- observium - lists.observium.org

Display of VRF's defined on a particular device in addition to globally?
by Steve Costaras 27 Jan '16

27 Jan '16

Is there a way to display what VRF's are defined on a particular switch like you can vlans/ports/etc, in addition to globally? I'm running 0.16.17407. We have several thousand VRF's, being able to see what VRF's are actually defined on a device would really be nice opposed to having to log in each time when tracking things down. Since observium is obviously pulling this data to come up with the global view, it has to have it recorded. I think this would just be a display/parsing item? Is this something that may be included in a future version? Thanks. Steve

2 2

how to disable mib via config.php?
by Gediminas Karčmarinas 26 Jan '16

26 Jan '16

in default.inc.php is: $config['mibs']['EtherLike-MIB']['enable'] = 1; I try in config.php $config['mibs']['EtherLike-MIB']['disable'] = 1; or $config['mibs']['EtherLike-MIB']['enable'] = 0; But it don't disable this mib. How to disable mib ? Thanks

2 6

Email issue
by Matt Zillmann 26 Jan '16

26 Jan '16

Hello everyone, I am stuck on setting up email for alerting on Observium. I am running Centos7 and the latest Stable version of Observium (subscription version). What is needed to configure this? Or what is recommended? Thank you, Matt

1 0

Problem on some graphs - Percent Utilisation
by Alexandre Corso 26 Jan '16

26 Jan '16

Hi everybody. I had a problem on some graph on my observium, for exemple graph Percent Utilisation of ports. I looked into the errors: RRDTool Output: ERROR: Unused Arguments "" in command : HRULE:100#555:: I modified my file : /opt/observium/html/includes/graphs/port/percent.inc.php - - line 25 $defs .= ' HRULE:100#555::'; + + line 25 $defs .= ' HRULE:100#555:'; - - line 26 $defs .= ' HRULE:-100#555::'; + + line 26 $defs .= ' HRULE:-100#555:’; I removed one ‘’:’’ at the end and it’s working. Is it a mistake ? Regards, -- Alexandre Corso acorso(a)franceix.net

2 2

Adding a new graph
by David Pinkerton 26 Jan '16

26 Jan '16

Observium newbie... This maybe a question that has been answered a million time but I've not been able to find an answer. I have an Avaya 4524 switch that is not in a climate controlled environment. I wish to graph the temperature within Observium. I know the OID is 1.3.6.1.4.1.45.1.6.3.7.1.1.5 and the calibration is .5 degreee. ( ie. 70 = 35 degrees) I can view this in the switches GUI and by snmpwalk. I have confirmed Observium is using the correct MIB for the device. Can someone point me to a newbie guide. (My php skills are minimal)

2 2

Alerts ifType eq ethernetCsmacd
by Joey Stanford 26 Jan '16

26 Jan '16

Howdy, I wanted to thank everyone for the great support on this mailing list. I have another puzzler…the last one I hope. At the bottom of https://www.observium.org/docs/alerting_examples/ there are two alerts that rely on ifType eq ethernetCsmacd For some odd reason when I rebuild they don’t want to apply to any of my devices. As soon as I change that to “*” they bring in all the devices. I went out and pulled the data on the Mikrotik router ports and they are responding with this same ifType. I checked it vis snmpwalk and also on a test router using http://ip/device/device=1/tab=port/port=1/view=data/ I’ve tried spelling out equals, wrapping ethernetCsmacd in quotes (view=data says it’s a 14 character string), and a few other things but I haven’t found the right incantation. These two entries currently match the examples and the demo server. I’ve ensured that I have non-disabled ports and non-ignored ports that should be recognized. &debug=1 reveals SELECT `alert_status` FROM `alert_table` WHERE 1 AND `alert_test_id` = '7' AND (( `device_id` NOT IN (55) AND (`device_id` != ‘' AND `device_id` IS NOT NULL))) ORDER BY `device_id`, `alert_test_id`, `entity_type`, `entity_id` DESC (not there wasn’t a LIMIT 0,100 at the end of that select like on other alerts…aside from that this select is the same as the other alerts) Anyway that select returned 0 hits despite me having well over 100 active ports with that ifType. Any suggestions on how to debug this further? Thanks, Joey

3 8

Is there something like "bad_ifalias" ?
by Hábner Teixeira Costa 25 Jan '16

25 Jan '16

Hi everyone, the company where I work is an ISP and they have big routers like MX-960 and ASR-9010.This devices supports thousands of interfaces and we use it to connect to our customers.I would like to know whether is possible to ignore our customers interfaces based on ifAlias like we do with ifDesc (bad_if)?Thank you! Hábner

2 3

Observium: Pre-auth and security questions
by Nate Mellendorf 25 Jan '16

25 Jan '16

Tom, I overlooked that setting and made the suggested change. However, Observium still seems to prompt for credentials after I sign in with basic auth. I changed the login mechanism to http-auth as well: $config['auth_mechanism'] = "http-auth"; I'll keep working on this, and report back if I can get it working. Thank you. Nate Mellendorf | NETWORK ANALYST | Netgain 720 West Saint Germain Street | St. Cloud | MN | 56301 Phone: 320.251.4700 x183 | 877.797.4700 x183 www.NetgainHosting.com The information contained in this email message is for the designated recipient only and may be privileged, confidential, and protected from disclosure. If you have received this message in error, please notify the sender immediately and delete the original. Any dissemination, distribution, copying or other use of this message or any information contained within is strictly prohibited. -----Original Message----- From: observium [mailto:observium-bounces@observium.org] On Behalf Of observium-request(a)observium.org Sent: Monday, January 25, 2016 5:24 AM To: observium(a)observium.org Subject: observium Digest, Vol 66, Issue 168 Send observium mailing list submissions to observium(a)observium.org To subscribe or unsubscribe via the World Wide Web, visit http://postman.memetic.org/cgi-bin/mailman/listinfo/observium or, via email, send a message with subject or body 'help' to observium-request(a)observium.org You can reach the person managing the list at observium-owner(a)observium.org When replying, please edit your Subject line so it is more specific than "Re: Contents of observium digest..." Today's Topics: 1. BGP LocalAs fails on ASR9K (Andr? Mamitzsch) 2. Problem on some graphs - Percent Utilisation (Alexandre Corso) 3. Re: Problem on some graphs - Percent Utilisation (Adam Armstrong) 4. Re: Observium: Pre-auth and security questions (Tom Laermans) ---------------------------------------------------------------------- Message: 1 Date: Mon, 25 Jan 2016 11:05:26 +0100 From: Andr? Mamitzsch <andre(a)mamitzsch.de> To: observium(a)observium.org Subject: [Observium] BGP LocalAs fails on ASR9K Message-ID: <56A5F366.9050403(a)mamitzsch.de> Content-Type: text/plain; charset="utf-8" Hi, we discovered an issue with CISCO ASR9K and 4byte ASN's - the ASR return "0" when querying the BGP4-MIB parameter "bgpLocalAs". This stops observium from discovering the BGP sessions. I have done some research and found that Juniper devices seem to have a similar problem which was fixed in the polling / discovery script already. The same should be done for Cisco. The CISCO-BGP4-MIB included in Observium is somewhat outdated - CISCO introduced a parameter "cbgplocalAs" in a later version which delivers the correct result. Could you please look into this ? Thanks Andre

2 1

frontpage is great and all but can I have a second page?
by James Murty 25 Jan '16

25 Jan '16

I’m looking a using Observium to generate a number of metric specific dashboards for routers and switches I have around the country. The $config['frontpage']['minigraphs']['ids’] = “<id>,<metric>,<title>”; configuration looks like it’ll give me what I want but ideally I just have those minigraphs on a page by themselves. Is there a way to define a seconds page? i.e. $config[‘minigraphpage']['minigraphs']['ids’] = “<id>,<metric>,<title>”; and have that show on a second screen? - james

3 2

BGP LocalAs fails on ASR9K
by André Mamitzsch 25 Jan '16

25 Jan '16

Hi, we discovered an issue with CISCO ASR9K and 4byte ASN's - the ASR return "0" when querying the BGP4-MIB parameter "bgpLocalAs". This stops observium from discovering the BGP sessions. I have done some research and found that Juniper devices seem to have a similar problem which was fixed in the polling / discovery script already. The same should be done for Cisco. The CISCO-BGP4-MIB included in Observium is somewhat outdated - CISCO introduced a parameter "cbgplocalAs" in a later version which delivers the correct result. Could you please look into this ? Thanks Andre

1 0