side https://drive.google.com/file/d/1F1BYUiLZF_ciGsZIgyMrsGkJTI_royg_/view Can you check version and update in Observium? Now UFiber show only "lo" "eth0" and "br0" Thank you Tom

1 1

help on Active directory authentication (nothing happens)
by Vincent Kwiatkowski 02 Jan '19

02 Jan '19

Hi All, I tried to make observium AD log in working during a few hours without any success, so I ask here for help^^ I took the ad example conf and edited some values. I used same kind of conf in antoher apache vhost, and it works fine. I also tried to find a good debug mode to help me with that, but nothing Is in the logs. I tried "url/debug", "url/debug=yes", I can only see "CACHE DISABLED. Disabled in config", but I don't see any message about failed authentication (after I entered my credentials, nothing happens, I come back to log in page) I also tried what is in this page ( https://docs.observium.org/config_options/#debugging-profiling-settings), but nothing happens in any log file. how can I enabled debug mode to help me with this authentication issue? In my win2k8 AD, the directory tree is as follow: Administrative (at the root) --> "Domain users" (where all the "human" users are) --> "Groups" (where all the groups are) --> "ServiceAccounts" (where the binddn user is) Here is the conf I have : $config['auth_mechanism'] = "ldap"; $config['auth_ldap_binddn'] = "cn=DNrequest,ou=ServiceAccounts,ou=Administrative,dc=example,dc=com"; $config['auth_ldap_bindpw'] = "password"; $config['auth_ldap_attr']['uid'] = "sAMAccountName"; $config['auth_ldap_attr']['uidNumber'] = "objectSid"; $config['auth_ldap_attr']['cn'] = "name"; $config['auth_ldap_attr']['dn'] = "distinguishedname"; $config['auth_ldap_objectclass'] = "person"; $config['auth_ldap_version'] = 3; $config['auth_ldap_server'] = "example.com"; $config['auth_ldap_port'] = 389; $config['auth_ldap_starttls'] = FALSE; $config['auth_ldap_prefix'] = "CN="; $config['auth_ldap_suffix'] = ",OU=Domain users,OU=Administrative,DC=example,DC=com"; $config['auth_ldap_group'] = array("CN=NE.Access,OU=Groups,OU=Administrative,DC=example,DC=com"); $config['auth_ldap_groupbase'] = "OU=Groups,OU=Administrative,DC=example,DC=com"; $config['auth_ldap_groupmembertype'] = "fulldn"; $config['auth_ldap_groupmemberattr'] = "member"; unset($config['auth_ldap_groups']); $config['auth_ldap_groups']['CN=NE.Access,OU=Groups,OU=Administrative,DC=example,DC=com']['level'] = 10; Thanks a lot in advance for you help! Vincent Kwiatkowski Operations&Infrastructure - System Team • Itiviti Production System Engineer Direct: +33 1 44 50 25 45 vincent.kwiatkowski(a)itiviti.com 21 Boulevard Haussmann <https://maps.google.com/?q=21+Boulevard+Haussmann+75009+Paris,+France&entry…> 75009 Paris, France <https://maps.google.com/?q=21+Boulevard+Haussmann+75009+Paris,+France&entry…> Phone: +33 1 49 95 30 00 -- Visit: itiviti.com <https://www.itiviti.com/> / ullink.com <https://www.ullink.com/> » Read the latest news from Itiviti » <http://www.itiviti.com/news/> *The information contained in or attached to this email is strictly confidential. If you are not the intended recipient, please notify us immediately by telephone and return the message to us.* * * *Email communications by definition contain personal information. The ITIVITI group of companies (of which ULLINK forms part) is subject to European data protection regulations. ULLINK’s Privacy Policy is available at www.ullink.com <http://www.ullink.com/>. ULLINK expects the recipient of this email to be compliant with ULLINK’s Privacy Policy and applicable regulations. Please advise us immediately at dataprotection(a)ullink.com <mailto:dataprotection@ullink.com> if you are not compliant with these.*

3 3