- observium - lists.observium.org

Aggregate graphs
by Christian Eriksson 22 Feb '19

22 Feb '19

Hi, Is it possible to aggregate grahps from a selected graph, eg. firewall sessions within a device group? I have made one for all our Cisco security contexts and want to see total sessions at once See attachment Best regards Christian

3 6

Renamed interface - how to keep unified history?
by Adam Thompson 21 Feb '19

21 Feb '19

I made a change on one of our routers that caused a new ifIndex & name to be assigned to a customer circuit (interface). Observium is correctly reporting the data on the old virtual i/f (which still technically exists) and – naturally – separately on the new virtual i/f. Is there any way to (retroactively???) tell Observium that these are really the same interface, and to display only one graph for the two ifIndexes? Or, if I correct the situation so the old ifIndex & name is being showing traffic again, is there any way to move, or inject, the collected data on the ‘new’ port into the ‘old’ port’s RRDs? (i.e. avoid a multi-day gap in a multi-year dataset) We are reasonably up-to-date, running 19.2.9712 – not sure what other info will be helpful here. Thanks, -Adam Adam Thompson Consultant, Infrastructure Services [merlin-email-logo] 100 - 135 Innovation Drive Winnipeg, MB, R3T 6A8 (204) 977-6824 or 1-800-430-6404 (MB only) athompson(a)merlin.mb.ca<mailto:athompson@merlin.mb.ca> www.merlin.mb.ca<http://www.merlin.mb.ca/>

3 5

Alert Checker Question
by Ryan Huff 20 Feb '19

20 Feb '19

I have an alert checker called, "device down" and it tests for "device_status = 0". Occasionally, this alert will fire, but the underlying OS still has network connectivity to these device (ICMP). What this tells me, is that the underlying SNMP daemon on the server may be malfunctioning, because if OBS can't make and SNMP poll to a device, it makes sense to me that it would think the device_status = 0 for that device. So given that this doesn't seem to be an OBS issue, is it something others have encountered and found away around? I'm Ubuntu 18.04 here... just wondering if I need to throttle the poller or if there are other known way the community has addressed this? Thanks, Ryan

2 2

L2/L3VPN issues with Juniper MIBs
by Luis Balbinot 19 Feb '19

19 Feb '19

Hi. This has been bothering me for some time but I've only got the time to look at it now. When we list Ports for any given Juniper device we get a nice green label right below the speed/MTU/lag column with the name of the VRF when it's an L3VPN. Why not the same for L2VPNs? That would be nice, specially if the RT is encoded in the name (makes tracking issues easier). Second, on the righthand side of the Ports table there's an unnamed column right next to the MAC Address with some information regarding the interfaces, LAG membership, etc. There's a xconnect icon that is supposed to show the remote interface and device for L2VPNs, but that's completely messed up (see image attached). Are you aware of that? Can that be fixed? The device is correct, but the interface isn't. The same goes for L3VPN. The interfaces shown on that right column are not endpoints of the same VPN and even the devices are wrong. I'd love to help on that. Just checking ahead to see if there's anything stopping you from fixing it at MIB level or something. Thanks! Luis

1 0

Session lifetime
by Ricardo Franco Cantero 18 Feb '19

18 Feb '19

Hi, We just upgraded our Observium and (perhaps it's already mentioned but the archive doesn't work) since the upgrade we keep being logged out every 30 minutes or so. We have it running on a large screen but every 30 minutes (it looks like 30 minutes, haven't timed it) it need to enter my credentials again to log in. I know I can check the box Remember my Credentials but that's not what I'm asking. I want it to keep the session alive longer like it did. Kind regards, Ricardo Franco Cantero

6 10

IPv6 privacy addresses vs IP Session binding
by Darrell Budic 18 Feb '19

18 Feb '19

Pretty obvious when I figured out what was happening, IPv6 privacy addresses aren’t really compatible with IP Session binding. As I discovered and was driven nuts by for a day or two after my ISP added v6 :) If you’re using v6 and seeing rapid session expiry, try disabling IP Session binding. Consider this a RFE for IP Session binding on IPv4 addresses only. Maybe a second request for a loose form of IPv6 session binding to within the same network range (either /64 or user configurable?) to allow some restrictions on it? Not sure how feasible that would be, but it sounds like it could give us some reasonable v6 protections. Thanks for reading, -Darrell

1 0

Custom Widgets
by Mirditor Kuçaj 18 Feb '19

18 Feb '19

Hello I am searching for a way to customize the widgets. With the old dashboard it was easy with the frontpage filters. With the new one I cant EDIT the SYSLOG Widget for displaying only desired severity and any Filter (Only in widget, not in global config) And the device status boxes doesnt display more than 10 boxes even if I has a lot of dashboard space. Displays a unclickable XX more Is there any documentation where can I edit them. I am running Observium 19.1.9661 Regards Mirditor Kuçaj Backbone Network Director <mailto:miri@abissnet.al> miri(a)abissnet.al Abissnet Sh.a. +355 69 60 91 364 +355 (0)44 300 003 Ext 139 Rr. Ismail Qemali, Pallati Abissnet, Tiranë <http://www.abissnet.al/> www.abissnet.al <https://www.facebook.com/Abissnet> <https://plus.google.com/u/0/+AbissnetalISP> <https://www.linkedin.com/profile/view?id=AAIAABqLWRAB88ljU6t8b67oVm8PAlvPrh mPybE&trk=nav_responsive_tab_profile%20>

1 0

Question on alerts migration
by xomka686 16 Feb '19

16 Feb '19

Hi Adam, Recently you've mentioned "/migrate_alerts/" link to be used to migrate old alert format to the new one. Is it's usage documented anywhere? Or it's just 1-click operation? I was looking for such functionality and have a few customers with old alerting seaking for easy migration to new style. --- Best regards, Sergei

2 1

Questions regarding parsing
by Ryan Huff 15 Feb '19

15 Feb '19

Are there currently any built-in ways (that I clearly would have missed in the documentation) to create/add custom parsing/metrics? For example; I am a telephony engineer and my routers do the normal route-y things, but they also do specialized things with specialized configurations that are not present on all or most routers (e.g Dial Peers). Is there a way to define/capture configuration sections to parse (clearly, outside the bounds of SNMP, I get it..) and then either populate as a tile on the device page or some type of menu item added to the navigation bar; thinking perhaps the regex engine that is used to create the Syslog alerts or something.. I hate one-offing and "plugin'ing" code, cause then that's something I have to support; so I'm committed to using OB the way its offered, just trying to see if there was a creative way to get this done.. Thanks, Ryan Huff, CCDP, CCNP Cisco Certified Network and Design Professional

1 0

Edit Alert Association Ruleset
by Steve 15 Feb '19

15 Feb '19

Hi, is it possible to edit "Alert Association Ruleset" on an alert checker ? How? Many Thanks Steve

2 4