- observium - lists.observium.org

BRIDGE-MIB keep track of mac
by Nikolay Shopik 06 May '12

06 May '12

Does observium using BRIDGE-MIB to keep track mac addresses? I see it included in mib dir, but I unable to find any way to see mac addresses on switches. Basically I'm talking about this functionality http://www.cisco.com/en/US/tech/tk648/tk362/technologies_tech_note09186a008…

2 1

join mailing list
by eric machine 04 May '12

04 May '12

like to join mailing list

2 2

NLNOG Ring
by Adam Armstrong 01 May '12

01 May '12

Hi All, I'd like to direct your attention to another project run by some friends of mine: the NLNOG RING. The project is based around the goals of making network debugging much easier. When trying to debug complex problems and plan future upgrades, a point of view from outside your network is absolutely essential. Seeing what others see is incredibly useful when dealing with a variety of network problems. Well known examples are 'it works for even numbered ip address, but not for odd numbered ip address via this and this route'. To streamline such debugging the NLNOG RING was formed. In essence the project is very simple: you make a (virtual) machine available to the RING, and you gain access on all other servers which are part of the RING. The project currently has 98 nodes, located on 89 participant networks in 24 countries. The RING provides tools to trivially launch a ping from all these nodes and summarize the results to, other examples are distributed tracerouting and MTU testing. The RING also maintains a record of latencies between nodes using smokeping to help identify historic problems. Before applying to join, keep the following requirements in mind: * The organisation you work for has BGP routers connected to the "Default Free Zone". * Your organisation has its own ASN, IPv4 and IPv6 prefix(es). * You have enable or configure rights on those routers. * You have permission from your organisation to become involved in the NLNOG RING. Have a look at https://ring.nlnog.net/for more information. You can also email ring-admins(a)ring.nlnog.net with any questions you have. adam.

1 0

Subdirectory
by churnd dnruhc 01 May '12

01 May '12

Is it possible to use observium on a webserver as a subdirectory, i.e. https://server/observium? I'm a small shop that's part of a bigger organization & I don't have access to DNS to create a subdomain. Apologies if this has been answered already. I did a quick search & saw a similar question asked, but the thread didn't seem to contain an answer I could see. TIA

7 8

Re: [Observium] Ironware CPU Patch
by Adam Armstrong 30 Apr '12

30 Apr '12

The old one is also hundredths. The only kid which gives while units is one of the new ones. Adam. -- Sent from my Android phone with K-9 Mail. Please excuse my brevity. Matthias Cramer <matthias.cramer(a)iway.ch> wrote: Hi Adam On 30/04/12 15:29, Adam Armstrong wrote: > The newer OIDs come from a newer version of the MIB. > > Incidentally, 1300 / 100 is 13. If it was displaying 0.13, then there is some maths failure within the polling code (or discovery is storing the wrong settings in the database). True, I noticed that. Observium seams to do everything right for this OID, but it is not getting this oid, it is getting the "old" one. And there I get real percents back. Attached is a Screenshot of that MIB part. The real question is in my opinion, how to get the new OID to work. The Processor discovery as it is now can in my opinion only detect the old one. Regards Matthias -- Matthias Cramer / mc322-ripe Senior Network & Security Engineer iway AG Phone +41 43 500 1111 Badenerstrasse 569 Fax +41 44 271 3535 CH-8048 Zürich http://www.iway.ch/ GnuPG 1024D/2D208250 = DBC6 65B6 7083 1029 781E 3959 B62F DF1C 2D20 8250 _____________________________________________ observium mailing list observium(a)observium.org http://postman.memetic.org/cgi-bin/mailman/listinfo/observium

2 2

Ironware CPU Patch
by Matthias Cramer 30 Apr '12

30 Apr '12

Hi The scale of the discovered CPU's on Ironware based geer is off by factor 100. This patch will fix that. Tested on Brocade XMR4000 Regards Matthias Index: includes/discovery/processors/ironware.inc.php =================================================================== --- includes/discovery/processors/ironware.inc.php (revision 3098) +++ includes/discovery/processors/ironware.inc.php (working copy) @@ -15,11 +15,11 @@ { $usage_oid = ".1.3.6.1.4.1.1991.1.1.2.11.1.1.6." . $index; $usage = $entry['snAgentCpuUtil100thPercent']; - $precision = 100; + $precision = 1; } elseif ($entry['snAgentCpuUtilValue']) { $usage_oid = ".1.3.6.1.4.1.1991.1.1.2.11.1.1.4." . $index; $usage = $entry['snAgentCpuUtilValue']; - $precision = 100; + $precision = 1; } list($slot, $instance, $interval) = explode(".", $index); -- Matthias Cramer / mc322-ripe Senior Network & Security Engineer iway AG Phone +41 43 500 1111 Badenerstrasse 569 Fax +41 44 271 3535 CH-8048 Zürich http://www.iway.ch/ GnuPG 1024D/2D208250 = DBC6 65B6 7083 1029 781E 3959 B62F DF1C 2D20 8250

3 5

Web links
by Mark Murphy 28 Apr '12

28 Apr '12

I have installed the software and I get the login page bur every link I click on after that gives a 404 error. This is a Ubuntu server and the default web is only the monitoring software. I made the updates according to the install instructions.

2 1

No VLANs tab / Cisco 2960S / 0.12.4.3087
by Adam Armstrong 27 Apr '12

27 Apr '12

Aha. This is because we check for 1,2 and two, three for vtp version. This will be fixed later today, i'm just rewriting the discovery module to be more sane. adam. On 2012-04-27 07:15, Damien BASTIE wrote: > One result : > > SNMPv2-SMI::enterprises.9.9.46.1.1.1.0 = INTEGER: 3 > > ________________________________________ > De : Adam Armstrong [adama(a)memetic.org] > Date d'envoi : vendredi 27 avril 2012 00:25 > À : Damien BASTIE > Objet : Re: RE : [Observium] No VLANs tab / Cisco 2960S / 0.12.4.3087 > > and : > > > > .1.3.6.1.4.1.9.9.46.1.1.1.0 > > > > adam. >

1 0

No VLANs tab / Cisco 2960S / 0.12.4.3087
by Damien BASTIE 27 Apr '12

27 Apr '12

Hi, I am testing Observium for the first time I have no VLANs tab for a stack Cisco 2960S, it is normal ? Cisco 2960 S / cat29xxStack / C2960S-UNIVERSALK9-M / Cisco IOS 12.2(55)SE2 (UNIVERSALK9) If i can send any debug no problem ! Regards, Damien

5 10

data missing on BGP IPv4 prefixes graphs
by Dario Calamai 23 Apr '12

23 Apr '12

Hello! there are an "Error Drawing Graph" on BGP IPv4 Prefixes page graphs. (/routing/protocol=bgp/type=all/graph=prefixes_ipv4unicast/view=graphs/) I don't know if this error appears in last update... little question about mail notification: do you have disabled the notification of DOWN of a BGP Peer? it works when peering is going UP or FLAP only! many thanks! dario -- http://www.playnet.it phone +39 055 3226622 - fax +39 055 3226444 Brain Technology s.p.a. - AS 13284 http://www.linkedin.com/in/dariocalamai

2 2