- observium - lists.observium.org

Auto-authenticate for display graph in Weathermap
by Sébastien 65 20 Feb '22

20 Feb '22

Hello, I use PHP WeatherMAP and use graph display via "/graph.php?height=100&width=512&id=1053&type=port_bits&legend=no" The problem is that I have to be authenticated on Observium to display the content of the graph... How to auto-authenticate ? Thanks for your help.

2 1

Re: [Observium] cli to rebuilt alert checkers
by Tony Guadagno 19 Feb '22

19 Feb '22

Ok, clicking the “rebuild” button on the alert checker interface is not really necessary? It will rebuild every 5 min? Tony From: Adam Armstrong via observium<mailto:observium@observium.org> Sent: Saturday, February 19, 2022 11:38 AM To: Observium<mailto:observium@observium.org> Cc: Adam Armstrong<mailto:adama@observium.org> Subject: Re: [Observium] cli to rebuilt alert checkers It’s done automatically at the end of poller/discovery. Adam. Sent from my iPhone On 19 Feb 2022, at 16:32, Tony Guadagno via observium <observium(a)observium.org> wrote: Hi is there a command to rebuild the alert checkers or can it only be done in the gui? thanks Tony _______________________________________________ observium mailing list observium(a)observium.org http://postman.memetic.org/cgi-bin/mailman/listinfo/observium

1 0

cli to rebuilt alert checkers
by Tony Guadagno 19 Feb '22

19 Feb '22

Hi is there a command to rebuild the alert checkers or can it only be done in the gui? thanks Tony

2 1

monitor by ICMP
by Toky ANDRIANASOLO 18 Feb '22

18 Feb '22

Hello, Is it possible to monitor devices by ICMP, we want to have IP availability of a devices that have no snmp activated Thank you and Regards, Toky

3 4

Re: [Observium] LDAP auth to MS AD with TLS Self Signed Cert
by Tony Guadagno 17 Feb '22

17 Feb '22

Adam, I finally got this working. I have written up a quick guide to making this work, would it be possible for you to put this in your documentation page for LDAP Authentication? I am sure I will loose it if it is not somewhere obvious Directions for enabling LDAP with TLS when connecting to an LDAP server with a self signed certificate or a CA that the Observium server does not recognize Assumptions: you have already enabled SSL/TLS for ldap on your Microsoft Domain Controller (or other LDAP server) Observium is installed on a Fedora flavor of Linux version 7 or 8 (this might work with Ubuntu but i am not sure the commands are the same) Observium is configured for LDAP AND TLS per the authentication documentation page On the Observium server: yum install php-ldap vim /etc/openldap/ldap.conf make sure these 2 config options are commented out #TLS_CACERTDIR /etc/openldap/certs #TLS_CACERT /etc/openldap/certs/cert.crt Add/Change this config option to either hard or allow TLS_REQCERT hard “hard” means that the LDAP server MUST present a cert and the cert must be trustworthy OR in the trusted cert store (this is the more secure method) “allow” mean that the LDAP server MUST present a cert and the cert can be anything...valid or invalid setting to “hard” is better because it prevents an imposter from stealing the ip address of the LDAP server and intercepting the messages from Observium If you are setting TLS_REQCERT to “hard” then take these additional steps: export the LDAP server cert in b64 format with NO KEY place cert of LDAP server in ‘/etc/pki/ca-trust/source/anchors’ folder run ‘update-ca-trust’ as root Tony From: Adam Armstrong via observium<mailto:observium@observium.org> Sent: Wednesday, February 16, 2022 7:29 PM To: 'Observium'<mailto:observium@observium.org> Cc: Adam Armstrong<mailto:adama@observium.org> Subject: Re: [Observium] LDAP auth to MS AD with TLS Self Signed Cert I’ve never used LDAP, so I’m not really sure how this should be done. You can put the putenv stuff in config.php. So long as the variable is set before LDAP tries to start the connection that should be sufficient. Observium doesn’t have any configuration related to this itself. You just need to coax whatever conglomeration of PHP and OpenLDAP code exists into talking to your LDAP server. You might be able to turn of the cert checking by putting “TLS_REQCERT never” into ldap.conf, probably /etc/openldap/ldap.conf or somewhere similar. Adam. From: Tony Guadagno <tonyg(a)guadagno.org> Sent: 16 February 2022 23:55 To: Observium <observium(a)observium.org> Cc: Adam Armstrong <adama(a)observium.org> Subject: RE: [Observium] LDAP auth to MS AD with TLS Self Signed Cert Adam, I have the cert for my AD server, as I said, I am pretty familiar with this process as I use ldap often for application authentication….what I am not very familiar with is php. Other apps have config options to set the paths for the certs etc. What I need help with is where (specifically) to put the config so that Observium will use it. I have the certs, I just need the syntax You mentioned putenv…where would I put that? It must be somewhere in Observium? Thanks for your help Tony From: Adam Armstrong via observium<mailto:observium@observium.org> Sent: Wednesday, February 16, 2022 6:42 PM To: 'Observium'<mailto:observium@observium.org> Cc: Adam Armstrong<mailto:adama@observium.org> Subject: Re: [Observium] LDAP auth to MS AD with TLS Self Signed Cert Whoops: putenv(‘LDAPTLS_CACERT=/path/to/rootca.pem’); Note that this seems to want the CA’s cert, not your server’s cert. Our code doesn’t have any consideration for TLS at all as far as I can see, it should all be transparent to Observium if you get PHP/LDAP into the situation where it accepts your cert. Adam. From: observium <observium-bounces(a)observium.org<mailto:observium-bounces@observium.org>> On Behalf Of Adam Armstrong via observium Sent: 16 February 2022 23:36 To: 'Observium' <observium(a)observium.org<mailto:observium@observium.org>> Cc: Adam Armstrong <adama(a)observium.org<mailto:adama@observium.org>> Subject: Re: [Observium] LDAP auth to MS AD with TLS Self Signed Cert Presumably you need to extract your certs in the correct format and direct the commands to them. The LDAP connection is done by PHP’s LDAP module. You just need to work out how to do it with PHP’s module. It’s probably that you could override this globally with the php.ini rather than putting it in the config.php, too. There seems to be half a dozen solutions for making this work, which isn’t uncommon with infrequently used PHP features. There’s also this: putenv('/path/to/rootca.pem'); Adam. From: Tony Guadagno <tonyg(a)guadagno.org<mailto:tonyg@guadagno.org>> Sent: 16 February 2022 21:57 To: Observium <observium(a)observium.org<mailto:observium@observium.org>> Cc: Adam Armstrong <adama(a)observium.org<mailto:adama@observium.org>> Subject: RE: [Observium] LDAP auth to MS AD with TLS Self Signed Cert Adam, sorry for being dense, but do I just add these two lines directly (as is) to the config.php? ldap_set_option(null, LDAP_OPT_X_TLS_CACERTDIR, '/path/to'); ldap_set_option(null, LDAP_OPT_X_TLS_CACERTFILE, '/path/to/cert.pem'); I tried this with the paths to my certs and it had no affect. Do I need to wrap those command in some other syntax? thanks Tony From: Adam Armstrong via observium<mailto:observium@observium.org> Sent: Wednesday, February 16, 2022 4:25 PM To: 'Observium'<mailto:observium@observium.org> Cc: Adam Armstrong<mailto:adama@observium.org> Subject: Re: [Observium] LDAP auth to MS AD with TLS Self Signed Cert https://andreas.heigl.org/2020/01/31/handle-self-signed-certificates-with-p… I’d assume that getting your cert and putting the two ldap_set_option() commands into config.php should suffice. This seems like a better solution that turning off cert verification. Adam. From: observium <observium-bounces(a)observium.org<mailto:observium-bounces@observium.org>> On Behalf Of Tony Guadagno via observium Sent: 16 February 2022 21:03 To: Observium <observium(a)observium.org<mailto:observium@observium.org>>; Brandon Lund <brandon(a)kansas.net<mailto:brandon@kansas.net>> Cc: Tony Guadagno <tonyg(a)guadagno.org<mailto:tonyg@guadagno.org>> Subject: Re: [Observium] LDAP auth to MS AD with TLS Self Signed Cert I made a packet capture on the Observium server trying to login and if you look, you will see that it is indeed a self signed issue. How do I tell Observium to either trust the cert OR ignore the fact that it is self signed?? [cid:image002.png@01D8240F.9412F790] Tony From: Tony Guadagno via observium<mailto:observium@observium.org> Sent: Wednesday, February 16, 2022 3:27 PM To: Brandon Lund<mailto:brandon@kansas.net>; Observium<mailto:observium@observium.org> Cc: Tony Guadagno<mailto:tonyg@guadagno.org> Subject: Re: [Observium] LDAP auth to MS AD with TLS Self Signed Cert Sorry, I should have been more specific…I already have other apps using ldap with tls hitting the server and they work…so I am confident my AD server is properly configured. I work a lot with ldap and I often find that some apps that integrate with ldap and tls get picky about the cert..thats why I think it might be the fact that I am using a self signed cert (which is common on AD servers). Usually, there is a way to tell the application “ignore the fact that it is self signed, accept it anyway” Tony From: Brandon Lund<mailto:brandon@kansas.net> Sent: Wednesday, February 16, 2022 3:08 PM To: Observium<mailto:observium@observium.org> Cc: Tony Guadagno<mailto:tonyg@guadagno.org> Subject: Re: LDAP auth to MS AD with TLS Self Signed Cert looks like you need to enable tls for ad to start listing for ldaps no experience just a quick search. https://docs.microsoft.com/en-us/troubleshoot/windows-server/identity/enabl… [Image removed by sender.]<https://docs.microsoft.com/en-us/troubleshoot/windows-server/identity/enabl…> Enable Lightweight Directory Access Protocol (LDAP) over Secure Sockets Layer (SSL) - Windows Server | Microsoft Docs<https://docs.microsoft.com/en-us/troubleshoot/windows-server/identity/enabl…> docs.microsoft.com Describes how to enable LDAP over SSL with a third-party certification authority. Thanks Brandon Lund KansasNet Internet Services 785-776-1452 From: observium <observium-bounces(a)observium.org<mailto:observium-bounces@observium.org>> on behalf of Tony Guadagno via observium <observium(a)observium.org<mailto:observium@observium.org>> Sent: Wednesday, February 16, 2022 1:49 PM To: Tony Guadagno via observium Cc: Tony Guadagno Subject: [Observium] LDAP auth to MS AD with TLS Self Signed Cert Hi, I have ldap auth working mostly, if I set tls to false, I can authenticate. However, I want to be secure and when I enable tls, I get a debug error that says: Error binding to LDAP server: servername.local: Can’t contact LDAP server I am guessing the issue is the self signed cert that my server is using. My question is…how do I configure Observium to accept self signed certs for ldap? thanks Tony

2 2

DB error after Ubuntu/MySQL forced update
by Jason Vanlandingham 17 Feb '22

17 Feb '22

I'm getting the following error when trying to connect to my Observium page: DB not connected, please check database connection configuration. DB Error 2002: No such file or directory I found this post about it, but the fixes suggested here don't seem to work for me. https://www.turnkeylinux.org/forum/support/thu-20181129-0834/db-error-2002-… Has anyone else hit this problem and managed to fix it?

2 1

Re: [Observium] LDAP auth to MS AD with TLS Self Signed Cert
by Tony Guadagno 17 Feb '22

17 Feb '22

Adam, I have the cert for my AD server, as I said, I am pretty familiar with this process as I use ldap often for application authentication….what I am not very familiar with is php. Other apps have config options to set the paths for the certs etc. What I need help with is where (specifically) to put the config so that Observium will use it. I have the certs, I just need the syntax You mentioned putenv…where would I put that? It must be somewhere in Observium? Thanks for your help Tony From: Adam Armstrong via observium<mailto:observium@observium.org> Sent: Wednesday, February 16, 2022 6:42 PM To: 'Observium'<mailto:observium@observium.org> Cc: Adam Armstrong<mailto:adama@observium.org> Subject: Re: [Observium] LDAP auth to MS AD with TLS Self Signed Cert Whoops: putenv(‘LDAPTLS_CACERT=/path/to/rootca.pem’); Note that this seems to want the CA’s cert, not your server’s cert. Our code doesn’t have any consideration for TLS at all as far as I can see, it should all be transparent to Observium if you get PHP/LDAP into the situation where it accepts your cert. Adam. From: observium <observium-bounces(a)observium.org> On Behalf Of Adam Armstrong via observium Sent: 16 February 2022 23:36 To: 'Observium' <observium(a)observium.org> Cc: Adam Armstrong <adama(a)observium.org> Subject: Re: [Observium] LDAP auth to MS AD with TLS Self Signed Cert Presumably you need to extract your certs in the correct format and direct the commands to them. The LDAP connection is done by PHP’s LDAP module. You just need to work out how to do it with PHP’s module. It’s probably that you could override this globally with the php.ini rather than putting it in the config.php, too. There seems to be half a dozen solutions for making this work, which isn’t uncommon with infrequently used PHP features. There’s also this: putenv('/path/to/rootca.pem'); Adam. From: Tony Guadagno <tonyg(a)guadagno.org<mailto:tonyg@guadagno.org>> Sent: 16 February 2022 21:57 To: Observium <observium(a)observium.org<mailto:observium@observium.org>> Cc: Adam Armstrong <adama(a)observium.org<mailto:adama@observium.org>> Subject: RE: [Observium] LDAP auth to MS AD with TLS Self Signed Cert Adam, sorry for being dense, but do I just add these two lines directly (as is) to the config.php? ldap_set_option(null, LDAP_OPT_X_TLS_CACERTDIR, '/path/to'); ldap_set_option(null, LDAP_OPT_X_TLS_CACERTFILE, '/path/to/cert.pem'); I tried this with the paths to my certs and it had no affect. Do I need to wrap those command in some other syntax? thanks Tony From: Adam Armstrong via observium<mailto:observium@observium.org> Sent: Wednesday, February 16, 2022 4:25 PM To: 'Observium'<mailto:observium@observium.org> Cc: Adam Armstrong<mailto:adama@observium.org> Subject: Re: [Observium] LDAP auth to MS AD with TLS Self Signed Cert https://andreas.heigl.org/2020/01/31/handle-self-signed-certificates-with-p… I’d assume that getting your cert and putting the two ldap_set_option() commands into config.php should suffice. This seems like a better solution that turning off cert verification. Adam. From: observium <observium-bounces(a)observium.org<mailto:observium-bounces@observium.org>> On Behalf Of Tony Guadagno via observium Sent: 16 February 2022 21:03 To: Observium <observium(a)observium.org<mailto:observium@observium.org>>; Brandon Lund <brandon(a)kansas.net<mailto:brandon@kansas.net>> Cc: Tony Guadagno <tonyg(a)guadagno.org<mailto:tonyg@guadagno.org>> Subject: Re: [Observium] LDAP auth to MS AD with TLS Self Signed Cert I made a packet capture on the Observium server trying to login and if you look, you will see that it is indeed a self signed issue. How do I tell Observium to either trust the cert OR ignore the fact that it is self signed?? [cid:image002.png@01D82366.ADE67E70] Tony From: Tony Guadagno via observium<mailto:observium@observium.org> Sent: Wednesday, February 16, 2022 3:27 PM To: Brandon Lund<mailto:brandon@kansas.net>; Observium<mailto:observium@observium.org> Cc: Tony Guadagno<mailto:tonyg@guadagno.org> Subject: Re: [Observium] LDAP auth to MS AD with TLS Self Signed Cert Sorry, I should have been more specific…I already have other apps using ldap with tls hitting the server and they work…so I am confident my AD server is properly configured. I work a lot with ldap and I often find that some apps that integrate with ldap and tls get picky about the cert..thats why I think it might be the fact that I am using a self signed cert (which is common on AD servers). Usually, there is a way to tell the application “ignore the fact that it is self signed, accept it anyway” Tony From: Brandon Lund<mailto:brandon@kansas.net> Sent: Wednesday, February 16, 2022 3:08 PM To: Observium<mailto:observium@observium.org> Cc: Tony Guadagno<mailto:tonyg@guadagno.org> Subject: Re: LDAP auth to MS AD with TLS Self Signed Cert looks like you need to enable tls for ad to start listing for ldaps no experience just a quick search. https://docs.microsoft.com/en-us/troubleshoot/windows-server/identity/enabl… [Image removed by sender.]<https://docs.microsoft.com/en-us/troubleshoot/windows-server/identity/enabl…> Enable Lightweight Directory Access Protocol (LDAP) over Secure Sockets Layer (SSL) - Windows Server | Microsoft Docs<https://docs.microsoft.com/en-us/troubleshoot/windows-server/identity/enabl…> docs.microsoft.com Describes how to enable LDAP over SSL with a third-party certification authority. Thanks Brandon Lund KansasNet Internet Services 785-776-1452 From: observium <observium-bounces(a)observium.org<mailto:observium-bounces@observium.org>> on behalf of Tony Guadagno via observium <observium(a)observium.org<mailto:observium@observium.org>> Sent: Wednesday, February 16, 2022 1:49 PM To: Tony Guadagno via observium Cc: Tony Guadagno Subject: [Observium] LDAP auth to MS AD with TLS Self Signed Cert Hi, I have ldap auth working mostly, if I set tls to false, I can authenticate. However, I want to be secure and when I enable tls, I get a debug error that says: Error binding to LDAP server: servername.local: Can’t contact LDAP server I am guessing the issue is the self signed cert that my server is using. My question is…how do I configure Observium to accept self signed certs for ldap? thanks Tony

2 2

Re: [Observium] LDAP auth to MS AD with TLS Self Signed Cert
by Tony Guadagno 16 Feb '22

16 Feb '22

Adam, sorry for being dense, but do I just add these two lines directly (as is) to the config.php? ldap_set_option(null, LDAP_OPT_X_TLS_CACERTDIR, '/path/to'); ldap_set_option(null, LDAP_OPT_X_TLS_CACERTFILE, '/path/to/cert.pem'); I tried this with the paths to my certs and it had no affect. Do I need to wrap those command in some other syntax? thanks Tony From: Adam Armstrong via observium<mailto:observium@observium.org> Sent: Wednesday, February 16, 2022 4:25 PM To: 'Observium'<mailto:observium@observium.org> Cc: Adam Armstrong<mailto:adama@observium.org> Subject: Re: [Observium] LDAP auth to MS AD with TLS Self Signed Cert https://andreas.heigl.org/2020/01/31/handle-self-signed-certificates-with-p… I’d assume that getting your cert and putting the two ldap_set_option() commands into config.php should suffice. This seems like a better solution that turning off cert verification. Adam. From: observium <observium-bounces(a)observium.org> On Behalf Of Tony Guadagno via observium Sent: 16 February 2022 21:03 To: Observium <observium(a)observium.org>; Brandon Lund <brandon(a)kansas.net> Cc: Tony Guadagno <tonyg(a)guadagno.org> Subject: Re: [Observium] LDAP auth to MS AD with TLS Self Signed Cert I made a packet capture on the Observium server trying to login and if you look, you will see that it is indeed a self signed issue. How do I tell Observium to either trust the cert OR ignore the fact that it is self signed?? [cid:image002.png@01D82356.3DB8A3E0] Tony From: Tony Guadagno via observium<mailto:observium@observium.org> Sent: Wednesday, February 16, 2022 3:27 PM To: Brandon Lund<mailto:brandon@kansas.net>; Observium<mailto:observium@observium.org> Cc: Tony Guadagno<mailto:tonyg@guadagno.org> Subject: Re: [Observium] LDAP auth to MS AD with TLS Self Signed Cert Sorry, I should have been more specific…I already have other apps using ldap with tls hitting the server and they work…so I am confident my AD server is properly configured. I work a lot with ldap and I often find that some apps that integrate with ldap and tls get picky about the cert..thats why I think it might be the fact that I am using a self signed cert (which is common on AD servers). Usually, there is a way to tell the application “ignore the fact that it is self signed, accept it anyway” Tony From: Brandon Lund<mailto:brandon@kansas.net> Sent: Wednesday, February 16, 2022 3:08 PM To: Observium<mailto:observium@observium.org> Cc: Tony Guadagno<mailto:tonyg@guadagno.org> Subject: Re: LDAP auth to MS AD with TLS Self Signed Cert looks like you need to enable tls for ad to start listing for ldaps no experience just a quick search. https://docs.microsoft.com/en-us/troubleshoot/windows-server/identity/enabl… [Image removed by sender.]<https://docs.microsoft.com/en-us/troubleshoot/windows-server/identity/enabl…> Enable Lightweight Directory Access Protocol (LDAP) over Secure Sockets Layer (SSL) - Windows Server | Microsoft Docs<https://docs.microsoft.com/en-us/troubleshoot/windows-server/identity/enabl…> docs.microsoft.com Describes how to enable LDAP over SSL with a third-party certification authority. Thanks Brandon Lund KansasNet Internet Services 785-776-1452 From: observium <observium-bounces(a)observium.org> on behalf of Tony Guadagno via observium <observium(a)observium.org> Sent: Wednesday, February 16, 2022 1:49 PM To: Tony Guadagno via observium Cc: Tony Guadagno Subject: [Observium] LDAP auth to MS AD with TLS Self Signed Cert Hi, I have ldap auth working mostly, if I set tls to false, I can authenticate. However, I want to be secure and when I enable tls, I get a debug error that says: Error binding to LDAP server: servername.local: Can’t contact LDAP server I am guessing the issue is the self signed cert that my server is using. My question is…how do I configure Observium to accept self signed certs for ldap? thanks Tony

3 3

Re: [Observium] LDAP auth to MS AD with TLS Self Signed Cert
by Tony Guadagno 16 Feb '22

16 Feb '22

I made a packet capture on the Observium server trying to login and if you look, you will see that it is indeed a self signed issue. How do I tell Observium to either trust the cert OR ignore the fact that it is self signed?? [cid:image003.png@01D8234E.A5CB3950] Tony From: Tony Guadagno via observium<mailto:observium@observium.org> Sent: Wednesday, February 16, 2022 3:27 PM To: Brandon Lund<mailto:brandon@kansas.net>; Observium<mailto:observium@observium.org> Cc: Tony Guadagno<mailto:tonyg@guadagno.org> Subject: Re: [Observium] LDAP auth to MS AD with TLS Self Signed Cert Sorry, I should have been more specific…I already have other apps using ldap with tls hitting the server and they work…so I am confident my AD server is properly configured. I work a lot with ldap and I often find that some apps that integrate with ldap and tls get picky about the cert..thats why I think it might be the fact that I am using a self signed cert (which is common on AD servers). Usually, there is a way to tell the application “ignore the fact that it is self signed, accept it anyway” Tony From: Brandon Lund<mailto:brandon@kansas.net> Sent: Wednesday, February 16, 2022 3:08 PM To: Observium<mailto:observium@observium.org> Cc: Tony Guadagno<mailto:tonyg@guadagno.org> Subject: Re: LDAP auth to MS AD with TLS Self Signed Cert looks like you need to enable tls for ad to start listing for ldaps no experience just a quick search. https://docs.microsoft.com/en-us/troubleshoot/windows-server/identity/enabl… [https://docs.microsoft.com/en-us/media/logos/logo-ms-social.png]<https://docs.microsoft.com/en-us/troubleshoot/windows-server/identity/enabl…> Enable Lightweight Directory Access Protocol (LDAP) over Secure Sockets Layer (SSL) - Windows Server | Microsoft Docs<https://docs.microsoft.com/en-us/troubleshoot/windows-server/identity/enabl…> docs.microsoft.com Describes how to enable LDAP over SSL with a third-party certification authority. Thanks Brandon Lund KansasNet Internet Services 785-776-1452 From: observium <observium-bounces(a)observium.org> on behalf of Tony Guadagno via observium <observium(a)observium.org> Sent: Wednesday, February 16, 2022 1:49 PM To: Tony Guadagno via observium Cc: Tony Guadagno Subject: [Observium] LDAP auth to MS AD with TLS Self Signed Cert Hi, I have ldap auth working mostly, if I set tls to false, I can authenticate. However, I want to be secure and when I enable tls, I get a debug error that says: Error binding to LDAP server: servername.local: Can’t contact LDAP server I am guessing the issue is the self signed cert that my server is using. My question is…how do I configure Observium to accept self signed certs for ldap? thanks Tony

3 3

Re: [Observium] LDAP auth to MS AD with TLS Self Signed Cert
by Tony Guadagno 16 Feb '22

16 Feb '22

Sorry, I should have been more specific…I already have other apps using ldap with tls hitting the server and they work…so I am confident my AD server is properly configured. I work a lot with ldap and I often find that some apps that integrate with ldap and tls get picky about the cert..thats why I think it might be the fact that I am using a self signed cert (which is common on AD servers). Usually, there is a way to tell the application “ignore the fact that it is self signed, accept it anyway” Tony From: Brandon Lund<mailto:brandon@kansas.net> Sent: Wednesday, February 16, 2022 3:08 PM To: Observium<mailto:observium@observium.org> Cc: Tony Guadagno<mailto:tonyg@guadagno.org> Subject: Re: LDAP auth to MS AD with TLS Self Signed Cert looks like you need to enable tls for ad to start listing for ldaps no experience just a quick search. https://docs.microsoft.com/en-us/troubleshoot/windows-server/identity/enabl… [https://docs.microsoft.com/en-us/media/logos/logo-ms-social.png]<https://docs.microsoft.com/en-us/troubleshoot/windows-server/identity/enabl…> Enable Lightweight Directory Access Protocol (LDAP) over Secure Sockets Layer (SSL) - Windows Server | Microsoft Docs<https://docs.microsoft.com/en-us/troubleshoot/windows-server/identity/enabl…> docs.microsoft.com Describes how to enable LDAP over SSL with a third-party certification authority. Thanks Brandon Lund KansasNet Internet Services 785-776-1452 From: observium <observium-bounces(a)observium.org> on behalf of Tony Guadagno via observium <observium(a)observium.org> Sent: Wednesday, February 16, 2022 1:49 PM To: Tony Guadagno via observium Cc: Tony Guadagno Subject: [Observium] LDAP auth to MS AD with TLS Self Signed Cert Hi, I have ldap auth working mostly, if I set tls to false, I can authenticate. However, I want to be secure and when I enable tls, I get a debug error that says: Error binding to LDAP server: servername.local: Can’t contact LDAP server I am guessing the issue is the self signed cert that my server is using. My question is…how do I configure Observium to accept self signed certs for ldap? thanks Tony

1 0

LDAP auth to MS AD with TLS Self Signed Cert
by Tony Guadagno 16 Feb '22

16 Feb '22

Hi, I have ldap auth working mostly, if I set tls to false, I can authenticate. However, I want to be secure and when I enable tls, I get a debug error that says: Error binding to LDAP server: servername.local: Can’t contact LDAP server I am guessing the issue is the self signed cert that my server is using. My question is…how do I configure Observium to accept self signed certs for ldap? thanks Tony

2 1

Hosts
by Jacek.Dabrowski＠selgros.pl 16 Feb '22

16 Feb '22

Hello, I have a question Is it possible to export a list of all hosts in Observium to txt/csv file ? Regards Jacek Dąbrowski

4 4

Alert dependency
by Toky ANDRIANASOLO 09 Feb '22

09 Feb '22

Hello, Is it possible to set an alert dependency on observium? for example if there are 04 devices on the network: 01 router and 03 cascading switches.. If the router goes down, we do not need the 03 switches sending an alert anymore as they depends on the router. This will save us from flooding alert and make the alerting system more efficient. Thank You and Regards, Toky,

2 1

alert sensibility setting
by Toky ANDRIANASOLO 09 Feb '22

09 Feb '22

Hello, we are setting an alert based on device status metric, so if the device status is 0 (down), an alert will be sent to a group of mail destination.. Now we want to adjust the alert sensibility of observium in order to sent the mail if the device is down for 10 mn, in other words, if the device is down then up after 8mn for example, we don't want to be alerted. Thank you and Regads, Toky

2 2

poller overwrites manual sensor limits
by Joey Stanford 04 Feb '22

04 Feb '22

Hi, We’ve disabled service discovery in order to zero in on why custom sensor limits are being overwritten. As far as we can ascertain, it appears that the poller is doing this but we’re not sure when/how since it doesn’t reset on every poll. It’s so transient that we’re finding it very difficult to identify the actual culprit. Can anyone offer tips on how we can debug this further? Thanks, Joey

1 0

Sending device status to external status page
by Joey Stanford 30 Jan '22

30 Jan '22

Hi, Ideas wanted. As a service provider, I want to expose basic up/down status to my consumers, So they can self-discover if a portion of the network in their area is affected. In my case, I have emergency communication systems and I would love to make some of these visible in an up/down fashion to people. A status page or uptime robot basic presentation. Any ideas on how I might do this? Joey

2 1

Abort during initial installation
by marco＠gallux.de 26 Jan '22

26 Jan '22

I have the following problem. On a freshly installed Debian11 system I get the following error message. It doesn't matter whether I do the installation via script or manually. #### ERROR #### root@netservice:/opt/observium# ./discovery.php -u PHP Fatal error: Uncaught mysqli_sql_exception: Table 'observium.observium_attribs' doesn't exist in /opt/observium/includes/db/mysqli.inc.php:315 Stack trace: #0 /opt/observium/includes/db/mysqli.inc.php(315): mysqli_query() #1 /opt/observium/includes/db.inc.php(224): dbCallQuery() #2 /opt/observium/includes/db/mysqli.inc.php(426): dbQuery() #3 /opt/observium/includes/common.inc.php(170): dbFetchRow() #4 /opt/observium/includes/sql-config.inc.php(100): get_obs_attrib() #5 /opt/observium/discovery.php(19): include('...') #6 {main} thrown in /opt/observium/includes/db/mysqli.inc.php on line 315 ######## what am I doing wrong? I knit according to the instructions.

2 1

All graphs stopped at Jan 1st 00:00
by Richard Waardijk 26 Jan '22

26 Jan '22

Hi, I did not notice it earlier but somehow all graphs stopped on Jan 1st 00:00 ? Doesn't matter for which device I look or at what type of graph. The graphs look like this: [cid:image003.png@01D81120.552DF310] [cid:image004.png@01D81120.552DF310] Does anyone have seen this before? I haven't made changes to the Observium installation recently. I only updated the OS where Observium is running (was running on an old Ubuntu 16.02 version and is now upgrades to Ubuntu 20.04). But that was done in week 50 (the week of Dec 13th) and after that the graphs still worked. So strange that it exactly stopped at midnight of the new year? [cid:image005.png@01D81120.552DF310] If anybody got tips how to get this working again please let me know. Thank you, Richard

2 3

graphs shows peaks huawei S6700
by Ing. Andrés Gallo 25 Jan '22

25 Jan '22

Hello I'm using Observium latest version. Most of the grapsh for interfaces are pretty good. But for 2 Huaweis switches S6730, the collected data appears kind of 'saw': Same device, polled with a Cacti server, shows this way: A few 'spikes' but far more smooth graph. The polling time is between 10 to 13 seconds, CPU ok, memory too. Can someone have an idea what to do to avoid the spikes? Regards -- Saludos Saludos, * Ing. Andrés E. Gallo* Tel (02255)-46-1641 Móvil (02255)-15-57-0220 Paseo 114 y Av. 3 (B7165) Villa Gesell-Bs.As. agallo(a)cotel.com.ar http://www.gesell.com.ar

1 0

Dashboard Map Device Count
by Anthony Milazzo 22 Jan '22

22 Jan '22

Hi I've been having an issue with the number of devices per location not being correct when displayed on the Dashboard Map. A few of our sites have the correct count, but most do not. From the list view everything is ok. The devices accessible and are set to a location that is geolocating to coordinates, but it's like they're not being counted properly. Thanks Tony

3 4

Apllication for new devices not seen
by walter＠onda.ch 18 Jan '22

18 Jan '22

Hello Maybe I miss smeething... I have add some new devices and no of them is showing the aplication like apache. In the application tab of the properties is also empty. But telnet <host> 36602 are displaying information like the other device, where the app is installed and showing in Observium Any idea? Regards Walter

4 7

Issue SAI/UPS
by Arnoldo Vidal Bravo 12 Jan '22

12 Jan '22

Hello, for some time the snmp revision of a UPS tells us that it was restarted 43 minutes ago, and it has not been restarted in a year (only for maintenance). A blue box indicates "restarted", then it disappears and at the same time it appears again. What could be the problem? Vendor/Hardware Socomec MASTERYS 3/3 SYSTEM 90 kVA Operating system Net Vision UPS 7023511133) System name net vision [image: image.png] -- Saluda cordialmente

2 1

Monitoring IPV6 only host
by thibs＠thibs.com 10 Jan '22

10 Jan '22

Hello, I’ve removed IPV4 address to some monitored Linux host Before the removal, those hosts were correctly monitored. My Observium host is both IPV4 and IPV6 connected. I’m using the really latest one stable version : Observium Professional 21.12.11831 I’m able to make manual SNMP requests from the Observium host to the IPV6 hosts snmpwalk -v 2c -c PRIVATE_SNMP_COMMUNITY FQDN-IPV6 This first command is successful but this second one shows me an error : /opt/observium/poller.php -d -h FQDN-IPV6 ... CMD[/usr/bin/snmpget -v2c -c *** -Pud -OQUsn -m SNMPv2-MIB -M /opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp 'udp':' FQDN-IPV6':'161' .1.3.6.1.2.1.1.2.0 .1.3.6.1.2.1.1.3.0] CMD EXITCODE[1] CMD RUNTIME[0.0045s] STDOUT[ ] STDERR[ snmpget: Unknown host (udp: FQDN-IPV6:161) ] SNMP STATUS[FALSE] o Device status Device is not responding to SNMP requests RRD /opt/observium/rrd/ FQDN-IPV6/status.rrd already exists - no need to create. Is it a known limitation ? Did I do something wrong ? Best Regards Thibault

3 4

Observium 11835 broken?
by David Milton 08 Jan '22

08 Jan '22

Hello, I was noticing a new version so did my usual: 15:01 dmilton@saison:/opt/observium$ sudo svn up [sudo] password for dmilton: Updating '.’: ..snip.. A update/457.sql A update/458.sql U . Updated to revision 11835. 15:02 dmilton@saison:/opt/observium$ sudo ./discovery.php -u ___ _ _ / _ \ | |__ ___ ___ _ __ __ __(_) _ _ _ __ ___ | | | || '_ \ / __| / _ \| '__|\ \ / /| || | | || '_ ` _ \ | |_| || |_) |\__ \| __/| | \ V / | || |_| || | | | | | \___/ |_.__/ |___/ \___||_| \_/ |_| \__,_||_| |_| |_| Observium Professional 21.12.11831 https://www.observium.org -- Updating database/file schema 456 -> 457 # (db) ..... Done (0s). 457 -> 458 # (db) ... Done (0s). -- Done. -- Observium is up to date. The first thing I noticed is that the index.html permissions were wrong: -rw------- 1 root root 25K Jan 4 15:02 index.php I fixed that but now it is complaining about a missing function: [Tue Jan 04 15:42:30.029551 2022] [php7:error] [pid 10509:tid 140735418468096] [client 204.83.3.136:51456] PHP Fatal error: Uncaught Error: Call to undefined function print_error() in /opt/observium/html/index.php:20\nStack trace:\n#0 {main}\n thrown in /opt/observium/html/index.php on line 20 So what are the next steps? Thanks, Dave.

4 5

PHP error on update
by Joey Stanford 08 Jan '22

08 Jan '22

PHP Fatal error: Uncaught Error: Call to undefined function mb_strtolower() in /opt/observium/libs/Phpfastcache8/Core/Pool/IO/IOHelperTrait.php:123 Stack trace: #0 /opt/observium/libs/Phpfastcache8/Drivers/Files/Driver.php(60): Phpfastcache\Drivers\Files\Driver->getPath() #1 /opt/observium/libs/Phpfastcache8/Core/Pool/DriverBaseTrait.php(75): Phpfastcache\Drivers\Files\Driver->driverCheck() #2 /opt/observium/libs/Phpfastcache8/Drivers/Files/Driver.php(52): Phpfastcache\Drivers\Files\Driver->__parentConstruct(Object(Phpfastcache\Drivers\Files\Config), '967045f41b52c87...') #3 /opt/observium/libs/Phpfastcache8/CacheManager.php(189): Phpfastcache\Drivers\Files\Driver->__construct(Object(Phpfastcache\Drivers\Files\Config), '967045f41b52c87...') #4 /opt/observium/includes/cache.inc.php(603): Phpfastcache\CacheManager::getInstance('Files') #5 /opt/observium/includes/sql-config.inc.php(310): include_once('/opt/observium/...') #6 /opt/observium/discovery.php(19): include('/opt/observium/...') #7 {main} thrown in /opt/observium/libs/Phpfastcache8/Core/Pool/IO/IOHelperTrait.php on line 123

4 10

svn update problem
by Hubacek, Ondrej 06 Jan '22

06 Jan '22

Hello, i have problem with updating Observium professional subscription via svn update. I got following message from server. root@otobsrvx:/opt/observium# svn update Updating '.': Error validating server certificate for 'https://svn.observium.org:443': - The certificate is not issued by a trusted authority. Use the fingerprint to validate the certificate manually! Certificate information: - Hostname: svn.observium.org - Valid: from Dec 3 20:01:51 2021 GMT until Mar 3 20:01:50 2022 GMT - Issuer: sia.conti.de, GF FCLIT CIT IN OP CS IAS, Continental AG, Frankfurt, Hessen, DE - Fingerprint: EF:F9:E2:5F:F9:31:10:02:6A:AD:8C:B9:8F:14:6F:F6:80:8D:D3:DB (R)eject, accept (t)emporarily or accept (p)ermanently? p Authentication realm: https://svn.observium.org:443 Observium Professional Repository Password for 'Barum-9395738': ******** Authentication realm: https://svn.observium.org:443 Observium Professional Repository Username: ^Csvn: E170013: Unable to connect to a repository at URL 'https://svn.observium.org/svn/observium/branches/stable'<https://svn.observium.org/svn/observium/branches/stable%27> svn: E200015: The operation was interrupted Do you have any advice how to resolve it? Thank you Hezký den / Best regards, Bc. Ondřej Hubáček IT Network Specialist Continental Tire Plant Otrokovice Visitor’s address/Billing address: Continental Barum s.r.o. Objízdná 1628, 765 02 Otrokovice, Czech Republic Phone: +420 577 512 765 Cell-phone: +420 739 604 074 E-mail: ondrej.hubacek(a)barum.cz<mailto:ondrej.hubacek@barum.cz> Web: www.continental.cz<http://www.continental.cz/> [cid:image001.png@01D80157.6AAE25D0] Continental Barum s.r.o., Objízdná 1628, 765 02 Otrokovice, The Czech Republic. Executive heads: Ing Libor Láznička, Ph.D., Ing. Jan Černošek, Ing. Pavol Červenák. Company registred: by the District Court in Brno, File No. C 15057. IČ: 45788235 I DIČ: CZ699000347 I DIČ: SK4020104055 Internal

3 2

Re: [Observium] [EXTERNAL SENDER] Re: Observium Pro update error
by Hamilton, Kent 04 Jan '22

04 Jan '22

Ignore me, found the issue? On 1/4/22, 08:52, "Adam Armstrong" <adama(a)observium.org<mailto:adama@observium.org>> wrote: This would seem to be some sort of internal MySQL error. Adam. Sent from my iPhone On 4 Jan 2022, at 14:40, Hamilton, Kent <KHamilton(a)exegy.com> wrote: I’m getting the following after updating today. # discovery.php -u ___ _ _ / _ \ | |__ ___ ___ _ __ __ __(_) _ _ _ __ ___ | | | || '_ \ / __| / _ \| '__|\ \ / /| || | | || '_ ` _ \ | |_| || |_) |\__ \| __/| | \ V / | || |_| || | | | | | \___/ |_.__/ |___/ \___||_| \_/ |_| \__,_||_| |_| |_| Observium Professional 21.12.11831 https://www.observium.org -- Updating database/file schema 457 -> 458 # (db) FF stopped. Critical error: (3664) Failed to set SDI '<no schema>.<no table>' in tablespace 'observium/#sql2-607-48b2a8'. ________________________________ This e-mail and any documents accompanying it may contain legally privileged and/or confidential information belonging to Exegy, Inc. Such information may be protected from disclosure by law. The information is intended for use by only the addressee. If you are not the intended recipient, you are hereby notified that any disclosure or use of the information is strictly prohibited. If you have received this e-mail in error, please immediately contact the sender by e-mail or phone regarding instructions for return or destruction and do not use or disclose the content to others.

1 0

Observium Pro update error
by Hamilton, Kent 04 Jan '22

04 Jan '22

I’m getting the following after updating today. # discovery.php -u ___ _ _ / _ \ | |__ ___ ___ _ __ __ __(_) _ _ _ __ ___ | | | || '_ \ / __| / _ \| '__|\ \ / /| || | | || '_ ` _ \ | |_| || |_) |\__ \| __/| | \ V / | || |_| || | | | | | \___/ |_.__/ |___/ \___||_| \_/ |_| \__,_||_| |_| |_| Observium Professional 21.12.11831 https://www.observium.org -- Updating database/file schema 457 -> 458 # (db) FF stopped. Critical error: (3664) Failed to set SDI '<no schema>.<no table>' in tablespace 'observium/#sql2-607-48b2a8'. ________________________________ This e-mail and any documents accompanying it may contain legally privileged and/or confidential information belonging to Exegy, Inc. Such information may be protected from disclosure by law. The information is intended for use by only the addressee. If you are not the intended recipient, you are hereby notified that any disclosure or use of the information is strictly prohibited. If you have received this e-mail in error, please immediately contact the sender by e-mail or phone regarding instructions for return or destruction and do not use or disclose the content to others.

1 0

Arista VARP IP addresses not being discovered?
by Adam Thompson 31 Dec '21

31 Dec '21

We’ve noticed that although Observium picks up the VRRPv3 virtual IP addresses on our Cisco NX-OS switches, it does not detect or capture the VARP virtual IP addresses on our Arista EOS switches. Is that expected behaviour? If so, what information do you need to change Observium so that it can detect VARP IPs and display them on the appropriate interfaces? If not, what debug output should I be looking at – discovery? Polling? Which section? Thanks, -Adam Adam Thompson Consultant, Infrastructure Services [MERLIN] 100 - 135 Innovation Drive Winnipeg, MB, R3T 6A8 (204) 977-6824 or 1-800-430-6404 (MB only) athompson(a)merlin.mb.ca<mailto:athompson@merlin.mb.ca> www.merlin.mb.ca<http://www.merlin.mb.ca/>

3 2

Alerting feature request
by Joey Stanford 30 Dec '21

30 Dec '21

From my colleagues: > > What we would REALLY like is the ability to turn off alerts on a particular device for a specified amount of time. For example, when Winter Park goes flakey but it is really Comcast or Centurylink that need to fix the problem, I don't want alerts every 10 minutes to tell me the link still sucks. > > There are several possible solutions to this. One is a manual "suppress alerts for X hours". It is important that the alerts be turned back on after the specified time because otherwise we tend to forget to turn it back on. > > Another option is a rate limit on alerts by device. After 5 alerts I probably figured out the link sucks. > > A third option is a "delay on recover". Right now we get a recover as soon as one check passes. If it is flakey we may want to have more checks pass before declaring it recovered. This would probably be something we want to do by device, because from most I want to know as soon as it is back.

4 4

alert boxes
by Arnoldo Vidal Bravo 30 Dec '21

30 Dec '21

hi, we were administrative problems to update observium from version 18 to 21, in latest version alert or warning box could show "...XX more", how we can view this alerts? in version 18 all alerts was show. -- Saluda cordialmente

3 2

power converter AC to DC - Huawei ETP4860-B1A2
by Andre Bolzan 28 Dec '21

28 Dec '21

Hello ! We received two unit of Huawei ETP4860-B1A2 with manager module SNMP, this power converterAC to DC for 48V telecommunications equipments. When we add the equipments in observium , it's show "generical" device. We asked Huawei about thi4e case and Huawei told us if the "current regular mib" had the OIDs for ETP4860. We try to make observium discoveries about the correct type "power" and vendor "huawei" to get the power information, like load, AC entry, baterya load, and so on... We was fight with this equipment more 1 year and can't make running =( We flap the "loss flag" and ask for help for anyone who can help us. [image: image.png] follow in attach the Huawei current MIB, the equipment MIB downloaded in web page and our "mapping informations" [image: image.png] Thanks in advance ! Sorry my english... We are a brazilian team =) -- *André Bolzan* *+55 11 98205-7742*

1 0

(no subject)
by Rahul M 24 Dec '21

24 Dec '21

Hi team, Can we set an alert mechanism for the virtual machine status, which observium pulled out from the VMware ?

1 0

integrate Observium with Grafana
by Luis Olavarrieta 23 Dec '21

23 Dec '21

Hi guys, has anyone integrated Observium with Grafana to create dashboards? I don’t know the structure of the DB in observium and have been doing some test with no luck on the results, so any examples will be really appreciated. Regard,s Luis

6 5

issue on device
by Arnoldo Vidal Bravo 23 Dec '21

23 Dec '21

hi, we have a UPS Socomec MASTERYS 3/3 SYSTEM 90 kVA, and alert boxes shows many ports down, [image: image.png] this UPS has only 1 port observium 21.10.11678 (stable) -- Saluda cordialmente

3 2

syslog issues
by Brad Bendy 22 Dec '21

22 Dec '21

Spent hours on this and am at a loss. Got some hosts that won't have syslog show up in the GUI, digging further the DB shows the IP not the hostname for those records, so that makes sense why they are not showing up. Looking at the actual data coming over syslog the devices that work and don't work show the exact same format. Nothing different at all, and identical configs on identical devices. Is there a debug or another log that I am not seeing that would show why these entries are getting inserted into the DB as IP addresses and not being replaced with hostnames? At a loss, any suggestions would be great! Thanks

2 1

graph on home page
by Arnoldo Vidal Bravo 21 Dec '21

21 Dec '21

hi, I need show a traffic in and out (graph) only on 1 interface, how i can do? i have a group for identify the interface... device in X and port label short Y, but only show the totals, not detail [image: image.png] i hope to view this [image: image.png] -- Saluda cordialmente

2 2

observium graphs
by Arnoldo Vidal Bravo 21 Dec '21

21 Dec '21

hi, I doing work 100% on an observium in deploy mode, but i must customize some views. To make this, i have a second observium (web ui) linked to the main observium, but i can`t see the graphs. The rrdcached must be configured on the second observium? -- Saluda cordialmente

2 1

Ruckus zone director support
by Brandon Lund 20 Dec '21

20 Dec '21

is anyone monitoring ruckus zone directors? it looks like it provides a bunch of useful info via snmp but observium is not graphing much other then the bandwidth on the interfaces. main thing i am looking for would be a graph of the number of ap's connected. 1.3.6.1.4.1.25053.1.2.1.1.1.15.1.0 aka online ap number RUCKUS-ZD-SYSTEM-MIB::ruckusZDSystemStatsNumAP.0 = Gauge32: 15 ^ is a oid i found from a script i run against my Nagios to monitor the same stat, just would like a graph also. i am sure there is lots of other useful info also ,eg number of clients connected per wlan, per ap, etc. it looks like you already have the mib file for these installed but i am not sure where i would start customizing the code. i would think i need to make a new OS for ruckus zonedirector different than ruckus aps, and then have that apply these mibs, but i am unsure where i should start. Thanks Brandon Lund KansasNet Internet Services 785-776-1452

2 1

issue on version 21.10.11678
by Arnoldo Vidal Bravo 20 Dec '21

20 Dec '21

we have a many switch configured on observium, last friday we done a update of observium, but some switch alert CPU use over 80% on CPU 1, but the device has not have CPU 1. how restrict an alert to only CPU 0? -- Saluda cordialmente

1 0

Change License details
by Thodoris Lakiotis 18 Dec '21

18 Dec '21

Hi, Is there any work around, to which actions we need to do for changing license details in a working subscription environment? Current license terminated and renewed with different username & password Thanks! Thodoris

2 1

Re: [Observium] question about wmi
by Tony Guadagno 17 Dec '21

17 Dec '21

Rando, I followed this KB https://docs.observium.org/device_windows/ and it just worked. The reason I asked the questions is that it is not immediately obvious that it is working or not. The poller.php -m wmi -v proves it is working but also, I realized that if wmi is working, then your Microsoft devices will show a “windows services” tab. Also, I have Observium installed on RHEL 8. There seems to be no wmi package for version 8 (CentOS or RHEL). I installed the wmi RPM for version 7 and it seems to be working…fyi Good luck Tony From: Rando Sui Sent: Friday, December 17, 2021 6:29 AM To: Observium Cc: Tony Guadagno Subject: RE: [Observium] question about wmi Hello, How did you get WMI working and passing info? Greetings, Rando. From: observium <observium-bounces(a)observium.org> On Behalf Of Tony Guadagno via observium Sent: kolmapäev, 15. detsember 2021 20:33 To: Observium <observium(a)observium.org> Cc: Tony Guadagno <tonyg(a)guadagno.org> Subject: Re: [Observium] question about wmi All, thanks for the help….i think wmi is working because I am now seeing the “windows services” tab on my windows servers. That was not present before. Thanks again Tony From: Adam Armstrong via observium Sent: Tuesday, December 14, 2021 7:08 PM To: 'Observium' Cc: Adam Armstrong Subject: Re: [Observium] question about wmi There’s not likely to be any WMIC messages in that log, not much goes into there. WMIC isn’t used for very much. It slightly improves some windows data, mostly storage. You’ll probably see whatever it does by doing a debugged poller run for the device you’re using WMIC with. Adam. From: observium <observium-bounces(a)observium.org> On Behalf Of Tony Guadagno via observium Sent: 14 December 2021 18:36 To: Pisano, Anthony D. via observium <observium(a)observium.org> Cc: Tony Guadagno <tonyg(a)guadagno.org> Subject: [Observium] question about wmi Hi, I have enabled wmi on my install. I have tested my config with wmic and it seems to work. I have put the global parms in and I am not seeing any log messages about wmi. How do I know if wmi is being attempted? [2021/12/14 18:30:01 +0000] discovery.php(560036): /opt/observium/discovery.php: new - 0 devices discovered in 0.001 secs [2021/12/14 18:30:04 +0000] poller.php(560053): poller.php: abc-wolcott2.company.local - 1 devices polled in 2.943 secs [2021/12/14 18:30:07 +0000] poller.php(560051): poller.php: abc-lyo-sw-3.company.local - 1 devices polled in 5.134 secs [2021/12/14 18:30:07 +0000] poller.php(560049): poller.php: abc-observium.company.local - 1 devices polled in 5.509 secs [2021/12/14 18:30:12 +0000] poller.php(560047): UNIX-AGENT: Connection on tcp://abc-esx15.company.local:36602 failed. ERROR: 110 Connection timed out [2021/12/14 18:30:14 +0000] poller.php(560047): poller.php: abc-esx15.company.local - 1 devices polled in 12.67 secs [2021/12/14 13:30:14 -0500] poller-wrapper.py(560037): /opt/observium/poller-wrapper.py: processed 4 devices in 13.78 seconds with 4 threads, load average (5min) 0.13 Tony

1 0

Re: [Observium] question about wmi
by Tony Guadagno 17 Dec '21

17 Dec '21

All, thanks for the help….i think wmi is working because I am now seeing the “windows services” tab on my windows servers. That was not present before. Thanks again Tony From: Adam Armstrong via observium Sent: Tuesday, December 14, 2021 7:08 PM To: 'Observium' Cc: Adam Armstrong Subject: Re: [Observium] question about wmi There’s not likely to be any WMIC messages in that log, not much goes into there. WMIC isn’t used for very much. It slightly improves some windows data, mostly storage. You’ll probably see whatever it does by doing a debugged poller run for the device you’re using WMIC with. Adam. From: observium <observium-bounces(a)observium.org> On Behalf Of Tony Guadagno via observium Sent: 14 December 2021 18:36 To: Pisano, Anthony D. via observium <observium(a)observium.org> Cc: Tony Guadagno <tonyg(a)guadagno.org> Subject: [Observium] question about wmi Hi, I have enabled wmi on my install. I have tested my config with wmic and it seems to work. I have put the global parms in and I am not seeing any log messages about wmi. How do I know if wmi is being attempted? [2021/12/14 18:30:01 +0000] discovery.php(560036): /opt/observium/discovery.php: new - 0 devices discovered in 0.001 secs [2021/12/14 18:30:04 +0000] poller.php(560053): poller.php: abc-wolcott2.company.local - 1 devices polled in 2.943 secs [2021/12/14 18:30:07 +0000] poller.php(560051): poller.php: abc-lyo-sw-3.company.local - 1 devices polled in 5.134 secs [2021/12/14 18:30:07 +0000] poller.php(560049): poller.php: abc-observium.company.local - 1 devices polled in 5.509 secs [2021/12/14 18:30:12 +0000] poller.php(560047): UNIX-AGENT: Connection on tcp://abc-esx15.company.local:36602 failed. ERROR: 110 Connection timed out [2021/12/14 18:30:14 +0000] poller.php(560047): poller.php: abc-esx15.company.local - 1 devices polled in 12.67 secs [2021/12/14 13:30:14 -0500] poller-wrapper.py(560037): /opt/observium/poller-wrapper.py: processed 4 devices in 13.78 seconds with 4 threads, load average (5min) 0.13 Tony

2 1

Re: [Observium] Cannot buy Subscription for Professional version
by Thodoris Lakiotis 17 Dec '21

17 Dec '21

Hello Everything were sorted out!! Subscription is done. The question is: How can i license current Observium Installation with the new license details? Thanks!! Thodoris On Thu, Dec 16, 2021 at 1:21 PM Thodoris Lakiotis <tlak(a)synapsecom.gr> wrote: > Hello > > I feel here that you are not got what is the point. > > The subscription is canceled. This is done. End of story. > > Now i need to buy again, but just for one year, without yearly > subscription. But paddle do not give that option by default. I can for sure > do it as you suggest, but i just can't proceed, because my PayPal account > do not allow to buy subscription based services, but only one-off. > From PayPal they say that the merchant do not allow to pay with PayPal > balance?!? > > Is this more clear? > > Thodoris > > On Thu, Dec 16, 2021 at 12:55 PM Simon Smith via observium < > observium(a)observium.org> wrote: > >> Hi, >> >> Why not subscribe for the year, >> >> Let paddle take the money, >> >> Let observium give you user/pass etc in there panel, >> >> Then in a days time, go into the observium panel and cancel your >> subscription with paddle? >> >> Then it wont auto-renew next year!? >> >> Regards >> >> Simon >> >> On 16 Dec 2021, at 10:39, Thodoris Lakiotis via observium < >> observium(a)observium.org> wrote: >> >> Hi Adam, thanks for your responce. >> >> The problems here are that i cannot find a representative from Paddle. >> And i cannot buy one year license without subscription. I need one-off >> payments, not recurring with subscriptions. >> >> Is there anyone from paddle that could help me address this issue. >> Dear Lord, we just need to buy your software, there nust be something >> done!! >> >> Thanks!! >> >> On Wed, Dec 15, 2021 at 10:54 PM Adam Armstrong via observium < >> observium(a)observium.org> wrote: >> >>> Hi Theodore, >>> >>> >>> >>> What’s the problem? >>> >>> >>> >>> We have limited ability to do much with the Paddle platform except for >>> cancel things, though. J >>> >>> >>> >>> Thanks, >>> >>> Adam. >>> >>> >>> >>> *From:* observium <observium-bounces(a)observium.org> *On Behalf Of *Thodoris >>> Lakiotis via observium >>> *Sent:* 15 December 2021 15:29 >>> *To:* Observium <observium(a)observium.org> >>> *Cc:* Thodoris Lakiotis <tlak(a)synapsecom.gr> >>> *Subject:* [Observium] Cannot buy Subscription for Professional version >>> >>> >>> >>> Hello Team!! >>> >>> I need help to address an issue with the renewal of our subscription >>> with Professional Observium. >>> >>> I cannot find resolution, so far, with paddle. >>> >>> Is there anybony could help me from Observium team? >>> >>> >>> >>> Thanks and Regards, >>> >>> >>> >>> Theodore >>> _______________________________________________ >>> observium mailing list >>> observium(a)observium.org >>> http://postman.memetic.org/cgi-bin/mailman/listinfo/observium >>> >> _______________________________________________ >> observium mailing list >> observium(a)observium.org >> http://postman.memetic.org/cgi-bin/mailman/listinfo/observium >> >> >> _______________________________________________ >> observium mailing list >> observium(a)observium.org >> http://postman.memetic.org/cgi-bin/mailman/listinfo/observium >> >

1 0

Re: [Observium] add support for ASCO Transfer switch
by Tony Guadagno 16 Dec '21

16 Dec '21

Adam, happy to do that, can you give me the snmpwalk syntax you would like? It seems like transfer switches and generators are the worst mibs…but its all I have to go on. thanks Tony From: Adam Armstrong via observium Sent: Thursday, December 16, 2021 11:03 AM To: 'Observium' Cc: Adam Armstrong Subject: Re: [Observium] add support for ASCO Transfer switch Hi Tony, That’s something of a horrific MIB. It doesn’t use tables properly and has really bad oid numbering, so isn’t the easiest thing to support. You should probably open a jira and provide the mib along with an snmp walk in the format the ticket requests at https://jira.observium.org Adam. From: observium <observium-bounces(a)observium.org> On Behalf Of Tony Guadagno via observium Sent: 16 December 2021 13:37 To: Pisano, Anthony D. via observium <observium(a)observium.org> Cc: Tony Guadagno <tonyg(a)guadagno.org> Subject: [Observium] add support for ASCO Transfer switch Hi, could you please evaluate this mid. Currently you show the Asco icon but no other information. I would like to see transfer switch state etc. Let me know if you need anything else, I will be happy to gather logs. Thanks Tony

1 0

add support for ASCO Transfer switch
by Tony Guadagno 16 Dec '21

16 Dec '21

Hi, could you please evaluate this mid. Currently you show the Asco icon but no other information. I would like to see transfer switch state etc. Let me know if you need anything else, I will be happy to gather logs. Thanks Tony

2 1

Cannot buy Subscription for Professional version
by Thodoris Lakiotis 16 Dec '21

16 Dec '21

Hello Team!! I need help to address an issue with the renewal of our subscription with Professional Observium. I cannot find resolution, so far, with paddle. Is there anybony could help me from Observium team? Thanks and Regards, Theodore

3 3

what do you need to add support for a device?
by Tony Guadagno 15 Dec '21

15 Dec '21

Hi, I have a couple of devices that are under supported or not supported. I have manufacturers mibs for them, what else would you need to evaluate them for support? thanks Tony

1 0

question about wmi
by Tony Guadagno 15 Dec '21

15 Dec '21

Hi, I have enabled wmi on my install. I have tested my config with wmic and it seems to work. I have put the global parms in and I am not seeing any log messages about wmi. How do I know if wmi is being attempted? [2021/12/14 18:30:01 +0000] discovery.php(560036): /opt/observium/discovery.php: new - 0 devices discovered in 0.001 secs [2021/12/14 18:30:04 +0000] poller.php(560053): poller.php: abc-wolcott2.company.local - 1 devices polled in 2.943 secs [2021/12/14 18:30:07 +0000] poller.php(560051): poller.php: abc-lyo-sw-3.company.local - 1 devices polled in 5.134 secs [2021/12/14 18:30:07 +0000] poller.php(560049): poller.php: abc-observium.company.local - 1 devices polled in 5.509 secs [2021/12/14 18:30:12 +0000] poller.php(560047): UNIX-AGENT: Connection on tcp://abc-esx15.company.local:36602 failed. ERROR: 110 Connection timed out [2021/12/14 18:30:14 +0000] poller.php(560047): poller.php: abc-esx15.company.local - 1 devices polled in 12.67 secs [2021/12/14 13:30:14 -0500] poller-wrapper.py(560037): /opt/observium/poller-wrapper.py: processed 4 devices in 13.78 seconds with 4 threads, load average (5min) 0.13 Tony

3 2

alert box info
by Arnoldo Vidal Bravo 13 Dec '21

13 Dec '21

Hi, In the alert boxes... we can choose display a sysName or hostname?... -- Saluda cordialmente

1 0