- observium - lists.observium.org

Time rules for contacts
by noc＠green.ch 19 Jan '25

19 Jan '25

Hi all, We are encountering the following issue and would like to request a new feature to address it. Problem: We have several alert checkers, such as "interface down," configured with time-based conditions for office hours (08:00–18:00) and with "send recovery notification" option enabled. This results in a recovery message being sent at 18:00, even if the interface is still down. Proposed Solution: To resolve this issue, we suggest moving the time restrictions from the alert checker to the contact settings. Specifically, we propose adding the ability to configure time and weekday restrictions directly in the contact settings (e.g., for email contacts). These settings could mirror the time and weekday conditions currently available in alert checkers. For example: Time: between 08:00 and 18:00 Weekdays: 1, 2, 3, 4, 5 This feature would allow us to better manage notifications and avoid unnecessary recovery messages outside office hours. Thank you for considering this request, and we look forward to your response. Best regards, Raphael

1 0

Serial number SFP module switch ARUBA 6000+
by Arnoldo Vidal Bravo 13 Jan '25

13 Jan '25

hi. On our observium we can find SFP modules (searching by serial) installed on switch HP 2530 or Aruba 2530, but search on switch Aruba CX 6000+ not work. we can't find these information to know where is physically located. we appreciate helpus. -- Saluda cordialmente

2 1

webhook Teams 400 bad request
by staf.vangestel＠vitohoogstraten.be 13 Jan '25

13 Jan '25

"Hello, we started using Observium a while back (Observium CE 24.4.13528). I want to receive notifications within our Team in case of issues, so I created a webhook in Teams and added it in Observium under contacts. However, when I perform a test with `test_alert.php`, I get the error message '400 Bad Request' with the error 'Summary or Text is required'. I've read a lot about this issue, but I haven't been able to resolve it. I'm not very skilled at debugging, but I did test with Webhoo.site, and that works. Also, when I run `curl -H "Content-Type: application/json" -d '{"text": "Hello"}' https://xxxxxx`, the "Hello" message arrives in the Team. So why does it fail with `test_alert.php` (and also with the alerts)? Thank you in advance for any response." Staf Van Gestel Vito Hoogstraten --- Let me know if you need any further adjustments!

2 4

Ports of transit data resume
by Arnoldo Vidal Bravo 05 Jan '25

05 Jan '25

HELLO, I need to configure an alert for ports with transit description. To know which are transit ports I hope to use the network map. How can I export the data generated with the network map in a table? [image: image.png] The image shows a button to export data, but not in a table. -- Saluda cordialmente

2 1

Monitoring UPS
by Bar Russo 26 Dec '24

26 Dec '24

Hey there. I have UPS of Solar Edge and I succeed to monitor it via the Observium. The thing is, that beside if it's up or down I don't get any information about it. Such as Battery status, etc. Do I need to add some specific OID's or something? Thanks in advance. Best regards, Bar Russo | Information Technology Phone: 03-9546064 Address: Ariel Sharon 8 blvd. Or-Yehuda Linkedin<https://www.linkedin.com/company/77639321/admin/> | Facebook<https://www.facebook.com/mgroup.mgar> | Mgrp.co.il [תמונה שמכילה גופן, גרפיקה, לוגו, עיצוב גרפי התיאור נוצר באופן אוטומטי]<https://www.mgar.co.il/>

2 1

4 devices showing down after update to Observium
by Anthony Polselli 22 Dec '24

22 Dec '24

4 of my switches are showing: "Down (DNS)..." If I SSH into the server I can still ping the switches by DNS name. Thoughts? [cid:image001.png@01DB53CA.60F46450] __________________________________________ Anthony Polselli Chief Technology Officer Natural Networks, Inc. 7047 Carroll Rd. San Diego, CA 92121 anthony(a)naturalnetworks.com<mailto:anthony@naturalnetworks.com> http://www.naturalnetworks.com<http://www.naturalnetworks.com/> (619) 222-3232, ext: 101 office [cid:image002.png@01DB53CA.60F46450]

2 1

Building an Observium appliance
by Serge Caron 16 Dec '24

16 Dec '24

It's time I give something back to the community. This project, GitHub - SergeCaron/observium_appliance: Build and maintain an Observium appliance<https://github.com/SergeCaron/observium_appliance>, is aimed at SMB environments and walks the sysadmin through each phase of creating and maintaining (backup, restore, upgrade) an Observium appliance. It also covers the installation of Let's Encrypt certificates, secure (https) access to the Observium web site, basic email configuration for notifications, and log aggregation. It's basically a recipe with scripts. A small appliance with fault tolerant network configuration is shown to emphasize the standalone nature of the project. Of course, any virtual environment can do ;-) I hope I kept the typos and omissions to a minimum. Regards, Serge Caron

4 4

User access levels
by Tibor Marchyn 06 Dec '24

06 Dec '24

Hi, I have another beginner question please. I have setup Active Directory authentication, but how can I limit users to exact devices? I really do not want for some users to see anything else than they need to and all of them have level 1 access. And I can't see any option to limit them or assign user to device. Also it would be great to assign users to exact device group I have created. Thanks a lot Tibor

2 2

Alert Checker question
by Kalafus, Miroslav 04 Dec '24

04 Dec '24

Hi, Adam, is it possible to create an Alert Checker which will check number of trunks (see picture - trunk1,3,6 = 3) for trunk6 ? Something like: if it greater than 1, alert me? Trunk1,3,6 are discovered by Observium itself, I do not know how to check that type of item. Thanks in advance, Miro

2 2

limit time retention of device
by Raphael Pierazzi 04 Dec '24

04 Dec '24

Hello , I am using the Professional edition. I would like to limit the retention of graph information on a device to a maximum of 2 years. I often have to increase my disk capacity. thank you very much, Best Regard's Raphael

2 2

Observium isn't checking devices anymore.
by Bar Russo 03 Dec '24

03 Dec '24

Greetings, When I check the alerts I've created I can see that it's been 6 days since the last check was done, six days that the observium didn't check it. [cid:image001.png@01DB4580.CC60ADA0] For some reason it stopped checking my devices, I shut down a server and I don not receive an alert obviously. If I'm checking logs from /opt/observium/logs/observium.log I can see from the 27/11 [2024/11/27 09:45:46 +0200] poller.php(4002645): poller.php: 10.1.6.203 - 1 devices polled in 2.6017 secs [2024/11/27 09:45:46 +0200] poller.php(4002858): poller.php: 10.1.6.70 - 1 devices polled in 2.2512 secs Any ideas please? Best regards, Bar Russo | Information Technology Phone: 03-9546064 Address: Ariel Sharon 8 blvd. Or-Yehuda Linkedin<https://www.linkedin.com/company/77639321/admin/> | Facebook<https://www.facebook.com/mgroup.mgar> | Mgrp.co.il [תמונה שמכילה גופן, גרפיקה, לוגו, עיצוב גרפי התיאור נוצר באופן אוטומטי]<https://www.mgar.co.il/>

2 1

How to Download Professional Edition
by eddie.reyes＠lscu.coop 03 Dec '24

03 Dec '24

I have a valid subscription to the professional edition. I have decided to start from scratch and build a new Observium server, but cannot find where to download the Professional edition. Can someone help? Thanks.

2 1

Re: ... subscription has been disabled from email nikto.barrada@gmail.com
by Tobias Cederlund 27 Nov '24

27 Nov '24

I don't know why... But exactly the same for me. Last message I received on the mailing list was on feb 15. /Tobias

3 6

Ports switch are deleted after polling
by jan.croene＠police.belgium.eu 14 Nov '24

14 Nov '24

I have more than 100 alcatel switches configured in my observium. All of these can be discoverd/polled properly. However, I have 3 switches whose ports are deleted after the devices were added (I think after polling). When I run a discover again the ports show up in the GUI for a while, until the next polling. Other data such as vlans, temperature etc are always available. Other switches in the same environment does have normal behaviour. Of course the switch does operate normally all the time. Any ideas or suggestions? Thanks, Jan

3 2

OBSERVIUM STOP GRAPH
by SIMEON COMPANY CHILE SPA 11 Nov '24

11 Nov '24

Observium does not show the graphs. We are using Observium on a VPS server in the Cloud. We manage the devices via VPN. When you start adding several devices, more than 5 approximately, Observium shows the devices online, but does not show any information in the graphs of the interfaces. We have the professional subscription license. Thanks, José

2 1

Re: Ports showing it error.
by Bar Russo 10 Nov '24

10 Nov '24

? [cid:image001.png@01DB337E.0BE0A850] בר רוסו | מערכות מידע מייל: barr(a)mgrp.co.il<mailto:barr@mgrp.co.il> קבוצת Mgroup | אריאל שרון 8, אור יהודה www.mgrp.co.il<http://www.mgrp.co.il>

1 0

Ports showing it error.
by Bar Russo 07 Nov '24

07 Nov '24

Hey there. For some reason there are some ports in a few switch of mines that seems to be in error. [cid:image001.png@01DB3116.7130B2A0] The ports works fine, is it something I need to deal with or just don't mind it? Best regards, Bar Russo | Information Technology Phone: 03-9546064 Address: Ariel Sharon 8 blvd. Or-Yehuda Linkedin<https://www.linkedin.com/company/77639321/admin/> | Facebook<https://www.facebook.com/mgroup.mgar> | Mgrp.co.il [תמונה שמכילה גופן, גרפיקה, לוגו, עיצוב גרפי התיאור נוצר באופן אוטומטי]<https://www.mgar.co.il/>

1 0

alert box
by Arnoldo Vidal Bravo 05 Nov '24

05 Nov '24

Hi A few days ago we updated observium (from 23.2.12520 to 24.8.13606) and now we don't see the alerts for monitored ports. Before we saw yellow boxes (warnings), now they don't appear. Does it no longer show that information? port down we must add something in the config file? -- Saluda cordialmente

1 1

Air gapped device - status and monitoring
by Ivo van Tulden 28 Oct '24

28 Oct '24

Hello We have an air gapped device for back-up. This devices is active once a week for a couple of hours to get the latest back-up and then the device goes offline. The default behaviour is that the device is down and gives a 'error' for the rest of the week because it can't be reached. Is their a way to: * For a working window of the device? Meaning that outside the specified couple of hours the device will not show down/error? * Flip the device status when not in the working window? Meaning if the device goes online on a different time there is an alert? Met vriendelijke groet, Ivo van Tulden Industrial Automation [cid:image001.png@01DB2954.D83E8810] **** DISCLAIMER: The information sent in or attached to this e-mail is for the addressee only. If this e-mail message is unclear please contact VLISCO by e-mail or telephone. Disclosure or reproduction of this information to a third party without prior agreement of VLISCO is not allowed. VLISCO does not accept any responsibility for the correct and complete interpretation of this e-mail nor for the time of its arrival. VLISCO cannot be held responsible for any claim resulting from negotiations and/or decisions made directly or indirectly based on information contained in this e-mail message. Vlisco Netherlands B.V. Binnen Parallelweg 27, 5701 PH, Helmond, The Netherlands. Chamber of commerce Eindhoven 50751492. Tel.: +31 (0)492 570922 Fax: +31 (0)492 570230 Visit our website: www.vlisco.com ****

2 1

Observium - Halkbank Enterprise Plan Purchasing
by Recep Oguz AKKUS 25 Oct '24

25 Oct '24

Hello Dear Sir/Madam, We are one of the largest banks in Türkiye. With Observium, we want to monitor more than 4000 UPS and Printers in our branches. We are interested in purchasing a Enterprise plan. In accordance with the institution's procedures, we need to sign a contract for the purchase. We also request technical support for installation. Can we organise a meeting to get acquainted? Do you have a business partner in Turkey? Thanks in advance. Best Regards. [https://beraber.halkbank.com.tr/hbcdn/assets/image/mail/images/imza/logo.png]<https://www.halkbank.com.tr/> Information Technologies Operation Department [https://beraber.halkbank.com.tr/hbcdn/assets/image/mail/images/imza/konum.p…]<https://www.halkbank.com.tr/tr/iletisim.html> [https://beraber.halkbank.com.tr/hbcdn/assets/image/mail/images/imza/web.png] <https://www.halkbank.com.tr/> [https://beraber.halkbank.com.tr/hbcdn/assets/image/mail/images/imza/twitter…] <https://twitter.com/halkbank> [https://beraber.halkbank.com.tr/hbcdn/assets/image/mail/images/imza/faceboo…] <https://tr-tr.facebook.com/halkbank/> [https://beraber.halkbank.com.tr/hbcdn/assets/image/mail/images/imza/linkedi…] <https://www.linkedin.com/company/halkbank/> [https://beraber.halkbank.com.tr/hbcdn/assets/image/mail/images/imza/youtube…] <https://www.youtube.com/halkbank> [https://beraber.halkbank.com.tr/hbcdn/assets/image/mail/images/imza/instagr…] <https://www.instagram.com/halkbank/> Recep Oguz AKKUS / IT Technician [https://beraber.halkbank.com.tr/hbcdn/assets/image/mail/images/imza/mail.png] RecepOguz.AKKUS(a)halkbank.com.tr<mailto:RecepOguz.AKKUS@halkbank.com.tr> 📞 +90 216 503 47 62<sip:0216%20503%2047%2062> [https://beraber.halkbank.com.tr/hbcdn/assets/image/mail/images/imza/doga.png] I avoid wasting paper, I don't print unless necessary. *Bu e-posta ve ilişikteki dosyalar hukuken gizli ve kişisel veri/özel nitelikli kişisel veri içermektedir. Kişisel verilerle ilgili bilgilendirmeyi halkbank.com.tr adresinden okuyabilirsiniz. E-posta ve içeriği, sadece gönderilen gerçek veya tüzel kişinin gönderim amacıyla sınırlı kullanımı içindir. Muhatap, kendisine gönderilen bilgileri gönderim amacıyla sınırlı ve ölçülü olarak kullanacağını kabul eder. Eğer bu e-postanın muhatabı değilseniz bu e-postanın ve eklerinin kopyalarını herhangi bir şekilde kullanamaz, gönderemez, dağıtamaz ve yedekleyemezsiniz. Lütfen bu e-postayı yanlışlıkla aldıysanız, gönderene bu durumu bildiriniz ve e-posta ve ilişiğindeki belgeleri sistemden siliniz. Bu mesaj aksi sözleşme ile belirtilmedikçe herhangi bir işlem teklifi amacı taşımamaktadır. Türkiye Halk Bankası A.Ş.’nin hiçbir çalışanı veya temsilcisi, elektronik posta yolu ile Türkiye Halk Bankası A.Ş. adına bağlayıcı bir sözleşme yapmak için yetkilendirilmemiştir.* *This message contains confidential information and personal data/sensitive personal data. You can reach and read acknowledgement about data protection on halkbank.com.tr. It’s intended only limited use of the individual or legal entity to whom they are addressed only for sending purpose. Recipient acknowledges that he/she shall only use the information in accordance with its sending purpose. If you are not the named addressee, you should not use, disseminate, distribute or copy this e-mail and its attachment. Please notify the sender immediately by e-mail if you have received this email by mistake and delete this email and its attachment from your system. Unless otherwise specified by a mutual agreement, this message is not intended to be a request for a transaction. No employee or agent is authorized to conclude any binding agreement on behalf of Türkiye Halk Bankası A.Ş. with any third party by e-mail.*

1 0

VMware VMs keeps discovering more and more
by Ivo van Tulden 24 Oct '24

24 Oct '24

Dear community, This week I started with a new Observium installation, and love the product. A small problem is with my VMware 6.7 hosts (I know they are old) which keeps adding the same VM's to the list. How can I resolve this? Same VM a lot of times: [cid:image001.png@01DB1B14.94FE47F0] Met vriendelijke groet, Ivo van Tulden Industrial Automation **** DISCLAIMER: The information sent in or attached to this e-mail is for the addressee only. If this e-mail message is unclear please contact VLISCO by e-mail or telephone. Disclosure or reproduction of this information to a third party without prior agreement of VLISCO is not allowed. VLISCO does not accept any responsibility for the correct and complete interpretation of this e-mail nor for the time of its arrival. VLISCO cannot be held responsible for any claim resulting from negotiations and/or decisions made directly or indirectly based on information contained in this e-mail message. Vlisco Netherlands B.V. Binnen Parallelweg 27, 5701 PH, Helmond, The Netherlands. Chamber of commerce Eindhoven 50751492. Tel.: +31 (0)492 570922 Fax: +31 (0)492 570230 Visit our website: www.vlisco.com ****

3 5

Observium Professional Subscription
by Joseph Padueng 21 Oct '24

21 Oct '24

Hi Sir, If i want to Purchase Observium Professional Subscription, so what is the procedure? Regards, Joseph Padueng

1 0

Can't log into Observium
by dwalcott＠asgllc.com 21 Oct '24

21 Oct '24

Hey everyone, I had a functioning install of Observium 24.4.13528 (26th April 2024) running on Ubuntu 24.04.1 LTS, just using mysql for auth. I then tried to switch to AD by entering info in the "AD" section of the /settings web UI config page. Once I did that, I got the error below when trying to log in. I switched back to mysql login, by manually changing $config['auth_mechanism'] = "ad"; to $config['auth_mechanism'] = "mysql"; in config.php, and am able to log in again. Can anyone point me in the direction of what's wrong? array_keys(): Argument #1 ($array) must be of type array, null given in /opt/observium/html/includes/authentication/ad.inc.php:38 #0: (unknown function) called at [/opt/observium/html/includes/authentication/ad.inc.php:38] 33: } 34: } 35: 36: // If no access control groups are specified, use the defined level groups as access control 37: if (!is_array($config['auth_ad_group'])) { 38: $config['auth_ad_group'] = array_keys($config['auth_ad_groups']); 39: } 40: 41: // Synthesize Base DN from configured domain name, if it is not set 42: if (!isset($config['auth_ad_basedn'])) { 43: if (isset($config['auth_ad_domain'])) { #1: array_keys called at [/opt/observium/html/includes/authentication/ad.inc.php:38] 33: } 34: } 35: 36: // If no access control groups are specified, use the defined level groups as access control 37: if (!is_array($config['auth_ad_group'])) { 38: $config['auth_ad_group'] = array_keys($config['auth_ad_groups']); 39: } 40: 41: // Synthesize Base DN from configured domain name, if it is not set 42: if (!isset($config['auth_ad_basedn'])) { 43: if (isset($config['auth_ad_domain'])) { #2: include_once called at [/opt/observium/html/includes/authenticate.inc.php:126] 121: // Always load mysql as backup 122: include_once($config['html_dir'] . '/includes/authentication/mysql.inc.php'); 123: 124: // Load primary module if not mysql 125: if ($config['auth_mechanism'] !== 'mysql') { 126: include_once($auth_file); 127: } 128: 129: // Include base auth functions calls 130: include_once($config['html_dir'] . '/includes/authenticate-functions.inc.php'); 131: } else { #3: include called at [/opt/observium/html/index.php:72] 67: $_SERVER['PATH_INFO'] = $_SERVER['PATH_INFO'] ?? ($_SERVER['ORIG_PATH_INFO'] ?? ''); 68: 69: // Clean global $vars variable, it populated only after correct authenticating 70: unset($vars); 71: 72: include($config['html_dir'] . "/includes/authenticate.inc.php"); 73: 74: // Default theme set in global or user setting 75: if ($config['web_theme_default'] === 'system' && isset($_COOKIE['screen_scheme'])) { 76: $theme = $_COOKIE['screen_scheme']; 77: } else {

2 1

Buy subscription via invoice / bank transfer ?
by anders.jonsson＠norconsult.com 21 Oct '24

21 Oct '24

Hello, Thanks for your excellent software. We are very interested in buying a Professional Subscription subscription (to begin with) but we don't have company issued cards and not allowed to used paypal either. Is there any possibility to do a invoice / bank transfer instead ?

3 2

Custome Dashboard
by Bar Russo 15 Oct '24

15 Oct '24

Hello there. I want to know if there's an option to make a custome dashboard in the Observium that will show me CPU, Memory, Storage usage in percents like it shows me when I press on 'Health' and choose one of them. So instead of pressing on 'Health' and choose 'Processors' or 'Memory' or 'Storage' it'll show me in a dashboard of them in one dashboard. If it's possible I'll be more than glad to get help how to do it. Best regards, Bar Russo | Information Technology Phone: 03-9546064 Address: Ariel Sharon 8 blvd. Or-Yehuda Linkedin<https://www.linkedin.com/company/77639321/admin/> | Facebook<https://www.facebook.com/mgroup.mgar> | Mgrp.co.il [תמונה שמכילה גופן, גרפיקה, לוגו, עיצוב גרפי התיאור נוצר באופן אוטומטי]<https://www.mgar.co.il/>

1 0

Question about evaluation licenses
by Jonathan Sélea 14 Oct '24

14 Oct '24

Hi! I am wondering if Observium offers evaluation licensenses? I am looking into intergrating Observium with Zabbix, and noticed that Observium has a RESTful API included in the Professional License. I am however, unable to purchase a license in the current organization that I am in due to bureaucracy, and would love to have a evaluation license to we could test it for a month. Would that be possible? Thanks :) -- Jonathan Sélea

1 0

Ubuntu 24.04, rsyslogd 8.2312.0 Syslog integration
by prkjnr＠hotmail.com 11 Oct '24

11 Oct '24

Hi all, I have recently built to introduce Observium into my business. I can see Syslog entries running "tail -f /var/log/syslog" as soon as i enter config into /etc/rsyslog.d/30-observium.conf like from https://docs.observium.org/syslog/ and follow the 8.X instructions i get from an auto install version 2024-10-10T13:49:02.462169+01:00 Observium rsyslogd: action 'action-8-omprog' resumed (module 'omprog') [v8.2312.0 try https://www.rsyslog.com/e/2359 ] 2024-10-10T13:49:02.469290+01:00 Observium rsyslogd: omprog: failed to execute program '/opt/observium/syslog.php': Permission denied 2024-10-10T13:49:02.470590+01:00 Observium rsyslogd: child process (pid 565567) exited with status 1 [v8.2312.0] 2024-10-10T13:49:02.470763+01:00 Observium rsyslogd: omprog: program '/opt/observium/syslog.php' (pid 565567) terminated; will be restarted [v8.2312.0 try https://www.rsyslog.com/e/2119 ] 2024-10-10T13:49:02.470894+01:00 Observium rsyslogd: action 'action-8-omprog' suspended (module 'omprog'), retry 0. There should be messages before this one giving the reason for suspension. [v8.2312.0 try https://www.rsyslog.com/e/2007 ] 2024-10-10T13:49:03.476197+01:00 Observium rsyslogd: action 'action-8-omprog' resumed (module 'omprog') [v8.2312.0 try https://www.rsyslog.com/e/2359 ] 2024-10-10T13:49:03.485802+01:00 Observium rsyslogd: omprog: failed to execute program '/opt/observium/syslog.php': Permission denied 2024-10-10T13:49:03.486960+01:00 Observium rsyslogd: child process (pid 565568) exited with status 1 [v8.2312.0] 2024-10-10T13:49:03.487106+01:00 Observium rsyslogd: omprog: program '/opt/observium/syslog.php' (pid 565568) terminated; will be restarted [v8.2312.0 try https://www.rsyslog.com/e/2119 ] 2024-10-10T13:49:03.487173+01:00 Observium rsyslogd: action 'action-8-omprog' suspended (module 'omprog'), retry 0. There should be messages before this one giving the reason for suspension. [v8.2312.0 try https://www.rsyslog.com/e/2007 ] 2024-10-10T13:49:04.495956+01:00 Observium rsyslogd: action 'action-8-omprog' resumed (module 'omprog') [v8.2312.0 try https://www.rsyslog.com/e/2359 ] 2024-10-10T13:49:04.503258+01:00 Observium rsyslogd: omprog: failed to execute program '/opt/observium/syslog.php': Permission denied 2024-10-10T13:49:04.503510+01:00 Observium rsyslogd: omprog: program '/opt/observium/syslog.php' (pid 565569) terminated; will be restarted [v8.2312.0 try https://www.rsyslog.com/e/2119 ] 2024-10-10T13:49:04.503658+01:00 Observium rsyslogd: child process (pid 565569) exited with status 1 [v8.2312.0] 2024-10-10T13:49:04.513839+01:00 Observium rsyslogd: action 'action-8-omprog' suspended (module 'omprog'), retry 0. There should be messages before this one giving the reason for suspension. [v8.2312.0 try https://www.rsyslog.com/e/2007 ] 2024-10-10T13:49:05.519132+01:00 Observium rsyslogd: action 'action-8-omprog' resumed (module 'omprog') [v8.2312.0 try https://www.rsyslog.com/e/2359 ] 2024-10-10T13:49:05.526462+01:00 Observium rsyslogd: omprog: failed to execute program '/opt/observium/syslog.php': Permission denied 2024-10-10T13:49:05.527605+01:00 Observium rsyslogd: child process (pid 565571) exited with status 1 [v8.2312.0] 2024-10-10T13:49:05.527715+01:00 Observium rsyslogd: omprog: program '/opt/observium/syslog.php' (pid 565571) terminated; will be restarted [v8.2312.0 try https://www.rsyslog.com/e/2119 ] 2024-10-10T13:49:05.527812+01:00 Observium rsyslogd: action 'action-8-omprog' suspended (module 'omprog'), retry 0. There should be messages before this one giving the reason for suspension. [v8.2312.0 try https://www.rsyslog.com/e/2007 ] 2024-10-10T13:49:06.533091+01:00 Observium rsyslogd: action 'action-8-omprog' resumed (module 'omprog') [v8.2312.0 try https://www.rsyslog.com/e/2359 ] from a manual install 2024-10-10T12:48:21.195520+00:00 observium2 rsyslogd: action 'action-2-omprog' resumed (module 'omprog') [v8.2312.0 try https://www.rsyslog.com/e/2359 ] 2024-10-10T12:48:21.203242+00:00 observium2 rsyslogd: omprog: failed to execute program '/opt/observium/syslog.php': Permission denied 2024-10-10T12:48:21.203529+00:00 observium2 kernel: audit: type=1400 audit(1728564501.202:847): apparmor="DENIED" operation="exec" class="file" profile="rsyslogd" name="/opt/observium/syslog.php" pid=3214 comm=72733A6D61696E20513A526567 requested_mask="x" denied_mask="x" fsuid=103 ouid=1000 2024-10-10T12:48:21.203871+00:00 observium2 rsyslogd: child process (pid 3214) exited with status 1 [v8.2312.0] 2024-10-10T12:48:21.208108+00:00 observium2 rsyslogd: omprog: program '/opt/observium/syslog.php' (pid 3214) terminated; will be restarted [v8.2312.0 try https://www.rsyslog.com/e/2119 ] 2024-10-10T12:48:21.208234+00:00 observium2 rsyslogd: action 'action-2-omprog' suspended (module 'omprog'), retry 0. There should be messages before this one giving the reason for suspension. [v8.2312.0 try https://www.rsyslog.com/e/2007 ] 2024-10-10T12:48:22.213298+00:00 observium2 rsyslogd: action 'action-2-omprog' resumed (module 'omprog') [v8.2312.0 try https://www.rsyslog.com/e/2359 ] 2024-10-10T12:48:22.220546+00:00 observium2 kernel: audit: type=1400 audit(1728564502.219:848): apparmor="DENIED" operation="exec" class="file" profile="rsyslogd" name="/opt/observium/syslog.php" pid=3215 comm=72733A6D61696E20513A526567 requested_mask="x" denied_mask="x" fsuid=103 ouid=1000 2024-10-10T12:48:22.220765+00:00 observium2 rsyslogd: omprog: failed to execute program '/opt/observium/syslog.php': Permission denied 2024-10-10T12:48:22.221161+00:00 observium2 rsyslogd: child process (pid 3215) exited with status 1 [v8.2312.0] 2024-10-10T12:48:22.275077+00:00 observium2 rsyslogd: omprog: program '/opt/observium/syslog.php' (pid 3215) terminated; will be restarted [v8.2312.0 try https://www.rsyslog.com/e/2119 ] 2024-10-10T12:48:22.275233+00:00 observium2 rsyslogd: action 'action-2-omprog' suspended (module 'omprog'), retry 0. There should be messages before this one giving the reason for suspension. [v8.2312.0 try https://www.rsyslog.com/e/2007 ] 2024-10-10T12:48:23.279060+00:00 observium2 rsyslogd: action 'action-2-omprog' resumed (module 'omprog') [v8.2312.0 try https://www.rsyslog.com/e/2359 ] 2024-10-10T12:48:23.287555+00:00 observium2 rsyslogd: omprog: failed to execute program '/opt/observium/syslog.php': Permission denied 2024-10-10T12:48:23.287798+00:00 observium2 kernel: audit: type=1400 audit(1728564503.286:849): apparmor="DENIED" operation="exec" class="file" profile="rsyslogd" name="/opt/observium/syslog.php" pid=3217 comm=72733A6D61696E20513A526567 requested_mask="x" denied_mask="x" fsuid=103 ouid=1000 2024-10-10T12:48:23.288399+00:00 observium2 rsyslogd: child process (pid 3217) exited with status 1 [v8.2312.0] 2024-10-10T12:48:23.292012+00:00 observium2 rsyslogd: omprog: program '/opt/observium/syslog.php' (pid 3217) terminated; will be restarted [v8.2312.0 try https://www.rsyslog.com/e/2119 ] 2024-10-10T12:48:23.292140+00:00 observium2 rsyslogd: action 'action-2-omprog' suspended (module 'omprog'), retry 0. There should be messages before this one giving the reason for suspension. [v8.2312.0 try https://www.rsyslog.com/e/2007 ] 2024-10-10T12:48:24.296075+00:00 observium2 rsyslogd: action 'action-2-omprog' resumed (module 'omprog') [v8.2312.0 try https://www.rsyslog.com/e/2359 ] 2024-10-10T12:48:24.304221+00:00 observium2 rsyslogd: omprog: failed to execute program '/opt/observium/syslog.php': Permission denied 2024-10-10T12:48:24.304648+00:00 observium2 kernel: audit: type=1400 audit(1728564504.302:850): apparmor="DENIED" operation="exec" class="file" profile="rsyslogd" name="/opt/observium/syslog.php" pid=3218 comm=72733A6D61696E20513A526567 requested_mask="x" denied_mask="x" fsuid=103 ouid=1000 2024-10-10T12:48:24.305192+00:00 observium2 rsyslogd: child process (pid 3218) exited with status 1 [v8.2312.0] i have checked permisions -rwxrwxr-x 1 user user 3376 Feb 22 2024 syslog.php any assistance would be gratefully received

2 5

syslog entries
by Arnoldo Vidal Bravo 08 Oct '24

08 Oct '24

Hi, Every 5 minutes we are notified about the same messages sent by a device (repetitive messages). Is there a way to be notified only once a day? Or every 12 hours? example: [image: image.png] -- Saluda cordialmente

2 1

traps
by Arnoldo Vidal Bravo 08 Oct '24

08 Oct '24

Observium do not support traps? -- Saluda cordialmente

2 1

Enterprise Discord Channel - Can I get added?
by Chris Cottingham 03 Oct '24

03 Oct '24

Is there an Enterprise discord support channel for Observium? If so, can I get added to it? Enterprise license number: Bmaschke-26972681 Thanks! Chris Cottingham Systems + R&D | Apple Music 512-412-1082 ccottingham(a)apple.com

3 3

widgets
by jose.napoli＠neuralsoft.com 03 Oct '24

03 Oct '24

Can ! change the config of any widget or generate new? When clic in config show this: > $widget['widget_config']ajax/actions/edit_widget.inc.php:146 array()

3 9

footer is not showed on alert's email
by Arnoldo Vidal Bravo 02 Oct '24

02 Oct '24

Hi, Yesterday we upgrade the observium version (from 23.2.12520 to 24.8.13606), but we don't see the time when alert was generated. Would be good show (on email alert) the alert checker's name. i attach screenshots. observium 24.8.13606 [image: image.png] observium 23.2.12520 [image: image.png] Because the alert can be generated at time distinct of mail -- Saluda cordialmente

2 1

Can't see alerts.
by Bar Russo 30 Sep '24

30 Sep '24

Greetings. For some reason recently I can NOT see any alert status, if I press on 'Alerts' it is empty and doesn't show anything. Sometimes it's showing the alert for a second and then all of the alerts disappeared. I tried to reboot the Ubuntu VM and also tried to see some logs but couldn't handle it, still having this issue. I didn't change anything within the Ubuntu machine the Observium installed on so ain't got a clue what's happened. Maybe you'll be able to assist me please. Best regards, Bar Russo | Information Technology Phone: 03-9546064 Address: Ariel Sharon 8 blvd. Or-Yehuda Linkedin<https://www.linkedin.com/company/77639321/admin/> | Facebook<https://www.facebook.com/mgroup.mgar> | Mgrp.co.il [תמונה שמכילה גופן, גרפיקה, לוגו, עיצוב גרפי התיאור נוצר באופן אוטומטי]<https://www.mgar.co.il/>

1 0

Purchase multiple instances in one CC transaction
by ccollar＠voltagepark.com 20 Sep '24

20 Sep '24

Greetings, I'd like to purchase multiple instances (multiple systems, multiple DBs) of Observium Pro with one credit card transaction, and am wondering if this is possible, and if so how? Thanks!

2 1

Setting up alerts on received power
by Laurent CARON 19 Sep '24

19 Sep '24

Hi, I'd like to setup alerts on RX power levels of my optical interfaces (on juniper and cisco equipment). In the web interface, this value can be obtained @URL: /device/device=yy/tab=health/metric=dbm/id=xx/ I really can't figure how to properly build an alert checker on this. Did anyone already set it up ? Thanks

1 0

Sensor limit nominal and delta OIDs need different scaling
by Corwin Ziegler Hunts 18 Sep '24

18 Sep '24

Hi, We are trying to set appropriate limits for a frequency sensor. There are OIDs for the nominal frequency and the acceptable deviation from it. The problem is the nominal OID needs 0.1 scaling while the deviation OID needs 1 scaling (the measured value needs 0.1 scaling). Is there a way to handle this? We tried using 'limit_scale' but that applies the same scaling to both the nominal and delta limits. The specific device is a CyberPower ATS PDU. The OIDs are ePDU2SourceStatusSourceAFrequency, ePDU2SourceStatusSourceBFrequency, ePDU2SourceStatusNominalFrequency and ePDU2SourceConfigFrequencyDeviation. Corwin

1 0

API Error 500
by Nicolas Korten 18 Sep '24

18 Sep '24

Hello dear Observium Team, I'm trying to add a device using the API and get an error 500 message instead of the expected notice that the device is not respondig to snmp. > curl -u korten:secret https://observium.domain.net/api/v0/devices/ -X POST -d '{"hostname":"pe-lab02.domain.net", "snmp_community":"test", "ping_skip":"on"}' <h1>500 Internal Server Error</h1><h3>flight\Engine::_json(): Argument #2 ($code) must be of type int, string given, called in /opt/observium/libs/flight3/core/Dispatcher.php on line 86 (0)</h3><pre>#0 /opt/observium/libs/flight3/core/Dispatcher.php(86): flight\Engine->_json() #1 /opt/observium/libs/flight3/core/Dispatcher.php(50): flight\core\Dispatcher->runEvent() #2 /opt/observium/libs/flight3/Engine.php(113): flight\core\Dispatcher->run() #3 [internal function]: flight\Engine->__call() #4 /opt/observium/libs/flight3/core/Dispatcher.php(287): call_user_func_array() #5 /opt/observium/libs/flight3/Flight.php(143): flight\core\Dispatcher::invokeMethod() #6 /opt/observium/html/api/v0/includes/devices.inc.php(133): Flight::__callStatic() #7 [internal function]: api_add_device() #8 /opt/observium/libs/flight3/core/Dispatcher.php(250): call_user_func_array() #9 /opt/observium/libs/flight3/core/Dispatcher.php(237): flight\core\Dispatcher::callFunction() #10 /opt/observium/libs/flight3/Engine.php(508): flight\core\Dispatcher::execute() #11 /opt/observium/libs/flight3/core/Dispatcher.php(86): flight\Engine->_start() #12 /opt/observium/libs/flight3/core/Dispatcher.php(50): flight\core\Dispatcher->runEvent() #13 /opt/observium/libs/flight3/Engine.php(113): flight\core\Dispatcher->run() #14 [internal function]: flight\Engine->__call() #15 /opt/observium/libs/flight3/core/Dispatcher.php(287): call_user_func_array() #16 /opt/observium/libs/flight3/Flight.php(143): flight\core\Dispatcher::invokeMethod() #17 /opt/observium/html/api/v0/index.php(66): Flight::__callStatic() #18 {main}</pre> As far as I can see, the error is in: api/v0/includes/devices.inc.php at line 133: >Flight::json($json, '400'); should be: Flight::json($json, 400); Agree? Thank you and have a nice day, Nico -- Nicolas Korten Dipl.-Ing. Systemtechnik und Dienste/EDV komro GmbH Am Innreit 2 DE-83022 Rosenheim Telefon: +49 8031 365 7913 Telefax: +49 8031 365 7699 Mail: korten(a)komro.net / http://www.komro.net __________________________________________________________________________________________________________ Geschäftsführer: Dipl. Ing. Gert Vorwalder Vorsitz im Aufsichtsrat: Oberbürgermeister Andreas März Sitz der Gesellschaft: Rosenheim Registergericht: Traunstein, HRB-Nr. 10689 USt.-IdNr.: DE 188814299 Hinweise zur Verarbeitung Ihrer personenbezogenen Daten gem Art. 13 DSGVO: Verantwortlich für die Verarbeitung Ihrer personenbezogenen Daten im Rahmen des vorliegenden Kontakts ist die komro GmbH Weitere Informationen zur Verarbeitung Ihrer Daten, insbesondere zu den Ihnen zustehenden Rechten, können Sie unserer Homepage unter https://www.komro.net/datenschutz entnehmen oder auf jedem anderen Wege unter den o.g. Kontaktdaten bei uns erfragen.

4 7

Group section not working in Status Summary widget
by Ricardo Puig 16 Sep '24

16 Sep '24

Dear Observium Team, The group section in Status Summary widget is pointing to nowhere (javascript:void(0)) Regards.

1 0

NAT Counters Cisco
by Arnoldo Vidal Bravo 12 Sep '24

12 Sep '24

Hi. How can I get a NAT's sessions total from Cisco ASR-1002X? We get SNMP results by snmp v2 and Observium version is 23.8.12.912. I must enable NAT MIB, but ¿where is an example? NAT MIB can be enable after add the device? -- Saluda cordialmente

2 1

Hello.
by Bar Russo 12 Sep '24

12 Sep '24

I want to subscribe because I need some help with the metrics of the Observium. [cid:image001.png@01DB04FB.F42B1C50] בר רוסו | מערכות מידע מייל: barr(a)mgrp.co.il<mailto:barr@mgrp.co.il> קבוצת Mgroup | אריאל שרון 8, אור יהודה www.mgrp.co.il<http://www.mgrp.co.il>

2 2

Alert Checker association "Storage Description" major problem
by kalafus＠energotel.sk 10 Sep '24

10 Sep '24

Hello, Creating storage alert checker using entity association "Storage Description" renders page https://observium.xxx.sk/alert_checks/ totally unavailable (just blank whole page). Deleting that alert makes it work again. Looking for a solution...

3 4

Unix agent not working on non-default port
by ricardo＠banak.com 10 Sep '24

10 Sep '24

We have several devices behind a NAT that require using an agent_port other than 36602. Even though I have changed the port in the GUI, the poller seems to continue using the standard port. It seems to me that $device['attribs']['agent_port'] has not been populated. Running 24.9.13634 Pro on debian 12. Thank you. Ricardo Puig

2 2

The graphs for few network devices not getting displayed
by Renuka Arya 09 Sep '24

09 Sep '24

Hi Team! We are running Observium pro version Observium 24.6.13582(stable). Lookslike the memory,processor and network graphs are seeing a draw error. You can still the values beside but it wont draw the graphs. It says "Draw error"/nan I looked into the permissions for the rrd folders for these devices and did change a non-working one similar to a working one as root:observium but that did not fix the issue. I also tried deleting (which was not ideal) a device and adding it back but that did not work as well. Please guide! Thanks! Regards Renuka Arya

3 4

Incorrect sensor limits caused by duplicate unit conversion
by Corwin Ziegler Hunts 04 Sep '24

04 Sep '24

The definition for the temperature sensor on a CyberPower PDU (or UPS) environmental sensor accessory defines both "unit" and "limit_unit" as "F". This seems to cause the limit values to get converted (to Celsius) twice: first in "entity_limits_definition" using "limit_unit" and then in "discover_sensor_ng" using "sensor_unit" which is set from "unit". For us, the SNMP read limits of 59 and 90 F end up as -9.44 and 0.12 C on the sensor in Observium. This is on version r13629. Simply not setting "limit_unit" is a workaround if both the sensor and limit values use the same unit (maybe that is preferred when defining sensors?). If the units are different a proper fix is needed. Also, is this the preferred method for reporting this kind of issue? Corwin

2 3

How to add a device which only responds to ping/icmp?
by Thomas Stather 23 Aug '24

23 Aug '24

Hi How can i add a device which cannot (!) speak any snmp and only responds to ping/icmp requests? We have an Aruba wlan setup (Mobility Master and two Mobility Controllers) and i want to add the aps to Observium, so that they are monitored but only by ping/icmp. (The MM and the two MCs are already added to Observium, but i cannot see if one AP went offline or came back online again) The aps cannot speak any snmp when managed by the MM or MC, thats why it fails when i try to add one via ./add_device.php I appreciate any help :) Best, Thomas -- Thomas Stather IT Services VCP4, VCP6-DCV, VCP6.5-DCV Tel: +49 6221 486 628 Fax: +49 6221 486 561 Bevor Sie diese Mail ausdrucken, prüfen Sie bitte ob dies wirklich nötig ist. Umweltschutz geht uns alle an!

10 15

Observium doesn't show interfaces within VPRN on Nokia routers
by Tao Zhang 21 Aug '24

21 Aug '24

Hi Observium team, We are using Observium as a main tool to monitor our router interfaces and collect SNMP stats. We recently replaced our Juniper routers with Nokia SR 7750. We noticed that Observium doesn't work very well with Nokia routers. Observium can only show the interfaces in the master instance, not the interfaces within VPRN or VPLS instances (Nokia call those interfaces SAPs). To be able to see interfaces within VPLS or VPRN, we need to enable two other MIBs, TIMETRA-SAP-MIB and TIMETRA-VRTR-MIB. We are not sure how to enable those two MIBs. Do we need to add them manually? This is the MIBs enabled on the Nokia router (default). [cid:ece89bfc-3ae2-4dcd-9c7c-641c3978f803] Any suggestion is greatly appreciated. Thanks, Tao

1 1

Re: How to add a device which only responds to ping/icmp?
by Croene Jan (PZ Antwerpen) 21 Aug '24

21 Aug '24

Dear, We bought the license to monitor devices via ping-check (with the probe functionality). "Observium is designed to collect and display data from SNMP-capable devices, but not every device supports SNMP. In order to monitor non-SNMP capable devices, the probes system can be used to perform checks on non-SNMP devices". I am just wondering how we can add a device in observium that cannot handle snmp? ________________________________ Als u niet de beoogde ontvanger van deze email bent, lees onze disclaimer<https://www.politie.be/nl/maildisclaimer>. Si vous n'?tes pas le destinataire pr?vu de cet email, lisez notre disclaimer<https://www.politie.be/fr/maildisclaimer>. Wenn Sie nicht der beabsichtigte Empf?nger dieser email sind, lesen Sie unseren disclaimer<https://www.politie.be/de/maildisclaimer>. If you aren't the intended recipient of this email, read our disclaimer<https://www.politie.be/en/maildisclaimer>.

2 1

Observium stops displaying stats for all monitored hosts for a period of time
by Kevin Riahi 21 Aug '24

21 Aug '24

Hello Team, It seems Observium stops displaying stats for all (most) monitored hosts for a period of time and then back to normal.!!! I've attached a few screenshots. Has this behavior been documented in the past? If not what is the best way to debug this. Observium ver 24.8.13606 Running on a dedicated server. 12 Core Xeon Proc 64 GB RAM Raided SSD drives. Thank you Kevin Riahi

3 3

Running on a subdomain
by d.wiersma＠dw-its.nl 20 Aug '24

20 Aug '24

Hi, I want to run overservium on a subdomain. My main domain is https://dw-its.nl Is it possible to run in under observium.dw-its.nl?

2 1

Bandwidth alerts based on value in "Device Port Parsed Speed"
by Brad Bendy 14 Aug '24

14 Aug '24

Hi, Checked around and can't figure out a way to do this and don't see anything in mailing list about it. Is there a way to build alerts based on the bandwidth value we are setting this way? For example we have a description of "[600Mbit]" and then want to alert on 80% of this value for example. I don't see a way to do this as the test conditions are all the parameters from SNMP. Obviously can make up a checker and do the math manually and what not but would not auto adjust and I need 100+ of these created. Would anyone else find this helpful? Thanks

1 0