- observium - lists.observium.org

Frontpage map show province with ISO 3166-2
by Florian Znottka 01 Nov '13

01 Nov '13

Hello! Observium works for me like a charm, but I have a problem with the frontpage map: I can't get a province with a region ISO 3166-2 code (e.g. DE-SH) as a full map on the frontpage. Only working configuration is to show the whole country (e.g. DE) which is a bit to big. All co-locations of our servers are too close to each other (20 miles) , so that you can't figure out on the map, which location is which. My config.php so far: $config['frontpage']['map']['resolution'] = "provinces"; $config['frontpage']['map']['region'] = "DE-SH"; $config['frontpage']['map']['dotsize'] = "1"; error-message: Request map does not exist. Is my config file incorrect or does it not work? Or is there another method to zoom in on the map? Thanks for help Kind Regards Florian

4 3

Error drawing Graph
by Roman Romanyak 01 Nov '13

01 Nov '13

Hello everyone, I'm having strange issue, and spend a lot of time troubleshooting this without any success. Getting error 'error drawing graph' only for some devices only - EX4200 switches, which are located in the remote datacenter. After I started seeing issue, I install another switch here in local datacenter and added it to observium and its working good. Could be the issue in latency - the delay is about 30ms? discovery and poller scripts run good, the only thing I noticed that for the devices that don't work I in rrd/<device_name>/ files port-###.rrd are missing. The CPU and Memory graphs are working good, only network graphs are having errors. Thanks, Roman.

3 2

Re: [Observium] graphe on pose
by Adam Armstrong 31 Oct '13

31 Oct '13

This is most certainly related to network conditions or polling frequency. The poller must run every 5 minutes. Make sure you are running the latest version (svn update) Adam. Zoran Lukenic <z.lukenic(a)mediactive.fr> wrote: >I didn't know that the screenshot will not be able in the mail. >So I have problems with all graphs on all devices. My graphs are OK but they have some hole. Some time 30min, some time more. >I have this same devices on my cacti, behind same firewall and I don't have this problem. > >ps: I don't know if I do the right thing for answer. > >------------------------------ > >Message: 2 >Date: Wed, 30 Oct 2013 17:34:09 +0000 >From: Zoran Lukenic <z.lukenic(a)mediactive.fr> >To: "observium(a)observium.org" <observium(a)observium.org> >Subject: [Observium] graphe on pose >Message-ID: > <286037ABC3D0D74DB5172245EF4597970144239E(a)srv-exchange01.exchange.mediactive.fr> > >Content-Type: text/plain; charset="iso-8859-1" > >Hello, > >I have some problem with my graphe ( cf: screenshot ) > >I looked in FAQ and some Mailing Liste archive but I didn't find any one with the same problem. > >do you have some idea where to look? > > > > > > > > >--- >Zoran Lukenic >z.lukenic(a)mediactive.fr<mailto:z.lukenic@mediactive.fr> >--- >Groupe Mediactive >3-4-10, cit? Paradis 75010 Paris >Tel : +33 1 55 28 80 60 >Fax : +33 1 55 28 80 61 >Support technique : 0 892 494 777 >www.groupe-mediactive.fr<http://www.groupe-mediactive.fr/> >Twitter : @mediactivegroup >[cid:FB003B7F-1839-4401-8DAE-B37B718E4644] >

2 1

graphe on pose
by Zoran Lukenic 31 Oct '13

31 Oct '13

I didn't know that the screenshot will not be able in the mail. So I have problems with all graphs on all devices. My graphs are OK but they have some hole. Some time 30min, some time more. I have this same devices on my cacti, behind same firewall and I don't have this problem. ps: I don't know if I do the right thing for answer. ------------------------------ Message: 2 Date: Wed, 30 Oct 2013 17:34:09 +0000 From: Zoran Lukenic <z.lukenic(a)mediactive.fr> To: "observium(a)observium.org" <observium(a)observium.org> Subject: [Observium] graphe on pose Message-ID: <286037ABC3D0D74DB5172245EF4597970144239E(a)srv-exchange01.exchange.mediactive.fr> Content-Type: text/plain; charset="iso-8859-1" Hello, I have some problem with my graphe ( cf: screenshot ) I looked in FAQ and some Mailing Liste archive but I didn't find any one with the same problem. do you have some idea where to look? --- Zoran Lukenic z.lukenic(a)mediactive.fr<mailto:z.lukenic@mediactive.fr> --- Groupe Mediactive 3-4-10, cit? Paradis 75010 Paris Tel : +33 1 55 28 80 60 Fax : +33 1 55 28 80 61 Support technique : 0 892 494 777 www.groupe-mediactive.fr<http://www.groupe-mediactive.fr/> Twitter : @mediactivegroup [cid:FB003B7F-1839-4401-8DAE-B37B718E4644]

1 0

Alerts
by cbermudez＠tothus.net 31 Oct '13

31 Oct '13

Hi List. At present i have installed the latest versión of Observium and i am trying to configure an alert for a temperature sensor of a cisco catalyst and i do not how. On the other hand, i don´t have any alert in the home screen (right upper corner Alerts: 0), it is normal? i have rebooted some devices and disconnect some ports and the alerts still 0, but the emails with alerts are send correctly. Thanks so much. Cristian,

2 2

Cisco asa5510 ipsec tunnels
by cbermudez＠tothus.net 31 Oct '13

31 Oct '13

Hi list!! Configuring my asa device I have encounter a problem with the tunnels ipsecs. When I view the active tunnels on the observium interface, I see not only the actives, I see other tunnels ipsec or remote vpns connections ipsec that is not active really. It seem like the list of active tunnels is not updating. Thank you very much for the help. Cristian Enviado desde mi BlackBerry de Movistar (http://www.movistar.com.ar)

2 1

graphe on pose
by Zoran Lukenic 31 Oct '13

31 Oct '13

Hello, I have some problem with my graphe ( cf: screenshot ) I looked in FAQ and some Mailing Liste archive but I didn't find any one with the same problem. do you have some idea where to look? --- Zoran Lukenic z.lukenic(a)mediactive.fr<mailto:z.lukenic@mediactive.fr> --- Groupe Mediactive 3-4-10, cité Paradis 75010 Paris Tel : +33 1 55 28 80 60 Fax : +33 1 55 28 80 61 Support technique : 0 892 494 777 www.groupe-mediactive.fr<http://www.groupe-mediactive.fr/> Twitter : @mediactivegroup [cid:FB003B7F-1839-4401-8DAE-B37B718E4644]

2 1

traffic from transit/peering ports is not being generated
by Guilherme de Freitas Figueiredo 30 Oct '13

30 Oct '13

Gentlemen, I'm having trouble generating the graphics Transit / Peering, I put the description of the interface as described in the wiki ( http://www.observium.org/wiki/Interface_Description_Parsing), but when I go to the Ports menu -> Transit and Peering he do not show any graph. Below is some information about the descriptions: xe-0/0/0.3664 up up NTT Provider (AS2914) [2Gbps] Would be the case of removing part of [2Gbps]? He returns the following: Total Graph for ports of type: Transit None found. Regards! []s! -- Guilherme de Freitas Figueiredo

3 3

Custom Interface Port Speed
by cbermudez＠tothus.net 30 Oct '13

30 Oct '13

Hi list! I wonder f you could read my message. I´m very excited configuring observium, please anybody can help me with this issue? ------------------------------------------------------------------------ I am cristian from argentina, I have started using observium and I think that is a great tool! I am very happy with him!! I wonder if I could set specific speed value for a port of my router when at present I have connected my 6 Mbps internet connection. Tank you to all Cristian ------------------------------------------------------------------------

5 5

Upgrading to SVN stopped SNMP on my Zhones
by Brian Merrell 30 Oct '13

30 Oct '13

ZNID-GE-2424-NA-0GN- Zhone Indoor Network Interface Device; Release S2.5.073; We're looking at an 8 port zhone as well (better for triple play). I had 40 in that I need to monitor usage for but because of the SNMP issues affected by existing method of usage collection I have to take them out until I know i have a stable new setup for them with this. We have more but don't need to collect stats on all of them as that usually becomes somewhat cost prohibitive.

1 0