- observium - lists.observium.org

Device not yet discovered
by Kiru Pananthan 13 Mar '15

13 Mar '15

Dear all getting error on observium, tried to run discovery and poller for all still the same error. any suggestion Device not yet discoveredThis device has not yet been successfully discovered. System information and statistics will not be populated and graphs will not draw. This device should be automatically discovered within 10 minutes. -- Kind regards, Kiru Yogalingam, -- *Confidentiality Disclaimer:* This e-mail and any attachments are confidential and intended solely for the intended addressee and may also be privileged or exempt from disclosure under applicable law. If you are not the intended addressee, or have received this e-mail in error, please notify the sender immediately, delete it from your system and do not copy, disclose, distribute or otherwise act in reliance upon any part of this e-mail or its attachments. Australian International School Malaysia and all affiliates under Taylor's Education Group does not accept responsibility for any loss arising from unauthorised access to, or interference with, any internet communications by any third party in reliance to this email, or from the transmission of any viruses. Please note that any views or opinions presented in this email are solely those of the author and do not necessarily represent those of Australian International School Malaysia and all affiliates under Taylor's Education Group. Replies to this e-mail may be monitored by Australian International School Malaysia and all affiliates under Taylor's Education Group for operational or business reasons.

2 1

WiFi support progress
by Adam Armstrong 12 Mar '15

12 Mar '15

I've been doing a little bit more work on support for WiFi devices (Ruckus at the moment to get the skeleton in place). I'm not a user of enterprise wireless, so I'm not entirely sure what's useful in the UI or not: Coming to an SVN repository near you... adam.

20 53

Munin Alerts.
by Dudu 11 Mar '15

11 Mar '15

Hi All, I have successfully moved a munin under Observium which is very good. One thing that a little bit difficult for me is understanding the alerts part. All the alert examples are reasonable but how would I know if it's possible to alert on Munin Data or other things for example a faulty power supply. Can we alert based on Munin data? Thank you all David

1 0

Re: [Observium] observium Digest, Vol 56, Issue 40
by Dudu 11 Mar '15

11 Mar '15

Thank You. I do agree with you that an IPMI does add a lot of things but I found that the agent+IPMI check provide even more info, One thing that I don't if possible is actually creating an alarm while there is a hardware failure, With Idrac snmp you can do that with one snmpwalk command. Thanks Again > From: observium-request(a)observium.org > Subject: observium Digest, Vol 56, Issue 40 > To: observium(a)observium.org > Date: Wed, 11 Mar 2015 12:00:01 +0000 > > Send observium mailing list submissions to > observium(a)observium.org > > To subscribe or unsubscribe via the World Wide Web, visit > http://postman.memetic.org/cgi-bin/mailman/listinfo/observium > or, via email, send a message with subject or body 'help' to > observium-request(a)observium.org > > You can reach the person managing the list at > observium-owner(a)observium.org > > When replying, please edit your Subject line so it is more specific > than "Re: Contents of observium digest..." > > > Today's Topics: > > 1. Re: Idrac support (Michael Loftis) > > > ---------------------------------------------------------------------- > > Message: 1 > Date: Tue, 10 Mar 2015 21:31:22 -0700 > From: Michael Loftis <mloftis(a)wgops.com> > To: Observium Network Observation System <observium(a)observium.org> > Subject: Re: [Observium] Idrac support > Message-ID: > <CAHDg04swWLkYUAmuFHGrUGq5S5wbXaiVQ6pEG4SgcVPE=C9YQA(a)mail.gmail.com> > Content-Type: text/plain; charset="utf-8" > > You can add the idrac to its associated host directly to poll more data. > Open the host and click the gear icon. There's an area to add the IPMI > controller to the host. Once added IIRC you get some of the various temp > sensors and such from the idrac. > > On Tuesday, March 10, 2015, Dudu <duduhandelman(a)hotmail.com> wrote: > > > Hi All, > > I just bought a subscription and I'm very pleased with the product. > > While I started to add devices I asked my self why not adding the Dell > > Idrac? > > So I did add it but all I can see is a network stuff maybe I'm missing > > something. > > > > The most important part of the IDRAC 7 and above is the led status of the > > server if the led is amber there is a hardware issue. > > Bellow is the OID > > > > Many Thanks > > > > > > query that will get overall system health, they would need to query the > > iDRAC7 SNMP > > > > systemLCDStatus OBJECT-TYPE > > > > SYNTAX ObjectStatusEnum > > > > ACCESS read-only > > > > STATUS mandatory > > > > DESCRIPTION This attribute defines the system status as it is > > reflected by the LCD front panel. Not all system components may be > > included. > > > > > > > > > > > > *SNMP OID to perform Get : 1.3.6.1.4.1.674.10892.5.2.2.0* > > > > > > > > > > > > Possible values for this MIB object is defined as below in MIB : > > > > > > > > other(1) > > > > unknown(2) > > > > ok(3), > > > > nonCritical(4) > > > > critical(5) > > nonRecoverable(6) -- the status of the object is non-recoverable > > (dead > > > > > -- > > "Genius might be described as a supreme capacity for getting its possessors > into trouble of all kinds." > -- Samuel Butler > -------------- next part -------------- > An HTML attachment was scrubbed... > URL: <http://postman.memetic.org/pipermail/observium/attachments/20150310/c023516…> > > ------------------------------ > > Subject: Digest Footer > > _______________________________________________ > observium mailing list > observium(a)observium.org > http://postman.memetic.org/cgi-bin/mailman/listinfo/observium > > > ------------------------------ > > End of observium Digest, Vol 56, Issue 40 > *****************************************

1 0

Idrac support
by Dudu 11 Mar '15

11 Mar '15

Hi All, I just bought a subscription and I'm very pleased with the product. While I started to add devices I asked my self why not adding the Dell Idrac? So I did add it but all I can see is a network stuff maybe I'm missing something. The most important part of the IDRAC 7 and above is the led status of the server if the led is amber there is a hardware issue. Bellow is the OID Many Thanks query that will get overall system health, they would need to query the iDRAC7 SNMP systemLCDStatus OBJECT-TYPE SYNTAX ObjectStatusEnum ACCESS read-only STATUS mandatory DESCRIPTION This attribute defines the system status as it is reflected by the LCD front panel. Not all system components may be included. SNMP OID to perform Get : 1.3.6.1.4.1.674.10892.5.2.2.0 Possible values for this MIB object is defined as below in MIB : other(1) unknown(2) ok(3), nonCritical(4) critical(5) nonRecoverable(6) -- the status of the object is non-recoverable (dead

2 1

Alert rule conditions
by Colin Stubbs 11 Mar '15

11 Mar '15

Apologies if the answer to this is obvious... but is there any way to specify a time range for alert checkers? -Colin

2 2

Re: [Observium] API to Add Device
by Stephen Bateman 10 Mar '15

10 Mar '15

OK, I will just do it manually thanks for the confirmation. ------ Original Message ------ From: "Adam Armstrong" <adama(a)memetic.org> To: "Stephen Bateman" <stephen(a)thebritishgeek.co.uk> Sent: 09/03/2015 21:46:05 Subject: Re: [Observium] API to Add Device >The api doesn't exist. > >There's a contributed abortion which calls itself an api, but it has >nothing to do with us. > >Our api is in development at the moment, which will allow adding >devices. > >Adam. > >Sent with AquaMail for Android >http://www.aqua-mail.com > >On 9 March 2015 15:42:04 "Stephen Bateman" ><stephen(a)thebritishgeek.co.uk> wrote: > >>Is it possible to add a new device via the API ? >>_______________________________________________ >>observium mailing list >>observium(a)observium.org >>http://postman.memetic.org/cgi-bin/mailman/listinfo/observium >>

1 0

API to Add Device
by Stephen Bateman 09 Mar '15

09 Mar '15

Is it possible to add a new device via the API ?

1 0

Not displaying temp and fan data from Cisco ASA
by Peter Loron 09 Mar '15

09 Mar '15

Hello. We're running (for now, planning to get paid) Observium CE 0.14.11.6000. I have 3 Cisco ASA firewalls v9.2(2)4. Most of the data is coming in properly from them, but I'm not getting correct data for the fan speeds and temps. The temp graphs all show 0.0C for the temps. No lines in the graphs, etc. The fan speed graphs have a line that _looks_ like real data, but the legend says "0rpm", and the value axis has numbers like "1.0 z", "2.0 z", etc. Any suggestions or pointers? Thanks. -Pete

3 2

Search by serial number, display serial number
by John Brown 08 Mar '15

08 Mar '15

Hi, I'm trying to search devices by serial number. Also when displaying a list of devices, could it be possible to show the serial number in the summary as well ? thanks

4 4