- observium - lists.observium.org

Re: [Observium] eventlog is broke
by Tom Laermans 14 Sep '13

14 Sep '13

4492 didn't touch css, so why do you think so? :o Sent from my mobile, please excuse brevity and spelling errors. ----- Reply message ----- From: "Zach Underwood" <zunder1990(a)gmail.com> To: "Observium Network Observation System" <observium(a)observium.org> Subject: [Observium] eventlog is broke Date: Sat, Sep 14, 2013 19:48 It looks like the CSS may be broke after I updated to 4492. I have attached a screenshot -- Zach Underwood (RHCE,RHCSA,RHCT) My website My photos

4 12

eventlog is broke
by Zach Underwood 14 Sep '13

14 Sep '13

It looks like the CSS may be broke after I updated to 4492. I have attached a screenshot [image: Inline image 1] -- Zach Underwood (RHCE,RHCSA,RHCT) My website <http://zachunderwood.me> My photos <http://zunder1990.openphoto.me>

3 2

Re: [Observium] 4492
by Rob VanHooren 14 Sep '13

14 Sep '13

broke everything except frontpage for me, I rolled back to 4491 svn merge --dry-run -r 4492:4491 then svn merge -r 4492:4491 Sent from my iPhone > On Sep 14, 2013, at 13:48, observium-request(a)observium.org wrote: > > Send observium mailing list submissions to > observium(a)observium.org > > To subscribe or unsubscribe via the World Wide Web, visit > http://postman.memetic.org/cgi-bin/mailman/listinfo/observium > or, via email, send a message with subject or body 'help' to > observium-request(a)observium.org > > You can reach the person managing the list at > observium-owner(a)observium.org > > When replying, please edit your Subject line so it is more specific > than "Re: Contents of observium digest..." > > > Today's Topics: > > 1. eventlog is broke (Zach Underwood) > > > ---------------------------------------------------------------------- > > Message: 1 > Date: Sat, 14 Sep 2013 13:48:45 -0400 > From: Zach Underwood <zunder1990(a)gmail.com> > To: Observium Network Observation System <observium(a)observium.org> > Subject: [Observium] eventlog is broke > Message-ID: > <CAASSP5gtcneF-usXb4qm3sdtqCMm1iKn=6104kihsQwSa8uv2w(a)mail.gmail.com> > Content-Type: text/plain; charset="iso-8859-1" > > It looks like the CSS may be broke after I updated to 4492. I have attached > a screenshot [image: Inline image 1] > > -- > Zach Underwood (RHCE,RHCSA,RHCT) > My website <http://zachunderwood.me> > My photos <http://zunder1990.openphoto.me> >

2 1

PHPSESSID don't set
by kiribool 13 Sep '13

13 Sep '13

Hi all, I install observium on debian 6. mcrypt installed. I have a problem with PHPSESSID. If I click to some link after logon, ex. all devices, I return to logon page. I try to select "Remember me", but it not help. In google chrome I see, that cookies from observium domain are not present. PHPSESSID is empty. Please advice, how I can solve this problem. Thank all.

3 3

Auto discovery subnet
by Zalewski, Dominik 13 Sep '13

13 Sep '13

Hi, I've added below line to config.php but when I run "discovery.php -h all" it doesn't try to use snmp to find hosts on 10.0.0.0/24 $config['autodiscovery']['ip_nets'] = array("127.0.0.0/8", "10.0.0.0/24"); // Networks to permit autodiscovery What I'm doing wrong ? Thanks Dominik

3 6

AUTO: Matthew Coene is out of the office (returning 09/17/2013)
by Matthew Coene 13 Sep '13

13 Sep '13

I am out of the office until 09/17/2013. For urgent IT matters please contact one or more of the following people. Vince Annunziata - x. 42236 Eric Beard - x. 42232 Mike Martin - x. 42246 Note: This is an automated response to your message "Re: [Observium] PHPSESSID don't set" sent on 9/13/2013 3:32:27 AM. This is the only notification you will receive while this person is away.

2 1

Cisco IOS vlans counters
by Terry Sweetser 13 Sep '13

13 Sep '13

http://www.cisco.com/en/US/docs/ios/lanswitch/command/reference/lsw_s2.html… Hello Observium Community, Before I add a feature request to JIRA and/or start work on an idea I have: I'd like to discuss it here briefly. I have a cisco router terminating a QinQ trunk on a GigabitEth port, the 2 tags are actually 802.1AD "translated" to cisco `ISL', and I would like to track the bit/s t/p on each (outer) S-TAG. There's no interface that corresponds to the S-TAG only; you get the entire trunk or several thousand sub-interfaces which correspond to the C-tags. The router has no trouble at all keeping a counter on the S-TAG level vlans: ROUTER#show vlans dot1q Total statistics for 802.1Q VLAN 1179: 1043211296 packets, 392860154434 bytes input 1318271657 packets, 1413383465338 bytes output Total statistics for 802.1Q VLAN 1180: 12901924856 packets, 5689677372911 bytes input 16833259171 packets, 17373955952108 bytes output So, the 1st task would be to find the MIB, if any for these "outer" tags, and attempt to write code for an add-on to discover and graph them. Any one "been there, done that" as yet? -- http://about.me/terry.sweetser

1 0

Frontpage
by Ryan Milton 12 Sep '13

12 Sep '13

Is there a way to only show Overall traffic, not peering traffic, or "This Month"? Or how would I correct this to show properly anyway? Is it a matter of selecting the graph that I want to see and adding another line as you would do with minigraphs? [cid:image002.png@01CEAFAA.69950CC0] Regards, Ryan Milton MVS Network Manager o: 201-447-1505 x124 c: 862-249-5230 www.mvsusa.com<http://www.mvsusa.com/> [MVS final logo GOOD very small]

2 2

[observium] graphs and crontab
by Sanders, Curtis 12 Sep '13

12 Sep '13

Sorry if this has been asked already. I have scrolled thru the posts but I haven't come across the answer to my question yet. When I run ./poller-wrapper.py manually it works fine; I get graphing data for most of my devices, and the graphs show up. But if I let cron run it, nothing shows up? What am I missing? It's a clean build of Ubuntu 12.04, and Observium 0.13.9.4471. Thanks in advance, any help is appreciated. Yes, I'm a newb. :-)

1 0

Frontpage Regions
by Ryan Milton 12 Sep '13

12 Sep '13

Is the only option for the frontpage map "world"? I really only have network gear in NYC and Amsterdam, Holland. Any type of changes to regions, or map just got me an error. Is there a way of refining those displays? Regards, Ryan Milton MVS Network Manager o: 201-447-1505 x124 c: 862-249-5230 www.mvsusa.com<http://www.mvsusa.com/> [MVS final logo GOOD very small]

1 0

Added support for Ericsson SmartEdge routers
by Karl-Johan Reimann 12 Sep '13

12 Sep '13

Hi, I've added basic support for SmartEdge routers (previously known as Redback). I removed the Redback discovery file, which didn't have an entry in os.inc.php. Index: html/images/os/ericsson.png =================================================================== Cannot display: file marked as a binary type. svn:mime-type = application/octet-stream Property changes on: html/images/os/ericsson.png ___________________________________________________________________ Added: svn:mime-type + application/octet-stream Index: includes/discovery/os/seos.inc.php =================================================================== --- includes/discovery/os/seos.inc.php (revision 0) +++ includes/discovery/os/seos.inc.php (revision 0) @@ -0,0 +1,11 @@ +<?php + +if (!$os) +{ + if (strstr($sysDescr, "SmartEdge")) + { + $os = "seos"; + } +} + +?> Index: includes/discovery/os/redback.inc.php =================================================================== --- includes/discovery/os/redback.inc.php (revision 4484) +++ includes/discovery/os/redback.inc.php (working copy) @@ -1,8 +0,0 @@ -<?php - -if (!$os) -{ - if (preg_match("/Redback/", $sysDescr)) { $os = "redback"; } -} - -?> \ No newline at end of file Index: includes/definitions/os.inc.php =================================================================== --- includes/definitions/os.inc.php (revision 4484) +++ includes/definitions/os.inc.php (working copy) @@ -1270,6 +1270,14 @@ $config['os'][$os]['type'] = "firewall"; $config['os'][$os]['icon'] = "draytek"; +// SmartEdge OS + +$os = "seos"; +$config['os'][$os]['text'] = "SmartEdge OS"; +$config['os'][$os]['type'] = "network"; +$config['os'][$os]['icon'] = "ericsson"; + + foreach ($config['os'] as $this_os => $blah) { if (isset($config['os'][$this_os]['group'])) /Kalle Reimann

2 2

Requested map does not exist
by Zalewski, Dominik 12 Sep '13

12 Sep '13

Hi, I did svn up and now when I go to the front page it says "Requested map does not exist" and obviously the world map is gone. Any ideas? Thanks Dominik

2 3

Re: [Observium] Windows server issue with disk space
by Adam Armstrong 12 Sep '13

12 Sep '13

Thanks for that informationless bit of moaning. Very helpful. A++++, would waste time reading again. Adam. Brian <brian(a)mailinator.com> wrote: >I've got a windows host (SBS 2008) that isn't reporting disk space for any >of it's drives - none are over 1tb. Working fine in Cacti however. (And as >to the server 2012 part of this thread - it looks like disk space may be >gone out of server 2012's SNMP anyway) > > >_______________________________________________ >observium mailing list >observium(a)observium.org >http://postman.memetic.org/cgi-bin/mailman/listinfo/observium

4 4

search MAC in FDB
by Jordan Paschalidis 11 Sep '13

11 Sep '13

Hi, trying to use the search option in observium. If i go to FDB Tables and pick a random MAC-Address and enter it in the searchfield there is no result. Whereas when i do this with any other search-option (ipv4;MAC Address;ARP/NDP) and enter appropriately, there is an result. Tested with 0.13.8.4262 and 0.13.7.4172. Has anybody a solution for this? -- Mit freundlichem Gruß Jordan Paschalidis

1 0

Re: [Observium] Average Packet Size on Cisco-Devices
by Adam Armstrong 11 Sep '13

11 Sep '13

Probably related to lack of 64bit counters. Adam. Erik Klaassen <e.klaassen(a)fr-ix.nl> wrote: >> The graph relies on if[In|Uut][U|NU]castPkts existing on the host. If >> they're not populated, it won't work. >> >> There isn't really a fix if the devices don't expose those counters. > >Its working on our 6500, 37xx and 2960 switches. But not on some 37xx and all 3560's. >All if[In|Out][U|NU]castPkts are populated on all switches.. > >I tried to remove the .index from the mib dir, no luck. > >Erik >_______________________________________________ >observium mailing list >observium(a)observium.org >http://postman.memetic.org/cgi-bin/mailman/listinfo/observium

2 1

Unknown OS - Cisco ACS-Server
by Chris 11 Sep '13

11 Sep '13

Hello, I've got some CISCO-ACS-servers here. These appliances are linux-based systems and running a IOS-like application - with no access to the underlying OS. Anyway the SNMP agent behaves like running on a linux-server. Observium shows these Systems as "Unknown". is it possible to make the system known? currenty observium shows all "normal" linux-like graphs. (CPU/users/storage/and so on) here some snmp-vars for system detection: SNMPv2-MIB::sysDescr.0 = STRING: Cisco Secure Access Control System 5.4 SNMPv2-MIB::sysObjectID.0 = OID: SNMPv2-SMI::mib-2.47.1.1.1.1.13.1 DISMAN-EVENT-MIB::sysUpTimeInstance = Timeticks: (66748343) 7 days, 17:24:43.43 SNMPv2-MIB::sysContact.0 = STRING: user SNMPv2-MIB::sysName.0 = STRING: acs-server SNMPv2-MIB::sysLocation.0 = STRING: serverroom SNMPv2-MIB::sysServices.0 = INTEGER: 12 SNMPv2-MIB::sysORLastChange.0 = Timeticks: (3) 0:00:00.03 SNMPv2-MIB::sysORID.1 = OID: SNMP-FRAMEWORK-MIB::snmpFrameworkMIBCompliance SNMPv2-MIB::sysORID.2 = OID: SNMP-MPD-MIB::snmpMPDCompliance SNMPv2-MIB::sysORID.3 = OID: SNMP-USER-BASED-SM-MIB::usmMIBCompliance SNMPv2-MIB::sysORID.4 = OID: SNMPv2-MIB::snmpMIB SNMPv2-MIB::sysORID.5 = OID: TCP-MIB::tcpMIB SNMPv2-MIB::sysORID.6 = OID: IP-MIB::ip SNMPv2-MIB::sysORID.7 = OID: UDP-MIB::udpMIB SNMPv2-MIB::sysORID.8 = OID: SNMP-VIEW-BASED-ACM-MIB::vacmBasicGroup SNMPv2-MIB::sysORDescr.1 = STRING: The SNMP Management Architecture MIB. SNMPv2-MIB::sysORDescr.2 = STRING: The MIB for Message Processing and Dispatching. SNMPv2-MIB::sysORDescr.3 = STRING: The management information definitions for the SNMP User-based Security Model. SNMPv2-MIB::sysORDescr.4 = STRING: The MIB module for SNMPv2 entities SNMPv2-MIB::sysORDescr.5 = STRING: The MIB module for managing TCP implementations SNMPv2-MIB::sysORDescr.6 = STRING: The MIB module for managing IP and ICMP implementations SNMPv2-MIB::sysORDescr.7 = STRING: The MIB module for managing UDP implementations SNMPv2-MIB::sysORDescr.8 = STRING: View-based Access Control Model for SNMP. SNMPv2-MIB::sysORUpTime.1 = Timeticks: (1) 0:00:00.01 SNMPv2-MIB::sysORUpTime.2 = Timeticks: (1) 0:00:00.01 SNMPv2-MIB::sysORUpTime.3 = Timeticks: (1) 0:00:00.01 SNMPv2-MIB::sysORUpTime.4 = Timeticks: (3) 0:00:00.03 SNMPv2-MIB::sysORUpTime.5 = Timeticks: (3) 0:00:00.03 SNMPv2-MIB::sysORUpTime.6 = Timeticks: (3) 0:00:00.03 SNMPv2-MIB::sysORUpTime.7 = Timeticks: (3) 0:00:00.03 SNMPv2-MIB::sysORUpTime.8 = Timeticks: (3) 0:00:00.03 Do you need more details? Greetings and mni tnx in advance, Chris

1 0

Geo location shows wrong place
by Pekka.Panula＠sofor.fi 11 Sep '13

11 Sep '13

Hi Observium does not show correct geo locations on frontpage for most of our devices, servers, etc. How can i fix this? Regards, Pekka Panula

2 1

orange ports?
by Peter Childs 11 Sep '13

11 Sep '13

What are orange ports? :) 'grey' = admin down 'red' = admin up, operational down 'blue' = all good 'Orange' = ??? [cid:6FC1FA51-A367-4A67-8C97-AB35EABE0924]

2 2

Polling missed?
by Luis Quintana 11 Sep '13

11 Sep '13

Out of curiosity, where would I begin looking for any issues with missed polls or graphs not showing data for a certain period of time? I have looked under /var/log and do not see anything that stands out. I'm not sure if there are any other locations i can investigate this on. I am running ubuntu server 12.04.3 LTS. Attached are a couple of graphs you can see the gap of data not presented, or possibly missing? The weird part is, i have about 90% of my devices that show this gap, but the other 10% doesnt. Theres no specific network device/factor that would be have created this either. Any thoughts/suggestions/ideas?

3 6

display ip address
by Jordan Paschalidis 11 Sep '13

11 Sep '13

Hi Guys, ist it possible to display the IP-Address of the Devices under like "Device Information" or in the device Overview (http://x.x.x.x/devices/) ? -- Jordan Paschalidis

5 7

Windows server issue with disk space
by DaZZa 10 Sep '13

10 Sep '13

Hi. I found Observium after reading a post on Reddit (if you're out there, whoever made the post, you have my eternal thanks!), and I've got it setup and running pretty much OK, but I've run into an issue with one specific Windows host. Observium accesses and sets it up OK except for one disk volume - the drive is approximately 15 Tb in size, but Observium is only reporting it as being 8Tb, and I can't figure out why. Can anyone suggest what I may have configured incorrectly? I initially used SNMP V1 to discover/configure this host - could that be the issue, perhaps? Thanks for any input, and a huge thanks to the guys (and gals?) who write this stuff, so that those of us who can't code our way out of a wet paper bag can still satisify the demands of manglement! DaZZa

6 16

"No devices found" shown on Devices pages
by Stuart Shelton 08 Sep '13

08 Sep '13

Many of the pages beneath the "Devices" menu incorrectly display "No devices found". For example, choosing "All Devices" lists two devices, but clicking any of the controls in the '<div class="well">' segment - even the "Detail" button which is active by default - no longer shows the two devices but again reverts to "No devices found". Further down the "Devices" menu, "Servers (2)" is shown, but choosing this also displays "No devices found". Other menus, such as "Ports", appear to display all of their data correctly. This occurs with both SVN-3763 and the latest SVN-4451. When I spoke to another Observium user, they had the same issue, but no solution. Has anyone else seen this problem, or can anyone suggest anything I might do to resolve the issue? Many thanks, Stuart

2 1

Automated CSV/XCL/etc Traffic Billing Report?
by Luis Quintana 07 Sep '13

07 Sep '13

I was looking at the Traffic Billing piece and was curious to know if there is a way to setup an automated monthly report for each individual "customer" that is listed under that area? I dont seem to find anything at the moment. Would be cool to automate that and shoot out the raw data, in addition to the graphs for each individual "customer" on a monthly basis to whatever email address(s) specified. Would that ever be a feature or does anyone know how it could be accomplished?

3 4

Traffic Bill
by Maximilian Jacobsen 05 Sep '13

05 Sep '13

Hi, thanks for the development of observium! I want to use Observium to calculate the traffic of my clients. Now I have the following problem: Under "used" always "0B" is displayed. The same goes for "Over Usage" where only "-" is displayed. In the bar where the traffic usage should be displayed in percent is nothing. In the observium main directory I have found the file poll- billing.php I run it, but unfortunately nothing has happened here. I would be very grateful for a little assistance. For your information: Observium 0.13.9.4451 -- Mit freundlichen Grüßen Maximilian Jacobsen

2 1

False service down alerts
by Wijdan Mohamed 05 Sep '13

05 Sep '13

Hi, I get in the overview page false alarms that my ssh service is down since 43y 258d 19h 50m 43s, while its up and running. I get the same messages for http and smtp services in random hosts. Any idea how can I stop them? Thanks, Wijdan Mohamed Eltayeb Senior Infrastructure Engineer Infrastructure Department Tel: +249(0)183 740 840 Mob: +249(0)91 216 7725 Fax: +249-183-790864 Central Bank of Sudan Khartoum Branch Building-4th floor Osman Digna Street P.O.Box 12595- Khartoum - Sudan <http://www.ebs-sd.com/> www.ebs-sd.com P Please consider the environment before printing this email.

2 1

is_file() usage for rrd file existance
by Peter Childs 05 Sep '13

05 Sep '13

Gday folks. I'm fiddling around with remote RRD storage via rrdcached. Most of the rrdtool stuff is wrapped in includes/rrdtool.inc.php which is wonderful from this perspective. Not within this include is the usage of is_file() to determine the existence of an rrd file. In discovery the pattern is something like If( ! is_file( some.rrd ) ) { rrdtool_create ( … )} In graphing the pattern is something like If ( is_file( some.rrd ) { graph some stuff… } Would there be any support for moving this usage into a rrdtool_file_exists( ) thin wrapper for is_file ? This would make it much easier to extended includes/rrdtool.inc.php to support storage of RRD's on remote storage (and potentially distribute over multiple remote storage devices ..) Thoughts? I had a quick check for usage of scandir/readdir to determine all the rrd's in a 'device' directory, but this doesn't seem to be a common pattern. My other evil thought is to use rename_function/override_function to work around this, but it seems very very WRONG. Cheers, Peter

3 8

Re: [Observium] Cisco LWAPP info
by Adam Armstrong 04 Sep '13

04 Sep '13

At the moment we don't really have much specifoc wireless support at all. Adding it involves writing code. Adam. Sturla Þórsson <stullith(a)gmail.com> wrote: >_______________________________________________ >observium mailing list >observium(a)observium.org >http://postman.memetic.org/cgi-bin/mailman/listinfo/observium

1 0

Re: [Observium] Switch HP Procurve 3800
by Daniel Fankhauser 04 Sep '13

04 Sep '13

OK, I ran an update from Observium 0.13.9.4449 to Observium v0.13.9.4450 Now 2 hours later, the problem is solved! The device is now recognized as: HP ProCurve KA.15.09.0009 Thank you very much. U made my day. Daniel -----Ursprüngliche Nachricht----- Von: Mike Stupalov [mailto:landy2005@gmail.com] Gesendet: Mittwoch, 4. September 2013 17:33 An: Daniel Fankhauser Betreff: Re: [Observium] Switch HP Procurve 3800 On 04.09.2013 19:17, Daniel Fankhauser wrote: > Hi Mike > > Thanks. I did so (snmpwalk -v2c -Ovqn -c rocommunity ip-address sysObjectID) and the response is: > > Response: .1.3.6.1.4.1.11.2.3.7.8.5.2 Check latest revision (r4450). > > Daniel > > > -----Ursprüngliche Nachricht----- > Von: Mike Stupalov [mailto:landy2005@gmail.com] > Gesendet: Mittwoch, 4. September 2013 17:12 > An: Observium Network Observation System > Cc: Daniel Fankhauser > Betreff: Re: [Observium] Switch HP Procurve 3800 > > On 04.09.2013 19:03, Daniel Fankhauser wrote: >> Hi All >> >> I have a new HP Procurve 3800 switch stack which is recognized as >> "generic device" only. >> >> The device information show as: >> "HP Stack, revision KA.15.09.0009, ROM KA.15.06 >> (/ws/swbuildm/KA_rel_hartford_qaoff/code/build/tam(KA_rel_hartford_qaoff >> )) (Formerly ProCurve)" >> >> Does anyone have an idea how I could fix this? > > show: > snmpwalk -v2c -Ovqn -c <community> <device> sysObjectID > >> >> Thank you >> >> Daniel >> >> >> >> _______________________________________________ >> observium mailing list >> observium(a)observium.org >> http://postman.memetic.org/cgi-bin/mailman/listinfo/observium >> > > -- Mike Stupalov

1 0

Cisco LWAPP info
by Sturla Þórsson 04 Sep '13

04 Sep '13

Hi all, I got a Cisco AIR-CT5508-K9 WLC controlling our LWAPP's and I was wondering if there's any way to get info on the LWAPP's in Observium? With kind regards, Sturla Thorsson

1 0

Switch HP Procurve 3800
by Daniel Fankhauser 04 Sep '13

04 Sep '13

Hi All I have a new HP Procurve 3800 switch stack which is recognized as "generic device" only. The device information show as: "HP Stack, revision KA.15.09.0009, ROM KA.15.06 (/ws/swbuildm/KA_rel_hartford_qaoff/code/build/tam(KA_rel_hartford_qaoff )) (Formerly ProCurve)" Does anyone have an idea how I could fix this? Thank you Daniel

2 2

Raritan PDU MIB support
by Glen Whittle 04 Sep '13

04 Sep '13

Would it be possible for MIBS for the Raritan metered PDU's to be added to Observium I have attached the MIBS from the device. Kind Regards, [cid:interactive_logo27dd.jpg]<http://www.interactivesa.co.za/> Glen Whittle | Solutions Architect ________________________________ Tel: +27 31 538 4132 Fax: +27 31 538 4970 Mobile: +27 81 394 2540 | www.interactivesa.co.za<http://www.interactivesa.co.za> [cid:spacer2abd.jpg] [cid:facebook6d63.png]<http://www.facebook.com/BlakeHoldings> [cid:twitter1792.png]<http://www.twitter.com/blake_tweets> [cid:youtube6cb.jpeg]<http://www.youtube.com/watch?v=IcRXpUG6SvU&feature=youtu.be> [cid:map633f.png]<http://www.blake.co.za/contacts/> ________________________________ Disclaimer The information contained in this communication from the sender is confidential. It is intended solely for use by the recipient and others authorized to receive it. If you are not the recipient, you are hereby notified that any disclosure, copying, distribution or taking action in relation of the contents of this information is strictly prohibited and may be unlawful.

2 1

Dbm sensors and interface names
by Benjamin Abadie 03 Sep '13

03 Sep '13

Hi, I'm watching the dBm sensors on a Brocade host, and I notice that on /health/metric=dbm/ and /device/device=X/tab=health/metric=dbm/ there is no sign of the port related to the values being displayed. See screenshots : http://i.imgur.com/UO0L74k.png http://i.imgur.com/39AnD2i.png Is this brocade specific ? If you need to try a patch, I'm available. Regards, Benjamin

2 3

observium Syslog not recieving syslog msgs
by Glen Whittle 03 Sep '13

03 Sep '13

Hi, I have been unable to get the syslog function to work and I can't find any info online that is helping I am just getting the follwoing msg on the webpage No syslog entries found! This device does not have any syslog entries. Check that the syslog daemon and Observium configuration options are set correctly, that this device is configured to send syslog to Observium and that there are no firewalls blocking the messages. See documentation<http://www.observium.org/wiki/Category:Documentation> and configuration options<http://www.observium.org/wiki/Configuration_Options#Syslog_Settings> for more information. it may be something simple that I have missed (have followed the documentation on the website ) see far below for my syslog-ng.conf, syslog.php and config.php So far I have tested and my server is receiving syslog msg form my cisco devices I tested this by changing the destination d_observium to output to a file rather than "program("/opt/observium/syslog.php" template ("$HOST||$FACILITY||$PRIORITY||$LEVEL||$TAG||$YEAR-$MONTH-$DAY $HOUR:$MIN:$SEC||$MSG||$PROGRAM\n") template-escape(yes)); which worked beautifully any help would be appreciated. ---------------------config.php------------------- <?php ## Have a look in includes/defaults.inc.php for examples of settings you can set here. DO NOT EDIT defaults.inc.php! // Database config $config['db_host'] = "localhost"; $config['db_user'] = "root"; $config['db_pass'] = "7:5Rs-W1"; $config['db_name'] = "observium"; // Location $config['install_dir'] = "/opt/observium"; // Thie should *only* be set if you want to *force* a particular hostname/port // It will prevent the web interface being usable form any other hostname #$config['base_url'] = "http://observium.company.com"; // Default community list to use when adding/discovering $config['snmp']['community'] = array("public"); // Authentication Model $config['auth_mechanism'] = "mysql"; // default, other options: ldap, http-auth, please see documentation for config help // Enable alerter // $config['poller-wrapper']['alerter'] = TRUE; $config['enable_sla'] = 0; # Enable Cisco SLA collection and display //frontpage map $config['frontpage']['map']['region'] = "ZA"; $config['frontpage']['map']['resolution'] = "provinces"; $config['frontpage']['map']['dotsize'] = 5; $config['frontpage']['map']['realworld'] = false; $config['enable_syslog'] = 0; $config['syslog_filter'] = array("last message repeated", "Connection from UDP: [", "ipSystemStatsTable node ipSystemStatsOutFragOKs not implemented", "diskio.c: don't know how to handle"); ## Ignore some crappy stuff from SNMP daemon // End config.php -----------------syslog.php----------------------------- #!/usr/bin/env php <?php /** * Observium * * This file is part of Observium. * * @package observium * @subpackage syslog * @author Adam Armstrong <adama(a)memetic.org> * @copyright (C) 2006 - 2012 Adam Armstrong * */ include("includes/defaults.inc.php"); include("config.php"); include("includes/definitions.inc.php"); include("includes/syslog.php"); include("includes/dbFacile.php"); include("includes/common.php"); include("includes/functions.php"); $i = "1"; $s = fopen('php://stdin','r'); while ($line = fgets($s)) { //logfile($line); // host || facility || priority || level || tag || timestamp || msg || program list($entry['host'],$entry['facility'],$entry['priority'], $entry['level'], $entry['tag'], $entry['timestamp'], $entry['msg'], $entry['program']) = explode("||", trim($line)); process_syslog($entry, 1); unset($entry); unset($line); $i++; } ?> -------------------------syslog-ng.conf----------------------- @version: 3.3 @include "scl.conf" options { chain_hostnames(0); keep_hostname(1); use_dns(no); }; ######################## # Sources ######################## source s_net { udp(); }; ######################## # Destinations ######################## destination d_observium { program("/opt/observium/syslog.php" template ("$HOST||$FACILITY||$PRIORITY||$LEVEL||$TAG||$YEAR-$MONTH-$DAY $HOUR:$MIN:$SEC||$MSG||$PROGRAM\n") template-escape(yes));}; ######################## # Filters ######################## ######################## # Log paths ######################## log { source(s_net); destination(d_observium); }; @include "/etc/syslog-ng/conf.d/" Kind Regards, [cid:interactive_logo2f3d.jpg]<http://www.interactivesa.co.za/> Glen Whittle | Solutions Architect ________________________________ Tel: +27 31 538 4132 Fax: +27 31 538 4970 Mobile: +27 81 394 2540 | www.interactivesa.co.za<http://www.interactivesa.co.za> [cid:spacer20b6.jpg] [cid:facebook63e1.png]<http://www.facebook.com/BlakeHoldings> [cid:twitter74cb.png]<http://www.twitter.com/blake_tweets> [cid:youtubef39.jpeg]<http://www.youtube.com/watch?v=IcRXpUG6SvU&feature=youtu.be> [cid:map31e.png]<http://www.blake.co.za/contacts/> ________________________________ Disclaimer The information contained in this communication from the sender is confidential. It is intended solely for use by the recipient and others authorized to receive it. If you are not the recipient, you are hereby notified that any disclosure, copying, distribution or taking action in relation of the contents of this information is strictly prohibited and may be unlawful.

1 0

Chart for traffic percentage
by Rofiq Yuli 03 Sep '13

03 Sep '13

Hi Can anyone show me how to display port Traffic % chart in observium, for hourly/daily/weekly chart ? (Traffic %, not Traffic bits). I've searched on the observium demo and can't find it. Regards Rofiq Yuli

1 0

Re: [Observium] [Observium-dev] r4418 - in observer/trunk: . attic html/pages includes/discovery
by Tom Laermans 02 Sep '13

02 Sep '13

On 09/02/2013 04:25 PM, observium-commits(a)observium.org wrote: > Author: adama > Date: 2013-09-02 16:25:32 +0200 (Mon, 02 Sep 2013) > New Revision: 4418 > > Modified: > observer/trunk/attic/scan-snmp.php > observer/trunk/html/pages/addhost.inc.php > observer/trunk/includes/discovery/functions.inc.php > Log: > addhost -> add_device, delhost -> delete_device, renamehost -> rename_device, addHost() -> add_device() > svn up -r 4416 includes/discovery/functions.inc.php to regain working Observium. Tom

3 3

is discovery.php broken?
by Zach Underwood 02 Sep '13

02 Sep '13

When I run "/opt/observium/discovery.php -h all" I get no output. This morning the command was working. running version 4419 -- Zach Underwood (RHCE,RHCSA,RHCT) My website <http://zachunderwood.me> My photes <http://zunder1990.openphoto.me>

1 0

Re: [Observium] Sensors & syslog Questions
by w.mohamed＠ebs-sd.com 01 Sep '13

01 Sep '13

4 6

Re: [Observium] Disabling 'Remember Me'
by Tom Laermans 31 Aug '13

31 Aug '13

Pretty sure you are not running the latest version of observium, please svn up before reporting already fixed bugs. Sent from my mobile, please excuse brevity and spelling errors. ----- Reply message ----- From: "Scott A. Davis" <scott.a.davis(a)gmail.com> To: "Observium Network Observation System" <observium(a)observium.org> Subject: [Observium] Disabling 'Remember Me' Date: Fri, Aug 30, 2013 23:50 That fixed it ... Thank you for your help!! --- scott a davis scott.a.davis [at] gmail [dot] com On Fri, Aug 30, 2013 at 4:00 PM, Niklas Larsson <niklas(a)tese.se> wrote: Hi, bug i php-mcrypt - edit /etc/php.d/mcrypt.ini and change it to: ; Enable mcrypt extension module extension=mcrypt.so and restart httpd /niklas Scott A. Davis skrev 2013-08-30 22:48: Hi! After updating a week or two ago (after the security update), I installed php-mcrypt on my CentOS node. I also (for good measure, added the disable command (below) in the config.php. Restarted Apache, cleared cache, used multiple browsers, etc ... I still get the following notice/warning at the top of the screen when I log in. Observium now requires mcrypt to be installed for use by the "remember me" function. Please install the php5-mcrypt package on Ubuntu/Debian or the php-mcrypt package on RHEL/Centos. Alternatively, you can disable this feature by setting $config['login_remember_me'] = FALSE; in your config. Am I missing something? I just need to have it effectively disabled. Thanks in advance. --- scott a davis scott.a.davis [at] gmail [dot] com _______________________________________________ observium mailing list observium(a)observium.org http://postman.memetic.org/cgi-bin/mailman/listinfo/observium _______________________________________________ observium mailing list observium(a)observium.org http://postman.memetic.org/cgi-bin/mailman/listinfo/observium

1 0

pach some errors (was Re: Front Page)
by Rob J. Epping 31 Aug '13

31 Aug '13

Hi On Fri, Aug 30, 2013 at 4:48 PM, Adam Armstrong <adama(a)memetic.org> wrote: > > php -l config.php That made me run the following shell one-liner. for x in `find -name ".svn" -prune -o -type f -name "*php*" -print`; do php -l $x; done | grep -v "^No syntax errors detected in " The result (including patch) is in <http://jira.observium.org/browse/OBSERVIUM-474> -- GRTNX, RobJE

2 2

Disabling 'Remember Me'
by Scott A. Davis 31 Aug '13

31 Aug '13

Hi! After updating a week or two ago (after the security update), I installed php-mcrypt on my CentOS node. I also (for good measure, added the disable command (below) in the config.php. Restarted Apache, cleared cache, used multiple browsers, etc ... I still get the following notice/warning at the top of the screen when I log in. Observium now requires mcrypt to be installed for use by the "remember me" function. Please install the php5-mcrypt package on Ubuntu/Debian or the php-mcrypt package on RHEL/Centos. Alternatively, you can disable this feature by setting $config['login_remember_me'] = FALSE; in your config. * * Am I missing something? I just need to have it effectively disabled. Thanks in advance. --- - scott a davis - scott.a.davis [at] gmail [dot] com

3 3

Front Page
by Ryan Milton 30 Aug '13

30 Aug '13

I am looking to spice up my frontpage and am currently adding the minigraphs. Is there a way in the config to name each graph as opposed to a custom name for the field? How about with the legends, to select what is shown in the legend, so that they aren't 3x's as large as the graph itself? Regards, Ryan Milton Network Manager o: 201-447-1505 x124 c: 862-249-5230

7 15

rrd query...
by Peter Childs 30 Aug '13

30 Aug '13

Am I reading this correctly... defaults.inc.php:$config['rrd_rra'] = " RRA:AVERAGE:0.5:1:2016 RRA:AVERAGE:0.5:6:2976 RRA:AVERAGE:0.5:24:1440 RRA:AVERAGE:0.5:288:1440 "; So for a step of '300' (5 mins) we have 1 PDP @ 300seconds = 5 mins (x 2016) = 7 days of 5 minute intervals 6 PDPs @ 300seconds = 30mins (x 2976) = 62 days? 2 months? (of 30min averages) 24 PDPs @ 300seconds = 2 hour (x 1440) = 120 days (of 2 hour averages) 288 PDPs @ 300 seconds = 24 hours (x 1440) = 4 years? (of 1 day averages..) Cheers, Peter

2 1

Tape Drive and library DELL ML6000 not recognised
by Mihai - Cristian Satmarean 30 Aug '13

30 Aug '13

Hi, as I've seen there are a lot of DELL devices recognised properly, is there a chance that also Dell PoWerValut ML 6000 would be recognised? Thank you!

1 0

User Creation Failed?
by Luis Quintana 29 Aug '13

29 Aug '13

I have been looking around to see what could be the problem for this. I installed a new copy of observium on ubuntu and have followed the instructions given. When I get to the area to create a user by leveraging ./adduser.php , i get a messages stating the User creation failed. Is there something I am overlooking when i do this or some data i can provide or look at that can pinpoint me in the right/general direction?

1 0

update to the apps page
by Zach Underwood 29 Aug '13

29 Aug '13

Can we get some info about BIND added to http://www.observium.org/wiki/Applications -- Zach Underwood (RHCE,RHCSA,RHCT) My website <http://zachunderwood.me> My photes <http://zunder1990.openphoto.me>

2 1

Kernel version looping events
by Robert Williams 29 Aug '13

29 Aug '13

Hi, Since the auto SVN / discover at 06:00 (BST) today, several of our servers are logging repeated events as follows: 2013-08-29 09:10:25 System kernel -> 2.6.32-71.18.1.el6-0.20.smp.gcc4.1.x86_64 It appears to be occurring on every 5 minute poll: [cid:image001.png@01CEA499.4E1120E0] This is only affecting machines which run pre-configured (static, non-updating) software such as OpenFiler which is the target in the example above. Also at the first poll after 06:00 today, most of the other linux boxes logged events similar to the above, but, they logged it just once and then stopped. I’ve got no idea why / how this would be logged continuously, especially as the result is identical each poll, so any pointers welcome :) Cheers! Robert Williams Custodian Data Centre Email: Robert(a)CustodianDC.com http://www.CustodianDC.com

3 7

Re: [Observium] asa hostname chk
by Rob VanHooren 29 Aug '13

29 Aug '13

they're an ASA pair, the on-device hostname/sysName is always sync'd to be same same dns for the m0's can be (is) unique/different. wrapper logic on the addhost check to allow dup sysName if box (via e.g. sysDescr or sysObjectID) is ASA? dunno. R. Sent from my iPhone > > > > you have obviously same hostname on devices. > > what show these commands: > # sh run | i hostname > # sh run | i domain-name > > -- > Mike Stupalov > >

1 0

@mike re: r4382, still grief // dup sysName
by Rob VanHooren 29 Aug '13

29 Aug '13

> ! vfw01a is the active ASA, addr .201; unique fqdn > ! vfw01b is the standby ASA addr .202; unique fqdn > > [root@nmis observium]# ./addhost.php csco-vfw01b theCommunity v2c > Trying v2c community ... > Already got device with SNMP-read sysName (CSCO-VFW01.adomain.com) > Could not reach csco-vfw01b with given SNMP community using v2c > Observium v0.13.8.4386 > >

2 1

How can i add app mysql to my observium
by Robert Luczynski 29 Aug '13

29 Aug '13

Hello I have a CentOS 6.4 I want to add app tab to my observium. I was folllow in aplication mysql: http://www.observium.org/wiki/Application/MySQL Unix agent is enabled: root@g [/opt/observium]# telnet localhost 36602Trying ::1... Connected to localhost. Escape character is '^]'. Connection closed by foreign host. mysql script work ok: root@g [/opt/observium]# /usr/lib/observium_agent/local/mysql <<<mysql>>> a0:5225549 a1:2200 a2:105805 a3:52579 a4:3774 a5:211779660 a6:1 a7:1 a8:-1 a9:-1 aa:8192 [...] ef:-1 eg:0 eh:1844224 ei:8388608 ej:3176 ek:890 puller info: ./poller.php all August 28, 2013, 9:49 - 1 devices polled in 0.739 secs MySQL: Cell[0/0s] Row[4/0s] Rows[30/0.01s] Column[0/0s] Update[22/0.01s] Insert[2/0.01s] Delete[0/0s] Thanks, Robert

4 6

Average Packet Size on Cisco-Devices
by Chris 29 Aug '13

29 Aug '13

Hi There, I like seeing the Average Packet Size on Ports since 4361. But unfortunately I don't have data in graphs for all devices. It's working on: - 6500 VSS (Ten/Gig/Vlan/Po) (IOS 15.0) - ASA 55xx - Servers (Linux) - Riverbeds (Linux) - Cisco-WLAN-Controllers It's NOT working (empty graph) on: - 4500 (Ten/Gig/Po) - ASR1001 (Gig/Tu) (IOS 15.3S) - 7301 (Gig/Tu) (IOS 15.1M) - 28xx (Gig/Tu) (IOS 15.0M) - 18xx (Fa/Tu) (IOS 12.4T) Especially on our VPN-Rouers (73/28/ASR) this would be helpful. How can I debug some more things to get it working? Or how can I support you with information that you get it to work? Many thanks in advance, Chris

3 4