- observium - lists.observium.org

NTP agent issue
by Ron Marosko 22 Mar '18

22 Mar '18

Howdy Adam, et. al., I've run into an issue with the agent ntpd script on certain of my servers where the command "ntpdc -c iostats" times out with no response. However, the equivalent command used with ntpq works fine and provides the correct information Witness: root@observium:/opt/observium# ntpdc -c iostats localhost: timed out, nothing received ***Request timed out root@observium:/opt/observium# ntpq -c iostats time since reset: 1116387 receive buffers: 10 free receive buffers: 9 used receive buffers: 0 low water refills: 1 dropped packets: 0 ignored packets: 0 received packets: 140116 packets sent: 145459 packet send failures: 0 input wakeups: 140118 useful input wakeups: 140118 root@observium:/opt/observium# Yes, that is actually on the VM running observium. For simplicity of minimum changes to the script, I made the following change: // START SETTINGS /// $ntpq = "ntpq"; $ntpdc = "ntpq"; // END SETTINGS /// End result is this: You can see where I made the change to the script yesterday afternoon. The related version of ntpd is: ntpd - NTP daemon program - Ver. 4.2.8p4 I don't know if you want to push this out as a change overall, but wanted to make you aware of this so that it's documented somewhere at least. Regards, Ron -- Ron Marosko, Jr. . . . . . . . . . . . . . . . . . . . . . . . . . . CCIE No. 4526 (R/S), NN5DX Senior Network Engineer RJR Services, Inc. 1108 West Dickinson Blvd, Suite A Fort Stockton, TX 79735 USA o: +1 432 336 5600 x115 c: +1 432 290 6344 e: <mailto:ron@rjr-services.com> ron(a)rjr-services.com pgp pubkey: <http://pgp.mit.edu:11371/pks/lookup?op=get&search=0x778B3B0258AB8B5C> 0x58AB8B5C "To know me is to fly with me." -- This message has been scanned by E.F.A. Project and is believed to be clean.

5 5

Pseudowires
by Peter Derissen 21 Mar '18

21 Mar '18

Hello, In the menu Ports -> Pseudowires -> All types i can only find the pseudowires that start on a cisco machine. Nu juniper are in that list (there are a few as destination node). Do I have to configure something to show the Juniper routing instances? Regards, Met vriendelijke groet, Peter Derissen Eurofiber Nederland Network Engineer Safariweg 25-31 +31 (0)6 11587110 3605 MA Maarssen [EF-logo_rood_RGB -handtekening]<http://www.eurofiber.nl/> Volg ons op Twitter<https://twitter.com/Eurofiber> | Linkedin<https://www.linkedin.com/company/eurofiber> | Youtube<https://www.youtube.com/user/Eurofibergroup> ******** IMPORTANT NOTICE ******** This e-mail (including any attachments) may contain information that is confidential or otherwise protected from disclosure and it is intended only for the addressees. If you are not the intended recipient, please note that any copying, distribution or other use of information contained in this e-mail (and its attachments) is not allowed. If you have received this e-mail in error, kindly notify us immediately by telephone or e-mail and delete the message (including any attachments) from your system. Please note that e-mail messages may contain computer viruses or other defects, may not be accurately replicated on other systems, or may be subject of unauthorized interception or other interference without the knowledge of sender or recipient. Eurofiber only sends and receives e-mails on the basis that Eurofiber is not responsible for any such computer viruses, corruption or other interference or any consequences thereof. Eurofiber Nederland B.V. is registered in the Chamber of Commerce of Amsterdam with number 34134377, VAT number NL 8088.51.524 B01.

5 19

Port Percent Graph looks messy (9107)
by Serghei Golipad 19 Mar '18

19 Mar '18

Hi, Has anyone else encountered this issue after latest updates (rolling). Graph format is set to 'none' [cid:image001.jpg@01D3BF8D.6E924510] Thank you. PLEASE CONSIDER THE ENVIRONMENT BEFORE PRINTING THIS EMAIL. CDW Limited is a Company registered in England and Wales. This email is sent for and on behalf of CDW Finance Holdings Limited. CDW Finance Holdings Limited is the UK holding company for CDW Limited trading as CDW. The registered office for CDW Finance Holdings Limited (Company Number 05872067) and its UK group undertakings is 10 Fleet Place, London, EC4M 7RB. VAT Registration 902 1949 39. Confidentiality: This e-mail contains proprietary information, some or all of which may be confidential and/or legally privileged. It is for the intended recipient only. If an addressing or transmission error has misdirected this e-mail, please notify the author by replying to this e-mail and then delete the original. If you are not the intended recipient you may not use, disclose, distribute, copy, print or rely on any information contained in this e-mail. You must not inform any other person other than CDW or the sender of its existence. For more information about CDW please visit www.uk.cdw.com

3 9

CBQoS
by Ian Armstrong 15 Mar '18

15 Mar '18

Hi When the CBQoS feature will be fully released? I am using the unofficial (?) feature in the CE edition (about below). I have purchased a subscription but the CBQoS isn't supported their yet. I'm finding it a bit buggy (understandably since it hasn't been officially released). Ian Observium CE 17.9.0 (25th September 2017) OS Linux 4.4.0-62-generic [amd64] (Ubuntu 16.04) Apache 2.4.18 (Ubuntu) PHP 7.0.25-0ubuntu0.16.04.1 (OPcache: ENABLED) Python 2.7.12 MySQL 5.7.17-0ubuntu0.16.04.1 (extension: mysqli 5.0.12-dev) SNMP NET-SNMP 5.7.3 RRDtool 1.5.5 Ian Armstrong Principal Academic Staff Member School of Information Technology DDI: +64 4 830 3055 Email: ian.armstrong(a)weltec.ac.nz<mailto:joe.serci@weltec.ac.nz> URL: www.weltec.ac.nz<http://www.weltec.ac.nz/> WelTec Private Bag 39803, Lower Hutt 5045 Wellington, New Zealand [1504644128592_PastedImage]

3 6

How to configure libvirt in observium CE?
by Vikas Kumar 15 Mar '18

15 Mar '18

Hello all, I want to configure libvirt in observium. Can someone please help me how to do that? -- <http://moodi.org/> *Vikas Kumar | ** Hospitality & PR Coordinator* *Mood Indigo, IIT Bombay* *+91-9694532954 | mailvikasnow(a)gmail.com <mailvikasnow(a)gmail.com>* [image: Facebook] <https://www.facebook.com/vikas.cse.iitb> <https://mailtrack.io/> Sent with Mailtrack <https://mailtrack.io?utm_source=gmail&utm_medium=signature&utm_campaign=sig…>

1 0

any examples of developing a new PDU in observium?
by Darrell Budic 14 Mar '18

14 Mar '18

Going to try and setup a couple Starline Bus heads in observium, basically a big PDU with it’s own MIBS. http://www.starlinepower.com, the Critical Power Monitoring units. Anyone have any examples of something similar or a new PDU that could point me in the right direction for this? Thanks, -Darrell

1 0

Logging changes to Observium
by Josh Williams 14 Mar '18

14 Mar '18

Is there a way to log who is doing what whithin Observium? I would like to be able to tell who is adding or deleting devices, making changes to the config, or making any changes to Observium for that matter. I am not able (allowed) to lock down the config by making changes in the config.php. I have to keep the configs open to be changed by anyone on the team. This is truthfully a null point as the admin and root passwords are mandated to be stored in our team password vault anyway. I'd like a way to make others accountable for their actions. Thanks, Josh

1 0

proxmox support
by Art Stephens 13 Mar '18

13 Mar '18

I see these php scripts at https://github.com/pgmillon/observium/tree/master/includes/polling/unix-age… DO I just copy the script to the appropriate folder? -- Arthur Stephens Senior Network Administrator Ptera Inc. PO Box 135 24001 E Mission Suite 50 Liberty Lake, WA 99019 509-927-7837 ptera.com | facebook.com/PteraInc | twitter.com/Ptera ----------------------------------------------------------------------------- "This message may contain confidential and/or propriety information, and is intended for the person/entity to whom it was originally addressed. Any use by others is strictly prohibited. Please note that any views or opinions presented in this email are solely those of the author and are not intended to represent those of the company."

2 5

Ubiquiti EdgeSwitch 16 Port 10G missing light levels
by Kaiser, Erich 13 Mar '18

13 Mar '18

Looks like most of the stats are there except for optical light levels? Erich Kaiser The Fusion Network erich(a)gotfusion.net Office: 815-570-3101

3 2

disabling alert re-notification.
by Edvinas K 12 Mar '18

12 Mar '18

Hello, i wanted to know if it's possible to turn off alert resending. I see we have this option in config.php: $config['alerts']['interval'] = 86400; // How frequently to re-send a notification for a continuing alert condition do changing it to zero will stop it ? Thank you

2 2