- observium - lists.observium.org

Wish list
by Terry Stone 29 Apr '21

29 Apr '21

Rather than re-invent the wheel writing a script does anyone have a script that can be run as a con job to backup rrd files, observium database and config.php to an external server. Thanks.

3 2

Removal Request
by David Ross 29 Apr '21

29 Apr '21

Hello! Please remove my email address from your email list; I am no longer on the team that uses Observium. Thank you! Respectfully, *David W. Ross, Sr.* Network Infrastructure Engineering Sr. Network Engineer 415.926.3483 - C david.ross(a)salesforce.com <https://smart.salesforce.com/sig/david.ross//us_mb/default/link.html>

2 1

Optimisations for huge lb_pools
by Pieter De Wit 29 Apr '21

29 Apr '21

Hi Guys, We have some pretty large lb_virtuals (12000 entries), lb_pools (180000 entries) tables. I found that the poller was struggling to keep up with this (understandable IMHO). What I did find was MySQL appeared to be the bottleneck so after some debugging I added the following indexes: create index lb_virtuals_idx_1 on lb_virtuals (device_id,virt_name); create index lb_pools_idx_1 on lb_pools (device_id,pool_name); create index lb_snatpools_idx_1 on lb_snatpools (device_id,snatpool_name); The middle one had the biggest impact, since that is the biggest table. Here is the polling result showing the difference: Time Duration 2021-04-29 17:05:02 56s 2021-04-29 17:00:02 4m 19s Hopefully this can help someone else if they have an issue like this (I hope not for your sanity :D ) or perhaps the devs can advise a better way of doing it :) P.S. - The issue was that polling kept running over each other and that cause it to spiral out of control, data gaps where getting bigger and bigger and MySQL was pinned at 250-300% CPU (4 core box this) Cheers, Pieter

1 0

Probes check_snmp_win
by Jacek.Dabrowski＠selgros.pl 26 Apr '21

26 Apr '21

How to use Probes for check_snmp_win, I can't find it in the documentation, maybe someone will tell [cid:image001.png@01D73852.510E3BC0] [cid:image002.png@01D73852.510E3BC0] Pozdrawiam Jacek Dąbrowski

3 5

New Port Alert Checks Not Working
by Andre Geißler 26 Apr '21

26 Apr '21

Hi all I configured a port alert check and set test condition to "ifOperStatus eq down" and asssociation ruleset to "Port ifAlias match *!!!*". I can see entities (276 ports) are matched correctly but are listed without the device the ports belong to. Status of alert never changes from "0 0 0 0 276" It seems associations works fine but checks aren't executed no matter which association and conditions I try. A much more complex port check I configured years ago is working fine, new ones aren't. I'm on 21.4.11258 Thanks a lot Andre

1 0

bug?
by Eric Sigurdsson 25 Apr '21

25 Apr '21

Is there a bug in the installation script? I tried to use the installation script for a fresh install on Debian 10.9. The script said I had Debian 9 and aborted. I made a fresh install av Debian and tried again. The same result. I have Debian 10.9 and the installation script says Debian 9. Is this a bug or what is the problem? ES

2 4

Add Device API - Option to provide poller id as parameter.
by Midhun Kandoth 20 Apr '21

20 Apr '21

Hi All, I am using observium apis to add devices to observium in a partitioned poller setup. But the current add device api (POST /api/v0/devices/) is not accepting poller_id as a parameter. Currently I am using MySQL Query to add devices to observium with poller_id. I could see that the API is in active development state. So it will be great if you can incorporate this request as well. Best, Midhun Kandoth

1 0

Genexis OLT/ONT Device issues
by Prasun Kumar Mitra (NOC) 20 Apr '21

20 Apr '21

Hi , We are using an OLT/ONT device Brand "Genexis" (http://www.genexis.co.in). Currently we have added Genexis- SOLT33-08P for testing. But it's *not working fully as we are not getting connected ONT information*. We have contacted the device vendor team. The *technical head of vender team is in CC " Mr. Satyam Bharati" *and they also want their devices to be compatible with observium*. *Anything needed from vendors can be made available by their team, In this regard we need support to add this device in observium so that we can monitor those devices. Please guide us what we need to do. Thanks & Regards, Prasun Mitra Alliance NOC Alliance Broadband Services Pvt. Ltd. 1st Floor, P 26/1, Dr Nani Gopal Roy Chowdhuri Ave, Entally Kolkata, West Bengal 700014 Contact No.- 1800 1200 300

2 1

Observium graphs not populated on Cisco
by Thodoris Lakiotis 16 Apr '21

16 Apr '21

*Hello there,* *We have just added a new 1002-X ASR with the following software.* *Cisco IOS Software [Amsterdam], ASR1000 Software (X86_64_LINUX_IOSD-UNIVERSALK9-M), Version 17.3.3* *The device is polled just fine, all Interfaces, included subifs indexed correctly and everything seems ok.* *But observium shows data on only on physical interfaces, but not to Subinterfaces.* *To be more specific, it graphs only physical interfaces, but not routed VLAN interfaces.* *Have you ever seen anything like this?* Thodoris

2 2

linux persitance SNMP indexes
by Edvinas Kairys 15 Apr '21

15 Apr '21

Hello, As i know there're no plans to workaround not persistent SNMP indexes 'feature' in Observium. But maybe there any linux snmp persistence workaround suitable for Observium, and its plugins (for example, weathermap) to leave the linux snmp if indexes unchanged after server reboot, etc ? Thank you

1 0

Changing some devices to only poll every 10 or 15 minutes temporariliy?
by Damien Gardner 12 Apr '21

12 Apr '21

Hi all, I have a bit of an oddball one, hoping it's not horrible to be able to do... We have a few devices which have recently started taking > 5 mins to complete polling. This is leaving large gaps in our logs, and is also effecting discovery (as the polling of the devices are piling up on top of themselves and pushing load on those devices up heavily). For now I've just turned off polling on those devices, but that's not ideal either.. Is there a way to be able to just poll those manually at say 10 or 15 minute intervals? I shoved them into a group and excluded that group from our polls - and then ran poller.php -h deviceid on one device in cron every 15 mins to see how it would go - but we just get no graphs.. Also as a test, tried using rrdtool tune --step 900 to change the step size to 15 mins, but also no go (didn't really entirely expect it to..) Is there a not-horrible (or if it has to be, I'm ok with horrible in the short-term until the vendor can figure out what on earth is going on..) way to get these being polled on a 15-minute interval and also going into rrd's? (We're on the current paid subscription version, if that helps) Thanks, Damien [https://info.serversaustralia.com.au/hubfs/Brand-2018/logo-font-sau.gif] Damien Gardner Jnr Senior Dev Ops P: (02) 8115 8812 4 Amy Close, Wyong, NSW 2259 Need assistance? We are here 24/7 +61 2 8115 8888 [Sent from Front]

5 7

Unable to delete alert checkers
by Luis Londoño 26 Mar '21

26 Mar '21

Cant delete an alert checker. When I click on Delete the confirmation prompt comes up and the checkbox is already selected but the delete alert is disabled. Unchecking the box enabled the button but clicking it doesn't delete the alert. We are on 21.3.11160 (24th March 2021) [cid:image001.png@01D7216C.5095D420] Did find in the HTML to enable the button when the checkbox is pressed was to remove the "disabled=1" [cid:image002.png@01D7216C.8C292410]

4 4

[PATCH] Support kamcmd and kamctl in kamailio local script
by Kevin Riahi 19 Mar '21

19 Mar '21

Adam, What is the outlook on deploying this patch? https://jira.observium.org/browse/OBS-3431 Thank you Kevin Riahi

1 0

Fix for small issue in poller-wrapper.py
by Damien Gardner 16 Mar '21

16 Mar '21

Hi Team, Been pulling my hair out for a large chunk of the day trying to sort out why our Huawei devices stopped polling after I split out polling run into two lots (one excluding the huawei devices group, one including it) Seems that when you enable debug with poller-wrapper.py<http://poller-wrapper.py/> (-d), it's passing a string to substring.check_call rather than a file, so it throws an exception and doesn't run the poller. The diff below is an example that seems to fix this issue (though I'm a php dev, not python, so someone who knows python might have a nicer way to do it..) root@observium:/opt/observium# svn diff poller-wrapper.py<http://poller-wrapper.py> Index: poller-wrapper.py<http://poller-wrapper.py> =================================================================== --- poller-wrapper.py<http://poller-wrapper.py> (revision 11124) +++ poller-wrapper.py<http://poller-wrapper.py> (working copy) @@ -837,7 +837,7 @@ command_args.extend(command_list) command_args.append(device_id) if debug: - command_out = temp_path + '/observium_' + process + '_' + str(device_id) + '.debug' + command_out = open(temp_path + '/observium_' + process + '_' + str(device_id) + '.debug', 'w') #print(command_args) #debug subprocess.check_call(map(str, command_args), stdout=command_out, stderr=subprocess.STDOUT) (This doesn't fix the group being polled but nothing appearing in the DB or RRDs, but I'm still trying to figure out what's going on there, I'm sure it's something borked in our DB or something..) Thanks, DG [https://info.serversaustralia.com.au/hubfs/Brand-2018/logo-font-sau.gif] Damien Gardner Jnr Senior Dev Ops P: (02) 8115 8812 4 Amy Close, Wyong, NSW 2259 Need assistance? We are here 24/7 +61 2 8115 8888 [Sent from Front]

2 1

Limiting eventlog collection
by Michael Kelly 15 Mar '21

15 Mar '21

Hi, is there any way I can fine tune the collection of Informational/Debugging events? We have rather a lot of them. mysql> select count(*) from eventlog where severity in (6,7) and timestamp > '2021-03'; +----------+ | count(*) | +----------+ | 18500339 | +----------+ 1 row in set, 2 warnings (35.82 sec) Regards, Michael.

2 2

No graphs for 64bit network ports on arm
by Simon Smith 08 Mar '21

08 Mar '21

Hi All, Ive spotted a few weird issue with my new setup running on arm? 1. The first 4 ports on our TPLink switches are being detected as 64Bit and then the rest of the ports are 32Bit ? 2. the 64bit graphs are showing 0 for everything, even though the output from the command line shows stats? (See https://pastebin.com/raw/qP4T1Fa9 <https://pastebin.com/raw/qP4T1Fa9>) 3. The graphs are being generated so the RRDs are fine, but the graphs are blank? Regards Simon

2 10

Merge rrds
by Simon Smith 08 Mar '21

08 Mar '21

Hi All, Im just wondering how to merge two rrds together? I have moved our hosting from locally to aws I decided to start a fresh rather than coping the DB and RRDs over (personal reasons) So the id numbers of hosts are different, including dns etc I would like to preserve the rrd graphs if thats possible from the old install Regards Simon - Hestor Ltd

2 2

Problem with the update
by Mario Pascal Necker 06 Mar '21

06 Mar '21

Hello I become this error Message from the update. [cid:image001.png@01D7127F.C5982CB0] Thx mario -- ✓ Geprüft von IKARUS anti.virus http://www.ikarussecurity.com

1 0

what version of php and maria can I use?
by Tony Guadagno 06 Mar '21

06 Mar '21

Hi, I did look at the recommendations and it says 7.2+ so, can I use 7.4? what about 8? Same question for maria, looks like you like 10.3, can I use more current versions? Thanks Tony

3 2

Re: [Observium] what version of php and maria can I use?
by Tony Guadagno 05 Mar '21

05 Mar '21

Ok, great, what about Maria, is there an upper limit? On Mar 5, 2021 2:33 PM, "Joelly, Alexander via observium" <observium(a)observium.org> wrote: Observium on PHP 7.4 works fine - PHP 8 is not supported yet. From: observium <observium-bounces(a)observium.org> On Behalf Of Tony Guadagno via observium Sent: Friday, 5 March 2021 19:50 To: Adam Armstrong via observium <observium(a)observium.org> Cc: Tony Guadagno <tonyg(a)guadagno.org> Subject: [Observium] what version of php and maria can I use? WARNING: This e-mail originated from outside of Magna. Be cautious with links and attachments. ________________________________ Hi, I did look at the recommendations and it says 7.2+ so, can I use 7.4? what about 8? Same question for maria, looks like you like 10.3, can I use more current versions? Thanks Tony

1 0

Need to Add Genexis OLT/ONT Device
by Prasun Kumar Mitra (NOC) 05 Mar '21

05 Mar '21

Hi , We are using an OLT/ONT device Brand "Genexis" (http://www.genexis.co.in). Currently we have added Genexis- SOLT33-08P for testing. But it's not working fully as we are not getting connected ONT information. We have contacted the device vendor. They have provided us MIB of the devices(Link Provided below) but we are unable to make it work. In this regard we need support to add this device so that we can monitor those devices. Please let us know what we need to do . Link : Genexis MIB Link <https://drive.google.com/file/d/1rd7F9cl9sRGAcfAp5ydz3jxGJdHpeZ-f/view?usp=…> Thanks & Regards, Prasun Mitra Alliance NOC Alliance Broadband Services Pvt. Ltd. 1st Floor, P 26/1, Dr Nani Gopal Roy Chowdhuri Ave, Entally Kolkata, West Bengal 700014 Contact No.- 1800 1200 300

1 0

Syslog Integration
by Shawn L 03 Mar '21

03 Mar '21

We recently implemented syslog integration. One thing that we miss however is having the logs in the syslog file. It's great to see them in Observium, but there are times where it's easier to grep the syslog file itself to see what's going on. Is there a way to keep the log entries in the syslog files, and still deliver copies to Observium? Thanks Shawn

2 1

Observium Installation on Raspberry Pi 4 (Raspbian GNU/Linux 10 (buster))
by Polaris Networks Support 03 Mar '21

03 Mar '21

Hi, I'm having trouble installing Observium, from the script, on a Raspberry Pi 4 running: root@raspberrypi:~# lsb_release -a No LSB modules are available. Distributor ID: Raspbian Description: Raspbian GNU/Linux 10 (buster) Release: 10 Codename: buster Does anyone have any ideas on what could be wrong, based on the output below please? root@raspberrypi:~# wget http://www.observium.org/observium_installscript.sh --2021-03-03 11:31:53-- http://www.observium.org/observium_installscript.sh Resolving www.observium.org (www.observium.org)... 185.94.140.56 Connecting to www.observium.org (www.observium.org)|185.94.140.56|:80... connected. HTTP request sent, awaiting response... 301 Moved Permanently Location: https://www.observium.org/observium_installscript.sh [following] --2021-03-03 11:31:53-- https://www.observium.org/observium_installscript.sh Connecting to www.observium.org (www.observium.org)|185.94.140.56|:443... connected. HTTP request sent, awaiting response... 200 OK Length: 17916 (17K) [text/x-sh] Saving to: ‘observium_installscript.sh’ observium_installsc 100%[===================>] 17.50K --.-KB/s in 0.002s 2021-03-03 11:31:53 (10.1 MB/s) - ‘observium_installscript.sh’ saved [17916/17916] root@raspberrypi:~# chmod +x observium_installscript.sh root@raspberrypi:~# ./observium_installscript.sh WARNING: Apache default config found, this script will overwrite that config and your current config will be lost Continue? 1) Yes 2) No #? 1 Apache config will be overwritten... ___ _ _ / _ \| |__ ___ ___ _ ____ _(_)_ _ _ __ ___ | | | | '_ \/ __|/ _ \ '__\ \ / / | | | | '_ ` _ \ | |_| | |_) \__ \ __/ | \ V /| | |_| | | | | | | \___/|_.__/|___/\___|_| \_/ |_|\__,_|_| |_| |_| Welcome to Observium automatic installscript Please choose which verision of Observium you would like to install 1. Observium Community Edition 2. Observium Pro Edition stable (requires account at https://www.observium.org/subs/) 3. Observium Pro Edition rolling (requires account at https://www.observium.org/subs/) 4. Install the UNIX-Agent 5. Install the SNMPD (snmpd-config will be overwritten) (1-5):1you choose 1 dpkg-query: no packages found matching mysql-server dpkg-query: no packages found matching mariadb-server [*] No MySQL server detected in this server, installing MySQL... Choose a MySQL root password [*] Beginning package installtion, this might take up to 30min [*] We are on Debian 8.x, installing packages... E: Unable to locate package libapache2-mod-php7.0 E: Couldn't find any package by glob 'libapache2-mod-php7.0' E: Couldn't find any package by regex 'libapache2-mod-php7.0' E: Unable to locate package php7.0-cli E: Couldn't find any package by glob 'php7.0-cli' E: Couldn't find any package by regex 'php7.0-cli' E: Unable to locate package php7.0-mysql E: Couldn't find any package by glob 'php7.0-mysql' E: Couldn't find any package by regex 'php7.0-mysql' E: Unable to locate package php7.0-mysqli E: Couldn't find any package by glob 'php7.0-mysqli' E: Couldn't find any package by regex 'php7.0-mysqli' E: Unable to locate package php7.0-gd E: Couldn't find any package by glob 'php7.0-gd' E: Couldn't find any package by regex 'php7.0-gd' E: Unable to locate package php7.0-mcrypt E: Couldn't find any package by glob 'php7.0-mcrypt' E: Couldn't find any package by regex 'php7.0-mcrypt' E: Unable to locate package php7.0-json E: Couldn't find any package by glob 'php7.0-json' E: Couldn't find any package by regex 'php7.0-json' E: Package 'mysql-server' has no installation candidate E: Package 'mysql-client' has no installation candidate root@raspberrypi:~# Thank you, Jon Bennell *Polaris Networks Support* *T: *+44 203 397 3535 *W: *www.polarisnetworks.co.uk *The e-mail and any attachments to it are confidential. Unless you are the intended recipient, you may not use, copy or disclose either the message or any information contained in the message. If you are not the intended recipient, you should delete this e-mail and notify the sender immediately. * *Any views or opinions expressed in this e-mail are those of the sender only, unless otherwise stated. All copyright in any Polaris Networks Limited material in this e-mail is reserved.* *All e-mails, incoming and outgoing, may be recorded by Polaris Networks Limited and monitored for legitimate business purposes.* *Polaris Networks Limited exclude all liability for any loss or damage arising or resulting from the receipt, use or transmission of this e-mail to the fullest extent permitted by law.*

3 9

Disable netstats for device type
by Robert Williams 03 Mar '21

03 Mar '21

Hi! We have a large number of 'Geist' PDU devices, each of which takes around 20-30 seconds to complete the 'netstats' poller element (due to the nasty tiny-brain device, not Observium): There is no data of value to us collected from this, so I'd like to just disable netstat collection for all current and future Geist devices. Is there a way to do this which doesn't involve clicking on each one and disabling that module manually? [cid:image001.png@01D70F52.9DBE2C60] I've trawled the DB as best I can to try to see where I can do this, but unable to identify where module enable/disablement is done. Closest I found is within the devices table, there is device_state and the netstats element is encoded in there in a way I cannot grasp unfortunately. Devices can be easily matched with: select * from devices where vendor like "geist" - so I'm hoping I can make a change globally somehow? Cheers! Robert Williams Custodian Data Centres https://www.CustodianDC.com

3 7

Backup options for the MySQL database
by Michael Kelly 02 Mar '21

02 Mar '21

Hi Everybody, I recently started a new role at a company that uses Observium to monitor a fairly large estate. Observium (Professional edition) was originally installed on an EC2 instance running Debian 8 and MySQL 5.5 by someone who has long since departed the company. My task is to bring it all up to date and document it. I've created a new instance running Ubuntu 20.04 LTS and MySQL 8.0.23 and testing the migration process hasn't thrown up any problems. One of the things my predecessor didn't do was to set up any backup regime for the database. As it happens, /var/lib/mysql is a logical volume and I've been looking at using lvm snapshots as part of a backup process. The basic idea would be to: Connect to the mysql daemon and issue a 'FLUSH TABLES WITH READ LOCK' command. Create the LVM snapshot. Connect to the daemon and issue a 'UNLOCK TABLES' command. Do something with the snapshot. My questions are: Is this a good idea? Will it give me a consistent backup? Is there a better way? Thanks in advance, Michael.

3 2

Port usage monitoring
by Simon Smith 24 Feb '21

24 Feb '21

Hi All, I wondered if anybody has been able to setup alerts for port usage? I would like to monitor a machines network port, and if it goes above say 20GB worth of upload in like 3 weeks then alert me? I think I might need the billing part of observium setup for this but im not sure? Kindest Regards Simon - Hestor Ltd

2 3

Graphs not displaying recent traffic
by Luis Londoño 23 Feb '21

23 Feb '21

Hello, For some reason, none of my graphs are showing any recent information. The last graphs being shown are from a few weeks ago. This is happening on all my devices I have in Observium. I just updated to r 21.2.11038 and still seeing the same thing. I am on rrdtool v1.7.2 [cid:image001.jpg@01D709C5.16A61770] How do I get my graphs to come back?

2 1

jquery.js
by Mark Rowlands 23 Feb '21

23 Feb '21

/opt/observium/html/js/Jsquery-min.js /*! jQuery v2.2.4 | (c) jQuery Foundation | jquery.org/license */ Any chance you could bump this to 3.5 ? , The security people are complaining about EOL unsupported software. ☹ ( i.e https://snyk.io/vuln/SNYK-JS-JQUERY-565129 )

3 4

Observium + gradaba
by Luis Olavarrieta 20 Feb '21

20 Feb '21

Has anyone interfaced observium with ágrafa a to create a dashboard? Which tables should be read for it? Enviado desde mi iPhone

1 0

Interface utilization metrics
by Kania, Piotr 20 Feb '21

20 Feb '21

Hello Everyone, I want to pull interface utilization metrics from mysql DB and make it a daily report. Got bunch devices I am interested in, each of them has got few interfaces I would like to get metrics for. Graphs are showing all the info I would like to get from DB like max, min and avg values for In and Out octets. Where in DB I can find historical data for device XXX, interface YYY, date ZZZ. So far I was able to run something like below, but that doesn't give me any option to select historical data. I must say that I was browsing through whole DB table by table and I couldn't find anything related to previous dates. My query: select dev.sysName, dev.device_id, prt.port_id, prt.ifSpeed, prt.ifInOctets, prt.ifInOctets_rate, prt.ifInOctets_perc, prt.ifOutOctets, prt.ifOutOctets_rate, prt.ifOutOctets_perc from observium.devices as dev inner join observium.ports as prt on dev.device_id = prt.device_id where dev.sysName = 'XXX' and prt.port_label = 'Eth2' Any help hips, guides are more than appreciated. Regards, Piotr Kania CREDIT SUISSE (POLAND) SP. Z O.O. Credit Suisse CoE OPS Wroclaw | Monitoring & Instrumentation Solutions, MBHJ 711 Atrium 2 | Warsaw 00-849 | EMEA Phone +48 22 359 8668 piotr.kania(a)credit-suisse.com<mailto:piotr.kania@credit-suisse.com> | www.credit-suisse.com<http://www.credit-suisse.com> =============================================================================== Please access the attached hyperlink for an important electronic communications disclaimer: http://www.credit-suisse.com/legal/en/disclaimer_email_ib.html ===============================================================================

3 2

OSPF discovery & CISCO-VPC-MIB
by Marian Rychtecky 18 Feb '21

18 Feb '21

Hi Adam and all Observium enthusiasts, I have two questions. First - is there any trick to find out why OSPF discovery is working on one router and not the other? I have the global setting enabled, and the OSPF module is enabled too, but only 1 router is being discovered as OSPF enabled. Am I missing something? Second - any plans integrating CISCO-VPC-MIB for vPC pairs of Cisco Nexus switches? Thank you very much for any response, Marian -- Marian Rychtecký mr(a)nix.cz Phone +420 724 397 441 NIX.CZ z.s.p.o. Americká 23, Praha 2 130 52 Czech Republic http://www.nix.cz

1 0

Need Explain about Legend Details on DiskIO Graph
by Aulia Rahman 11 Feb '21

11 Feb '21

Dear All, Can someone explain me the details of legend on Disk IO page refers to ? Health > Disk I/O: First graph with legend bps "<" & ">" (blue and green graph) What does k, M, none suffix mean ? Second graph with legend Operations/sec "Rx" & "Tx" (red & orange graph) What does m, u, none suffix mean ?

2 1

best practices regarding interface switching and historical data
by Arne Van Theemsche 10 Feb '21

10 Feb '21

Hi, I was wondering how you guys tackle the problem of changing the port of (e.g. your transit uplink) to another physical port & historical data. Since rrd's are stored under "port-<snmpid>" format, this event causes you by default to loose your historical data. Or even worse, you have to change your routing engine with a more recent version, and after replacing it seems all your snmp id's are changed. this is certainly of importance for our interfaces which have a label that automatically creates aggregates graphs. How I do this until now is copying the rrd file to the new location, but this seems so... dirty kind regards Arene

4 3

emails alerts stopped working
by Pieter Meyer 09 Feb '21

09 Feb '21

Hi, Seems Email alerts stopped working, we are currently using Observium 21.2.10990 email.inc.php ./test_alert.php -c 3 Observium 21.2.10990 Test Alert Notification o Notifying [email] Default alert email: {"email":"cvtvoice(a)convergedgroup.net"}PHP Parse error: syntax error, unexpected '=' in /opt/observium/includes/alerting/email.inc.php on line 131 Regards Pieter Meyer Converged Group | Licensed ISP 0258/IECNS/JAN/09 75 Witkoppen Rd, North Riding, Gauteng, 2162 Office: +27 10 591 4600 | Mobile: +27 83 233 6614

3 5

wrong values in billing module
by Volker Lieder 22 Jan '21

22 Jan '21

Hi, we are using the Pro/Subscription and use the billing module. A customer of us notices us, that the billing information is wrong. I checked information from billing module for december for the customer (95/5 374Mbit). Also i check 95/5 of the port directly i get a value of 204Mbit, 95/5 How is this difference possible? Any other persons here with same problems? Best regards, Volker

1 0

Device & bad_if_regexp
by Arrigo 19 Jan '21

19 Jan '21

Hi All. Is there a way to associate a device in /bad_if_regexp /parameter in /config.php /file? I mean: I want to exclude "GigabitEthernet0/3/4.*" subinterfaces on a specific device, but the same interface is also on other devices. My actual config.php setup is: $config['bad_if_regexp'][] = "/GigabitEthernet0\/3\/4\.[123]+/"; $config['bad_if_regexp'][] = "/GigabitEthernet0\/3\/4\.[456789][0-9]{0,2}$/"; Thanks, Arrigo.

2 1

Ubuntu update problem.
by Peltokangas Mikko 16 Jan '21

16 Jan '21

Hello, I updated my Ubuntu from 18.04 to 20.04 and my Observium wont update devices events anymore. Services are up, but where I should search problem? I have latest updates from Observium (20.21.10924) -- Terveisin, Mikko Peltokangas, järjestelmäasiantuntija Alavuden kaupunki gsm:+358-44-516 3120 (myös Whatsapp) email:mikko.peltokangas@alavus.fi

3 5

Arista switches per-VLAN traffic stats?
by Adam Thompson 15 Jan '21

15 Jan '21

I observe (pun not intended) that on our Arista switches, unlike the Cisco NX9ks we run, Observium isn’t able to collect per-VLAN traffic stats. This is kind of a problem for us… Arista’s willing to help diagnose, but wants to know what MIB trees are being polled to gather this info. Can anyone tell me what MIBs / OID trees Observium is looking for? Thanks, -Adam Adam Thompson Consultant, Infrastructure Services [[MERLIN LOGO]]<https://www.merlin.mb.ca/> 100 - 135 Innovation Drive Winnipeg, MB, R3T 6A8 (204) 977-6824 or 1-800-430-6404 (MB only) athompson(a)merlin.mb.ca<mailto:athompson@merlin.mb.ca> www.merlin.mb.ca<http://www.merlin.mb.ca/>

2 2

PHP error after update
by luca＠sasdelli.it 14 Jan '21

14 Jan '21

PHP Parse error: syntax error, unexpected '=' in /opt/observium/includes/common.inc.php on line 540 .and blank web page with HTTP ERROR 500 Any hint? Thanks Luca

4 5

mysql poller times increased 2x after Maria DB upgrade from 5.x to 10.3
by Edvinas Kairys 14 Jan '21

14 Jan '21

hello, Mysql poller times increased 2x after Maria DB upgrade from 5.x to 10.3 [image: image.png] I dont know if this is supposed to be or not ? dunno if i 'feel' any slowness, but i want to ask for your info. Thanks for any input

3 7

local db vs remote
by Edvinas Kairys 11 Jan '21

11 Jan '21

Hello, I see that Observium supports remote database, recently when i was thinking how to autobackup database, i came accross to the idea that i could use remote db functionality to send db data to some centralized location. Has anybode tried to use remote db for Observium ? Thanks

3 2

Probes
by Jacek.Dabrowski＠selgros.pl 08 Jan '21

08 Jan '21

Hello, Is it possible to use login data when creating probes? Applies to websites that require logging in. [cid:image001.png@01D6E5B0.7C220F20] Regards Jacek Dąbrowski

2 2

Please remove me thank you
by Davide Viganó 07 Jan '21

07 Jan '21

Davide Viganó Centro Internazionale Loppiano Servizio IT M +39 348 3551790 E davide(a)loppiano.it

1 0

upgrading Observium | python part
by Edvinas Kairys 05 Jan '21

05 Jan '21

Hello, I want to renew Observium system and upgrade old dependencies, like current Python 2.7.5. Do i understand correctly that i can download Python3.6 and start to use it instead that old 2.7.5 Python ?

2 1

Question on Observium GUI
by Martin 23 Dec '20

23 Dec '20

Hello Observium experts, Is there a way to 'acknowledge' an issue which produces a status box (old style) to make this status box to disappear from my dashboard? For example, I have a number of BGP sessions on hot-standby devices which are 'normally down' until the primary device dies. I do not need/want to see the down state of these BGP sessions. Obviously other BGP issues from these or other devices should still be reported. Best regards, Martin

2 1

creating alert when port status change
by Luis Olavarrieta 22 Dec '20

22 Dec '20

Adam / team: How do you create a rule when a port changes it status? I need to send an email when a port (different than the WAN) changes it status from up to down.

3 3

Updating observium system via yum update
by Edvinas Kairys 22 Dec '20

22 Dec '20

Hello, it's been a while I was upgrading the Observium dependencies. Currently we're suing OLD Centos version: CentOS Linux release 7.3.1611 (Core) [image: image.png] What do you think, is it safe to update system via yum update? It would upgrade Centos 7.3 to 7.x and should upgrade Python, Maria DB (from 5.5.56 to 5.5.68) ant other Observium dependencies. After this base update, i would try to manually update MariaDB to 10.x and Python, if yum update will be insufficient. My concern is to not corrupt the system. Could you give some recommendations or i'm too careful and everything should be fine with yum update. ? Thank you:)

2 1

Call to undefined function is_valid_serial()
by Simon Smith 20 Dec '20

20 Dec '20

Hi All, Im having an issue where the poller.php is erroring out and crashing when talking to my linux servers CMD[/usr/bin/snmpget -v2c -c *** -Pud -OQUv -m UCD-SNMP-MIB -M /opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp 'udp':'voip.rbs':'161' .1.3.6.1.4.1.2021.7890.4.3.1.1.6.115.101.1 14.105.97.108] CMD EXITCODE[0] CMD RUNTIME[0.0331s] STDOUT[ "To Be Filled By O.E.M." ] SNMP STATUS[TRUE] PHP Fatal error: Uncaught Error: Call to undefined function is_valid_serial() in /opt/observium/includes/polling/os/unix.inc.php:384 Stack trace: #0 /opt/observium/includes/polling/os.inc.php(239): include() #1 /opt/observium/includes/polling/functions.inc.php(336): include('/opt/observium/...') #2 /opt/observium/poller.php(187): poll_device(Array, Array) #3 {main} thrown in /opt/observium/includes/polling/os/unix.inc.php on line 384 Fatal error: Uncaught Error: Call to undefined function is_valid_serial() in /opt/observium/includes/polling/os/unix.inc.php:384 Stack trace: #0 /opt/observium/includes/polling/os.inc.php(239): include() #1 /opt/observium/includes/polling/functions.inc.php(336): include('/opt/observium/...') #2 /opt/observium/poller.php(187): poll_device(Array, Array) #3 {main} thrown in /opt/observium/includes/polling/os/unix.inc.php on line 384 SVN latest revision 10905 Any ideas? Kindest regards Simon

2 3

Re: [Observium] Smokeping graphs post migration
by Joey Stanford 20 Dec '20

20 Dec '20

>> It seems this bit of code isn’t being triggered at all, which suggests none of your filenames have a tilde in them? > > correct As a side note, smokeping-generate vs my actual targets appears to differ. # jstanford @ observium in ~ [14:44:02] $ diff smokeping-obs-script.txt smokeping-actual-targert.txt 174,179d173 < ++ radio-cedarwood_fremont_rmham < host = radio-cedarwood.fremont.rmham < < ++ radio-cedarwood_pueblo_rmham < host = radio-cedarwood.pueblo.rmham < 582,584d575 < ++ router_n5zgt_qth < host = router.n5zgt.qth < 737,739d727 < < ++ wifi_ac0kq_rmham < host = wifi.ac0kq.rmham

2 5

Smokeping graphs post migration
by Joey Stanford 19 Dec '20

19 Dec '20

Howdy, I need some help pointing me in the right direction for troubleshooting. I migrated Observium from Ubuntu to Debian and life is good except for smokeping. I have no graphs but… * smokeping is installed * smokeping and observium’s config.php are using the same configuration as the old server * going to [host]cgi-bin/smokeping.cgi shows me all the graphs and they are up to date * going to the tech support page shows me that observium finds the graphs e.g. - Found file ending in ".rrd": router_thorodin_rmham.rrd - Determined to be a local file, for target router_thorodin_rmham - After replacing configured split_char _ by . target is router.thorodin.rmham so at this point I know smokeping is working, the graphs have the right perms to displayed (currently smokeping:observium), and observium can see the rrd file. Unfortunately going to the page I get the dreaded “Error drawing graph”. At the bottom of the smokeping section in tech support I see two items. One is an error for no outgoing latency graph. Any ideas on what else I could look at? RRD for incoming latency found. RRD for outgoing latency not found.

2 1