- observium - lists.observium.org

Various questions (BGP/Discovery/Pseudowires/Hostname truncating)
by Jason Lixfeld 22 Oct '12

22 Oct '12

First off, let me say thanks to the developers of Observium. This piece of code is one of the most amazing pieces of code I have used for my network monitoring purposes to date. I have a few questions that I'm hoping someone can answer - BGP: ---- I have a few eBGP speakers that live inside a VRF. Observium picks up the VRFs just fine, but the routing tab for the device only seems to show the BGP sessions that exist in the global (non-VRF) table. Is it possible to show the BGP sessions that exist inside a VRF? Pseudowires: ------------ I see lots of data inside the pseudowires table on the observium database, but I don't see any of that inside the pseudowires tab from within a device where I know pseudowires are configured. These pseudowires exist on IOS boxes, IOS-XR boxes and IOS-XE boxes. I do see a few. Observium > Ports > Pseudowires shows me 11 pseuowires. 6 of them are duplicates of one another while 5 are unique. The database shows hundreds. While looking through a ./discovery.php -d I ran against one of our XR boxes, I did see this: Cisco Pseudowires : SQL[SELECT * FROM `pseudowires` WHERE `device_id` = '1'] DEBUG: SNMP Auth options = -v2c -c ************ /usr/bin/snmpbulkwalk -v2c -c ************ -OQUs -m CISCO-IETF-PW-MPLS-MIB -M /opt/observium/mibs udp:router:161 cpwVcID cpwVcID = No Such Instance currently exists at this OID DEBUG: SNMP Auth options = -v2c -c ************ /usr/bin/snmpbulkwalk -v2c -c ************ -OQUs -m CISCO-IETF-PW-MPLS-MIB -M /opt/observium/mibs udp:router:161 cpwVcName cpwVcName = No Such Instance currently exists at this OID DEBUG: SNMP Auth options = -v2c -c ************ /usr/bin/snmpbulkwalk -v2c -c ************ -OQUs -m CISCO-IETF-PW-MPLS-MIB -M /opt/observium/mibs udp:router:161 cpwVcType cpwVcType = No Such Instance currently exists at this OID DEBUG: SNMP Auth options = -v2c -c ************ /usr/bin/snmpbulkwalk -v2c -c ************ -OQUs -m CISCO-IETF-PW-MPLS-MIB -M /opt/observium/mibs udp:router:161 cpwVcPsnType cpwVcPsnType = No Such Instance currently exists at this OID DEBUG: SNMP Auth options = -v2c -c ************ /usr/bin/snmpbulkwalk -v2c -c ************ -OQUs -m CISCO-IETF-PW-MPLS-MIB -M /opt/observium/mibs udp:router:161 cpwVcDescr cpwVcDescr = No Such Instance currently exists at this OID DEBUG: SNMP Auth options = -v2c -c ************ /usr/bin/snmpbulkwalk -v2c -c ************ -OQUs -m CISCO-IETF-PW-MPLS-MIB -M /opt/observium/mibs udp:router:161 cpwVcMplsPeerLdpID cpwVcMplsPeerLdpID = No Such Instance currently exists at this OID That seems to show that pseudowire support for XR isn't there yet? Is that on the road map, by chance? Discovery: ---------- There are a couple of devices that aren't getting discovered for some reason. The IP that their hostname resolves to is within the 'nets' arrays configured inside config.php and I have other SNMP devices that reach those boxes, so I know the SNMP side is sound. Likewise, I can see the device in question in the CDP table of an adjacent device, so I know that part is working as well. I've looked at a ./discovery -d of an adjacent device hoping to see a clue about why the device is being skipped, but nothing is striking out at me. Hostname truncating: -------------------- We name our devices <device><device_number>.<pop>.<city>.domain.tld. In the devices view, it shows the full device name no problem. In the VRF view, for example, however, it shows only <device><device_number>, truncating the pop and city portions. If anyone has any insight or guidance on these issues, I'd be grateful! Thanks in advance.

2 3

Unable to get non-MySQL Auth working - 500 error
by Chris Moody 19 Oct '12

19 Oct '12

Hello. First off, let me say that this project is AWESOME!!! I am blown away at how comprehensive the graphing is across our network gear. Bravo. That said, I need a hand in figuring out why I cannot seem to get any auth-method other than mysql to work. If I so much as toggle to any other auth-method (ldap or http-auth), I immediately get a 500 'Internal Error' when I try to hit the Observium login page. I'm ultimately trying to get auth to the application to be handled via LDAP, but I can do it via either the observium-ldap component or via http-auth combined with mod_authz_ldap... makes me no difference. I've had some success w. mod_authz_ldap in that I can get authentication to actually pass for a user account (I am able to bypass the login promptsuccessfully), but as soon as I auth, I hit the dreaded 500. I'm not able to find anything in any http logs regarding what might be possibly throwing the 500. lsof lists any open filehandles for httpd, so I've checked every possible file that logs could be directed to, but no cluesthus far. This particular box is a RHEL5 running Observium 0.12.10.3396 Any ideas are welcome. Cheers, -Chris

2 1

unix agent polling broken in 3397 - likely a couple of versions before too
by Chris Stone 18 Oct '12

18 Oct '12

No data for servers using the unix agent for a couple of weeks now. Have Observium build 3397 installed. Just had a chance to do some troubleshooting... Running poller update on a specific server in debug mode reveals the apparent problem: ======================================================================================= including: includes/polling/unix_agent.inc.php PHP Warning: include(includes/polling/unix_agent.inc.php): failed to open stream: No such file or directory in /opt/observium/includes/polling/functions.inc.php on line 192 Warning: include(includes/polling/unix_agent.inc.php): failed to open stream: No such file or directory in /opt/observium/includes/polling/functions.inc.php on line 192 PHP Warning: include(): Failed opening 'includes/polling/unix_agent.inc.php' for inclusion (include_path='.:/usr/share/pear:/usr/share/php') in /opt/observium/includes/polling/functions.inc.php on line 192 Warning: include(): Failed opening 'includes/polling/unix_agent.inc.php' for inclusion (include_path='.:/usr/share/pear:/usr/share/php') in /opt/observium/includes/polling/functions.inc.php on line 192 ======================================================================================= Fixed (worked around) by running: ln -s /opt/observium/includes/polling/unix-agent.inc.php /opt/observium/includes/polling/unix_agent.inc.php Added to Jira as well: http://jira.observium.org/browse/OBSERVIUM-154 Chris -- Chris Stone AxisInternet, Inc. www.axint.net

2 4

Backing Up Observium
by Mahomed Hussein 18 Oct '12

18 Oct '12

Hi I need to ensure our install of Observium is fully backed up and I'd rather not backup the entire VM. Could you please confirm if all I need to backup are: * /opt/observium directory * Observium database * /etc/apache2/sites-enabled/000-default What I'd like to achieve from the backups is to spin up a new VM instance, run through the install steps to get the required components installed, then restore the files so that Observium then just runs as it was at the point of the last backup. I have tried checking the FAQ and a search of the mailing list but I couldn't find any specific instructions. Any help will be greatly appreciated. Thanks in advance. Kind regards, Mahomed Hussein Custodian DataCentre email: Mahomed(a)CustodianDC.com

10 23

Port Utilization Alerts
by Adam Blackington 18 Oct '12

18 Oct '12

Observium folk, Anyway I can configure alerting based on utilization? For example, if I want to receive an email if a port hits 75% port utilization. --Adam Blackington

3 2

HIgh CPU on ASR
by Roza 17 Oct '12

17 Oct '12

After adding ASR 1002 (used as PPPOE termination) to Observium, CPU on ASR raised to 90%, and stayed that way, untill I blocked it (after 30 minutes). Normal CPU is aroiund 10%. Is this a normal? Don't think so.... ASR1002 has cca 5000 connected users. iRoza

4 4

Cisco CUCM Support
by John Macleod 13 Oct '12

13 Oct '12

Has anyone looked into fully supporting the Cisco UCM stuff? It looks like it is mainly a mix of Cisco CCM and Cisco/HP/IBM hardware mibs depending on what platform it is on. I specifically have UCM5xx series, the SMB PBX in a box - CME variant and the larger full Unified Communications Manager 5000 systems, running the linux-derived UCM apps on Cisco branded UCS, IBM or HP hardware. I did find this: http://smbitsolutions.wordpress.com/2011/05/02/2-may-2011-1341/ I do have a system I could expose for testing if someone is up for this? I have the same request for Cisco CUBE (SIP-SIP) gateway support, which looks like it is just a mib on the relevant supported hardware. I believe it is the same mib for standard SIP monitoring on other Cisco platforms, but I could be wrong. At the moment the UCM 5000 shows as a generic server, with standard net-snmp type support, and the CUBE devices just show as routers. I currently use a Cacti install alongside my Observium systems for the sole purpose of monitoring the above. Would be nice to stick to one. Thanks, John

1 0

Observium behind proxy
by Max León 10 Oct '12

10 Oct '12

Hello, I need to publish an observium instance to the DMZ. The simplest approach is by proxy using Nginx. I have the configuration set, well I think, problem is that on authentication it loops on the login, any idea why this might be? Thank you. Max Atentamente, Max León

3 3

vlan ids nor port member not updated ??
by Rachid Zarouali 08 Oct '12

08 Oct '12

Hy all, i'm using observium since 2 weeks now, i found a strange behavior. it can detect vlan defined in a switch at first, but it doesn't update them (removed or added vlans) nor update vlan port member. is there anything wrong with my observium deployment ? switch: D-Link DGS-3120 and D-Link DES-1210 any clues truely appreciated, i can't figure out what is going wrong :( Regards, Xinity

2 3

web site and svn down
by Chris Stone 06 Oct '12

06 Oct '12

Problems with web site and svn? Not able to access either from the US this morning... [root@axis-noc opt]# mtr --report --report-cycles=10 www.observium.org HOST: axis-noc.axint.net Loss% Snt Last Avg Best Wrst StDev 1.|-- ai-core.axint.net 0.0% 10 1.4 1.0 0.5 2.9 0.7 2.|-- fa0-2.na01.b009854-0.den0 0.0% 10 1.3 1.2 0.7 1.6 0.3 3.|-- vl3509.mag02.den01.atlas. 0.0% 10 2.7 23.6 0.6 81.8 36.0 4.|-- te7-4.ccr01.den01.atlas.c 0.0% 10 1.4 52.6 0.7 174.7 63.0 5.|-- te0-2-0-7.mpd21.mci01.atl 0.0% 10 13.3 13.7 12.6 16.0 1.1 6.|-- te0-2-0-5.ccr21.dfw01.atl 0.0% 10 23.8 23.5 22.6 24.9 0.7 7.|-- te2-1.ccr01.dfw03.atlas.c 20.0% 10 23.5 86.3 23.5 178.2 62.5 8.|-- teleglobe.dfw03.atlas.cog 0.0% 10 24.4 23.7 22.5 25.2 1.1 9.|-- dal-2-6k.tx.us 0.0% 10 23.5 26.1 23.2 34.0 3.7 10.|-- dal-1-6k.tx.us 0.0% 10 23.5 23.8 23.4 24.2 0.3 11.|-- nwk-1-6k.nj.us 30.0% 10 98.8 61.2 53.7 98.8 16.7 12.|-- ??? 100.0 10 0.0 0.0 0.0 0.0 0.0 13.|-- rbx-g1-a9.fr.eu 0.0% 10 127.6 136.8 127.4 211.8 26.4 14.|-- vss-5a-6k.fr.eu 0.0% 10 127.6 139.8 127.6 201.4 25.8 | `|-- 178.33.100.30 15.|-- ??? 100.0 10 0.0 0.0 0.0 0.0 0.0 -- Chris Stone AxisInternet, Inc. www.axint.net

6 6

Watchguard Support
by John Macleod 05 Oct '12

05 Oct '12

I see that there is a some type of discovery entries for the "firebox" however there is no firebox include file. I have two Watchguard Firebox XTM810 devices that I would like to monitor. Am I missing something, or is there a reason they are not present? Thanks, John

1 0

Re: [Observium] SSD for better performance
by Adam Armstrong 05 Oct '12

05 Oct '12

Its the android mail client. It has no config options. Might switch to something else. Adam. Tom Laermans <tom.laermans(a)powersource.cx> wrote: >_______________________________________________ >observium mailing list >observium(a)observium.org >http://postman.memetic.org/cgi-bin/mailman/listinfo/observium

4 6

custom graph questions, almost done
by Mark Chaney 05 Oct '12

05 Oct '12

So I am not sure if this belongs on the dev list as I am not really doing core dev work and I am not currently subscribed to it. I will definitely contribute my work back to you guys though (if you wanted it). Its for graphing md3000i performance data (stupid thing isnt accessible through snmp, so its basically data attached to the management host). Anyway, I have been following the following example: http://www.observium.org/wiki/Developing/NewGraph and I am not sure about few things. 1) What are the following values for? Specifically the Pages/pages part. I understand that it cycles through the stats that i have setup, but I am not sure about the words Pages/pages. foreach ($stats as $stat) { $i++; $rrd_list[$i]['filename'] = $rrd_filename; $rrd_list[$i]['descr'] = "Pages " . ucfirst($stat); $rrd_list[$i]['ds'] = "pages" . ucfirst($stat); } 2) Now that I have the agent script created and the rest of the scripts in the tutorial, how am I supposed to activate it for a host? I am assuming it should probably be "activated" within the applications list? If so, I am guessing there is logic missing in that example tutorial on how to add it to the list of application options? 3) Is creating a diff and reapplying after every upgrade really the recommended method? Its to bad all the definitions are in a single file or else that might be a little easier to manage. 4) Any idea what type of logic i should be using to figuring out the proper numbers for the rrd graph settigns in this code section? rrdtool_create($rrd_filename, "--step 300 \ DS:pagesShared:GAUGE:600:0:125000000000 \ DS:pagesSharing:GAUGE:600:0:125000000000 \ DS:pagesUnshared:GAUGE:600:0:125000000000 ".$config['rrd_rra']); 5) What format should the agent script output be in? I am guessing it should be one per line? Right now my output is like so: <<md3000i>> total_io=3158.0 read_percentage=27.9 cache_hit_percentage=93.2 current_kbps=22475.2 current_iops=631.6 6) Last question: Is there any way to have certain agent scripts to be polled at slower intervals? This check takes about 5 seconds and is probably a resource hog on the management host since the script has to run a stupid java cli app. The management server in this case is the same host as the observium system, so I wouldnt have a problem not using the agent and just doing a cron if that was somehow an option. Thanks for you help. I know I had a lot of detailed questions. I sincerely appreciate the help. -Mark (MACScr)

1 0

unix-agent scripts conflicting with check_mk
by Mark Chaney 02 Oct '12

02 Oct '12

I cant seem to use any of the unix-agent scripts with check_mk as it ruins all the check_mk local script results. Basically any existing scripts start giving an error in the check_mk gui and state "Check output not found in local checks". If I reinventory the host, none of the scripts show up at all. As soon as i remove the observium local agent scripts from the check_mk local folder and I reinvetory the host, everything is fine again. I am unfortunately not sure what our options are though. The only thing I can think of is to somehow serialize the data so that it shows up on one line for each script, then is parsed back out by observium once it receives it. That way we easily ignore them within our main.mk files. Can't really do that now because of how there are so many lines for each result (apache/mysql for example). Thoughts? Im quite surprised this hasn't already been an issue. I am running check_mk 1.2.0p3 and observium 0.12.9.3385. - MACscr

1 0

Re: [Observium] Links not working
by Will McDermott 29 Sep '12

29 Sep '12

Awesome, that works. Thank you! Just for historical reasons: I changed Options Indexes FollowSymLinks MultiViews AllowOverride None Order allow,deny allow from all to Options Indexes FollowSymLinks MultiViews AllowOverride All Order allow,deny allow from all --Will >>> Tom Laermans 09/28/12 5:20 PM >>> Hi, You don't have allowoverride set up [as detailed in the install guide, but probably in a part that you didn't need due to no vhost], so .htaccess doesn't take effect, ergo no rewrite rules even though the module is loaded. Tom On 29/09/2012 1:29, Will McDermott wrote: > Thank you for your quick response! > > I double checked mod_rewrite and it looks like it's running: > > root@mon:/etc/apache2/mods-available# a2enmod rewrite > Module rewrite already enabled > > Also I have ovservium running in the root. I do not have a domain name associated with the server, Is that a problem? > > --Will > > >>>> Mark Chaney 09/28/12 4:16 PM >>> > You probably dont have mod_rewrite enabled. Also note that observium > has to run within the root directory of a domain or subdomain. > > On 2012-09-28 18:06, Will McDermott wrote: >> Hello, >> >> I just installed Observium from SVN on Ubuntu Ubuntu 10.04.4 LTS. I >> fallowed the Ubuntu installation guide. Observium comes up but when I >> log in. But when I click any of the links at the top they say "Not >> found" and give a invalid URL. For example when I click Devices> Add >> Devices it sends me to server.com/addhost/ which doesn't exist, >> because in the addhost directory is in a subdirectory called "pages." >> Did I miss something during the install? I have tried it a couple >> times, and reinstalled the server. >> >> Thanks! >> >> --Will >> >> _______________________________________________ >> observium mailing list >> observium(a)observium.org >> http://postman.memetic.org/cgi-bin/mailman/listinfo/observium > _______________________________________________ > observium mailing list > observium(a)observium.org > http://postman.memetic.org/cgi-bin/mailman/listinfo/observium > > _______________________________________________ > observium mailing list > observium(a)observium.org > http://postman.memetic.org/cgi-bin/mailman/listinfo/observium _______________________________________________ observium mailing list observium(a)observium.org http://postman.memetic.org/cgi-bin/mailman/listinfo/observium

1 0

Re: [Observium] Links not working
by Will McDermott 29 Sep '12

29 Sep '12

Thank you for your quick response! I double checked mod_rewrite and it looks like it's running: root@mon:/etc/apache2/mods-available# a2enmod rewrite Module rewrite already enabled Also I have ovservium running in the root. I do not have a domain name associated with the server, Is that a problem? --Will >>> Mark Chaney 09/28/12 4:16 PM >>> You probably dont have mod_rewrite enabled. Also note that observium has to run within the root directory of a domain or subdomain. On 2012-09-28 18:06, Will McDermott wrote: > Hello, > > I just installed Observium from SVN on Ubuntu Ubuntu 10.04.4 LTS. I > fallowed the Ubuntu installation guide. Observium comes up but when I > log in. But when I click any of the links at the top they say "Not > found" and give a invalid URL. For example when I click Devices> Add > Devices it sends me to server.com/addhost/ which doesn't exist, > because in the addhost directory is in a subdirectory called "pages." > Did I miss something during the install? I have tried it a couple > times, and reinstalled the server. > > Thanks! > > --Will > > _______________________________________________ > observium mailing list > observium(a)observium.org > http://postman.memetic.org/cgi-bin/mailman/listinfo/observium _______________________________________________ observium mailing list observium(a)observium.org http://postman.memetic.org/cgi-bin/mailman/listinfo/observium

2 1

Links not working
by Will McDermott 29 Sep '12

29 Sep '12

Hello, I just installed Observium from SVN on Ubuntu Ubuntu 10.04.4 LTS. I fallowed the Ubuntu installation guide. Observium comes up but when I log in. But when I click any of the links at the top they say "Not found" and give a invalid URL. For example when I click Devices> Add Devices it sends me to server.com/addhost/ which doesn't exist, because in the addhost directory is in a subdirectory called "pages." Did I miss something during the install? I have tried it a couple times, and reinstalled the server. Thanks! --Will

2 1

Re: [Observium] How to add linux server?
by Adam Armstrong 26 Sep '12

26 Sep '12

Documentation or features, its a simple choice. Andrey Lebedev <alg(a)condensa.ru> wrote: >On 2012-09-25 23:41:31 +0100, Tom Laermans said: > >> On 26/09/2012 0:38, Andrey Lebedev wrote: >>> >>> Tell us how you found it? >>> >>> http://www.observium.org/wiki/Documentation - nothing >>> http://www.observium.org/wiki/Main_Page - link to Professional Services >>> http://www.observium.org/wiki/Main_Page -> search -> word "Services" >>> -> appropriate page >>> >>> But. Thanks! >>> I'm find it. >> The last one, indeed. It's not linked anywhere because it's deprecated, >> unsupported and buggy. >> >> Tom >Annoying. But I think I can cope without this feature. >Once again I want to say - this is a good product, but it is not very >good documentation. >However - it's "as is". >Thank all for your help. And clarifications. > >Andrey > > >_______________________________________________ >observium mailing list >observium(a)observium.org >http://postman.memetic.org/cgi-bin/mailman/listinfo/observium

2 4

Re: [Observium] How to add linux server?
by Adam Armstrong 26 Sep '12

26 Sep '12

Services are deprecated. The code is still there because it would take time to remove. Do not use it. We have plans to implement better alerting in the future, but there is always a shortage of time. Adam. Andrey Lebedev <alg(a)condensa.ru> wrote: >On 2012-09-25 23:05:51 +0100, John Broome said: > >> I prefer my car, but that doesn't mean I'm going to use it to open a >> can of beans. I use the tool that's designed to do what I want, >> reliably. And if the creators of the software say it's not meant to >> be used for service monitoring I'm going to take their word for it. > >Hmm ... interesting that the author wanted to say a demo of their >product. Maybe this is a joke? >http://demo.observium.org/device/device=34/tab=services/ >http://demo.observium.org/device/device=7/tab=services/ >http://demo.observium.org/device/device=6/tab=services/ >http://demo.observium.org/ >kermit >Service Down >ssh > >It's no "service monitoring"? >Ok. :) > > > > >_______________________________________________ >observium mailing list >observium(a)observium.org >http://postman.memetic.org/cgi-bin/mailman/listinfo/observium

1 0

Re: [Observium] How to add linux server?
by Adam Armstrong 26 Sep '12

26 Sep '12

I think you misunderstand Occam's razor. We do not do up/down monitoring, no more than cacti or Mrtg do. Adam. Andrey Lebedev <alg(a)condensa.ru> wrote: >On 2012-09-25 21:45:12 +0100, Paul Cupis said: > >> "Observium is not intended to replace an up/down alerting system, but >> rather to complement it with an easy to manage, intuitive representation >> of historical and current performance statistics, configuration >> visualisation and syslog capture." > >Do not see any logic. >http://en.wikipedia.org/wiki/Occam's_razor >IMHO. > >But observium is preferd for me (over nagios or zabbix). > > >_______________________________________________ >observium mailing list >observium(a)observium.org >http://postman.memetic.org/cgi-bin/mailman/listinfo/observium

1 0

How to add linux server?
by Andrey Lebedev 26 Sep '12

26 Sep '12

Hi all, Sorry. 1) Offtopic. I unfortunately do not get your answers via mail. And look at them through http://postman.memetic.org/pipermail/observium/2012-September/thread.html How do I reply to this thread - but do not start a new topic every time? I have long lost touch (and forgotten) how to use mailing lists - last it was 10 years ago. 2) For monitoring unix servers use snmp? I do not understand a bit - but then why in wiki talk about the unix- agent. I saw that to unix-agent in any way no related to snmp. In my look this product have a lot of undocumented features that are unclear how they work. Regards, Andrey

4 13

How to add linux server?
by Andrey Lebedev 24 Sep '12

24 Sep '12

Hi all! Sorry for the newbie question. I just Installed Observium. Connected to many snmpv3 network devices - Cisco, Extreme, Juniper ... I'm fine. I'm happy with everything. Now I want to connect my first Linux server. But I find no documentation - how? I installed check_mk_agent on linux. root@monitoring:/opt/observium# telnet x.x.x.60 6556 | head Trying x.x.x.60... Connected to x.x.x.60. Escape character is '^]'. <<<check_mk>>> Version: 1.2.0p2 AgentOS: linux PluginsDirectory: /usr/lib/check_mk_agent/plugins LocalDirectory: /usr/lib/check_mk_agent/local AgentDirectory: /etc/check_mk OnlyFrom: 127.0.0.1 x.x.x.61 I do not know what to do next? Thank you for your help. Regards, Andrey

3 2

How to add linux server?
by Andrey Lebedev 24 Sep '12

24 Sep '12

+screenshot Only snmp devices: http://s11.postimage.org/6izs930cj/Picture_478.png

1 0

How to add linux server?
by Andrey Lebedev 24 Sep '12

24 Sep '12

Hello Paul , Thanks for the help, but I do not understand what you are saying (about web-interface). I do not have anything on the screen. I send the link to screenshot. http://s12.postimage.org/oddm5vdbx/Picture_477.png root@monitoring:/opt/observium# cat config.php | tail -f $config['poller_modules']['unix-agent'] = 1; ?> root@monitoring:/opt/observium# /etc/init.d/apache2 restart * Restarting web server apache2 ... waiting ...done.

1 0

Re: [Observium] SSD for better performance
by Adam Armstrong 19 Sep '12

19 Sep '12

The maths and specs suggest a modern SSD should survive observium workload for quite a while, but I'm still worried about the random failure rate and the likelyhood that individual cells get worn out. In general SSDs are such a strange tech, there's almost no way to really improve them except with fancy controller hacks, the flash itself is a dead end tech. Good luck :-) Adam Cushard Michael <mcc(a)us.axway.com> wrote: >_______________________________________________ >observium mailing list >observium(a)observium.org >http://postman.memetic.org/cgi-bin/mailman/listinfo/observium

3 2

Re: [Observium] SSD for better performance
by Adam Armstrong 19 Sep '12

19 Sep '12

I would recommend dumping the data to a real disk occasionally, as observium/rrd-style workloads are pretty hard on flash-based storage. I have SSDs in my workstations, but I'm not sure if I'd trust them in a server quite yet. Please report back if/when it breaks :-) Adam. Cushard Michael <mcc(a)us.axway.com> wrote: >_______________________________________________ >observium mailing list >observium(a)observium.org >http://postman.memetic.org/cgi-bin/mailman/listinfo/observium

3 2

Re: [Observium] port ignore partly fails on large number of ports
by Adam Armstrong 19 Sep '12

19 Sep '12

Haha. Glad it works :-) We should add that to the docs somewhere! Adam. Maarten De Wispelaere <maarten.dewispelaere(a)intec.ugent.be> wrote: >_______________________________________________ >observium mailing list >observium(a)observium.org >http://postman.memetic.org/cgi-bin/mailman/listinfo/observium

3 3

port ignore partly fails on large number of ports
by Maarten De Wispelaere 19 Sep '12

19 Sep '12

Hi, I recently discovered the following : When trying to set "Ignore" status on switches with large number of ports (eg. force10 e1200 or c300 chassis), the setting doesn't get saved for some of the ports. More specific, at the end of the list. This is what I did : Toggle all -> removed the toggle from the mgmt interface -> then save What happens: Most ports get "ignored" status, part of them don't After getting the status, they again have a 'not-ignored-status' (checkbox not checked). If I check them again & press save -> same issue. Seems like the checkboxes only get processed to a certain number of items ? Does this sound familiar ? Thanks in advance, Maarten De Wispelaere Department of Information Technology Internet Based Communication Networks and Services (IBCN) Ghent University - IBBT Gaston Crommenlaan 8 Bus 201, B-9050 Gent, Belgium E-mail: maarten.dewispelaere(a)intec.UGent.be Tel. +32 (0)9 33 14979 Fax +32 (0)9 33 14899

5 5

Accurate Graphs in Billing are probably not so accurate
by Matthias Cramer 19 Sep '12

19 Sep '12

Hi I've noticed two things in the "Accurate" graphs in the Billing part: 1. Are Interface counter overflows or equipment reboot) probably not catched? - I see very high spikes (200 Gbps and more) on a 1G interface sometimes in sometimes out, but not at the same time. the quick graphs are ok 2. If I monitore more tha one interface for billing (Unfotunately one of the is down) the accurate graps are at leaset 1000 times to high... Atached some graphs... I runn lates svn (0.12.9.3378). Any ideas ? Regards Matthias -- Matthias Cramer / mc322-ripe Senior Network & Security Engineer iway AG Phone +41 43 500 1111 Badenerstrasse 569 Fax +41 44 271 3535 CH-8048 Zürich http://www.iway.ch/ GnuPG 1024D/2D208250 = DBC6 65B6 7083 1029 781E 3959 B62F DF1C 2D20 8250

2 1

Eaton Powerware UPS
by Aaron Maurer 17 Sep '12

17 Sep '12

Hi all, First time poster here. We use observium here at our office and think it is a great program. We were interested in having observium read SNMP information from our Powerware 9130 UPS's. Currently observium can't identify them. We were wondering if there was any interest in the community to write a snmp module to read from the Powerwares. The documentation for the SNMP values is posted in the PDF files which I can provide. If there is positive interest for anyone on helping take this on I can also provide SNMP walks of my Eatons. Here is a snippet of the first few lines of SNMP information: SNMPv2-MIB::sysDescr.0 = STRING: Powerware 9130 3000 SNMPv2-MIB::sysObjectID.0 = OID: SNMPv2-SMI::enterprises.705.1 DISMAN-EVENT-MIB::sysUpTimeInstance = Timeticks: (2144221738) 248 days, 4:10:17.38 Thank you, Aaron Maurer Diversified Business Systems Inc. Office: 440-942-6961 Fax: 440-942-5819 amaurer(a)dbsinet.com http://www.dbsinet.com

1 0

Re: [Observium] Checkpoint Firewall Support?
by Steve Costaras 04 Sep '12

04 Sep '12

Doing some more digging here, it appears UCD-SNMP-MIB values for ssCpuUser (system & idle) are being populated correctly from checkpoint utm/splat deployments. But other items like interrupts, etc are working. The cpu values appear to be stored in the checkpoint enterprise mib: -- CHECKPOINT-MIB::multiProcIndex.1.0 = INTEGER: 1 CHECKPOINT-MIB::multiProcIndex.2.0 = INTEGER: 2 CHECKPOINT-MIB::multiProcUserTime.1.0 = INTEGER: 0 CHECKPOINT-MIB::multiProcUserTime.2.0 = INTEGER: 1 CHECKPOINT-MIB::multiProcSystemTime.1.0 = INTEGER: 100 CHECKPOINT-MIB::multiProcSystemTime.2.0 = INTEGER: 2 CHECKPOINT-MIB::multiProcIdleTime.1.0 = INTEGER: 0 CHECKPOINT-MIB::multiProcIdleTime.2.0 = INTEGER: 97 CHECKPOINT-MIB::multiProcUsage.1.0 = INTEGER: 100 CHECKPOINT-MIB::multiProcUsage.2.0 = INTEGER: 3 -- Found the current version of the mib as well as a checkpoint 32x32 graphic that can be added to the project (attached) in case someone has more time to play with it than I do. I'm still trying to wrap my head around the coding here to update this for first, base OS (per-cpu) utilization, then expand on it to something similar to the ASA firewall tab. Also it appears that the vendor has an issue with the netsnmp package supplied with the default media 5.0.9) but they do have an update package (5.3.1). This at least provides for cpu enumeration but still no stats (per above).

2 1

Re: [Observium] Strange graph
by Adam Armstrong 04 Sep '12

04 Sep '12

This is probably because the device frequently returns invalid data. A common problem with tacked systems like the 3750 and VSS. Adam. Nicolas COULIN <nicolas.coulin(a)kleegroup.com> wrote: >_______________________________________________ >observium mailing list >observium(a)observium.org >http://postman.memetic.org/cgi-bin/mailman/listinfo/observium

2 1

Strange graph
by Nicolas COULIN 04 Sep '12

04 Sep '12

Hi, Graphs for my stack was not correct. I have 4 swtich in stack. And observium return values very strange. 500Go by interface.... :/ Cisco IOS Software, C3750 Software (C3750-IPBASEK9-M), Version 15.0(2)SE, I have the last svn update on centos 6.2 I test to delete the host, delete rrd directory, and add my host. But the problem come back. I don't understand why. Thanks [Logo Kleegroup] Klee Group is a great place to work - Il fait bon travailler ? Klee Group

1 0

No more graphs after upgrade
by Max Leon 03 Sep '12

03 Sep '12

Hello, I have a problem I had revision 3049, due to a small problem displaying the heath status of the drives I updated to HEAD and immediatly run ./discovery.php -h new. All functionality seems to be there but I have no new graphs, any ideas on how to troubleshoot/fix this problem? Thank you. Max Leon

2 2

Re: [Observium] [Patch] Collectd v5 Apache fix
by Adam Armstrong 03 Sep '12

03 Sep '12

Please to be not distributing broken patches. Adam. Chris Bennett <chris(a)ceegeebee.com> wrote: >Hi Tom, > >> I presume this breaks users who still use collectd <5? > >Yep, treat the email & bug submission as a report of the problem and >ignore the patch, to fix this properly. I'm just putting it out into >the public so others might find this when they are troubleshooting the >same problem :) > >Regards, > >Chris >_______________________________________________ >observium mailing list >observium(a)observium.org >http://postman.memetic.org/cgi-bin/mailman/listinfo/observium

2 1

[Patch] Collectd v5 Apache fix
by Chris Bennett 03 Sep '12

03 Sep '12

Hi there, I noticed collectd graphing of Apache graphs is broken after Collectd released version 5 of their software. The data source name has changed from 'value' to 'count'. See attached patch. I've also filed a bug report with the patch: http://jira.observium.org/browse/OBSERVIUM-122 Regards, Chris

2 2

Observirum Graphs ere empty
by Nicolas COULIN 27 Aug '12

27 Aug '12

Hi, I have install Observium since few days, and all my graphs are empty. Rrd files are present on folder. I don't understand why. I use centos 6.2. Thanks. [Logo Kleegroup] Klee Group is a great place to work - Il fait bon travailler ? Klee Group

5 7

Re: [Observium] Observirum Graphs ere empty
by Adam Armstrong 27 Aug '12

27 Aug '12

Tom Laermans <tom.laermans(a)powersource.cx> wrote: >Hi, > >You probably didn't do it right. > >Unfortunately, "my graphs are empty" doesn't gives us a lot of >information. > >Tom > >On Mon, 2012-08-27 at 09:57 +0000, Nicolas COULIN wrote: >> Hi, >> >> >> >> I have install Observium since few days, and all my graphs are empty. >> >> >> >> Rrd files are present on folder. >> >> >> >> I don’t understand why. >> >> I use centos 6.2. >> >> >> >> Thanks. >> >> >> >> Logo Kleegroup >> Klee Group is a great place to work – Il fait bon travailler à Klee >> Group >> _______________________________________________ >> observium mailing list >> observium(a)observium.org >> http://postman.memetic.org/cgi-bin/mailman/listinfo/observium > > > >_______________________________________________ >observium mailing list >observium(a)observium.org >http://postman.memetic.org/cgi-bin/mailman/listinfo/observium

1 0

openBSD
by Miguel Alejandro González 26 Aug '12

26 Aug '12

Hello Can I monitor a machine with OpenBSD with Observium??? Regards!

2 1

Help with vmware
by Pavel Ondřej 22 Aug '12

22 Aug '12

Hello, Can you help me please? How can I connect observium to ESXI5 Thank you for greet program. Pavel

1 0

Re: [Observium] Checkpoint Firewall Support?
by Steve Costaras 16 Aug '12

16 Aug '12

I do have some older nokia systems (IP380's, IP530's, and I think an IP740) laying around somewhere, but most of the new systems are using Secure Platform (R65, R70, R71, R75) versions and/or UTM's (basically the same thing, they all RedHat Enterprise v5.4 9(2.6.18 kernel) slimmed down with an extra checkpoint mib tree for items outside the base OS). We also have some provider-1 deployments (management station) but that I would consider future if anything. If you know enough about handling the observium code itself I can try helping on the checkpoint side. I have some systems here to test against as well. Steve >-----Original Message----- >From: Rob J. Epping [mailto:rob.epping@gmail.com] >Sent: Thursday, August 16, 2012 04:17 AM >To: stevecs(a)chaven.com, 'Observium Network Observation System' >Subject: Re: [Observium] Checkpoint Firewall Support? > >Hi, > >On Mon, Aug 13, 2012 at 11:14 PM, Steve Costaras <stevecs(a)chaven.com> wrote: >> >> I'm just starting to look at observium for some monitoring. I see that it supports cisco based firewalls (ASA/PIX) but it does not currently support checkpoint. >> >> Checkpoint mainly runs on top of redhat linux. I'm able to get the general linux stats but not the firewall specific stats (connections/vpn/etc) similar to what's available with the cisco asa support. >> >> Basically, I'm asking if anyone has managed to get this to work. Or barring that, any information as to how to add support? > >I have some patches to submit. But these are for Nokia IP-platform with IPSO. > >Anything particular that interests you? >-- >GRTNX, >RobJE >

1 0

solaris 10 / net-snmp not getting cpu stats
by Steve Costaras 16 Aug '12

16 Aug '12

Still testing with various devices here, found an interesting issue. I have a M3000 sun box with solaris 10 on it, which gets added fine and most of the graphs appear to be eyeball correct, however am NOT stats for cpu utilization. The sun box is using net-snmp (included w/ solaris 10)(not the older sun snmpd daemon) which was the default with older systems. doing a manual walk I DO get stats: $ snmpwalk -v2c -c XXXX XXXXX 1.3.6.1.4.1.2021.11 iso.3.6.1.4.1.2021.11.1.0 = INTEGER: 1 iso.3.6.1.4.1.2021.11.2.0 = STRING: "systemStats" iso.3.6.1.4.1.2021.11.3.0 = INTEGER: 0 iso.3.6.1.4.1.2021.11.4.0 = INTEGER: 0 iso.3.6.1.4.1.2021.11.5.0 = INTEGER: 0 iso.3.6.1.4.1.2021.11.6.0 = INTEGER: 0 iso.3.6.1.4.1.2021.11.7.0 = INTEGER: 507 iso.3.6.1.4.1.2021.11.8.0 = INTEGER: 259 iso.3.6.1.4.1.2021.11.9.0 = INTEGER: 1 iso.3.6.1.4.1.2021.11.10.0 = INTEGER: 0 iso.3.6.1.4.1.2021.11.11.0 = INTEGER: 99 iso.3.6.1.4.1.2021.11.50.0 = Counter32: 1190528 iso.3.6.1.4.1.2021.11.52.0 = Counter32: 330481 iso.3.6.1.4.1.2021.11.53.0 = Counter32: 136097671 iso.3.6.1.4.1.2021.11.54.0 = Counter32: 0 iso.3.6.1.4.1.2021.11.55.0 = Counter32: 330481 iso.3.6.1.4.1.2021.11.57.0 = Counter32: 0 iso.3.6.1.4.1.2021.11.58.0 = Counter32: 0 iso.3.6.1.4.1.2021.11.59.0 = Counter32: 898868894 iso.3.6.1.4.1.2021.11.60.0 = Counter32: 736460424 so it is showing ticks. but I don't see that mib tree being referenced by doing a poller debug at all? is the solaris support only for perhaps the old snmp (solaris) version which has the entries in a different tree?

1 0

Re: [Observium] Switchmap integration
by Adam Armstrong 15 Aug '12

15 Aug '12

:-D Nikolay Shopik <shopik(a)inblock.ru> wrote: >Adam, just use two words - world domination > >On 15.08.2012 21:37, Adam Armstrong wrote: >> Almost everything that switchmap and netdisco does is on our long-term >> wish list, it's just a matter of finding time and resources to develop >> it all. >> >> We also would prefer to use our own code to generate the configs and >> "smokeping" stats too, as integration is a little one way and suboptimal >> to configure. >> >> adam. >> >> >> On 15/08/2012 17:59, Cushard Michael wrote: >>> Hi, >>> >>> Netdisco does have move features and is an all-around more complete >>> solution, but for me personally it was overkill. Switchmap is just a >>> few simple scripts you schedule and it pulls all the data into csv >>> files, then creates simple html files based on the csv data and has a >>> script for seaching through all the generated pages. It's pretty fast >>> as well. I can do roughly 10000 ports in under 30 minutes with it over >>> some pretty terrible WAN links. I currently have a Switchmap link in >>> our Observium installation as a custom menu item, but tighter >>> integration (of something) would obviously be better. >>> >>> Regards, >>> >>> Michael >>> -----Original Message----- >>> From: observium-bounces(a)observium.org >>> [mailto:observium-bounces@observium.org] On Behalf Of Michael Robbert >>> Sent: Wednesday, August 15, 2012 8:35 AM >>> To: observium(a)observium.org >>> Subject: Re: [Observium] Switchmap integration >>> >> Michael, >> How does Switchmap compare to Netdisco and/or SNMPInfo (The set of >> libraries that Netdisco uses)? Netdisco stores its data in a database >> that could be queried. We use Netdisco and I might be convinced to >> take a look at this kind of integration. I am not a core developer for >> either project so I can't say anything about its acceptance in the >> code base. I do think that it would have to be a plug-in of some type >> not a core feature. Both Swiitchmap and Netdisco are mostly Perl while >> Observium is mostly PHP. I see them as being separate projects, but >> Observium could have a configuration telling it to look at another >> database for more info to display. >> As a side note I'm surprised that I've never heard of Switchmap >> before. We work often with the Network engineers at NCAR/UCAR that >> wrote it. They manage the consortium that is our connection to the >> internet. >> >> Mike Robbert >> >> >> On 8/14/12 9:39 PM, Cushard Michael wrote: >>>>> Hi, >>>>> >>>>> Switchmap (http://sourceforge.net/projects/switchmap) is a most >>>>> excellent little utility written in perl. It goes out to all your >>>>> configured switches utilizing SNMP and pulls all the ARP and MAC >>>>> tables from them, and builds static HTML pages for each switch with >>>>> tables that list port number, speed, duplex, CDP neighbor >>>>> information, MAC address(es), IP address(es), and the fqdn(s) of >>>>> the device(s) seen on the ports at the time of polling. It also >>>>> provides a rudimentary search function that lets you search through >>>>> all the hosts to find which switch port across all your switches a >>>>> particular host was last seen on. This is very handy when you have >>>>> a large number of switches and ports and you need to go "hunting". >>>>> >>>>> >>>>> Now I may be having a UTS moment here, and if I am please correct >>>>> me, but while Observium seems to have something similar, it doesn't >>>>> appear to go to the depth that Switchmap does to actually tell you >>>>> what host(s) are actually connected to what switch ports by >>>>> utilizing the switches ARP and MAC tables. >>>>> >>>>> What would make Observium - and Switchmap - even better would be if >>>>> there was integration between the two, similar to the SmokePing or >>>>> RANCID integration. Switchmap stores all its polled data for each >>>>> switch in separate CSV files, there doesn't seem to be anything >>>>> mysterious going on as far as data storage is concerned. What would >>>>> it take to make a "Switchmap" tab in Observium under a device that >>>>> lists this data, similar to the way RANCID has a "config" tab and >>>>> SmokePing has a "Ping" tab that is integrated into Observium? >>>>> >>>>> Regards, >>>>> >>>>> Michael >>>>> >>>>> _______________________________________________ observium mailing >>>>> list observium(a)observium.org >>>>> http://postman.memetic.org/cgi-bin/mailman/listinfo/observium >>>>> >>> _______________________________________________ >>> observium mailing list >>> observium(a)observium.org >>> http://postman.memetic.org/cgi-bin/mailman/listinfo/observium >>> _______________________________________________ >>> observium mailing list >>> observium(a)observium.org >>> http://postman.memetic.org/cgi-bin/mailman/listinfo/observium >> >> _______________________________________________ >> observium mailing list >> observium(a)observium.org >> http://postman.memetic.org/cgi-bin/mailman/listinfo/observium >_______________________________________________ >observium mailing list >observium(a)observium.org >http://postman.memetic.org/cgi-bin/mailman/listinfo/observium

1 0

Re: [Observium] Missing TenGigabit interfaces on Cisco WC-C4900M
by Adam Armstrong 14 Aug '12

14 Aug '12

Interfaces are polled via IF-MIB. Almost every device is identical for that. Either you switch is not exposing these interfaces in snmp or they are being filtered. Try running discovery in debug for that host. Adam. Per Jorgensen <pej(a)combox.dk> wrote: >Hi all > >First of all thank to the team of developer for making this program, and making it better and better everyday, >love the look and ease of use. > >But I have run into a problem with a Tengigabit ethernet device I newly added into my Observium v. 0.12.8.3360. >it seems that every thing get detected alright, except all the TenGigabitEthernet, interfaces dont show up >anywhere in Observium, all other interfaces on that device gets detectet allright, and I can see the >interfaces in the ports tab on the device, but not the TenGengigabit interfaces. btw: the device is a >Cisco WS-C4900M > >Is that because Cisco WS-C4900M is not a supported device , or should I do some config changes to get >TenGigabitEthernet to work ? > >if the WC-C4900M is not supported, how can I then contribute with information on the device , and help to >then this device supported ? > >Best Regards >Per Jorgensen >_______________________________________________ >observium mailing list >observium(a)observium.org >http://postman.memetic.org/cgi-bin/mailman/listinfo/observium

2 1

Re: [Observium] Graphs only work when debuging
by Tom Laermans 14 Aug '12

14 Aug '12

See faq entry about whitespace in your config file. Sent from my mobile, please excuse brevity and spelling errors. ----- Reply message ----- From: "Brian Morgan" <bluedogs(a)gmail.com> To: "Observium Network Observation System" <observium(a)observium.org> Subject: [Observium] Graphs only work when debuging Date: Tue, Aug 14, 2012 14:34 Hello, On a fresh install of observium on ubuntu 12.04 (LAMP) we are having issues with the graphs not showing up. The graphs display as a broken image icon. If you access the image url directly that is loading /graph.php?.... you still get a broken image. But when you try to debug the issue, (we append &debug=1 to the url) the image displays correctly. Turning on debuging on the parent page yields no useful data, and the graphs are still broken images, but we assume that is because the debug variable isn't passed down to the image url. The graphs are getting generated in the /tmp directory and have valid data. I am at a loss of where to look to figure out what we either forgot to do or have misconfigured. Subversion shows that we are upto date at version 3360 Thank you, Brian _______________________________________________ observium mailing list observium(a)observium.org http://postman.memetic.org/cgi-bin/mailman/listinfo/observium

2 1

Re: [Observium] Graphs only work when debuging
by Adam Armstrong 14 Aug '12

14 Aug '12

Reinstall and follow the guide properly. Adam. Brian Morgan <bluedogs(a)gmail.com> wrote: >Hello, >On a fresh install of observium on ubuntu 12.04 (LAMP) we are having >issues with the graphs not showing up. >The graphs display as a broken image icon. > >If you access the image url directly that is loading /graph.php?.... >you still get a broken image. >But when you try to debug the issue, (we append &debug=1 to the url) >the image displays correctly. >Turning on debuging on the parent page yields no useful data, and the >graphs are still broken images, >but we assume that is because the debug variable isn't passed down to >the image url. > >The graphs are getting generated in the /tmp directory and have valid data. > >I am at a loss of where to look to figure out what we either forgot to >do or have misconfigured. > >Subversion shows that we are upto date at version 3360 > >Thank you, >Brian >_______________________________________________ >observium mailing list >observium(a)observium.org >http://postman.memetic.org/cgi-bin/mailman/listinfo/observium

1 0

Graphs only work when debuging
by Brian Morgan 14 Aug '12

14 Aug '12

Hello, On a fresh install of observium on ubuntu 12.04 (LAMP) we are having issues with the graphs not showing up. The graphs display as a broken image icon. If you access the image url directly that is loading /graph.php?.... you still get a broken image. But when you try to debug the issue, (we append &debug=1 to the url) the image displays correctly. Turning on debuging on the parent page yields no useful data, and the graphs are still broken images, but we assume that is because the debug variable isn't passed down to the image url. The graphs are getting generated in the /tmp directory and have valid data. I am at a loss of where to look to figure out what we either forgot to do or have misconfigured. Subversion shows that we are upto date at version 3360 Thank you, Brian

1 0

Re: [Observium] Checkpoint Firewall Support?
by Adam Armstrong 14 Aug '12

14 Aug '12

The code is the documentation, mostly. Adam. Steve Costaras <stevecs(a)chaven.com> wrote: > >I'm just starting to look at observium for some monitoring. I see that it supports cisco based firewalls (ASA/PIX) but it does not currently support checkpoint. > >Checkpoint mainly runs on top of redhat linux. I'm able to get the general linux stats but not the firewall specific stats (connections/vpn/etc) similar to what's available with the cisco asa support. > >Basically, I'm asking if anyone has managed to get this to work. Or barring that, any information as to how to add support? > > >Steve > > > >_______________________________________________ >observium mailing list >observium(a)observium.org >http://postman.memetic.org/cgi-bin/mailman/listinfo/observium

1 0

Post saturation warnings / alerts disabled ?
by Maarten De Wispelaere 11 Aug '12

11 Aug '12

Dear all, For some reason, I'm getting Port saturation threshold warnings for ports on a switch where I have disabled 'alerting' for that specific port. Is that normal ? Or some kind of bug ? I'm new to Observium, so I can't compare to previous versions. Thanks in advance, Maarten De Wispelaere IBCN - Ghent University

2 2

Re: [Observium] Observium Not logged in!
by BREUVART Jean-Jacques 08 Aug '12

08 Aug '12

I’ve try with Opera, Firefox and IE and having the same problem. Cordialement, greatings. Jean-Jacques Breuvart (75.42.39) P Please consider the environmental impact of needlessly printing this e-mail. De : observium-bounces(a)observium.org [mailto:observium-bounces@observium.org] De la part de Dan Draghici Envoyé : mardi 7 août 2012 13:17 À : 'Observium Network Observation System' Objet : Re: [Observium] Observium Not logged in! Try a different browser ? I too, noticed some display problems on IE. Dan From: observium-bounces(a)observium.org<mailto:observium-bounces@observium.org> [mailto:observium-bounces@observium.org] On Behalf Of BREUVART Jean-Jacques Sent: Tuesday, August 07, 2012 2:09 PM To: observium(a)observium.org<mailto:observium@observium.org> Subject: [Observium] Observium Not logged in! I’ve installed a new server under Ubuntu server like describe in the documentation. I’ve create a user (adduser) I’ve create a host (addhost), running discovery and poller without error. But, when I try to connect I’ve no login page, only the logo Observium and in the top right “ Widescreen | Not logged in!” Any idea ? Jean-Jacques Breuvart Ce message provient d’un cabinet d’avocats et contient des informations confidentielles protégées par le secret professionnel. Au cas où il ne vous serait pas destiné, nous vous remercions de bien vouloir nous en aviser immédiatement et de le supprimer. Gide Loyrette Nouel ne peut être tenu responsable en cas de modification d’un message électronique ou d’une pièce jointe sans son accord écrit. Gide Loyrette Nouel A.A.R.P.I. fait partie de Gide Loyrette Nouel, un cabinet d’avocats international ayant ses bureaux à Alger, Bruxelles, Bucarest, Budapest, Casablanca, Hanoi, Hô Chi Minh Ville, Hong Kong, Istanbul, Kiev, Londres, Moscou, New York, Paris, Pékin, Saint-Pétersbourg, Shanghai, Tunis et Varsovie. Une liste des associés de chaque bureau vous sera fournie sur demande. This e-mail is sent by a law firm and may contain information that is privileged or confidential. If you are not the intended recipient, please delete this e-mail and any attachments and notify us immediately. Gide Loyrette Nouel is not liable if an e-mail or attachment is altered without its written consent. Gide Loyrette Nouel A.A.R.P.I. is part of Gide Loyrette Nouel, an international law firm, with offices in Algiers, Beijing, Brussels, Bucharest, Budapest, Casablanca, Hanoi, Ho Chi Minh City, Hong Kong, Istanbul, Kyiv, London, Moscow, New York, Paris, Saint Petersburg, Shanghai, Tunis and Warsaw. A list of partners at each office can be provided upon request. Ce message provient d’un cabinet d’avocats et contient des informations confidentielles protégées par le secret professionnel. Au cas où il ne vous serait pas destiné, nous vous remercions de bien vouloir nous en aviser immédiatement et de le supprimer. Gide Loyrette Nouel ne peut être tenu responsable en cas de modification d’un message électronique ou d’une pièce jointe sans son accord écrit. Gide Loyrette Nouel A.A.R.P.I. fait partie de Gide Loyrette Nouel, un cabinet d’avocats international ayant ses bureaux à Alger, Bruxelles, Bucarest, Budapest, Casablanca, Hanoi, Hô Chi Minh Ville, Hong Kong, Istanbul, Kiev, Londres, Moscou, New York, Paris, Pékin, Saint-Pétersbourg, Shanghai, Tunis et Varsovie. Une liste des associés de chaque bureau vous sera fournie sur demande. This e-mail is sent by a law firm and may contain information that is privileged or confidential. If you are not the intended recipient, please delete this e-mail and any attachments and notify us immediately. Gide Loyrette Nouel is not liable if an e-mail or attachment is altered without its written consent. Gide Loyrette Nouel A.A.R.P.I. is part of Gide Loyrette Nouel, an international law firm, with offices in Algiers, Beijing, Brussels, Bucharest, Budapest, Casablanca, Hanoi, Ho Chi Minh City, Hong Kong, Istanbul, Kyiv, London, Moscow, New York, Paris, Saint Petersburg, Shanghai, Tunis and Warsaw. A list of partners at each office can be provided upon request.

3 4