- observium - lists.observium.org

Switch uptime
by Eduardo Schoedler 14 Oct '15

14 Oct '15

Hi, Is there a problem with switches uptime? [image: Imagem inline 2] # /usr/bin/snmpget -v2c -c 'xxxxxxxx' -Pu -OQUst -m SNMPv2-MIB -M /opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp 'udp':'my-host':'161' sysObjectID.0 sysUpTime.0 sysObjectID.0 = enterprises.4413 sysUpTime.0 = 227811800 # snmpwalk -v 2c -c xxxxxxxx my-host sysUpTime DISMAN-EVENT-MIB::sysUpTimeInstance = Timeticks: (227812500) 26 days, 8:48:45.00 Thank you. -- Eduardo Schoedler

1 0

10gbps port showing as 10bps
by Cameron Murray 12 Oct '15

12 Oct '15

As the subject says we've recently installed a 10gbps Dell switch and the ports are showing as bps not gbps. ALERT Modify<http://cacti.bettacomputers.com.au/device/device=99/tab=alert/alert_entry=5…> Alert Utilization has exceeded 80% Entity tengigabitethernet1/0/1<http://cacti.bettacomputers.com.au/device/device=99/tab=port/port=2260/> Conditions ifInOctets_perc gt 80 (623770) ifOutOctets_perc gt 80 (631740) Metrics ifInOctets_perc = 623770 ifOutOctets_perc = 631740 Duration 3 days, 1h 13m 43s (2015-09-28 13:43:41) Device Device bne-be-l2r16-sw10g<http://cacti.bettacomputers.com.au/device/device=99/> Hardware Operating System Generic Device Location Uptime 3 days, 3h 46m 24s The ports that are trained up as 1gbps show correctly however higher do not. Port Data: port_id => 2260 device_id => 99 port_64bit => 1 port_label => tengigabitethernet1/0/1 port_label_base => null port_label_num => null port_label_short => Te1/0/1 port_descr_type => null port_descr_descr => null port_descr_circuit => null port_descr_speed => null port_descr_notes => null ifDescr => tengigabitethernet1/0/1 ifName => te1/0/1 portName => null ifIndex => 1 ifSpeed => 10 ifConnectorPresent => true ifPromiscuousMode => true ifHighSpeed => 10000 ifOperStatus => up ifAdminStatus => up ifDuplex => fullDuplex ifMtu => 1500 ifType => ethernetCsmacd ifAlias => ifPhysAddress => f8b15686e676 ifHardType => null ifLastChange => 2015-09-28 11:37:54 date-7da Australia/Brisbane (UTC+10) ifVlan => 1 ifTrunk => dot1Q ifVrf => null ignore => 0 disabled => 0 detailed => 0 deleted => 0 pagpOperationMode => null pagpPortState => null pagpPartnerDeviceId => null pagpPartnerLearnMethod => null pagpPartnerIfIndex => null pagpPartnerGroupIfIndex => null pagpPartnerDeviceName => null pagpEthcOperationMode => null pagpDeviceId => null pagpGroupIfIndex => null ifInUcastPkts => 0 ifInUcastPkts_delta => 0 ifInUcastPkts_rate => 0 ifOutUcastPkts => 0 ifOutUcastPkts_delta => 0 ifOutUcastPkts_rate => 0 ifInErrors => 0 ifInErrors_delta => 0 ifInErrors_rate => 0 ifOutErrors => 0 ifOutErrors_delta => 0 ifOutErrors_rate => 0 ifOctets_rate => 199209 ifUcastPkts_rate => 0 ifErrors_rate => 0 ifInOctets => 30302781555 ifInOctets_delta => 46292430 ifInOctets_rate => 152780 ifOutOctets => 15509016948 ifOutOctets_delta => 14067927 ifOutOctets_rate => 46429 ifInOctets_perc => 255 ifOutOctets_perc => 255 poll_time => 1444083140 poll_period => 303 ) Regards, Cameron Murray Remote Support Engineer How am I doing? Please click here<http://www.techpath.com.au/contact-us/feedback/> to rate my work. [cid:image001.png@01D1000F.A5564960]<http://www.techpath.com.au/> P 1300 033 300 F 07 3809 3999 E cameron(a)techpath.com.au www.techpath.com.au<http://www.techpath.com.au> Unit 2/55 Tradelink Rd, Hillcrest QLD 4118 Formerly Betta Computer Services Pty Ltd [Facebook]<http://www.facebook.com/techpathau> [Twitter]<http://twitter.com/techpathau> [LinkedIn]<http://www.linkedin.com/company/techpathau> Note: This message may contain privileged and confidential information that is the property of the intended recipient. The information herein is intended only for use of the addressee. If you are not the intended recipient, then you are requested to return e-mail to TechPath Pty Ltd and destroy any copies made. Copying or disseminating any of this message is prohibited. Any views expressed in this message are those of the individual sender and may not necessarily reflect the views of TechPath Pty Ltd.

6 20

Problem adding user to view a port / vlan
by Stephen Bateman 11 Oct '15

11 Oct '15

Hi Everyone, Is there a procedure for adding a single user who I want to see vlan traffic statistics and the ports on a switch. I have tired creating a normal user which worked fine. However when I select the device and the port and click Add nothing happens. When I click refresh it still says "This user currently has no permitted ports" Any help would be appreciated, I am using the Professional version 0.15.10.7095 Thanks Stephen

1 0

Re: [Observium] email alert showing device_ping
by Gavin Henry 11 Oct '15

11 Oct '15

You might want you have scrubbed that image or fixed your firewall: https <https://proxmox.zeplin.co.uk:8006/#v1:0:18:4::::>:// <https://proxmox.zeplin.co.uk:8006/#v1:0:18:4::::>proxmox.zeplin.co.uk <https://proxmox.zeplin.co.uk:8006/#v1:0:18:4::::>:8006/#v1:0:18:4:::: <https://proxmox.zeplin.co.uk:8006/#v1:0:18:4::::>::

2 1

email alert showing device_ping
by Simon Smith 11 Oct '15

11 Oct '15

Hi All, has anybody noticed the weird alerts being sent by email or is it just myself with this issue? I have an alert setup to tell me if device_uptime is between 0 and 600 then alert me (rebooted kit/server) however the email is showing the words device_ping under the email alerts where a graph would show if the alert had a graph attached a screenshot to show you what i mean regards Simon

1 0

aggregate graphs
by Jeffrey d'Ambly 09 Oct '15

09 Oct '15

Is there way to create aggregate graphs using graph.php? —Jeff

2 4

Orphaned ports
by Aaron Mayfield 09 Oct '15

09 Oct '15

I've been digging around in my database, trying to figure out why I have a large number of ports listed in my observium interface, compared to the number of devices I have. I have discovered several devices that were removed (via delete_device.php) a while back, but it seems that the ports table wasn't completely cleaned up. These devices were removed from the devices table: mysql> select * from devices where device_id in(45,66,67,68,69,70,71,72,73); Empty set (0.00 sec) mysql> But the ports for these devices weren't entirely removed: mysql> select device_id,count(*) as "number of ports" from ports where device_id IN(45,66,67,68,69,70,71,72,73) group by device_id; +-----------+-----------------+ | device_id | number of ports | +-----------+-----------------+ | 45 | 4153 | | 66 | 4153 | | 67 | 4153 | | 68 | 4153 | | 69 | 4153 | | 70 | 1569 | | 71 | 4153 | | 72 | 4153 | | 73 | 4153 | +-----------+-----------------+ 9 rows in set (0.01 sec) mysql> These devices were probably F10/Dell M1000e cards, which I removed from observium because of the large number of l2vlan interfaces on each was causing a processor burden when polled. Rather than fight with them, I just removed them. My question is this, how can I clean up the remnants? Can I just delete these orphaned ports from the table? Or will I break anything if I do that? Thanks This email and any files transmitted with it are confidential and intended solely for the use of the individual or entity to whom they are addressed. If you have received this email in error, please notify the system manager. Please note that any views or opinions present in this email are solely those of the author and do not necessarily represent those of the company. Finally the recipient should check this email and any attachment for the presence of viruses. The company accepts no liability for any damage caused by any virus transmitted by this email. (Proprietary & Confidential - Artisan Infrastructure, Inc. et all.)

2 2

DRBD Stats / Agent
by Robert Williams 09 Oct '15

09 Oct '15

Hi, Is anyone successfully using the agent to retrieve DRBD statistics? We may be suffering from http://jira.observium.org/browse/OBSERVIUM-574 - I'm not 100%, but I wondered if anyone had fixed it or found a workaround and simply hadn't shared their findings on Jira? Cheers all! Robert Williams Custodian Data Centre Email: Robert(a)CustodianDC.com http://www.CustodianDC.com

2 2

Multiple OSPF processes
by Miguel Berniz 09 Oct '15

09 Oct '15

Hello, I have noticed only 1 OSPF process is detected on cisco devices. I have a Catalyst 4500 with 3 processes but only one of them is handle by observium. Is this the normal behavior or does it require special config or not supported at all? Thanks in advance, Miguel

2 1

Update http://www.observium.org/docs/add_device/ for missing "search" line with resolv.conf
by Przemysław S. Knycz 08 Oct '15

08 Oct '15

Hello! I've wird problem with "Can't resolve ...." when adding device (from ./add_device.php and from website). Te solution was simple - there was missing "search domain" at /etc/resolv.conf - i don't find this kind of problem and solution, so you can add it at site to Troubleshooting. Thanks. Regards. -- . Przemyslaw Stanislaw Knycz, +48 601391681 . | WiFi&fiber engineer, xmpp:djrzulf@gmail.com | ` Futurama: You can't prove it won't happen '

1 0