- observium - lists.observium.org

Alerts based on RRD averages?
by Stephen Fulton 25 Feb '16

25 Feb '16

Hi all, I'm curious if it is possible to create an alert that considers an RRD average? For example, if I want to generate an alert that looks at the average utilization of a port over a 24 hour period, and if the average bit rate or percentage is greater than X, send an alert? I have been working with alerts that trigger based on a percentage, but if the port drops below that mark for even a short period of time (minutes, perhaps even an hour or two), the clock resets. That's proving troublesome. Any suggestions? Thanks, -- Stephen

2 1

HP mfp m527 and mfp m577 printers
by Richard Kuhns 25 Feb '16

25 Feb '16

Greetings, We've just purchased both of these printers. I've started monitoring them with Observium, but all I see under Inventory are the printer itself (hrDevicePrinter) and the printer's hard disk (hrDeviceDiskStorage). Have I missed doing something, or are these printers just not supported? This is by no means urgent. I've never tried to monitor a printer before and I just wanted to see what Observium told me about them. Thanks, - Richard -- Richard Kuhns <rjk(a)wintek.com> Wintek Corporation 427 N 6th Street Lafayette, IN 47901-2211 Main: 765-742-8428 Direct: 765-269-8541

3 3

non-continuous graphs
by Sathish.I 25 Feb '16

25 Feb '16

Hello All, WE have newly installed Observium, we are seeing the graph's in non-continuous pattern as below. Can you guys please check and suggest a solution. Regards, sathish

1 0

Getting "DB schema not installed, first install it." After CE upgrade
by KA PDE 25 Feb '16

25 Feb '16

Hi everyone, Today I've upgraded a CE Observium from 0.15.6 to 0.16.1 and it broke. It only shows DB schema not installed. I've noticed some errors in update-errors.log [2016/02/25 07:37:08 +0000] discovery.php(29504): Error: (1046) No database selected [2016/02/25 07:37:08 +0000] discovery.php(29504): Query: ALTER TABLE `bgpPeers` ADD INDEX `bgp_cache` (`bgpPeer_id`, `device_id`, `bgpPeerState`, `bgpPeerAdminStatus`, `bgpPeerRemoteAs`); [2016/02/25 07:37:08 +0000] discovery.php(29504): Error: (1046) No database selected [2016/02/25 07:37:08 +0000] discovery.php(29504): Query: ALTER TABLE `ospf_instances` ADD INDEX `ospf_cache` (`device_id`, `ospf_instance_id`, `ospfAdminStat`); [2016/02/25 07:37:08 +0000] discovery.php(29504): Error: (1046) No database selected [2016/02/25 07:37:08 +0000] discovery.php(29504): Query: ALTER TABLE `vrfs` ADD INDEX `vrf_cache` (`vrf_id`, `device_id`, `mplsVpnVrfRouteDistinguisher`); [2016/02/25 07:37:08 +0000] discovery.php(29504): Error: (1046) No database selected [2016/02/25 07:37:08 +0000] discovery.php(29504): ====== Schema update 264 -> 265 ============== [2016/02/25 07:37:08 +0000] discovery.php(29504): Query: ALTER TABLE `alerts_maint` ADD INDEX `maint_cache` (`maint_start`, `maint_end`); [2016/02/25 07:37:08 +0000] discovery.php(29504): Error: (1046) No database selected [2016/02/25 07:37:08 +0000] discovery.php(29504): ====== Schema update 265 -> 266 ============== [2016/02/25 07:37:08 +0000] discovery.php(29504): Query: ALTER TABLE `snmp_errors` DROP INDEX `error_index`; [2016/02/25 07:37:08 +0000] discovery.php(29504): Error: (1046) No database selected [2016/02/25 07:37:08 +0000] discovery.php(29504): Query: ALTER TABLE `snmp_errors` ADD UNIQUE `error_index` (`device_id`, `error_code`, `snmp_cmd`, `mib`(50), `oid`(100)); [2016/02/25 07:37:08 +0000] discovery.php(29504): Error: (1046) No database selected The strange thing is that I recently upgraded another server with no issues. The only difference is that I added the following config line later as there was an alert in the GUI (and now I'm adding it from start): $config['db_extension'] = 'mysqli'; Any hint will be greatly appreciated. Best regards, Pau

2 2

hey thanks for "Reset Limits" [SEC=UNCLASSIFIED]
by Peter.Hine＠familycourt.gov.au 25 Feb '16

25 Feb '16

just found it thanks VM Peter Hine Senior Technical Support Engineer (Servers) FCoA ITS peter.hine(a)familycourt.gov.au ********************************************************************** The information contained in this e-mail (including any attachments) is for the exclusive use of the addressee. If you are not the intended recipient please notify the sender immediately and delete this e-mail. It is noted that legal privilege is not waived because you have read this e-mail. **********************************************************************

1 0

Possible bug
by Nagy Attila 24 Feb '16

24 Feb '16

Hi all, We are using a customized location rewrite function to split the SNMP location of devices into a human readable and a machine understandable format. We are using the community edition, and on updating to the recent version we were faced with thIS error message: PHP Fatal error: Cannot redeclare custom_rewrite_location() (previously declared in /opt/observium/config.php:87) in /opt/observium/config.php on line 102 This is a common error when a php file is included/required more than once, so I made a workaround by renaming config.php to config.user.php and using require_once() in the original config.php to load these directives (it needs absolute path otherways it cannot find the file). Shouldn't require_once/include_once be used in all the places where referencing config.php? Br, Tylla,

5 10

Observium syslog year -0001
by Jason Vanlandingham 24 Feb '16

24 Feb '16

Lately (Since last CE update, I think) I've been seeing syslog messages for my Cisco router with a date stamp of "-0001-11-30" with text reading just something like "1:1". A little searching reveals that there was a mail list post from July 2014 for the same thing happening with Netgear equipment, but the only way I could see that post was through Google's cached result, and I can't find any replies. Is anyone else getting this? Known issue, perhaps?

1 0

Cisco SB SFP DOM/DDM monitoring
by chott＠praha1.net 24 Feb '16

24 Feb '16

Hello team, today i find OID for SFP monitoring in Cisco SB in this case there is OID and CLI info from CISCO SG300-10 switch and SFP in slot GI9 with DOM support can you add to Observium ? like Catalyst switches? Only in CLI there is mW for Power in SNMPwalk there is dBm but same value dBm is right value for DOM monitoring iso.3.6.1.4.1.9.6.1.101.90.1.2.1.3.57.5 = INTEGER: 47 iso.3.6.1.4.1.9.6.1.101.90.1.2.1.3.57.6 = INTEGER: 3211700 iso.3.6.1.4.1.9.6.1.101.90.1.2.1.3.57.7 = INTEGER: 6289 iso.3.6.1.4.1.9.6.1.101.90.1.2.1.3.57.8 = INTEGER: -6809 iso.3.6.1.4.1.9.6.1.101.90.1.2.1.3.57.9 = INTEGER: -9626 iso.3.6.1.4.1.9.6.1.101.90.1.2.1.3.57.10 = INTEGER: 0 iso.3.6.1.4.1.9.6.1.101.90.1.2.1.3.57.11 = INTEGER: 0 iso.3.6.1.4.1.9.6.1.101.90.1.2.1.3.57.12 = INTEGER: 0 Port Temp Voltage Current Output Input LOS [C] [Volt] [mA] Power Power [mWatt] [mWatt] ----------- ------ ------- ------- ------- ------- --- gi1 Copper gi2 Copper gi3 Copper gi4 Copper gi5 Copper gi6 Copper gi7 Copper gi8 Copper gi9 47 3.20 6.28 0.20 0.10 No gi10 N/A N/A N/A N/A N/A N/A Temp - Internally measured transceiver temperature Voltage - Internally measured supply voltage Current - Measured TX bias current Output Power - Measured TX output power in milliWatts Input Power - Measured RX received power in milliWatts LOS - Loss of signal N/A - Not Available, N/S - Not Supported, W - Warning, E - Error Tom [email-header-praha1] Tomas Chott technický ředitel chott(a)praha1.net<mailto:chott@praha1.net> Phone: +420 245 004 005 Mobile: +420 733 123 135 Metropolitní síť Praha 1 z.s.p.o. Jindrisska 18 110 00 Praha 1 Czech Republic www.praha1.net<http://www.praha1.net> [Popis: Facebook]<http://www.facebook.com/praha1net> <http://www.linkedin.com/pub/tomas-chott/49/97a/1aa>

4 16

Rancid-Mail configuration
by Sathish.I 23 Feb '16

23 Feb '16

Hi All, I am very new to observium, I have successfully integrated rancid with Observium, taking backup ups. However, I am unable to receive the mail when config difference. Can any share the config template to integrate rancid and mail configuration for configuration changes. Thanks in advance. Regards, sathish

2 1

Correct version not shon after device(raouter) upgradation
by Rakesh Vyas 23 Feb '16

23 Feb '16

Hi, Observium is not showing correct version after router version up gradation. We have to delete and add that device again. Any process to get auto update. Best regards Rakesh Vyas Lead, Network Data Operations Division Network, CORPORATE CENTER Sistema Shyam Teleservices Limited MTS Tower1 Building No. 334, Udyog Vihar Phase IV,Gurgaon MTS +91 913 600 1375 Direct Email: Rakesh.Vyas(a)MTSIndia.in [cid:image001.jpg@01D16E23.17796F00]<http://www.mtsindia.in/> ________________________________ This E-Mail may contain Confidential and/or legally privileged Information and is meant for the intended recipient(s) only. If you have received this e-mail in error and are not the intended recipient/s, Kindly notify the sender and then delete this e-mail immediately from your system. You are also hereby notified that any use, any form of reproduction, dissemination, copying, disclosure, modification, distribution and/or publication of this e-mail, its contents or its attachment/s other than by its intended recipient/s is strictly prohibited and may be unlawful. Internet Communications cannot be guaranteed to be secure or error-free as information could be delayed, intercepted, corrupted, lost, or contain viruses. Sistema Shyam Teleservices Limited does not accept any liability for any errors, omissions, viruses or computer problems experienced by any recipient as a result of this e-mail.

2 1