- observium - lists.observium.org

test
by Adam Armstrong 05 Oct '18

05 Oct '18

test

3 2

test
by Mike Stupalov 02 Oct '18

02 Oct '18

ignore mail -- Mike Stupalov Observium Limited, http://observium.org

2 1

empty poller wrapper history
by Tomasz Karczewski 02 Oct '18

02 Oct '18

Hi, After update poller wrapper history has stopped drawing poller wrapper history. I attached screen. Thanks for response. Tomasz Karczewski Administrator Sieci <mailto:tkarczewski@man.olsztyn.pl> tkarczewski(a)man.olsztyn.pl <http://www.man.olsztyn.pl> http://www.man.olsztyn.pl <http://www.uwm.edu.pl> http://www.uwm.edu.pl tel. (89) 523 45 55 fax. (89) 523 43 47 Ośrodek Eksploatacji i Zarządzania Miejską Siecią Komputerową OLMAN w Olsztynie Uniwersytet Warmińsko-Mazurski w Olsztynie

3 8

apps
by Arnoldo Vidal Bravo 01 Oct '18

01 Oct '18

hi, i can't do it show apps menu or enable it, please help -- Saluda cordialmente

2 2

make selinux enforcing again
by David Pinkerton 01 Oct '18

01 Oct '18

As Red Hat consultant it makes me sad to see the first instruction to install software is to disable SELinux. It really isn't that hard to learn. My observium installation (on RHEL 7) Assuming Observium is installed in /opt/observium # ensure semange is installed yum install policycoreutils-python # set policy to allow apache to write to observium directories # this could be restricted to read-only on all except rrd & logs. semanage fcontext -a -t httpd_sys_rw_content_t "/opt/observium(/.*)?" # apply policy restorecon -R -v /opt/observium <http://apac.redhat.com/>

5 5

Open Street Map Leaflet
by Pieter De Wit 01 Oct '18

01 Oct '18

Hey Guys, This is a cosmic "issue" but an annoying one for us, I do understand that it won't effect a lot of people. We have systems in Fiji that we monitor and one of them happen to be at location: -16.84368611 -179.96583333 Most of the other systems are located "to the left" which happens to be across the 180 degree mark - or the line where -179.99999 and 179.99999 are next to each other. The problem is the map doesn't like to display this, since it displays either one, depending on where you are zoomed into. The "overview map" also shows the entire world, since the data is spread from 179 -> -179 Is there an easy way to fix this ? Thanks !

1 0

Proposed remote install for install script
by Pieter De Wit 01 Oct '18

01 Oct '18

Hey Tom :) Here is my 10 min hack to this: # diff observium_installscript.sh orig_observium_installscript.sh 9,47d8 < function remoteagentinstall { < echo -e "\nPlease enter the remote host you would to install to:${NC}" < read remote_srv < echo -e "Please enter the username for ${remote_srv}:${NC}" < read remote_user < echo -e "${GREEN}Installing additional packages...${NC}" < ssh -Cl ${remote_user} ${remote_srv} "apt-get -qq install -y xinetd snmpd libwww-perl libsnmp-extension-passpersist-perl" < scp /opt/observium/scripts/observium_agent_xinetd ${remote_user}@ ${remote_srv}:/etc/xinetd.d/observium_agent_xinetd < ssh -Cl ${remote_user} ${remote_srv} "service xinetd restart" < scp /opt/observium/scripts/observium_agent ${remote_user}@ ${remote_srv}:/usr/bin/observium_agent < ssh -Cl ${remote_user} ${remote_srv} "mkdir -p /usr/lib/observium_agent /usr/lib/observium_agent/scripts-available /usr/lib/observium_agent/scripts-enabled" < scp -r /opt/observium/scripts/agent-local/* ${remote_user}@ ${remote_srv}:/usr/lib/observium_agent/scripts-available < ssh -Cl ${remote_user} ${remote_srv} "chmod +x /usr/bin/observium_agent && \ < ln -sf /usr/lib/observium_agent/scripts-available/dmi /usr/lib/observium_agent/scripts-enabled && \ < ln -sf /usr/lib/observium_agent/scripts-available/apache /usr/lib/observium_agent/scripts-enabled && \ < ln -sf /usr/lib/observium_agent/scripts-available/mysql /usr/lib/observium_agent/scripts-enabled" < scp /opt/observium/scripts/distro ${remote_user}@ ${remote_srv}:/usr/bin/distro < ssh -Cl ${remote_user} ${remote_srv} "chmod +x /usr/bin/distro" < scp /opt/observium/scripts/ifAlias_persist ${remote_user}@ ${remote_srv}:/usr/bin/ifAlias_persist < ssh -Cl ${remote_user} ${remote_srv} "chmod +x /usr/bin/ifAlias_persist" < < echo -e "${GREEN}Reconfiguring ${remote_srv} snmpd${NC}" < < snmpcommunity="$(< /dev/urandom tr -dc _A-Z-a-z-0-9 | head -c${1:-15};echo;)" < < echo "agentAddress udp:0.0.0.0:161" > /tmp/snmpd.conf < echo "view all included .1" >> /tmp/snmpd.conf < echo "rocommunity $snmpcommunity" >> /tmp/snmpd.conf < echo "extend .1.3.6.1.4.1.2021.7890.1 distro /usr/bin/distro" >> /tmp/snmpd.conf < echo "pass_persist .1.3.6.1.2.1.31.1.1.1.18 /usr/bin/ifAlias_persist" >> /tmp/snmpd.conf < scp /tmp/snmpd.conf ${remote_user}@${remote_srv}:/etc/snmp/ < ssh -Cl ${remote_user} ${remote_srv} "service snmpd restart" < < echo -e "${GREEN}Adding ${remote_srv} to Observium${NC}" < /opt/observium/add_device.php ${remote_srv} $snmpcommunity < echo -e "${GREEN}DONE! UNIX-agent is installed and ${remote_srv} is now monitored by Observium${NC}" < < } < 133,134c94 < echo "5. Remotely Install the UNIX-Agent (snmpd-config will be overwritten)" < echo -n "(1-5):" --- > echo -n "(1-4):" 138,141d97 < exit 1 < fi < if [ $observ_ver = 5 ]; then < remoteagentinstall Tested on a single machine - for now :) Cheers !

2 1

Install script for agent to run without /opt/observium
by Pieter De Wit 30 Sep '18

30 Sep '18

Hey Guys, Would it be possible to add the option do an agent only install to the install script? One that doesn't need /opt/observium and installs all the nice /usr/bin/distro etc utils :) The current script bails on : cp: cannot stat '/opt/observium/scripts/observium_agent_xinetd': No such file or directory Thanks !

2 3

How I did it (?)
by Luca Sasdelli 29 Sep '18

29 Sep '18

Hi all, I've got some multi-WAN firewall checks from outside, and although Observium refuses an already existing SNMP SysName by adding a secondary WAN link, I've got one that has three WANs on the same firewall, without claiming anything. Does it exist a way to add an already existing SysName device, with a different name (and IP)? Thanks! Luca

1 0

remote syslog
by Arnoldo Vidal Bravo 28 Sep '18

28 Sep '18

hi. where i can config a remote storage of syslogs? -- Saluda cordialmente

1 0

Alerting on customer OID
by John Morris 28 Sep '18

28 Sep '18

Hello all Im after some help, I have created custom oid, and these are working and displaying info. I am trying to get the alerts to check the status of the oid. Ive added a custom oid checker Under association, I am selecting device, and the ip of the device. It then shows all the custom oid for the device. I have then tried by adding AND Custom OID numberical oid equals (The oid) [cid:image001.png@01D45723.A78685B0] But then it doesn’t list the custom oid, and shows no associations. Basically it is checking an SBC and if the status is 2, then its active, and if it shows 3 it is in standby. I want to create an alert that if the value changes from 2 to 3 it sends an alert. What am I doing wrong? Many Thanks John Morris Cloud Specialist

3 4

Not able to add checker
by Shekhar Basnet 28 Sep '18

28 Sep '18

Hello, I am trying unsuccessfully to add a checker. I just cannot find a submit button in the add checker page. Am I doing this incorrectly? I have attached a screenshot of the add checker page. My Observium CE version: 18.9.9413 (2nd September 2018) My permission level: THIS USER HAS FULL ADMINISTRATIVE ACCESS Thanks, Shekhar -- DISCLAIMER: This email message is for the sole use of the intended recipient(s) and may contain confidential and privileged information. Any unauthorized use or disclosure is prohibited. If you are not the intended recipient, please contact the sender by reply email and destroy all copies of the original message. IRS CIRCULAR 230 DISCLOSURE: Any U.S. tax advice contained in this communication (including any attachments) is not intended or written to be used, and cannot be used, for the purpose of (i) avoiding penalties under the Internal Revenue Code or (ii) promoting, marketing or recommending to another party any transaction or matter addressed herein.(FR08-i203d)

3 3

Customize Graphs on Observium
by Kaustubh Parthasarthy, CLSA 27 Sep '18

27 Sep '18

Hi Team, We were trying to do some customizations on the graphs that generate from Observium. We did find that the graph.php and graph-realtime.php are the 2 scripts which get referenced for plotting graphs. We need to know, how these 2 graphs are being referenced ? Kaustubh Parthasarthy Analyst, Production Management Group D +91 20 6646 8625 | M +91 989 284 4625 | T +91 20 6646 8888 4/F, C-Wing, Panchshil Tech Park-1, Yerawada, Pune 411006, India [:1. Social Media Icons:CLSA_Social Media Icons_linkedin.png]<https://hk.linkedin.com/company/clsa>[:1. Social Media Icons:CLSA_Social Media Icons_twitter.png]<https://twitter.com/clsainsights?lang=en>[:1. Social Media Icons:CLSA_Social Media Icons_youtube.png]<https://www.youtube.com/channel/UC0qWp_lLnOcRYmBlCNQgZKA>[:1. Social Media Icons:CLSA_Social Media Icons_facebook.png]<https://www.facebook.com/clsacommunity/> clsa.com<https://www.clsa.com/> Insights. Liquidity. Capital. [CLSA_RGB]<https://www.clsa.com/member> A CITIC Securities Company The content of this communication is intended for the recipient and is subject to CLSA Legal and Regulatory Notices. These can be viewed at https://www.clsa.com/disclaimer.html or sent to you upon request. Please consider before printing. CLSA is ISO14001 certified and committed to reducing its impact on the environment.

4 4

How to set customOID to use 1024 instead of 1000
by Simon Mousey Smith 27 Sep '18

27 Sep '18

Hi All Im trying to find out if its possible to change the conversion rate being used in the CustomOID ? When I SNMPGET a value from our storage system its returning a value and observium is then doing the conversion wrong… This is the reply I received from there support team after hours of me trying to work out why observium was showing 416.5GB and they was showing 387.9GB The command you are using shows result in bytes. At the same time "vstorage stat" command shows result in Gibibites not Gigabytes. Just for reference: 1 Gibibyte = 230 Byte = 1,073,741,824 Byte 1 Gigabyte = 109 Byte = 1,000,000,000 Byte #snmpget -v2c -cpublic 10.10.10.254 .1.3.6.1.4.1.8072.161.1.1.3.0 NET-SNMP-MIB::netSnmp.161.1.1.3.0 = Counter64: 416509057132 Here are output from your cluster: vstorage -c hestor stat | head -n 10 connected to MDS#11 Cluster 'hestor': healthy Space: [OK] allocatable 636.0GB (+2.28TB unlicensed) of 3.74TB, free 636.0GB of 1TB MDS nodes: 7 of 7, epoch uptime: 2d 22h, cluster version: 126 CS nodes: 7 of 7 (7 avail, 0 inactive, 0 offline), storage version: 126 License: [Error] License not loaded, capacity limited to 1024Gb Replication: 1 norm, 1 limit Chunks: [OK] 1767 (100%) healthy, 0 (0%) standby, 0 (0%) degraded, 0 (0%) urgent, 0 (0%) blocked, 0 (0%) pending, 0 (0%) offline, 0 (0%) replicating, 0 (0%) overcommitted, 0 (0%) deleting, 0 (0%) void FS: 387.9GB in 541 files, 541 inodes, 235 file maps, 1767 chunks, 3621 chunk replicas 416509057132/(1024*3) = 387.9 GB which is exactly the same as in "stats" Just for reference: 1 Gibibyte = 230 Byte = 1,073,741,824 Byte 1 Gigabyte = 109 Byte = 1,000,000,000 Byte Regards Simon

4 6

Issues Updating SVN
by Bill Brigden 27 Sep '18

27 Sep '18

Hi, Does anyone else have issues updating? Svn up is giving a domain error - taking a look the hostname svn.observium.org doesn't appear to resolve. Using a basic tool to view the DNS: https://mxtoolbox.com/SuperTool.aspx?action=dns%3aobservium.org&run=toolpage it suggests a number of issues with the glue as well. Cheers,

1 0

Palo Alto Firewall.
by Zafar Pravaiz 27 Sep '18

27 Sep '18

Greetings, I just noticed, after upgrading my PA-5050 palo alto firewall to 8.0.x observium does not show firewall stats, I have another pair PA-5050 on version 7.1.x it only shows Global protect tunnel graph. is there is change ? or I am missing something? Thanks Zafar Pravaiz Senior Network Architect Information Technology Department Tel +971 6 515 2164 Fax +971 6 515 2112 American University of Sharjah PO Box 26666, Sharjah United Arab Emirates http://www.aus.edu <http://www.aus.edu/> zpravaiz(a)aus.edu <mailto:youremail@aus.edu>

2 1

Re: [Observium] Observium Graphs
by Kaustubh Parthasarthy, CLSA 26 Sep '18

26 Sep '18

Hi Team, Can you please assist Regards Kaustubh From: Kaustubh Parthasarthy, CLSA Sent: Tuesday, September 25, 2018 10:27 AM To: Observium Cc: Shivani Shinde, CLSA Subject: Observium Graphs Hi Team, We were looking to find some information on the graphs which observium generates. Could someone please let us know or point us to the right path in the observium database from where we can get info on how the graphs are displayed ? What metrics are used ? etc What is the path where this info is stored ? Regards Kaustubh Parthasarthy Analyst, Production Management Group D +91 20 6646 8625 | M +91 989 284 4625 | T +91 20 6646 8888 4/F, C-Wing, Panchshil Tech Park-1, Yerawada, Pune 411006, India [:1. Social Media Icons:CLSA_Social Media Icons_linkedin.png]<https://hk.linkedin.com/company/clsa>[:1. Social Media Icons:CLSA_Social Media Icons_twitter.png]<https://twitter.com/clsainsights?lang=en>[:1. Social Media Icons:CLSA_Social Media Icons_youtube.png]<https://www.youtube.com/channel/UC0qWp_lLnOcRYmBlCNQgZKA>[:1. Social Media Icons:CLSA_Social Media Icons_facebook.png]<https://www.facebook.com/clsacommunity/> clsa.com<https://www.clsa.com/> Insights. Liquidity. Capital. [CLSA_RGB]<https://www.clsa.com/member> A CITIC Securities Company The content of this communication is intended for the recipient and is subject to CLSA Legal and Regulatory Notices. These can be viewed at https://www.clsa.com/disclaimer.html or sent to you upon request. Please consider before printing. CLSA is ISO14001 certified and committed to reducing its impact on the environment.

1 0

Problem with Syslog in Observium
by Paulo Zanette Duzzioni 25 Sep '18

25 Sep '18

HI, I am having problem with Syslog in Observium. Like This: https://jira.observium.org/browse/OBS-2690 Solution shown was install version r9262 ( "Syslog messages parsing improved in r9262.") ("Version r9262 works perfect."). My Observium is Observium CE 18.9.9420 (5th September 2018) How can I solve this problem with syslog? Can someone help me? -- Atenciosamente, Paulo -- Esta mensagem é de uso exclusivo dos citados e contém informação confidencial da Betha Sistemas, sendo seu sigilo protegido por lei e passível de monitoramento. É desautorizada a utilização para outros fins. Caso não seja o destinatário, estão proibidas a leitura, divulgação ou cópia. Neste caso, favor notificar o remetente e apagar esta mensagem.

2 1

Observium Graphs
by Kaustubh Parthasarthy, CLSA 25 Sep '18

25 Sep '18

Hi Team, We were looking to find some information on the graphs which observium generates. Could someone please let us know or point us to the right path in the observium database from where we can get info on how the graphs are displayed ? What metrics are used ? etc What is the path where this info is stored ? Regards Kaustubh Parthasarthy Analyst, Production Management Group D +91 20 6646 8625 | M +91 989 284 4625 | T +91 20 6646 8888 4/F, C-Wing, Panchshil Tech Park-1, Yerawada, Pune 411006, India [:1. Social Media Icons:CLSA_Social Media Icons_linkedin.png]<https://hk.linkedin.com/company/clsa>[:1. Social Media Icons:CLSA_Social Media Icons_twitter.png]<https://twitter.com/clsainsights?lang=en>[:1. Social Media Icons:CLSA_Social Media Icons_youtube.png]<https://www.youtube.com/channel/UC0qWp_lLnOcRYmBlCNQgZKA>[:1. Social Media Icons:CLSA_Social Media Icons_facebook.png]<https://www.facebook.com/clsacommunity/> clsa.com<https://www.clsa.com/> Insights. Liquidity. Capital. [CLSA_RGB]<https://www.clsa.com/member> A CITIC Securities Company The content of this communication is intended for the recipient and is subject to CLSA Legal and Regulatory Notices. These can be viewed at https://www.clsa.com/disclaimer.html or sent to you upon request. Please consider before printing. CLSA is ISO14001 certified and committed to reducing its impact on the environment.

1 0

Fwd: Problem with Syslog in Observium
by Paulo Zanette Duzzioni 24 Sep '18

24 Sep '18

Hi, I was able to solve the problem by setting the file's permission. "Enable store RAW syslog lines into logs/debug.log file. Make sure that logs dir and debug.log file have write permission for your syslog server user. For example in Ubuntu rsyslog uses user syslog, add write permission for it: sudo chmod o+w ".$config['log_dir']."/debug.log"; Thanks. Regards, Paulo ---------- Forwarded message --------- From: Paulo Zanette Duzzioni <paulo.duzzioni(a)betha.com.br> Date: sex, 21 de set de 2018 às 09:41 Subject: Problem with Syslog in Observium To: <observium(a)observium.org> I am having problem with Syslog in Observium. Like This: https://jira.observium.org/browse/OBS-2690 Solution shown was install version r9262 ( "Syslog messages parsing improved in r9262.") ("Version r9262 works perfect."). My Observium is Observium CE 18.9.9420 (5th September 2018) How can I solve this problem with syslog? Can someone help me? -- Atenciosamente, Paulo Zanette Duzzioni Analista de Infraestrutura Tecnologia da Informação - TI (48) 3431 0733 - Ramal 4510 Service Desk TI - Ramal 4000 -- Atenciosamente, Paulo Zanette Duzzioni Analista de Infraestrutura Tecnologia da Informação - TI (48) 3431 0733 - Ramal 4510 Service Desk TI - Ramal 4000 -- Esta mensagem é de uso exclusivo dos citados e contém informação confidencial da Betha Sistemas, sendo seu sigilo protegido por lei e passível de monitoramento. É desautorizada a utilização para outros fins. Caso não seja o destinatário, estão proibidas a leitura, divulgação ou cópia. Neste caso, favor notificar o remetente e apagar esta mensagem.

1 0

Custom math function on data of a custom OID
by Peter De Wit 24 Sep '18

24 Sep '18

Hi Guys, We are getting data from the custom OID's and I would like to run a math function on this data before putting it into the DB (some of them are Voltages that need to be divide by 100 to be useful) Here is the patch for what I current do - which is very hacky and not nice: Index: includes/polling/oids.inc.php =================================================================== --- includes/polling/oids.inc.php (revision 9443) +++ includes/polling/oids.inc.php (working copy) @@ -25,6 +25,7 @@ if (is_numeric($value)) { + $value=$value/100; $update_oid = array(); // Init! $update_oid['raw_value'] = $value; $update_oid['timestamp'] = time(); I would like to know, how can I modify the Custom OID "page" to allow 2 fields into the DB: * A drop down that will allow the user to select the math operator or N/A * A value to apply with the math operator I imaging that something like "/" will be loaded into the first field and 100 into the second. Any other suggestions/comments ? Thanks, Pieter

2 2

Re: [Observium] Observium unable to plot graph for device discovered.
by Kaustubh Parthasarthy, CLSA 24 Sep '18

24 Sep '18

The device is discovered but still the graphs are not getting generated: Its been more than 20 mins since the discovery is complete [cid:image002.png@01D45401.BF97BCC0] Can someone assist ? Regards Kaustubh From: observium [mailto:observium-bounces@observium.org] On Behalf Of Kaustubh Parthasarthy, CLSA Sent: Monday, September 24, 2018 12:16 PM To: Observium Subject: Re: [Observium] Observium unable to discover the device Got the issue. The SNMP community was public in the observium settings. Changed it to as per the device and then was able to discover the device. Regards Kaustubh From: observium [mailto:observium-bounces@observium.org] On Behalf Of Kaustubh Parthasarthy, CLSA Sent: Monday, September 24, 2018 12:03 PM To: Observium Subject: Re: [Observium] Observium unable to discover the device Hi Markus, I am able to ping the device from Observium: [cid:image003.png@01D45401.BF97BCC0] Regards Kaustubh From: observium [mailto:observium-bounces@observium.org] On Behalf Of Markus Klock Sent: Monday, September 24, 2018 11:51 AM To: Observium Network Observation System Subject: Re: [Observium] Observium unable to discover the device Are you sure the Observium-server is able to ping the device? This error message means that Observium was not able to get an ICMP-response from the device. Try adding the device from Observium CLI with debug output. /Markus Den mån 24 sep. 2018 kl 08:11 skrev Kaustubh Parthasarthy, CLSA <kaustubh.parthasarthy(a)clsa.com<mailto:kaustubh.parthasarthy@clsa.com>>: Hi Team, I am trying to add a device ZNEQLP206. I have added Observium’s IP and community string on the server’s SNMP file. I can ping the observium server from the device I want to discover and also on the reverse way. But when I try to discover the device I get the following error: [cid:image001.png@01D453FB.79EA9360] The device is not discovering. What can be the issue ? Kaustubh Parthasarthy Analyst, Production Management Group D +91 20 6646 8625 | M +91 989 284 4625 | T +91 20 6646 8888 4/F, C-Wing, Panchshil Tech Park-1, Yerawada, Pune 411006, India [:1. Social Media Icons:CLSA_Social Media Icons_linkedin.png]<https://hk.linkedin.com/company/clsa>[:1. Social Media Icons:CLSA_Social Media Icons_twitter.png]<https://twitter.com/clsainsights?lang=en>[:1. Social Media Icons:CLSA_Social Media Icons_youtube.png]<https://www.youtube.com/channel/UC0qWp_lLnOcRYmBlCNQgZKA>[:1. Social Media Icons:CLSA_Social Media Icons_facebook.png]<https://www.facebook.com/clsacommunity/> clsa.com<https://www.clsa.com/> Insights. Liquidity. Capital. [CLSA_RGB]<https://www.clsa.com/member> A CITIC Securities Company The content of this communication is intended for the recipient and is subject to CLSA Legal and Regulatory Notices. These can be viewed at https://www.clsa.com/disclaimer.html or sent to you upon request. Please consider before printing. CLSA is ISO14001 certified and committed to reducing its impact on the environment. _______________________________________________ observium mailing list observium(a)observium.org<mailto:observium@observium.org> http://postman.memetic.org/cgi-bin/mailman/listinfo/observium The content of this communication is intended for the recipient and is subject to CLSA Legal and Regulatory Notices. These can be viewed at https://www.clsa.com/disclaimer.html or sent to you upon request. Please consider before printing. CLSA is ISO14001 certified and committed to reducing its impact on the environment. The content of this communication is intended for the recipient and is subject to CLSA Legal and Regulatory Notices. These can be viewed at https://www.clsa.com/disclaimer.html or sent to you upon request. Please consider before printing. CLSA is ISO14001 certified and committed to reducing its impact on the environment. The content of this communication is intended for the recipient and is subject to CLSA Legal and Regulatory Notices. These can be viewed at https://www.clsa.com/disclaimer.html or sent to you upon request. Please consider before printing. CLSA is ISO14001 certified and committed to reducing its impact on the environment.

1 0

Observium unable to discover the device
by Kaustubh Parthasarthy, CLSA 24 Sep '18

24 Sep '18

Hi Team, I am trying to add a device ZNEQLP206. I have added Observium's IP and community string on the server's SNMP file. I can ping the observium server from the device I want to discover and also on the reverse way. But when I try to discover the device I get the following error: [cid:image001.png@01D453FB.79EA9360] The device is not discovering. What can be the issue ? Kaustubh Parthasarthy Analyst, Production Management Group D +91 20 6646 8625 | M +91 989 284 4625 | T +91 20 6646 8888 4/F, C-Wing, Panchshil Tech Park-1, Yerawada, Pune 411006, India [:1. Social Media Icons:CLSA_Social Media Icons_linkedin.png]<https://hk.linkedin.com/company/clsa>[:1. Social Media Icons:CLSA_Social Media Icons_twitter.png]<https://twitter.com/clsainsights?lang=en>[:1. Social Media Icons:CLSA_Social Media Icons_youtube.png]<https://www.youtube.com/channel/UC0qWp_lLnOcRYmBlCNQgZKA>[:1. Social Media Icons:CLSA_Social Media Icons_facebook.png]<https://www.facebook.com/clsacommunity/> clsa.com<https://www.clsa.com/> Insights. Liquidity. Capital. [CLSA_RGB]<https://www.clsa.com/member> A CITIC Securities Company The content of this communication is intended for the recipient and is subject to CLSA Legal and Regulatory Notices. These can be viewed at https://www.clsa.com/disclaimer.html or sent to you upon request. Please consider before printing. CLSA is ISO14001 certified and committed to reducing its impact on the environment.

2 3

Tracking Interface Flaps in JunOS via ifJnxCarrierTrans (Carrier Transitions)
by Bri Kaszycki 22 Sep '18

22 Sep '18

Hello Observium! We use the subscription edition of Observium, and are wondering if there is a way to track interface flaps over time and alert on them if they breach a certain threshold - similar to what is done with interface errors. JunOS does expose this data through ifJnxCarrierTrans, so tracking it would be feasible however I don't see any entity that currently captures this counter. Can anyone point us in the right direction for how to accomplish this, or is this something we could add as a feature request? Thanks for all the hard work guys, -bri

3 3

Clickatell SMS alerts
by Christian Schmit 21 Sep '18

21 Sep '18

Hi, We are running observium professional edition v.18.9.9428. We want to activate SMS alerting using the Clickatell transport however I cannot find where to enter the Clickatell login and password credentials in observium. I can only enter the recipient phone number and the clickatell API key but no login and password for clicktell. thanks, Chris

3 4

Re: [Observium] snmpbulkwalk vs snmpwalk
by Mike Stupalov 21 Sep '18

21 Sep '18

dlink... who still use this shit. Trouble in (not responded/empty ifDescr): /usr/bin/snmpbulkwalk -t '5' -v2c -c 'public' -Pu -OQUs -m IF-MIB -M /opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp 'udp':'dlink.rbs':'161' ifDescr Timeout: No Response from udp:dlink.rbs:161 ifName also empty.. no ways for naming ports. Not sure that this is snmpbulkwalk trouble, try to add in config.php: $config['os']['dlink']['snmp']['nobulk'] = TRUE; Simon Mousey Smith wrote on 19.09.18 17:30: > Attached if full debug log -dd > > > > > > Simon > >> On 18 Sep 2018, at 18:20, Mike Stupalov <mike(a)observium.org >> <mailto:mike@observium.org>> wrote: >> >> pls attach full poller debug (with separate_walk enabled). >> >> Simon Mousey Smith wrote on 18/09/2018 14:04: >>> including: includes/polling/ports.inc.php >>> ##### Module Start: ports ##### >>> >>> SQL[SELECT * FROM `ports` WHERE `device_id` = '50'] >>> SQL RUNTIME[0.00044799s] >>> >>> SQL[SELECT * FROM `entity_attribs` WHERE `device_id` = '50' AND >>> `entity_type` IN ('port')] >>> SQL RUNTIME[0.00025511s] >>> o Caching Oids Used separate data tables snmpwalk and per >>> port snmpget. >>> ifDescr >>> CMD[/usr/bin/snmpbulkwalk -t '5' -v2c -c *** -Pu -OQUs -m IF-MIB -M >>> /opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp >>> 'udp':'dlink.rbs':'161' ifDescr] >>> >>> When I switch the separate_walk on, it is still using the snmpbulkwalk >>> >>> I also found this too in the debug debug output >>> >>> ^[[1;44;96m > $attribs^[[0m^[[44;36m >>> /opt/observium/includes/polling/functions.inc.php:484 ^[[0m >>> array( >>> [enable_ports_separate_walk] => string(1) "1" >>> [ports_ignored_count] => string(2) "24" >>> ) >>> >>> Regards >>> >>> Simon >>> >>>> On 18 Sep 2018, at 11:45, Markus Klock <markus(a)best-practice.se >>>> <mailto:markus@best-practice.se>> wrote: >>>> >>>> You can try to go to the device in Observium, properties>modules >>>> and to the right click Enable on separate_walk module. >>>> This will make Observium poll the device with multiple snmpget's >>>> instead of bulkwalk, might be slower polling but should atleast work. >>>> >>>> /Markus >>>> >>>> Den tis 18 sep. 2018 kl 12:27 skrev Simon Mousey Smith >>>> <simonsmith5521(a)gmail.com <mailto:simonsmith5521@gmail.com>>: >>>> >>>> Hi, >>>> >>>> Yes the device is running the latest for its model (from 2016) >>>> however ive even tried there beta (from 2017) and still same >>>> results >>>> >>>> Nothing really must I can do then im guessing? >>>> >>>> Regards >>>> >>>> Simon >>>> >>>>> On 17 Sep 2018, at 18:07, Adam Armstrong <adama(a)memetic.org >>>>> <mailto:adama@memetic.org>> wrote: >>>>> >>>>> They use different SNMP commands. Poor SNMP stacks sometimes >>>>> shit themselves on bulkwalk, especially with high max-rep >>>>> (-Cr) values. >>>>> >>>>> bulkwalk uses GETBULK, which retrieves multiple values in one >>>>> go, reducing time taken to collect the table. >>>>> >>>>> root@zeta:/home/observium/dev# time snmpwalk -v2c -c public >>>>> c1800-a ifTable >> /dev/null >>>>> real 0m16.896s >>>>> user 0m0.016s >>>>> sys 0m0.004s >>>>> >>>>> root@zeta:/home/observium/dev# time snmpbulkwalk -v2c -c >>>>> public c1800-a ifTable >> /dev/null >>>>> real 0m1.708s >>>>> user 0m0.012s >>>>> sys 0m0.000s >>>>> >>>>> root@zeta:/home/observium/dev# time snmpbulkwalk -Cr100 -v2c >>>>> -c public c1800-a ifTable >> /dev/null >>>>> real 0m1.375s >>>>> user 0m0.008s >>>>> sys 0m0.000s >>>>> >>>>> Is this device running the latest firmware? Often these bugs >>>>> appear and disappear between versions. >>>>> >>>>> (incidentally, you can usually spot a shit SNMP stack when >>>>> they include the vendor and/or model name in ifDescr, hah!) >>>>> >>>>> adam. >>>>>> >>>>>> On 2018-09-17 12:29:05, Simon Mousey Smith >>>>>> <simonsmith5521(a)gmail.com <mailto:simonsmith5521@gmail.com>> >>>>>> wrote: >>>>>> >>>>>> Hi, >>>>>> >>>>>> What is the difference between ‘snmpbulkwalk’ and ‘snmpwalk’ ? >>>>>> >>>>>> I have an issue with a D-Link DGS-1100-24 and the ports of SNMP >>>>>> >>>>>> When I manually run the snmpbulkwalk that observium uses, it >>>>>> times out from getting the ifEntry details >>>>>> >>>>>> However if I run snmpwalk, it walks without any issues? >>>>>> >>>>>> Can I change observium to use snmpwalk for this device and >>>>>> the ports? >>>>>> >>>>>> root@observium:~# /usr/bin/snmpbulkwalk -t '5' -v2c -c public >>>>>> -Pu -OQUs -m IF-MIB -M >>>>>> /opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp >>>>>> 'udp':'dlink.rbs':'161' ifEntry >>>>>> ifIndex.1 = 1 >>>>>> ifIndex.2 = 2 >>>>>> ifIndex.3 = 3 >>>>>> ifIndex.4 = 4 >>>>>> ifIndex.5 = 5 >>>>>> ifIndex.6 = 6 >>>>>> ifIndex.7 = 7 >>>>>> ifIndex.8 = 8 >>>>>> ifIndex.9 = 9 >>>>>> ifIndex.10 = 10 >>>>>> ifIndex.11 = 11 >>>>>> ifIndex.12 = 12 >>>>>> ifIndex.13 = 13 >>>>>> ifIndex.14 = 14 >>>>>> ifIndex.15 = 15 >>>>>> ifIndex.16 = 16 >>>>>> ifIndex.17 = 17 >>>>>> ifIndex.18 = 18 >>>>>> ifIndex.19 = 19 >>>>>> ifIndex.20 = 20 >>>>>> ifIndex.21 = 21 >>>>>> ifIndex.22 = 22 >>>>>> ifIndex.23 = 23 >>>>>> ifIndex.24 = 24 >>>>>> ifDescr.1 = D-Link Corporation DGS-1100-24 1.01.018 Port 1 >>>>>> ifDescr.2 = D-Link Corporation DGS-1100-24 1.01.018 Port 2 >>>>>> ifDescr.3 = D-Link Corporation DGS-1100-24 1.01.018 Port 3 >>>>>> ifDescr.4 = D-Link Corporation DGS-1100-24 1.01.018 Port 4 >>>>>> ifDescr.5 = D-Link Corporation DGS-1100-24 1.01.018 Port 5 >>>>>> ifDescr.6 = D-Link Corporation DGS-1100-24 1.01.018 Port 6 >>>>>> Timeout: No Response from udp:dlink.rbs:161 >>>>>> >>>>>> root@observium:~# /usr/bin/snmpwalk -t '5' -v2c -c public -Pu >>>>>> -OQUs -m IF-MIB -M >>>>>> /opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp >>>>>> 'udp':'dlink.rbs':'161' ifEntry >>>>>> ifIndex.1 = 1 >>>>>> ifIndex.2 = 2 >>>>>> ifIndex.3 = 3 >>>>>> ifIndex.4 = 4 >>>>>> ifIndex.5 = 5 >>>>>> ifIndex.6 = 6 >>>>>> ifIndex.7 = 7 >>>>>> ifIndex.8 = 8 >>>>>> ifIndex.9 = 9 >>>>>> ifIndex.10 = 10 >>>>>> ifIndex.11 = 11 >>>>>> ifIndex.12 = 12 >>>>>> ifIndex.13 = 13 >>>>>> ifIndex.14 = 14 >>>>>> ifIndex.15 = 15 >>>>>> ifIndex.16 = 16 >>>>>> ifIndex.17 = 17 >>>>>> ifIndex.18 = 18 >>>>>> ifIndex.19 = 19 >>>>>> ifIndex.20 = 20 >>>>>> ifIndex.21 = 21 >>>>>> ifIndex.22 = 22 >>>>>> ifIndex.23 = 23 >>>>>> ifIndex.24 = 24 >>>>>> ifDescr.1 = D-Link Corporation DGS-1100-24 1.01.018 Port 1 >>>>>> ifDescr.2 = D-Link Corporation DGS-1100-24 1.01.018 Port 2 >>>>>> ifDescr.3 = D-Link Corporation DGS-1100-24 1.01.018 Port 3 >>>>>> ifDescr.4 = D-Link Corporation DGS-1100-24 1.01.018 Port 4 >>>>>> ifDescr.5 = D-Link Corporation DGS-1100-24 1.01.018 Port 5 >>>>>> ifDescr.6 = D-Link Corporation DGS-1100-24 1.01.018 Port 6 >>>>>> ifDescr.7 = D-Link Corporation DGS-1100-24 1.01.018 Port 7 >>>>>> ifDescr.8 = D-Link Corporation DGS-1100-24 1.01.018 Port 8 >>>>>> ifDescr.9 = D-Link Corporation DGS-1100-24 1.01.018 Port 9 >>>>>> ifDescr.10 = D-Link Corporation DGS-1100-24 1.01.018 Port 10 >>>>>> ifDescr.11 = D-Link Corporation DGS-1100-24 1.01.018 Port 11 >>>>>> ifDescr.12 = D-Link Corporation DGS-1100-24 1.01.018 Port 12 >>>>>> ifDescr.13 = D-Link Corporation DGS-1100-24 1.01.018 Port 13 >>>>>> ifDescr.14 = D-Link Corporation DGS-1100-24 1.01.018 Port 14 >>>>>> ifDescr.15 = D-Link Corporation DGS-1100-24 1.01.018 Port 15 >>>>>> ifDescr.16 = D-Link Corporation DGS-1100-24 1.01.018 Port 16 >>>>>> ifDescr.17 = D-Link Corporation DGS-1100-24 1.01.018 Port 17 >>>>>> ifDescr.18 = D-Link Corporation DGS-1100-24 1.01.018 Port 18 >>>>>> ifDescr.19 = D-Link Corporation DGS-1100-24 1.01.018 Port 19 >>>>>> ifDescr.20 = D-Link Corporation DGS-1100-24 1.01.018 Port 20 >>>>>> ifDescr.21 = D-Link Corporation DGS-1100-24 1.01.018 Port 21 >>>>>> ifDescr.22 = D-Link Corporation DGS-1100-24 1.01.018 Port 22 >>>>>> ifDescr.23 = D-Link Corporation DGS-1100-24 1.01.018 Port 23 >>>>>> ifDescr.24 = D-Link Corporation DGS-1100-24 1.01.018 Port 24 >>>>>> ifType.1 = ethernetCsmacd >>>>>> ifType.2 = ethernetCsmacd >>>>>> ifType.3 = ethernetCsmacd >>>>>> ifType.4 = ethernetCsmacd >>>>>> ifType.5 = ethernetCsmacd >>>>>> ifType.6 = ethernetCsmacd >>>>>> ifType.7 = ethernetCsmacd >>>>>> ifType.8 = ethernetCsmacd >>>>>> ifType.9 = ethernetCsmacd >>>>>> ifType.10 = ethernetCsmacd >>>>>> ifType.11 = ethernetCsmacd >>>>>> ifType.12 = ethernetCsmacd >>>>>> ifType.13 = ethernetCsmacd >>>>>> ifType.14 = ethernetCsmacd >>>>>> ifType.15 = ethernetCsmacd >>>>>> ifType.16 = ethernetCsmacd >>>>>> ifType.17 = ethernetCsmacd >>>>>> ifType.18 = ethernetCsmacd >>>>>> ifType.19 = ethernetCsmacd >>>>>> ifType.20 = ethernetCsmacd >>>>>> ifType.21 = ethernetCsmacd >>>>>> ifType.22 = ethernetCsmacd >>>>>> ifType.23 = ethernetCsmacd >>>>>> ifType.24 = ethernetCsmacd >>>>>> ifMtu.1 = 1522 >>>>>> ifMtu.2 = 1522 >>>>>> ifMtu.3 = 1522 >>>>>> ifMtu.4 = 1522 >>>>>> ifMtu.5 = 1522 >>>>>> ifMtu.6 = 1522 >>>>>> ifMtu.7 = 1522 >>>>>> ifMtu.8 = 1522 >>>>>> ifMtu.9 = 1522 >>>>>> ifMtu.10 = 1522 >>>>>> ifMtu.11 = 1522 >>>>>> ifMtu.12 = 1522 >>>>>> ifMtu.13 = 1522 >>>>>> ifMtu.14 = 1522 >>>>>> ifMtu.15 = 1522 >>>>>> ifMtu.16 = 1522 >>>>>> ifMtu.17 = 1522 >>>>>> ifMtu.18 = 1522 >>>>>> ifMtu.19 = 1522 >>>>>> ifMtu.20 = 1522 >>>>>> ifMtu.21 = 1522 >>>>>> ifMtu.22 = 1522 >>>>>> ifMtu.23 = 1522 >>>>>> ifMtu.24 = 1522 >>>>>> ifSpeed.1 = 100000000 >>>>>> ifSpeed.2 = 0 >>>>>> ifSpeed.3 = 0 >>>>>> ifSpeed.4 = 0 >>>>>> ifSpeed.5 = 0 >>>>>> ifSpeed.6 = 0 >>>>>> ifSpeed.7 = 0 >>>>>> ifSpeed.8 = 0 >>>>>> ifSpeed.9 = 0 >>>>>> ifSpeed.10 = 0 >>>>>> ifSpeed.11 = 0 >>>>>> ifSpeed.12 = 0 >>>>>> ifSpeed.13 = 0 >>>>>> ifSpeed.14 = 0 >>>>>> ifSpeed.15 = 0 >>>>>> ifSpeed.16 = 0 >>>>>> ifSpeed.17 = 0 >>>>>> ifSpeed.18 = 0 >>>>>> ifSpeed.19 = 0 >>>>>> ifSpeed.20 = 0 >>>>>> ifSpeed.21 = 0 >>>>>> ifSpeed.22 = 0 >>>>>> ifSpeed.23 = 0 >>>>>> ifSpeed.24 = 0 >>>>>> ifPhysAddress.1 = ec:22:80:40:3c:6 >>>>>> ifPhysAddress.2 = ec:22:80:40:3c:6 >>>>>> ifPhysAddress.3 = ec:22:80:40:3c:6 >>>>>> ifPhysAddress.4 = ec:22:80:40:3c:6 >>>>>> ifPhysAddress.5 = ec:22:80:40:3c:6 >>>>>> ifPhysAddress.6 = ec:22:80:40:3c:6 >>>>>> ifPhysAddress.7 = ec:22:80:40:3c:6 >>>>>> ifPhysAddress.8 = ec:22:80:40:3c:6 >>>>>> ifPhysAddress.9 = ec:22:80:40:3c:6 >>>>>> ifPhysAddress.10 = ec:22:80:40:3c:6 >>>>>> ifPhysAddress.11 = ec:22:80:40:3c:6 >>>>>> ifPhysAddress.12 = ec:22:80:40:3c:6 >>>>>> ifPhysAddress.13 = ec:22:80:40:3c:6 >>>>>> ifPhysAddress.14 = ec:22:80:40:3c:6 >>>>>> ifPhysAddress.15 = ec:22:80:40:3c:6 >>>>>> ifPhysAddress.16 = ec:22:80:40:3c:6 >>>>>> ifPhysAddress.17 = ec:22:80:40:3c:6 >>>>>> ifPhysAddress.18 = ec:22:80:40:3c:6 >>>>>> ifPhysAddress.19 = ec:22:80:40:3c:6 >>>>>> ifPhysAddress.20 = ec:22:80:40:3c:6 >>>>>> ifPhysAddress.21 = ec:22:80:40:3c:6 >>>>>> ifPhysAddress.22 = ec:22:80:40:3c:6 >>>>>> ifPhysAddress.23 = ec:22:80:40:3c:6 >>>>>> ifPhysAddress.24 = ec:22:80:40:3c:6 >>>>>> ifAdminStatus.1 = up >>>>>> ifAdminStatus.2 = up >>>>>> ifAdminStatus.3 = up >>>>>> ifAdminStatus.4 = up >>>>>> ifAdminStatus.5 = up >>>>>> ifAdminStatus.6 = up >>>>>> ifAdminStatus.7 = up >>>>>> ifAdminStatus.8 = up >>>>>> ifAdminStatus.9 = up >>>>>> ifAdminStatus.10 = up >>>>>> ifAdminStatus.11 = up >>>>>> ifAdminStatus.12 = up >>>>>> ifAdminStatus.13 = up >>>>>> ifAdminStatus.14 = up >>>>>> ifAdminStatus.15 = up >>>>>> ifAdminStatus.16 = up >>>>>> ifAdminStatus.17 = up >>>>>> ifAdminStatus.18 = up >>>>>> ifAdminStatus.19 = up >>>>>> ifAdminStatus.20 = up >>>>>> ifAdminStatus.21 = up >>>>>> ifAdminStatus.22 = up >>>>>> ifAdminStatus.23 = up >>>>>> ifAdminStatus.24 = up >>>>>> ifOperStatus.1 = up >>>>>> ifOperStatus.2 = down >>>>>> ifOperStatus.3 = down >>>>>> ifOperStatus.4 = down >>>>>> ifOperStatus.5 = down >>>>>> ifOperStatus.6 = down >>>>>> ifOperStatus.7 = down >>>>>> ifOperStatus.8 = down >>>>>> ifOperStatus.9 = down >>>>>> ifOperStatus.10 = down >>>>>> ifOperStatus.11 = down >>>>>> ifOperStatus.12 = down >>>>>> ifOperStatus.13 = down >>>>>> ifOperStatus.14 = down >>>>>> ifOperStatus.15 = down >>>>>> ifOperStatus.16 = down >>>>>> ifOperStatus.17 = down >>>>>> ifOperStatus.18 = down >>>>>> ifOperStatus.19 = down >>>>>> ifOperStatus.20 = down >>>>>> ifOperStatus.21 = down >>>>>> ifOperStatus.22 = down >>>>>> ifOperStatus.23 = down >>>>>> ifOperStatus.24 = down >>>>>> ifLastChange.1 = 0:0:00:00.00 >>>>>> ifLastChange.2 = 0:0:00:00.00 >>>>>> ifLastChange.3 = 0:0:00:00.00 >>>>>> ifLastChange.4 = 0:0:00:00.00 >>>>>> ifLastChange.5 = 0:0:00:00.00 >>>>>> ifLastChange.6 = 0:0:00:00.00 >>>>>> ifLastChange.7 = 0:0:00:00.00 >>>>>> ifLastChange.8 = 0:0:00:00.00 >>>>>> ifLastChange.9 = 0:0:00:00.00 >>>>>> ifLastChange.10 = 0:0:00:00.00 >>>>>> ifLastChange.11 = 0:0:00:00.00 >>>>>> ifLastChange.12 = 0:0:00:00.00 >>>>>> ifLastChange.13 = 0:0:00:00.00 >>>>>> ifLastChange.14 = 0:0:00:00.00 >>>>>> ifLastChange.15 = 0:0:00:00.00 >>>>>> ifLastChange.16 = 0:0:00:00.00 >>>>>> ifLastChange.17 = 0:0:00:00.00 >>>>>> ifLastChange.18 = 0:0:00:00.00 >>>>>> ifLastChange.19 = 0:0:00:00.00 >>>>>> ifLastChange.20 = 0:0:00:00.00 >>>>>> ifLastChange.21 = 0:0:00:00.00 >>>>>> ifLastChange.22 = 0:0:00:00.00 >>>>>> ifLastChange.23 = 0:0:00:00.00 >>>>>> ifLastChange.24 = 0:0:00:00.00 >>>>>> ifInOctets.1 = 2260563 >>>>>> ifInOctets.2 = 0 >>>>>> ifInOctets.3 = 0 >>>>>> ifInOctets.4 = 0 >>>>>> ifInOctets.5 = 0 >>>>>> ifInOctets.6 = 0 >>>>>> ifInOctets.7 = 0 >>>>>> ifInOctets.8 = 75140 >>>>>> ifInOctets.9 = 0 >>>>>> ifInOctets.10 = 0 >>>>>> ifInOctets.11 = 0 >>>>>> ifInOctets.12 = 0 >>>>>> ifInOctets.13 = 0 >>>>>> ifInOctets.14 = 0 >>>>>> ifInOctets.15 = 0 >>>>>> ifInOctets.16 = 0 >>>>>> ifInOctets.17 = 179128 >>>>>> ifInOctets.18 = 0 >>>>>> ifInOctets.19 = 0 >>>>>> ifInOctets.20 = 0 >>>>>> ifInOctets.21 = 0 >>>>>> ifInOctets.22 = 0 >>>>>> ifInOctets.23 = 0 >>>>>> ifInOctets.24 = 0 >>>>>> ifInUcastPkts.1 = 10964 >>>>>> ifInUcastPkts.2 = 0 >>>>>> ifInUcastPkts.3 = 0 >>>>>> ifInUcastPkts.4 = 0 >>>>>> ifInUcastPkts.5 = 0 >>>>>> ifInUcastPkts.6 = 0 >>>>>> ifInUcastPkts.7 = 0 >>>>>> ifInUcastPkts.8 = 167 >>>>>> ifInUcastPkts.9 = 0 >>>>>> ifInUcastPkts.10 = 0 >>>>>> ifInUcastPkts.11 = 0 >>>>>> ifInUcastPkts.12 = 0 >>>>>> ifInUcastPkts.13 = 0 >>>>>> ifInUcastPkts.14 = 0 >>>>>> ifInUcastPkts.15 = 0 >>>>>> ifInUcastPkts.16 = 0 >>>>>> ifInUcastPkts.17 = 353 >>>>>> ifInUcastPkts.18 = 0 >>>>>> ifInUcastPkts.19 = 0 >>>>>> ifInUcastPkts.20 = 0 >>>>>> ifInUcastPkts.21 = 0 >>>>>> ifInUcastPkts.22 = 0 >>>>>> ifInUcastPkts.23 = 0 >>>>>> ifInUcastPkts.24 = 0 >>>>>> ifInNUcastPkts.1 = 9051 >>>>>> ifInNUcastPkts.2 = 0 >>>>>> ifInNUcastPkts.3 = 0 >>>>>> ifInNUcastPkts.4 = 0 >>>>>> ifInNUcastPkts.5 = 0 >>>>>> ifInNUcastPkts.6 = 0 >>>>>> ifInNUcastPkts.7 = 0 >>>>>> ifInNUcastPkts.8 = 587 >>>>>> ifInNUcastPkts.9 = 0 >>>>>> ifInNUcastPkts.10 = 0 >>>>>> ifInNUcastPkts.11 = 0 >>>>>> ifInNUcastPkts.12 = 0 >>>>>> ifInNUcastPkts.13 = 0 >>>>>> ifInNUcastPkts.14 = 0 >>>>>> ifInNUcastPkts.15 = 0 >>>>>> ifInNUcastPkts.16 = 0 >>>>>> ifInNUcastPkts.17 = 182 >>>>>> ifInNUcastPkts.18 = 0 >>>>>> ifInNUcastPkts.19 = 0 >>>>>> ifInNUcastPkts.20 = 0 >>>>>> ifInNUcastPkts.21 = 0 >>>>>> ifInNUcastPkts.22 = 0 >>>>>> ifInNUcastPkts.23 = 0 >>>>>> ifInNUcastPkts.24 = 0 >>>>>> ifInDiscards.1 = 0 >>>>>> ifInDiscards.2 = 0 >>>>>> ifInDiscards.3 = 0 >>>>>> ifInDiscards.4 = 0 >>>>>> ifInDiscards.5 = 0 >>>>>> ifInDiscards.6 = 0 >>>>>> ifInDiscards.7 = 0 >>>>>> ifInDiscards.8 = 0 >>>>>> ifInDiscards.9 = 0 >>>>>> ifInDiscards.10 = 0 >>>>>> ifInDiscards.11 = 0 >>>>>> ifInDiscards.12 = 0 >>>>>> ifInDiscards.13 = 0 >>>>>> ifInDiscards.14 = 0 >>>>>> ifInDiscards.15 = 0 >>>>>> ifInDiscards.16 = 0 >>>>>> ifInDiscards.17 = 0 >>>>>> ifInDiscards.18 = 0 >>>>>> ifInDiscards.19 = 0 >>>>>> ifInDiscards.20 = 0 >>>>>> ifInDiscards.21 = 0 >>>>>> ifInDiscards.22 = 0 >>>>>> ifInDiscards.23 = 0 >>>>>> ifInDiscards.24 = 0 >>>>>> ifInErrors.1 = 0 >>>>>> ifInErrors.2 = 0 >>>>>> ifInErrors.3 = 0 >>>>>> ifInErrors.4 = 0 >>>>>> ifInErrors.5 = 0 >>>>>> ifInErrors.6 = 0 >>>>>> ifInErrors.7 = 0 >>>>>> ifInErrors.8 = 0 >>>>>> ifInErrors.9 = 0 >>>>>> ifInErrors.10 = 0 >>>>>> ifInErrors.11 = 0 >>>>>> ifInErrors.12 = 0 >>>>>> ifInErrors.13 = 0 >>>>>> ifInErrors.14 = 0 >>>>>> ifInErrors.15 = 0 >>>>>> ifInErrors.16 = 0 >>>>>> ifInErrors.17 = 0 >>>>>> ifInErrors.18 = 0 >>>>>> ifInErrors.19 = 0 >>>>>> ifInErrors.20 = 0 >>>>>> ifInErrors.21 = 0 >>>>>> ifInErrors.22 = 0 >>>>>> ifInErrors.23 = 0 >>>>>> ifInErrors.24 = 0 >>>>>> ifInUnknownProtos.1 = 0 >>>>>> ifInUnknownProtos.2 = 0 >>>>>> ifInUnknownProtos.3 = 0 >>>>>> ifInUnknownProtos.4 = 0 >>>>>> ifInUnknownProtos.5 = 0 >>>>>> ifInUnknownProtos.6 = 0 >>>>>> ifInUnknownProtos.7 = 0 >>>>>> ifInUnknownProtos.8 = 0 >>>>>> ifInUnknownProtos.9 = 0 >>>>>> ifInUnknownProtos.10 = 0 >>>>>> ifInUnknownProtos.11 = 0 >>>>>> ifInUnknownProtos.12 = 0 >>>>>> ifInUnknownProtos.13 = 0 >>>>>> ifInUnknownProtos.14 = 0 >>>>>> ifInUnknownProtos.15 = 0 >>>>>> ifInUnknownProtos.16 = 0 >>>>>> ifInUnknownProtos.17 = 0 >>>>>> ifInUnknownProtos.18 = 0 >>>>>> ifInUnknownProtos.19 = 0 >>>>>> ifInUnknownProtos.20 = 0 >>>>>> ifInUnknownProtos.21 = 0 >>>>>> ifInUnknownProtos.22 = 0 >>>>>> ifInUnknownProtos.23 = 0 >>>>>> ifInUnknownProtos.24 = 0 >>>>>> ifOutOctets.1 = 2033497 >>>>>> ifOutOctets.2 = 0 >>>>>> ifOutOctets.3 = 0 >>>>>> ifOutOctets.4 = 0 >>>>>> ifOutOctets.5 = 0 >>>>>> ifOutOctets.6 = 0 >>>>>> ifOutOctets.7 = 0 >>>>>> ifOutOctets.8 = 0 >>>>>> ifOutOctets.9 = 0 >>>>>> ifOutOctets.10 = 0 >>>>>> ifOutOctets.11 = 0 >>>>>> ifOutOctets.12 = 0 >>>>>> ifOutOctets.13 = 0 >>>>>> ifOutOctets.14 = 0 >>>>>> ifOutOctets.15 = 0 >>>>>> ifOutOctets.16 = 0 >>>>>> ifOutOctets.17 = 265264 >>>>>> ifOutOctets.18 = 0 >>>>>> ifOutOctets.19 = 0 >>>>>> ifOutOctets.20 = 0 >>>>>> ifOutOctets.21 = 0 >>>>>> ifOutOctets.22 = 0 >>>>>> ifOutOctets.23 = 0 >>>>>> ifOutOctets.24 = 0 >>>>>> ifOutUcastPkts.1 = 10212 >>>>>> ifOutUcastPkts.2 = 0 >>>>>> ifOutUcastPkts.3 = 0 >>>>>> ifOutUcastPkts.4 = 0 >>>>>> ifOutUcastPkts.5 = 0 >>>>>> ifOutUcastPkts.6 = 0 >>>>>> ifOutUcastPkts.7 = 0 >>>>>> ifOutUcastPkts.8 = 0 >>>>>> ifOutUcastPkts.9 = 0 >>>>>> ifOutUcastPkts.10 = 0 >>>>>> ifOutUcastPkts.11 = 0 >>>>>> ifOutUcastPkts.12 = 0 >>>>>> ifOutUcastPkts.13 = 0 >>>>>> ifOutUcastPkts.14 = 0 >>>>>> ifOutUcastPkts.15 = 0 >>>>>> ifOutUcastPkts.16 = 0 >>>>>> ifOutUcastPkts.17 = 308 >>>>>> ifOutUcastPkts.18 = 0 >>>>>> ifOutUcastPkts.19 = 0 >>>>>> ifOutUcastPkts.20 = 0 >>>>>> ifOutUcastPkts.21 = 0 >>>>>> ifOutUcastPkts.22 = 0 >>>>>> ifOutUcastPkts.23 = 0 >>>>>> ifOutUcastPkts.24 = 0 >>>>>> ifOutNUcastPkts.1 = 8 >>>>>> ifOutNUcastPkts.2 = 0 >>>>>> ifOutNUcastPkts.3 = 0 >>>>>> ifOutNUcastPkts.4 = 0 >>>>>> ifOutNUcastPkts.5 = 0 >>>>>> ifOutNUcastPkts.6 = 0 >>>>>> ifOutNUcastPkts.7 = 0 >>>>>> ifOutNUcastPkts.8 = 0 >>>>>> ifOutNUcastPkts.9 = 0 >>>>>> ifOutNUcastPkts.10 = 0 >>>>>> ifOutNUcastPkts.11 = 0 >>>>>> ifOutNUcastPkts.12 = 0 >>>>>> ifOutNUcastPkts.13 = 0 >>>>>> ifOutNUcastPkts.14 = 0 >>>>>> ifOutNUcastPkts.15 = 0 >>>>>> ifOutNUcastPkts.16 = 0 >>>>>> ifOutNUcastPkts.17 = 5 >>>>>> ifOutNUcastPkts.18 = 0 >>>>>> ifOutNUcastPkts.19 = 0 >>>>>> ifOutNUcastPkts.20 = 0 >>>>>> ifOutNUcastPkts.21 = 0 >>>>>> ifOutNUcastPkts.22 = 0 >>>>>> ifOutNUcastPkts.23 = 0 >>>>>> ifOutNUcastPkts.24 = 0 >>>>>> ifOutDiscards.1 = 0 >>>>>> ifOutDiscards.2 = 0 >>>>>> ifOutDiscards.3 = 0 >>>>>> ifOutDiscards.4 = 0 >>>>>> ifOutDiscards.5 = 0 >>>>>> ifOutDiscards.6 = 0 >>>>>> ifOutDiscards.7 = 0 >>>>>> ifOutDiscards.8 = 0 >>>>>> ifOutDiscards.9 = 0 >>>>>> ifOutDiscards.10 = 0 >>>>>> ifOutDiscards.11 = 0 >>>>>> ifOutDiscards.12 = 0 >>>>>> ifOutDiscards.13 = 0 >>>>>> ifOutDiscards.14 = 0 >>>>>> ifOutDiscards.15 = 0 >>>>>> ifOutDiscards.16 = 0 >>>>>> ifOutDiscards.17 = 0 >>>>>> ifOutDiscards.18 = 0 >>>>>> ifOutDiscards.19 = 0 >>>>>> ifOutDiscards.20 = 0 >>>>>> ifOutDiscards.21 = 0 >>>>>> ifOutDiscards.22 = 0 >>>>>> ifOutDiscards.23 = 0 >>>>>> ifOutDiscards.24 = 0 >>>>>> ifOutErrors.1 = 0 >>>>>> ifOutErrors.2 = 0 >>>>>> ifOutErrors.3 = 0 >>>>>> ifOutErrors.4 = 0 >>>>>> ifOutErrors.5 = 0 >>>>>> ifOutErrors.6 = 0 >>>>>> ifOutErrors.7 = 0 >>>>>> ifOutErrors.8 = 0 >>>>>> ifOutErrors.9 = 0 >>>>>> ifOutErrors.10 = 0 >>>>>> ifOutErrors.11 = 0 >>>>>> ifOutErrors.12 = 0 >>>>>> ifOutErrors.13 = 0 >>>>>> ifOutErrors.14 = 0 >>>>>> ifOutErrors.15 = 0 >>>>>> ifOutErrors.16 = 0 >>>>>> ifOutErrors.17 = 0 >>>>>> ifOutErrors.18 = 0 >>>>>> ifOutErrors.19 = 0 >>>>>> ifOutErrors.20 = 0 >>>>>> ifOutErrors.21 = 0 >>>>>> ifOutErrors.22 = 0 >>>>>> ifOutErrors.23 = 0 >>>>>> ifOutErrors.24 = 0 >>>>>> ifOutQLen.1 = 0 >>>>>> ifOutQLen.2 = 0 >>>>>> ifOutQLen.3 = 0 >>>>>> ifOutQLen.4 = 0 >>>>>> ifOutQLen.5 = 0 >>>>>> ifOutQLen.6 = 0 >>>>>> ifOutQLen.7 = 0 >>>>>> ifOutQLen.8 = 0 >>>>>> ifOutQLen.9 = 0 >>>>>> ifOutQLen.10 = 0 >>>>>> ifOutQLen.11 = 0 >>>>>> ifOutQLen.12 = 0 >>>>>> ifOutQLen.13 = 0 >>>>>> ifOutQLen.14 = 0 >>>>>> ifOutQLen.15 = 0 >>>>>> ifOutQLen.16 = 0 >>>>>> ifOutQLen.17 = 0 >>>>>> ifOutQLen.18 = 0 >>>>>> ifOutQLen.19 = 0 >>>>>> ifOutQLen.20 = 0 >>>>>> ifOutQLen.21 = 0 >>>>>> ifOutQLen.22 = 0 >>>>>> ifOutQLen.23 = 0 >>>>>> ifOutQLen.24 = 0 >>>>>> ifSpecific.1 = zeroDotZero >>>>>> ifSpecific.2 = zeroDotZero >>>>>> ifSpecific.3 = zeroDotZero >>>>>> ifSpecific.4 = zeroDotZero >>>>>> ifSpecific.5 = zeroDotZero >>>>>> ifSpecific.6 = zeroDotZero >>>>>> ifSpecific.7 = zeroDotZero >>>>>> ifSpecific.8 = zeroDotZero >>>>>> ifSpecific.9 = zeroDotZero >>>>>> ifSpecific.10 = zeroDotZero >>>>>> ifSpecific.11 = zeroDotZero >>>>>> ifSpecific.12 = zeroDotZero >>>>>> ifSpecific.13 = zeroDotZero >>>>>> ifSpecific.14 = zeroDotZero >>>>>> ifSpecific.15 = zeroDotZero >>>>>> ifSpecific.16 = zeroDotZero >>>>>> ifSpecific.17 = zeroDotZero >>>>>> ifSpecific.18 = zeroDotZero >>>>>> ifSpecific.19 = zeroDotZero >>>>>> ifSpecific.20 = zeroDotZero >>>>>> ifSpecific.21 = zeroDotZero >>>>>> ifSpecific.22 = zeroDotZero >>>>>> ifSpecific.23 = zeroDotZero >>>>>> ifSpecific.24 = zeroDotZero >>>>>> root@observium:~# >>>>>> >>>>>> Regards >>>>>> >>>>>> Simon >>>>>> _______________________________________________ >>>>>> observium mailing list >>>>>> observium(a)observium.org <mailto:observium@observium.org> >>>>>> http://postman.memetic.org/cgi-bin/mailman/listinfo/observium >>>>> _______________________________________________ >>>>> observium mailing list >>>>> observium(a)observium.org <mailto:observium@observium.org> >>>>> http://postman.memetic.org/cgi-bin/mailman/listinfo/observium >>>> >>>> _______________________________________________ >>>> observium mailing list >>>> observium(a)observium.org <mailto:observium@observium.org> >>>> http://postman.memetic.org/cgi-bin/mailman/listinfo/observium >>>> >>>> _______________________________________________ >>>> observium mailing list >>>> observium(a)observium.org <mailto:observium@observium.org> >>>> http://postman.memetic.org/cgi-bin/mailman/listinfo/observium >>> >>> >>> >>> _______________________________________________ >>> observium mailing list >>> observium(a)observium.org >>> http://postman.memetic.org/cgi-bin/mailman/listinfo/observium >> >> -- >> Mike Stupalov >> Observium Limited, http://observium.org >> > -- Mike Stupalov Observium Limited, http://observium.org

2 1

Disabling alerts during maintenance
by Erdem HAKI 20 Sep '18

20 Sep '18

Hello, What is the best/easy way disabling all alerts during the maintenance window if we don't want to get tons of alerts? Best

2 1

Adding device support...
by Ron Marosko 19 Sep '18

19 Sep '18

Howdy Mike/Adam, I opened a new ticket 2775 to add some additional device support (patches included), and discovered that an older ticket 2517 (patch included also) is still open too. Any possibility to get those merged into the rolling release? Regards, Ron -- Ron Marosko, Jr. . . . . . . . . . . . . . . . . . . . . . . . . . . CCIE No. 4526 (R/S), NN5DX Senior Network Engineer RJR Services, Inc. 1108 West Dickinson Blvd, Suite A Fort Stockton, TX 79735 USA o: +1 432 336 5600 x115 c: +1 432 290 6344 e: <mailto:ron@rjr-services.com> ron(a)rjr-services.com pgp pubkey: <http://pgp.mit.edu:11371/pks/lookup?op=get&search=0x778B3B0258AB8B5C> 0x58AB8B5C "To know me is to fly with me." -- This message has been scanned by E.F.A. Project and is believed to be clean.

1 0

check disk I/O on windows
by Andi Felani 18 Sep '18

18 Sep '18

hi all, how to check disk I/O on windows ? anybody can help me?

2 1

snmpbulkwalk vs snmpwalk
by Simon Mousey Smith 18 Sep '18

18 Sep '18

Hi, What is the difference between ‘snmpbulkwalk’ and ‘snmpwalk’ ? I have an issue with a D-Link DGS-1100-24 and the ports of SNMP When I manually run the snmpbulkwalk that observium uses, it times out from getting the ifEntry details However if I run snmpwalk, it walks without any issues? Can I change observium to use snmpwalk for this device and the ports? root@observium:~# /usr/bin/snmpbulkwalk -t '5' -v2c -c public -Pu -OQUs -m IF-MIB -M /opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp 'udp':'dlink.rbs':'161' ifEntry ifIndex.1 = 1 ifIndex.2 = 2 ifIndex.3 = 3 ifIndex.4 = 4 ifIndex.5 = 5 ifIndex.6 = 6 ifIndex.7 = 7 ifIndex.8 = 8 ifIndex.9 = 9 ifIndex.10 = 10 ifIndex.11 = 11 ifIndex.12 = 12 ifIndex.13 = 13 ifIndex.14 = 14 ifIndex.15 = 15 ifIndex.16 = 16 ifIndex.17 = 17 ifIndex.18 = 18 ifIndex.19 = 19 ifIndex.20 = 20 ifIndex.21 = 21 ifIndex.22 = 22 ifIndex.23 = 23 ifIndex.24 = 24 ifDescr.1 = D-Link Corporation DGS-1100-24 1.01.018 Port 1 ifDescr.2 = D-Link Corporation DGS-1100-24 1.01.018 Port 2 ifDescr.3 = D-Link Corporation DGS-1100-24 1.01.018 Port 3 ifDescr.4 = D-Link Corporation DGS-1100-24 1.01.018 Port 4 ifDescr.5 = D-Link Corporation DGS-1100-24 1.01.018 Port 5 ifDescr.6 = D-Link Corporation DGS-1100-24 1.01.018 Port 6 Timeout: No Response from udp:dlink.rbs:161 root@observium:~# /usr/bin/snmpwalk -t '5' -v2c -c public -Pu -OQUs -m IF-MIB -M /opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp 'udp':'dlink.rbs':'161' ifEntry ifIndex.1 = 1 ifIndex.2 = 2 ifIndex.3 = 3 ifIndex.4 = 4 ifIndex.5 = 5 ifIndex.6 = 6 ifIndex.7 = 7 ifIndex.8 = 8 ifIndex.9 = 9 ifIndex.10 = 10 ifIndex.11 = 11 ifIndex.12 = 12 ifIndex.13 = 13 ifIndex.14 = 14 ifIndex.15 = 15 ifIndex.16 = 16 ifIndex.17 = 17 ifIndex.18 = 18 ifIndex.19 = 19 ifIndex.20 = 20 ifIndex.21 = 21 ifIndex.22 = 22 ifIndex.23 = 23 ifIndex.24 = 24 ifDescr.1 = D-Link Corporation DGS-1100-24 1.01.018 Port 1 ifDescr.2 = D-Link Corporation DGS-1100-24 1.01.018 Port 2 ifDescr.3 = D-Link Corporation DGS-1100-24 1.01.018 Port 3 ifDescr.4 = D-Link Corporation DGS-1100-24 1.01.018 Port 4 ifDescr.5 = D-Link Corporation DGS-1100-24 1.01.018 Port 5 ifDescr.6 = D-Link Corporation DGS-1100-24 1.01.018 Port 6 ifDescr.7 = D-Link Corporation DGS-1100-24 1.01.018 Port 7 ifDescr.8 = D-Link Corporation DGS-1100-24 1.01.018 Port 8 ifDescr.9 = D-Link Corporation DGS-1100-24 1.01.018 Port 9 ifDescr.10 = D-Link Corporation DGS-1100-24 1.01.018 Port 10 ifDescr.11 = D-Link Corporation DGS-1100-24 1.01.018 Port 11 ifDescr.12 = D-Link Corporation DGS-1100-24 1.01.018 Port 12 ifDescr.13 = D-Link Corporation DGS-1100-24 1.01.018 Port 13 ifDescr.14 = D-Link Corporation DGS-1100-24 1.01.018 Port 14 ifDescr.15 = D-Link Corporation DGS-1100-24 1.01.018 Port 15 ifDescr.16 = D-Link Corporation DGS-1100-24 1.01.018 Port 16 ifDescr.17 = D-Link Corporation DGS-1100-24 1.01.018 Port 17 ifDescr.18 = D-Link Corporation DGS-1100-24 1.01.018 Port 18 ifDescr.19 = D-Link Corporation DGS-1100-24 1.01.018 Port 19 ifDescr.20 = D-Link Corporation DGS-1100-24 1.01.018 Port 20 ifDescr.21 = D-Link Corporation DGS-1100-24 1.01.018 Port 21 ifDescr.22 = D-Link Corporation DGS-1100-24 1.01.018 Port 22 ifDescr.23 = D-Link Corporation DGS-1100-24 1.01.018 Port 23 ifDescr.24 = D-Link Corporation DGS-1100-24 1.01.018 Port 24 ifType.1 = ethernetCsmacd ifType.2 = ethernetCsmacd ifType.3 = ethernetCsmacd ifType.4 = ethernetCsmacd ifType.5 = ethernetCsmacd ifType.6 = ethernetCsmacd ifType.7 = ethernetCsmacd ifType.8 = ethernetCsmacd ifType.9 = ethernetCsmacd ifType.10 = ethernetCsmacd ifType.11 = ethernetCsmacd ifType.12 = ethernetCsmacd ifType.13 = ethernetCsmacd ifType.14 = ethernetCsmacd ifType.15 = ethernetCsmacd ifType.16 = ethernetCsmacd ifType.17 = ethernetCsmacd ifType.18 = ethernetCsmacd ifType.19 = ethernetCsmacd ifType.20 = ethernetCsmacd ifType.21 = ethernetCsmacd ifType.22 = ethernetCsmacd ifType.23 = ethernetCsmacd ifType.24 = ethernetCsmacd ifMtu.1 = 1522 ifMtu.2 = 1522 ifMtu.3 = 1522 ifMtu.4 = 1522 ifMtu.5 = 1522 ifMtu.6 = 1522 ifMtu.7 = 1522 ifMtu.8 = 1522 ifMtu.9 = 1522 ifMtu.10 = 1522 ifMtu.11 = 1522 ifMtu.12 = 1522 ifMtu.13 = 1522 ifMtu.14 = 1522 ifMtu.15 = 1522 ifMtu.16 = 1522 ifMtu.17 = 1522 ifMtu.18 = 1522 ifMtu.19 = 1522 ifMtu.20 = 1522 ifMtu.21 = 1522 ifMtu.22 = 1522 ifMtu.23 = 1522 ifMtu.24 = 1522 ifSpeed.1 = 100000000 ifSpeed.2 = 0 ifSpeed.3 = 0 ifSpeed.4 = 0 ifSpeed.5 = 0 ifSpeed.6 = 0 ifSpeed.7 = 0 ifSpeed.8 = 0 ifSpeed.9 = 0 ifSpeed.10 = 0 ifSpeed.11 = 0 ifSpeed.12 = 0 ifSpeed.13 = 0 ifSpeed.14 = 0 ifSpeed.15 = 0 ifSpeed.16 = 0 ifSpeed.17 = 0 ifSpeed.18 = 0 ifSpeed.19 = 0 ifSpeed.20 = 0 ifSpeed.21 = 0 ifSpeed.22 = 0 ifSpeed.23 = 0 ifSpeed.24 = 0 ifPhysAddress.1 = ec:22:80:40:3c:6 ifPhysAddress.2 = ec:22:80:40:3c:6 ifPhysAddress.3 = ec:22:80:40:3c:6 ifPhysAddress.4 = ec:22:80:40:3c:6 ifPhysAddress.5 = ec:22:80:40:3c:6 ifPhysAddress.6 = ec:22:80:40:3c:6 ifPhysAddress.7 = ec:22:80:40:3c:6 ifPhysAddress.8 = ec:22:80:40:3c:6 ifPhysAddress.9 = ec:22:80:40:3c:6 ifPhysAddress.10 = ec:22:80:40:3c:6 ifPhysAddress.11 = ec:22:80:40:3c:6 ifPhysAddress.12 = ec:22:80:40:3c:6 ifPhysAddress.13 = ec:22:80:40:3c:6 ifPhysAddress.14 = ec:22:80:40:3c:6 ifPhysAddress.15 = ec:22:80:40:3c:6 ifPhysAddress.16 = ec:22:80:40:3c:6 ifPhysAddress.17 = ec:22:80:40:3c:6 ifPhysAddress.18 = ec:22:80:40:3c:6 ifPhysAddress.19 = ec:22:80:40:3c:6 ifPhysAddress.20 = ec:22:80:40:3c:6 ifPhysAddress.21 = ec:22:80:40:3c:6 ifPhysAddress.22 = ec:22:80:40:3c:6 ifPhysAddress.23 = ec:22:80:40:3c:6 ifPhysAddress.24 = ec:22:80:40:3c:6 ifAdminStatus.1 = up ifAdminStatus.2 = up ifAdminStatus.3 = up ifAdminStatus.4 = up ifAdminStatus.5 = up ifAdminStatus.6 = up ifAdminStatus.7 = up ifAdminStatus.8 = up ifAdminStatus.9 = up ifAdminStatus.10 = up ifAdminStatus.11 = up ifAdminStatus.12 = up ifAdminStatus.13 = up ifAdminStatus.14 = up ifAdminStatus.15 = up ifAdminStatus.16 = up ifAdminStatus.17 = up ifAdminStatus.18 = up ifAdminStatus.19 = up ifAdminStatus.20 = up ifAdminStatus.21 = up ifAdminStatus.22 = up ifAdminStatus.23 = up ifAdminStatus.24 = up ifOperStatus.1 = up ifOperStatus.2 = down ifOperStatus.3 = down ifOperStatus.4 = down ifOperStatus.5 = down ifOperStatus.6 = down ifOperStatus.7 = down ifOperStatus.8 = down ifOperStatus.9 = down ifOperStatus.10 = down ifOperStatus.11 = down ifOperStatus.12 = down ifOperStatus.13 = down ifOperStatus.14 = down ifOperStatus.15 = down ifOperStatus.16 = down ifOperStatus.17 = down ifOperStatus.18 = down ifOperStatus.19 = down ifOperStatus.20 = down ifOperStatus.21 = down ifOperStatus.22 = down ifOperStatus.23 = down ifOperStatus.24 = down ifLastChange.1 = 0:0:00:00.00 ifLastChange.2 = 0:0:00:00.00 ifLastChange.3 = 0:0:00:00.00 ifLastChange.4 = 0:0:00:00.00 ifLastChange.5 = 0:0:00:00.00 ifLastChange.6 = 0:0:00:00.00 ifLastChange.7 = 0:0:00:00.00 ifLastChange.8 = 0:0:00:00.00 ifLastChange.9 = 0:0:00:00.00 ifLastChange.10 = 0:0:00:00.00 ifLastChange.11 = 0:0:00:00.00 ifLastChange.12 = 0:0:00:00.00 ifLastChange.13 = 0:0:00:00.00 ifLastChange.14 = 0:0:00:00.00 ifLastChange.15 = 0:0:00:00.00 ifLastChange.16 = 0:0:00:00.00 ifLastChange.17 = 0:0:00:00.00 ifLastChange.18 = 0:0:00:00.00 ifLastChange.19 = 0:0:00:00.00 ifLastChange.20 = 0:0:00:00.00 ifLastChange.21 = 0:0:00:00.00 ifLastChange.22 = 0:0:00:00.00 ifLastChange.23 = 0:0:00:00.00 ifLastChange.24 = 0:0:00:00.00 ifInOctets.1 = 2260563 ifInOctets.2 = 0 ifInOctets.3 = 0 ifInOctets.4 = 0 ifInOctets.5 = 0 ifInOctets.6 = 0 ifInOctets.7 = 0 ifInOctets.8 = 75140 ifInOctets.9 = 0 ifInOctets.10 = 0 ifInOctets.11 = 0 ifInOctets.12 = 0 ifInOctets.13 = 0 ifInOctets.14 = 0 ifInOctets.15 = 0 ifInOctets.16 = 0 ifInOctets.17 = 179128 ifInOctets.18 = 0 ifInOctets.19 = 0 ifInOctets.20 = 0 ifInOctets.21 = 0 ifInOctets.22 = 0 ifInOctets.23 = 0 ifInOctets.24 = 0 ifInUcastPkts.1 = 10964 ifInUcastPkts.2 = 0 ifInUcastPkts.3 = 0 ifInUcastPkts.4 = 0 ifInUcastPkts.5 = 0 ifInUcastPkts.6 = 0 ifInUcastPkts.7 = 0 ifInUcastPkts.8 = 167 ifInUcastPkts.9 = 0 ifInUcastPkts.10 = 0 ifInUcastPkts.11 = 0 ifInUcastPkts.12 = 0 ifInUcastPkts.13 = 0 ifInUcastPkts.14 = 0 ifInUcastPkts.15 = 0 ifInUcastPkts.16 = 0 ifInUcastPkts.17 = 353 ifInUcastPkts.18 = 0 ifInUcastPkts.19 = 0 ifInUcastPkts.20 = 0 ifInUcastPkts.21 = 0 ifInUcastPkts.22 = 0 ifInUcastPkts.23 = 0 ifInUcastPkts.24 = 0 ifInNUcastPkts.1 = 9051 ifInNUcastPkts.2 = 0 ifInNUcastPkts.3 = 0 ifInNUcastPkts.4 = 0 ifInNUcastPkts.5 = 0 ifInNUcastPkts.6 = 0 ifInNUcastPkts.7 = 0 ifInNUcastPkts.8 = 587 ifInNUcastPkts.9 = 0 ifInNUcastPkts.10 = 0 ifInNUcastPkts.11 = 0 ifInNUcastPkts.12 = 0 ifInNUcastPkts.13 = 0 ifInNUcastPkts.14 = 0 ifInNUcastPkts.15 = 0 ifInNUcastPkts.16 = 0 ifInNUcastPkts.17 = 182 ifInNUcastPkts.18 = 0 ifInNUcastPkts.19 = 0 ifInNUcastPkts.20 = 0 ifInNUcastPkts.21 = 0 ifInNUcastPkts.22 = 0 ifInNUcastPkts.23 = 0 ifInNUcastPkts.24 = 0 ifInDiscards.1 = 0 ifInDiscards.2 = 0 ifInDiscards.3 = 0 ifInDiscards.4 = 0 ifInDiscards.5 = 0 ifInDiscards.6 = 0 ifInDiscards.7 = 0 ifInDiscards.8 = 0 ifInDiscards.9 = 0 ifInDiscards.10 = 0 ifInDiscards.11 = 0 ifInDiscards.12 = 0 ifInDiscards.13 = 0 ifInDiscards.14 = 0 ifInDiscards.15 = 0 ifInDiscards.16 = 0 ifInDiscards.17 = 0 ifInDiscards.18 = 0 ifInDiscards.19 = 0 ifInDiscards.20 = 0 ifInDiscards.21 = 0 ifInDiscards.22 = 0 ifInDiscards.23 = 0 ifInDiscards.24 = 0 ifInErrors.1 = 0 ifInErrors.2 = 0 ifInErrors.3 = 0 ifInErrors.4 = 0 ifInErrors.5 = 0 ifInErrors.6 = 0 ifInErrors.7 = 0 ifInErrors.8 = 0 ifInErrors.9 = 0 ifInErrors.10 = 0 ifInErrors.11 = 0 ifInErrors.12 = 0 ifInErrors.13 = 0 ifInErrors.14 = 0 ifInErrors.15 = 0 ifInErrors.16 = 0 ifInErrors.17 = 0 ifInErrors.18 = 0 ifInErrors.19 = 0 ifInErrors.20 = 0 ifInErrors.21 = 0 ifInErrors.22 = 0 ifInErrors.23 = 0 ifInErrors.24 = 0 ifInUnknownProtos.1 = 0 ifInUnknownProtos.2 = 0 ifInUnknownProtos.3 = 0 ifInUnknownProtos.4 = 0 ifInUnknownProtos.5 = 0 ifInUnknownProtos.6 = 0 ifInUnknownProtos.7 = 0 ifInUnknownProtos.8 = 0 ifInUnknownProtos.9 = 0 ifInUnknownProtos.10 = 0 ifInUnknownProtos.11 = 0 ifInUnknownProtos.12 = 0 ifInUnknownProtos.13 = 0 ifInUnknownProtos.14 = 0 ifInUnknownProtos.15 = 0 ifInUnknownProtos.16 = 0 ifInUnknownProtos.17 = 0 ifInUnknownProtos.18 = 0 ifInUnknownProtos.19 = 0 ifInUnknownProtos.20 = 0 ifInUnknownProtos.21 = 0 ifInUnknownProtos.22 = 0 ifInUnknownProtos.23 = 0 ifInUnknownProtos.24 = 0 ifOutOctets.1 = 2033497 ifOutOctets.2 = 0 ifOutOctets.3 = 0 ifOutOctets.4 = 0 ifOutOctets.5 = 0 ifOutOctets.6 = 0 ifOutOctets.7 = 0 ifOutOctets.8 = 0 ifOutOctets.9 = 0 ifOutOctets.10 = 0 ifOutOctets.11 = 0 ifOutOctets.12 = 0 ifOutOctets.13 = 0 ifOutOctets.14 = 0 ifOutOctets.15 = 0 ifOutOctets.16 = 0 ifOutOctets.17 = 265264 ifOutOctets.18 = 0 ifOutOctets.19 = 0 ifOutOctets.20 = 0 ifOutOctets.21 = 0 ifOutOctets.22 = 0 ifOutOctets.23 = 0 ifOutOctets.24 = 0 ifOutUcastPkts.1 = 10212 ifOutUcastPkts.2 = 0 ifOutUcastPkts.3 = 0 ifOutUcastPkts.4 = 0 ifOutUcastPkts.5 = 0 ifOutUcastPkts.6 = 0 ifOutUcastPkts.7 = 0 ifOutUcastPkts.8 = 0 ifOutUcastPkts.9 = 0 ifOutUcastPkts.10 = 0 ifOutUcastPkts.11 = 0 ifOutUcastPkts.12 = 0 ifOutUcastPkts.13 = 0 ifOutUcastPkts.14 = 0 ifOutUcastPkts.15 = 0 ifOutUcastPkts.16 = 0 ifOutUcastPkts.17 = 308 ifOutUcastPkts.18 = 0 ifOutUcastPkts.19 = 0 ifOutUcastPkts.20 = 0 ifOutUcastPkts.21 = 0 ifOutUcastPkts.22 = 0 ifOutUcastPkts.23 = 0 ifOutUcastPkts.24 = 0 ifOutNUcastPkts.1 = 8 ifOutNUcastPkts.2 = 0 ifOutNUcastPkts.3 = 0 ifOutNUcastPkts.4 = 0 ifOutNUcastPkts.5 = 0 ifOutNUcastPkts.6 = 0 ifOutNUcastPkts.7 = 0 ifOutNUcastPkts.8 = 0 ifOutNUcastPkts.9 = 0 ifOutNUcastPkts.10 = 0 ifOutNUcastPkts.11 = 0 ifOutNUcastPkts.12 = 0 ifOutNUcastPkts.13 = 0 ifOutNUcastPkts.14 = 0 ifOutNUcastPkts.15 = 0 ifOutNUcastPkts.16 = 0 ifOutNUcastPkts.17 = 5 ifOutNUcastPkts.18 = 0 ifOutNUcastPkts.19 = 0 ifOutNUcastPkts.20 = 0 ifOutNUcastPkts.21 = 0 ifOutNUcastPkts.22 = 0 ifOutNUcastPkts.23 = 0 ifOutNUcastPkts.24 = 0 ifOutDiscards.1 = 0 ifOutDiscards.2 = 0 ifOutDiscards.3 = 0 ifOutDiscards.4 = 0 ifOutDiscards.5 = 0 ifOutDiscards.6 = 0 ifOutDiscards.7 = 0 ifOutDiscards.8 = 0 ifOutDiscards.9 = 0 ifOutDiscards.10 = 0 ifOutDiscards.11 = 0 ifOutDiscards.12 = 0 ifOutDiscards.13 = 0 ifOutDiscards.14 = 0 ifOutDiscards.15 = 0 ifOutDiscards.16 = 0 ifOutDiscards.17 = 0 ifOutDiscards.18 = 0 ifOutDiscards.19 = 0 ifOutDiscards.20 = 0 ifOutDiscards.21 = 0 ifOutDiscards.22 = 0 ifOutDiscards.23 = 0 ifOutDiscards.24 = 0 ifOutErrors.1 = 0 ifOutErrors.2 = 0 ifOutErrors.3 = 0 ifOutErrors.4 = 0 ifOutErrors.5 = 0 ifOutErrors.6 = 0 ifOutErrors.7 = 0 ifOutErrors.8 = 0 ifOutErrors.9 = 0 ifOutErrors.10 = 0 ifOutErrors.11 = 0 ifOutErrors.12 = 0 ifOutErrors.13 = 0 ifOutErrors.14 = 0 ifOutErrors.15 = 0 ifOutErrors.16 = 0 ifOutErrors.17 = 0 ifOutErrors.18 = 0 ifOutErrors.19 = 0 ifOutErrors.20 = 0 ifOutErrors.21 = 0 ifOutErrors.22 = 0 ifOutErrors.23 = 0 ifOutErrors.24 = 0 ifOutQLen.1 = 0 ifOutQLen.2 = 0 ifOutQLen.3 = 0 ifOutQLen.4 = 0 ifOutQLen.5 = 0 ifOutQLen.6 = 0 ifOutQLen.7 = 0 ifOutQLen.8 = 0 ifOutQLen.9 = 0 ifOutQLen.10 = 0 ifOutQLen.11 = 0 ifOutQLen.12 = 0 ifOutQLen.13 = 0 ifOutQLen.14 = 0 ifOutQLen.15 = 0 ifOutQLen.16 = 0 ifOutQLen.17 = 0 ifOutQLen.18 = 0 ifOutQLen.19 = 0 ifOutQLen.20 = 0 ifOutQLen.21 = 0 ifOutQLen.22 = 0 ifOutQLen.23 = 0 ifOutQLen.24 = 0 ifSpecific.1 = zeroDotZero ifSpecific.2 = zeroDotZero ifSpecific.3 = zeroDotZero ifSpecific.4 = zeroDotZero ifSpecific.5 = zeroDotZero ifSpecific.6 = zeroDotZero ifSpecific.7 = zeroDotZero ifSpecific.8 = zeroDotZero ifSpecific.9 = zeroDotZero ifSpecific.10 = zeroDotZero ifSpecific.11 = zeroDotZero ifSpecific.12 = zeroDotZero ifSpecific.13 = zeroDotZero ifSpecific.14 = zeroDotZero ifSpecific.15 = zeroDotZero ifSpecific.16 = zeroDotZero ifSpecific.17 = zeroDotZero ifSpecific.18 = zeroDotZero ifSpecific.19 = zeroDotZero ifSpecific.20 = zeroDotZero ifSpecific.21 = zeroDotZero ifSpecific.22 = zeroDotZero ifSpecific.23 = zeroDotZero ifSpecific.24 = zeroDotZero root@observium:~# Regards Simon

4 6

Observium poller is becoming slow
by Ming Wong, CLSA 18 Sep '18

18 Sep '18

Hi, The polling time for each device is becoming long when more and more devices added to Observium. From the poller debug output most of the time is spent on SQL update. For a network switch, each port will trigger a SQL update. Is it possible for Observium to poll all ports first, and then have a single SQL update statement covering all ports ? Any advice in enhancing the polling speed or database performance ? Thanks and regards, Ming The content of this communication is intended for the recipient and is subject to CLSA Legal and Regulatory Notices. These can be viewed at https://www.clsa.com/disclaimer.html or sent to you upon request. Please consider before printing. CLSA is ISO14001 certified and committed to reducing its impact on the environment.

4 5

Cisco 3850 Stack
by Jacek.Dabrowski＠selgros.pl 17 Sep '18

17 Sep '18

Hello, Does anyone know why Observium cannot see stacking information from Cisco Cat 3850? In Catalyst 3750 and 9300 everything is fine. In Device Cisco- 3850 MIBs, CISCO-STACKWISE-MIB not exist !!! OiD showing correct information [cid:image003.png@01D44E66.F0517D10] >From 3850 [cid:image001.png@01D44E66.7CD631F0] >From 9300 [cid:image002.png@01D44E66.7CD631F0] Pozdrawiam Jacek Dąbrowski

2 4

unknown processor type
by Andi Felani 17 Sep '18

17 Sep '18

hi, this is the first time i know about observium last week i already install on debian 9 all device running well like cisco switch, cisco air, printer etc when i try monitoring windows that unknown processor type

5 11

problem in graphics of more than 1000 devices
by Wilbert Martínez López 17 Sep '18

17 Sep '18

hello can you please support me with the following situation I have, I installed Obervium in a virtual machine with 8 Gb of RAM and 8 cores, which have an Intel Xeon processor E5-1620 v3 at 3.50 Ghz, hard drive of 200 GB, has installed a version of Ubuntu 16.04.5 with Observium version CE17.9.0 when it had 30 devices added works well in terms of graphics, but when we added more antennas in total 1085 at the time it has become slow and also the graphics shows incomplete of any element, cpu, memory, ports, etc, the devices aggregates are radios of ubiquiti and mikrotik, I attach the images where it shows the commented of the graphics graph a month from a port graph to 6 hours a port the same situation occurs with the graphics of memory, processor, memory or any ports of all devices Wilbert.

9 20

snmpget on multiple OID fails on Eaton UPS
by Mailing Lists 14 Sep '18

14 Sep '18

We have around 22 Eaton UPS devices currently monitored on Observium and I have been investigating today why about 25% of them refuse to return a syslocation. It seems that the devices just don't reliably return snmpget when multiple OID are queried at once, at least for these objects. Specifically, when taking the following command from the poller debug and running it manually: /usr/bin/snmpget -t '4' -r '2' -v3 -l 'authPriv' -n '' -x 'DES' -X 'removed' -a 'MD5' -A 'removed' -u 'observium' -Pu -OQUs -m SNMPv2-MIB -M /opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp 'udp':'device':'161' sysUpTime.0 sysLocation.0 sysContact.0 sysName.0 The request times out even when increasing the timeout. When reducing the number of OID queried to 3 or less the device seems to respond: /usr/bin/snmpget -t '4' -r '2' -v3 -l 'authPriv' -n '' -x 'DES' -X 'removed' -a 'MD5' -A 'removed' -u 'observium' -Pu -OQUs -m SNMPv2-MIB -M /opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp 'udp':'device':'161' sysUpTime.0 sysLocation.0 sysContact.0 sysUpTime.0 = 0:0:31:01.19 sysLocation.0 = location sysContact.0 = user(a)example.com /usr/bin/snmpget -t '4' -r '2' -v3 -l 'authPriv' -n '' -x 'DES' -X 'removed' -a 'MD5' -A 'removed' -u 'observium' -Pu -OQUs -m SNMPv2-MIB -M /opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp 'udp':'device':'161' sysLocation.0 sysContact.0 sysName.0 sysLocation.0 = location sysContact.0 = user(a)example.com sysName.0 = device Is there a way to configure the behaviour to reduce the number of simultaneous OID requested to make this work reliably? Thanks, Tim C

4 15

Bills API
by MKS 14 Sep '18

14 Sep '18

Hello Has these been any requests of added more functions to the bill API? (create/update, delete, etc) Can I expect that this will be add in a near term future (e.g. this year) or does this have to be a professional services job to get this feature? Regards MKS

1 0

731 Revisions behind
by Thomas Steffensen 11 Sep '18

11 Sep '18

Hi, I am currently running: Version Information Observium CE 0.16.10.8128 (6th October 2016) OS Linux 3.2.0-4-amd64 [amd64] (Debian 7.11) Apache 2.2.22 (Debian) PHP 5.4.45-0+deb7u11 Python 2.7.3 MySQL 5.5.58-0+deb7u1 (extension: mysqli 5.5.58) SNMP NET-SNMP 5.4.3 RRDtool 1.4.7 And I would really like to upgrade to version 17.9.8859 which is 731 revisions ahead. However, being 2 years behind on updates I admit that I am having a little bit of an issue with the consequences of this. Is there any best practices I should follow or are there revisions that I should upgrade to first before going to the latest? Med venligst hilsen, Thomas Steffensen Network Administrator Parknet | Esromgade 15, opgang 1, 5. sal | 2200 København N | Phone +45 3690 6000 Mobil +45 4265 0504 | www.parknet.dk<http://www.parknet.dk/>

2 1

Juniper firewall MIB
by pierremarie.cossey＠orange.com 11 Sep '18

11 Sep '18

Hello Did you plan to implement JUNIPER-FIREWALL-MIB in next versions ? Thx for your answer Regards PM Envoyé de mon Galaxy S8 Orange _________________________________________________________________________________________________________________________ Ce message et ses pieces jointes peuvent contenir des informations confidentielles ou privilegiees et ne doivent donc pas etre diffuses, exploites ou copies sans autorisation. Si vous avez recu ce message par erreur, veuillez le signaler a l'expediteur et le detruire ainsi que les pieces jointes. Les messages electroniques etant susceptibles d'alteration, Orange decline toute responsabilite si ce message a ete altere, deforme ou falsifie. Merci. This message and its attachments may contain confidential or privileged information that may be protected by law; they should not be distributed, used or copied without authorisation. If you have received this email in error, please notify the sender and delete this message and its attachments. As emails may be altered, Orange is not liable for messages that have been modified, changed or falsified. Thank you.

3 3

Re: [Observium] TP-Link switches freeze with new Observium CE
by Mike Stupalov 10 Sep '18

10 Sep '18

Hrm, on all my tested TP-Link switches this feature improved polling speed. That why separate_walk feature for this os enabled. But such problems are certainly unacceptable, I will disable that for os. Anyway, if you have not so many devices, goto device edit page -> Modules -> disable 'separate_walk' option. > Attila Nagy <mailto:tylla_at_memetic.org@tylla.hu> > 7 September 2018 at 19:31 > Hi List! > > Firstly our appreciations go to the team for the new CE version. > Thanks a lot! > > Now the somewhat bitter part: we updated yesterday evening to the > latest CE version and today morning we were confronted with the > problem that a few Tp-Link switches have frozen. To be more precise, > only the management part was frozen, so the switch was degraded to a > dumb non-manageable switch. After reboot the switches return to full > function only to freeze again on next SNMP poll. > > The switches in question are all T1600G-28TS or T1600G-28PS > (poor-man's manageable gigabit switches :-)) > There is no newer firmware update available for them. > They worked perfectly with the previous CE version up until the update. > > We have other Tp-Link switches which are not affected by the same > problem: TL-SG2424, TL-SG2216, TL-SG2008. > > > We tried to narrow down the problem, and it seems that discovery works > as it should, the freeze enacts during the polling, more exactly when > the ports module runs. Looking at the debug log the following command > produces the freeze: > /usr/bin/snmpget -v2c -c 'public' -Pu -OQUs -m IF-MIB -M > /opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp > 'udp':'switch-test':'161' ifInMulticastPkts.1 ifOutMulticastPkts.1 > ifInBroadcastPkts.1 ifOutBroadcastPkts.1 ifHCInOctets.1 > ifHCOutOctets.1 ifHCInUcastPkts.1 ifHCOutUcastPkts.1 > ifHCInMulticastPkts.1 ifHCOutMulticastPkts.1 ifHCInBroadcastPkts.1 > ifHCOutBroadcastPkts.1 ifInOctets.1 ifOutOctets.1 ifInUcastPkts.1 > ifOutUcastPkts.1 ifInNUcastPkts.1 ifOutNUcastPkts.1 ifInDiscards.1 > ifOutDiscards.1 ifInErrors.1 ifOutErrors.1 ifInUnknownProtos.1 ifMtu.1 > ifSpeed.1 ifPhysAddress.1 ifAdminStatus.1 ifLastChange.1 > ifPromiscuousMode.1 ifConnectorPresent.1 > > From here onward there is no SNMP response from the switch, the SYS > LED stops blinking and is frozen in whichever state it was, and there > is no network connectivity to the switch (does not respond to ping and > the management interface is inaccessible). The dumb switch hardware > was still working for some time, but this was inconsistent, some > switches have frozen to a complete halt some time after, while others > were still working as dumb switches. As these are under constant load > we didn't had the time to more thoroughly investigate on them, we > restored their functionality and disabled them in Observium. > We have one extra hardware that we can put online for testing if needed. > > > My questions would be: > - Should I include a full debug log or the above info is enough? > - Has anyone met the same problem/has a solution to it? > - Can we know what was changed on the above command line, so maybe as > a workaround we can disable that single feature? > - I suspect this is a firmware issue, but I am not sure (that's why > I'm asking here first, here I have way bigger chances to receive > meaningful answers compared to Tp-Link's support), maybe somebody can > help me narrow down the firmware bug if it is really one. > > Thank you guys in advance. > > Best regards, > Tylla > > > > _______________________________________________ > observium mailing list > observium(a)observium.org > http://postman.memetic.org/cgi-bin/mailman/listinfo/observium -- Mike Stupalov https://stupalov.com -- Mike Stupalov Observium Limited, http://observium.org

4 4

Observium site blank after logging in
by Stallings, Breisch 10 Sep '18

10 Sep '18

I've acquired an Observium implementation, which worked perfectly fine a few months ago. Nothing that I know of has changed over the past few months. Now we can get to the login screen as usual. As soon as you enter your credentials and login, the very next screen is completely blank and nothing appears. We've rebooted the box several times. Today I upgraded to the latest release - 9431. I'm not very proficient working through Linux troubleshooting, which is was the base OS is. Has anyone else seen this issue and possibly how to troubleshoot/resolve it? Thank You. ****************************************************************************************** This message may contain confidential or proprietary information intended only for the use of the addressee(s) named above or may contain information that is legally privileged. If you are not the intended addressee, or the person responsible for delivering it to the intended addressee, you are hereby notified that reading, disseminating, distributing or copying this message is strictly prohibited. If you have received this message by mistake, please immediately notify us by replying to the message and delete the original message and any copies immediately thereafter. Thank you. ****************************************************************************************** CLLD

2 1

bng_active_sessions not graphed anymore
by Klimek, Denis 10 Sep '18

10 Sep '18

Hi, can someone help me to debug the graphing of "bng_active_sessions"? Which module is responsible etc pp? I noticed that Observium stopped graphing it for every Cisco ASR device for already 2 weeks. Based on our logfiles there was no update at that time. Mit freundlichem Gruß Stadtwerke Norderstedt Denis Klimek Professional Network Engineer IP-Systemtechnik Tel: 040 / 521 04 - 1049 Mobil: 0151 / 652 219 06 dklimek(a)stadtwerke-norderstedt.de<mailto:dklimek@stadtwerke-norderstedt.de> www.stadtwerke-norderstedt.de<http://www.stadtwerke-norderstedt.de/>

2 1

Add UPS-MIB to Mikrotik discovery
by Kaiser, Erich 09 Sep '18

09 Sep '18

Any chance you can add the UPS-MIB to the mikrotik discovery? A lot of guys are using the mikrotik to monitor UPS via USB/serial. Sincerely, Erich Kaiser The Fusion Network erich(a)gotfusion.net Office: 815-570-3101

2 3

Re: [Observium] Devices not being discovered
by Michael 08 Sep '18

08 Sep '18

The answer is in the CLI output when you tried adding the device there. ==== # ./add_device.php jr01 home v2c 161 udp Observium CE 18.9.9420 Add Device(s) Try to add jr01: Trying v2c community *** [0] ... No reply on given community *** using v2c. Could not reach jr01 with given SNMP parameters using v2c. Devices failed: 1. ==== Your device is not answering your SNMP queries. I'd start by checking the following: - wrong community string - wrong dns/hosts entry - snmpd on the target not listening/bound correctly for remote v2c queries - local firewall on target device Cheers, Michael > On 8 Sep 2018, at 1:17 pm, Michael <michael(a)smarsz.com> wrote: > > The answer is in the CLI output when you tried adding the device there. > > > ==== > # ./add_device.php jr01 home v2c 161 udp > Observium CE 18.9.9420 > Add Device(s) > > Try to add jr01: > Trying v2c community *** [0] ... > No reply on given community *** using v2c. > Could not reach jr01 with given SNMP parameters using v2c. > Devices failed: 1. > ==== > > > Your device is not answering your SNMP queries. I'd start by checking the following: > > - wrong community string > - wrong dns/hosts entry > - snmpd on the target not listening/bound correctly for remote v2c queries > - local firewall on target device > > > Cheers, > > Michael > > > > > > > > >> On 8 Sep 2018, at 10:42 am, Adam Armstrong <adama(a)memetic.org> wrote: >> >> No, I mean that poller run was pointless because how are you going to poll something which isn't even in observium? >> >> Adam. >> >> Sent from BlueMail >> On 8 Sep 2018, at 01:01, Roland Hill <roland.lists(a)hillnet.co.nz> wrote: >> On Fri, 07 Sep 2018 or thereabouts, Adam Armstrong came forth with: >> >> You do not have any devices in the database called "jr01". >> >> I deleted jr01 yesterday thinking that re-adding it might magically fix >> whatever the issue is. >> >> jr01 exists, can be founf on the network and has snmp running. >> >> ==== >> # fping jr01 >> jr01 is alive >> >> # systemctl status snmpd >> ● snmpd.service - Simple Network Management Protocol (SNMP) Daemon. >> Loaded: loaded (/lib/systemd/system/snmpd.service; enabled; vendor preset: enabled) >> Active: active (running) since Fri 2018-09-07 17:59:00 NZST; 17h ago >> Process: 1118 ExecStartPre=/bin/mkdir -p /var/run/agentx (code=exited, status=0/SUCCESS) >> Main PID: 1121 (snmpd) >> Tasks: 1 (limit: 4915) >> CGroup: /system.slice/snmpd.service >> └─1121 /usr/sbin/snmpd -Lsd -Lf /dev/null -u Debian-snmp -g Debian-snmp -I -smux mteTrigger mteTriggerConf -f >> >> >> # ps aux | grep snmpd >> Debian-+ 1121 0.0 0.1 65024 11364 ? Ss Sep07 0:44 /usr/sbin/snmpd -Lsd -Lf /dev/null -u Debian-snmp -g Debian-snmp -I -smux mteTrigger mteTriggerConf -f >> >> ==== >> >> Adding the device jr01 from the command line fails: >> >> ==== >> # ./add_device.php jr01 home v2c 161 udp >> Observium CE 18.9.9420 >> Add Device(s) >> >> Try to add jr01: >> Trying v2c community *** [0] ... >> No reply on given community *** using v2c. >> Could not reach jr01 with given SNMP parameters using v2c. >> Devices failed: 1. >> ==== >> >> I'm out of idea's but will go back to first principles and walk the >> install guide again just in case I have overlooked anything. jr01 has >> previously been discovered okay, but maybe I changed something and don't >> remember. >> >> I appreciate your help Adam. >> _______________________________________________ >> observium mailing list >> observium(a)observium.org >> http://postman.memetic.org/cgi-bin/mailman/listinfo/observium >

3 3

Devices not being discovered
by Roland Hill 08 Sep '18

08 Sep '18

Hi all, I've been running the CE version of Observium for a few years now, always upgrading as the new releases come out. Earlier this year my server hosting Observium updated to Ubuntu 18.04 and php7x. As previously raised on list, this was incompatible with the previous CE version. No problem, I waited it out. Now my issue. Since upgrading to the latest CE version, 5 out of my 7 devices (home network) are no longer being discovered. I can confirm DNS is working. I've debugged as much as I can, including reinstalling snmpd on the Ubuntu boxes. The devices which are staying down are my Ubuntu boxes and Unifi AP and Secure gateway. Any direction on debugging would be greatly appreciated. -- Regards, Roland

2 11

TP-Link switches freeze with new Observium CE
by Attila Nagy 07 Sep '18

07 Sep '18

Hi List! Firstly our appreciations go to the team for the new CE version. Thanks a lot! Now the somewhat bitter part: we updated yesterday evening to the latest CE version and today morning we were confronted with the problem that a few Tp-Link switches have frozen. To be more precise, only the management part was frozen, so the switch was degraded to a dumb non-manageable switch. After reboot the switches return to full function only to freeze again on next SNMP poll. The switches in question are all T1600G-28TS or T1600G-28PS (poor-man's manageable gigabit switches :-)) There is no newer firmware update available for them. They worked perfectly with the previous CE version up until the update. We have other Tp-Link switches which are not affected by the same problem: TL-SG2424, TL-SG2216, TL-SG2008. We tried to narrow down the problem, and it seems that discovery works as it should, the freeze enacts during the polling, more exactly when the ports module runs. Looking at the debug log the following command produces the freeze: /usr/bin/snmpget -v2c -c 'public' -Pu -OQUs -m IF-MIB -M /opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp 'udp':'switch-test':'161' ifInMulticastPkts.1 ifOutMulticastPkts.1 ifInBroadcastPkts.1 ifOutBroadcastPkts.1 ifHCInOctets.1 ifHCOutOctets.1 ifHCInUcastPkts.1 ifHCOutUcastPkts.1 ifHCInMulticastPkts.1 ifHCOutMulticastPkts.1 ifHCInBroadcastPkts.1 ifHCOutBroadcastPkts.1 ifInOctets.1 ifOutOctets.1 ifInUcastPkts.1 ifOutUcastPkts.1 ifInNUcastPkts.1 ifOutNUcastPkts.1 ifInDiscards.1 ifOutDiscards.1 ifInErrors.1 ifOutErrors.1 ifInUnknownProtos.1 ifMtu.1 ifSpeed.1 ifPhysAddress.1 ifAdminStatus.1 ifLastChange.1 ifPromiscuousMode.1 ifConnectorPresent.1 From here onward there is no SNMP response from the switch, the SYS LED stops blinking and is frozen in whichever state it was, and there is no network connectivity to the switch (does not respond to ping and the management interface is inaccessible). The dumb switch hardware was still working for some time, but this was inconsistent, some switches have frozen to a complete halt some time after, while others were still working as dumb switches. As these are under constant load we didn't had the time to more thoroughly investigate on them, we restored their functionality and disabled them in Observium. We have one extra hardware that we can put online for testing if needed. My questions would be: - Should I include a full debug log or the above info is enough? - Has anyone met the same problem/has a solution to it? - Can we know what was changed on the above command line, so maybe as a workaround we can disable that single feature? - I suspect this is a firmware issue, but I am not sure (that's why I'm asking here first, here I have way bigger chances to receive meaningful answers compared to Tp-Link's support), maybe somebody can help me narrow down the firmware bug if it is really one. Thank you guys in advance. Best regards, Tylla

2 1

Power Outage
by Ricardo Franco Cantero 06 Sep '18

06 Sep '18

Hi, What would be the best way to measure for a power outage? I see that there is a sensor for voltage. Would a Min Warn value trigger it on time to send a alert? Met vriendelijke groet, Ricardo Franco Cantero

3 2

Alert my customers
by Ricardo Franco Cantero 05 Sep '18

05 Sep '18

Hi, We monitor our clients through Observium. I wanted to know how I can add individual alert contacts so when a connection of a customer goes down, it sends an alert to us but also directly to the client who's affected. Met vriendelijke groet, Ricardo Franco Cantero

2 1

Association Ruleset
by Ricardo Franco Cantero 05 Sep '18

05 Sep '18

Hi, When I add an alert checker, now I need to add an Association Ruleset. It didn't used to ask for one and I can't seem to find the option to select all, like with the * How do I achieve this? Met vriendelijke groet, Ricardo Franco Cantero

2 1

BGP prefixes graphs not in menus anymore.
by Erwin Botas 05 Sep '18

05 Sep '18

Hi, I’m using professional version and in the latest version, I lost the option to visualize the BGP prefixes, anybody has the same issue? On the poller logs the information is still there. Regards, Erwin Erwin Botas Gerente infraestructura [http://www.criticalcolocation.com/firma/logo.jpg] Tel.: +506 2010-5050 • Cel.: +506 8982-4885 • Fax.: +506 2223-7055 San José, CR • www.criticalcolocation.com [http://www.criticalcolocation.com/firma/line.jpg] NOTA DE CONFIDENCIALIDAD: "La información contenida en este mensaje y sus adjuntos es estrictamente confidencial y se dirige exclusivamente a su destinatario. Si usted no es el destinatario indicado, cualquier divulgación, copia, distribución o uso del contenido de este documento es prohibido y será sancionado de acuerdo con la ley. Si recibió este mensaje por error, debe notificarlo de inmediato al remitente y destruirlo".

3 4

New Observium CE 18.9
by Adam Armstrong 05 Sep '18

05 Sep '18

We've just released the new version of Observium CE, 18.9. This release is based on SVN revision 9411 and includes 552 separate commits covering ~50k changed lines of code since the previous release. The new release can be downloaded from http://www.observium.org and upgrade instructions are at http://www.observium.org/docs/updating/#upgrade-to-latest-major-release Changelogs are : https://docs.observium.org/changelog/ http://www.observium.org/svn.log Thanks, adam.

7 15