- observium - lists.observium.org

SNMP + Syslog Question
by Randy Schultz 15 Jul '20

15 Jul '20

I am interested in merging SNMP + Syslog data from the firewalls (SonicWALL) I manage. With this data, I would like to accomplish two things... 1. Monitor for security events and send alerts if / when appropriate 2. Generate and send regulatory (PCI) compliance reports...this includes performance stats such as Up Time / Down Time as well as security stats (e.g. Intrusions blocked / detected)...these stats would ideally be displayed in some form of chart At present, SNMP data is being collected by Observium and Syslog data is being collected by Graylog. The question is where would it be best to merge the data so as to accomplish the goals outlined above. Graylog has the ability to search its data and generate report widgets (i.e. tables / charts) which in turn can be placed on a Dashboard. If I take this approach I would need to send Observium's SNMP data to Graylog but I've not been able to figure out how to do so. Observium has the ability to ingest Syslog data and alert on it but it's unclear on how I could use it to generate tables / charts for reporting purposes. I would appreciate any thoughts / recommendations on either of the options listed here. -- Randy Schultz

2 1

poll ports without VLAN information
by Henrik Aarfeldt 15 Jul '20

15 Jul '20

Hi there, As I remember, when polling a port it will also get VLAN information. Is there a way to don't get VLAN information ? VLAN is disabled in DiscoveryModules and PortsPoll Module. Reason: We have some units with very few interfaces, but a large amount of VLANs. This makes polls take too long time (+999seconds) TIA. -- Med venlig hilsen | Best regards | Mit freundlichen Grüßen | Cordialement | आपकी ईमानदारी से Henrik Aarfeldt Drift > Drift > Overvågning Overvågning + SårbarhedsKortlægning + SvartidsMålinger + NetværksKvalitetsMålinger. Mobil: +45 2494 8281 Mail: Henrik.Aarfeldt(a)RegionH.dk Region Hovedstaden Center for IT, Medico & Telefoni (CIMT) Borgervænget 7, 3. sal 2100 København Ø Ferie uge 33+34+35 2020. ________________________________ Region Hovedstaden anvender de personoplysninger, du giver os i forbindelse med din henvendelse. Du kan læse mere om formålet med anvendelsen samt dine rettigheder på vores hjemmeside: www.regionh.dk/persondatapolitik

2 1

Email Notifications - Only send 1 email out in 24 hours
by Luis Londoño 15 Jul '20

15 Jul '20

I see for the alert notifications there is an option to delay the email alert by a custom time frame but is their somewhere or this something that is being planned to be implemented to where it will only send out 1 email alert within a certain time period lets say 24 hours?

2 1

test
by adama＠observium.com 15 Jul '20

15 Jul '20

Test 😊

1 0

Dashboard: add don't work anymore
by walter＠onda.ch 07 Jul '20

07 Jul '20

Hello List recently some mails are going to my spam folder so I apologize if this question was already made. since last major update I cannot assign some graph to the dashboard anymore 20.7.10549 (3rd July 2020) I see the arrow right to the dashboard but if i move on it nothing happens, cannot choose a graph. I tried diffrent browser, delete also the cache. Regards Walter

1 0

Testing email delivery
by Ahmed Rahal 06 Jul '20

06 Jul '20

HI, It's been 2 messages that I sent that do not trigger the autoreply from Jira Service Desk. I am assuming it's automated. Is this coming through ? Ahmed. -- Ahmed Rahal Administrateur de Systèmes / Systems Administrator *Fibrenoire* - www.fibrenoire.ca A: 550 , avenue Beaumont, bureau 320, Montréal (Québec) H3N 1V1 arahal(a)fibrenoire.ca Twitter: @fibrenoire

1 0

how to show number of clients on mikrotik wifi
by Andi Felani 29 Jun '20

29 Jun '20

all, how to show number of clients on mikrotik wifi? this is possible? regards,

1 0

Probes: documentation
by Torstein Eide 24 Jun '20

24 Jun '20

Hi Where can I find documentation on probes? I have looked through https://docs.observium.org and is only able to find info for alerts "/entities/#probes" -- Torstein Eide Torsteine(a)gmail.com

1 0

Sensor "friendly" name in alerts?
by Ryan, Spencer J. 18 Jun '20

18 Jun '20

We've got a generic alert set up for "status_event equals alert" however in the alert email there isn't anything that has the decoded/friendly text for the sensor in question. For example a UPS switches to battery power, the Entity is "Output Status" and the graph in the email shows the status going from "2" to "3" but that isn't useful. If I look at the device in the webUI it does show that "Output status" is "onBattery". It would be incredibly useful if that information was available in the alert. ________________________________ Spencer J. Ryan | Manager, Technology and Infrastructure Miller Canfield T +1.313.496.7979 ________________________________

1 0

Add/edit users menu returns main dashboard
by Chris Ajello 17 Jun '20

17 Jun '20

Hello everyone – I’ve got an issue where the web GUI returns the main dashboard whenever trying to open the add or edit user pages. Adding from the command line works. Just not the GUI. I don’t see any obvious errors in Apache logs or Observium logs. How do I get starting solving this problem? -Chris Ajello

1 0

CDP Neighbor detection for devices with names longer than 40 characters
by Pisano, Anthony D. 12 Jun '20

12 Jun '20

Hello, Due to campus naming conventions I have run into several switches with names longer than 40 characters. Normal operation and monitoring is not effected, however Observium does not recognize the neighbor. I believe this is due to it wanting an exact name match, and since the name in observium may be 42 characters, it does not match to the truncated 40 character CDP name. Is there a way we can either manually define a neighbor connection, or have the algorithms ignore any characters above the 40 limit? Perhaps by checking for IP address matching as well? Thank You Anthony Pisano | Network Design Engineer | IMSS anthony.pisano(a)caltech.edu<mailto:anthony.pisano@caltech.edu> | (626) 395-4255<tel:(626)%20395-4255> | Caltech | caltech.edu<http://caltech.edu/>

2 1

Windows Server - No Ram
by Stuart Dyer 11 Jun '20

11 Jun '20

Hi Everyone, Have a windows server that no longer has a memory graph, all I can see in the events is this, how can the memory get removed ? [cid:image001.png@01D63F30.4210B6A0] Regards, Stuart Dyer IT Administrator Phone: +61 2 8020 2063 | E-mail: stuart.dyer(a)innovit.com<mailto:stuart.dyer@innovit.com> [innovit-logo (002) trans 2018] Bringing quality to Master Data 161 Castlereagh Street, Level 28 Sydney NSW 2000 Australia<https://goo.gl/maps/DGW9Ce65rhP2> Tel: +612 8020 2000 Fax: +612 8020 2099 Web: www.innovit.com<http://www.innovit.com/> Australasia | North America | Europe Follow us on LinkedIn<https://www.linkedin.com/company/innovit-australia-pty-ltd?trk=public_profi…> This electronic mail is solely for the use of the addressee and may contain information, which is confidential or privileged. If you receive this electronic mail in error, please delete it from your system immediately and notify the sender by electronic mail or using any of the following contact details.

2 2

Issues with Vivotek Cameras
by Dana Bostic 10 Jun '20

10 Jun '20

When I add a Vivotek camera to Observium, works great for one, but when I try to add another one, the System name is the same (in this case h.264 mega-pixel network camera) and it will not add. The name of the device is different, what Observium "pulls in thru SNMP" is the same. Already got device with SNMP-read sysName (h.264 mega-pixel network camera) and 'snmpEngineID' = 80005BA9017F000001 (jq-office-lobby-cam01.bcp.cat.com). I see in JIRA that we are supposed to be able to add more devices with the same system name, but this is not working for the version I have of Observium 20.4.10371 (stable). It is my "belief" that Vivotek is reporting back it's system name to SNMP incorrectly. I do not really "care" if the System Name is wrong, but I cannot add another camera at all. This is what is in the camera configuration and I don't see any other location for a host name. [cid:image002.png@01D63DA5.852215B0] If I do an snmpwalk on the device: SNMPv2-MIB::sysName.0 = STRING: H.264 Mega-Pixel Network Camera Observium is pulling what the camera is giving .... So is there a way to change this in the database or a way to say add it anyway? Regards, [Telescope Separator] Dana Bostic Technology Specialist Caterpillar Inc. 954 NC 42 East, Clayton, NC 27527 email: bostic_dana_r(a)cat.com<mailto:bostic_dana_r@cat.com> | phone: 919-550-1260 Caterpillar: Confidential Green

4 5

Graphs and date preset
by Christian Eriksson 10 Jun '20

10 Jun '20

Hi, When selecting all devices and sorting by device-group (URL =/device/group), there is an option to select a specific graph and use a date preset. That is all great, but the value does not show When selecting the group using /group/group_id I can see the values, but can't use a date preset Does someone know how to get this working? The use case is that I want to easily see all values at once Vänliga hälsningar / Best regards, [Advania_Trappa_CMYK] Christian Eriksson Service Area Manager [cid:image003.png@01D62E93.89825AA0]<mailto:christian.eriksson@advania.com>[Advania-Bikupa Facebook]<https://www.facebook.com/advania.se/>[Advania-Bikupa LinkedIn]<https://www.linkedin.com/company/advania-ab/> +4641090488<tel:+4641090488> | +46761400400<tel:+46761400400> www.advania.se<http://www.advania.se/> | Liljeholmen<https://www.google.se/maps/place/Advania+Sverige+AB/@59.3062176,18.0278762,…> Ledande på att skapa kundnöjdhet [En bild som visar skärmbild Beskrivning genererad med hög exakthet]

2 4

Help creating an Alert Checker
by Pisano, Anthony D. 09 Jun '20

09 Jun '20

Hello, I am unable to figure out how to create an alert to notify me when our VPN boxes go into failover mode. Observium recognizes the event, but I would like a notification. The following output is from the poller. The normal condition value for “Failover Primary unit” should be ‘active’. o Status Count 2 +---------------------------------------+-----------------------------------------+-------+--------+---------+---------+---------------------+ | Descr | Type | Index | Origin | Value | Status | Last Changed | +---------------------------------------+-----------------------------------------+-------+--------+---------+---------+---------------------+ | Failover Primary unit | cisco-firewall-hardware-primary-state | 6 | snmp | standby | warning | 2020-06-07 07:30:03 | | Failover Secondary unit (this device) | cisco-firewall-hardware-secondary-state | 7 | snmp | active | warning | 2020-06-07 07:30:04 | +---------------------------------------+-----------------------------------------+-------+--------+---------+---------+——————————+ I’ve tried several strings to make this work, but the Alerter either marks it as OK or does not show the above Statuses at all. * status_event equal warn * status_event ne ok * “Failover Primary unit” ne active * also without quotes and with underscores between * “Failover Primary unit” equal warn * also without quotes and with underscores between * cisco-firewall-hardware-primary-state equal warn * cisco-firewall-hardware-primary-state equal standby Could anyone assist me in creating this Alert Checker? Thank you Anthony Pisano | Network Design Engineer | IMSS anthony.pisano(a)caltech.edu<mailto:anthony.pisano@caltech.edu> | (626) 395-4255<tel:(626)%20395-4255> | Caltech | caltech.edu<http://caltech.edu/>

2 2

Observium behind azure app proxy
by Ahmed Rahal 09 Jun '20

09 Jun '20

Hi, I am using observium walled behind an azure application proxy. This mainly exposes an AD authenticated endpoint publicly and proxies all allowed users to the real host. This has been working fine with observium community edition. Now I am switching to the enterprise version of observium and get errors on the dashboard saying 'unauthenticated' for each widget. Note that some of the widgets randomly appear working, then become 'unauthenticated' on a refresh. Also, when on the 'broken' dashboard, refreshing the page sends back to the login page. I can switch back and forth between the 2 versions (community & enterprise, with same config.php) and the issue appears instantly with the enterprise version. How can I diagnose the issue ? Is there any hint on what is going wrong ? TIa, Ahmed. -- Ahmed Rahal Administrateur de Systèmes / Systems Administrator *Fibrenoire* - www.fibrenoire.ca A: 550 , avenue Beaumont, bureau 320, Montréal (Québec) H3N 1V1 arahal(a)fibrenoire.ca Twitter: @fibrenoire

2 7

Ubiquiti Solar Controller MIBs
by Chris Macneill 09 Jun '20

09 Jun '20

Hi, Please add the MIBs & OIDs for Ubiquiti's SunMax Solar Controller, they can be obtained at:- [ https://dl.ui.com/solar/mib/20191129/UBNT-MIB | https://dl.ui.com/solar/mib/20191129/UBNT-MIB ] [ https://dl.ui.com/solar/mib/20191129/UBNT-SUNMAX-MIB | https://dl.ui.com/solar/mib/20191129/UBNT-SUNMAX-MIB ] (needs updated base UBNT-MIB) Regards Chris Macneill Network Engineer / Software Developer / Accounts & General Dog's Body Zelan Ltd. Web: www.zelan.co.nz

2 1

Cannot add new device
by Tomasz Karczewski 04 Jun '20

04 Jun '20

Last time i wanted to add new device but i cannot. Before there was any problems. I tried usign GUI and ./add_device and nothing happens Add device is stucking in: Observium 20.6.10470 Add Device(s) Try to add 10.14.14.97: Trying v2c community *** [0] ... Ping and snmpwalk is working. Tomasz Karczewski Administrator Sieci tkarczewski(a)man.olsztyn.pl http://www.man.olsztyn.pl http://www.uwm.edu.pl tel. (89) 523 45 55 fax. (89) 523 43 47 Ośrodek Eksploatacji i Zarządzania Miejską Siecią Komputerową OLMAN w Olsztynie Uniwersytet Warmińsko-Mazurski w Olsztynie

2 1

Observium Feature Request - Summarizations for Alert Emails
by Pisano, Anthony D. 02 Jun '20

02 Jun '20

Hello, I would like to make a feature request for alerts. Over the weekend a significant portion of campus lost power, generating an overwhelming flood of device down email notifications. Would it be possible add an option to hold off sending notifications until the current Alerting process has run, and then send a digest or summary of all devices sending alerts? Thanks Anthony Pisano | Network Design Engineer | IMSS anthony.pisano(a)caltech.edu<mailto:anthony.pisano@caltech.edu> | (626) 395-4255<tel:(626)%20395-4255> | Caltech | caltech.edu<http://caltech.edu>

3 2

Retain historic data
by Mohammed Kokani 02 Jun '20

02 Jun '20

Dear Experts, Hope all is well with you. Need your valuable advice, I have the below situation. # Physical DC movement done. # Change in Transit provider and change in IP address of AR's. # Polling was disabled before the physical move for AR's and N/W devices. # After physical move by mistake polling was enabled for the AR's, this has caused the loss of historic data captured for AR's by overwriting new data. Question : Can we retain the old historic data of specific devices by copying the whole device RRD folder from backup, if not is there any other method. *Thanks & Regards* *Mohammed Suhail | System Engineer* *Tel : +1-888-853-7733* PGP Fingerprint : 026B 6CEB CC08 152D 9372 0F51 DDFB 6758 6924 FBCC [image: cid:image016.png@01D321AA.4A00A6F0]

3 3

Version 20.4.10371 (27th May 2020) is 10371 revisions ahead.
by Peter Derissen 27 May '20

27 May '20

Hi All, Today we had some issue's with our server. Upgraded the distro to ubuntu 18.04 new php new apache2. Got everything back to work but getting this message on the top left side of the browser. Anyway to fix this? There is a newer revision of Observium available! Version 20.4.10371 (27th May 2020) is 10371 revisions ahead. Met vriendelijke groet, Peter Derissen Eurofiber Nederland Network Engineer Safariweg 25-31 +31 (0)6 11587110 3605 MA Maarssen [cid:image001.png@01D6342B.46244AF0]<https://www.eurofiber.nl/> Volg ons op Twitter<https://twitter.com/Eurofiber> | Linkedin<https://www.linkedin.com/company/eurofiber> | Facebook<https://www.facebook.com/eurofiberNL/> | Youtube<https://www.youtube.com/channel/UC6DavgEm7-ktAD8_Co_qnMA> Wilt u op de hoogte blijven van technische ontwikkelingen aan ons netwerk, nieuwe ICT ontwikkelingen en klantervaringen? Meld u dan aan voor onze maandelijkse nieuwsbrief<https://marketing.eurofiber.com/acton/fs/blocks/showLandingPage/a/15570/p/p…>. [cid:image002.jpg@01D6342B.46244AF0]<https://www.eurofiber.nl/> ******** IMPORTANT NOTICE ******** This e-mail (including any attachments) may contain information that is confidential or otherwise protected from disclosure and it is intended only for the addressees. If you are not the intended recipient, please note that any copying, distribution or other use of information contained in this e-mail (and its attachments) is not allowed. If you have received this e-mail in error, kindly notify us immediately by telephone or e-mail and delete the message (including any attachments) from your system. Please note that e-mail messages may contain computer viruses or other defects, may not be accurately replicated on other systems, or may be subject of unauthorized interception or other interference without the knowledge of sender or recipient. Eurofiber only sends and receives e-mails on the basis that Eurofiber is not responsible for any such computer viruses, corruption or other interference or any consequences thereof. Eurofiber Nederland B.V. is registered in the Chamber of Commerce of Amsterdam with number 34134377, VAT number NL 8088.51.524 B01. Eurofiber N.V. has its registered office at Belgicastraat 5 bus 7, 1930 Zaventem and is registered under national number 0435.204.851.

1 1

Observium's API documentation
by Ahmed Rahal 25 May '20

25 May '20

Hi, I am planning to use the observium API and found the documentation at https://docs.observium.org/api/. I am interested in updating the alerting rules through the API, is that feasible ? And if so, is there documentation for it ? TIA, -- Ahmed Rahal Administrateur de Systèmes / Systems Administrator *Fibrenoire* - www.fibrenoire.ca A: 550 , avenue Beaumont, bureau 320, Montréal (Québec) H3N 1V1 arahal(a)fibrenoire.ca Twitter: @fibrenoire

2 6

Barracuda Message Archiver mibs
by Tony Guadagno 19 May '20

19 May '20

Hi, i added my archiver to observium and it is identified but only with the most basic info. i have the mibs attached, could you please add these in to observium? thanks Tony

1 0

Reoccuring Scheduled Maintenance
by Mark Sanchez 15 May '20

15 May '20

Hey Adam & Team, We have a use case for a group of devices to not alert on them outside of 9am-5pm. Leveraging the API, can we setup a crontab, to achieve a recurring maintenance window for a particular group? Mark Sanchez // Firewall Engineer II *deepwatch* // *Advancing Security Operations* *Mobile:* 716.418.5420 *Office**:* 855.303.3033 Website <https://deepwatch.com> // Facebook <https://www.facebook.com/deepwatchsec> // Instagram <https://www.instagram.com/deepwatch_sec/> // LinkedIn <https://www.linkedin.com/company/deepwatchsec/> // Twitter <https://twitter.com/deepwatch_sec> Disclaimer The information contained in this communication from the sender is confidential. It is intended solely for use by the recipient and others authorized to receive it. If you are not the recipient, you are hereby notified that any disclosure, copying, distribution or taking action in relation of the contents of this information is strictly prohibited and may be unlawful. This email has been scanned for viruses and malware, and may have been automatically archived by Mimecast Ltd, an innovator in Software as a Service (SaaS) for business. Providing a safer and more useful place for your human generated data. Specializing in; Security, archiving and compliance. To find out more visit the Mimecast website.

4 10

Ignore "Status" sensors
by Ryan, Spencer J. 11 May '20

11 May '20

It would be awesome if we could turn alerting for individual "Status Indicators" off the same way we can for normal sensors. We have a few problematic hosts with sensor issues, for example a dead RAID battery on a machine that is getting decomm'd in a few weeks. Unfortunately this means that every day (re-alert interval) we get alarms for these hosts for the same issues. I'd love to be able to just turn those specific Indicators off, without having to remove the whole host from that Alert Checker, as we do still want to know if anything else is wrong with the box. Same with the reoccurring alerts, we want to leave those on for all devices. ________________________________ Spencer J. Ryan | Manager, Technology and Infrastructure Miller Canfield T +1.313.496.7979 ________________________________

4 3

Re: [Observium] observium Digest, Vol 118, Issue 2
by shaun＠sbnetworks.co.za 07 May '20

07 May '20

Hi Ahmed Thank you very very much for your response. Is there perhaps an online document or manual you can refer me to in order to get the actual steps / commands for achieving the backups you have pointed out? Excuse my lack of understanding this, I am very new to Linux distributions and deployments. Thanking you in advance -----Original Message----- From: observium <observium-bounces(a)observium.org> On Behalf Of observium-request(a)observium.org Sent: Tuesday, 05 May 2020 1:00 PM To: observium(a)observium.org Subject: observium Digest, Vol 118, Issue 2 Send observium mailing list submissions to observium(a)observium.org To subscribe or unsubscribe via the World Wide Web, visit http://postman.memetic.org/cgi-bin/mailman/listinfo/observium or, via email, send a message with subject or body 'help' to observium-request(a)observium.org You can reach the person managing the list at observium-owner(a)observium.org When replying, please edit your Subject line so it is more specific than "Re: Contents of observium digest..." Today's Topics: 1. Observium Configuration & DataBase BAckup & Restore (shaun(a)sbnetworks.co.za) 2. Re: Observium Configuration & DataBase BAckup & Restore (Ahmed Rahal) ---------------------------------------------------------------------- Message: 1 Date: Mon, 4 May 2020 20:09:54 +0200 From: <shaun(a)sbnetworks.co.za> To: <observium(a)observium.org> Subject: [Observium] Observium Configuration & DataBase BAckup & Restore Message-ID: <005301d6223f$36c85130$a458f390$(a)sbnetworks.co.za> Content-Type: text/plain; charset="utf-8" Hi all I hope and trust everyone is keeping well and safe during this time. Can anyone please assist me, I am trying to make a backup of my Observium installation to move it to a "bigger" system / machine, I installed the application to see how it worked and to test features, needless to say that I love it, and have subsequently set it up to monitor my entire WISP network. However, I unfortunately did not pay much attention to the system's specifications, as it was not initially intended to be a permanent deployment, not knowing what to expect or that it would turn out to be such a wonderful tool. Please could you advise on a step by step procedure to enable me to make a full backup of the installation / database / configs in order to migrate it to a more future proof system, bearing in mind that my Linux experience is very limited. Your assistance will be greatly appreciated Stay safe Regards, Shaun

3 2

Device group membership in alerts?
by Ryan, Spencer J. 05 May '20

05 May '20

I've got a usecase to have the group names that a device is a member of passed down to the alerts, specifically Pagerduty. On the PD side, I can route incidents based on arbitrary details, and if I had group membership I could say "If device.groups contains "Network" route to XXX", instead of having to build a unique alert check for every group. The mocked up SQL query is SELECT group_name FROM groups WHERE group_id IN (SELECT group_id FROM group_table WHERE entity_type = 'device' AND entity_id = ?); Any chance that information can be made available? I'm happy to write the code if needed. ________________________________ Spencer J. Ryan | Manager, Technology and Infrastructure Miller Canfield T +1.313.496.7979 ________________________________

2 1

Observium Configuration & DataBase BAckup & Restore
by shaun＠sbnetworks.co.za 04 May '20

04 May '20

Hi all I hope and trust everyone is keeping well and safe during this time. Can anyone please assist me, I am trying to make a backup of my Observium installation to move it to a "bigger" system / machine, I installed the application to see how it worked and to test features, needless to say that I love it, and have subsequently set it up to monitor my entire WISP network. However, I unfortunately did not pay much attention to the system's specifications, as it was not initially intended to be a permanent deployment, not knowing what to expect or that it would turn out to be such a wonderful tool. Please could you advise on a step by step procedure to enable me to make a full backup of the installation / database / configs in order to migrate it to a more future proof system, bearing in mind that my Linux experience is very limited. Your assistance will be greatly appreciated Stay safe Regards, Shaun

2 1

SNMP Max Repetitons enabled - some modules takes longer time to poll
by Kent Johannessen 30 Apr '20

30 Apr '20

Hello, We recently enabled max-rep to improve our Observium installation. And it did reduce polling time for most modules. But we see some module had significant increases. Specifically the poller modules for cisco eigrp, cef and cbqos and the bgp poller also seems to have increased somewhat. Has anyone seen this behavior ? Where should be begin to look? NOTICE: Please immediately e-mail back to sender if you are not the intended recipient. Thereafter delete the e-mail along with any attachments without making copies. The sender reserves all rights of privilege, confidentiality and copyright.

2 1

Re: [Observium] asterisk?
by Tony Guadagno 29 Apr '20

29 Apr '20

Brian, thanks for replying, to be honest, I was not sure my email went through…..since no one at observium bothered to comment! But as far as the agent file, I am not sure how I can use that? thanks Tony From: Brian ::<mailto:bc@iptel.co> Sent: Tuesday, April 28, 2020 5:25 PM To: Observium<mailto:observium@observium.org> Cc: Tony Guadagno<mailto:tonyg@guadagno.org> Subject: Re: [Observium] asterisk? There is an asterisk agent file. Have a look at that. Will give you channels / calls and registration numbers I think. On Wednesday, April 15, 2020, Tony Guadagno via observium <observium(a)observium.org<mailto:observium@observium.org>> wrote: > Hi, I sent this request weeks ago and got no answer on it….can someone at observium comment on when/if this could be implemented? > > > > Thanks > > > > > > https://wiki.asterisk.org/wiki/display/AST/Asterisk+MIB+Definitions > > > > > > tony > > > > From: Tony Guadagno via observium > Sent: Thursday, March 19, 2020 4:12 PM > To: Chris Macneill via observium > Cc: Tony Guadagno > Subject: [Observium] asterisk? > > > > Hi, i have configured my freepbx server (asterisk 16) for snmp and observium is showing it as a Linux server. I have asterisk configured for snmp, can observium be configured to show asterisk data? This is a link to the mib > > > > > > Tony Guadagno > > Guadagno Consulting > > O +1 585 577 1003 > > C +1 585 703 6700 > > E tonyg(a)guadagnoconsulting.com<mailto:tonyg@guadagnoconsulting.com> > > > >

3 4

Re: [Observium] asterisk?
by Tony Guadagno 29 Apr '20

29 Apr '20

Niklas, I was unaware of the asterisk agent, I will give that a try, thanks for pointing it out! Tony From: Niklas Larsson via observium<mailto:observium@observium.org> Sent: Wednesday, April 29, 2020 8:40 AM To: observium(a)observium.org<mailto:observium@observium.org> Cc: Niklas Larsson<mailto:niklas@tese.se> Subject: Re: [Observium] asterisk? Hi, I'm using the asterisk agent thing, and also the one who wrote it. It's working and showing calls, channels and registrations for SIP (for PJSIP I have not pushed my changes to observium) and IAX. Usage - just install the observium UNIX agent ( https://docs.observium.org/unix_agent/ ) and add/symlink asterisk to /usr/lib/observium_agent/scripts-enabled /niklas On 2020-04-29 14:26, Tony Guadagno via observium wrote: Adam, can you comment on this thread? I think there is an appetite out there for asterisk metrics in observium, would you entertain this? Tony From: Tony Guadagno via observium<mailto:observium@observium.org> Sent: Wednesday, April 29, 2020 7:46 AM To: Brian ::<mailto:bc@iptel.co>; Observium<mailto:observium@observium.org> Cc: Tony Guadagno<mailto:tonyg@guadagno.org> Subject: Re: [Observium] asterisk? Brian, thanks for replying, to be honest, I was not sure my email went through…..since no one at observium bothered to comment! But as far as the agent file, I am not sure how I can use that? thanks Tony From: Brian ::<mailto:bc@iptel.co> Sent: Tuesday, April 28, 2020 5:25 PM To: Observium<mailto:observium@observium.org> Cc: Tony Guadagno<mailto:tonyg@guadagno.org> Subject: Re: [Observium] asterisk? There is an asterisk agent file. Have a look at that. Will give you channels / calls and registration numbers I think. On Wednesday, April 15, 2020, Tony Guadagno via observium <observium(a)observium.org<mailto:observium@observium.org>> wrote: > Hi, I sent this request weeks ago and got no answer on it….can someone at observium comment on when/if this could be implemented? > > > > Thanks > > > > > > https://wiki.asterisk.org/wiki/display/AST/Asterisk+MIB+Definitions > > > > > > tony > > > > From: Tony Guadagno via observium > Sent: Thursday, March 19, 2020 4:12 PM > To: Chris Macneill via observium > Cc: Tony Guadagno > Subject: [Observium] asterisk? > > > > Hi, i have configured my freepbx server (asterisk 16) for snmp and observium is showing it as a Linux server. I have asterisk configured for snmp, can observium be configured to show asterisk data? This is a link to the mib > > > > > > Tony Guadagno > > Guadagno Consulting > > O +1 585 577 1003 > > C +1 585 703 6700 > > E tonyg(a)guadagnoconsulting.com<mailto:tonyg@guadagnoconsulting.com> > > > > _______________________________________________ observium mailing list observium(a)observium.org<mailto:observium@observium.org> http://postman.memetic.org/cgi-bin/mailman/listinfo/observium

1 0

Re: [Observium] Observium API
by Klimek, Denis 29 Apr '20

29 Apr '20

Hi Serghei, you can fetch all information from the SQL database 😊 Mit freundlichem Gruß Stadtwerke Norderstedt Denis Klimek Carrier Manager & Professional Network Engineer IP-Systemtechnik Tel: +49 (0) 40 / 521 04 – 1049 > Working from home Mobil: +49 (0) 151 / 652 219 06 dklimek(a)stadtwerke-norderstedt.de<mailto:dklimek@stadtwerke-norderstedt.de> www.stadtwerke-norderstedt.de<http://www.stadtwerke-norderstedt.de/> Von: observium <observium-bounces(a)observium.org> im Auftrag von Serghei Golipad via observium <observium(a)observium.org> Antworten an: Observium <observium(a)observium.org> Datum: Dienstag, 28. April 2020 um 17:44 An: "observium(a)observium.org" <observium(a)observium.org> Cc: Serghei Golipad <s.golipad(a)uk.cdw.com> Betreff: [Observium] Observium API Hi, Is there any way of getting list of port ID’s other than looping through a million times and match on device_id? 😊 Thank you. PLEASE CONSIDER THE ENVIRONMENT BEFORE PRINTING THIS EMAIL. CDW Limited is a Company registered in England and Wales. This email is sent for and on behalf of CDW Finance Holdings Limited. CDW Finance Holdings Limited is the UK holding company for CDW Limited trading as CDW. The registered office for CDW Finance Holdings Limited (Company Number 05872067) and its UK group undertakings is 10 Fleet Place, London, EC4M 7RB. VAT Registration 902 1949 39. Confidentiality: This e-mail contains proprietary information, some or all of which may be confidential and/or legally privileged. It is for the intended recipient only. If an addressing or transmission error has misdirected this e-mail, please notify the author by replying to this e-mail and then delete the original. If you are not the intended recipient you may not use, disclose, distribute, copy, print or rely on any information contained in this e-mail. You must not inform any other person other than CDW or the sender of its existence. For more information about CDW please visit www.uk.cdw.com

3 4

mail archive link broken
by Tony Guadagno 29 Apr '20

29 Apr '20

Hi, I noticed a while ago that the first link on this page http://postman.memetic.org/cgi-bin/mailman/listinfo/observium to the mail archives is broken….it has been broken for a long time…are there no archives? Can this be fixed? thanks Tony

2 2

Need help to change email address on subscription account
by Graf Vincent 29 Apr '20

29 Apr '20

Hello, I need some help to change some information on our subscription account. I cannot find anything on site web page nor the possibilities to change that via observium.org/subs Any suggestion ? Kind regards Vincent

2 1

Observium API
by Serghei Golipad 28 Apr '20

28 Apr '20

Hi, Is there any way of getting list of port ID’s other than looping through a million times and match on device_id? 😊 Thank you. PLEASE CONSIDER THE ENVIRONMENT BEFORE PRINTING THIS EMAIL. CDW Limited is a Company registered in England and Wales. This email is sent for and on behalf of CDW Finance Holdings Limited. CDW Finance Holdings Limited is the UK holding company for CDW Limited trading as CDW. The registered office for CDW Finance Holdings Limited (Company Number 05872067) and its UK group undertakings is 10 Fleet Place, London, EC4M 7RB. VAT Registration 902 1949 39. Confidentiality: This e-mail contains proprietary information, some or all of which may be confidential and/or legally privileged. It is for the intended recipient only. If an addressing or transmission error has misdirected this e-mail, please notify the author by replying to this e-mail and then delete the original. If you are not the intended recipient you may not use, disclose, distribute, copy, print or rely on any information contained in this e-mail. You must not inform any other person other than CDW or the sender of its existence. For more information about CDW please visit www.uk.cdw.com

1 0

Attention to OBS-3006 (vPC onNX-OS)
by xomka686 27 Apr '20

27 Apr '20

Hello, I've done a quick patch to get vPC metrics from NX-OS devices, can you kindly take a look at it? The Jira issue is https://jira.observium.org/projects/OBS/issues/OBS-3006 For now, that adds just graphs to Status section. I can put some effort to create a full-blown vPC tab on the Device page to get even more stats for it, what do you think on that? --- Sergei Fomin

2 2

Probe alerting
by Christian Eriksson 27 Apr '20

27 Apr '20

Hi, Anyone doing alerting on probes? I can match the probes in my association but not alert based on: Require Any status_event eq warning status_event eq alert [cid:image013.jpg@01D61A17.21E64F40] [cid:image014.jpg@01D61A17.21E64F40] Vänliga hälsningar / Best regards, [Advania_Trappa_CMYK] Christian Eriksson Service Area Manager [cid:image005.png@01D61A17.1483F2D0]<mailto:christian.eriksson@advania.se>[Advania-Bikupa Facebook]<https://www.facebook.com/advania.se/>[Advania-Bikupa LinkedIn]<https://www.linkedin.com/company/advania-ab/>[Advania-Bikupa Twitter]<https://twitter.com/advania_se> +4641090488<tel:+4641090488> | +46761400400<tel:+46761400400> www.advania.se<http://www.advania.se/> | Stockholm<https://www.google.se/maps/place/Advania+Sverige+AB/@59.3062176,18.0278762,…>

7 16

PPPoE Interfaces Deleted
by shaun＠sbnetworks.co.za 23 Apr '20

23 Apr '20

Hi guys, Please if anyone could offer some advice or guidance I would really appreciate it. I recently deployed Observium in my network for monitoring purposes, everything is working great, better than ever expected, except for the following: Each time a PPPoE client interfaces reconnects, the previous data is deleted, interface is deleted and the graphs and usage data start fresh from the time of the new connection. Is there any way of setting up the Observium installation to retain previous session data and usage and just have it "carry on" recording data each time the PPPoE session reconnects? Any assistance will be appreciated. Thanking you in advance Shaun

4 5

sysContact-->Observium Contact
by Ryan, Spencer J. 22 Apr '20

22 Apr '20

Is it possible to use a device's sysContact (Either from SNMP or an override) to tie that to a specific observium contact, or is that for the email transport only? My use case is that I want different devices to go to different pagerduty integrations, and the only way I can see to do that right now is to build different alert checks for each set, with the correct PD "Contact" associated with that checker. Thanks in advance! ________________________________ Spencer J. Ryan | Manager, Technology and Infrastructure Miller Canfield T +1.313.496.7979 ________________________________

2 2

Re: [Observium] observium Digest, Vol 117, Issue 15
by Mosharaf Hossain 20 Apr '20

20 Apr '20

Hi I am trying to send alert mail for any device down/port down status only when it down and in an interval. But getting a problem that Observium send the alert report with all down port for an active device which overwhelmed my inbox. Is there any guideline to activating this feature without such behaviour? -- Regards, *Mosharaf Hossain* On Sun, Apr 19, 2020 at 5:00 PM <observium-request(a)observium.org> wrote: > Send observium mailing list submissions to > observium(a)observium.org > > To subscribe or unsubscribe via the World Wide Web, visit > http://postman.memetic.org/cgi-bin/mailman/listinfo/observium > or, via email, send a message with subject or body 'help' to > observium-request(a)observium.org > > You can reach the person managing the list at > observium-owner(a)observium.org > > When replying, please edit your Subject line so it is more specific > than "Re: Contents of observium digest..." > > > Today's Topics: > > 1. Re: Event Log Updates Very Often Remove Interface (Mike Stupalov) > > > ---------------------------------------------------------------------- > > Message: 1 > Date: Sat, 18 Apr 2020 16:02:30 +0300 > From: Mike Stupalov <mike(a)observium.org> > To: Observium <observium(a)observium.org>, Aulia Rahman via observium > <observium(a)observium.org> > Subject: Re: [Observium] Event Log Updates Very Often Remove Interface > Message-ID: <1cd8cf42-3bd7-4811-a3cb-e9a5a59a77d9(a)observium.org> > Content-Type: text/plain; charset="utf-8" > > Hi, > > this is due to network delays to VM and/or disk read latency on this VM. > > Increase SNMP timeout to this host to 2-3 sec (in device edit page). > > Aulia Rahman via observium wrote on 18.04.2020 08:08: > > Hello, > > > > Some VM have event logs with interface status add, remove, delete. > > It occurred very often. What happened with this ? And how to solved this. > > Btw, there's no changes in the VM. > > > > image.png > > > > image.png > > > > Demikian yang dapat kami sampaikan, terimakasih. > > > > Regards, > > Aulia Rahman > > > > > > > > > > _______________________________________________ > > observium mailing list > > observium(a)observium.org > > http://postman.memetic.org/cgi-bin/mailman/listinfo/observium > > -- > Mike Stupalov > Observium Limited, http://observium.org > >

2 1

Event Log Updates Very Often Remove Interface
by Aulia Rahman 18 Apr '20

18 Apr '20

Hello, Some VM have event logs with interface status add, remove, delete. It occurred very often. What happened with this ? And how to solved this. Btw, there's no changes in the VM. [image: image.png] [image: image.png] Demikian yang dapat kami sampaikan, terimakasih. Regards, Aulia Rahman

2 1

Unable to upgrade subscription
by Chris Murrell 17 Apr '20

17 Apr '20

Hello, I have the community version and am trying to upgrade to the subscription which i have just paid for. I am getting the following error. svn update Skipped '.' Summary of conflicts: Skipped paths: 1 or svn switch https://svn.observium.org/svn/observium/branches/stable svn: E155007: '/opt/observium' is not a working copy Can anyone please help me and let me know why the upgrade doesnt work and how to resolve it? Kind Regards, Chris Murrell Senior Systems Administrator ___________________________________________________________________________________________ Netcetera™ Passionate about hosting, committed to service The Dataport DDI: +44.330.010.1823 <0330%20010%201823> Ballasalla Support: +44.3330.439780 <0333%20043%209780> Isle of Man Sales: +44.3330.439780 IM9 2AP Fax: +44.870.4324.638 <0870%20432%204638> British Isles Web: http://www.netcetera.co.uk ____________________________________________________________________________________________ Microsoft Partner - ISO9001:2015 - ISO14001:2015 - ISO27001:2013 How are we doing? Please click here to tell Netcetera - we're listening <https://netcetera.mobi/rateit/?id=3>

2 1

Datepicker timezone
by Farshid Abediny 17 Apr '20

17 Apr '20

Hello, i have set correct timezone for PHP, mysql, system but when i want enter date and time in date picker for a graph the time is wrong, where can i fix it? thank you.

1 0

Not able to connect to SVN / update
by John 16 Apr '20

16 Apr '20

I just renewed my observium license, which was out of date for a while. Trying to run svn update now but can't make a connection to the server from my Observium machine. I can connect fine from a machine on a different network, which is weird. IP of Observium machine: 216.27.95.80 Username: tempeh-170154 Tried both svn and a plain CURL, with and without --username and --password. Any thoughts?

2 4

Want say Thanks
by Edvinas Kairys 16 Apr '20

16 Apr '20

Hello, Just wanted to say thanks for the last stable update. I'really happy for getting my memory, cpu, bgp, etc graphs back:)

3 3

How to diagnose failing ldap
by Michael Spaulding 15 Apr '20

15 Apr '20

So I had the server working with mysql login, but I'm struggling with getting the ldap authentication to work. I copied the example out of the instructions, but every time I enter the username/password, the website just resets. I tried going to http://fqdn/debug, but it just tells me that the cache is disabled in the config, which it is. Unfortunately I can't find any debug logs, or entries in any logs that would help to isolate the issue. This is my Authentication Model section <scrubbed>: // Authentication Model // $config['auth_mechanism'] = "mysql"; // default, other options: ldap, http-auth, please see documentation for config help $config['auth_mechanism'] = "ldap"; $config['auth_ldap_binddn'] = "<Distinguished Name>"; $config['auth_ldap_bindpw'] = "<Password>"; $config['auth_ldap_attr']['uid'] = "sAMAccountName"; $config['auth_ldap_attr']['uidNumber'] = "objectSid"; $config['auth_ldap_attr']['cn'] = "name"; $config['auth_ldap_attr']['dn'] = "distinguishedname"; $config['auth_ldap_objectclass'] = "person"; $config['auth_ldap_version'] = 3; $config['auth_ldap_server'] = "<domain controller.domain>"; $config['auth_ldap_port'] = 389; $config['auth_ldap_starttls'] = false; $config['auth_ldap_prefix'] = "uid="; $config['auth_ldap_suffix'] = ",<Distinguished Name Suffix>"; $config['auth_ldap_group'] = array("<Distinguished Name of Observium Users Group>"); $config['auth_ldap_groupbase'] = "<Distinguished Name of Group Base>"; $config['auth_ldap_groupmembertype'] = "fulldn"; $config['auth_ldap_groupmemberattr'] = "member"; unset($config['auth_ldap_groups']); $config['auth_ldap_groups']['Distinguished Name of Observium Admins Group']['level'] = 10; $config['auth_ldap_groups']['Distinguished Name of Observium Users Group']['level'] = 1; Any suggestions are much appreciated! Michael Spaulding | Systems Administrator Information Technology | Division of Student Affairs 1259 TAMU | College Station, TX 77843-1259 ph: 979.458.9223 | mspaulding(a)tamu.edu | doit.tamu.edu - - - - - - - - - - - - - - - - - - - - - - - - TEXAS A&M UNIVERSITY

2 1

Default port for web-access
by James Ngo 15 Apr '20

15 Apr '20

Hello everyone, I am totally new to Observium and has found the app is very useful. I installed Observium using the automated method, first on a VirtualBox to test out the features. So far everything has worked for me (yay.) I am planning to install the app on the actual production server, running Ubuntu 18.04 server, latest updates and all However, on the production server, we have already Freeradius which use mysql and phpMyAdmin to maintain the database. These are using the default port 80 I tried to find where I can change the default port at the installation but I could not find anything. If I change the default port in the /etc/apache2/ports.conf (and subsequent in the virtualhost), would that change my Freeradius server default port as well? My second question, is there a command line that I can use to reset the admin username/password? If we forget the admin password, how could we get back to the program? So if anyone here has run both engine on the same server, please shred a light on this for me? Thank you all you guys, and sorry if this question is a nob! James -- This email has been checked for viruses by AVG. https://www.avg.com

3 2

mikrotik chr
by Pieter Meyer 15 Apr '20

15 Apr '20

Hi Guys I have picked up that some things has changed on the Mikrotik MIB, I have seen the below in the event log, This causes that you cannot filter for CHR routers under devices Hardware changed: 'CHR' -> '' Serial changed: 'xxxxxxxxxx' -> '' Regards Pieter Meyer

1 0

Graphs Problem
by Remzi BAŞOĞLU 15 Apr '20

15 Apr '20

Hi, I installed Observium and added a few machines. I can see details (RAM, disk etc) but the graphs doesnt show anything. What should I do ? [image: image.png] Thanks.

2 1

asterisk?
by Tony Guadagno 15 Apr '20

15 Apr '20

Hi, I sent this request weeks ago and got no answer on it….can someone at observium comment on when/if this could be implemented? Thanks https://wiki.asterisk.org/wiki/display/AST/Asterisk+MIB+Definitions tony From: Tony Guadagno via observium<mailto:observium@observium.org> Sent: Thursday, March 19, 2020 4:12 PM To: Chris Macneill via observium<mailto:observium@observium.org> Cc: Tony Guadagno<mailto:tonyg@guadagno.org> Subject: [Observium] asterisk? Hi, i have configured my freepbx server (asterisk 16) for snmp and observium is showing it as a Linux server. I have asterisk configured for snmp, can observium be configured to show asterisk data? This is a link to the mib Tony Guadagno Guadagno Consulting O +1 585 577 1003 C +1 585 703 6700 E tonyg(a)guadagnoconsulting.com

1 0