- observium - lists.observium.org

Re: [Observium] observium Digest, Vol 51, Issue 84
by Rutger Bevaart 22 Oct '14

22 Oct '14

On 22 Oct 2014, at 09:38, observium-request(a)observium.org wrote: ? > > On Wed, Oct 22, 2014 at 10:53 AM, Rutger Bevaart <rutger(a)xconnect24.com> > wrote: > >> Hi all, >> >> I can confirm that the issue is gone in 5903! >> >> Thanks Mike & Joe for the excellent input (and fix)! >> >> Let me know if any additional input, debugging or testing. >> >> Regards, >> Rutger I have been too quick to judge, the issue is still there, although it seems to be less. Ideas?

3 3

Overriding location codes
by Robbie Wright 22 Oct '14

22 Oct '14

We've got custom locations defined in config.php so all of our devices use a 3 or 4 digit location code for snmp, Observium reads the location code, checks config.php and sets the full address. We have some devices that do not have location in snmp so we set it manually by overriding it in the device settings. However, overriding sysLocation and providing a custom location does not compare that location to what is setup in the config.php. So can a custom location setting check config.php for the value? Robbie Wright Siuslaw Broadband <http://siuslawbroadband.com> 541-902-5101

1 0

polling issues with 5897
by Rutger Bevaart 22 Oct '14

22 Oct '14

Hi, Updated to the latest svn version yesterday, after which I immediately had issues with the poller. Updated from a release about two weeks older. Now I get up/down for different devices, sometimes complete BGP neighbours down on others. Device down alerts on snmp, etc. I increased the number of poller processes in the crontab and increased snap timeout values etc. However, I still have graphs with large parts missing because of this. Checked poller times, kept an eye on the processes running and logs. Some devices take 120s to poll completely, but all polling is done in about 2 minutes. Still I get these errors, other than the upgrade no changes have been made to firewalls, policies, etc. Any clues? Do I need to upgrade php? Regards, Rutger

4 8

Re: [Observium] polling issues with 5897
by Rutger Bevaart 22 Oct '14

22 Oct '14

On 21 Oct 2014, at 21:13, observium-request(a)observium.org wrote: > Date: Tue, 21 Oct 2014 10:27:50 -0400 > From: Joseph Zancocchio <joseph(a)nyi.net> > To: observium(a)observium.org > Subject: Re: [Observium] polling issues with 5897 > Message-ID: <54466D66.70006(a)nyi.net> > Content-Type: text/plain; charset="windows-1252"; Format="flowed" > > I believe I have been experiencing the same issue with the latest stable > update, and have narrowed down the problem I have seen to the changes > made in revision 5884. Can you try to svn up -r 5883 (make sure to > switch to the current branch if you are using the stable currently) and > see if everything works, and if so, svn up -r 5884 to see if the > behavior returns? > > -Joe I can confirm that after reverting back to 5883 the problem disappears. Polling takes a similar amount of time on both versions. Will let it run for a night and upgrade a single version tomorrow to see if the issue reappears. Regards, Rutger

2 1

memory graph / draw error
by Massimo Sala 21 Oct '14

21 Oct '14

Hi I just installed Observium on Debian 7.6 : Observium CE 0.14.4.5229 Apache nginx/1.2.1 PHP 5.4.4-14+deb7u14 MySQL 5.5.40-MariaDB-1~wheezy-log SNMP NET-SNMP version: 5.4.3 RRDtool 1.4.7 I have added 80 routers ( Cisco / Juniper / HP ) and most of them display fine. On some devices, the memory graph show "draw error". How can I troubleshoot this ? Best regards, Sala

1 0

memory graphs / how to disable
by Massimo Sala 21 Oct '14

21 Oct '14

per subject, we have only routers and we are interested only in traffic graphs. best regards, Sala

2 4

Re: [Observium] Ruckus Access points
by Franks Andy (RLZ) IT Systems Engineer 20 Oct '14

20 Oct '14

Can I add extreme/Enterasys to this too? :-) -----Original Message----- From: observium [mailto:observium-bounces@observium.org] On Behalf Of Eduardo Schoedler Sent: 20 October 2014 16:09 To: Observium Network Observation System Subject: Re: [Observium] Ruckus Access points +1 That will be great. I can provide information (snmpwalks, etc) about Ruckus ZoneDirector. 2014-10-20 12:45 GMT-02:00 Lakhwinder Singh <luckymuk.330(a)gmail.com>: > Hello all > Is anybody managing Ruckus access points with observium? All the > ruckus access points are presented as Generic device and I would also > like to get graphs for number of users connected, for all the SSIDs. > Thanks > > _______________________________________________ > observium mailing list > observium(a)observium.org > http://postman.memetic.org/cgi-bin/mailman/listinfo/observium > -- Eduardo Schoedler _______________________________________________ observium mailing list observium(a)observium.org http://postman.memetic.org/cgi-bin/mailman/listinfo/observium

1 0

Ruckus Access points
by Lakhwinder Singh 20 Oct '14

20 Oct '14

Hello all Is anybody managing Ruckus access points with observium? All the ruckus access points are presented as Generic device and I would also like to get graphs for number of users connected, for all the SSIDs. Thanks

2 1

Re: [Observium] wmi calls
by Franks Andy (RLZ) IT Systems Engineer 20 Oct '14

20 Oct '14

Hi Dennis, Are you willing to make a contribution to the open source thing irrespective of the code looking better? Just need to prove things to the boss. ;-) Andy From: observium [mailto:observium-bounces@observium.org] On Behalf Of Dennis Kruyt Sent: 20 October 2014 12:46 To: 'Adam Armstrong'; 'Observium Network Observation System' Subject: Re: [Observium] wmi calls Hi, We are using WMI, we also already extend it to include more. When the code looks better we’ll send a patch… Dennis,- Van: observium [mailto:observium-bounces@observium.org] Namens Adam Armstrong Verzonden: zaterdag 18 oktober 2014 4:46 Aan: Observium Network Observation System Onderwerp: Re: [Observium] wmi calls Hi Andy, The WMI code was contributed by a user who seems to have vanished. I'm not sure if there's anyone around who knows how it works, certainly myself and the other official developers don't have any WMI experience. I've never used it and I'm not sure if anyone else is using it. The lack of replies suggests the latter. adam. ------ Original Message ------ From: "Franks Andy (RLZ) IT Systems Engineer" <Andy.Franks(a)sath.nhs.uk> To: observium(a)observium.org Sent: 11/10/2014 08:30:26 Subject: [Observium] wmi calls Hi all, I’m trying to get observium work with some of our windows servers, particularly for mssql and exchange stuff. Couple of Q’s – Exchange – it’s not pickup up any data, but maybe this is because we’re using 2003 – is this “supported”. I use the quotes as the wmi stuff is listed as very much in development so possibly not working.. MSSQL – again no data, all zeros like with exchange. I tried the polling.php wmi specific command, but I can’t see any wmi stuff particularly – just the standard snmp. Thanks in advance andy

1 0

wmi calls
by Franks Andy (RLZ) IT Systems Engineer 20 Oct '14

20 Oct '14

Hi all, I'm trying to get observium work with some of our windows servers, particularly for mssql and exchange stuff. Couple of Q's - Exchange - it's not pickup up any data, but maybe this is because we're using 2003 - is this "supported". I use the quotes as the wmi stuff is listed as very much in development so possibly not working.. MSSQL - again no data, all zeros like with exchange. I tried the polling.php wmi specific command, but I can't see any wmi stuff particularly - just the standard snmp. Thanks in advance andy

3 2