- observium - lists.observium.org

Integration with Nagions/Smokeping - How does it work?
by Sam Munzani 25 Apr '13

25 Apr '13

Hi, I am new to Observium. Downloaded it last week and got a few devices working on it. Did Rancid plug-in and now all configs show up on Observium. I also added following to config.php and have Nagios3 and Smokeping running independently on the same box. However I don't know how its supposed to show up. Rancid was obvious because of the extra tab that shows up. How does it work with nagios and smoke ping? The documentation on these integration is very light. $config['rrdtool'] = "/usr/bin/rrdtool"; $config['fping'] = "/usr/bin/fping"; #$config['fping6'] = "/usr/bin/fping6"; $config['snmpwalk'] = "/usr/bin/snmpwalk"; $config['snmpget'] = "/usr/bin/snmpget"; $config['snmpbulkwalk'] = "/usr/bin/snmpbulkwalk"; $config['whois'] = "/usr/bin/whois"; $config['ping'] = "/bin/ping"; $config['mtr'] = "/usr/bin/mtr"; $config['nmap'] = "/usr/bin/nmap"; $config['nagios_plugins'] = "/usr/lib/nagios/plugins"; $config['ipmitool'] = "/usr/bin/ipmitool"; $config['smokeping']['dir'] = "/var/lib/smokeping/"; #$config['virsh'] = "/usr/bin/virsh"; Also, does it have an ability to add a few URL monitors? I didn't see a reference in the documentation anywhere. Thanks, Sam

4 4

RRD Command button broken
by Mattias Gyllenvarg 24 Apr '13

24 Apr '13

Hi Adam "RRD command" button is broken, it sends you back too the overview page. PS. Favorite BOFH so far "Shut your whore mouth!" -- *Med Vänliga Hälsningar - Best Regards* *Mattias Gyllenvarg* *Nätutveckling* Bredband2 Tel: +46 406219712

2 1

maybe dumb question about observium itself
by Rachid Zarouali 23 Apr '13

23 Apr '13

Hy all, i'm using observium to monitor my network devices, i've seen there are applications that could be as well monitored. are these applications to be maintained or to be dropped ? i'm evaluating zabbix as well, so just wondering if i should keep both ? feedback appreciated, Regards

4 3

Re: [Observium] maybe dumb question about observium itself
by Adam Armstrong 23 Apr '13

23 Apr '13

To make sure this is the case, agent scripts should have the absolute minimum of code. Where possible, just command output or cat'd files, updating php, perl and python scripts after deployment may prove difficult... :) Adam. Tom Laermans <tom.laermans(a)powersource.cx> wrote: >I'll reiterate what I said on IRC: > >Adam feels the current "application" infrastructure is not how it should be. > >However, yes, applications are not going away, just the way they are >monitored may change. Data collection scripts which we have now will >then be converted to whatever new format we'll be using. In the future. >Not now. No time, bugs and alerting first ;-) > >Tom > >On 23/04/2013 11:20, Adam Armstrong wrote: >> The applications stuff is messy. >> >> At some point we need to properly define how it should all work and >> make some real infrastructure for it, but that requires time and >> resource we don't have at the moment. >> >> So it's subject to change at any moment :) >> >> adam. >> >> On 2013-04-23 11:12, Rachid Zarouali wrote: >>> Hy all, >>> >>> i'm using observium to monitor my network devices, i've seen there are >>> applications that could be as well monitored. >>> >>> are these applications to be maintained or to be dropped ? >>> >>> i'm evaluating zabbix as well, so just wondering if i should keep both ? >>> >>> feedback appreciated, >>> >>> Regards >>> _______________________________________________ >>> observium mailing list >>> observium(a)observium.org >>> http://postman.memetic.org/cgi-bin/mailman/listinfo/observium >> _______________________________________________ >> observium mailing list >> observium(a)observium.org >> http://postman.memetic.org/cgi-bin/mailman/listinfo/observium > >_______________________________________________ >observium mailing list >observium(a)observium.org >http://postman.memetic.org/cgi-bin/mailman/listinfo/observium

1 0

Re: [Observium] maybe dumb question about observium itself
by Andreas Bergman 23 Apr '13

23 Apr '13

Hi, We're using a combination of Icinga (nagios) and Observium to monitor our network, some things Icinga do really well, and some things Observium do very well. Br Andreas -----Original Message----- From: "Rachid Zarouali" <rzarouali(a)gmail.com> Sent 4/23/2013 12:12:41 PM To: "Observium Network Observation System" <observium(a)observium.org> Subject: [Observium] maybe dumb question about observium itself Hy all, i'm using observium to monitor my network devices, i've seen there are applications that could be as well monitored. are these applications to be maintained or to be dropped ? i'm evaluating zabbix as well, so just wondering if i should keep both ? feedback appreciated, Regards _______________________________________________ observium mailing list observium(a)observium.org http://postman.memetic.org/cgi-bin/mailman/listinfo/observium

1 0

Re: [Observium] Changes made to Devices > Locations
by Adam Armstrong 23 Apr '13

23 Apr '13

Damn right Tom Laermans <tom.laermans(a)powersource.cx> wrote: >On Tue, 2013-04-23 at 11:49 +0400, Nikolay Shopik wrote: >> Maybe just don't use it at all? It such junk anyway. What's wrong with >> good old k9mail >> >> On 4/23/13 10:46 AM, Tom Laermans wrote: >> > >> > Can someone please fix the threading breakage in the android client? :P > >Unfortunately I can't tell Adam what to use - he'll just take my mailing >list access away :P > >Tom > >_______________________________________________ >observium mailing list >observium(a)observium.org >http://postman.memetic.org/cgi-bin/mailman/listinfo/observium

1 0

Changes made to Devices > Locations
by Sonny Kupka 23 Apr '13

23 Apr '13

Hello, Seems there was a change in code which effects - Devices > Locations. I had set each device with a specific sysLocation - and checked override sysLocation in the device settings. This was working as expected, until I ran updates - Now instead of having my defined locations - It now shows countries - Canada, England, Unknown and all my stuff is showing up under unknown. Is there a place to read about configuration changes - I may need to re-adjust - or is this a bug - as override sysLocation is now overwritten by something else? Thanks. Sonny

6 10

Re: [Observium] Changes made to Devices > Locations
by Adam Armstrong 23 Apr '13

23 Apr '13

You would not be stupid enough to try to complain about something not working on an old release, would you? Paul Gear <observium(a)gear.dyndns.org> wrote: >I'm talking about reverting to the old behaviour, not getting >geolocation working. > >On 04/23/2013 02:31 PM, Adam Armstrong wrote: >> There is still work to be done on it. >> >> The geolocation service we are using is a little temperamental, so needs well formatted locations. >> >> Adam. >> >> Paul Gear <observium(a)gear.dyndns.org> wrote: >> >>> On 04/23/2013 02:17 PM, Sonny Kupka wrote: >>>> Tom, >>>> >>>> Worked perfectly. >>>> >>>> Thanks. >>>> Sonny >>>> >>>> >>>> ----- Original Message ----- >>>> From: "Tom Laermans" <tom.laermans(a)powersource.cx> >>>> To: "Observium Network Observation System" <observium(a)observium.org> >>>> Sent: Monday, April 22, 2013 4:18:05 PM >>>> Subject: Re: [Observium] Changes made to Devices > Locations >>>> >>>> Hi Sonny, >>>> >>>> You can override the geolocation and return to the old behaviour by adding >>>> >>>> $config['location_menu_geocoded'] = FALSE; >>>> >>>> to your configuration file. I like it better too ;-) >>>> >>>> Tom >>> Does that feature require a particular svn revision? I'm on 3934 and it >>> doesn't work for me. >>> >>> Or does it require something like rediscovery? >>> >>> Paul >>> >>> _______________________________________________ >>> observium mailing list >>> observium(a)observium.org >>> http://postman.memetic.org/cgi-bin/mailman/listinfo/observium >> _______________________________________________ >> observium mailing list >> observium(a)observium.org >> http://postman.memetic.org/cgi-bin/mailman/listinfo/observium > >_______________________________________________ >observium mailing list >observium(a)observium.org >http://postman.memetic.org/cgi-bin/mailman/listinfo/observium

2 2

Re: [Observium] Changes made to Devices > Locations
by Adam Armstrong 23 Apr '13

23 Apr '13

Feel free to consider all bug reports and other complaints ignore from nice on, then. Adam. Paul Gear <observium(a)gear.dyndns.org> wrote: >Where "old release" == "I only do 'svn up' in cron.weekly"? Evidently >so. :-) > >/me updates and tries again > >On 04/23/2013 02:42 PM, Adam Armstrong wrote: >> You would not be stupid enough to try to complain about something not working on an old release, would you? >> >> Paul Gear <observium(a)gear.dyndns.org> wrote: >> >>> I'm talking about reverting to the old behaviour, not getting >>> geolocation working. >>> >>> On 04/23/2013 02:31 PM, Adam Armstrong wrote: >>>> There is still work to be done on it. >>>> >>>> The geolocation service we are using is a little temperamental, so needs well formatted locations. >>>> >>>> Adam. >>>> >>>> Paul Gear <observium(a)gear.dyndns.org> wrote: >>>> >>>>> On 04/23/2013 02:17 PM, Sonny Kupka wrote: >>>>>> Tom, >>>>>> >>>>>> Worked perfectly. >>>>>> >>>>>> Thanks. >>>>>> Sonny >>>>>> >>>>>> >>>>>> ----- Original Message ----- >>>>>> From: "Tom Laermans" <tom.laermans(a)powersource.cx> >>>>>> To: "Observium Network Observation System" <observium(a)observium.org> >>>>>> Sent: Monday, April 22, 2013 4:18:05 PM >>>>>> Subject: Re: [Observium] Changes made to Devices > Locations >>>>>> >>>>>> Hi Sonny, >>>>>> >>>>>> You can override the geolocation and return to the old behaviour by adding >>>>>> >>>>>> $config['location_menu_geocoded'] = FALSE; >>>>>> >>>>>> to your configuration file. I like it better too ;-) >>>>>> >>>>>> Tom >>>>> Does that feature require a particular svn revision? I'm on 3934 and it >>>>> doesn't work for me. >>>>> >>>>> Or does it require something like rediscovery? >>>>> >>>>> Paul >>>>> ... > >_______________________________________________ >observium mailing list >observium(a)observium.org >http://postman.memetic.org/cgi-bin/mailman/listinfo/observium

1 0

Issue with 95th Percentile for Billing
by Poh Yong Hwang 23 Apr '13

23 Apr '13

Hi All, New here. :) I have an issue with the billing of traffic. I want to bill according to 95th percentile but for some reason it is always 0Mbps. It can plot my traffic for incoming and outgoing but it always show 0 for my 95th percentile. Any advise on this? Thanks Poh

2 1

Re: [Observium] Issue with 95th Percentile for Billing
by Adam Armstrong 23 Apr '13

23 Apr '13

You are not running the billing poller. Poh Yong Hwang <yongsan(a)gmail.com> wrote: >_______________________________________________ >observium mailing list >observium(a)observium.org >http://postman.memetic.org/cgi-bin/mailman/listinfo/observium

1 0

Re: [Observium] Strange timezone behaviour in graphs
by Adam Armstrong 23 Apr '13

23 Apr '13

Still irritating, though. Matt Hucker <matt(a)nrsolutions.com.au> wrote: >Cool. Easy enough to work around. > >Thanks, >Matt > > >On 23/04/2013, at 2:28 PM, Adam Armstrong wrote: > >> Yes. This is down to some funkiness with timezones between client and server. >> >> It has been known for a while. The last attempted fix was reverted because it broke things even more! >> >> Adam. >> >> Matt Hucker <matt(a)nrsolutions.com.au> wrote: >> >>> Hi, >>> >>> I'm not sure what to make of this. When I try to enter custom time ranges in any of the traffic graphs, I get different results depending on which browser I'm using. >>> >>> Results are as follows. I'm in Brisbane (GMT +10). >>> >>> Mac OS X 10.6 >>> >>> Firefox: Observium always converts the time I enter (in local time) to GMT. Therefore my graphs are out by 10 hours. >>> Safari: Won't accept any time info I enter. Always give me the last 24 hours. >>> Chrom: Everything seems to work ok. >>> >>> Windows 7 >>> >>> Internet Explorer: Always gives me the last 24 hours. Same as Safari on OS X >>> Chrome: Everything seems ok. >>> >>> >>> Clicking any of the preset time periods, e.g 6 / 24 / 48 hours, always works ok regardless of which browser/os I'm using. >>> >>> Is this expected behaviour? >>> >>> Cheers, >>> Matt. >>> _______________________________________________ >>> observium mailing list >>> observium(a)observium.org >>> http://postman.memetic.org/cgi-bin/mailman/listinfo/observium >> _______________________________________________ >> observium mailing list >> observium(a)observium.org >> http://postman.memetic.org/cgi-bin/mailman/listinfo/observium > >_______________________________________________ >observium mailing list >observium(a)observium.org >http://postman.memetic.org/cgi-bin/mailman/listinfo/observium

1 0

Re: [Observium] Strange timezone behaviour in graphs
by Adam Armstrong 23 Apr '13

23 Apr '13

Yes. This is down to some funkiness with timezones between client and server. It has been known for a while. The last attempted fix was reverted because it broke things even more! Adam. Matt Hucker <matt(a)nrsolutions.com.au> wrote: >Hi, > >I'm not sure what to make of this. When I try to enter custom time ranges in any of the traffic graphs, I get different results depending on which browser I'm using. > >Results are as follows. I'm in Brisbane (GMT +10). > >Mac OS X 10.6 > >Firefox: Observium always converts the time I enter (in local time) to GMT. Therefore my graphs are out by 10 hours. >Safari: Won't accept any time info I enter. Always give me the last 24 hours. >Chrom: Everything seems to work ok. > >Windows 7 > >Internet Explorer: Always gives me the last 24 hours. Same as Safari on OS X >Chrome: Everything seems ok. > > >Clicking any of the preset time periods, e.g 6 / 24 / 48 hours, always works ok regardless of which browser/os I'm using. > >Is this expected behaviour? > >Cheers, >Matt. >_______________________________________________ >observium mailing list >observium(a)observium.org >http://postman.memetic.org/cgi-bin/mailman/listinfo/observium

2 1

Re: [Observium] Changes made to Devices > Locations
by Adam Armstrong 23 Apr '13

23 Apr '13

There is still work to be done on it. The geolocation service we are using is a little temperamental, so needs well formatted locations. Adam. Paul Gear <observium(a)gear.dyndns.org> wrote: >On 04/23/2013 02:17 PM, Sonny Kupka wrote: >> Tom, >> >> Worked perfectly. >> >> Thanks. >> Sonny >> >> >> ----- Original Message ----- >> From: "Tom Laermans" <tom.laermans(a)powersource.cx> >> To: "Observium Network Observation System" <observium(a)observium.org> >> Sent: Monday, April 22, 2013 4:18:05 PM >> Subject: Re: [Observium] Changes made to Devices > Locations >> >> Hi Sonny, >> >> You can override the geolocation and return to the old behaviour by adding >> >> $config['location_menu_geocoded'] = FALSE; >> >> to your configuration file. I like it better too ;-) >> >> Tom > >Does that feature require a particular svn revision? I'm on 3934 and it >doesn't work for me. > >Or does it require something like rediscovery? > >Paul > >_______________________________________________ >observium mailing list >observium(a)observium.org >http://postman.memetic.org/cgi-bin/mailman/listinfo/observium

2 1

Re: [Observium] FW: observium Digest, Vol 33, Issue 45
by Adam Armstrong 23 Apr '13

23 Apr '13

You are not our target market, then. Sam Munzani <smunzani(a)gmail.com> wrote: >> >> >> >>On 2013-04-22 15:32, Sam Munzani wrote: >>> Hi, >>> >>> I deployed Observium over the weekend to try out. Reading through >>> documents, I figured out how to exclude specific interface types. >>> However trying to figure out how to exclude a specific interface? E.g. >>> The list might be Fa0/30, Fa0/37, Gig0/9, Gig0/42. No contiguous >>> interface. >> >>This is contra to the design ethos of Observium, thus there is no simple >>way to do this. >> >>Thanks, >>adam. > >While its a great concept, its not scalable. I have Qty 40 of the Cisco 48 >port switches and not all ports I care about. These are desktop ports and >I care to graph uplink ports only. Even if it does it efficiently, it is >junk data that I would never use. > >What would have been awesome is let Observium discover everything and let >administrators decide what they want to graph. > >Its sad that even though I like the tool, it doesn't fit me because of >this limitation(or so called feature). > >My 2 cents. > >Sam > > >_______________________________________________ >observium mailing list >observium(a)observium.org >http://postman.memetic.org/cgi-bin/mailman/listinfo/observium

1 0

FW: observium Digest, Vol 33, Issue 45
by Sam Munzani 23 Apr '13

23 Apr '13

> > > >On 2013-04-22 15:32, Sam Munzani wrote: >> Hi, >> >> I deployed Observium over the weekend to try out. Reading through >> documents, I figured out how to exclude specific interface types. >> However trying to figure out how to exclude a specific interface? E.g. >> The list might be Fa0/30, Fa0/37, Gig0/9, Gig0/42. No contiguous >> interface. > >This is contra to the design ethos of Observium, thus there is no simple >way to do this. > >Thanks, >adam. While its a great concept, its not scalable. I have Qty 40 of the Cisco 48 port switches and not all ports I care about. These are desktop ports and I care to graph uplink ports only. Even if it does it efficiently, it is junk data that I would never use. What would have been awesome is let Observium discover everything and let administrators decide what they want to graph. Its sad that even though I like the tool, it doesn't fit me because of this limitation(or so called feature). My 2 cents. Sam

2 1

Strange timezone behaviour in graphs
by Matt Hucker 23 Apr '13

23 Apr '13

Hi, I'm not sure what to make of this. When I try to enter custom time ranges in any of the traffic graphs, I get different results depending on which browser I'm using. Results are as follows. I'm in Brisbane (GMT +10). Mac OS X 10.6 Firefox: Observium always converts the time I enter (in local time) to GMT. Therefore my graphs are out by 10 hours. Safari: Won't accept any time info I enter. Always give me the last 24 hours. Chrom: Everything seems to work ok. Windows 7 Internet Explorer: Always gives me the last 24 hours. Same as Safari on OS X Chrome: Everything seems ok. Clicking any of the preset time periods, e.g 6 / 24 / 48 hours, always works ok regardless of which browser/os I'm using. Is this expected behaviour? Cheers, Matt.

1 0

New memory graphs
by David Brodbeck 22 Apr '13

22 Apr '13

Loving the new, more detailed Linux memory graphs. Much more useful now that I can see how much is actual memory use, and how much is cache that will be expunged as needed. -- David Brodbeck System Administrator, Linguistics University of Washington

1 0

How to exclude some network interfaces?
by Sam Munzani 22 Apr '13

22 Apr '13

Hi, I deployed Observium over the weekend to try out. Reading through documents, I figured out how to exclude specific interface types. However trying to figure out how to exclude a specific interface? E.g. The list might be Fa0/30, Fa0/37, Gig0/9, Gig0/42. No contiguous interface. Thanks in advance, Sam

4 3

Observium VMs wrong OS version
by observium＠velder.li 21 Apr '13

21 Apr '13

Hi there In the virtual machine overview (ESXi Host..), the os version is not correct. I added the VM to observium, when squeeze 6.0.6 was installed. Now it is 6.0.7 (since a few weeks) but observium still says 6.0.6. Is that a bug? Regards, Patrick

2 2

IPMI weirdness
by Robert Williams 21 Apr '13

21 Apr '13

Hi All, For a while now it appears that all our devices which also have IPMI cards are seeing every single sensor added and deleted (in that order) on every poll. A relevant snippet from the debug of one device gives: (319ms) Discover sensor: temperature, Array, , 1, ipmi, System Temp, 1 , 1, -7.000, -5.000, 80.000, 85.000, 31.000 , ipmi, , , , SQL[SELECT COUNT(sensor_id) FROM `sensors` WHERE `poller_type`= 'ipmi' AND `sensor_class` = 'temperature' AND `device_id` = '190' AND sensor_type = 'ipmi' AND `sensor_index` = '1'] SQL[INSERT INTO `sensors` (`poller_type`,`sensor_class`,`device_id`,`sensor_oid`,`sensor_index`,`sensor_type`,`sensor_descr`,`sensor_divisor`,`sensor_multiplier`,`sensor_limit`,`sensor_limit_warn`,`sensor_limit_low`,`sensor_limit_low_warn`,`entPhysicalIndex`,`entPhysicalIndex_measured`,`measured_class`,`measured_entity`) VALUES ('ipmi','temperature','190','','1','ipmi','System Temp','1','1','85.000','80.000','-7.000','-5.000','','','','')] ( 223532 inserted ) + SQL[INSERT INTO `eventlog` (`device_id`,`reference`,`type`,`timestamp`,`message`) VALUES ('190','NULL','sensor',NOW(),'Sensor Added: temperature ipmi 1 System Temp')] Discover sensor: temperature, Array, , 2, ipmi, Peripheral Temp, 1 , 1, -7.000, -5.000, 80.000, 85.000, 37.000 , ipmi, , , , SQL[SELECT COUNT(sensor_id) FROM `sensors` WHERE `poller_type`= 'ipmi' AND `sensor_class` = 'temperature' AND `device_id` = '190' AND sensor_type = 'ipmi' AND `sensor_index` = '2'] SQL[INSERT INTO `sensors` (`poller_type`,`sensor_class`,`device_id`,`sensor_oid`,`sensor_index`,`sensor_type`,`sensor_descr`,`sensor_divisor`,`sensor_multiplier`,`sensor_limit`,`sensor_limit_warn`,`sensor_limit_low`,`sensor_limit_low_warn`,`entPhysicalIndex`,`entPhysicalIndex_measured`,`measured_class`,`measured_entity`) VALUES ('ipmi','temperature','190','','2','ipmi','Peripheral Temp','1','1','85.000','80.000','-7.000','-5.000','','','','')] ( 223533 inserted ) + SQL[INSERT INTO `eventlog` (`device_id`,`reference`,`type`,`timestamp`,`message`) VALUES ('190','NULL','sensor',NOW(),'Sensor Added: temperature ipmi 2 Peripheral Temp')] Discover sensor: fanspeed, Array, , 4, ipmi, FAN, 1 , 1, 450.000, 600.000, 18975.000, 19050.000, 3150.000 , ipmi, , , , <Repeats for all sensors> …(Section cropped)… <Then the removals follow immediately afterwards> SQL[SELECT * FROM sensors AS S, devices AS D WHERE S.sensor_class='voltage' AND S.device_id = D.device_id AND D.device_id = '190' AND S.poller_type = 'ipmi'] - SQL[DELETE FROM `sensors` WHERE `sensor_id` = '223535'] SQL[INSERT INTO `eventlog` (`device_id`,`reference`,`type`,`timestamp`,`message`) VALUES ('190','NULL','sensor',NOW(),'Sensor Deleted: voltage ipmi 5 Vcore')] - SQL[DELETE FROM `sensors` WHERE `sensor_id` = '223536'] SQL[INSERT INTO `eventlog` (`device_id`,`reference`,`type`,`timestamp`,`message`) VALUES ('190','NULL','sensor',NOW(),'Sensor Deleted: voltage ipmi 6 3.3VCC')] - SQL[DELETE FROM `sensors` WHERE `sensor_id` = '223537'] SQL[INSERT INTO `eventlog` (`device_id`,`reference`,`type`,`timestamp`,`message`) VALUES ('190','NULL','sensor',NOW(),'Sensor Deleted: voltage ipmi 7 12V')] - SQL[DELETE FROM `sensors` WHERE `sensor_id` = '223538'] From what I can tell, it’s doing this for all devices with IPMI, regardless of make / model etc. - and it is only doing it to the IPMI sensors, nothing else is affected. Feedback / suggestions welcome! Cheers :) Robert Williams Custodian Data Centre Email: Robert(a)CustodianDC.com http://www.CustodianDC.com

4 4

Re: [Observium] Reset disk storage values on host
by Adam Armstrong 21 Apr '13

21 Apr '13

Output from discovery for that host with -m storage -d Andrew Lynch <lurch89(a)gmail.com> wrote: >_______________________________________________ >observium mailing list >observium(a)observium.org >http://postman.memetic.org/cgi-bin/mailman/listinfo/observium

2 1

Re: [Observium] Reset disk storage values on host
by Adam Armstrong 21 Apr '13

21 Apr '13

Run discovery. Andrew Lynch <lurch89(a)gmail.com> wrote: >_______________________________________________ >observium mailing list >observium(a)observium.org >http://postman.memetic.org/cgi-bin/mailman/listinfo/observium

2 1

Reset disk storage values on host
by Andrew Lynch 21 Apr '13

21 Apr '13

I recently changed the disk configuration on one of my monitored hosts. It seems like the discovery engine is pulling the stats incorrectly and applying them to the wrong disks. Is there an easy way (save for removing and re-adding the entire host) to flush the stats of the storage only? I don't care if it has to completely start from scratch. Thanks! -Andy -- Andrew Lynch (KD0IOE) lurch89(a)gmail.com http://andrewrlynch.com "Scientists study the world as it is; engineers create the world that has never been." —Theodore von Kármán WC

1 0

Subifs no longer showing up for Cisco ASR9K/IOS-XR device after upgrade
by Stephen Fulton 21 Apr '13

21 Apr '13

Hi all, I've been using Observium since January, and I've mostly been happy with it. I upgraded to 0.13.4.3934 yesterday, and since then, none of the sub-interfaces on a ASR9K/IOS-XR 4.3.0 router are being collected. Originally I thought it was due to an upgrade error on my part, so I deleted the host and re-added it, but the sub-interfaces are not being seen and data not being collected. Let me know what information is needed, and I'll present it. -- Stephen

1 0

Re: [Observium] IPMI weirdness
by Robert Williams 21 Apr '13

21 Apr '13

Dear Tom, Pretty please? If you get it working again, at the end there will be cake... :) -----Original Message----- From: observium-bounces(a)observium.org [mailto:observium-bounces@observium.org] On Behalf Of Adam Armstrong Sent: 20 April 2013 21:44 To: Observium Network Observation System Subject: Re: [Observium] IPMI weirdness You need to be extra nice to Tom, as the IPMI stuff is written by him :) adam. On 2013-04-20 21:25, List User wrote: > I posted this earlier (as did a couple of other people) but it was > never fixed. > > On 4/20/2013 6:33 AM, Robert Williams wrote: > > Hi All, > > For a while now it appears that all our devices which also have IPMI > cards are seeing every single sensor added and deleted (in that order) > on every poll. > > A relevant snippet from the debug of one device gives: > > (319ms) Discover sensor: temperature, Array, , 1, ipmi, System Temp, 1 > , 1, -7.000, -5.000, 80.000, 85.000, 31.000 , ipmi, , , , > > SQL[SELECT COUNT(sensor_id) FROM `sensors` WHERE `poller_type`= 'ipmi' > AND `sensor_class` = 'temperature' AND `device_id` = '190' AND > sensor_type = 'ipmi' AND `sensor_index` = '1'] > > SQL[INSERT INTO `sensors` > (`poller_type`,`sensor_class`,`device_id`,`sensor_oid`,`sensor_index`, > `sensor_type`,`sensor_descr`,`sensor_divisor`,`sensor_multiplier`,`sen > sor_limit`,`sensor_limit_warn`,`sensor_limit_low`,`sensor_limit_low_wa > rn`,`entPhysicalIndex`,`entPhysicalIndex_measured`,`measured_class`,`m > easured_entity`) VALUES > ('ipmi','temperature','190','','1','ipmi','System > Temp','1','1','85.000','80.000','-7.000','-5.000','','','','')] ( > 223532 inserted ) > > + > > SQL[INSERT INTO `eventlog` > (`device_id`,`reference`,`type`,`timestamp`,`message`) VALUES > ('190','NULL','sensor',NOW(),'Sensor Added: temperature ipmi 1 System > Temp')] Discover sensor: temperature, Array, , 2, ipmi, Peripheral > Temp, 1 , 1, -7.000, -5.000, 80.000, 85.000, 37.000 , ipmi, , , , > > SQL[SELECT COUNT(sensor_id) FROM `sensors` WHERE `poller_type`= 'ipmi' > AND `sensor_class` = 'temperature' AND `device_id` = '190' AND > sensor_type = 'ipmi' AND `sensor_index` = '2'] > > SQL[INSERT INTO `sensors` > (`poller_type`,`sensor_class`,`device_id`,`sensor_oid`,`sensor_index`, > `sensor_type`,`sensor_descr`,`sensor_divisor`,`sensor_multiplier`,`sen > sor_limit`,`sensor_limit_warn`,`sensor_limit_low`,`sensor_limit_low_wa > rn`,`entPhysicalIndex`,`entPhysicalIndex_measured`,`measured_class`,`m > easured_entity`) VALUES > ('ipmi','temperature','190','','2','ipmi','Peripheral > Temp','1','1','85.000','80.000','-7.000','-5.000','','','','')] ( > 223533 inserted ) > > + > > SQL[INSERT INTO `eventlog` > (`device_id`,`reference`,`type`,`timestamp`,`message`) VALUES > ('190','NULL','sensor',NOW(),'Sensor Added: temperature ipmi 2 > Peripheral Temp')] Discover sensor: fanspeed, Array, , 4, ipmi, FAN, 1 > , 1, 450.000, 600.000, 18975.000, 19050.000, 3150.000 , ipmi, , , , > > <Repeats for all sensors> > > …(Section cropped)… > > <Then the removals follow immediately afterwards> > > SQL[SELECT * FROM sensors AS S, devices AS D WHERE > S.sensor_class='voltage' AND S.device_id = D.device_id AND D.device_id > = '190' AND S.poller_type = 'ipmi'] - > > SQL[DELETE FROM `sensors` WHERE `sensor_id` = '223535'] > > SQL[INSERT INTO `eventlog` > (`device_id`,`reference`,`type`,`timestamp`,`message`) VALUES > ('190','NULL','sensor',NOW(),'Sensor Deleted: voltage ipmi 5 Vcore')] > - > > SQL[DELETE FROM `sensors` WHERE `sensor_id` = '223536'] > > SQL[INSERT INTO `eventlog` > (`device_id`,`reference`,`type`,`timestamp`,`message`) VALUES > ('190','NULL','sensor',NOW(),'Sensor Deleted: voltage ipmi 6 3.3VCC')] > - > > SQL[DELETE FROM `sensors` WHERE `sensor_id` = '223537'] > > SQL[INSERT INTO `eventlog` > (`device_id`,`reference`,`type`,`timestamp`,`message`) VALUES > ('190','NULL','sensor',NOW(),'Sensor Deleted: voltage ipmi 7 12V')] - > > SQL[DELETE FROM `sensors` WHERE `sensor_id` = '223538'] > > From what I can tell, it's doing this for all devices with IPMI, > regardless of make / model etc. - and it is only doing it to the IPMI > sensors, nothing else is affected. > > Feedback / suggestions welcome! > > Cheers :) > > Robert Williams > Custodian Data Centre > Email: Robert(a)CustodianDC.com > http://www.CustodianDC.com [2] > > _______________________________________________ > observium mailing list > observium(a)observium.org > http://postman.memetic.org/cgi-bin/mailman/listinfo/observium [1] > > > > Links: > ------ > [1] http://postman.memetic.org/cgi-bin/mailman/listinfo/observium > [2] http://www.CustodianDC.com > > _______________________________________________ > observium mailing list > observium(a)observium.org > http://postman.memetic.org/cgi-bin/mailman/listinfo/observium _______________________________________________ observium mailing list observium(a)observium.org http://postman.memetic.org/cgi-bin/mailman/listinfo/observium

1 0

Re: [Observium] observium post from ronbobius@gmail.com requires approval
by Adam Armstrong 20 Apr '13

20 Apr '13

> What I have done with some 'very important' devices is do just that. > Change the cron entry for specific entries to 1 minute. > > Would this break anything Adam? These are smaller Cisco devices with > few interfaces. > It won't do anything, because the RRD won't store more than one data point every 300 seconds. If you changed the RRD databases, they'd stop storing the normal datapoints, because they would be at the wrong resolution. Like I said, it can't currently be done. You could change the entire installation to be 1-minute, change the RRD template and delete all of the existing RRDs, but you wouldn't want to, because that would be a lot of load on your network and on the observium host. Also, your changes would likely be overwritten by a future update, then you'd be stuffed :) adam.

1 0

Observium Enterprise/Pro licensing
by Adam Armstrong 20 Apr '13

20 Apr '13

Hi All, At some point in the future it's likely that I'm going to split Observium into free and enterprise/pro variants. Observium has historically been developed as a fairly ad hoc project, with work being done as time permits between work projects. We've often had gaps of 6 months where there has been little work done due to other commitments. As the user-base expands this is going to become less and less viable a way of maintaining the project, and we need to be able to devote more time to keeping on top of bug reports and feature development. To be able to devote more time to the project we need to establish a revenue stream to be able to support it. We'd like comments from you guys about how we should go about splitting, what should be in each version, and what we should charge. We're considering: A hosts/ports-based licensing scheme, where you get a certain number free, and any more than that requires a license. A feature-based licensing scheme, where higher-value features such as load balancers, netapp, mac accounting, vpn tracking, etc require a license. Licensing for customer-access, where allowing customers access to the web interface requires a license. What pricing models do you think would work? Options for the ent/pro version include using the honour system, maintaining a separate password-protected SVN repository or distributing an ioncube-protected version. I would prefer to go the honour system route, but I'm not sure how well that would work. Thanks, adam.

16 29

fisheye
by Crozier, Doug 19 Apr '13

19 Apr '13

Is anyone else having problems getting to http://fisheye.observium.org/changelog/Observium?

3 2

Re: [Observium] polling interval
by Adam Armstrong 19 Apr '13

19 Apr '13

This is not possible with observium. Adam. J Z <jzthegeek(a)gmail.com> wrote: >_______________________________________________ >observium mailing list >observium(a)observium.org >http://postman.memetic.org/cgi-bin/mailman/listinfo/observium

1 0

polling interval
by J Z 19 Apr '13

19 Apr '13

Long-time user and lurker. Many thanks to Adam and those who volunteer their time on this awesome project. I was wondering if there was a way to modify the polling interval (aside from modifying the crontab entry). I know that there was a lot of work that had to be done to decrease the polling interval from 5 to 1 minutes in Cacti, so I imagine it's not as simple as simply changing the crontab entry for Observium to monitor a switch's traffic utilization every 60 seconds. Has anyone successfully done this? Is there something simple I'm missing to get this to work? Many thanks!

1 0

Re: [Observium] APC UPS and remaining Runtime
by Adam Armstrong 19 Apr '13

19 Apr '13

Hi, We currently have no sensor type to capture this. It is on the list, but as with everything else, no time and no resources. Adam. Chris Blake <chrisrblake93(a)gmail.com> wrote: >_______________________________________________ >observium mailing list >observium(a)observium.org >http://postman.memetic.org/cgi-bin/mailman/listinfo/observium

2 1

APC UPS and remaining Runtime
by Chris Blake 19 Apr '13

19 Apr '13

Hello, Not sure if I am doing this right (using the mailing list) so please don't kill me if I am. I currently have a APC UPS SMT2200RM2U, and I just recently added it to my Observium panel vi SNMP v2c. I see it logs everything from the current load to battery temp, but I am kind of surprised it does not log Battery Run Time Remaining. I checked in the latest APC powernet.mib file, and there is a function to call this. So, I updated the /opt/observium/mib/apc/powernet.mib to the latest version, but observium still does not log or show the remaining run time, which leads me to believe it is not coded into the script. Just wondering if this is a plan for the future, or am I doing everything wrong? Thanks, Chris B

1 0

Polling Rate on a 3750 Stack
by Michael Sweikata 18 Apr '13

18 Apr '13

Is anyone else having huge response times in their polling of a Cisco 3750 stack? I've increased the number of pollers I have to something close to 17, but my 3750s seem to take forever to respond (anywhere between 200 - 999.99+ seconds). It may be an issue on my 3750s, but my polling intervals on my devices is several hours. I have 2950s and 6509s that don't seem to have any issue responding in a short amount of time (<20 seconds).

6 11

Re: [Observium] missing directories in observium
by Tom Laermans 17 Apr '13

17 Apr '13

Ladies and gentlemen, Adam is practicing for his commercial support idea. How would you rate this response on a scale from 1 to A++ WOULD SVN UP AGAIN? ;-) Sent from my mobile, please excuse brevity and spelling errors. ----- Reply message ----- From: "Adam Armstrong" <adama(a)memetic.org> To: "Observium Network Observation System" <observium(a)observium.org> Subject: [Observium] missing directories in observium Date: Wed, Apr 17, 2013 09:14 On Thu, 11 Apr 2013 19:54:09 +0000, LUKE REAGOR <LUKE.REAGOR(a)sville.us> wrote: > I just installed Observium following the instructions on > http://www.observium.org/wiki/Ubuntu_SVN_Installation and it all went on > with no problems. When I go to the url http://localhost I get the logon for > Observium. When I log on, I get the page showing the world map and > everything looks good. However, when I click on any link I get a 404 saying > it doesn't exist. Ex. when I click on Add User, I get a 404 saying > /adduser/ was not found. I look in the filesystem and don't see those > directories in /opt/observium or /opt/observium/html. Did it not get > all the directories and files from the svc? I did that part three times to > make sure. I even look in the svc > (http://www.observium.org/svn/observer/trunk) from a web browser and can't > find those directories. Hi, You're missing mod_rewrite or AllowOverride All on the directory in the Apache configuration. Thanks, adam. _______________________________________________ observium mailing list observium(a)observium.org http://postman.memetic.org/cgi-bin/mailman/listinfo/observium

3 2

missing directories in observium
by LUKE REAGOR 17 Apr '13

17 Apr '13

I just installed Observium following the instructions on http://www.observium.org/wiki/Ubuntu_SVN_Installation and it all went on with no problems. When I go to the url http://localhost I get the logon for Observium. When I log on, I get the page showing the world map and everything looks good. However, when I click on any link I get a 404 saying it doesn't exist. Ex. when I click on Add User, I get a 404 saying /adduser/ was not found. I look in the filesystem and don't see those directories in /opt/observium or /opt/observium/html. Did it not get all the directories and files from the svc? I did that part three times to make sure. I even look in the svc (http://www.observium.org/svn/observer/trunk) from a web browser and can't find those directories. Luke Reagor Network Administrator Stephenville ISD "I am not a teacher only a fellow traveller of whom you asked the way. I pointed ahead ahead of myself as well as of you." -George Bernard Shaw

2 1

Re: [Observium] Observium Enterprise/Pro licensing
by Adam Armstrong 16 Apr '13

16 Apr '13

For the port-based model we would likely exclude virtual ports. It would likely only exist to catch users with 8 vss and 10k ports :-) In terms of support and development, we would likely push all new feature development to the commercial version. Support and feature requests from licensees would be prioritised too. This is already the case for our existing commercial sponsor. Roughly 50% of development work is directly requested features from them. We certainly want to keep the free version usable, and we don't want to separate the code bases, as that would slow progress a lot. I think the balance between keeping everything usable and maintaining a carrot to encourage people to license will be difficult. Pricing is also difficult to decide on. If the majority of users won't pay, it will be higher than if we have more licensees. If every user paid $10, we would probably be fine. I suspect not even 5% will be willing to pay, though. Adam. "Hibler, Florian" <florian.hibler(a)kaiaglobal.com> wrote: >Hi Adam, >thanks for telling the list about your thoughts on commercializing >Observium and giving us the opportunity to talk about the licensing >scheme before you actually decide which way to go. > >I need to agree with Nikolay, that "port-based" shouldn't be the way to >go, as many devices just add tons of virtual ports. For me "host-based" >sounds pretty fair. > >Also I would prefer to use the "honor system" route as well. Keepeing >the source code open makes it still easy for people to contribute to >certain features or customize Observium for their own needs. Once a >product is commercialized you will have piracy, thats what I am pretty >sure of. Although I am pretty sure that this community will honor your >work and what you have done. Observium is a great product and it helps >me with my daily work. > >Can you already outline some pricing you have in mind and/or the >differences between free/pro/enterprise editions? Once there is money >behind that whole thing, what would actually change? How would you deal >with the support, feature requests, etc.? > >Just my 2 cent and hope it was a bit helpful! > >Best regards, >Florian > >-- >Florian Hibler >Chief Technical Officer >eMail: florian.hibler(a)kaiaglobal.com > >Kaia Global Networks Limited >Internet: http://www.kaiaglobal.com >Company No. 08257877 >Registered Office: High Wycombe, UK > >Notice: This transmittal and/or attachments may be privileged or >confidential. If you are not the intended recipient, you are hereby >notified that you have received this transmittal in error; any review, >dissemination, or copying is strictly prohibited. If you received this >transmittal in error, please notify us immediately by reply and >immediately delete this message and all its attachments. Thank you. > >On 4/15/13 24:58, Adam Armstrong wrote: >> >> Hi All, >> >> At some point in the future it's likely that I'm going to split Observium >> into free and enterprise/pro variants. >> >> Observium has historically been developed as a fairly ad hoc project, with >> work being done as time permits between work projects. We've often had gaps >> of 6 months where there has been little work done due to other commitments. >> >> As the user-base expands this is going to become less and less viable a >> way of maintaining the project, and we need to be able to devote more time >> to keeping on top of bug reports and feature development. To be able to >> devote more time to the project we need to establish a revenue stream to be >> able to support it. >> >> We'd like comments from you guys about how we should go about splitting, >> what should be in each version, and what we should charge. >> >> We're considering: >> >> A hosts/ports-based licensing scheme, where you get a certain number free, >> and any more than that requires a license. >> A feature-based licensing scheme, where higher-value features such as load >> balancers, netapp, mac accounting, vpn tracking, etc require a license. >> Licensing for customer-access, where allowing customers access to the web >> interface requires a license. >> >> What pricing models do you think would work? >> >> Options for the ent/pro version include using the honour system, >> maintaining a separate password-protected SVN repository or distributing an >> ioncube-protected version. >> >> I would prefer to go the honour system route, but I'm not sure how well >> that would work. >> >> Thanks, >> adam. >> _______________________________________________ >> observium mailing list >> observium(a)observium.org >> http://postman.memetic.org/cgi-bin/mailman/listinfo/observium >> >_______________________________________________ >observium mailing list >observium(a)observium.org >http://postman.memetic.org/cgi-bin/mailman/listinfo/observium

7 11

Re: [Observium] Observium Enterprise/Pro licensing
by Adam Armstrong 16 Apr '13

16 Apr '13

Shut up, heretic. Tom Laermans <tom.laermans(a)powersource.cx> wrote: >On Tue, 2013-04-16 at 11:58 +0200, Sebastien Guilbaud wrote: >> >> With regards to "paying members get extra rights and decent >> support", >> this is certainly the goal. BOFH-replies on the mailing list >> will stay >> for the community support though ;> >> >> >> The day Adam answers politely about nginx problems will be the sign of >> severe mental illness :-) >> > >For extra fun, add in PostgreSQL and Ruby. Maybe Lighty? > >Tom > > >_______________________________________________ >observium mailing list >observium(a)observium.org >http://postman.memetic.org/cgi-bin/mailman/listinfo/observium

1 0

Re: [Observium] webpage showing "device" path not found
by Ben .T.George 16 Apr '13

16 Apr '13

Thanks that solved. by doing some changes in virtualhost's i followed http://www.observium.org/wiki/RHEL_SVN_Installation this for installation. now my 2 servers listing under devices tab. but on the main page i am getting one "permission denied" error message with red background. Also when i click client name top right corner 4 graphs are not loading and the error message showing there is "Draw Error" regards Ben On Tue, Apr 16, 2013 at 9:56 AM, Dermot Williams <dermot(a)deadlocked.org>wrote: > Make sure you've enabled mod_rewrite (per the instructions) and that > there's a file called .htaccess in DocumentRoot. Oh, and that that file > actually has stuff in it. > > Dermot > > > On Tue, Apr 16, 2013 at 7:37 AM, Tom Laermans <tom.laermans(a)powersource.cx > > wrote: > >> Hi Ben. >> >> Again, another mail indicating you did not follow the documentation and >> the installation was not done correctly. >> >> Please reinstall Observium following ALL of the instructions as detailed >> on the web page. >> >> Tom >> >> >> On 16/04/2013 6:39, Ben .T.George wrote: >> >> HI >> >> I installed and configured observium as per the document mentioned on >> wiki . looks like everything is working and i got the web gui.I added 2 >> devices. it's showing 2 devices added and it's up.. But when i click on any >> of the hostname, it's giving the error like "404 the requested URL >> /devices/ was not found on this server >> >> I check on the html directory and the device folder is not there. How to >> fix this isse.? >> >> Thanks & Regards, >> Ben >> >> >> >> _______________________________________________ >> observium mailing listobservium@observium.orghttp://postman.memetic.org/cgi-bin/mailman/listinfo/observium >> >> >> >> _______________________________________________ >> observium mailing list >> observium(a)observium.org >> http://postman.memetic.org/cgi-bin/mailman/listinfo/observium >> >> > > _______________________________________________ > observium mailing list > observium(a)observium.org > http://postman.memetic.org/cgi-bin/mailman/listinfo/observium > >

1 0

webpage showing "device" path not found
by Ben .T.George 16 Apr '13

16 Apr '13

HI I installed and configured observium as per the document mentioned on wiki . looks like everything is working and i got the web gui.I added 2 devices. it's showing 2 devices added and it's up.. But when i click on any of the hostname, it's giving the error like "404 the requested URL /devices/ was not found on this server I check on the html directory and the device folder is not there. How to fix this isse.? Thanks & Regards, Ben

3 2

Re: [Observium] Observium Enterprise/Pro licensing
by Adam Armstrong 15 Apr '13

15 Apr '13

I suppose and important question would be, given a realistic pricing model, how many of you would, in principle, pay for a license, and how many of you would make do with whatever remains free? Adam. Adam Armstrong <adama(a)observium.org> wrote: > >Hi All, > >At some point in the future it's likely that I'm going to split Observium >into free and enterprise/pro variants. > >Observium has historically been developed as a fairly ad hoc project, with >work being done as time permits between work projects. We've often had gaps >of 6 months where there has been little work done due to other commitments. > >As the user-base expands this is going to become less and less viable a >way of maintaining the project, and we need to be able to devote more time >to keeping on top of bug reports and feature development. To be able to >devote more time to the project we need to establish a revenue stream to be >able to support it. > >We'd like comments from you guys about how we should go about splitting, >what should be in each version, and what we should charge. > >We're considering: > >A hosts/ports-based licensing scheme, where you get a certain number free, >and any more than that requires a license. >A feature-based licensing scheme, where higher-value features such as load >balancers, netapp, mac accounting, vpn tracking, etc require a license. >Licensing for customer-access, where allowing customers access to the web >interface requires a license. > >What pricing models do you think would work? > >Options for the ent/pro version include using the honour system, >maintaining a separate password-protected SVN repository or distributing an >ioncube-protected version. > >I would prefer to go the honour system route, but I'm not sure how well >that would work. > >Thanks, >adam. >_______________________________________________ >observium mailing list >observium(a)observium.org >http://postman.memetic.org/cgi-bin/mailman/listinfo/observium

1 0

host adding command not completing
by Ben .T.George 15 Apr '13

15 Apr '13

HI i tried to add host , please check the below section: ./addhost.php ben.test.net any v2c Trying community any ... No reply on community any using v2c Could not reach ben.test.net with given SNMP community using v2c Trying community any ... No reply on community any using v2c Could not reach ben.test.net with given SNMP community using v2c Observium v0.13.4.3917 Add Host Tool Usage (SNMPv1/2c): ./addhost.php <hostname> [community] [v1|v2c] [port] [udp|udp6|tcp|tcp6] Usage (SNMPv3) : Config Defaults : ./addhost.php <hostname> any v3 [user] [port] [udp|udp6|tcp|tcp6] No Auth, No Priv : ./addhost.php <hostname> nanp v3 [user] [port] [udp|udp6|tcp|tcp6] Auth, No Priv : ./addhost.php <hostname> anp v3 <user> <password> [md5|sha] [port] [udp|udp6|tcp|tcp6] Auth, Priv : ./addhost.php <hostname> ap v3 <user> <password> <enckey> [md5|sha] [aes|dsa] [port] [udp|udp6|tcp|tcp6] Remember to run discovery for the host afterwards. i did this setup on local machine and i want to ad this local machine as host.Is it possible to add like this.? But i am getting the above error message. it's trying to get through snmp. but in my machine snmp is running. please help me to fix this issue Thanks & Regards, Ben

2 2

Re: [Observium] adduser.php giving mysql error
by Ben .T.George 15 Apr '13

15 Apr '13

HI Thanks for the replay. i solved the issue by rerunning the DB table setup script Thanks & Regards, Ben On Sun, Apr 14, 2013 at 1:34 PM, Tom Laermans <tom.laermans(a)powersource.cx>wrote: > You don't have the database tables set up. > > > On 14/04/2013 11:35, Ben .T.George wrote: > > HI > > Thanks for the reply..i changed database variables on config.php file and > the above error got solved. > > now i am getting some other error. > > # ./adduser.php ben redhat 1 > > User ben creation failed ! > > please help me to solve this issue. > > Thanks & Regards, > Ben > > > On Sun, Apr 14, 2013 at 9:55 AM, Tom Laermans < > tom.laermans(a)powersource.cx> wrote: > >> On 14/04/2013 8:52, Kamoltorn Theppunya (Tang) wrote: >> >> >> >> It’s caused of special character in your mysql’s password. >> >> >> >> There have 2 solutions that I have solved. >> >> >> >> 1. Change you mysql password not to use character like &%*)% >> >> 2. If you don’t want to change password try to use single quote in >> password term like this >> >> >> >> ./adduser.php user ‘yourpa$$word’ 1 >> >> >> >> >> I'm having a hard time connecting solution 1 to solution 2 to the actual >> cause. >> >> - Using a different password for your Observium user makes no difference >> for the MySQL connection. >> - Special characters in your MySQL password should be no problem. >> >> The real reason: >> >> // Database config >> $config['db_host'] = "localhost"; >> $config['db_user'] = "USERNAME"; >> $config['db_pass'] = "PASSWORD"; >> $config['db_name'] = "observium"; >> >> You did not configure the database credentials correctly. (and will not >> have a database import through the sql schema updater, as it could not have >> connected to MySQL as well) >> >> Tom >> >> >> >> Best Regards. >> >> >> >> >> >> >> >> *From:* observium-bounces(a)observium.org [ >> mailto:observium-bounces@observium.org <observium-bounces(a)observium.org>] >> *On Behalf Of *Ben .T.George >> *Sent:* Sunday, April 14, 2013 1:35 PM >> *To:* observium(a)observium.org >> *Subject:* [Observium] adduser.php giving mysql error >> >> >> >> HI Mailing List >> >> >> >> i followed http://www.observium.org/wiki/RHEL_SVN_Installation this >> tutorial. >> >> when i run ./adduser.php <username> <password> 1 >> >> i am getting mysql error like below >> >> <h2> observer MySQL Error</h2> Access denied for user 'USERNAME'@'localhosr >> ' (using password: YES) >> >> for me the below mysql table creation and access giving was >> successful. I used below command >> >> mysql -u root -p >> >> <mysql root password> >> >> mysql> CREATE DATABASE observium; >> >> mysql> GRANT ALL PRIVILEGES ON observium.* TO 'observium'@'localhost' >> >> -> IDENTIFIED BY '<observium db password>'; >> >> >> >> Thanks & Regards, >> Ben >> >> >> _______________________________________________ >> observium mailing listobservium@observium.orghttp://postman.memetic.org/cgi-bin/mailman/listinfo/observium >> >> >> >> _______________________________________________ >> observium mailing list >> observium(a)observium.org >> http://postman.memetic.org/cgi-bin/mailman/listinfo/observium >> >> > > _______________________________________________ > observium mailing listobservium@observium.orghttp://postman.memetic.org/cgi-bin/mailman/listinfo/observium > > >

1 0

Re: [Observium] adduser.php giving mysql error
by Adam Armstrong 14 Apr '13

14 Apr '13

localhosr ? "Ben .T.George" <bentech4you(a)gmail.com> wrote: >_______________________________________________ >observium mailing list >observium(a)observium.org >http://postman.memetic.org/cgi-bin/mailman/listinfo/observium

1 0

Re: [Observium] adduser.php giving mysql error
by Ben .T.George 14 Apr '13

14 Apr '13

HI Thanks for the reply..i changed database variables on config.php file and the above error got solved. now i am getting some other error. # ./adduser.php ben redhat 1 User ben creation failed ! please help me to solve this issue. Thanks & Regards, Ben On Sun, Apr 14, 2013 at 9:55 AM, Tom Laermans <tom.laermans(a)powersource.cx>wrote: > On 14/04/2013 8:52, Kamoltorn Theppunya (Tang) wrote: > > ** ** > > It’s caused of special character in your mysql’s password.**** > > ** ** > > There have 2 solutions that I have solved. **** > > ** ** > > 1. Change you mysql password not to use character like &%*)% **** > > 2. If you don’t want to change password try to use single quote in > password term like this **** > > ** ** > > ./adduser.php user ‘yourpa$$word’ 1**** > > ** ** > > > I'm having a hard time connecting solution 1 to solution 2 to the actual > cause. > > - Using a different password for your Observium user makes no difference > for the MySQL connection. > - Special characters in your MySQL password should be no problem. > > The real reason: > > // Database config > $config['db_host'] = "localhost"; > $config['db_user'] = "USERNAME"; > $config['db_pass'] = "PASSWORD"; > $config['db_name'] = "observium"; > > You did not configure the database credentials correctly. (and will not > have a database import through the sql schema updater, as it could not have > connected to MySQL as well) > > Tom > > ** ** > > Best Regards.**** > > ** ** > > ** ** > > ** ** > > *From:* observium-bounces(a)observium.org [ > mailto:observium-bounces@observium.org <observium-bounces(a)observium.org>] > *On Behalf Of *Ben .T.George > *Sent:* Sunday, April 14, 2013 1:35 PM > *To:* observium(a)observium.org > *Subject:* [Observium] adduser.php giving mysql error**** > > ** ** > > HI Mailing List > **** > > ** ** > > i followed http://www.observium.org/wiki/RHEL_SVN_Installation this > tutorial.**** > > when i run ./adduser.php <username> <password> 1 **** > > i am getting mysql error like below**** > > <h2> observer MySQL Error</h2> Access denied for user 'USERNAME'@'localhosr > ' (using password: YES) > > **** > > for me the below mysql table creation and access giving was successful. I > used below command**** > > mysql -u root -p**** > > <mysql root password>**** > > mysql> CREATE DATABASE observium;**** > > mysql> GRANT ALL PRIVILEGES ON observium.* TO 'observium'@'localhost'**** > > -> IDENTIFIED BY '<observium db password>';**** > > ** ** > > Thanks & Regards, > Ben**** > > > _______________________________________________ > observium mailing listobservium@observium.orghttp://postman.memetic.org/cgi-bin/mailman/listinfo/observium > > > > _______________________________________________ > observium mailing list > observium(a)observium.org > http://postman.memetic.org/cgi-bin/mailman/listinfo/observium > >

2 1

Access denied to fabric graphs
by Robert Williams 14 Apr '13

14 Apr '13

Hi, Got an odd one here, suddenly we are getting access denied to all 6500/7600 fabric graphs on all devices: [cid:image001.png@01CE3697.EBD353E0] When you click on the * graph you get: [cid:image002.png@01CE3697.EBD353E0] From the URL: http://<servername>/graphs/to=1365669262/device=43/mod=1/chan=0/type=c6kxbar_util/from=1365582862/<http://%3cservername%3e/graphs/to=1365669262/device=43/mod=1/chan=0/type=c6kxbar_util/from=1365582862/> We auto SVN update, so I can’t be certain exactly when this broke, but I’m pretty sure it was ok a few days ago. I’m logged in as “admin” and have never changed (or even really looked at) the permissions page, but here is a screenshot in case I’ve failed to add something I’m meant to: [cid:image003.png@01CE3698.81307AD0] Any assistance much appreciated :) Cheers! Robert Williams Custodian Data Centre Email: Robert(a)CustodianDC.com http://www.CustodianDC.com

1 2

adduser.php giving mysql error
by Ben .T.George 14 Apr '13

14 Apr '13

HI Mailing List i followed http://www.observium.org/wiki/RHEL_SVN_Installation this tutorial. when i run ./adduser.php <username> <password> 1 i am getting mysql error like below <h2> observer MySQL Error</h2> Access denied for user 'USERNAME'@'localhosr ' (using password: YES) for me the below mysql table creation and access giving was successful. I used below command mysql -u root -p <mysql root password> mysql> CREATE DATABASE observium; mysql> GRANT ALL PRIVILEGES ON observium.* TO 'observium'@'localhost' -> IDENTIFIED BY '<observium db password>'; Thanks & Regards, Ben <observium(a)observium.org>

3 3

Alert email nightmare!
by List User 14 Apr '13

14 Apr '13

After a recent update, I have this one device which sends me these alerts, multiple times. I've got around 250x of these over the last 2 days. Observium :: Network Observation and Monitoring Device Rebooted : bravo.redspeedservers.com 4 days, 6h 11m 40s ago. ------------------- Observium :: Network Observation and Monitoring Device:bravo.redspeedservers.com Interface: eth0 Is this a bug or something?

2 1

Re: [Observium] mac-accounting rolls over at ~100Mbit/s
by Adam Armstrong 11 Apr '13

11 Apr '13

Didnt I already fix this? Mattias Gyllenvarg <Mattias.Gyllenvarg(a)Bredband2.se> wrote: >_______________________________________________ >observium mailing list >observium(a)observium.org >http://postman.memetic.org/cgi-bin/mailman/listinfo/observium

2 1

mac-accounting rolls over at ~100Mbit/s
by Mattias Gyllenvarg 11 Apr '13

11 Apr '13

Dear Adam I was looking at the mac-accounting feature and noticed that it never goes over ~114Mbit/s. Seem to remember that the same thing happend in cacti when using 32bit values. Device is Cisco ASR9010 RSP2. PS. Sweet project, much appreciated. -- *Med Vänliga Hälsningar - Best Regards* *Mattias Gyllenvarg* *Nätutveckling* Bredband2 Tel: +46 406219712

2 2