- observium - lists.observium.org

Strange error
by Andrew Colin 16 Mar '16

16 Mar '16

Hi Guys Strange one When a device is down it always shows the downtime as per below Any ideas why it says 1year?

2 1

APC device detected as power instead of environment
by Louis Bailleul 15 Mar '16

15 Mar '16

Hi, I have a few APC AP9340 which are some environmental sensors collector. They are detected quite well but are categorized as Power device instead of Environmental. I have attached debug discovery and poller for one of them. Best regards, Louis

2 2

invalid args passed into function error @ r7676
by Rob VanHooren 15 Mar '16

15 Mar '16

greetings. I’m seeing this when running discovery of a c3750 ipbase v12.2(35)SE5 thoughts? thx. R. ##### Module Start: vlans ##### VLANs: CISCO-VTP-MIB (Domain 1) 1 172 192 666 999 1002 1003 1004 1005 1011 1020 1023 1024 1025 1027 1030 1031 1033 1035 1037 1039 1101 1102 1103 1104 1106 1107 1108 1110 2000 2008 2009 2010 2011 2012 2015 2016 2017 2019 2020 2021 2022 2023 2025 2026 2027 2030 2031 2032 2033 2034 2035 2037 2038 2039 2040 2045 2046 2047 2048 2049 2050 2051 2210 2221 4001 Q-BRIDGE-MIB Invalid arguments passed into function get_port_by_index_cache(). Please report to developers. Invalid arguments passed into function get_port_by_index_cache(). Please report to developers. Invalid arguments passed into function get_port_by_index_cache(). Please report to developers. Invalid arguments passed into function get_port_by_index_cache(). Please report to developers. Invalid arguments passed into function get_port_by_index_cache(). Please report to developers. Invalid arguments passed into function get_port_by_index_cache(). Please report to developers. Invalid arguments passed into function get_port_by_index_cache(). Please report to developers. Invalid arguments passed into function get_port_by_index_cache(). Please report to developers. Invalid arguments passed into function get_port_by_index_cache(). Please report to developers. Invalid arguments passed into function get_port_by_index_cache(). Please report to developers. Invalid arguments passed into function get_port_by_index_cache(). Please report to developers. Invalid arguments passed into function get_port_by_index_cache(). Please report to developers. Invalid arguments passed into function get_port_by_index_cache(). Please report to developers. Invalid arguments passed into function get_port_by_index_cache(). Please report to developers. Invalid arguments passed into function get_port_by_index_cache(). Please report to developers. Invalid arguments passed into function get_port_by_index_cache(). Please report to developers. Invalid arguments passed into function get_port_by_index_cache(). Please report to developers. Invalid arguments passed into function get_port_by_index_cache(). Please report to developers. Invalid arguments passed into function get_port_by_index_cache(). Please report to developers. Invalid arguments passed into function get_port_by_index_cache(). Please report to developers. Invalid arguments passed into function get_port_by_index_cache(). Please report to developers. Invalid arguments passed into function get_port_by_index_cache(). Please report to developers. Invalid arguments passed into function get_port_by_index_cache(). Please report to developers. Invalid arguments passed into function get_port_by_index_cache(). Please report to developers. Invalid arguments passed into function get_port_by_index_cache(). Please report to developers. Invalid arguments passed into function get_port_by_index_cache(). Please report to developers. Invalid arguments passed into function get_port_by_index_cache(). Please report to developers. Invalid arguments passed into function get_port_by_index_cache(). Please report to developers. Invalid arguments passed into function get_port_by_index_cache(). Please report to developers. Invalid arguments passed into function get_port_by_index_cache(). Please report to developers. Invalid arguments passed into function get_port_by_index_cache(). Please report to developers. Invalid arguments passed into function get_port_by_index_cache(). Please report to developers. Invalid arguments passed into function get_port_by_index_cache(). Please report to developers. ERROR: Device does not support per-VLAN community. Module [ vlans ] stats: 1[V+] 172[V+] 192[V+] 666[V+] 999[V+] 1002[V+] 1003[V+] 1004[V+] 1005[V+] 1011[V+] 1020[V+] 1023[V+] 1024[V+] 1025[V+] 1027[V+] 1030[V+] 1031[V+] 1033[V+] 1035[V+] 1037[V+] 1039[V+] 1101[V+] 1102[V+] 1103[V+] 1104[V+] 1106[V+] 1107[V+] 1108[V+] 1110[V+] 2000[V+] 2008[V+] 2009[V+] 2010[V+] 2011[V+] 2012[V+] 2015[V+] 2016[V+] 2017[V+] 2019[V+] 2020[V+] 2021[V+] 2022[V+] 2023[V+] 2025[V+] 2026[V+] 2027[V+] 2030[V+] 2031[V+] 2032[V+] 2033[V+] 2034[V+] 2035[V+] 2037[V+] 2038[V+] 2039[V+] 2040[V+] 2045[V+] 2046[V+] 2047[V+] 2048[V+] 2049[V+] 2050[V+] 2051[V+] 2210[V+] 2221[V+] 4001[V+] o Duration 11.076s

1 0

multi site support?
by Bernd Kammlott | kaneo GmbH - green IT solutions 15 Mar '16

15 Mar '16

hey, currently we are using cacti to collect snmp data but your solutions looks much better :) Currently we are collecting data from all our customers into one centralized system on one of our servers. Would it be possible to have some kind of "multi site" installation with observium to give our customers access to their data? We dont want to setup Observium for each of our customers, but want them to be able to have a look at the current state their systems. I could not find any documentation about this feature, is is possible? Maybe with groups or locations? -- Mit freundlichen Grüßen Bernd Kammlott Systemintegration kaneo GmbH - green IT solutions | Lüner Weg 32a | D-21337 Lüneburg Tel.: +49 4131 22 700 73 | Mobil: +49 170 833 32 67 | E-Mail: bernd.kammlott(a)kaneo-gmbh.de Internet: www.kaneo-gmbh.de | www.facebook.com/kaneo.green.solutions Geschäftsführung: Andreas Kammlott, Nele Lübberstedt | Amtsgericht Lüneburg: HRB 205201 B | USt-ID: DE815486812 | Bitte prüfen Sie der Umwelt zuliebe, ob der Ausdruck dieser E-Mail erforderlich ist.|

5 8

Ethernet Service Instance Interface Names Truncated
by Mailing Lists 15 Mar '16

15 Mar '16

Am I imagining things, or did Observium previously correctly display Ethernet service instance interfaces in the GUI? I've noticed recently that all the interfaces names for service instance interfaces seem to be truncated in a few of the views Picture speaks a thousand words, where these show GigabitEthernet0/16. now, I am sure they previously would have been listed as GigabitEthernet0/16.ServiceInstance.1234 etc; [image: Inline images 1] [image: Inline images 4] Discovery debug example from the device shows the interfaces captured as the full name: ( [ifDescr] => GigabitEthernet0/1.ServiceInstance.206 [ifAlias] => Description [ifName] => Gi0/1.SI.206 [ifType] => l2vlan [ifOperStatus] => up ) If you search in the ports for for the full interface name it knows it as the right thing; [image: Inline images 2] Looks like the GUI just truncates the names? Obviously this makes it harder than it should be to identify the correct interface in the list. Any chance we can have this show the whole thing? :) Thanks, Tim C

6 11

Reporting Devices down when they are up
by Andrew Colin 15 Mar '16

15 Mar '16

Hi Guys I am getting a strange issue Observium is reporting certain devices as down when they are up. I can snmpwalk to them from the server but the gui says they are down Any ideas? Thanks Andrew

2 2

Cisco SG350 as Generic device
by chott＠praha1.net 15 Mar '16

15 Mar '16

Hello, please can you help me with new Cisco SG350XG switches? Snmpwalk attached Observium recognize this Cisco switch as Generic device Tom

2 2

SNMP access via poller issues
by Cameron Murray 15 Mar '16

15 Mar '16

Guys, Overnight we received a lot of alerts for device going offline however these were false positives. We've found that the poller is having issues connecting to some devices. Brocade ICX Switch Cisco 2900 series RouterOS SNMP is working via snmpwalk on the machine running obs and also from other test locations however the poller times out on them. We've reset the configuration for the devices in obs however access still fails. Access appears to come and go. We've confirmed obs is up to date and have rebooted the services. Regards, Cameron Murray Senior Communications Manager How am I doing? Please click here<http://www.techpath.com.au/contact-us/feedback/> to rate my work. [cid:image001.png@01D1739A.5BC99370]<http://www.techpath.com.au/> P 1300 033 300 F 07 3809 3999 E cameron(a)techpath.com.au www.techpath.com.au<http://www.techpath.com.au> Unit 2/55 Tradelink Rd, Hillcrest QLD 4118 [Facebook]<http://www.facebook.com/techpathau> [Twitter]<http://twitter.com/techpathau> [LinkedIn]<http://www.linkedin.com/company/techpathau> Note: This message may contain privileged and confidential information that is the property of the intended recipient. The information herein is intended only for use of the addressee. If you are not the intended recipient, then you are requested to return e-mail to TechPath Pty Ltd and destroy any copies made. Copying or disseminating any of this message is prohibited. Any views expressed in this message are those of the individual sender and may not necessarily reflect the views of TechPath Pty Ltd.

4 9

Reset password tool on main website
by Gavin Henry 15 Mar '16

15 Mar '16

Hi, Been waiting for a while now with two emails I know to work. Can someone check? Trying to get my subscription username as a renewed one still has the old one and it's just timed out now. Thanks. -- Kind Regards, Gavin Henry. http://www.surevoip.co.uk

4 23

cannot find device
by Jeffrey d'Ambly 14 Mar '16

14 Mar '16

I have a device that I cannot discover or delete, in observium Professional How can I fix this? mysql> select hostname, device_id FROM devices WHERE hostname LIKE 'ams-sw121'; +-----------+-----------+ | hostname | device_id | +-----------+-----------+ | ams-sw121 | 176 | +-----------+-----------+ 1 row in set (0.00 sec) mysql> exit Bye [root@sjc-corp-net01 ~]# /home/observium/discovery.php -h 176 Observium 0.15.5.6406 Discovery Current Revision : 6406 New Revision : 7674 WARNING: 0 devices discovered. Did you specify a device that does not exist? Memory usage: 4.5MB (peak: 4.5MB) MySQL: Cell[21/0.03s] Row[0/0s] Rows[2/0s] Column[0/0s] Update[0/0s] Insert[0/0s] Delete[0/0s] [root@sjc-corp-net01 ~]# [root@sjc-corp-net01 ~]# /home/observium/delete_device.php -h 176 Observium 0.15.5.6406 Remove Device Device -h doesn't exist! [root@sjc-corp-net01 ~]#

3 5