- observium - lists.observium.org

Unable to create web links to Watchdog monitors`
by Joe Brouillette 29 Oct '21

29 Oct '21

Good afternoon, I am trying to create a web page with links to our Watchdog environment monitors and not having any luck. I am using the same syntax I used with the Observium server I had last year and all I'm getting is a pink rectangle with No Auth at the top and the Date/Time indicators at the bottom. I can copy my links and put them in the address bar of my browser and the temperature graph pops right up. I did add the $config['allow_unauth_graphs'] = 0; line to my config.php file. I've been going over my settings and I can't figure this out. What am I doing wrong? I'm running Observium Professional 21.10.11678. Thanks, Joe Brouillette IT Specialist Link Transit 509.664.7643 jobee(a)linktransit.com<mailto:jobee@linktransit.com> "Any sufficiently advanced science looks like magic." - Arthur C. Clarke "All magic comes with a price." - Rumplestiltskin [Logo1]

2 6

ping only
by Toky ANDRIANASOLO 28 Oct '21

28 Oct '21

Hello, There are some devices that are not under our administration but need to be monitored by ping only (without snmp discovery) for reachability information, would it be possible please? Thank you and regards, Toky

4 3

Hosts showing with _gateway
by Brad Bendy 28 Oct '21

28 Oct '21

Hi, Ive been chasing this problem for hours and see what is going on, no clue why. I have a host that is in DNS and added to Observium, syslog is not being collected. Digging around more I also see a _gateway device in Observium (I have never added this). This device actually appears to be the one I am having issues with. I removed the device and readded, it polls the device once it looks then the rrds area created as _gateway and not the actual device name, so that's why the GUI is not showing anything I am guessing. In this install the gateway is the same firewall that I am trying to add that is showing up as _gateway. We have no _gateway anywhere in the config and nothing in the local hosts file or DNS. So I am a lost as to what is going on here. Has anyone seen this or have a clue what is going on?? Thanks

3 7

Dell OpenManage / Monitor
by ron＠rjr-services.com 27 Oct '21

27 Oct '21

Howdy Dev team, Was doing some digging into the /includes/mibs/dell.inc.php and found the section on $mib = 'MIB-Dell-10892'; $config['mibs'][$mib]['enable'] = 1; $config['mibs'][$mib]['identity_num'] = '.1.3.6.1.4.1.674.10892.1'; With a number of sub-items. As Dell have been releasing newer versions of OpenManage and Dell Command|Monitor, they have been migrating away from the 10892 mib, and are now using the 10909 mib. Just did a comparison walk on two different machines with different versions of OM agent, and have the following results: SNMPv2-SMI::enterprises.674.10892.1.300.10.1.9.1 = STRING: "Precision WorkStation T3500 " SNMPv2-SMI::enterprises.674.10909.1.300.10.1.9.1 = STRING: "Precision T7610" Of course the former machine doesn't have anything on 10909, and the latter has nothing on 10892. Sometime back, I pulled down MIB-Dell-10909 and dropped it into $OBSERVIUM_HOME/mibs/dell, but I haven't tried hacking on any of the php files anywhere... but it leads the question of whether it would be a "low-hanging fruit" type of change or if it would be something more substantial. Regards, Ron -- This message has been scanned by E.F.A. Project and is believed to be clean.

2 1

Best way to mass disable certain MIBs per device
by Brad Bendy 25 Oct '21

25 Oct '21

Hi, Easy way to do this? I have a ton of firewalls that support BGP but non running BGP and from the logs looks like that times out quite a bit, would like to just disable that. Is there a safe way to just do it in database and not break anything else? Thanks

2 1

Device first discovery date
by Attila Nagy 22 Oct '21

22 Oct '21

Hi Everyone! Is there a way to find out the date of the "first contact" with a device from Observium? I mean for example the date when the first discovery was run on a specific device, or something like this? (Currently the device's event log runs out after half a year.) Any ideas? Regards, Tylla

3 4

Certificate error
by Fred Sharpsteen 22 Oct '21

22 Oct '21

I have a school I was working with the other day and they were getting certified errors when trying to get the latest community edition. We were able to download it with wget --no-check-certificate is this normal?

2 1

Observium-Netflow
by Toky ANDRIANASOLO 21 Oct '21

21 Oct '21

Hello, Is observium able to integrate Netflow? Thank you and Regards, --

2 1

User AD integration
by Toky ANDRIANASOLO 19 Oct '21

19 Oct '21

Hello, Can we please integrate user Observium with users in Active Directory/ LDAP Thank you and Regards, Toky

3 4

Map alerts
by Fred Sharpsteen 19 Oct '21

19 Oct '21

Is there a setting to make all the red alerts appear on the map as the top Icon sometimes, a place with multiple devices, the Red Alert Icon shows up under the green ones?

2 1

Search is only showing ethernet ports not devices.
by Mark Rowlands 15 Oct '21

15 Oct '21

Observium 21.10.11667 (13th October 2021) OS Linux 5.4.0-86-generic [amd64] (Ubuntu 20.04) Apache 2.4.41 (Ubuntu) PHP 7.4.3 (OPcache: ENABLED) (Memory: 128MB) Python 3.8.10 MySQL 8.0.26-0ubuntu0.20.04.2 (extension: mysqli 7.4.3) SNMP NET-SNMP 5.8 RRDtool 1.7.2 (rrdcached 1.7.2: unix:/var/run/rrdcached.sock) Fping 4.2 (IPv4 and IPv6) The search device page works. But the quick search is now only showing ethernet ports ☹

3 6

Port IfStatus is missing on associaction rule set
by Edvinas Kairys 14 Oct '21

14 Oct '21

Hello, Seems like Port IfStatus is missing. On older version checkers - i can type it by hand, but here i could not find it. [image: image.png]

3 3

Mysql binary log files full hd
by Jay Hanke 12 Oct '21

12 Oct '21

We've got a server running subscription observium and inadvertently had our mysql binary logging settings not optimized and filled the drive. Mysql won't start to run the recovery process due to the full drive. Server is only running observium. Is it safe to manually delete some of the old binlog files to get mysql to start and then run the cleanup in mysql or would I lose observium info? Thanks! Jay

2 2

Re: [Observium] contact regarding issues with Professional Subscription
by Adam Shaheraz (SE) 12 Oct '21

12 Oct '21

I have updated card details for wrong user account (account was inactive) which made charges for past 3 years from 2018-2019, 2019-2020, 2020-2021. Can you please let me know how these transactions can be reverted and update the user account we currently use. Regards, Adam Shaheraz -------- Original message -------- From: Adam Armstrong via observium <observium(a)observium.org> Date: 10/12/21 15:52 (GMT+05:00) To: 'Observium' <observium(a)observium.org> Cc: Adam Armstrong <adama(a)observium.org> Subject: Re: [Observium] contact regarding issues with Professional Subscription What is the issue? Thanks, Adam. From: observium <observium-bounces(a)observium.org> On Behalf Of Adam Shaheraz (SE) via observium Sent: 12 October 2021 11:50 To: observium(a)observium.org Cc: Adam Shaheraz (SE) <shaheraz_a(a)dhiraagu.com.mv> Subject: [Observium] contact regarding issues with Professional Subscription Hi, Is there an email contact regarding issue with Professional Subscription? Regards, Adam Shaheraz

1 0

contact regarding issues with Professional Subscription
by Adam Shaheraz (SE) 12 Oct '21

12 Oct '21

Hi, Is there an email contact regarding issue with Professional Subscription? Regards, Adam Shaheraz

2 1

Cert error on https://www.observium.org/
by Martin 07 Oct '21

07 Oct '21

It looks yesterday a wrong certificate has been loaded on the Observium website: Firefox does not trust this site because it uses a certificate that is not valid for www.observium.org. The certificate is only valid for observium.org. Error code: SSL_ERROR_BAD_CERT_DOMAIN Martin

3 3

Observium HA
by Toky ANDRIANASOLO 05 Oct '21

05 Oct '21

Hello, we just installed a new second observium on a separated server located in another site to ensure monitoring service high availability. these are set with two different IP and the primary server is supposed to do system and Mysql replication to the second server every day so that we always have a same data level on both. Could you please guide us on that? Thank you and Regards, Toky

4 7

Delete device's ports
by Toky ANDRIANASOLO 05 Oct '21

05 Oct '21

Hello, After adding one switch device for example, all ports are monitored, most of them are unused. Could you please help us on how to delete ports Thank you and Regards, Toky

2 1

Re: [Observium] Event log showing 'changed' entries every 5 minutes
by Adam Armstrong 04 Oct '21

04 Oct '21

Looks like a failed sql query, a debugged poll on this device would probably show why: ./poller.php -h <device_id> -d -r Adam. Sent from my iPhone > On 4 Oct 2021, at 15:15, Adam Armstrong <adama(a)observium.org> wrote: > > Looks like a failed sql query, a debugged poll on this device would probably show why: > > ./poller.php -h <device_id> -d -r > > Sent from my iPhone > >>> On 4 Oct 2021, at 15:13, Richard Kuhns via observium <observium(a)observium.org> wrote: >>> >> Hello, >> >> We're running Observerium Professional 21.10.11636. >> >> Every 5 minutes the same 'changed' entries show up in the event log (screenshot below). The device in question is a Cisco ASR9K. Browsing to the device's page it looks like the changes below aren't actually be applied (no serial number listed, hardware is generic). >> >> How can I go about fixing this? >> >> Thanks in advance! >> >> >> -- >> Richard Kuhns <rjk(a)wintek.com> >> Systems Administrator >> Wintek Powered by Tipmont >> >> Main: 765-742-8428 >> Direct: 765-269-8541 >> _______________________________________________ >> observium mailing list >> observium(a)observium.org >> http://postman.memetic.org/cgi-bin/mailman/listinfo/observium

3 3

Adding MIB
by Nick Her 04 Oct '21

04 Oct '21

Hello, I'm a system admin and I'm new to Observium. I've use other monitoring tools in the past, but deploying my own monitoring tool is all new to me. My plan is to test out the waters and possibly implement Observium to our corporate LAN/WAN consisting of approximately 250 devices. I've got 13 core devices responding and polling is working via SNMPv3. I'm getting a lot of useful data from my core switches. One important data I need is DHCP server information (mac address binding/IP address leases) from our HP switches. These core switches have multiple functions and one of those function is DHCP server. I need to be able to pull this DHCP server data and retain it for a period of time. Maybe send it to a syslog server. My problem is the MIB (HP-ICF-DHCPV4-SEVRER-MIB) is missing from my Observium install. I've been searching for a couple of hours and have not found a good starting point on how to add this MIB. I see that simply coping the MIB into the Observium install directory isn't the complete process. On your FAQ, the answer to "Vendor specific MIB" was very vague and was not very helpful. Can someone give me a brief run down of what I need to do to get this MIB working? What resources to read for more understanding of the MIB process. I'm sure someone's asked this question before, sorry if I'm repeating the question. Thank You,Nick

2 1

Event log showing 'changed' entries every 5 minutes
by Richard Kuhns 04 Oct '21

04 Oct '21

Hello, We're running Observerium Professional 21.10.11636. Every 5 minutes the same 'changed' entries show up in the event log (screenshot below). The device in question is a Cisco ASR9K. Browsing to the device's page it looks like the changes below aren't actually be applied (no serial number listed, hardware is generic). How can I go about fixing this? Thanks in advance! -- Richard Kuhns <rjk(a)wintek.com> Systems Administrator Wintek Powered by Tipmont Main: 765-742-8428 Direct: 765-269-8541

1 0

Problems with Checkpoint Gaia interface naming
by Hofer, Elmar (BITBW) 04 Oct '21

04 Oct '21

Dear List-Users, maybe someone can help me with my problem as it seems to happen quite often. Checkpoint uses different names in the ifDescr and ifNames field. The correct interface names are in the ifNames field. Now Observium uses the ifDescr field to display the interface names, because normally both fields have the same conntent. I'm lokking for an option to change this behaviar. It would be great to get an hint where to look for this problem to resolve. Thanks for your help. Yours Elmar

2 5

New Community Edition 21.10 Release
by adama＠observium.org 02 Oct '21

02 Oct '21

We've released Community Edition 21.10. Includes 903 commits and a very large number of changes. Upgrade using our docs: https://docs.observium.org/updating/#upgrade-to-latest-major-release Requirements: PHP7.1, MySQL 5.6.5/MariaDB 10.0, RRDTool 1.6. Raw changelog at https://www.observium.org/svn.log

1 0

load new mibs
by Luis Olavarrieta 01 Oct '21

01 Oct '21

Guys, how do I load mibs not listed in the /mibs folder? We have a project where we will be monitoring IP camaras, and I can see that dahua is listed there, but not the ones we will be using. I requested the info to the manufacturer and they just sent the OID definition in an excel and they will be sending the mibs file later Please advice Thanks!

2 1

Change password to the client area page
by Daniel Johansson 29 Sep '21

29 Sep '21

Hi How do you change the password for the client area on observium.org? Are there any function for that I can use myself or does this need to be done centrally? ---- Regards Daniel

1 0

unending disk space growth?
by Adam Thompson 27 Sep '21

27 Sep '21

Since we last rebuilt our Observium instance in late 2019, we've noticed that it's chewing up disk space at a prodigious rate, that we didn't see before. We're seeing a steady ~300BG/month increase in storage needs. Observium, of course, monitors itself, and the line on the storage graph is a nearly-perfect slope (after adjusting for disk size increases). This came to my attention this morning (again), when we ran out of disk space (again) and I had to expand the volume (again) to continue operating. (So much for our alerting... oops.) We have added a few new devices, but not 1TB worth, and not consistently and constantly since late 2019. Since RRD files are - in theory - fixed-size, why does /opt/obvservium/rrd keep growing without bound? And how can I predict future growth? Will it ever stop? Help? Anyone? -Adam Adam Thompson Consultant, Infrastructure Services [1593169877849] 100 - 135 Innovation Drive Winnipeg, MB, R3T 6A8 (204) 977-6824 or 1-800-430-6404 (MB only) athompson(a)merlin.mb.ca<mailto:athompson@merlin.mb.ca> www.merlin.mb.ca<http://www.merlin.mb.ca/>

5 5

Re: [Observium] Ubuntu network issue
by Lyndon Labuschagne 26 Sep '21

26 Sep '21

Hi This is an Ubuntu configuration issue not an Observium one, You would be better off checking some Ubuntu support communities for an answer to your question. From: observium <observium-bounces(a)observium.org> on behalf of "Almutawa, Abdulrhman F via observium" <observium(a)observium.org> Reply to: Observium <observium(a)observium.org> Date: Sunday, 26 September 2021 at 06:49 To: Observium <observium(a)observium.org>, observium <observium-bounces(a)observium.org>, Adam Armstrong <adama(a)observium.org> Cc: "Almutawa, Abdulrhman F" <abdulrhman.almutawa(a)aramco.com> Subject: Re: [Observium] Ubuntu network issue Classification: Saudi Aramco: Company General Use This is a kind reminder please! Please support me to resolve the below issue. Best regards This email has been classified as Saudi Aramco: Company General Use on 9/26/2021 7:48 AM From: Almutawa, Abdulrhman F Sent: Tuesday, September 21, 2021 2:19 PM To: Observium <observium(a)observium.org> Subject: FW: Ubuntu network issue Classification: Saudi Aramco: Company General Use Hello Observium, Can you please support me with the below request? Best regards Almutawa, Abdulrahman F.Industrial Computer Engineer III CRDD, Engineering DivisionTechnical Support Unit Tel. +966 11 285 6371Mobile: +966504560668KKIA - Bldg. 500Riyadh This email has been classified as Saudi Aramco: Company General Use on 9/21/2021 2:19 PM From: Almutawa, Abdulrhman F Sent: Tuesday, September 21, 2021 9:48 AM To: 'observium' <observium-bounces(a)observium.org> Subject: Ubuntu network issue Classification: Saudi Aramco: Company General Use Greeting Observium, I am facing issue with my ubuntu machine that could not connect to 2 networks(subnet). In the network settings, it allow me to configure only one (1) network and deactivating the other network. Could you please share with me the workaround steps that can I follow to resolve this issue? Best regards Almutawa, Abdulrahman F.Industrial Computer Engineer III CRDD, Engineering DivisionTechnical Support Unit Tel. +966 11 285 6371Mobile: +966504560668KKIA - Bldg. 500Riyadh This email has been classified as Saudi Aramco: Company General Use on 9/21/2021 9:48 AM The contents of this email, including all related responses, files and attachments transmitted with it (collectively referred to as “this Email”), are intended solely for the use of the individual/entity to whom/which they are addressed, and may contain confidential and/or legally privileged information. This Email may not be disclosed or forwarded to anyone else without authorization from the originator of this Email. If you have received this Email in error, please notify the sender immediately and delete all copies from your system. Please note that the views or opinions presented in this Email are those of the author and may not necessarily represent those of Saudi Aramco. The recipient should check this Email and any attachments for the presence of any viruses. Saudi Aramco accepts no liability for any damage caused by any virus/error transmitted by this Email. For more information about Saudi Aramco’s corporate profile, please visit http://saudiaramco.com. للمزيد من المعلومات عن ملف الشركة الخاص بأرامكو السعودية، يرجى زيارة http://www.saudiaramco.com. _______________________________________________ observium mailing list observium(a)observium.org http://postman.memetic.org/cgi-bin/mailman/listinfo/observium

2 1

Re: [Observium] Ubuntu network issue
by Almutawa, Abdulrhman F 26 Sep '21

26 Sep '21

Classification: Saudi Aramco: Company General Use This is a kind reminder please! Please support me to resolve the below issue. Best regards This email has been classified as Saudi Aramco: Company General Use on 9/26/2021 7:48 AM From: Almutawa, Abdulrhman F Sent: Tuesday, September 21, 2021 2:19 PM To: Observium <observium(a)observium.org> Subject: FW: Ubuntu network issue Classification: Saudi Aramco: Company General Use Hello Observium, Can you please support me with the below request? Best regards Almutawa, Abdulrahman F. Industrial Computer Engineer III [cid:CDDFFC45.png] CRDD, Engineering Division Technical Support Unit Tel. +966 11 285 6371 Mobile: +966504560668 KKIA - Bldg. 500 Riyadh This email has been classified as Saudi Aramco: Company General Use on 9/21/2021 2:19 PM From: Almutawa, Abdulrhman F Sent: Tuesday, September 21, 2021 9:48 AM To: 'observium' <observium-bounces(a)observium.org<mailto:observium-bounces@observium.org>> Subject: Ubuntu network issue Classification: Saudi Aramco: Company General Use Greeting Observium, I am facing issue with my ubuntu machine that could not connect to 2 networks(subnet). In the network settings, it allow me to configure only one (1) network and deactivating the other network. Could you please share with me the workaround steps that can I follow to resolve this issue? Best regards Almutawa, Abdulrahman F. Industrial Computer Engineer III [cid:CDDFFC45.png] CRDD, Engineering Division Technical Support Unit Tel. +966 11 285 6371 Mobile: +966504560668 KKIA - Bldg. 500 Riyadh This email has been classified as Saudi Aramco: Company General Use on 9/21/2021 9:48 AM ________________________________ The contents of this email, including all related responses, files and attachments transmitted with it (collectively referred to as "this Email"), are intended solely for the use of the individual/entity to whom/which they are addressed, and may contain confidential and/or legally privileged information. This Email may not be disclosed or forwarded to anyone else without authorization from the originator of this Email. If you have received this Email in error, please notify the sender immediately and delete all copies from your system. Please note that the views or opinions presented in this Email are those of the author and may not necessarily represent those of Saudi Aramco. The recipient should check this Email and any attachments for the presence of any viruses. Saudi Aramco accepts no liability for any damage caused by any virus/error transmitted by this Email. For more information about Saudi Aramco's corporate profile, please visit http://saudiaramco.com. ?????? ?? ????????? ?? ??? ?????? ????? ??????? ????????? ???? ????? http://www.saudiaramco.com.

1 0

AUTO: Andrea Mastrangelo is out of the office (restituzione di Ven 15/10/2021)
by A.Mastrangelo＠ads.it 24 Sep '21

24 Sep '21

Sono fuori dall'ufficio da Ven 24/09/2021 fino a Ven 15/10/2021. scrivere in copia a wanclienti(a)ads.it Nota: Questa è una risposta automatizzata al messaggio "[Observium] unending disk space growth?" inviata il 24/09/2021 17:20:45. Questa è l'unica notifica che verrà ricevuta mentre la persona è assente. Questa e-mail ed i suoi allegati sono ad uso esclusivo di coloro ai quali è indirizzata e potrebbe contenere informazioni riservate, la cui diffusione, copia e/o distribuzione è proibita. Qualora riceveste questo messaggio per errore, scusandoci per l'accaduto, Vi preghiamo di avvertirci immediatamente, distruggendo quanto ricevuto. -- Messaggio analizzato da Libraesva ESG.

1 0

Changes to alarm checkers
by Daniel Johansson 23 Sep '21

23 Sep '21

Hi I see that some changes has been done to how you build the alarm checkers since a while back. Before you had to type everything out to match everything, devices, entitys and association,conditions. Now some of the things we have matched for and has worked no longer works. Also there are some stuff that I could match for before but not any londer. for example in a few cisco devices I run som links with macsec and I want to verify that the encryption is running and send an alert if not. This I can not do any more. see picture for the data I want to use: How can I still use this in observium 21.9.11575 (stable) ? ---- Regards Daniel

1 0

OpticalChannel no longer ignored
by Robert Williams 23 Sep '21

23 Sep '21

Hi! Overnight during the svn up to 11597 we have gained a couple of hundred 'ports' which are on various SmartOptics chassis (DCP and M series) of type "Optical Channel" There was already an exclusion for this type of interface (as the data polled is null anyway, even for 'Up' channels) but it now seems to be ignoring the exclusion and showing a couple of hundred extra (Down) ports now. The current config.php exclusions I've tried are: $config['bad_if_regexp'][] = "/opticalChannel/"; $config['bad_if'][] = "opticalChannel"; $config['bad_iftype'][] = "opticalChannel"; With no luck, although it is correctly importing them into the config, for example: Any ideas please? Cheers! Robert Williams Custodian Data Centres https://www.CustodianDC.com

2 3

Re: [Observium] Ubuntu network issue
by Almutawa, Abdulrhman F 22 Sep '21

22 Sep '21

Classification: Saudi Aramco: Company General Use This is a kind reminder. Thank you Almutawa, Abdulrahman F. Industrial Computer Engineer III [cid:CDDFFC45.png] CRDD, Engineering Division Technical Support Unit Tel. +966 11 285 6371 Mobile: +966504560668 KKIA - Bldg. 500 Riyadh This email has been classified as Saudi Aramco: Company General Use on 9/22/2021 2:09 PM From: Almutawa, Abdulrhman F Sent: Tuesday, September 21, 2021 2:19 PM To: 'Observium' <observium(a)observium.org> Subject: FW: Ubuntu network issue Classification: Saudi Aramco: Company General Use Hello Observium, Can you please support me with the below request? Best regards Almutawa, Abdulrahman F. Industrial Computer Engineer III [cid:CDDFFC45.png] CRDD, Engineering Division Technical Support Unit Tel. +966 11 285 6371 Mobile: +966504560668 KKIA - Bldg. 500 Riyadh This email has been classified as Saudi Aramco: Company General Use on 9/21/2021 2:19 PM From: Almutawa, Abdulrhman F Sent: Tuesday, September 21, 2021 9:48 AM To: 'observium' <observium-bounces(a)observium.org<mailto:observium-bounces@observium.org>> Subject: Ubuntu network issue Classification: Saudi Aramco: Company General Use Greeting Observium, I am facing issue with my ubuntu machine that could not connect to 2 networks(subnet). In the network settings, it allow me to configure only one (1) network and deactivating the other network. Could you please share with me the workaround steps that can I follow to resolve this issue? Best regards Almutawa, Abdulrahman F. Industrial Computer Engineer III [cid:CDDFFC45.png] CRDD, Engineering Division Technical Support Unit Tel. +966 11 285 6371 Mobile: +966504560668 KKIA - Bldg. 500 Riyadh This email has been classified as Saudi Aramco: Company General Use on 9/21/2021 9:48 AM ________________________________ The contents of this email, including all related responses, files and attachments transmitted with it (collectively referred to as "this Email"), are intended solely for the use of the individual/entity to whom/which they are addressed, and may contain confidential and/or legally privileged information. This Email may not be disclosed or forwarded to anyone else without authorization from the originator of this Email. If you have received this Email in error, please notify the sender immediately and delete all copies from your system. Please note that the views or opinions presented in this Email are those of the author and may not necessarily represent those of Saudi Aramco. The recipient should check this Email and any attachments for the presence of any viruses. Saudi Aramco accepts no liability for any damage caused by any virus/error transmitted by this Email. For more information about Saudi Aramco's corporate profile, please visit http://saudiaramco.com. ?????? ?? ????????? ?? ??? ?????? ????? ??????? ????????? ???? ????? http://www.saudiaramco.com.

1 0

Location Not Showing
by Njoroge, Joyce (Stadt Ulm) 21 Sep '21

21 Sep '21

Hallo, the snmp location configuration in the Cisco switches are separated by a comma. But in Observium, the comma is changed to 1%F, which I assume is the reason for the error. When I change the location menu type in the web UI to geocoded, it works okay but not for nested location despite setting the Nested Location split character to a comma . -----Ursprüngliche Nachricht----- Von: observium <observium-bounces(a)observium.org> Im Auftrag von observium-request(a)observium.org Gesendet: Mittwoch, 15. September 2021 13:00 An: observium(a)observium.org Betreff: observium Digest, Vol 134, Issue 13 Send observium mailing list submissions to observium(a)observium.org To subscribe or unsubscribe via the World Wide Web, visit http://postman.memetic.org/cgi-bin/mailman/listinfo/observium or, via email, send a message with subject or body 'help' to observium-request(a)observium.org You can reach the person managing the list at observium-owner(a)observium.org When replying, please edit your Subject line so it is more specific than "Re: Contents of observium digest..." Today's Topics: 1. Re: Device Location (Adam Armstrong) 2. Test email (Almutawa, Abdulrhman F) ---------------------------------------------------------------------- Message: 1 Date: Tue, 14 Sep 2021 15:21:44 +0100 From: Adam Armstrong <adama(a)observium.org> To: Observium <observium(a)observium.org> Subject: Re: [Observium] Device Location Message-ID: <D335C349-7312-429F-BDF2-282680132D13(a)observium.org> Content-Type: text/plain; charset="utf-8" Looks like there’s some fussiness going on there with special characters and escaping. Is there supposed to be a comma where it puts the %1F? Adam. Sent from my iPhone > On 14 Sep 2021, at 11:08, Njoroge, Joyce (Stadt Ulm) via observium <observium(a)observium.org> wrote: > > > Hallo, > > I have added SNMP devices in groups (Country, City, Address). However, when I filter a specific device using locations (e.g. Locations -> Country -> City -> Address), then I get the message that 'No devices found Please try adjusting your search parameters' (seen in attached photo). What could be the problem? > > > > Thanks. > > Regards > Jay > > _______________________________________________ > observium mailing list > observium(a)observium.org > http://postman.memetic.org/cgi-bin/mailman/listinfo/observium -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://postman.memetic.org/pipermail/observium/attachments/20210914/d5a1029…> -------------- next part -------------- A non-text attachment was scrubbed... Name: Picture (Device Independent Bitmap) 1.jpg Type: image/jpeg Size: 39390 bytes Desc: not available URL: <http://postman.memetic.org/pipermail/observium/attachments/20210914/d5a1029…> ------------------------------ Message: 2 Date: Wed, 15 Sep 2021 04:28:06 +0000 From: "Almutawa, Abdulrhman F" <abdulrhman.almutawa(a)aramco.com> To: Observium <observium(a)observium.org> Subject: [Observium] Test email Message-ID: <20210915042812.AE42328673(a)postman.memetic.org> Content-Type: text/plain; charset="utf-8" Classification: Saudi Aramco: Company General Use This email for test only. This email has been classified as Saudi Aramco: Company General Use on 9/15/2021 7:28 AM ________________________________ The contents of this email, including all related responses, files and attachments transmitted with it (collectively referred to as "this Email"), are intended solely for the use of the individual/entity to whom/which they are addressed, and may contain confidential and/or legally privileged information. This Email may not be disclosed or forwarded to anyone else without authorization from the originator of this Email. If you have received this Email in error, please notify the sender immediately and delete all copies from your system. Please note that the views or opinions presented in this Email are those of the author and may not necessarily represent those of Saudi Aramco. The recipient should check this Email and any attachments for the presence of any viruses. Saudi Aramco accepts no liability for any damage caused by any virus/error transmitted by this Email. For more information about Saudi Aramco's corporate profile, please visit http://saudiaramco.com. ?????? ?? ????????? ?? ??? ?????? ????? ??????? ????????? ???? ????? http://www.saudiaramco.com. -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://postman.memetic.org/pipermail/observium/attachments/20210915/d671ffa…> ------------------------------ Subject: Digest Footer _______________________________________________ observium mailing list observium(a)observium.org http://postman.memetic.org/cgi-bin/mailman/listinfo/observium ------------------------------ End of observium Digest, Vol 134, Issue 13 ******************************************

2 1

FW: Ubuntu network issue
by Almutawa, Abdulrhman F 21 Sep '21

21 Sep '21

Classification: Saudi Aramco: Company General Use Hello Observium, Can you please support me with the below request? Best regards Almutawa, Abdulrahman F. Industrial Computer Engineer III [cid:CDDFFC45.png] CRDD, Engineering Division Technical Support Unit Tel. +966 11 285 6371 Mobile: +966504560668 KKIA - Bldg. 500 Riyadh This email has been classified as Saudi Aramco: Company General Use on 9/21/2021 2:19 PM From: Almutawa, Abdulrhman F Sent: Tuesday, September 21, 2021 9:48 AM To: 'observium' <observium-bounces(a)observium.org> Subject: Ubuntu network issue Classification: Saudi Aramco: Company General Use Greeting Observium, I am facing issue with my ubuntu machine that could not connect to 2 networks(subnet). In the network settings, it allow me to configure only one (1) network and deactivating the other network. Could you please share with me the workaround steps that can I follow to resolve this issue? Best regards Almutawa, Abdulrahman F. Industrial Computer Engineer III [cid:CDDFFC45.png] CRDD, Engineering Division Technical Support Unit Tel. +966 11 285 6371 Mobile: +966504560668 KKIA - Bldg. 500 Riyadh This email has been classified as Saudi Aramco: Company General Use on 9/21/2021 9:48 AM ________________________________ The contents of this email, including all related responses, files and attachments transmitted with it (collectively referred to as "this Email"), are intended solely for the use of the individual/entity to whom/which they are addressed, and may contain confidential and/or legally privileged information. This Email may not be disclosed or forwarded to anyone else without authorization from the originator of this Email. If you have received this Email in error, please notify the sender immediately and delete all copies from your system. Please note that the views or opinions presented in this Email are those of the author and may not necessarily represent those of Saudi Aramco. The recipient should check this Email and any attachments for the presence of any viruses. Saudi Aramco accepts no liability for any damage caused by any virus/error transmitted by this Email. For more information about Saudi Aramco's corporate profile, please visit http://saudiaramco.com. ?????? ?? ????????? ?? ??? ?????? ????? ??????? ????????? ???? ????? http://www.saudiaramco.com.

1 0

Feature Request: Reoccurring Scheduled Maintenance
by Luis Londoño 20 Sep '21

20 Sep '21

We have a reoccurring monthly scheduled maintenance window. It would be much easier to schedule that in Observium with reoccurring schedules then doing it for every month

1 0

MySQL/MariaDB monitoring
by Joelly, Alexander 17 Sep '21

17 Sep '21

The MySQL App graphs on my Observium host only graphing the MySQL System & Queries but nothing for innoDB except the InnoDB Log Is the anything additionally to set to get the other graphs working as well? running the mysql query script locally gives following output: <<<mysql>>> a0:8 a1:4 a2:0 a3:0 a4:-1 a5:-1 a6:-1 a7:-1 a8:-1 a9:-1 aa:-1 ab:-1 ac:-1 ad:-1 ae:-1 af:-1 ag:-1 ah:-1 ai:-1 aj:-1 ak:-1 al:-1 am:-1 an:-1 ao:-1 ap:-1 aq:-1 ar:-1 as:-1 at:-1 au:-1 av:-1 aw:-1 ax:-1 ay:-1 az:-1 b0:-1 b1:-1 b2:-1 b3:-1 b4:0 b5:19 b6:0 b7:25 b8:284 b9:291 ba:2000 bb:32768 bc:2000 bd:0 be:3 bf:194 bg:0 bh:61 bi:133 bj:194 bk:7 bl:8192 bm:256 bn:44136 bo:-1 bp:-1 bq:0 br:-1 bs:0 bt:2247 bu:7249176 bv:931561 bw:1703944 bx:494047 by:99150 bz:5422 c0:13171 c1:16777216 c2:5988535 c3:2979656 c4:98399 c5:2734348 c6:43840 c7:0 c8:0 c9:0 ca:0 cb:0 cc:0 cd:35 ce:0 cf:19345 cg:0 ch:83601 ci:0 cj:49873 ck:538619 cl:694 cm:49775 cn:350 co:5 cp:12001694929 cq:1592734939 cr:16777216 cs:-1 ct:-1 cu:-1 cv:-1 cw:32768 cx:0 cy:0 cz:-1 d0:-1 d1:-1 d2:-1 d3:-1 d4:-1 d5:-1 d6:1 d7:-1 d8:-1 d9:-1 da:-1 db:-1 dc:-1 dd:-1 de:-1 df:-1 dg:-1 dh:-1 di:4836614 dj:124200 dk:0 dl:0 dm:1745 dn:7100602 do:83835892 dp:1394 dq:1697321 dr:77390433 ds:0 dt:0 du:0 dv:3953279 dw:1118301 dx:-1 dy:-1 dz:-1 e0:-1 e1:-1 e2:-1 e3:-1 e4:-1 e5:-1 e6:-1 e7:-1 e8:-1 e9:-1 ea:-1 eb:-1 ec:-1 ed:-1 ee:-1 ef:-1 eg:0 eh:24486912 ei:134217728 ej:12453 ek:2840 thx, Alex

2 2

Observium server redundancy
by Toky ANDRIANASOLO 17 Sep '21

17 Sep '21

Hello, As we need observium service continuity 24/7 can we install another observium in another server with different IP so that if the running one goes down we make the backup on live? in this case, what about the license (SVN user/password for Observium Enterprise) Thank you and Regards, Toky,

2 2

Is anyone using Observium to monitor Calix E7 GPON hardware?
by Richard Kuhns 15 Sep '21

15 Sep '21

Hello, We're in the processing of deploying a number of Calix E7 shelves and we'd really like to be able to monitor them using Observium. The problem is that a fairly full shelf can take a very long time (well over 5 mintues) to discover/poll. Our major concern is to be able to look at the uplink ports & the physical PON ports. More info would be nice, but it's not as important. If anyone is using Observium to monitor these devices and would be willing to share how you're doing it we'd greatly appreciate it. Thanks! -- Richard Kuhns <rjk(a)wintek.com> Systems Administrator Wintek Powered by Tipmont Main: 765-742-8428 Direct: 765-269-8541

1 0

Test email
by Almutawa, Abdulrhman F 15 Sep '21

15 Sep '21

Classification: Saudi Aramco: Company General Use This email for test only. This email has been classified as Saudi Aramco: Company General Use on 9/15/2021 7:28 AM ________________________________ The contents of this email, including all related responses, files and attachments transmitted with it (collectively referred to as "this Email"), are intended solely for the use of the individual/entity to whom/which they are addressed, and may contain confidential and/or legally privileged information. This Email may not be disclosed or forwarded to anyone else without authorization from the originator of this Email. If you have received this Email in error, please notify the sender immediately and delete all copies from your system. Please note that the views or opinions presented in this Email are those of the author and may not necessarily represent those of Saudi Aramco. The recipient should check this Email and any attachments for the presence of any viruses. Saudi Aramco accepts no liability for any damage caused by any virus/error transmitted by this Email. For more information about Saudi Aramco's corporate profile, please visit http://saudiaramco.com. ?????? ?? ????????? ?? ??? ?????? ????? ??????? ????????? ???? ????? http://www.saudiaramco.com.

1 0

Device Location
by Njoroge, Joyce (Stadt Ulm) 14 Sep '21

14 Sep '21

Hallo, I have added SNMP devices in groups (Country, City, Address). However, when I filter a specific device using locations (e.g. Locations -> Country -> City -> Address), then I get the message that 'No devices found Please try adjusting your search parameters' (seen in attached photo). What could be the problem? Thanks. Regards Jay

2 1

SSO and observium HA
by Toky ANDRIANASOLO 13 Sep '21

13 Sep '21

Hello, Still have some questions please, - Can we use SSO (Single Sign-on) on observium? - Is there a possibility to have 02 observium working as High Availability? so that if the main one is down the secondary take the relay Thank you and Regards, -- *Toky*

2 1

observium_map
by Toky ANDRIANASOLO 13 Sep '21

13 Sep '21

Hello, Being a new observium user, my requests follow one another. could you please help us on how to create observium map, Is it possible to set map dependency (click on global map and then redirected to detailed submap and so one) Thank you and Regards, Toky --

3 3

secure http access
by Toky ANDRIANASOLO 09 Sep '21

09 Sep '21

Hello, Could you please show us how to change http for https for the web access Thank you and Regards -- Toky

2 5

no graph shown for all sensors
by Toky ANDRIANASOLO 09 Sep '21

09 Sep '21

Hello, We can install the observium on debian 11 thanks to your support on my other request. For test, I added just 01 switch DELL, device well added using snmpV2 but* there is no graph shown on all sensors* (port, cpu, memory...) your support please, Thank you and Regards -- toky

3 10

Possibly Alert filter bug?
by Laszlo Nemeth 08 Sep '21

08 Sep '21

Hello We have some Check Point firewalls and if i make an Alert check to their memory usage and try to associate it to these firewalls, after the SAVE CHANGES the check doesn't shows any associated items even if i set the hostname directly or use the exact hardware type of it like the attached pictures. If i add the "Device Vendor in Check Point" it shows our other Check Point-made firewall but not that is in the attached picture (where the hardware is 15600 or the hostname is **fw01 . Is it a bug or just i made a mistake? Thanks Laszlo

3 3

10H Enterprise-grade support
by Toky ANDRIANASOLO 08 Sep '21

08 Sep '21

Could you please guide us on how to get into the Enterprise-grade support 10H after purchasing Observium enterprise lincense We really need closer support or troubleshoot on live if possible Thank you and Regards -- *Toky*

2 1

migrate from a Community Edition to a Professional edition - offline
by Daniel Marecki 08 Sep '21

08 Sep '21

Hello. I've a local network not connected to the internet. I'm currently using CE edition. How can I migrate from a CE to a PRO edition offline? Thank you for your answer. Best regards. Daniel

2 3

Re: [Observium] [EXTERNAL] Re: SNMPV3 Unreachable
by Almutawa, Abdulrhman F 07 Sep '21

07 Sep '21

Classification: Saudi Aramco: Company General Use This is a kind reminder, What I’m looking for are the steps to communicate via SNMPv3 from Observium. The endpoint’s already configured to enable the SNMPv3 Best regards Almutawa, Abdulrahman F. Industrial Computer Engineer III [cid:CDDFFC45.png] CRDD, Engineering Division Technical Support Unit Tel. +966 11 285 6371 Mobile: +966504560668 KKIA - Bldg. 500 Riyadh This email has been classified as Saudi Aramco: Company General Use on 9/6/2021 9:09 AM From: Almutawa, Abdulrhman F Sent: Sunday, September 5, 2021 7:38 AM To: 'Observium' <observium(a)observium.org> Cc: Adam Armstrong <adama(a)observium.org> Subject: RE: [EXTERNAL] Re: [Observium] SNMPV3 Unreachable Classification: Saudi Aramco: Company General Use Thank you for your response! Would you please provide the procedure to follow the steps to enable SNMPV3. Thank you Almutawa, Abdulrahman F. Industrial Computer Engineer III [cid:CDDFFC45.png] CRDD, Engineering Division Technical Support Unit Tel. +966 11 285 6371 Mobile: +966504560668 KKIA - Bldg. 500 Riyadh From: observium <observium-bounces(a)observium.org<mailto:observium-bounces@observium.org>> On Behalf Of Adam Armstrong via observium Sent: Thursday, September 2, 2021 2:13 PM To: Observium <observium(a)observium.org<mailto:observium@observium.org>> Cc: Adam Armstrong <adama(a)observium.org<mailto:adama@observium.org>> Subject: [EXTERNAL] Re: [Observium] SNMPV3 Unreachable PHISHING ALERT This email has been sent from outside Saudi Aramco. Be aware that this could be a phishing attempt. Report this message to spam(a)aramco.com<mailto:spam@aramco.com> if the email contains any suspicious content. Hi, SNMPv3 is more complex than SNMPv2 and requires all of the configuration parameters to match. If you're having trouble making SNMPv3 work to a particular type of device, you should try to make it work properly from the commandline using snmpwalk first. We can't really give a great deal of help for end devices beyond auth and encryption configuration on both Observium and the end device needing to match. adam. Sent from Mailspring<https://getmailspring.com/>, the best free email app for work On Sep 2 2021, at 11:55 am, Almutawa, Abdulrhman F via observium <observium(a)observium.org<mailto:observium@observium.org>> wrote: Classification: Saudi Aramco: Company General Use Hello Observium team, I enabled SNMPV3 in my HP switch, but the Observium shows me error in the verification process and unable to add this device! Can you please support? Best regards This email has been classified as Saudi Aramco: Company General Use on 9/2/2021 1:55 PM The contents of this email, including all related responses, files and attachments transmitted with it (collectively referred to as “this Email”), are intended solely for the use of the individual/entity to whom/which they are addressed, and may contain confidential and/or legally privileged information. This Email may not be disclosed or forwarded to anyone else without authorization from the originator of this Email. If you have received this Email in error, please notify the sender immediately and delete all copies from your system. Please note that the views or opinions presented in this Email are those of the author and may not necessarily represent those of Saudi Aramco. The recipient should check this Email and any attachments for the presence of any viruses. Saudi Aramco accepts no liability for any damage caused by any virus/error transmitted by this Email. For more information about Saudi Aramco’s corporate profile, please visit http://saudiaramco.com. للمزيد من المعلومات عن ملف الشركة الخاص بأرامكو السعودية، يرجى زيارة http://www.saudiaramco.com. _______________________________________________ observium mailing list observium(a)observium.org<mailto:observium@observium.org> http://postman.memetic.org/cgi-bin/mailman/listinfo/observium This email has been classified as Saudi Aramco: Company General Use on 9/5/2021 7:38 AM

4 3

SNMPV3 Unreachable
by Almutawa, Abdulrhman F 05 Sep '21

05 Sep '21

Classification: Saudi Aramco: Company General Use Hello Observium team, I enabled SNMPV3 in my HP switch, but the Observium shows me error in the verification process and unable to add this device! Can you please support? Best regards This email has been classified as Saudi Aramco: Company General Use on 9/2/2021 1:55 PM ________________________________ The contents of this email, including all related responses, files and attachments transmitted with it (collectively referred to as "this Email"), are intended solely for the use of the individual/entity to whom/which they are addressed, and may contain confidential and/or legally privileged information. This Email may not be disclosed or forwarded to anyone else without authorization from the originator of this Email. If you have received this Email in error, please notify the sender immediately and delete all copies from your system. Please note that the views or opinions presented in this Email are those of the author and may not necessarily represent those of Saudi Aramco. The recipient should check this Email and any attachments for the presence of any viruses. Saudi Aramco accepts no liability for any damage caused by any virus/error transmitted by this Email. For more information about Saudi Aramco's corporate profile, please visit http://saudiaramco.com. ?????? ?? ????????? ?? ??? ?????? ????? ??????? ????????? ???? ????? http://www.saudiaramco.com.

2 2

observium enterprise doesnt word after installation
by Toky ANDRIANASOLO 03 Sep '21

03 Sep '21

We just had 1 year of subscription license observium Enterprise, ref: 4011610 We are completely new on this monitoring tools and really need your support for the installation. Our standard is debian 11, and we proceed on the manual installation as the script on the observim document doesn’t work (script automatic installation for debian 10) All the package are installed, observium seems to be installed following the guide (SNV username/password inserted) but *when we access the observium via GUI, the apache default page is shown instead of observium page* We already remove the apache (2.4) and then reinstalled and configure but the same result. Could you please help us on that or redirect me on the right support as we are turning around on this issue for a few weeks Thank you -- *Toky *

2 3