- observium - lists.observium.org

Discovery updates sensors on every run
by Niklas Larsson 07 Jan '19

07 Jan '19

Hi, replaced a Dell EqualLogic member and since then I get logs of sensor updates every time discovery is running. I can not see any changes though, snipped from attached output: > > Discover sensor: [class: temperature, device: eql.example.com, oid: > .1.3.6.1.4.1.12740.2.1.6.1.3.1.1071562282.2, index: 1.1071562282.2, > type: equallogic, descr: Backplane sensor 0, scale: 1, limits: (1, 2, > 45, 50), CURRENT: 24, , > > SQL[SELECT COUNT(`sensor_id`) FROM `sensors` > WHERE `poller_type`= 'snmp' AND `sensor_class` = > 'temperature' AND `device_id` = '38' AND `sensor_type` = 'equallogic' > AND `sensor_index` = '1.1071562282.2'] > ROWS[1] > SQL RUNTIME[0.00074983s] > > SQL[SELECT * FROM `sensors` WHERE `sensor_class` = 'temperature' AND > `device_id` = '38' AND `sensor_type` = 'equallogic' AND `sensor_index` > = '1.1071562282.2'] > ROWS[1] > SQL RUNTIME[0.00094700s] > Compare float numbers: "50" with "50", epsilon: "0.1", comparision: "0 > < 0.1", numbers: SAME > Compare float numbers: "45" with "45", epsilon: "0.1", comparision: "0 > < 0.1", numbers: SAME > Compare float numbers: "1" with "1", epsilon: "0.1", comparision: "0 < > 0.1", numbers: SAME > Compare float numbers: "2" with "2", epsilon: "0.1", comparision: "0 < > 0.1", numbers: SAME > Compare float numbers: "1" with "1", epsilon: "1.0E-5", comparision: > "0 < 1.0E-5", numbers: SAME > Compare float numbers: "0" with "0", epsilon: "1.0E-5", comparision: > "0 < 1.0E-5", numbers: SAME > > SQL[SELECT `attrib_value` FROM `entity_attribs` WHERE `entity_type` = > 'sensor' AND `entity_id` = '5230' AND `attrib_type` = 'sensor_addition'] > ROWS[0] > SQL RUNTIME[0.00034690s] > > SQL[UPDATE `sensors` set `sensor_mib` ='',`sensor_object` ='' WHERE > `sensor_id` = '5230'] > ROWS[0] > SQL RUNTIME[0.00050497s] > U > SQL[INSERT INTO `eventlog` > (`device_id`,`entity_id`,`entity_type`,`timestamp`,`severity`,`message`) > VALUES ('38','5230','sensor',NOW(),'6','Sensor updated: temperature > equallogic 1.1071562282.2 Backplane sensor 0')] > ROWS[1] > SQL RUNTIME[0.00040412s] What can I do? /niklas

3 5

Coriant G30 Monitoring
by Jay Hanke 06 Jan '19

06 Jan '19

Is anyone monitoring Coriant G30 devices in Observium?

2 3

19.1.9654 Front page map
by Luca Sasdelli 04 Jan '19

04 Jan '19

Hi all, does it exist any way to set a map area to be shown? Here I see a twice planisphere, while our targeted devices just cover the Europe only. Thanks and greets. Luca

1 0

BFD Support
by Klimek, Denis 03 Jan '19

03 Jan '19

Hi all, do you have anything on your roadmap regarding BFD support? CISCO-IETF-BFD-MIB, JUNIPER-BFD-MIB, BFD-STD-MIB etc pp Mit freundlichem Gruß Stadtwerke Norderstedt Denis Klimek Professional Network Engineer IP-Systemtechnik Tel: 040 / 521 04 - 1049 Mobil: 0151 / 652 219 06 dklimek(a)stadtwerke-norderstedt.de<mailto:dklimek@stadtwerke-norderstedt.de> www.stadtwerke-norderstedt.de<http://www.stadtwerke-norderstedt.de/>

1 0

Help
by thesa1nt＠mail.bg 03 Jan '19

03 Jan '19

Hi, I have Observium CE in my system and so far worked well. Now I added a two printers - Brother MFC-L8690CDW and Brother MFC-L9570CDW. But in "Printer Supplies" observium showed "Unknown" for Toner Cartbridge. After update to the newest version now show "Some Space" ( 1% ) and it isn't correct. Can you help me, please ? ------------------------------------- П.П. Искаш бизнесът ти да е и онлайн? Лесно е! Направи си сайт. В СуперХостинг.БГ пазят място за него! Виж повече на www.superhosting.bg. https://www.superhosting.bg/?utm_source=mail.bg&utm_medium=cpm&utm_content=…

2 1

Best procedure to delete device without losing graphs
by Klimek, Denis 03 Jan '19

03 Jan '19

Hi, is there any best procedure known to keep graphs data for a "Aggregated Graph" build with filters? (Port groups) Example: We have a Port Group called "Transit" which includes all ports labeled as Transit upstreams. Now we replaced the whole router which had a transit upstream. The new router does have it aswell. Now we want to keep the existing data for the Port Group Graph for historical reason, but we also want to delete the device in the database to keep Observium database clean. Currently we also have duplicate IP addresses for the configured IP addresses... on the old device and on the new one. I think if we delete the device we will lose the port label information which is important to build the port groups with the filters. Can someone advise something? Mit freundlichem Gruß Stadtwerke Norderstedt Denis Klimek Professional Network Engineer IP-Systemtechnik Tel: 040 / 521 04 - 1049 Mobil: 0151 / 652 219 06 dklimek(a)stadtwerke-norderstedt.de<mailto:dklimek@stadtwerke-norderstedt.de> www.stadtwerke-norderstedt.de<http://www.stadtwerke-norderstedt.de/>

3 3

Buildings in Front Page Map
by Philippe Laurent 02 Jan '19

02 Jan '19

What is the recommended method of showing buildings (provided by OpenStreetMap) in the front page map of the Observium interface?

2 5

Starline Busway Monitoring
by David Ross 02 Jan '19

02 Jan '19

Hello! I sent this question yesterday but got no response. Please reply as soon as possible. I've added monitoring to our Starline Busway CPMs (Critical Power Meters) and have added latest MIB to the Observium SNMP MIBs directory. However, I get very little to no monitoring data. Is the Starline MIB not supported by Observium? Please advise; thanks! Regards, *David W. Ross, Sr.* Sr. Lab Ops Engineer 50 Fremont St, 42nd Floor San Francisco, California 94105 415.589.4930 - O 415.926.3483 - C david.ross(a)salesforce.com <http://smart.salesforce.com/sig/david.ross//us_mb/default/link.html>

3 5

UBNT Gpon port Ufiber
by chott＠praha1.net 02 Jan '19

02 Jan '19

Hello team, There is new MIB for support UFiber OLT GPon ports, MIB from UBNT side https://drive.google.com/file/d/1F1BYUiLZF_ciGsZIgyMrsGkJTI_royg_/view Can you check version and update in Observium? Now UFiber show only "lo" "eth0" and "br0" Thank you Tom

1 1

help on Active directory authentication (nothing happens)
by Vincent Kwiatkowski 02 Jan '19

02 Jan '19

Hi All, I tried to make observium AD log in working during a few hours without any success, so I ask here for help^^ I took the ad example conf and edited some values. I used same kind of conf in antoher apache vhost, and it works fine. I also tried to find a good debug mode to help me with that, but nothing Is in the logs. I tried "url/debug", "url/debug=yes", I can only see "CACHE DISABLED. Disabled in config", but I don't see any message about failed authentication (after I entered my credentials, nothing happens, I come back to log in page) I also tried what is in this page ( https://docs.observium.org/config_options/#debugging-profiling-settings), but nothing happens in any log file. how can I enabled debug mode to help me with this authentication issue? In my win2k8 AD, the directory tree is as follow: Administrative (at the root) --> "Domain users" (where all the "human" users are) --> "Groups" (where all the groups are) --> "ServiceAccounts" (where the binddn user is) Here is the conf I have : $config['auth_mechanism'] = "ldap"; $config['auth_ldap_binddn'] = "cn=DNrequest,ou=ServiceAccounts,ou=Administrative,dc=example,dc=com"; $config['auth_ldap_bindpw'] = "password"; $config['auth_ldap_attr']['uid'] = "sAMAccountName"; $config['auth_ldap_attr']['uidNumber'] = "objectSid"; $config['auth_ldap_attr']['cn'] = "name"; $config['auth_ldap_attr']['dn'] = "distinguishedname"; $config['auth_ldap_objectclass'] = "person"; $config['auth_ldap_version'] = 3; $config['auth_ldap_server'] = "example.com"; $config['auth_ldap_port'] = 389; $config['auth_ldap_starttls'] = FALSE; $config['auth_ldap_prefix'] = "CN="; $config['auth_ldap_suffix'] = ",OU=Domain users,OU=Administrative,DC=example,DC=com"; $config['auth_ldap_group'] = array("CN=NE.Access,OU=Groups,OU=Administrative,DC=example,DC=com"); $config['auth_ldap_groupbase'] = "OU=Groups,OU=Administrative,DC=example,DC=com"; $config['auth_ldap_groupmembertype'] = "fulldn"; $config['auth_ldap_groupmemberattr'] = "member"; unset($config['auth_ldap_groups']); $config['auth_ldap_groups']['CN=NE.Access,OU=Groups,OU=Administrative,DC=example,DC=com']['level'] = 10; Thanks a lot in advance for you help! Vincent Kwiatkowski Operations&Infrastructure - System Team • Itiviti Production System Engineer Direct: +33 1 44 50 25 45 vincent.kwiatkowski(a)itiviti.com 21 Boulevard Haussmann <https://maps.google.com/?q=21+Boulevard+Haussmann+75009+Paris,+France&entry…> 75009 Paris, France <https://maps.google.com/?q=21+Boulevard+Haussmann+75009+Paris,+France&entry…> Phone: +33 1 49 95 30 00 -- Visit: itiviti.com <https://www.itiviti.com/> / ullink.com <https://www.ullink.com/> » Read the latest news from Itiviti » <http://www.itiviti.com/news/> *The information contained in or attached to this email is strictly confidential. If you are not the intended recipient, please notify us immediately by telephone and return the message to us.* * * *Email communications by definition contain personal information. The ITIVITI group of companies (of which ULLINK forms part) is subject to European data protection regulations. ULLINK’s Privacy Policy is available at www.ullink.com <http://www.ullink.com/>. ULLINK expects the recipient of this email to be compliant with ULLINK’s Privacy Policy and applicable regulations. Please advise us immediately at dataprotection(a)ullink.com <mailto:dataprotection@ullink.com> if you are not compliant with these.*

3 3

Eaton Network Card-MS on Observium Pro
by Tommy Nevtelen 01 Jan '19

01 Jan '19

Having an an issue with observium pro showing less stuff and stuff looking broken after updating the firmware a couple of versions on Eaton Network Card-MS. The interface names look wrong and seeing stuff such as: Output Source Status deleted: xupsOutputSource xupsOutputSource.3.3 Output Source Battery Status Status deleted: xupsBatteryAbmStatus xupsBatteryAbmStatus.3.3 Battery Status Inverter Off Status Alert: ups1.lndo.kambi.com Inverter Off entered ALERT state: No (previous: Yes) According to the changelog there has been a mib change but I'm not sure when that happened. Changelog of the firmware: http://pqlit.eaton.com/ll_download_bylitcode.asp?doc_id=34077 All firmwares http://powerquality.eaton.com/Support/Software-Drivers/Downloads/connectivi… /T **

5 13

Happy New Year and goodbye PHP5!
by Markus Klock 01 Jan '19

01 Jan '19

This is a happy day guys! PHP5 is no longer supported and no security fixes will be made for it any longer. If you have not already thrown it out, now its the time to get on the PHP7-train! (but not PHP7.0 which also is end of support) [image: image.png]

1 0

Re: [Observium] portpercent colors
by Thibault Richard 26 Dec '18

26 Dec '18

Hello, No info about this ? Best Regards Thibault De : Thibault Richard <thibs(a)thibs.com> Envoyé : jeudi 20 décembre 2018 16:43 À : 'Observium' <observium(a)observium.org> Objet : portpercent colors Hello, Im using the (really cool) feature offered by the module portpercent Im using it to have a graphical view of the traffic type on my core switch stack Apparently per defaults there is only 5 different colors On this example, « Core-Firewall » got the same color as Core-ISCSI Is there a way to specify a color per element ? Best Regards Thibault

2 1

LDAP config
by Jason La 20 Dec '18

20 Dec '18

To Observium community, I'm having issue configuring LDAP on the config.php, wasn't able to get it to work. Is it possible someone can share a working config in the config.php for LDAP? Thank you so much in advance. Jason La | Lead Systems Engineer, Portware Infrastructure Portware, A FactSet Company 99 Park Ave, 16th Floor New York, NY 10016 (212) 370 8353 www.factset.com<http://www.factset.com/>

2 1

portpercent colors
by Thibault Richard 20 Dec '18

20 Dec '18

Hello, I'm using the (really cool) feature offered by the module portpercent I'm using it to have a graphical view of the traffic type on my core switch stack Apparently per defaults there is only 5 different colors On this example, < Core-Firewall > got the same color as "Core-ISCSI" Is there a way to specify a color per element ? Best Regards Thibault

1 0

Storage Aggregate Bytes Stacked problem in r9645
by Richard Wigzell 20 Dec '18

20 Dec '18

Hello, We have a number of Groups of type Storage in order to see the Aggregate Bytes Stacked graph for that set of storage, this has been working well but when creating new groups in r9645 (possible before) the graph is blank / will not display. Any suggestions on diagnosing this would be appreciated. [cid:image001.png@01D49675.964A51A0] Regards [cid:image001.jpg@01CE9215.D39244B0]<https://www.it.ox.ac.uk/> Richard Wigzell Technical Lead, Storage Platforms IT Services | University of Oxford 13 Banbury Road, Oxford OX2 6NN T: 01865 616282 www.it.ox.ac.uk<https://www.it.ox.ac.uk/>

2 5

Cisco CBQoS - Alert Checks
by Reisner Martin 20 Dec '18

20 Dec '18

Good Morning! Can somebody help me out how to create a Alert Check for Cisco CBQoS Classes? I want to check if a dedicated Cisco CBQoS Class Bandwidth is exceeded. Thank you in advance! With kind regards Martin PS.: Im using Observium Professional 18.10.9472 (16th October 2018).

2 1

Quick filters highlight not working
by Johann Mallet 19 Dec '18

19 Dec '18

Hello, On my "Port" tab in a device page, my "Quick Filters" menu seems be not have highlight when you select one or more options. The menu remains "blank" after pape reload with filter(s) apply. Before : [image: image.png] After select "Hide shutdown" and page reload with filter : [image: image.png] Filter apply and we can see URL with filter parameter: https://domaine.tdld/device/device=13/tab=ports/view=basic/filters=eyJkZWxl… Only visible change : it's when you select "Hide all", menu text change for "Reset all". I use last SVN update. I have try new installation for test, it's the same result. Johann

1 0

Increase polling interval to 10 minutes?
by Gordon Cheng (gocheng) 18 Dec '18

18 Dec '18

I have a few Cisco Nexus switches with over 1k ports/interfaces. Since it takes quite some time for them to finish polling, is there any way we can increase the polling interval from default 5 minutes to say 10 minutes? Can we just increase the interval for these few devices, or we have to increase it for all? Any pointer or documents showing how it can be done? I'm a bit new to Observium. Thanks. - Gordon

4 3

Windows LLDP,LLTD,SNMP Auto-Discovery
by Connary, Scott 15 Dec '18

15 Dec '18

Hello. I am trying to get our environment to be completely auto-discovered. Our Windows 10 boxes will not auto-discover. I have read that this is just something that you have to deal with. Has anyone found a way to make this happen? Thank you.

3 2

Win2019 Server called Win 2016
by ron＠rjr-services.com 15 Dec '18

15 Dec '18

Howdy Adam, et al., So I deployed a couple of Win2019 servers yesterday and of course added them to my monitoring.... and they are being shown as Win 2016 servers. Checked the poller debug of WMI and that's correctly indicating... but I suspect Microsoft's choice to still call it NT 6.3 may be throwing things off. From module system: o sysDescr Hardware: Intel64 Family 6 Model 63 Stepping 2 AT/AT COMPATIBLE - Software: Windows Version 6.3 (Build 17763 Multiprocessor Free) From module os: o OS Poller OS o Hardware Intel x64 o Version Server 2016 (NT 6.3) o Features Multiprocessor From module wmi: WMI Poller: Windows version updated: Server 2019 Standard (10.0.17763) Intel(R) Xeon(R) CPU E5-2643 v3 @ 3.40GHz I'm not even going to try to hack code on this one. ...Ron -- This message has been scanned by E.F.A. Project and is believed to be clean.

2 4

update fail to 9643
by Laszlo Nemeth 14 Dec '18

14 Dec '18

Hello I tried to upgrade from to latest (9643) version. The svn update was fine, but the discovery.php give me this error: ./discovery.php -u PHP Parse error: syntax error, unexpected '[' in /opt/observium/includes/defaults.inc.php on line 383 What i did wrong? :) Thanks Br Laszlo

3 4

Possible pseudowire bug - Backup PSW's classed as DOWN/ALERT, results in broken PW alerting
by Andrew Lemin 14 Dec '18

14 Dec '18

Hi List, Just a quick one to check that I do not need to configure something extra for this to work? We have lots of Pseudowire's configured using IOS-XR, IOS-XE and IOS, and these all show in Observium with the pwID, and the Local and Remote details (so Observium is correctly matching the stanzas across the two endpoints as being the same service) which is awesome :) However when configuring 'Backup' Pseudowire, the standby/backup Pseudowire is shown as 'Down' and 'Alert' in Observium? This is really confusing for support staff who do not understand if down/alert means something is wrong or not, and as such we are currently unable to monitor any pseudowire and have all alerts disabled for them :( The attached image shows an example, of how all the PWs to the secondary device are reported as down and in an alert state! They are all down but in the normal state as standby/backup pseudowires. Below shows the output for the PW states, and it can be seen that a status of 'sec' and 'SB' is provided for Standby/Backup (the Pseudowire is explicitly configured with a 'Backup' path etc) pseudowires. BYF-CGW-2#show xconnect all Legend: XC ST=Xconnect State S1=Segment1 State S2=Segment2 State UP=Up DN=Down AD=Admin Down IA=Inactive SB=Standby HS=Hot Standby RV=Recovering NH=No Hardware XC ST Segment 1 S1 Segment 2 S2 ------+---------------------------------+--+---------------------------------+-- UP pri ac Po20.339:339(Eth VLAN) UP mpls <remote-rt-1-ip>:339 UP IA sec ac Po20.339:339(Eth VLAN) UP mpls <remote-rt-2-ip>:339 SB UP pri ac Po20.341:341(Eth VLAN) UP mpls <remote-rt-1-ip>:341 UP IA sec ac Po20.341:341(Eth VLAN) UP mpls <remote-rt-2-ip>:341 SB UP pri ac Po20.348:348(Eth VLAN) UP mpls <remote-rt-1-ip>:348 UP IA sec ac Po20.348:348(Eth VLAN) UP mpls <remote-rt-2-ip>:348 SB So the question I guess is, do the OIDs show the third status of 'SB' (or the 'XC' and 'ST' states of, 'IA' & 'sec' = Standby/Backup etc) so we can have something like; 'UP' = Green (Up), 'SB' = Amber (Up), 'DN' = Red (Down/Alert)? Without this pseudowire alerting and state monitoring is broken :( As always, Thanks for all your time and effort with Observium Kind regards, Andy.

4 5

Re: [Observium] nut-snmp
by Ron Marosko 13 Dec '18

13 Dec '18

3 2

Host Description in Notifications
by Brian Downey 12 Dec '18

12 Dec '18

Hi All, Has anyone else experienced trouble getting the Description field (Host Properties -> Device Settings) to appear in notifications? Looking at the notification templates there is an "ENTITY_DESCRIPTION" field, but it doesn't seem to get used in our installation; i.e. the alerts simply show "Entity" and then "Condition" skipping it entirely. The descriptions are filled in and show in the Observium interface. As a shot in the dark I tried to customize the template per the README in the template directory & experimented with "DEVICE_DESCRIPTION", but also no bueno. -Brian

1 0

syslog filters
by Arnoldo Vidal Bravo 11 Dec '18

11 Dec '18

Hi, I'm using feature syslog on observium 18.10.9472, but unable it filters for messages. $config['syslog']['filter'][] = '%%10DRV_DEM/5/FAN WARNING(t):- 1 - Info: Fan4 is ERROR now.'; i restarted rsyslog service The syslog read entries on a mysql table. somebody can helpme? -- Saluda cordialmente

2 1

nut-snmp
by Roland Hill 11 Dec '18

11 Dec '18

Hi list, Not a critical thing... Just wondered if anyone had done any config to get the nut-snmp "package" to be discovered in Observium. I'm running Observium CE 18.9.9420. I found a this on the net, https://raymondjdouglas.com/blog/2018/ups-monitoring/ which gave me hope that this would be possible. Many thanks. -- Regards, Roland

1 0

Re: [Observium] Observium not fully updating
by tech＠tempehgirl.com 09 Dec '18

09 Dec '18

? epel-release-latest-6.noarch.rpm ? svn ? remi-release-6.rpm ? observium ? trunk ? html/includes/jpgraph ? includes/discovery/functions.inc.php.orig M includes/discovery/functions.inc.php > What is the output of "svn status" ?> > adam. >> >> On 2018-12-08 16:36:06, tech--- via observium >> wrote: >> >> I'm running Observium on CentOS 6.10. The PHP version on the machine >> is currently 7.0.16. >> >> When I run the "svn update" command it completes correctly. However, >> when I run "discovery.php -u", I get the following error: >> >> PHP Parse error: syntax error, unexpected end of file in >> /opt/observium/includes/discovery/functions.inc.php on line 164 >> >> I tried with both the stable and current versions, but get the same >> results. Thank you for any help. >>

2 2

Observium not fully updating
by tech＠tempehgirl.com 08 Dec '18

08 Dec '18

I'm running Observium on CentOS 6.10. The PHP version on the machine is currently 7.0.16. When I run the "svn update" command it completes correctly. However, when I run "discovery.php -u", I get the following error: PHP Parse error: syntax error, unexpected end of file in /opt/observium/includes/discovery/functions.inc.php on line 164 I tried with both the stable and current versions, but get the same results. Thank you for any help.

2 1

Observium client for windows?
by Connary, Scott 08 Dec '18

08 Dec '18

Observiums biggest weakness is its inability to auto-discover windows. LLDT needs to be integrated into the design. Or being able to piggy back off of Symantec or bigfix for data.

1 0

SVN not updating
by Dash Brousseau 08 Dec '18

08 Dec '18

Past 2 months I cant seem to update my subscription (root@pla01netmon) - /opt/observium ->svn update Updating '.': At revision 9642. (root@pla01netmon) - /opt/observium ->svn update -r 9642 Updating '.': At revision 9642. But on web GUI It states Observium 18.10.9472 (16th October 2018) Dash This message contains information which may be confidential and privileged. Unless you are the intended addressee (or authorized to receive for the intended addressee), you may not use, copy or disclose to anyone the message or any information contained in the message. If you have received the message in error, please advise the sender by e-mail then delete the message immediately. Francais: http://www.fundserv.com/fr/company/disclaimer<http://www.fundserv.com/francais/legal/disclaimer_email_ib.shtml>

3 4

Observium doesn`t send syslog alerts via email
by Jan Horacek 07 Dec '18

07 Dec '18

Hi guys, I`m experiencing issues when I`m not receiving emails from syslog alerters. I have just a simple alerter which is matching and I`m able to see them in syslog alert log, but emails are not going. I was trying to generate test_alert and email has been delivered. Any tips and tricks? thanks Jan

2 2

wkhtmltopdf
by Eric W. Bates 07 Dec '18

07 Dec '18

I'm trying to generate a report with wkhtmltopdf. This is a command line tool which inputs a URL and outputs a PDF. How do I compose an Observium URL which includes authentication? Everything I try simply renders the "Please log in:" page. -- Clark 159a, MS 46 508/289-3112

2 2

Device status changed to Down due to SNMP timeout
by Ming Wong, CLSA 07 Dec '18

07 Dec '18

Dear Observium, I am running the professional edition of Observium. Due to snmp timeout, some devices are considered to be "down" intermittently. I have tried to tweak the snmp timeout but it still happen. My question is: can I use ping only, and ignore snmp timeout to detect device up/down ? Thanks, Ming The content of this communication is intended for the recipient and is subject to CLSA Legal and Regulatory Notices. These can be viewed at https://www.clsa.com/disclaimer.html or sent to you upon request. Please consider before printing. CLSA is ISO14001 certified and committed to reducing its impact on the environment.

2 1

Possibility of disabling a health status
by Patrick Kambach 04 Dec '18

04 Dec '18

Dear Everybody, we have a couple of foundry switches (with only a single power supply) in use and with the "newest" version, we see an alarm under statuses. Is it possible to ignore / disable the health check for e.g. the 2nd power supply? BR, Patrick

2 2

Alert Checkers background not adjusting to Custom OID
by Pieter De Wit 04 Dec '18

04 Dec '18

Hey Guys, More a feature request (?) than anything else but I have noticed that the alert checkers background changes to match the state for "normal" OIDs but for custom OIDs it stays grey ? [image: Screen Shot 2018-12-04 at 10.04.22 AM.png] Thanks, Pieter

3 4

Stacking custom OIDs
by Pieter De Wit 03 Dec '18

03 Dec '18

Hey Guys, Is there a way to make a custom graph that shows various custom OIDs ? Thanks, Pieter

1 0

Dell Compellent DiskFolderSUTotalSpace
by Richard Wigzell 30 Nov '18

30 Nov '18

Hello all, Would it be possible to have the following two OIDs displayed for our Dell Compellent arrays. scDiskFolderSUTotalSpace<http://www.circitor.fr/Mibs/Html/C/COMPELLENT-MIB.php#scDiskFolderSUTotalSp…> 1.3.6.1.4.1.16139.2.32.1.3 Disk Folder Storage Usage total space, in GB OBJECT-TYPE Unsigned32<http://www.circitor.fr/Mibs/Html/S/SNMPv2-SMI.php#Unsigned32> scDiskFolderSUUsedSpace<http://www.circitor.fr/Mibs/Html/C/COMPELLENT-MIB.php#scDiskFolderSUUsedSpa…> 1.3.6.1.4.1.16139.2.32.1.4 Disk Folder Storage Usage used space, in GB OBJECT-TYPE Unsigned32<http://www.circitor.fr/Mibs/Html/S/SNMPv2-SMI.php#Unsigned32> Preferable together on the same graph - to let us know how much space has been used. On our arrays the sub object .2 is the only one to return a value. iso.3.6.1.4.1.16139.2.32.1.4.1 = Gauge32: 0 iso.3.6.1.4.1.16139.2.32.1.4.2 = Gauge32: 43434 iso.3.6.1.4.1.16139.2.32.1.3.1 = Gauge32: 0 iso.3.6.1.4.1.16139.2.32.1.3.2 = Gauge32: 84496 we are doing this with the custom OID function at the moment but it's a bit clunky as it returns in Gb so 82TB comes out as 82k Gb for example, and they are separate graphs. [cid:image001.png@01D488A7.3F599B20] If you need access to a device or more info please let me know as we would be happy to help. Regards [cid:image001.jpg@01CE9215.D39244B0]<https://www.it.ox.ac.uk/> Richard Wigzell Technical Lead, Storage Platforms IT Services | University of Oxford 13 Banbury Road, Oxford OX2 6NN T: 01865 616282 www.it.ox.ac.uk<https://www.it.ox.ac.uk/>

1 0

Support for Starline Busway CPMs
by David Ross 29 Nov '18

29 Nov '18

Hello! I've added monitoring to our Starline Busway CPMs (Critical Power Meters) and have added latest MIB to the Observium SNMP MIBs directory. However, I get very little to no monitoring data. Is the Starline MIB not supported? Please advise; thanks! Regards, *David W. Ross, Sr.* Sr. Lab Ops Engineer 50 Fremont St, 42nd Floor San Francisco, California 94105 415.589.4930 - O 415.926.3483 - C david.ross(a)salesforce.com <http://smart.salesforce.com/sig/david.ross//us_mb/default/link.html>

1 0

Poller Time
by hermes.martinez＠pueblobonito.com.mx 29 Nov '18

29 Nov '18

Hi, Does Anyone can help me to change the poller time of 5 min to 10 min, I'm not sure that is this the valor, but I tried change the number 5 to 10 but observium stops draws graphs, Does anybody can tell me how can i do this change, please? */5 * * * * root /opt/observium/poller-wrapper.py 8 >> /dev/null 2>&1 Regards! --- El software de antivirus Avast ha analizado este correo electrónico en busca de virus. https://www.avast.com/antivirus

2 1

Missing customers
by Eric W. Bates 26 Nov '18

26 Nov '18

I've labeled a number of our ports as "Cust: somebody", but not all appear on the Port --> Customers page. All the "Cust" labeled ports are on a pair of Junipers and most of them work, but a few are skipped (4 out of 11 are skipped). With debug enabled on the poller, I can see the 'ifalias' containing the Cust string: ifAlias.519 = Cust: WHRC I can also see various other OID's for interface ID 519: ifDescr.519 = ge-1/0/3 ifType.519 = ethernetCsmacd ifOperStatus.519 = up ifName.519 = ge-1/0/3 etc.. Running version 18.10.9472 (stable) thanks for your time. -- Clark 159a, MS 46 508/289-3112

1 0

Change Custom Locations for All Entities
by Josh Williams 26 Nov '18

26 Nov '18

Hello Everyone, I need to change the custom location string of every device. Does anyone know of an easier way of doing this, other than through the web GUI? I tried changing to location column under the device_locations table but that doesn't work. My assumption is that I would just make changes somewhere in the Observium database but I can't seem to find where the custom location data is stored. Any Ideas?

1 0

Searching Issue using Normal user account
by Andres 26 Nov '18

26 Nov '18

Hi Guys, After updated to the last version, I have a issue when I do a port seach using a Normal Account. In older versions i could seach for an interface port description but not now. I realize that it is only possible if I add Ports individually, but not if I only add devices. Any Suggestions? [image: image.png]

1 0

No neighbours shown for Edgeos Devices
by Henry Möller 22 Nov '18

22 Nov '18

3 4

A general questions on apps vs sniped extend ?
by Jonas Karlsson 22 Nov '18

22 Nov '18

Hi, I am new to observium and I am trying to learn the "system". Last week I developed a "app" that shows some status. The client side was super simple but it was somewhat cumbersome on the serverside (find all files to update and definitions etc). This week I tried to use snmpd extend to display the same information. This was super simple both on the client and on the server side (adda custom oid) and it works with alerts! My question is therefore in what circumstances are the "apps" useful? At least for my simple example I did not find any benefits of apps over using snmpd extend and a custom OID. Specially as configuring an app is more cumbersome (on the server side). -- Jonas Karlsson Senior Research Engineer Karlstad University SE-651 88 Karlstad, Sweden 📞 +46 54 700 15 64 📞 +46 70 672 06 20 💬 karlsson.karl.jonas 🗝 0x88765911B284F3A6

2 1

Observium doesn`t shows cbqos module
by Jan Horacek 21 Nov '18

21 Nov '18

Hi guys, I don`t know what`s happened but observium stopped shows flags like CBQOS and if I search for it I don`t see any port marked as CBQOS. nor IPv4, etc... If I`ll do discovery or poller for module cisco-cbqos I`m receiving data from device, just webinterface doesn`t show them. Do you know where could be an issue and how to fix? Thanks Jan

2 9

db error
by Tim Schmidt 20 Nov '18

20 Nov '18

For some reason, I've started receiving "DB Error 2002: No such file or directory" on my Observium installation. Weird thing was that it was literally right in the middle of using the web interface when the error started popping. I've restarted the VM and checked disk space and all looks good. root@tcgobs /opt/observium# ./discovery.php -h none MIB search path: /opt/observium/mibs Cannot find module (LM-SENSORS-MIB): At line 0 in (none) DB Error 2002: No such file or directory Ran the above command line discovery and got this. Not sure what's going on. Any help would be appreciated. Thanks. Tim

2 1

Alert checkers on apps?
by Jonas Karlsson 20 Nov '18

20 Nov '18

Hi, Sorry for a possible noob question but is it possible to create alerts on values reported by the applications system? -- Jonas Karlsson Senior Research Engineer Karlstad University SE-651 88 Karlstad, Sweden 📞 +46 54 700 15 64 📞 +46 70 672 06 20 💬 karlsson.karl.jonas 🗝 0x88765911B284F3A6

1 0

Dashboards
by David Jesus Maturano Sanchez 19 Nov '18

19 Nov '18

Guys. Should the dashboard functionalityworking right now? When I click in any of them, it simply does’t do anything, and obviously doesn’t show anything. Please kindly let me know. Regards. David.

4 14

Contact for Device Type
by noclab 19 Nov '18

19 Nov '18

Hello, Is it possible to add a contact, to get emails only for specific type devices listed under Power? Thanks in advanced Br José

1 0