- observium - lists.observium.org

Graphs on main page
by Chris Stone 07 May '12

07 May '12

I see the demo has some graphs on the overall system overview page. Looked around and don't see how to specify graphs to be shown there. How is this accomplished? Thanks. Chris -- Chris Stone AxisInternet, Inc. www.axint.net

3 6

BRIDGE-MIB keep track of mac
by Nikolay Shopik 06 May '12

06 May '12

Does observium using BRIDGE-MIB to keep track mac addresses? I see it included in mib dir, but I unable to find any way to see mac addresses on switches. Basically I'm talking about this functionality http://www.cisco.com/en/US/tech/tk648/tk362/technologies_tech_note09186a008…

2 1

join mailing list
by eric machine 04 May '12

04 May '12

like to join mailing list

2 2

NLNOG Ring
by Adam Armstrong 01 May '12

01 May '12

Hi All, I'd like to direct your attention to another project run by some friends of mine: the NLNOG RING. The project is based around the goals of making network debugging much easier. When trying to debug complex problems and plan future upgrades, a point of view from outside your network is absolutely essential. Seeing what others see is incredibly useful when dealing with a variety of network problems. Well known examples are 'it works for even numbered ip address, but not for odd numbered ip address via this and this route'. To streamline such debugging the NLNOG RING was formed. In essence the project is very simple: you make a (virtual) machine available to the RING, and you gain access on all other servers which are part of the RING. The project currently has 98 nodes, located on 89 participant networks in 24 countries. The RING provides tools to trivially launch a ping from all these nodes and summarize the results to, other examples are distributed tracerouting and MTU testing. The RING also maintains a record of latencies between nodes using smokeping to help identify historic problems. Before applying to join, keep the following requirements in mind: * The organisation you work for has BGP routers connected to the "Default Free Zone". * Your organisation has its own ASN, IPv4 and IPv6 prefix(es). * You have enable or configure rights on those routers. * You have permission from your organisation to become involved in the NLNOG RING. Have a look at https://ring.nlnog.net/for more information. You can also email ring-admins(a)ring.nlnog.net with any questions you have. adam.

1 0

Subdirectory
by churnd dnruhc 01 May '12

01 May '12

Is it possible to use observium on a webserver as a subdirectory, i.e. https://server/observium? I'm a small shop that's part of a bigger organization & I don't have access to DNS to create a subdomain. Apologies if this has been answered already. I did a quick search & saw a similar question asked, but the thread didn't seem to contain an answer I could see. TIA

7 8

Re: [Observium] Ironware CPU Patch
by Adam Armstrong 30 Apr '12

30 Apr '12

The old one is also hundredths. The only kid which gives while units is one of the new ones. Adam. -- Sent from my Android phone with K-9 Mail. Please excuse my brevity. Matthias Cramer <matthias.cramer(a)iway.ch> wrote: Hi Adam On 30/04/12 15:29, Adam Armstrong wrote: > The newer OIDs come from a newer version of the MIB. > > Incidentally, 1300 / 100 is 13. If it was displaying 0.13, then there is some maths failure within the polling code (or discovery is storing the wrong settings in the database). True, I noticed that. Observium seams to do everything right for this OID, but it is not getting this oid, it is getting the "old" one. And there I get real percents back. Attached is a Screenshot of that MIB part. The real question is in my opinion, how to get the new OID to work. The Processor discovery as it is now can in my opinion only detect the old one. Regards Matthias -- Matthias Cramer / mc322-ripe Senior Network & Security Engineer iway AG Phone +41 43 500 1111 Badenerstrasse 569 Fax +41 44 271 3535 CH-8048 Zürich http://www.iway.ch/ GnuPG 1024D/2D208250 = DBC6 65B6 7083 1029 781E 3959 B62F DF1C 2D20 8250 _____________________________________________ observium mailing list observium(a)observium.org http://postman.memetic.org/cgi-bin/mailman/listinfo/observium

2 2

Ironware CPU Patch
by Matthias Cramer 30 Apr '12

30 Apr '12

Hi The scale of the discovered CPU's on Ironware based geer is off by factor 100. This patch will fix that. Tested on Brocade XMR4000 Regards Matthias Index: includes/discovery/processors/ironware.inc.php =================================================================== --- includes/discovery/processors/ironware.inc.php (revision 3098) +++ includes/discovery/processors/ironware.inc.php (working copy) @@ -15,11 +15,11 @@ { $usage_oid = ".1.3.6.1.4.1.1991.1.1.2.11.1.1.6." . $index; $usage = $entry['snAgentCpuUtil100thPercent']; - $precision = 100; + $precision = 1; } elseif ($entry['snAgentCpuUtilValue']) { $usage_oid = ".1.3.6.1.4.1.1991.1.1.2.11.1.1.4." . $index; $usage = $entry['snAgentCpuUtilValue']; - $precision = 100; + $precision = 1; } list($slot, $instance, $interval) = explode(".", $index); -- Matthias Cramer / mc322-ripe Senior Network & Security Engineer iway AG Phone +41 43 500 1111 Badenerstrasse 569 Fax +41 44 271 3535 CH-8048 Zürich http://www.iway.ch/ GnuPG 1024D/2D208250 = DBC6 65B6 7083 1029 781E 3959 B62F DF1C 2D20 8250

3 5

Web links
by Mark Murphy 28 Apr '12

28 Apr '12

I have installed the software and I get the login page bur every link I click on after that gives a 404 error. This is a Ubuntu server and the default web is only the monitoring software. I made the updates according to the install instructions.

2 1

No VLANs tab / Cisco 2960S / 0.12.4.3087
by Adam Armstrong 27 Apr '12

27 Apr '12

Aha. This is because we check for 1,2 and two, three for vtp version. This will be fixed later today, i'm just rewriting the discovery module to be more sane. adam. On 2012-04-27 07:15, Damien BASTIE wrote: > One result : > > SNMPv2-SMI::enterprises.9.9.46.1.1.1.0 = INTEGER: 3 > > ________________________________________ > De : Adam Armstrong [adama(a)memetic.org] > Date d'envoi : vendredi 27 avril 2012 00:25 > À : Damien BASTIE > Objet : Re: RE : [Observium] No VLANs tab / Cisco 2960S / 0.12.4.3087 > > and : > > > > .1.3.6.1.4.1.9.9.46.1.1.1.0 > > > > adam. >

1 0

No VLANs tab / Cisco 2960S / 0.12.4.3087
by Damien BASTIE 27 Apr '12

27 Apr '12

Hi, I am testing Observium for the first time I have no VLANs tab for a stack Cisco 2960S, it is normal ? Cisco 2960 S / cat29xxStack / C2960S-UNIVERSALK9-M / Cisco IOS 12.2(55)SE2 (UNIVERSALK9) If i can send any debug no problem ! Regards, Damien

5 10

data missing on BGP IPv4 prefixes graphs
by Dario Calamai 23 Apr '12

23 Apr '12

Hello! there are an "Error Drawing Graph" on BGP IPv4 Prefixes page graphs. (/routing/protocol=bgp/type=all/graph=prefixes_ipv4unicast/view=graphs/) I don't know if this error appears in last update... little question about mail notification: do you have disabled the notification of DOWN of a BGP Peer? it works when peering is going UP or FLAP only! many thanks! dario -- http://www.playnet.it phone +39 055 3226622 - fax +39 055 3226444 Brain Technology s.p.a. - AS 13284 http://www.linkedin.com/in/dariocalamai

2 2

problem with Sentry3-MIB, 3 phase CDU's
by Darrell Budic 21 Apr '12

21 Apr '12

Hi, Running Observium 0.11.12.2749 on SL5 for this issue. Updated to 3069 and still has the same issues. But anyway: Noticed my Sentry CDU's were not picking up current or voltage information, tracked it down to a issue with the MIB. Not sure if it's the MIB in general or my version of the snmp utilities, but the discovery module complains it can't find the MIB when run in debug mode. Turns out my snmpget doesn't like the whitespace before the "Sentry3-MIB DEFINITIONS ::= BEGIN" line. I removed the whitespace and discovered the sensors. Then I noticed I had 3 phase CDU's, and the discovery code for the Sentrys only deals with 1 phase units. Here's the diffs of my hack to enable detection of all 3 phases. I think this will work on single phase units as well, although it will probably take a little longer as it scans for the nonexistent phases. I have no single phase units to test it on, however, so YMMV. 16c16,20 < $infeed_oids = snmp_walk($device, "infeedID.$towers.1", "-Osqn", "Sentry3-MIB"); --- > # These PDUs may have > 1 infeed for 3 phase systems > $phase=1; > while ($phase <= 3) { > > $infeed_oids = snmp_walk($device, "infeedID.$towers.$phase", "-Osqn", "Sentry3-MIB"); 31c35 < $infeed_oid = "1.3.6.1.4.1.1718.3.2.2.1.7." . $towers . ".1"; --- > $infeed_oid = "1.3.6.1.4.1.1718.3.2.2.1.7." . $towers . "." . $phase; 33c37 < $descr_string = snmp_get($device,"infeedID.$towers.$infeed_index", "-Ovq", "Sentry3-MIB"); --- > $descr_string = snmp_get($device,"infeedID.$towers.$phase", "-Ovq", "Sentry3-MIB"); 37,38c41,42 < $high_warn_limit = snmp_get($device,"infeedLoadHighThresh.$towers.$infeed_index", "-Ovq", "Sentry3-MIB"); < $high_limit = snmp_get($device,"infeedCapacity.$towers.$infeed_index", "-Ovq", "Sentry3-MIB"); --- > $high_warn_limit = snmp_get($device,"infeedLoadHighThresh.$towers.$phase", "-Ovq", "Sentry3-MIB"); > $high_limit = snmp_get($device,"infeedCapacity.$towers.$phase", "-Ovq", "Sentry3-MIB"); 42c46 < discover_sensor($valid['sensor'], 'current', $device, $infeed_oid, $towers, 'sentry3', $descr, $divisor, $multiplier, $low_limit, $low_warn_limit, $high_warn_limit, $high_limit, $current); --- > discover_sensor($valid['sensor'], 'current', $device, $infeed_oid, "$towers.$phase" , 'sentry3', $descr, $divisor, $multiplier, $low_limit, $low_warn_limit, $high_warn_limit, $high_limit, $current); 48c52 < $outlet_oids = snmp_walk($device, "outletLoadValue.$towers.1", "-Osqn", "Sentry3-MIB"); --- > $outlet_oids = snmp_walk($device, "outletLoadValue.$towers.$phase", "-Osqn", "Sentry3-MIB"); 61c65 < $outletsuffix = "$towers.$infeed_index.$outlet_index"; --- > $outletsuffix = "$towers.$phase.$outlet_index"; 103a108,109 > $phase++; > } //if($phase) Hope it helps someone :) Thanks for the nice work! -Darrell

1 0

Data collection stopped
by Chris Stone 20 Apr '12

20 Apr '12

Data collection stopped today - running build 3060 - was working fine with that for awhile, so not sure what happened. Running poller manually I get the error: dot3StatsDuplexStatus/usr/bin/snmpbulkwalk -v2c -c public -OQUs -m EtherLike-MIB -M /opt/observium/mibs udp:axis-core-01.axint.net:161 dot3StatsDuplexStatus dot3StatsDuplexStatus = No Such Object available on this agent at this OID SQL[SELECT COUNT(*) FROM `ports` WHERE `device_id` = '1' AND `ifType` = 'adsl'] /usr/bin/snmpbulkwalk -v2c -c public -OQUs -m Q-BRIDGE-MIB -M /opt/observium/mibs udp:axis-core-01.axint.net:161 dot1qPortVlanTable dot1qPortVlanTable = No Such Object available on this agent at this OID /usr/bin/snmpbulkwalk -O QUs -v2c -c public -M /opt/observium/mibs -m Q-BRIDGE-MIB udp:axis-core-01.axint.net:161 dot1qVlanCurrentEgressPorts 2>/dev/null dot1qVlanCurrentEgressPorts = No Such Object available on this agent at this OID /usr/bin/snmpbulkwalk -v2c -c public -OQUs -m Q-BRIDGE-MIB -M /opt/observium/mibs udp:axis-core-01.axint.net:161 dot1dBasePortIfIndex dot1dBasePortIfIndex = No Such Object available on this agent at this OID SQL[SELECT * FROM `ports` WHERE `device_id` = '1'] Port lo(1) PHP Fatal error: Call to a member function get() on a non-object in /opt/observium/includes/polling/ports.inc.php on line 168 Fatal error: Call to a member function get() on a non-object in /opt/observium/includes/polling/ports.inc.php on line 168 Suggestions? Anyone else seeing this? Oh, this is PHP 5.3.10 and Observium build 3060. -- Chris Stone AxisInternet, Inc. www.axint.net

2 5

I/O wait
by Ciro Iriarte 19 Apr '12

19 Apr '12

Hi!, I noticed just today that observium doesn't graph i/o wait time from CPU usage. Only user/nice/system/idle, i/o wait is not provided by SNMP or it's just missing in Observium? Regards, -- Ciro Iriarte http://cyruspy.wordpress.com --

6 17

Remove ports from Web Overview
by Philip Möller 16 Apr '12

16 Apr '12

Hi, I have a performance issue with the Observium Web Interface. The Apache2 webserver needs about 4-5 minutes to load all graphs of some devices. The devices are CISCO NEXUS 5548 switches with CISCO NEXUS 2248 FEX (Fabric Extenders). One 5548 switch will have about 7488 Interfaces when fully populated (48 local interfaces + 48 local virtual interfaces + 24 * 52 + 52 interfaces for the extenders). I do not need to monitor or graph all the edge / access layer ports but only the backbone ports ( 144 ports ). As far as I understand the documentation all ports flagged as disabled are not polled any more and all ports that are deleted are not shown by the Apache2. Unfortunately the poller.php run updates disabled = 0 for all ports found on the device and they are back in the web interface overview. I cannot find the statement in the poller.php debug output but all Ports with deleted = 1 set manually are updated to deleted = 0 after a poller.php run. My question is if there is any way to delete available ports I do not want to have in the web overview or to drain those ports from the web interface. With bet regards, --- Philip Möller Senior Linux Systemadministrator International IT Operations Bigpoint GmbH Drehbahn 47-48 20354 Hamburg | Germany Tel: +49(0)40.88 1413-356 Cell: +49(0)151 27471095 E-Mail: p.moeller(a)bigpoint.net<mailto:p.moeller@bigpoint.net> --- CEO: Heiko Hubertz Business Registration: HRB-Hamburg 94148

3 8

Re: [Observium] Date Picker broken
by Timo Ament 12 Apr '12

12 Apr '12

Hi Folks, same issue as Bruce - setting the Date Picker reverts you back to the start-page. Normally, when opening a graph the url is something like: http://observium/graphs/type=customer_bits/to=1334238800/id=server/from=133… Now when changing the time-range and klicking "update" the URL is beeing transformed into: http://observium/index.php/graphs/type=customer_bits/to=1334238800/id=serve… When i remove the index.php from the url i am getting the desired result. Currently running 3026 Regards Timo Am 12.04.2012 13:00, schrieb observium-request(a)observium.org: > Re: Date Picker broken

4 3

Date Picker broken
by Bruce-Young Majola 12 Apr '12

12 Apr '12

Hi, Please have a look at the date picker for graphs, it looks to be broken and the latest version of Observium. It takes you back to the "Home" page whenever you click the Update button. Is anyone having the same issue? Regards, Bruce DISCLAIMER: The information in this message is confidential and may be legally privileged. It is intended solely for the addressee. Access to this message by anyone else is unauthorized. If you are not the intended recipient, any disclosure, copying, or distribution of the message, or any action or omission taken by you in reliance on it, is prohibited and may be unlawful. Please immediately contact the sender if you have received this message in error. SWIFTNET and any of its subsidiaries each reserve the right to monitor all e-mail communications through its networks. Thank you.

4 3

Device Graphs page blank
by Chris Stone 11 Apr '12

11 Apr '12

Not sure when this started, but I've got a couple of Linux servers where suddenly the Graphs tab on them blank. The page layout is all there, but the part under the heading Graphs where the graphs and netstats links and graphs should be is empty. Checked the apache logs and see nothing there indicating any problem and poller.php runs fine - one of them: Observium Poller v0.12.4.3008 Starting polling run: pegasus.domain.com 65 linux (unix) Using hrSystemUptime (384:13:39:50.94) Uptime: 1 years, 19 days, 13h 39m 50s Hardware: Generic x86 64-bit Version: 2.6.18-164.6.1.el5 Features: CentOS 5.7 Processor Intel Xeon 2.80GHz... 10% Processor Intel Xeon 2.80GHz... 9% Processor Intel Xeon 2.80GHz... 11% Processor Intel Xeon 2.80GHz... 11% Mempool Physical memory: 88.23% Mempool Virtual memory: 43.62% Mempool Swap space: 0.52% Storage /: 19% Storage /boot: 35% Polling Netstats: IP TCP UDP ICMP SNMP HR Stats: Processes Users Polling IP-MIB ipSystemStats ipv4 ipv6 Caching Oids: ifEntry ifXEntry dot3StatsDuplexStatus Port lo(1) HC HC VLAN == bps(37.4kbps/37.4kbps)bytes(434kB/434kB)pkts(38.9pps/38.9pps) Port eth0(2) HC HC dot3Duplex VLAN == bps(340kbps/336kbps)bytes(3.86MB/3.81MB)pkts(153pps/149pps) Port eth1(3) HC dot3Duplex VLAN == bps(0bps/0bps)bytes(0B/0B)pkts(0pps/0pps) Port sit0(4) HC VLAN == bps(0bps/0bps)bytes(0B/0B)pkts(0pps/0pps) Module [ bgp-peers ] disabled on host. Module [ junose-atm-vp ] disabled on host. Module [ toner ] disabled on host. Checking UCD DiskIO MIB: sda sda1 sda2 sda3 Applications: apache mailscanner Module [ wifi ] disabled on host. Module [ ospf ] disabled on host. Module [ cisco-ipsec-flow-monitor ] disabled on host. Module [ cisco-remote-access-monitor ] disabled on host. Module [ cisco-cef ] disabled on host. Module [ cisco-mac-accounting ] disabled on host. Module [ cipsec-tunnels ] disabled on host. Module [ cisco-ace-loadbalancer ] disabled on host. Module [ cisco-ace-serverfarms ] disabled on host. Module [ netscaler-vsvr ] disabled on host. Entity Physical: Module [ unix-agent ] disabled globally. Polled in 1.292 seconds UPDATED! MySQL: Cell[0/0s] Row[3/0s] Rows[11/0s] Column[0/0s] Update[14/0.01s] Insert[1/0s] Delete[0/0s] Ran poller also in debug mode and saw no errors - everything appeared normal. Just see this on a couple of CentOS 5.x and CentOS 6.x servers - have many others (same OSs) that are fine.... Ideas? Chris -- Chris Stone AxisInternet, Inc. www.axint.net

3 6

IPSLA snmp monitoring
by Bruce-Young Majola 10 Apr '12

10 Apr '12

Hi, I have upgraded to the latest version of Observium to try out IPSLA monitoring features; I have specifically configured IPSLA for ICMP Echo operation. The graph legends are there however nothing is being graphed in Observium. Regards Bruce DISCLAIMER: The information in this message is confidential and may be legally privileged. It is intended solely for the addressee. Access to this message by anyone else is unauthorized. If you are not the intended recipient, any disclosure, copying, or distribution of the message, or any action or omission taken by you in reliance on it, is prohibited and may be unlawful. Please immediately contact the sender if you have received this message in error. SWIFTNET and any of its subsidiaries each reserve the right to monitor all e-mail communications through its networks. Thank you.

1 0

doc bug at http://www.observium.org/wiki/Services
by Andrew Beals 09 Apr '12

09 Apr '12

Someone needs to s/Paramaters/Parameters/ On the wiki page @ http://www.observium.org/wiki/Services -- Andrew Beals c: 913-787-7538 ABeals(a)mersoft.com

1 0

Can not see device pages
by Zafar Pravaiz 09 Apr '12

09 Apr '12

Hi After updating to latest release i am not able to see the device in brower. When every i click on any device from default page i get noting. Here is the debug from apache log. Any body have any idea? Thanks [Sun Apr 08 09:58:51 2012] [error] an unknown filter was not added: INCLUDES [Sun Apr 08 09:58:51 2012] [error] an unknown filter was not added: INCLUDES [Sun Apr 08 09:58:51 2012] [error] [client 192.168.128.52] PHP Notice: Undefined index: fetchrow_sec in /opt/observium/includes/dbFacile.php on line 213 [Sun Apr 08 09:58:51 2012] [error] [client 192.168.128.52] PHP Notice: Undefined index: fetchrow in /opt/observium/includes/dbFacile.php on line 214 [Sun Apr 08 09:58:51 2012] [error] [client 192.168.128.52] PHP Notice: Undefined index: fetchrows_sec in /opt/observium/includes/dbFacile.php on line 174 [Sun Apr 08 09:58:51 2012] [error] [client 192.168.128.52] PHP Notice: Undefined index: fetchrows in /opt/observium/includes/dbFacile.php on line 175 [Sun Apr 08 09:58:51 2012] [error] [client 192.168.128.52] PHP Notice: Undefined offset: 1 in /opt/observium/html/index.php on line 80 [Sun Apr 08 09:58:51 2012] [error] [client 192.168.128.52] PHP Notice: Use of undefined constant yes - assumed 'yes' in /opt/observium/html/index.php on line 83 [Sun Apr 08 09:58:51 2012] [error] [client 192.168.128.52] PHP Notice: Undefined offset: 1 in /opt/observium/html/index.php on line 80 [Sun Apr 08 09:58:51 2012] [error] [client 192.168.128.52] PHP Notice: Use of undefined constant yes - assumed 'yes' in /opt/observium/html/index.php on line 83 [Sun Apr 08 09:58:51 2012] [error] [client 192.168.128.52] PHP Notice: Undefined index: widescreen in /opt/observium/html/index.php on line 144 [Sun Apr 08 09:58:51 2012] [error] [client 192.168.128.52] PHP Notice: Undefined index: bare in /opt/observium/html/index.php on line 238 [Sun Apr 08 09:58:51 2012] [error] [client 192.168.128.52] PHP Notice: Undefined index: widescreen in /opt/observium/html/includes/header.inc.php on line 18 [Sun Apr 08 09:58:51 2012] [error] [client 192.168.128.52] PHP Notice: Undefined variable: devices in /opt/observium/html/includes/topnav.inc.php on line 13 [Sun Apr 08 09:58:51 2012] [error] [client 192.168.128.52] PHP Notice: Undefined index: count in /opt/observium/html/includes/topnav.inc.php on line 13 [Sun Apr 08 09:58:51 2012] [error] [client 192.168.128.52] PHP Notice: Undefined index: device_types in /opt/observium/html/includes/topnav.inc.php on line 18 [Sun Apr 08 09:58:51 2012] [error] [client 192.168.128.52] PHP Notice: Undefined index: in /opt/observium/html/includes/topnav.inc.php on line 18 [Sun Apr 08 09:58:51 2012] [error] [client 192.168.128.52] PHP Notice: Undefined index: network in /opt/observium/html/includes/topnav.inc.php on line 18 [Sun Apr 08 09:58:51 2012] [error] [client 192.168.128.52] PHP Notice: Undefined index: loadbalancer in /opt/observium/html/includes/topnav.inc.php on line 18 [Sun Apr 08 09:58:51 2012] [error] [client 192.168.128.52] PHP Notice: Undefined index: server in /opt/observium/html/includes/topnav.inc.php on line 18 [Sun Apr 08 09:58:51 2012] [error] [client 192.168.128.52] PHP Notice: Undefined index: firewall in /opt/observium/html/includes/topnav.inc.php on line 18 [Sun Apr 08 09:58:51 2012] [error] [client 192.168.128.52] PHP Notice: Undefined index: wireless in /opt/observium/html/includes/topnav.inc.php on line 18 [Sun Apr 08 09:58:51 2012] [error] [client 192.168.128.52] PHP Notice: Use of undefined constant bgcolour - assumed 'bgcolour' in /opt/observium/html/includes/topnav.inc.php on line 67 [Sun Apr 08 09:58:51 2012] [error] [client 192.168.128.52] PHP Notice: Undefined variable: ignore_dev_location in /opt/observium/html/includes/functions.inc.php on line 450 [Sun Apr 08 09:58:51 2012] [error] [client 192.168.128.52] PHP Notice: Undefined variable: locations in /opt/observium/html/includes/functions.inc.php on line 452 [Sun Apr 08 09:58:51 2012] [error] [client 192.168.128.52] PHP Warning: in_array() expects parameter 2 to be array, null given in /opt/observium/html/includes/functions.inc.php on line 452 [Sun Apr 08 09:58:51 2012] [error] [client 192.168.128.52] PHP Notice: Undefined variable: ignore_dev_location in /opt/observium/html/includes/functions.inc.php on line 450 [Sun Apr 08 09:58:51 2012] [error] [client 192.168.128.52] PHP Notice: Undefined variable: ignore_dev_location in /opt/observium/html/includes/functions.inc.php on line 450 [Sun Apr 08 09:58:51 2012] [error] [client 192.168.128.52] PHP Notice: Undefined variable: ignore_dev_location in /opt/observium/html/includes/functions.inc.php on line 450 [Sun Apr 08 09:58:51 2012] [error] [client 192.168.128.52] PHP Notice: Undefined variable: ignore_dev_location in /opt/observium/html/includes/functions.inc.php on line 450 [Sun Apr 08 09:58:51 2012] [error] [client 192.168.128.52] PHP Notice: Undefined variable: ignore_dev_location in /opt/observium/html/includes/functions.inc.php on line 450 [Sun Apr 08 09:58:51 2012] [error] [client 192.168.128.52] PHP Notice: Undefined variable: ignore_dev_location in /opt/observium/html/includes/functions.inc.php on line 450 [Sun Apr 08 09:58:51 2012] [error] [client 192.168.128.52] PHP Notice: Undefined variable: ignore_dev_location in /opt/observium/html/includes/functions.inc.php on line 450 [Sun Apr 08 09:58:51 2012] [error] [client 192.168.128.52] PHP Notice: Undefined variable: ignore_dev_location in /opt/observium/html/includes/functions.inc.php on line 450 [Sun Apr 08 09:58:51 2012] [error] [client 192.168.128.52] PHP Notice: Undefined variable: ignore_dev_location in /opt/observium/html/includes/functions.inc.php on line 450 [Sun Apr 08 09:58:51 2012] [error] [client 192.168.128.52] PHP Notice: Undefined variable: ignore_dev_location in /opt/observium/html/includes/functions.inc.php on line 450 [Sun Apr 08 09:58:51 2012] [error] [client 192.168.128.52] PHP Notice: Undefined variable: ignore_dev_location in /opt/observium/html/includes/functions.inc.php on line 450 [Sun Apr 08 09:58:51 2012] [error] [client 192.168.128.52] PHP Notice: Undefined variable: ignore_dev_location in /opt/observium/html/includes/functions.inc.php on line 450 [Sun Apr 08 09:58:51 2012] [error] [client 192.168.128.52] PHP Notice: Undefined variable: ignore_dev_location in /opt/observium/html/includes/functions.inc.php on line 450 [Sun Apr 08 09:58:51 2012] [error] [client 192.168.128.52] PHP Notice: Undefined variable: ignore_dev_location in /opt/observium/html/includes/functions.inc.php on line 450 [Sun Apr 08 09:58:51 2012] [error] [client 192.168.128.52] PHP Notice: Undefined variable: ignore_dev_location in /opt/observium/html/includes/functions.inc.php on line 450 [Sun Apr 08 09:58:51 2012] [error] [client 192.168.128.52] PHP Notice: Undefined variable: ignore_dev_location in /opt/observium/html/includes/functions.inc.php on line 450 [Sun Apr 08 09:58:51 2012] [error] [client 192.168.128.52] PHP Notice: Undefined variable: ignore_dev_location in /opt/observium/html/includes/functions.inc.php on line 450 [Sun Apr 08 09:58:51 2012] [error] [client 192.168.128.52] PHP Notice: Undefined variable: ignore_dev_location in /opt/observium/html/includes/functions.inc.php on line 450 [Sun Apr 08 09:58:51 2012] [error] [client 192.168.128.52] PHP Notice: Undefined index: admindown in /opt/observium/html/includes/print-menubar.php on line 288 [Sun Apr 08 09:58:51 2012] [error] [client 192.168.128.52] PHP Notice: Undefined index: deleted in /opt/observium/html/includes/print-menubar.php on line 290 [Sun Apr 08 09:58:51 2012] [error] [client 192.168.128.52] PHP Notice: Undefined index: humidity in /opt/observium/html/includes/print-menubar.php on line 347 [Sun Apr 08 09:58:51 2012] [error] [client 192.168.128.52] PHP Notice: Undefined index: frequency in /opt/observium/html/includes/print-menubar.php on line 362 [Sun Apr 08 09:58:51 2012] [error] [client 192.168.128.52] PHP Notice: Undefined index: power in /opt/observium/html/includes/print-menubar.php on line 362 [Sun Apr 08 09:58:51 2012] [error] [client 192.168.128.52] PHP Notice: Undefined index: fetchcell_sec in /opt/observium/includes/dbFacile.php on line 236 [Sun Apr 08 09:58:51 2012] [error] [client 192.168.128.52] PHP Notice: Undefined index: fetchcell in /opt/observium/includes/dbFacile.php on line 237 NET-SNMP version: 5.4.2.1 [Sun Apr 08 09:58:51 2012] [error] [client 192.168.128.52] PHP Notice: Undefined variable: devel in /opt/observium/html/index.php on line 254 [Sun Apr 08 09:58:51 2012] [error] [client 192.168.128.52] PHP Notice: Undefined index: devel in /opt/observium/html/index.php on line 254 [Sun Apr 08 09:58:52 2012] [error] [client 192.168.128.52] PHP Notice: Undefined index: fetchcol in /opt/observium/html/index.php on line 301 [Sun Apr 08 09:58:52 2012] [error] [client 192.168.128.52] PHP Notice: Undefined index: fetchcol_sec in /opt/observium/html/index.php on line 301 [Sun Apr 08 09:58:52 2012] [error] [client 192.168.128.52] PHP Notice: Undefined variable: neg in /opt/observium/includes/common.php on line 498 [Sun Apr 08 09:58:52 2012] [error] [client 192.168.128.52] PHP Notice: Undefined variable: neg in /opt/observium/includes/common.php on line 498 [Sun Apr 08 09:58:52 2012] [error] [client 192.168.128.52] PHP Notice: Undefined variable: neg in /opt/observium/includes/common.php on line 498 [Sun Apr 08 09:58:52 2012] [error] [client 192.168.128.52] PHP Notice: Undefined variable: pagetitle in /opt/observium/html/index.php on line 328 [Sun Apr 08 09:58:52 2012] [debug] mod_deflate.c(615): [client 192.168.128.52] Zlib: Compressed 4145488 to 81959 : URL /observium/index.php/device/device=2/debug/ -- *Zafar Pravaiz *

3 6

some patches.
by Rob J. Epping 07 Apr '12

07 Apr '12

Hi, Here are some patches I made to my Observium install. <http://puther.home.xs4all.nl/observium-rebooted-fix.diff> Only show rebooted systems on front page when uptime > 0 For SNMP-agents that do not report uptime (EMC VNX5300 for one) <http://puther.home.xs4all.nl/observium-axis.diff> Also detects Axis video servers. <http://puther.home.xs4all.nl/observium-dell-unix-sn.diff> Detect Dell servicetag as serialnumber through dell MIB on "unix" systems, <http://puther.home.xs4all.nl/observium-dell-windows.diff> Detect Dell systems and servivcetag the same way as on "unix" <http://puther.home.xs4all.nl/observium-esx-linux.diff> Access VMware mibs through net-snmp using config from <http://www.vmware.com/pdf/vsp_4_snmp_config.pdf> <http://puther.home.xs4all.nl/observium-procurve-sn.diff> Get serial-number for HP switches. <http://puther.home.xs4all.nl/observium-rename-host.diff> Improvements to command-line rename-host Can these be include in Observium? THNX! BTW: can you also include Paul Gear's <paul(a)libertysys.com.au> patch for non-FQDN rancid? <http://libertysys.com.au/patches/observium/observium-r2339-rancid-non-fqdn.…> And the fortigate patches from Matthias Cramer which <matthias.cramer(a)iway.ch> i've made available for download on <http://puther.home.xs4all.nl/observium-fortigate.diff> and <http://puther.home.xs4all.nl/observium-fgt-proc.diff> Both were send to the mailinglist a while ago. -- GRTNX, RobJE

1 0

PIX 501 support
by Chris Stone 06 Apr '12

06 Apr '12

I have a couple of Cisco PIX 501's setup in Observium, but they are being seen only as Generic Devices: Cisco PIX Firewall Version 6.3(5) Operating System Generic Device Contact support(a)axint.net Location Denver, CO Uptime 291 days, 22h 45m 55s And the only graphs I am getting are Uptime and the ethernet port counters (traffic, packets, etc). Nothing for memory or cpu. Both firewalls are the same - here's the info on one of them: voip-fw# show ver Cisco PIX Firewall Version 6.3(5) Cisco PIX Device Manager Version 3.0(4) Compiled on Thu 04-Aug-05 21:40 by morlee voip-fw up 291 days 22 hours Hardware: PIX-501, 16 MB RAM, CPU Am5x86 133 MHz Flash E28F640J3 @ 0x3000000, 8MB BIOS Flash E28F640J3 @ 0xfffd8000, 128KB 0: ethernet0: address is 0016.c836.223a, irq 9 1: ethernet1: address is 0016.c836.223c, irq 10 Licensed Features: Failover: Disabled VPN-DES: Enabled VPN-3DES-AES: Enabled Maximum Physical Interfaces: 2 Maximum Interfaces: 2 Cut-through Proxy: Enabled Guards: Enabled URL-filtering: Enabled Inside Hosts: 10 Throughput: Unlimited IKE peers: 10 My understanding was that PIX firewalls were supported. Is what I am getting all the support there currently is? Or is there something else I need to do to enable cpu and memory counters. I had them setup in Cacti previously, so it would seem that the SNMP counters do exist. -- Chris Stone AxisInternet, Inc. www.axint.net

6 9

netstat graph broken
by Nikolay Shopik 05 Apr '12

05 Apr '12

Hey, Just noticed that netstat graphs seems broken, not all graphs are drawn, r2922 is here.

3 5

ATM interfaces not showing on Device Overview
by Bruce-Young Majola 05 Apr '12

05 Apr '12

Hi Adam, I am having a strange issues which I need your help in troubleshooting. I have this 7606 which has ATM interfaces configured but the problem is that when I discover this device, all the interfaces are discovered include ATM ones but as soon as the poller runs, they disappear again. I am not sure how to fix this issues. I am running the latest version of Observium. Thanks for your help. After discovery After poller has run Regards, Bruce Majola DISCLAIMER: The information in this message is confidential and may be legally privileged. It is intended solely for the addressee. Access to this message by anyone else is unauthorized. If you are not the intended recipient, any disclosure, copying, or distribution of the message, or any action or omission taken by you in reliance on it, is prohibited and may be unlawful. Please immediately contact the sender if you have received this message in error. SWIFTNET and any of its subsidiaries each reserve the right to monitor all e-mail communications through its networks. Thank you.

5 13

Re: [Observium] [Observium-dev] r2955 - in observer/trunk: . includes includes/polling
by Paul Gear 05 Apr '12

05 Apr '12

On 05/04/12 04:10, observium-commits(a)observium.org wrote: > Author: adama > Date: 2012-04-04 19:10:45 +0100 (Wed, 04 Apr 2012) > New Revision: 2955 > ... > Log: > Add support for memcached to poller for current bps/pps for ports and ability to disable writing these values to MySQL. HIGHLY RECOMMENDED FOR LARGE INSTALLS. Also PROCEED WITH CAUTION. How many ports == "LARGE INSTALLS"?

3 4

Re: [Observium] poller doesn’t kick the apache-stats.py script
by Andrew Beals 05 Apr '12

05 Apr '12

Rather than modifying the poller script, simply commenting out the "mibs :" line at the bottom of /etc/snmp/snmp.conf on your Observium server box is sufficient to get the polling to work correctly. Ubuntu put that line in citing "licensing issues" with the MIBs.

3 4

rrd time selection is wrong
by Nikolay Shopik 04 Apr '12

04 Apr '12

It seems like when you select time to show graph it doesn't take in consideration timezone. Basically if I select from 18:00 till now and press update time in "From" field update to 22:00 (I have GMT+4 zone). You can click update multiply times and graph time will be moving after each click.

2 3

VRF Names truncated in version 0.12.4.2946
by Bruce-Young Majola 03 Apr '12

03 Apr '12

Hi, I just upgraded to the latest version of Observium and I noticed after running discovery that the VRF descriptions are now truncated, see below. Before upgrade: After upgrade Regards, Bruce Majola DISCLAIMER: The information in this message is confidential and may be legally privileged. It is intended solely for the addressee. Access to this message by anyone else is unauthorized. If you are not the intended recipient, any disclosure, copying, or distribution of the message, or any action or omission taken by you in reliance on it, is prohibited and may be unlawful. Please immediately contact the sender if you have received this message in error. SWIFTNET and any of its subsidiaries each reserve the right to monitor all e-mail communications through its networks. Thank you.

1 0

SNMPv3 implementation
by Guillaume Leclanche 31 Mar '12

31 Mar '12

Hello, attached is the patch for the implementation of SNMPv3. I've been testing it on my system and devices, and it seems to be working properly. Since it's a core function of the soft, I guess it would be good that other people give it a try before it is committed. I use NET-SNMP version: 5.4.3. Be careful that a few files use direct calls to net-snmp instead of calling observium library functions. It means that those calls will not work with an snmpv3 device. includes/discovery/cisco-mac-accounting.inc.php: $datas = shell_exec($config['snmpbulkwalk'] . " -M ".$config['mibdir']." -m CISCO-IP-STAT-MIB -Oqn -".$device['snmpver']." -c ".$device['community']." ".$device['hostname']." cipMacSwitchedBytes"); includes/discovery/cisco-pw.inc.php: $oids = shell_exec($config['snmpwalk'] . " -M " . $config['mibdir'] . " -m CISCO-IETF-PW-MIB -CI -Ln -Osqn -" . $device['snmpver'] . " -c " . $device['community'] . " " . $device['hostname'].":".$device['port'] . " cpwVcID"); includes/discovery/cisco-pw.inc.php: list($cpw_remote_id) = explode(":", shell_exec($config['snmpget'] . " -M " . $config['mibdir'] . " -m CISCO-IETF-PW-MPLS-MIB -Ln -Osqnv -" . $device['snmpver'] . " -c " . $device['community'] . " " . $device['hostname'].":".$device['port'] . " cpwVcMplsPeerLdpID." . $cpwOid)); includes/discovery/cisco-pw.inc.php: $interface_descr = trim(shell_exec($config['snmpwalk'] . " -M " . $config['mibdir'] . " -m CISCO-IETF-PW-MIB -Oqvn -" . $device['snmpver'] . " -c " . $device['community'] . " " . $device['hostname'].":".$device['port'] . " cpwVcName." . $cpwOid)); includes/discovery/temperatures/adva.inc.php: $temperature_chassis = trim(shell_exec($config['snmpget'] . " -M " . $config['mibdir'] . " -O qv -$snmpver -c $community $hostname:$port $oid_chassis")); includes/discovery/temperatures/adva.inc.php: $temperature_stm16 = trim(shell_exec($config['snmpget'] . " -M " . $config['mibdir'] . " -O qv -$snmpver -c $community $hostname:$port $oid_stm16")); includes/discovery/temperatures/adva.inc.php: $temperature_hss1 = trim(shell_exec($config['snmpget'] . " -M " . $config['mibdir'] . " -O qv -$snmpver -c $community $hostname:$port $oid_hss1")); includes/discovery/temperatures/adva.inc.php: $temperature_hss2 = trim(shell_exec($config['snmpget'] . " -M " . $config['mibdir'] . " -O qv -$snmpver -c $community $hostname:$port $oid_hss2")); includes/discovery/cisco-vrf.inc.php: $vrf['name'] = trim(shell_exec($config['snmpget'] . " -M " . $config['mibdir'] . " -m MPLS-VPN-MIB -Ln -Osq -" . $device['snmpver'] . " -c " . $device['community'] . " " . $device['hostname'].":".$device['port'] . " mplsVpnVrfRouteDistinguisher.".$vrf['oid'])); includes/discovery/cisco-vrf.inc.php: $vrf['mplsVpnVrfDescription'] = trim(shell_exec($config['snmpget'] . " -M " . $config['mibdir'] . " -m MPLS-VPN-MIB -Ln -Osqvn -" . $device['snmpver'] . " -c " . $device['community'] . " " . $device['hostname'].":".$device['port'] . " mplsVpnVrfDescription.".$vrf['oid'])); includes/discovery/cisco-vrf.inc.php: $ports = shell_exec($config['snmpwalk'] . " -M " . $config['mibdir'] . " -m MPLS-VPN-MIB -CI -Ln -Osqn -" . $device['snmpver'] . " -c " . $device['community'] . " " . $device['hostname'].":".$device['port'] . " $ports_oid"); includes/polling/os/ironware.inc.php:$hardware = trim(exec($config['snmpget'] . " -M ".$config['mibdir'] . " -O vqs -m FOUNDRY-SN-AGENT-MIB:FOUNDRY-SN-ROOT-MIB -" . $device['snmpver'] . " -c " . $device['community'] . " " . includes/polling/os/ironware.inc.php:$version = trim(exec($config['snmpget'] . " -M ".$config['mibdir'] . " -O vqs -m FOUNDRY-SN-AGENT-MIB:FOUNDRY-SN-ROOT-MIB -" . $device['snmpver'] . " -c " . $device['community'] . " " . includes/polling/os/speedtouch.inc.php:$loop = shell_exec($config['snmpget'] . " -M ".$config['mibdir'] . ' -Ovq -v1 -c '.$device['community'].' '.$device['hostname'].' ifDescr.101'); I will send a patch to fix cisco-vrf after this mail, but the other files will still be incompatible with snmpv3 (keep your devices in SNMPv2 if you use any of the incompatible calls). Guillaume

1 1

Cisco-vrf discovery - huge performance improvement
by Guillaume Leclanche 31 Mar '12

31 Mar '12

Hi, As I wanted to make Cisco VRF discovery SNMPv3-compatible, I realized that it was actually very slow. So I change the philosophy of it (bulkwalk all SNMP info first then analyze in the code), and here's the result for a device with 500 VRFs: Old version : Discovered in 65.83 seconds New version : Discovered in 3.234 seconds At the same time I made it SNMPv3-compatible, and I added the support for CISCO-L3VPN-STD-MIB that is the more recent MIB and the only one supported on the latest releases of IOS/IOS-XR. I tested it with Cisco Hw and it's fine, but for the other vendors implementing the MIB, somebody else will have to test it :) Guillaume

1 0

Re: [Observium] Legend shows not-existent interfaces
by Nikolay Shopik 29 Mar '12

29 Mar '12

Adam, Thanks, you right. Forgot to purge these deleted interfaces, my bad. On 29/03/12 14:21, Adam Armstrong wrote: > The duplicate interfaces are almost certainly instances where the device > has rebooted and the interface has changed ifIndex. Check the ports > table for ports for that device_id, you'll probably find duplicated > ifDescrs with different ifIndexes, with the older copies being labelled > as deleted. > > We still draw these interfaces to keep the shape of the graph. (and > that's one of the reasons we keep deleted interfaces in the database). > > adam. > > > On 2012-03-29 11:18, Nikolay Shopik wrote: >> Hi Adam, >> >> Here is graph and debug output. >> >> On 29/03/12 13:11, Adam Armstrong wrote: >>> Do you have an example? >>> >>> run the graph URL with&debug=1 on the end. >>> >>> adam. >>> >>> >>> On 2012-03-29 09:06, Nikolay Shopik wrote: >>>> When you open Total Traffic graph, you may see in Legend interfaces >>>> which doesn't really exist on this device. >>>> Additionally sometimes you may see duplicate interfaces in Legend, >>>> which >>>> do exist. >>>> I wonder what may cause of this and to fix it? >>>> _______________________________________________ >>>> observium mailing list >>>> observium(a)observium.org >>>> http://postman.memetic.org/cgi-bin/mailman/listinfo/observium >>> _______________________________________________ >>> observium mailing list >>> observium(a)observium.org >>> http://postman.memetic.org/cgi-bin/mailman/listinfo/observium >

2 2

Legend shows not-existent interfaces
by Nikolay Shopik 29 Mar '12

29 Mar '12

When you open Total Traffic graph, you may see in Legend interfaces which doesn't really exist on this device. Additionally sometimes you may see duplicate interfaces in Legend, which do exist. I wonder what may cause of this and to fix it?

2 1

Get Interface UP and DOWN mails for ignored ports since about r2922
by Matthias Cramer 27 Mar '12

27 Mar '12

Hi Adam and All since about r2922 I get DOWN and UP alert mail for Ports ignored by $config['bad_if_regexp'][] = "/^tnl[0-9]/"; Looks like this is not checked when sending mail, only on the web front end. Would be very very nice if that can be fixed. Regards Matthias P.S. What about my Patches (Fortiigate & Communifate Pro) will the be included soon or do you need anything from me? -- Matthias Cramer / mc322-ripe Senior Network & Security Engineer iway AG Phone +41 43 500 1111 Badenerstrasse 569 Fax +41 44 271 3535 CH-8048 Zurich http://www.iway.ch/ GnuPG 1024D/2D208250 = DBC6 65B6 7083 1029 781E 3959 B62F DF1C 2D20 8250

2 1

Not all filesystems added to Observium
by Ciro Iriarte 23 Mar '12

23 Mar '12

Hi, I have this working without issues for RHEL5 and SLES11, but on a openSUSE host the filesystems built on top of LVM are not shown... The walk gives them all: HOST-RESOURCES-MIB::hrStorageDescr.10 = STRING: Swap space HOST-RESOURCES-MIB::hrStorageDescr.31 = STRING: / HOST-RESOURCES-MIB::hrStorageDescr.32 = STRING: /usr/local/pgsql HOST-RESOURCES-MIB::hrStorageDescr.34 = STRING: /dev/shm HOST-RESOURCES-MIB::hrStorageDescr.35 = STRING: /run HOST-RESOURCES-MIB::hrStorageDescr.39 = STRING: /sys/fs/cgroup HOST-RESOURCES-MIB::hrStorageDescr.50 = STRING: /var/lock HOST-RESOURCES-MIB::hrStorageDescr.51 = STRING: /var/run HOST-RESOURCES-MIB::hrStorageDescr.56 = STRING: /media HOST-RESOURCES-MIB::hrStorageDescr.57 = STRING: /boot But observium only shows info for /boot, /dev/shm, /media /run,/sys/fs/cgroup, /var/lock and /var/run. On SLES I don't see "in memory/not real" filesystems like /proc or /sys. Regards, -- Ciro Iriarte http://cyruspy.wordpress.com --

2 2

Observium 2901 Break
by Zafar Pravaiz 18 Mar '12

18 Mar '12

hi After upgrading the observium it show all device down. When i run the discovery it shows as follow. Observium v0.12.3.2901 Discovery MySQL: Cell[1/0s] Row[1/0s] Rows[1/0s] Column[0/0s] Update[0/0s] Insert[0/0s] Delete[0/0s]?? Any fix? -- *Zafar Pravaiz *IT Senior Systems Engineer Information Technology Department AUS /> </span><span style='font-size:10.0pt;font-family:Times;mso-bidi-font-family: Tel +971 6 515 2164 Fax +971 6515 2112 American University of Sharjah PO Box 26666, Sharjah United Arab Emirates http://www.aus.edu <http://www.aus.edu/> zpravaiz(a)aus.edu <mailto:youremail@aus.edu>

2 1

Re: [Observium] [Observium-dev] FortiGate Support
by Adam Armstrong 16 Mar '12

16 Mar '12

This is what i was actually replying to, HERP DERP. Also, please use the observium list, observium-dev is mostly just svn. adam. On 2012-02-07 08:15, Matthias Cramer wrote: > Hi > > I'm new on this list, hope this is the right place. > I've improved the Fortigate Support a bit. Moved everything to the newest MIB and added memory and cpu support. > > Attached is a patch based on the current SVN tree. > > Regards > > Matthias > > > > _______________________________________________ > observium-dev mailing list > observium-dev(a)observium.org > http://postman.memetic.org/cgi-bin/mailman/listinfo/observium-dev

2 4

Re: [Observium] bug report: Billing Traffic
by Adam Armstrong 16 Mar '12

16 Mar '12

Lol. that is awesome. There is clearly some odd bug in there. Are you able to give me access to the server to try to work out what it is? adam. On 2012-03-16 14:15, Timbo a la Bazzi wrote: > > Here is the printscreen! > > *Van:*observium-bounces@observium.org > [mailto:observium-bounces@observium.org] *Namens *Adam Armstrong > *Verzonden:* vrijdag 16 maart 2012 13:58 > *Aan:* Observium Network Observation System > *Onderwerp:* Re: [Observium] bug report: Billing Traffic > > can you show us a screenshot from "accurate graphs" for that same bill? > > thanks, > adam. > > On 2012-03-16 11:49, Timbo a la Bazzi wrote: > > Hi There, > > How can I make a bug report? The forum is closed for registration, the > bugtracker also, so I hope this is the correct way and I can help in > the future maybe, because the software is awesome! > > I have the following situation: > > The polling is done correctly and it shows the same results as cacti > for my switch. Buw when I add billing and make a bill for a port with > Quota the first time I add for example 20GB it shows like 20B. If i > then edit it it shows correctly as 20GB (so not 2.0E-8), so there is a > work around. > > When I add a bill for multiple ports the sum is totally wrong. > > For example. I made a bill of 5 ports and 5 bills of each port, so I > can check. > > If a manually sum the 5 bills/ports I get around 80GB. But when I look > at the SUMMED bill it says 1.47PB > > I have added the billing feature this way: > > http://www.observium.org/wiki/Billing > > What am I doing wrong and if it is a bug how can I correct it? > > So there are 2 problems: > > initial quota is set wrong, but can be corrected. -> Bug with a work > around > > quota calculated to high values -> bug or misconfiguration, but I > can't find anything about it: > > So you can see the sum of the 5 ports are 9.36Gbps and it are 5x > 100MBit ports ;-) > > The switch that I am monitoring is a HP2524 > > Thanks in advance! > > Tim Schoondergang > > > > > _______________________________________________ > observium mailing list > observium(a)observium.org <mailto:observium@observium.org> > http://postman.memetic.org/cgi-bin/mailman/listinfo/observium > > > > _______________________________________________ > observium mailing list > observium(a)observium.org > http://postman.memetic.org/cgi-bin/mailman/listinfo/observium

1 0

Re: [Observium] bug report: Billing Traffic
by Adam Armstrong 16 Mar '12

16 Mar '12

can you show us a screenshot from "accurate graphs" for that same bill? thanks, adam. On 2012-03-16 11:49, Timbo a la Bazzi wrote: > > Hi There, > > How can I make a bug report? The forum is closed for registration, the > bugtracker also, so I hope this is the correct way and I can help in > the future maybe, because the software is awesome! > > I have the following situation: > > The polling is done correctly and it shows the same results as cacti > for my switch. Buw when I add billing and make a bill for a port with > Quota the first time I add for example 20GB it shows like 20B. If i > then edit it it shows correctly as 20GB (so not 2.0E-8), so there is a > work around. > > When I add a bill for multiple ports the sum is totally wrong. > > For example. I made a bill of 5 ports and 5 bills of each port, so I > can check. > > If a manually sum the 5 bills/ports I get around 80GB. But when I look > at the SUMMED bill it says 1.47PB > > I have added the billing feature this way: > > http://www.observium.org/wiki/Billing > > What am I doing wrong and if it is a bug how can I correct it? > > So there are 2 problems: > > initial quota is set wrong, but can be corrected. -> Bug with a work > around > > quota calculated to high values -> bug or misconfiguration, but I > can't find anything about it: > > So you can see the sum of the 5 ports are 9.36Gbps and it are 5x > 100MBit ports ;-) > > The switch that I am monitoring is a HP2524 > > Thanks in advance! > > Tim Schoondergang > > > > _______________________________________________ > observium mailing list > observium(a)observium.org > http://postman.memetic.org/cgi-bin/mailman/listinfo/observium

2 1

bug report: Billing Traffic
by Timbo a la Bazzi 16 Mar '12

16 Mar '12

Hi There, How can I make a bug report? The forum is closed for registration, the bugtracker also, so I hope this is the correct way and I can help in the future maybe, because the software is awesome! I have the following situation: The polling is done correctly and it shows the same results as cacti for my switch. Buw when I add billing and make a bill for a port with Quota the first time I add for example 20GB it shows like 20B. If i then edit it it shows correctly as 20GB (so not 2.0E-8), so there is a work around. When I add a bill for multiple ports the sum is totally wrong. For example. I made a bill of 5 ports and 5 bills of each port, so I can check. If a manually sum the 5 bills/ports I get around 80GB. But when I look at the SUMMED bill it says 1.47PB I have added the billing feature this way: http://www.observium.org/wiki/Billing What am I doing wrong and if it is a bug how can I correct it? So there are 2 problems: initial quota is set wrong, but can be corrected. -> Bug with a work around quota calculated to high values -> bug or misconfiguration, but I can't find anything about it: So you can see the sum of the 5 ports are 9.36Gbps and it are 5x 100MBit ports ;-) The switch that I am monitoring is a HP2524 Thanks in advance! Tim Schoondergang

1 0

Re: [Observium] [Observium-dev] OS Detection for Cisco SMB Linux Products
by Adam Armstrong 16 Mar '12

16 Mar '12

Hi Matthias, Please update the patch to use the correct discovery/polling mechanism for the CPU load. We stopped building specific rrds a long time ago, it should be detected the same way as memory pools. Shouldn't be too hard to do :) Thanks, adam. On 2012-02-10 06:36, Matthias Cramer wrote: > Hi > > Added Linux Variant detection for Cisco SMB Products (tested with an AP541N) > > Regards > > Matthias > > Index: includes/static-config.php > =================================================================== > --- includes/static-config.php (revision 2860) > +++ includes/static-config.php (working copy) > @@ -66,7 +66,14 @@ > $config['os'][$os]['over'][2]['graph'] = "device_mempool"; > $config['os'][$os]['over'][2]['text'] = "Memory Usage"; > > +$os = "ciscosmblinux"; > +$config['os'][$os]['type'] = "wireless"; > +$config['os'][$os]['group'] = "unix"; > +$config['os'][$os]['text'] = "Cisco SMB Linux"; > +$config['os'][$os]['icon'] = "cisco"; > > Index: includes/discovery/os/linux.inc.php > =================================================================== > --- includes/discovery/os/linux.inc.php (revision 2860) > +++ includes/discovery/os/linux.inc.php (working copy) > @@ -14,7 +14,7 @@ > if (strpos($entPhysicalMfgName, "QNAP") !== FALSE) { $os = "qnap";} > elseif(strstr($sysObjectId, ".1.3.6.1.4.1.5528.100.20.10.2014")) { $os = "netbotz"; } > elseif(strstr($sysDescr, "endian")) { $os = "endian"; } > - > + elseif(preg_match("/Cisco Small Business/", $sysDescr)) { $os = "ciscosmblinux"; } > } > > } > > > > _______________________________________________ > observium-dev mailing list > observium-dev(a)observium.org > http://postman.memetic.org/cgi-bin/mailman/listinfo/observium-dev

1 0

Basic Communigate Pro support
by Matthias Cramer 15 Mar '12

15 Mar '12

Hi All I wrote a application plug-in to add basic support for the Communigate Pro Mail server suite. Communigates own snmp server needs to be run at port 10161 Hope is is of some interest and will be added to the repository. Regards Matthias -- Matthias Cramer / mc322-ripe Senior Network & Security Engineer iway AG Phone +41 43 500 1111 Badenerstrasse 569 Fax +41 44 271 3535 CH-8048 Zürich http://www.iway.ch/ GnuPG 1024D/2D208250 = DBC6 65B6 7083 1029 781E 3959 B62F DF1C 2D20 8250

1 0

Re: [Observium] [Observium-dev] FortiGate Support
by Rob J. Epping 14 Mar '12

14 Mar '12

Hi Matthias, On Tue, Feb 7, 2012 at 9:15 AM, Matthias Cramer <matthias.cramer(a)iway.ch> wrote: > Hi > > I'm new on this list, hope this is the right place. > I've improved the Fortigate Support a bit. Moved everything to the newest MIB and added memory and cpu support. > > Attached is a patch based on the current SVN tree. THNX 4 the patch! Your patch fixes version discovery and active sessions polling (at least these were not working for me) and adds a lot of other nice stuff. I hope this gets imported into SVN. > Regards > > Matthias -- GRTNX, RobJE

2 2

Graphic on Processor usage
by Ciro Iriarte 13 Mar '12

13 Mar '12

Hi, hope someone can clarify this to me. On the processor usage graph I see max usage reaching ~30% but on the info printed at the end of the graph it says ~67%. Am I missing something ?. Ref: http://imageshack.us/f/593/cpub.png/ Regards, -- Ciro Iriarte http://cyruspy.wordpress.com --

2 3

Last update, upgrading schema fails
by Ciro Iriarte 12 Mar '12

12 Mar '12

Hi, reporting a schema failure with rev2880: ------------------- wwwrun@cplanning:/opt/observium> php includes/sql-schema/update.php -d SQL[SELECT version FROM `dbSchema`] SQL[SELECT revision FROM `dbSchema`] -- Transitioning from old revision-based schema to database version system -- Updating database schema 006 -> 007 ...ALTER TABLE `dbSchema` DROP `revision`; You can't delete all columns with ALTER TABLE; use DROP TABLE instead done (1 errors). SQL[INSERT INTO `dbSchema` (`version`) VALUES ('007')] PHP Warning: QDB - Insert failed. in /opt/observium/includes/dbFacile.php on line 77 PHP Notice: Undefined index: insert_sec in /opt/observium/includes/dbFacile.php on line 86 PHP Notice: Undefined index: insert in /opt/observium/includes/dbFacile.php on line 87 PHP Notice: Undefined variable: id in /opt/observium/includes/dbFacile.php on line 89 -- Done ------------------- Regards, -- Ciro Iriarte http://cyruspy.wordpress.com --

3 5

blank screen browser
by norujames 11 Mar '12

11 Mar '12

Hello all my server worked well for few days. but now, when i go to the website, i have a blank screen, with following message on error_log: [Sun Mar 11 17:44:24 2012] [error] an unknown filter was not added: INCLUDES [Sun Mar 11 17:44:24 2012] [error] an unknown filter was not added: INCLUDES someone can help me to resolve the problem ? Thanks norujames

2 1

Supported devices
by norujames 09 Mar '12

09 Mar '12

Hello Someone can tell me if Observium support Redback ericsson devices ? btw, how to create or add new devices to supported ? Thanks norujames

3 4

discovery.php repeatedly trying to upgrade database
by David Brodbeck 08 Mar '12

08 Mar '12

I did an svn up recently, and am now at r2879. I ran discovery.php to update the database afterwards, and it went fine; however, now my discovery.php processes hang trying to install old database updates: $ ./discovery.php -h new Observium v0.12.2.2879 Discovery -- Updating database schema 000 -> 001 ... done (0 errors). 001 -> 002 ... The result is the discovery.php processes stack up and eventually exceed the database connection limit. Any ideas on why it persists on trying to update my already up-to-date database? -- David Brodbeck System Administrator, Linguistics University of Washington

2 2

Oracle perf data anyone?
by Ciro Iriarte 08 Mar '12

08 Mar '12

Hi!, anyone put together a script to collect performance data for Oracle DB ?. Regards, -- Ciro Iriarte http://cyruspy.wordpress.com --

2 3

Cisco ACE rservers graph does not display
by Zafar Pravaiz 08 Mar '12

08 Mar '12

Hi For my Cisco ACE i can not see Rserver graphs. Is there any clue why? Please see the attachment. Thanks

1 0