- observium - lists.observium.org

S Dnem Rozhdeniya!
by Rob VanHooren 06 Mar '14

06 Mar '14

and *nobody* took a moment to say it yesterday? better late than never :-) cheers, R. > On Mar 6, 2014, at 5:09 AM, observium-request(a)observium.org wrote: > > Send observium mailing list submissions to > observium(a)observium.org > > To subscribe or unsubscribe via the World Wide Web, visit > http://postman.memetic.org/cgi-bin/mailman/listinfo/observium > or, via email, send a message with subject or body 'help' to > observium-request(a)observium.org > > You can reach the person managing the list at > observium-owner(a)observium.org > > When replying, please edit your Subject line so it is more specific > than "Re: Contents of observium digest..." > > > Today's Topics: > > 1. Re: Graphing Apple Airport traffic (Adam Armstrong) > 2. Re: Graphing Apple Airport traffic (Tom Laermans) > 3. Re: Port tracking issue with IPv6 (Maxence BITTERLI) > > > ---------------------------------------------------------------------- > > Message: 1 > Date: Wed, 05 Mar 2014 20:50:44 -0600 > From: Adam Armstrong <adama(a)memetic.org> > To: Observium Network Observation System <observium(a)observium.org> > Subject: Re: [Observium] Graphing Apple Airport traffic > Message-ID: <15b4e7a93cae33d4399a815bbd24074e(a)memetic.org> > Content-Type: text/plain; charset=UTF-8; format=flowed > > > Depends upon how it's done, probably not with the stuff being dropped > into "graphs", but if it's written in a sensible fashion I can probably > move it to a better place. > > adam. > >> On 2014-03-05 19:57, Steve Evans wrote: >> Some hacking later, I have each of my airport base stations reporting >> the WiFi stats seen by their clients thus: >> >> Is this of interest for the greater good? >> >> Steve >> >> On 23 Feb 2014, at 22:46, Steve Evans <Steve(a)SCEvans.com> wrote: >> >> Tracking roaming could be very useful for understanding where wifi >> access points are needed. Much of the power in data is the associations >> between it. Several years ago I authored the SUN-PLATFORM-MIB as an >> extension to the ENTITY-MIB. That was all about associations. >> >> Steve >> >> On 23 Feb 2014, at 21:55, Adam Armstrong <adama(a)memetic.org> wrote: >> >> On 2014-02-23 14:50, Steve Evans wrote: >> One challenge, if graphing the wirelessClientsTable, would be the fact >> that as the clients came and went their corresponding entries in the >> tables would come and go. There would therefore be gaps in the >> recording of packets associated with these nodes. That's a fairly >> simple concept, but how would you manage roaming whereby a client hops >> between base stations? Would you try to tie these together so that a >> trace of traffic associated with such a client, irrespective of base >> station would be available? I think that decision might shape any >> framework; ie would it be base station or client centric? Of course >> more than one view may be desirable. >> >> And you see why no one has written any software to do this before... >> >> I try to stay away from recording any history for transient things, >> we'll store a count and sometimes a snapshot of the state, but more >> than that usually not. >> >> Though, it depends how useful it would be in the end. We do store >> history for MAC accounting, and this is vaguely similar. >> >> adam. >> _______________________________________________ >> observium mailing list >> observium(a)observium.org >> http://postman.memetic.org/cgi-bin/mailman/listinfo/observium >> >> >> _______________________________________________ >> observium mailing list >> observium(a)observium.org >> http://postman.memetic.org/cgi-bin/mailman/listinfo/observium > > > ------------------------------ > > Message: 2 > Date: Thu, 06 Mar 2014 09:00:28 +0100 > From: Tom Laermans <tom.laermans(a)powersource.cx> > To: Observium Network Observation System <observium(a)observium.org> > Subject: Re: [Observium] Graphing Apple Airport traffic > Message-ID: <53182B1C.3040806(a)powersource.cx> > Content-Type: text/plain; charset=ISO-8859-1; format=flowed > > The current very simple "wifi client count" was/is also under > graphs/wireless, which is probably why it's there in Steve's patch. :-) > >> On 06/03/2014 03:50, Adam Armstrong wrote: >> >> Depends upon how it's done, probably not with the stuff being dropped >> into "graphs", but if it's written in a sensible fashion I can >> probably move it to a better place. >> >> adam. >> >>> On 2014-03-05 19:57, Steve Evans wrote: >>> Some hacking later, I have each of my airport base stations reporting >>> the WiFi stats seen by their clients thus: >>> >>> Is this of interest for the greater good? >>> >>> Steve >>> >>> On 23 Feb 2014, at 22:46, Steve Evans <Steve(a)SCEvans.com> wrote: >>> >>> Tracking roaming could be very useful for understanding where wifi >>> access points are needed. Much of the power in data is the >>> associations between it. Several years ago I authored the >>> SUN-PLATFORM-MIB as an extension to the ENTITY-MIB. That was all >>> about associations. >>> >>> Steve >>> >>> On 23 Feb 2014, at 21:55, Adam Armstrong <adama(a)memetic.org> wrote: >>> >>> On 2014-02-23 14:50, Steve Evans wrote: >>> One challenge, if graphing the wirelessClientsTable, would be the fact >>> that as the clients came and went their corresponding entries in the >>> tables would come and go. There would therefore be gaps in the >>> recording of packets associated with these nodes. That's a fairly >>> simple concept, but how would you manage roaming whereby a client hops >>> between base stations? Would you try to tie these together so that a >>> trace of traffic associated with such a client, irrespective of base >>> station would be available? I think that decision might shape any >>> framework; ie would it be base station or client centric? Of course >>> more than one view may be desirable. >>> >>> And you see why no one has written any software to do this before... >>> >>> I try to stay away from recording any history for transient things, >>> we'll store a count and sometimes a snapshot of the state, but more >>> than that usually not. >>> >>> Though, it depends how useful it would be in the end. We do store >>> history for MAC accounting, and this is vaguely similar. >>> >>> adam. >>> _______________________________________________ >>> observium mailing list >>> observium(a)observium.org >>> http://postman.memetic.org/cgi-bin/mailman/listinfo/observium >>> >>> >>> _______________________________________________ >>> observium mailing list >>> observium(a)observium.org >>> http://postman.memetic.org/cgi-bin/mailman/listinfo/observium >> _______________________________________________ >> observium mailing list >> observium(a)observium.org >> http://postman.memetic.org/cgi-bin/mailman/listinfo/observium > > > > ------------------------------ > > Message: 3 > Date: Thu, 6 Mar 2014 11:11:59 +0100 > From: Maxence BITTERLI <maxence(a)definima.com> > To: observium <observium(a)observium.org> > Subject: Re: [Observium] Port tracking issue with IPv6 > Message-ID: > <CAN1+dXc-STXEws4p0vdduNKD=Hn0DZ4yRL3iX561aXpnYMw_pg(a)mail.gmail.com> > Content-Type: text/plain; charset="iso-8859-1" > > I didn't change anything on my observium server, I got no traffic since I > added these servers. > ls -l /opt/observium/rrd/s29.inter.net/port-* > -rw-r--r-- 1 root root 1739144 mars 6 11:00 /opt/observium/rrd/ > s29.inter.net/port-1.rrd > -rw-r--r-- 1 root root 1739144 mars 6 11:00 /opt/observium/rrd/ > s29.inter.net/port-2.rrd > -rw-r--r-- 1 root root 1739144 mars 6 11:00 /opt/observium/rrd/ > s29.inter.net/port-3.rrd > -rw-r--r-- 1 root root 1739144 mars 6 11:00 /opt/observium/rrd/ > s29.inter.net/port-4.rrd > -rw-r--r-- 1 root root 1739144 mars 6 11:00 /opt/observium/rrd/ > s29.inter.net/port-5.rrd > -rw-r--r-- 1 root root 1739144 mars 6 11:00 /opt/observium/rrd/ > s29.inter.net/port-6.rrd > -rw-r--r-- 1 root root 1739144 mars 6 11:00 /opt/observium/rrd/ > s29.inter.net/port-7.rrd > > I added my poller output with debug option. > > Thanks for your answer. > > > Maxence > > > 2014-03-05 12:36 GMT+01:00 Tom Laermans <tom.laermans(a)powersource.cx>: > >> Permission problem on your RRD file? Run poller with debug option to see >> what's going on. >> >> v6 is certainly not related. >> >> >> On 03/05/2014 10:17 AM, Maxence BITTERLI wrote: >> >> Hi, >> >> On some machines (debian 6 & 7) I don't have any output of my bandwidth. >> Port information are correct, I can see correct MAC and all IP address >> associated to this port but my graph are empty. >> >> Poller output for eth0 : >> [ifIndex] => 4 >> [ifDescr] => eth0 >> [ifType] => ethernetCsmacd >> [ifMtu] => 1500 >> [ifSpeed] => 1000000000 >> [ifPhysAddress] => 8:x0:xe:xc:ex:xe >> [ifAdminStatus] => up >> [ifOperStatus] => up >> [ifLastChange] => 0:0:00:00.00 >> [ifInOctets] => 529940242 >> [ifInUcastPkts] => 225555807 >> [ifInNUcastPkts] => 0 >> [ifInDiscards] => 0 >> [ifInErrors] => 0 >> [ifInUnknownProtos] => 0 >> [ifOutOctets] => 1075923292 >> [ifOutUcastPkts] => 280183099 >> [ifOutNUcastPkts] => 0 >> [ifOutDiscards] => 0 >> [ifOutErrors] => 0 >> [ifOutQLen] => 0 >> [ifSpecific] => zeroDotZero >> [ifName] => eth0 >> [ifInMulticastPkts] => 0 >> [ifInBroadcastPkts] => 0 >> [ifOutMulticastPkts] => 0 >> [ifOutBroadcastPkts] => 0 >> [ifHCInOctets] => 56364515090 >> [ifHCInUcastPkts] => 225555807 >> [ifHCInMulticastPkts] => 0 >> [ifHCInBroadcastPkts] => 0 >> [ifHCOutOctets] => 275953830236 >> [ifHCOutUcastPkts] => 280183099 >> [ifHCOutMulticastPkts] => 0 >> [ifHCOutBroadcastPkts] => 0 >> [ifHighSpeed] => 1000 >> [ifPromiscuousMode] => false >> [ifConnectorPresent] => true >> [ifAlias] => >> [ifCounterDiscontinuityTime] => 0:0:00:00.00 >> >> Linux 3.10.9-xxxx-grs-ipv6-64 (Debian 7) >> This interface support IPv4 & IPv6 and I actually have some traffic on >> it. >> >> At first I thougth it was a probleme with IPv4 + v6 but I also got an >> old machine with IPv4 only and this machine got empty graph too. >> >> Any idea to solve this ? >> >> Maxence >> >> >> _______________________________________________ >> observium mailing listobservium@observium.orghttp://postman.memetic.org/cgi-bin/mailman/listinfo/observium >

3 2

Polling Taking Longer than 5 minutes for a few devices
by Chip Pleasants 06 Mar '14

06 Mar '14

I have a few devices that take longer than 5 minutes to poll. Looking at the polling information Observium provides it reports 999.99s for two of the three and the third one reports 975.37s under Last Polled. I believe the result of taking to long o poll is the breaks I see in my graphs for only these three devices. These boxes have about 150 vlan interfaces and are fully populated 6509s. I have adjusted the poller-wrapper.py to 10 and $config['snmp']['max-rep'] = 10 right now. A 4 processor VM averages about 60 cpu utilization constantly. The Server's Disk IO Ops/sec average is about 110. Today I only have 52 out of 1300 devices loaded into it. Any suggestions to speed up the polling on these few boxes or is the only solution add another polling server and do odd even or something of that nature. Maybe there is another issue I'm not seeing? Thanks in advance for any assistance/direction. -Chip

5 7

F5 Load Balancers
by Adam Mills 06 Mar '14

06 Mar '14

Has any done any development on monitoring of F5s? Around monitoring of VIPs, conns per second, pool members, etc? -- Adam Mills Network Engineer Email: amills(a)riotgames.com Mobile: +1(702)595-2188 Skype: thegeneralmills IGN: GeneralMills (NA/OCE/LAs/BR), RiotGeneral(EUN/EUW) [image: Description: Description: Description: Description: cid:image003.png@01CCBFC7.77B37AF0] www.riotgames.com www.leagueoflegends.com

1 0

overall_traffic on front page, showing peering when peering is disabled.
by Matt Ladewig 05 Mar '14

05 Mar '14

I have transit, customer, and core traffic interfaces descriptions setup and working. No peering interfaces have been defined. Peering interfaces menu items are disabled with $config['int_peering'] = 0; However, when overall_traffic is added to the $config['frontpage']['order'] array, "Overall Peering Traffic Today" and "Overall Transit & Peering Traffic This Month" headers are displayed with broken image placeholders that link back to the url/iftype/type=peering/ and url/iftype/type=peering%2Ctransit/ respectively. Not a big issue, but from a consistency standpoint, it would make sense to disable the overall peering traffic views if $config['int_peering'] = 0; is set. Matt

1 0

mysqld.sock error?
by Luis Quintana 05 Mar '14

05 Mar '14

I have been recently seeing this error pop up, whenever trying to login to my observium instance, and was wondering if anyone had experienced this before. This is an install I did back around October of 2013 and other then expanding the hdd, a month or so ago, I havent really messed with the settings (the first time i saw this was about a week and a half ago or so). After searching on google a little bit, it seems like the socket trying to be leveraged is at location '/var/run/mysqld/mysqld.sock' yet when i do a search for '-type s', i only see '/run/mysqld/mysqld.sock'. The '/etc/mysql/my.cnf' file already lists "socket = /var/run/mysqld/mysqld.sock" though. Should I just modify the my.cnf file to include '/run/mysqld/mysqld.sock'? This is the error I get: MySQL Error: Can't connect to local MySQL server through socket '/var/run/mysqld/mysqld.sock' (111)

2 2

observium not showing mac addressses Cisco Switch WS-C3750X-48P-S
by techuser6＠gmail.com 05 Mar '14

05 Mar '14

Problem: I have a Cisco Switch that is not showing the MAC addresses in Observium. I have configured SNMP as according to the IPV4 instructions on the main observium website. My other Cisco devices are showing MAC address information fine. I can do a show mac address-table and everything appears when SSH into the switch. Can someone please advise what I am missing or how to get observium to start showing the MAC addresses of this device? Model number : WS-C3750X-48P-S * 1 54 WS-C3750X-48P 12.2(55)SE C3750E-UNIVERSALK9-M Thanks

1 0

Observium as inventory mgmt?
by Daniel Kasen 05 Mar '14

05 Mar '14

Hello all, I've been playing around for the last week and want to say really nice work thus far. But I was wondering if anyone is using this as an inventory system that would be comparable to racktables? Basically allow the user to create a table with software versions acquired through the Unix agent module (not the rpm plugin as this ignores tar installs). From everything I've seen so far it looks like this is more focused on adding custom graphs and not simple text. Have I missed something obvious here, or is this an improper use of the tool on my part? *Daniel Kasen | Data Center Operations Engineer*

1 0

Storage alerts
by Johnathon Voegeli 05 Mar '14

05 Mar '14

Is it possible to create an alert based on storage % yet? I've tried several ways and failed in a fiery crash. -JV

2 4

Port tracking issue with IPv6
by Maxence BITTERLI 05 Mar '14

05 Mar '14

Hi, On some machines (debian 6 & 7) I don't have any output of my bandwidth. Port information are correct, I can see correct MAC and all IP address associated to this port but my graph are empty. Poller output for eth0 : [ifIndex] => 4 [ifDescr] => eth0 [ifType] => ethernetCsmacd [ifMtu] => 1500 [ifSpeed] => 1000000000 [ifPhysAddress] => 8:x0:xe:xc:ex:xe [ifAdminStatus] => up [ifOperStatus] => up [ifLastChange] => 0:0:00:00.00 [ifInOctets] => 529940242 [ifInUcastPkts] => 225555807 [ifInNUcastPkts] => 0 [ifInDiscards] => 0 [ifInErrors] => 0 [ifInUnknownProtos] => 0 [ifOutOctets] => 1075923292 [ifOutUcastPkts] => 280183099 [ifOutNUcastPkts] => 0 [ifOutDiscards] => 0 [ifOutErrors] => 0 [ifOutQLen] => 0 [ifSpecific] => zeroDotZero [ifName] => eth0 [ifInMulticastPkts] => 0 [ifInBroadcastPkts] => 0 [ifOutMulticastPkts] => 0 [ifOutBroadcastPkts] => 0 [ifHCInOctets] => 56364515090 [ifHCInUcastPkts] => 225555807 [ifHCInMulticastPkts] => 0 [ifHCInBroadcastPkts] => 0 [ifHCOutOctets] => 275953830236 [ifHCOutUcastPkts] => 280183099 [ifHCOutMulticastPkts] => 0 [ifHCOutBroadcastPkts] => 0 [ifHighSpeed] => 1000 [ifPromiscuousMode] => false [ifConnectorPresent] => true [ifAlias] => [ifCounterDiscontinuityTime] => 0:0:00:00.00 Linux 3.10.9-xxxx-grs-ipv6-64 (Debian 7) This interface support IPv4 & IPv6 and I actually have some traffic on it. At first I thougth it was a probleme with IPv4 + v6 but I also got an old machine with IPv4 only and this machine got empty graph too. Any idea to solve this ? Maxence

2 1

please unsubscribe my account
by Rendani Nenzhelele 05 Mar '14

05 Mar '14

[Description: Description: Description: Description: Description: cid:image001.jpg@01CC34B8.41502520] Rendani Nenzhelele Network Administrator Small Enterprise Finance Agency (sefa) Tel: 012 748 9717 Cell: 078 888 1588 [cid:image003.jpg@01CEF4CF.A72E4C80] Eco Fusion 5, Block D, 1004 Teak Close, Witch-Hazel Avenue ,Eco Park, Centurion, www.sefa.org.za<http://www.sefa.org.za> At present, the integrity of e-mail across the Internet cannot be guaranteed and messages sent via this medium are potentially at risk. The recipient should scan any attached files for viruses. All liability arising as a result of the use of this medium to transmit information by or to sefa (Small Enterprise Finance Agency) is excluded to the extent permitted by law. The information in this e-mail and in any attached files is CONFIDENTIAL and is legally privileged from disclosure and unauthorised use. It is intended solely for the addressee. If you have received this message in error, please return it to the sender and then delete the email and destroy all copies of it. If you are not the intended recipient, any form of reproduction, dissemination, copying, disclosure, modification, distribution and/or publication of, or any unauthorised action taken in relation to this message or its attachments is prohibited and may be unlawful and an infringement of copyright.

2 1

App Bind - No rrd file
by Maxence BITTERLI 05 Mar '14

05 Mar '14

Hi, I enabled bind apps on 2 servers but actually I got no rrd file on my observium server but on the web interface I can see both of them with pic embed but corrupted. Any clue ? Where should I check to try to debug it ? If I try telnet localhost 36602, I can see <<<app-bind-0>>> And I got an output of 1185 lines for this apps, maybe my results is too long ? Thanks for your help :) Maxence

1 0

Re: [Observium] Storage alerts
by Adam Armstrong 05 Mar '14

05 Mar '14

2 1

Brocade VDX Support?
by Aaron Mayfield 05 Mar '14

05 Mar '14

I notice my Brocade routers seem to work fine in Observium. What about VDX switches? Does anyone know if Observium can work with these? Currently evaluating switches for our network, and would like to know if this would be a possible issue... Thanks

3 3

Help - Syslog-NG
by Hardcastle, Iain (CBC - Hamilton) 04 Mar '14

04 Mar '14

Hi all, I have an observium system running quite happily. I've tried to integrate the syslogging functionality but getting strange results. Not sure whether the problem lies with syslog-ng, PHP or the sucking of data into Observium. Let me explain: With syslog-ng started in foreground mode 'syslog-ng -Fevd' everything works as expected. I see syslog packets coming in via tcpdump, I see the log flash up on the terminal and it correctly routes into the right part of the Observium front end. With syslog-ng started as a daemon (the desired config setup), nothing gets to Observium. I can still see the syslog packets in tcpdump obviously but I'm blind as to what happens to the messages after that. One thing I have noticed is that when running syslog-ng in foreground mode, I see "Starting destination program; cmdline='/opt/observium/syslog.php'" in the startup messages and a corresponding process in the ps -lax output "php /opt/observium/syslog.php" With syslog-ng started as a daemon, I do not see this php process. Bit stuck as to where to look next. Has anyone seen this behavior before? Centos6.5 and standard packages and configs. System works great otherwise/ Cheers iain Deloitte refers to one or more of Deloitte Touche Tohmatsu Limited, a UK private company limited by guarantee, and its network of member firms, each of which is a legally separate and independent entity. Please see http://www.deloitte.com/about for a detailed description of the legal structure of Deloitte Touche Tohmatsu Limited and its member firms.

1 0

How to disable the "Overall Peering" graph?
by Shane O'Brien 04 Mar '14

04 Mar '14

Hello! We are experiencing an issue where we currently have no peering traffic and our Overall Peering graph on our Observium landing page is broken. We'd like to remove it, but when we select the option to not display broken graphs. It removes all of our graphs and not just the single broken one. Any guidance or assistance is appreciated. -Shane

1 0

App Bind - No rrd file
by Maxence BITTERLI 04 Mar '14

04 Mar '14

Hi, I enabled bind apps on 2 servers but actually I got no rrd file on my observium server but on the web interface I can see both of them with pic embed but corrupted. Any clue ? Where should I check to try to debug it ? If I try telnet localhost 36602, I can see <<<app-bind-0>>> And I got 1185 lines for this apps, maybe my results is too long ? Maxence

1 0

change port name/description?
by Tom De Puysseleyr 04 Mar '14

04 Mar '14

Hi again, SNMP traps are working (thanks to the wiki), so now I can see nearly immediately when a port on a switch goes down. However, something like "Nortel Networks BayStack 5510-24T Ethernet Switch Module - Unit 1 Port 1" doesn't say much about what exactly went down. Just an idea: would it be possible to provide a way to edit the port names? Mvg, Tom De Puysseleyr Afdeling Informatica T +32 (0) 15 565 238 F +32 (0) 15 565 240 www.belorta.be Please consider the environment before printing this e-mail

5 5

Mempool updates every 6 hours?
by Matt Ladewig 01 Mar '14

01 Mar '14

This started on the 27th, on my hp gear. I believe I went from 5019 to 5050 around that time. Now at 5058. >From the event log from one device. All HP procurves showing the same. 2014-02-28 12:33:09 Mempool Memory pool updated: type hpGlobal, index 1, descr Global Memory 1 2014-02-28 12:33:09 Mempool Memory pool updated: type hpLocal, index 1, descr Local Memory 1 2014-02-28 06:33:10 Mempool Memory pool updated: type hpGlobal, index 1, descr Global Memory 1 2014-02-28 06:33:10 Mempool Memory pool updated: type hpLocal, index 1, descr Local Memory 1 2014-02-28 00:33:09 Mempool Memory pool updated: type hpGlobal, index 1, descr Global Memory 1 2014-02-28 00:33:09 Mempool Memory pool updated: type hpLocal, index 1, descr Local Memory 1 2014-02-27 18:33:09 Mempool Memory pool updated: type hpGlobal, index 1, descr Global Memory 1 2014-02-27 18:33:09 Mempool Memory pool updated: type hpLocal, index 1, descr Local Memory 1 2014-02-27 12:33:10 Mempool Memory pool updated: type hpGlobal, index 1, descr Global Memory 1 2014-02-27 12:33:10 Mempool Memory pool updated: type hpLocal, index 1, descr Local Memory 1 2014-02-27 06:33:09 Mempool Memory pool updated: type hpGlobal, index 1, descr Global Memory 1 2014-02-27 06:33:09 Mempool Memory pool updated: type hpLocal, index 1, descr Local Memory 1 2014-02-27 00:33:09 Mempool Memory pool updated: type hpGlobal, index 1, descr Global Memory 1 2014-02-27 00:33:09 Mempool Memory pool updated: type hpLocal, index 1, descr Local Memory 1

2 2

Vyatta snmpd errors in ports module
by Robert Williams 01 Mar '14

01 Mar '14

Hi, On the latest version of Vyatta (6.6 R1) we are getting these errors for every physical port on every poller run: snmpd[3872]: access:dot3StatsTable,interface_ioctl_dot3Stats_get, cannot get stats information for interface |eth5| snmpd[3872]: access:dot3StatsTable,interface_ioctl_dot3Stats_get, cannot get stats information for interface |eth0| snmpd[3872]: access:dot3StatsTable,interface_ioctl_dot3Stats_get, cannot get stats information for interface |eth3| snmpd[3872]: access:dot3StatsTable,interface_ioctl_dot3Stats_get, cannot get stats information for interface |eth2| snmpd[3872]: access:dot3StatsTable,interface_ioctl_dot3Stats_get, cannot get stats information for interface |eth4| snmpd[3872]: access:dot3StatsTable,interface_ioctl_dot3Stats_get, cannot get stats information for interface |eth1| However everything on the graphs looks fine. I’ve tracked it down to the ports module, which when run by itself causes the errors on the Vyatta box: (The stats are low because it’s not actually in production and only eth4 and eth4.497 are link-up) router.name 311 vyatta (unix) Uptime: 4h 23m 4s Module time: 0.0684s Hardware: Version: Features: VC6.6R1 Serial: Asset: Module time: 0.0132s Caching Oids: ifEntry ifXEntry dot3StatsDuplexStatus Port Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller(2) replacing with 64-bit...VLAN == bps(0bps/0bps)bytes(0B/0B)pkts(0pps/0pps) Checking alerts Port Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller(3) replacing with 64-bit...VLAN == bps(0bps/0bps)bytes(0B/0B)pkts(0pps/0pps) Checking alerts Port Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller(4) replacing with 64-bit...VLAN == bps(0bps/0bps)bytes(0B/0B)pkts(0pps/0pps) Checking alerts Port Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller(5) replacing with 64-bit...VLAN == bps(0bps/0bps)bytes(0B/0B)pkts(0pps/0pps) Checking alerts Port Intel Corporation 82574L Gigabit Network Connection(6) replacing with 64-bit...VLAN == bps(20.6kbps/13.8kbps)bytes(58kB/38.9kB)pkts(12.9pps/13.0pps) Checking alerts Port Intel Corporation 82574L Gigabit Network Connection(7) replacing with 64-bit...VLAN == bps(0bps/0bps)bytes(0B/0B)pkts(0pps/0pps) Checking alerts Port eth4.497(8) replacing with 64-bit...VLAN == bps(18.3kbps/13.0kbps)bytes(51.5kB/36.5kB)pkts(12.9pps/13.0pps) Checking alerts Module time: 0.3932s Polled in 0.5376 seconds Now this doesn’t occur when polling Vyatta 6.5 R1 so I appreciate it’s probably something which has changed in the Vyatta (or it is now logging something which previously it has ignored). However, to stand a hope of getting it sorted I wondered if anyone could suggest what part of the ‘ports’ module could possibly cause an error like this in the snmpd of the Vyatta? Then I can try to take it up on the Vyatta forums, but at the moment I can’t even explain which I’m trying to poll when the error occurs because I don’t know what steps in the ports module are likely to cause this. Any suggestions / pointers welcome! Robert Williams Custodian Data Centre Email: Robert(a)CustodianDC.com http://www.CustodianDC.com

2 3

Frontpage settings
by Scott Brawner 28 Feb '14

28 Feb '14

What are all the web pieces you can put on the front page? I'd like to see what's in the /alerts/ page on the front page in the manner it's displayed on the /alerts/page. Possible? Best regards, Scott Brawner IS Manager - Infrastructure Kratos Defense and Security Solutions, Inc. o. 843-308-2364 m. 843-814-3912 Description: cid:image002.jpg@01CBD278.0CADB410 For every complex problem, there is a solution that is simple, neat, and wrong. -- H. L. Mencken

2 3

inline images
by Rob VanHooren 28 Feb '14

28 Feb '14

consider, is there a way to adjust the construction of alert messages so images can be attached rather than inline. then, add a config.php lever to toggle between inline vs. attached. takes care of those environments where netadmin has no control over the mail client. just my CAD$0.02 thanks R. Sent from my iPhone > On Feb 28, 2014, at 13:39, observium-request(a)observium.org wrote: > > Send observium mailing list submissions to > observium(a)observium.org > > To subscribe or unsubscribe via the World Wide Web, visit > http://postman.memetic.org/cgi-bin/mailman/listinfo/observium > or, via email, send a message with subject or body 'help' to > observium-request(a)observium.org > > You can reach the person managing the list at > observium-owner(a)observium.org > > When replying, please edit your Subject line so it is more specific > than "Re: Contents of observium digest..." > > > Today's Topics: > > 1. Re: Email alerts - supposed to have rrd images? (Scott Brawner) > 2. Re: Email alerts - supposed to have rrd images? (Tom Laermans) > > > ---------------------------------------------------------------------- > > Message: 1 > Date: Fri, 28 Feb 2014 18:19:20 +0000 > From: Scott Brawner <Scott.Brawner(a)kratosdefense.com> > To: Observium Network Observation System <observium(a)observium.org> > Subject: Re: [Observium] Email alerts - supposed to have rrd images? > Message-ID: > <921F9F8F3697FD4BB023C0963EE7073A1E83A6FD(a)SD-MB02.wfinet.com> > Content-Type: text/plain; charset="us-ascii" > > How do we get this working for Outlook. > > > > Thanks, > Scott Brawner > Description: cid:image002.jpg@01CBD278.0CADB410 > > > > From: observium [mailto:observium-bounces@observium.org] On Behalf Of Tom > Laermans > Sent: Saturday, February 15, 2014 4:22 AM > To: Observium Network Observation System > Subject: Re: [Observium] Email alerts - supposed to have rrd images? > > > > Hi, > > The image is included in the html you posted. It's an inline image, not all > e-mail clients (notably Outlook) support this format. > > Tom > > On 15/02/2014 06:48, Matt Ladewig wrote: > > All - > > > > When I receive an alert based on an alerting check, I get a box at the > bottom of the alert that looks like images are supposed to be included, but > they aren't able to resolve. Checking the email's html, there isn't a url > included with the listed images. The html is attached. Any insight would be > appreciated - > > > > Thanks, > > Matt > > > > > > > > > > > > > _______________________________________________ > observium mailing list > observium(a)observium.org > http://postman.memetic.org/cgi-bin/mailman/listinfo/observium > > > >

1 0

Email alerts - supposed to have rrd images?
by Matt Ladewig 28 Feb '14

28 Feb '14

All - When I receive an alert based on an alerting check, I get a box at the bottom of the alert that looks like images are supposed to be included, but they aren't able to resolve. Checking the email's html, there isn't a url included with the listed images. The html is attached. Any insight would be appreciated - Thanks, Matt

5 8

Moving config to a fresh install
by Scott Brawner 28 Feb '14

28 Feb '14

How hard is it to move/copy the Observium config to a newly built machine? Best regards, Scott Brawner IS Manager - Infrastructure Kratos Defense and Security Solutions, Inc. o. 843-308-2364 m. 843-814-3912 Description: cid:image002.jpg@01CBD278.0CADB410 For every complex problem, there is a solution that is simple, neat, and wrong. -- H. L. Mencken

7 8

Observium Graph Issue . Draw Error .
by Andrei Stana 28 Feb '14

28 Feb '14

Hello everyone , I have a problem regarding the drawing of the graph in observium . Snmpd is running , rrdcached is running . When i run : root@host:/opt/observium# ./poller.php -h all -d i saw that a receive some lines with the following error : [ERROR: rrdcached: Permission denied ] The rrdcached daemon is running like this : root@host:/opt/observium# ps fax | grep rrdcached 26356 pts/0 S+ 0:00 | \_ grep --color=auto rrdcached 15833 ? Ssl 0:01 /usr/bin/rrdcached -l unix:/var/run/rrdcached.sock -j /var/lib/rrdcached/journal/ -F -b /var/lib/rrdcached/db -B / -p /var/run/rrdcached.pid if i go and edit the rrdcached and remove -B option and then i restart de rrdcached service i do not get anymore ERROR after i run ./poller.php -h all -d . Suggetions anyone ? Multumesc. Andrei. Andrei Stana Team Leader 3G RAN Pitesti Rcs & Rds Pitesti http://www.rcs-rds.ro Office : 0348-400425 Vodafone : 0720-956507 Digi.Mobil : 0770 048196 Digi.Oriunde: 0770048196 ---------------------------------------------------------------------- Privileged/Confidential Information may be contained in this message. If you are not the addressee indicated in this message (or responsible for delivery of the message to such person), you may not copy or deliver this message to anyone. In such a case, you should destroy this message and kindly notify the sender by reply e-mail. ----------------------------------------------------------------------

5 8

localhost:36602 failed
by Andrei Stana 28 Feb '14

28 Feb '14

Hello , I have a problem with the connexion on the localhost via port 36602 . What i am trying to do is to generate graphs for postfix , mysql and apache. I follow the instructions from observium.org/wiki regarding the unix-agent. I still receiving the following ERROR in poller.php root@host:/opt/observium# tail -f /opt/observium/observium.log Connection to UNIX agent on tcp://localhost:36602 failed. ERROR: 111 Connection refused Connection to UNIX agent on tcp://localhost:6556 failed. ERROR: 111 Connection refused Any suggestion !? Andrei Stana Rcs & Rds Pitesti http://www.rcs-rds.ro Office : 0348-400425 Vodafone : 0720-956507 Digi.Mobil : 0770 048196 Digi.Oriunde: 0770048196 ---------------------------------------------------------------------- Privileged/Confidential Information may be contained in this message. If you are not the addressee indicated in this message (or responsible for delivery of the message to such person), you may not copy or deliver this message to anyone. In such a case, you should destroy this message and kindly notify the sender by reply e-mail. ----------------------------------------------------------------------

2 4

half duplex ethernet alert?
by Matt Ladewig 28 Feb '14

28 Feb '14

Could ifDuplex be added as an checker metric? We'd like to setup an alert to keep an eye on this for us, but currently ifDuplex doesn't return a value in the array. It would be very helpful if it could be added. Thanks, Matt [cid:image001.png@01CF33AE.2D30C250]

2 2

"Mempool" noise in event logs...
by Michael Loftis 27 Feb '14

27 Feb '14

Is there any way to get the current noise in the event logs from mempool away? Basically every time discovery is run/rerun I get spurious "updated" events for everything. Cisco, Juniper, Dell PowerConnect, and I think Linux, all effected. 2014-02-27 17:08:51sea-1810-c4-c6506MempoolMemory pool updated: type cemp, index 2001.1, descr CPU of Module 3 - Processor 2014-02-27 17:08:51sea-1810-c4-c6506MempoolMemory pool updated: type cemp, index 1001.1, descr CPU of Module 1 - Processor 2014-02-27 17:08:21c3mx.seaMempoolMemory pool updated: type junos, index 9.2.0.0, descr Routing Engine 1 2014-02-27 17:08:21c3mx.seaMempoolMemory pool updated: type junos, index 9.1.0.0, descr Routing Engine 0 2014-02-27 17:08:21c3mx.seaMempoolMemory pool updated: type junos, index 7.11.0.0, descr FPC: DPC 4x 10GE R @ 10/*/* -- "Genius might be described as a supreme capacity for getting its possessors into trouble of all kinds." -- Samuel Butler

2 1

Juniper Optical Interface Diagnostics
by Peter Smith 27 Feb '14

27 Feb '14

Hi, I have subscribed and installed the stable version of Observium using SVN. I would like to know if there is an option to turn on optical diagnostic information for Juniper network devices as the current graphs do not show this. I am mostly interested in TX and RX power levels. This information is available via snmp. I have currently added EX4500 and EX4550 switches to the monitoring. Thanks, Peter

5 5

Juniper Optical Interface Diagnostics
by Chris Wopat 27 Feb '14

27 Feb '14

> From: Peter Smith <helsvell(a)gmail.com> > To: observium(a)observium.org > Subject: [Observium] Juniper Optical Interface Diagnostics > Message-ID: > <CAHmLRvVGX_4d0bWwqBGQBQT6sf_K_CprBN9JiL2EBMhH7Fx3WA(a)mail.gmail.com> > Content-Type: text/plain; charset="iso-8859-1" > > Hi, > > I have subscribed and installed the stable version of Observium using SVN. > I would like to know if there is an option to turn on optical diagnostic > information for Juniper network devices as the current graphs do not show > this. I am mostly interested in TX and RX power levels. This information > is available via snmp. I have currently added EX4500 and EX4550 switches > to the monitoring. What OID are you using? When I tried this last (a year ago, ex4500) the data was not available via SNMP without extra scripts installed on the device. This may have been a limitation of my using SFP and not SFP+ on the device however. --Chris

1 0

Memory usage on ASR9k
by Robert Williams 27 Feb '14

27 Feb '14

Hi, This might be my lack of understanding of the memory pools' representations in Observium, or it might be a bug. There seems to be a significant difference in the memory being reported by Observium and that which is reported by the device. Here is the console output for the two processors (SP and RSP) along with the graph values from Observium: #sh mem sum location 0/0/CPU0 Physical Memory: 8192M total Application Memory : 8004M (5264M available) <- approx. 34% used Image: 59M (bootram: 59M) Reserved: 128M, IOMem: 0, flashfsys: 0 Total shared window: 347M #sh mem sum location 0/RSP0/CPU0 Physical Memory: 8192M total (4688M available) <- approx. 41% used Application Memory : 8002M (4688M available) Image: 61M (bootram: 61M) Reserved: 128M, IOMem: 0, flashfsys: 0 Total shared window: 133M The "Reserved" and "Image" ones are always 100% - but that's a different issue I think. What I'm more interested in is the RSP and SP "Processor" element, which both show very different amounts to the real usage. In fact, I can't even remotely line them up with anything on the box itself. So, any ideas or am I just reading this all wrong? Cheers! Robert Williams Custodian Data Centre Email: Robert(a)CustodianDC.com http://www.CustodianDC.com

6 25

Customers configuration
by Scott Brawner 27 Feb '14

27 Feb '14

How do you add customers and assign bills to them Best regards, Scott Brawner IS Manager - Infrastructure Kratos Defense and Security Solutions, Inc. o. 843-308-2364 m. 843-814-3912 Description: cid:image002.jpg@01CBD278.0CADB410 For every complex problem, there is a solution that is simple, neat, and wrong. -- H. L. Mencken

2 1

AD auth
by John P Arends 26 Feb '14

26 Feb '14

AD authentication isn’t working for me and I’d like to look at some logs to try to figure out what might be going wrong, but I cant figure out where to look. Any suggestions?

2 1

Viewing Mac addresses known on each device/vlan/port?
by Damien Gardner 26 Feb '14

26 Feb '14

Hi Folks, Sorry if this has been asked before, google wasn't helping much. Does Observium have the ability to tell me what MAC Addresses have been learnt on any given device, or preferably ports on a device? I was about to go write some php code to find a missing IPMI device via SNMP queries, and one of my coworkers suggested seeing if we can find it from Observium already? Thanks, Damien -- Damien Gardner Jnr Level 3 Systems Admin Office Address: 2/2 Teamster Close, Tuggerah NSW 2259 Postal Address: PO Box 3187, Tuggerah NSW 2259 Direct: | Network Ops: +61 2 8115 8850 | Main Switch: +61 2 8115 8888 Web: www.serversaustralia.com.au

1 0

Alert Checker if SNMP oid | Dell Power
by Guilherme de Freitas Figueiredo 25 Feb '14

25 Feb '14

Hi! there is some form to create some alert using a specifc SNMP oid? I say this because I'm trying to create an alert for a Dell switch in which it alarms if one of the sources of power is turned off, the SNMP oid is the SNMPv2-SMI :: enterprises.674.10895.3000.1.2.110.7.2.1.3.11 already in observium envMonSupplyState.11 is apparently the same has to be greater than 1, so I already tried the following: envMonSupplyState.11 gt 1 and SNMPv2-SMI :: enterprises.674.10895.3000.1.2.110.7.2.1.3.11 gt 1 []s! -- Guilherme de Freitas Figueiredo

3 5

Re: [Observium] Weirdness with a site with 32-bit ports
by Scott Brawner 25 Feb '14

25 Feb '14

This is happening with all my 1921 routers, all started on the 5th or 6th. Help? Thanks, Scott Brawner Description: cid:image002.jpg@01CBD278.0CADB410 From: Scott Brawner Sent: Tuesday, February 25, 2014 10:57 AM To: observium(a)observium.org Subject: Weirdness with a site with 32-bit ports I am going through the sites and I noticed that on the overview page that nothing is showing in the traffic graph for one of our sites. Best regards, Scott Brawner IS Manager - Infrastructure Kratos Defense and Security Solutions, Inc. o. 843-308-2364 m. 843-814-3912 Description: cid:image002.jpg@01CBD278.0CADB410 For every complex problem, there is a solution that is simple, neat, and wrong. -- H. L. Mencken

3 5

Weirdness with a site with 32-bit ports
by Scott Brawner 25 Feb '14

25 Feb '14

I am going through the sites and I noticed that on the overview page that nothing is showing in the traffic graph for one of our sites. But when I look at the ports themselves, they are showing traffic: Then when I go into port config, I see this: It looks like it stopped showing traffic on the 5th or 6th. Any ideas? Best regards, Scott Brawner IS Manager - Infrastructure Kratos Defense and Security Solutions, Inc. o. 843-308-2364 m. 843-814-3912 Description: cid:image002.jpg@01CBD278.0CADB410 For every complex problem, there is a solution that is simple, neat, and wrong. -- H. L. Mencken

1 0

IPMI values from server running VMWare
by Niclas Tollgård 25 Feb '14

25 Feb '14

Until recently I've been able to retrieve values using IPMI on my servers running ESXi. This option now seems to have been removed? It's still available for my servers running Linux but not ESXi. Any specific reason for this? Is it something I can turn back on again? I'm thinking it's a "hardware" thing and not dependant on the OS it's running. Regards, Nic

2 1

Mailing alert system
by tech8.otelafrica 25 Feb '14

25 Feb '14

Hey guys, Could you assist as to how we can set up alerts. I pretty much want the system to send an email when a device goes down. How would I go about setting this up? Regards Anton

4 9

New alerts
by Johnathon Voegeli 25 Feb '14

25 Feb '14

I am awful at using this new alerting system. Can someone give me a hint on how to setup a temperature alert? Just the basics and I'll work from there. -JV

2 3

Re: [Observium] LDAP Auth not able to use level 10
by Jeff Courtade 24 Feb '14

24 Feb '14

Use the hostname ui.tadj1.adjuggler.net. -- Thanks, Jeff Courtade Director of Systems Engineering Adjuggler Inc http://www.adjuggler.com M: 240.507.6116 -------- Original message -------- From: Tom Laermans <tom.laermans(a)powersource.cx> Date:02/20/2014 5:47 PM (GMT-05:00) To: Observium Network Observation System <observium(a)observium.org> Subject: Re: [Observium] LDAP Auth not able to use level 10 Hi Rutger, The problem has been seen here on the list a few times already, but unfortunately I can't replicate it. :[ I presume access to your Observium install is out of the question? Tom On 20/02/2014 20:29, Rutger Truyers wrote: Hi, I've set up the ldap authentication with AD. The LDAP binding , Search and Authentication is all succesfull. even the group matching is perfect. But I'm not able to provide the group a level 10 authentication. When authenticating the user in the correct group can't see any device. Greetings. _______________________________________________ observium mailing list observium(a)observium.org http://postman.memetic.org/cgi-bin/mailman/listinfo/observium

3 4

Re: [Observium] Classifying port types
by Scott Brawner 24 Feb '14

24 Feb '14

As an aside, it would be awesome to be able to assign port roles via the web interface instead of depending on the snmp attribute. Thanks, Scott Brawner Description: cid:image002.jpg@01CBD278.0CADB410 From: Scott Brawner Sent: Monday, February 24, 2014 11:45 AM To: observium(a)observium.org Subject: Classifying port types I still can't get the classified port types (transit/peering/customer) to work properly. The main graph on the home page works but when I click the link, I get Total Graph for ports of type : Transit None found. Same with Peering. I have the text 'transit' and/or 'peering' in the description for the ports. It appears to be sort of working. just would like that drill down to work. Best regards, Scott Brawner IS Manager - Infrastructure Kratos Defense and Security Solutions, Inc. o. 843-308-2364 m. 843-814-3912 Description: cid:image002.jpg@01CBD278.0CADB410 For every complex problem, there is a solution that is simple, neat, and wrong. -- H. L. Mencken

2 2

Classifying port types
by Scott Brawner 24 Feb '14

24 Feb '14

I still can't get the classified port types (transit/peering/customer) to work properly. The main graph on the home page works but when I click the link, I get Total Graph for ports of type : Transit None found. Same with Peering. I have the text 'transit' and/or 'peering' in the description for the ports. It appears to be sort of working. just would like that drill down to work. Best regards, Scott Brawner IS Manager - Infrastructure Kratos Defense and Security Solutions, Inc. o. 843-308-2364 m. 843-814-3912 Description: cid:image002.jpg@01CBD278.0CADB410 For every complex problem, there is a solution that is simple, neat, and wrong. -- H. L. Mencken

1 0

MRV LX console servers
by Rutger Bevaart 24 Feb '14

24 Feb '14

Hello list, I have a couple of MRV LX4000 console servers that I added to Observium. I do not care much about port utilisation but it is nice to know if one drops off the radar and get an alert. However, the boxes are not recognised by Observium and get this ugly question mark icon in the device list. A quick Google did not reveal anything related to these boxes and Observium, did anyone play around with adding these devices and get them recognised properly? They basically run a BusyBox Linux... Regards, Rutger

2 1

strange numbers from nortel switch
by Tom De Puysseleyr 24 Feb '14

24 Feb '14

Hi I'm trying to setup Observium to poll all of our switches, and so far I just love it. Great job guys! I hope to convince the management to subscribe soon, but for now we'll have to do with the community version. Let me try to explain my issue. I am polling a dual stack of Nortel Baystack 5510-24T switches using snmp v2c. All ports of unit 1 and ports 1 - 6 of unit 2 look fine. The graphics (bits/sec) for port 7 to 24 of unit 2 are strange though. Port 7 is not used, no device is connected to it at all. The average traffic according to the graphs is around 30Gbit/s. All other ports after port 7 show the exact same numbers. So first I tried to reset all port statistics on the switch. The graphs showed 0 bits/s for a few minutes, but then after let's say 30 minutes it shows a current bandwidth of 8Gbit/s. I tried deleting the device from Observium and added it again, but it seems that all counters are still there. When I look at the port using telnet, all counters are 0. I know that this switch is not in the supported devices list, but as far as I know the default snmp pollings should provide correct numbers for bandwidth statistics, no? Any help is greatly appreciated! Regards, Tom De Puysseleyr

3 4

Adding Bind9 stats into Observium for trending/graphing?
by Ricardo M Meleschi 23 Feb '14

23 Feb '14

Hello, I do not see a away to search the mailing list so please excuse me if this question has been asked before. I've recently (as in the last 3 or 4 days) began configuring Observium for the purpose of getting some good trending data out of my bind servers. I noticed in the demo, there is an APP drop down, and BIND is listed as one of the supported applications. I am having a difficult time figuring out how to get Observium to monitor my bind servers however. I do get LOTS of great throughput data and cpu usage so that will be very helpful. I have installed the bind9-snmp setup from bayour.com and am abe to read bind statistics using SNMP, but I have no idea how to get these values to be polled and graphed by Observium. If setting up the bind9-stats through SNMP is not the proper way to graph the bind stats, can someone please point me in the right direction? Thanks, Ricardo Meleschi

4 4

Need help getting the new alert system to send mail
by Thomas Raabo - Zitcom A/S 22 Feb '14

22 Feb '14

It never sends and i dont see anything in the email log. //Alert $config['alerts']['alerter']['default']['descr'] = "Observium Email Alert"; $config['alerts']['alerter']['default']['type'] = "email"; $config['alerts']['alerter']['default']['contact'] = "tr(a)zitcom.dk<mailto:tr@zitcom.dk>"; $config['alerts']['alerter']['default']['enable'] = TRUE; No emails are send on alerts So I tried to change the email backend $config['email_backend'] = 'sendmail'; That did not help. So I did a test to check the php mail module. <?php $to = "tr(a)zitcom.dk<mailto:tr@zitcom.dk>"; $subject = "Test mail"; $message = "Hello! This is a simple email message."; $from = "test(a)mgmt3.network.zitcom.dk<mailto:test@mgmt3.network.zitcom.dk>"; $headers = "From:" . $from; mail($to,$subject,$message,$headers); echo "Mail Sent."; ?> And that worked fine. What is the problem? I have an alert in Observium ☺ [cid:image001.png@01CF1D04.808888E0] Med venlig hilsen | Best regards Thomas Raabo Netværksansvarlig CCIE #33466 Zitcom A/S Telefon: 70 40 00 00 E-mail: kontakt(a)zitcom.dk<mailto:kontakt@zitcom.dk> Direkte: 69 10 60 18 Direkte: tr(a)zitcom.dk<mailto:tr@zitcom.dk> [cid:image005.jpg@01CEDC86.E897E480]<http://www.zitcom.dk/>

6 12

Re: [Observium] strange numbers from nortel switch
by Tom De Puysseleyr 21 Feb '14

21 Feb '14

Hmm, at the moment the numbers are 0 again, so maybe I was complaining too soon... Regards, Tom De Puysseleyr

1 0

Re: [Observium] Enable Google Map
by Maxence BITTERLI 21 Feb '14

21 Feb '14

is it possible to get the config.php of http://demo.observium.org/ ? Thanks, Max Maxence Bitterli maxence(a)definima.com 05 56 89 14 04 2014-02-20 15:01 GMT+01:00 Maxence Bitterli <maxence(a)definima.com>: > Hello, > > I'm trying to enable the google map like on live demo exemple but I > found few documention about it. > Actually I found some information on Observium Wiki : > http://www.observium.org/wiki/Configuration_Options#Geocoding_Configuration > > Even if I set : > $config['geocoding']['api'] = 'google'; > > I still got the black&white map. > Any clue ? > > A part of my config.php : > $config['geocoding']['enable'] = true; > $config['geocoding']['api'] = 'google'; > $config['geocoding']['default']['lat'] = "37.7463058"; > $config['geocoding']['default']['lon'] = "-25.6668573"; > $config['frontpage']['map']['region'] = "world"; > $config['frontpage']['map']['resolution'] = "countries"; > $config['frontpage']['map']['dotsize'] = 5; > $config['frontpage']['map']['realworld'] = false; > > Max >

2 1

efficiency in SNMP-requests
by Botens.T＠zdf.de 21 Feb '14

21 Feb '14

Hey everyone, first of all I want to tell you, that I really like observium. It's a great tool and I really enjoy using it. There is one disadvantage, that a colleague of mine from our networking department told me. We get log-Entries in our firewall for each SNMP-request. Would it be possible to do a single SNMP request to get all Data? Is there a config setting? Or is it planned to do this? It would really help, because I had to adjust the interval to a longer time as a first measure. Yours Tobias ZDF Tobias Botens GB IST, IT-Betrieb, Systemmanagement ZDF-Stra?e 1 55100 Mainz Germany Telefon: +49 6131 70-14730 Telefax: +49 6131 70-74730 Handy: E-Mail: Botens.T(a)zdf.de Web: ZDF<http://www.zdf.de/> Mit dem Zweiten sieht man besser P Bitte pr?fen Sie, ob diese Mail wirklich ausgedruckt werden muss!

3 2

LDAP Auth not able to use level 10
by Rutger Truyers 20 Feb '14

20 Feb '14

Hi, I've set up the ldap authentication with AD. The LDAP binding , Search and Authentication is all succesfull. even the group matching is perfect. But I'm not able to provide the group a level 10 authentication. When authenticating the user in the correct group can't see any device. Greetings.

2 1