- observium - lists.observium.org

Localization
by Luca Sasdelli 30 Aug '18

30 Aug '18

Hi, our customers are almost all non-english speaking, therefore I'd like to offer them a localized interface. is it planned some localization for Observium? Could we contribute in some way to italian translation? Best Luca

4 4

HP Procurve - dot1q and OSFP
by Christian Eriksson 29 Aug '18

29 Aug '18

Hi, 1. dot1Q All interfaces whether they be untagged or tagged, are marked as dot1q in the UI I have attached a debug of a device from the modules "ports" and "vlan"(debug.txt). Also a show vlan <id>(showvlan.txt) to prove that they really are untagged ;) 1. OSPF A lot of devices with no OSPF configuration have a routing button with OSPF in the UI(see attached file OSPF.png). Debug file is also attached(ospf_debug.txt) Output from show command [cid:image001.png@01D43FC7.747651A0] If you think I should open a JIRA case instead, i'll do it Running 18.8.9405 Regards Christian

1 0

Location mass edit
by Luca Sasdelli 29 Aug '18

29 Aug '18

Hi all, should I change the location of a whole 42U-rack equipments to a new one, does it exist any tool to do it in a single-shot? Or should I operate on the db? (or to uniquely name the racks, but this is another affair) Thanks Luca

3 4

ifIndex IPv4 addresses
by Christian Eriksson 29 Aug '18

29 Aug '18

Hi, I think this used to work before? IPv4 address tab doesn't show the interface name anymore, but instead ifIndex value. Under details I can see the ifName and IPv4 address correlation Running 18.8.9403 Vänliga hälsningar / Best regards, [Advania_Trappa_CMYK] Christian Eriksson System Consultant [cid:image003.png@01D43F94.18030DB0]<mailto:christian.eriksson@advania.se>[Advania-Bikupa Facebook]<https://www.facebook.com/advania.se/>[Advania-Bikupa LinkedIn]<https://www.linkedin.com/company/advania-ab/>[Advania-Bikupa Twitter]<https://twitter.com/advania_se> +4641090488<tel:+4641090488> | +46761400400<tel:+46761400400> www.advania.se<http://www.advania.se/> | Stockholm<https://www.google.se/maps/place/Advania+Sverige+AB/@59.3062176,18.0278762,…>

3 5

ifindex instead of ports
by Tomasz Karczewski 29 Aug '18

29 Aug '18

I noticed that i see ifindex instead of ports in ip address search page. When i manually discovered devices i see logs: Invalid arguments passed into function get_port_by_index_cache(). Please report to developers. So i'm reporting. Tomasz Karczewski Administrator Sieci tkarczewski(a)man.olsztyn.pl http://www.man.olsztyn.pl http://www.uwm.edu.pl tel. (89) 523 45 55 fax. (89) 523 43 47 Ośrodek Eksploatacji i Zarządzania Miejską Siecią Komputerową OLMAN w Olsztynie Uniwersytet Warmińsko-Mazurski w Olsztynie

2 1

Polling times grew a lot upgrading to 18.8.9403 from 18.7.9337
by Silvio del Val Hinojal 29 Aug '18

29 Aug '18

Hello, This morning I upgraded our Observium Pro machines from prior version 18.7.9337 to last 18.8.9403 and, since then, polling times growed by almost 3 or 4 times: [cid:image003.jpg@01D43ED6.AFE37570] I upgraded using "svn update" in our polling machines and "discovery.php -u" to upgrade DB schema. I even tried to activate "$config['snmp']['max-rep'] = TRUE;" with no luck. What should I change to fix this times? Regards, Silvio [cid:image001.png@01D03B1C.E8E96F80]<http://www.pandasecurity.com/spain/> Silvio del Val Systems Engineer - Panda Security +34 944 343 728 silvio.delval(a)pandasecurity.com<mailto:silvio.delval@pandasecurity.com> pandasecurity.com<http://www.pandasecurity.com/> This e-mail contains confidential information owned by Panda Security. Any such copy, or use, or distribution or disclosure of its contents is strictly forbidden. Please notify us immediately at our phone number (+34 94 425 11 00) if you receive this e-mail and are not its consignee, and then delete this message from your system without copying it, distributing it, or disclosing its contents P Before printing this message, please make sure it is really necessary

5 7

Get more information on Dashboard for Process consumption
by Kaustubh Parthasarthy, CLSA 29 Aug '18

29 Aug '18

I have been using observium for few months now. I wanted some info from the graphs that observium spins off. Following is the graphs for running process consumption: [cid:image001.png@01D43EAC.03C3D610] Can I get something like top 10 process graphs? Let me give you an example, I sometimes get requests from folks asking, "Ok my memory utilization on a server ABC was 90% on this particular day. Can we get list of processes consuming high memory on that particular day ? " So as per this, can I customize the graph to get process level info ? Kaustubh Parthasarthy Analyst, Production Management Group D +91 20 6646 8625 | M +91 989 284 4625 | T +91 20 6646 8888 4/F, C-Wing, Panchshil Tech Park-1, Yerawada, Pune 411006, India [:1. Social Media Icons:CLSA_Social Media Icons_linkedin.png]<https://hk.linkedin.com/company/clsa>[:1. Social Media Icons:CLSA_Social Media Icons_twitter.png]<https://twitter.com/clsainsights?lang=en>[:1. Social Media Icons:CLSA_Social Media Icons_youtube.png]<https://www.youtube.com/channel/UC0qWp_lLnOcRYmBlCNQgZKA>[:1. Social Media Icons:CLSA_Social Media Icons_facebook.png]<https://www.facebook.com/clsacommunity/> clsa.com<https://www.clsa.com/> Insights. Liquidity. Capital. [CLSA_RGB]<https://www.clsa.com/member> A CITIC Securities Company The content of this communication is intended for the recipient and is subject to CLSA Legal and Regulatory Notices. These can be viewed at https://www.clsa.com/disclaimer.html or sent to you upon request. Please consider before printing. CLSA is ISO14001 certified and committed to reducing its impact on the environment.

6 17

Observium Database
by Kaustubh Parthasarthy, CLSA 28 Aug '18

28 Aug '18

Hi Team, I have implemented observium in my environment. I wanted to look at some background scripts etc which gets the performance data like CPU, memory etc. For that I like to check the MYSQL database. Can someone please guide me if there is a way I can get access to the DB and have a look and also where the scripts are stored ? Regards Kaustubh Kaustubh Parthasarthy Analyst, Production Management Group D +91 20 6646 8625 | M +91 989 284 4625 | T +91 20 6646 8888 4/F, C-Wing, Panchshil Tech Park-1, Yerawada, Pune 411006, India [:1. Social Media Icons:CLSA_Social Media Icons_linkedin.png]<https://hk.linkedin.com/company/clsa>[:1. Social Media Icons:CLSA_Social Media Icons_twitter.png]<https://twitter.com/clsainsights?lang=en>[:1. Social Media Icons:CLSA_Social Media Icons_youtube.png]<https://www.youtube.com/channel/UC0qWp_lLnOcRYmBlCNQgZKA>[:1. Social Media Icons:CLSA_Social Media Icons_facebook.png]<https://www.facebook.com/clsacommunity/> clsa.com<https://www.clsa.com/> Insights. Liquidity. Capital. [CLSA_RGB]<https://www.clsa.com/member> A CITIC Securities Company The content of this communication is intended for the recipient and is subject to CLSA Legal and Regulatory Notices. These can be viewed at https://www.clsa.com/disclaimer.html or sent to you upon request. Please consider before printing. CLSA is ISO14001 certified and committed to reducing its impact on the environment.

3 3

Dashboards
by Cederlund Tobias 27 Aug '18

27 Aug '18

Hi (...threw the to the list yesterday, but it didn't came through...) A few months ago I noticed the appearance of a "Default Dashboard" under Overview in the menu. There's also a nice "Add to Dashboard" button on graph-pages to add the graph to a dashboard. This seems like a fantastic feature but right now there only the "Default Dashboard". Is it possible add more dashboards? ...and if so, how? I also haven't seen any documentation of this very nice feature. Is there any? We're on 18.8.9355 Best regards, Tobias

4 4

UPS autodiscovery
by Eric W. Bates 24 Aug '18

24 Aug '18

What flavor UPS'en do folks find work best with Observium? The brand I'm using now doesn't support lldp or cdp and I haven't been able to collect anything. -- Clark 159a, MS 46 508/289-3112

3 4

Re: [Observium] Static routes
by Mike Stupalov 23 Aug '18

23 Aug '18

This is huge.. NO, really very huge tables. Discovery can fetch this table more than 10-20-30 mins. I already was test with such ability, many devices just did stop respond after try to fetch this table. > Klimek, Denis <mailto:DKlimek@Stadtwerke-Norderstedt.de> > 23 August 2018 at 13:55 > > Hi, > > what is your opinion about extracting also the static configured > routes from the device? > > Possible SNMP OID would be .1.3.6.1.2.1.4.24.7 > > We have the case that multiple prefixes are staticly configured and > that we are able to fetch them in the Observium database for 3^rd > party purposes that we built around. > > I know that pulling the routes from a device with a BGP full route > takes a lot of time, but maybe it can be implemented into the > discovery module instead of the poller. > > A way to ignore BGP or to exclude everything except static is not > known so far…. From my side. > > Mit freundlichem Gruß > > Stadtwerke Norderstedt > > *Denis Klimek* > > Professional Network Engineer > > IP-Systemtechnik > > Tel: 040 / 521 04 – 1049 > > Mobil: 0151 / 652 219 06 > > dklimek(a)stadtwerke-norderstedt.de > <mailto:dklimek@stadtwerke-norderstedt.de> > > www.stadtwerke-norderstedt.de <http://www.stadtwerke-norderstedt.de/> > > > > _______________________________________________ > observium mailing list > observium(a)observium.org > http://postman.memetic.org/cgi-bin/mailman/listinfo/observium -- Mike Stupalov Observium Limited, http://observium.org

2 1

Dashboards
by Cederlund Tobias 23 Aug '18

23 Aug '18

Hi A few months ago I noticed the appearance of a "Default Dashboard" under Overview in the menu. There's also a nice "Add to Dashboard" button on graph-pages to add the graph to a dashboard. This seems like a fantastic feature but right now there only the "Default Dashboard". Is it possible add more dashboards? ...and if so, how? I also haven't seen any documentation of this very nice feature. Are there any? Med vänlig hälsning Tobias Cederlund Systemspecialist Driftstöd Länsstyrelsernas IT-avdelning 351 86 VÄXJÖ Besök: Kungsgatan 8, Växjö 010 - 224 44 61 (+46 10 - 224 44 61) 070 - 524 85 57 (+46 70 - 524 85 57) tobias.cederlund(a)lansstyrelsen.se<mailto:tobias.cederlund@lansstyrelsen.se> www.lansstyrelsen.se/vastragotaland<http://www.lansstyrelsen.se/vastragotaland>

1 0

Hardware showing as generic not openvz
by Simon Mousey Smith 23 Aug '18

23 Aug '18

Hi All Im trying to work out if im being stupid or something isnt right? Some machines we monitor are showing the hardware as 'OpenVZ Containers' but others are being found as 'Generic x86' I have installed the distro script on all the machines and im using the latest version 2.0 script Output from one of the machines which is an openvz container - Linux|4.4.0|amd64|Ubuntu|16.04||openvz Am I missing something? Regards Simon

2 2

Static routes
by Klimek, Denis 23 Aug '18

23 Aug '18

Hi, what is your opinion about extracting also the static configured routes from the device? Possible SNMP OID would be .1.3.6.1.2.1.4.24.7 We have the case that multiple prefixes are staticly configured and that we are able to fetch them in the Observium database for 3rd party purposes that we built around. I know that pulling the routes from a device with a BGP full route takes a lot of time, but maybe it can be implemented into the discovery module instead of the poller. A way to ignore BGP or to exclude everything except static is not known so far.... From my side. Mit freundlichem Gruß Stadtwerke Norderstedt Denis Klimek Professional Network Engineer IP-Systemtechnik Tel: 040 / 521 04 - 1049 Mobil: 0151 / 652 219 06 dklimek(a)stadtwerke-norderstedt.de<mailto:dklimek@stadtwerke-norderstedt.de> www.stadtwerke-norderstedt.de<http://www.stadtwerke-norderstedt.de/>

1 0

Ricoh private MIB
by Mike Stupalov 22 Aug '18

22 Aug '18

Someone can get RicohPrivateMIB from an restricted vendor area? RICOH places in open access only PDF file with mib description. > Mike Stupalov <mailto:mike@observium.org> > 22 August 2018 at 09:39 > Haha, new words for learn: zaebis', pizdetc > > I did not plan on writing it.. but a small insomnia :D > Mike Stupalov <mailto:mike@observium.org> > 22 August 2018 at 03:01 > Hi, > > do not post here links to an *nms urls/issues ;) > > Ricoh is very hidden vendor.. No ways for fetch latest private MIB. > > But I was added toner/ink discovery for Ricoh in r9379 :P > -- Mike Stupalov Observium Limited, http://observium.org

2 1

Custom OID Metric Conditions (now with 100% more attachment)
by Brandwatch NOC 22 Aug '18

22 Aug '18

Hi, The attached image shows some custom OIDs I have set up to monitor Juniper QFX VCP link status. These work fine and I see the custom graphs (gauges where state 1 = link up, state 0 = link down). The last bit I need to figure out is how to alert on them. I think I'm 90% of the way there. You can see the custom OIDs in the top browser window. In the bottom browser window, I'm unsure how to refer to the custom OIDs in the "conditions" bit. Any help gratefully accepted - I've got this far without bothering anyone but I've fallen at the last hurdle. Thanks! Chris -- Chris Tomkins Brandwatch | Senior Network Engineer (Linux/Network) christ(a)brandwatch.com | (+44) 01273 448 949 @Brandwatch New York | San Francisco | Brighton | Singapore | Berlin | Stuttgart Discover how organizations are using Brandwatch to create their own success <https://www.brandwatch.com/customer-success/> Email disclaimer <http://www.brandwatch.com/email-disclaimer/> [image: bw-signature logo.png]

1 0

Custom OID Metric Conditions
by Brandwatch NOC 22 Aug '18

22 Aug '18

Hi, The attached image shows some custom OIDs I have set up to monitor Juniper QFX VCP link status. These work fine and I see the custom graphs (gauges where state 1 = link up, state 0 = link down). The last bit I need to figure out is how to alert on them. I think I'm 90% of the way there. You can see the custom OIDs in the top browser window. In the bottom browser window, I'm unsure how to refer to the custom OIDs in the "conditions" bit. Any help gratefully accepted - I've got this far without bothering anyone but I've fallen at the last hurdle. Thanks! Chris -- Chris Tomkins Brandwatch | Senior Network Engineer (Linux/Network) christ(a)brandwatch.com | (+44) 01273 448 949 @Brandwatch New York | San Francisco | Brighton | Singapore | Berlin | Stuttgart Discover how organizations are using Brandwatch to create their own success <https://www.brandwatch.com/customer-success/> Email disclaimer <http://www.brandwatch.com/email-disclaimer/> [image: bw-signature logo.png]

1 0

Re: [Observium] Show ink levels for Ricoh printers
by Mike Stupalov 22 Aug '18

22 Aug '18

Hi, do not post here links to an *nms urls/issues ;) Ricoh is very hidden vendor.. No ways for fetch latest private MIB. But I was added toner/ink discovery for Ricoh in r9379 :P > Simon Mousey Smith <mailto:simonsmith5521@gmail.com> > 21 August 2018 at 16:48 > Hi All > > This is a message to ask people can they try these SNMP OIDs in the > link below on there Ricoh printers? > > We have a few Ricoh printers that just show SOME SPACE in observium > and would love to see values! > > I discovered this link by accident and they appear to be working on > our few printers! > > Currently using the printer-mib only reveilles -3, -2, -1 which isnt > helpful... > > But the link below uses ricohs private mib which appears to work! > > https://github.com/librenms/librenms/issues/4177#issuecomment-241957542 > > If they work for others, could the wonderful amazing observium team > implement these oids into the existing checker to show stats :) > > Regards > > Simon - Hestor Ltd > > > _______________________________________________ > observium mailing list > observium(a)observium.org > http://postman.memetic.org/cgi-bin/mailman/listinfo/observium -- Mike Stupalov Observium Limited, http://observium.org

2 2

Re: [Observium] db.log - Failed dbQuery
by Mike Stupalov 21 Aug '18

21 Aug '18

I think should be fixed in r9378. > Aaron Mayfield <mailto:amayfield@neverfail.com> > 21 August 2018 at 03:22 > > I recently noticed my db.log file had grown to 18GB in size (I noticed > because it filled my drive). It is filled by entries like this: > > [2018/08/20 14:11:56 -0500] poller.php(12451): Failed dbQuery (#1062 - > Duplicate entry '88-2320-005056a94437-223078' for key > 'dev_vlan_mac_port'), Query: INSERT INTO `vlans_fdb` > (`device_id`,`vlan_id`,`port_id`,`mac_address`,`fdb_status`) VALUES > ('88','2320','223078','005056a94437','') > > [2018/08/20 14:11:56 -0500] poller.php(12451): Failed dbQuery (#1062 - > Duplicate entry '88-3004-005056a93130-223078' for key > 'dev_vlan_mac_port'), Query: INSERT INTO `vlans_fdb` > (`device_id`,`vlan_id`,`port_id`,`mac_address`,`fdb_status`) VALUES > ('88','3004','223078','005056a93130','') > > [2018/08/20 14:11:56 -0500] poller.php(12451): Failed dbQuery (#1062 - > Duplicate entry '88-3031-0050565b341c-223078' for key > 'dev_vlan_mac_port'), Query: INSERT INTO `vlans_fdb` > (`device_id`,`vlan_id`,`port_id`,`mac_address`,`fdb_status`) VALUES > ('88','3031','223078','0050565b341c','') > > It continues to quickly grow and log entries all for different > devices/mac addresses/vlans. Anyone else run into this recently? > > Here is version info (I updated today to make sure there wasn’t a > recent fix): > > > > > > _______________________________________________ > observium mailing list > observium(a)observium.org > http://postman.memetic.org/cgi-bin/mailman/listinfo/observium -- Mike Stupalov Observium Limited, http://observium.org

2 1

Load Average alert
by Remco de h 21 Aug '18

21 Aug '18

Hi, Is it possible to create an load average alert if some threshold is reach? Thank you in advance. Regards, Remco

4 10

Show ink levels for Ricoh printers
by Simon Mousey Smith 21 Aug '18

21 Aug '18

Hi All This is a message to ask people can they try these SNMP OIDs in the link below on there Ricoh printers? We have a few Ricoh printers that just show SOME SPACE in observium and would love to see values! I discovered this link by accident and they appear to be working on our few printers! Currently using the printer-mib only reveilles -3, -2, -1 which isnt helpful... But the link below uses ricohs private mib which appears to work! https://github.com/librenms/librenms/issues/4177#issuecomment-241957542 <https://github.com/librenms/librenms/issues/4177#issuecomment-241957542> If they work for others, could the wonderful amazing observium team implement these oids into the existing checker to show stats :) Regards Simon - Hestor Ltd

1 0

Re: [Observium] db.log - Failed dbQuery
by Mike Stupalov 21 Aug '18

21 Aug '18

Hi, please attach polling debug for: ./poller.php -d -m fdb-table -h 88 > Aaron Mayfield <mailto:amayfield@neverfail.com> > 21 August 2018 at 03:22 > > I recently noticed my db.log file had grown to 18GB in size (I noticed > because it filled my drive). It is filled by entries like this: > > [2018/08/20 14:11:56 -0500] poller.php(12451): Failed dbQuery (#1062 - > Duplicate entry '88-2320-005056a94437-223078' for key > 'dev_vlan_mac_port'), Query: INSERT INTO `vlans_fdb` > (`device_id`,`vlan_id`,`port_id`,`mac_address`,`fdb_status`) VALUES > ('88','2320','223078','005056a94437','') > > [2018/08/20 14:11:56 -0500] poller.php(12451): Failed dbQuery (#1062 - > Duplicate entry '88-3004-005056a93130-223078' for key > 'dev_vlan_mac_port'), Query: INSERT INTO `vlans_fdb` > (`device_id`,`vlan_id`,`port_id`,`mac_address`,`fdb_status`) VALUES > ('88','3004','223078','005056a93130','') > > [2018/08/20 14:11:56 -0500] poller.php(12451): Failed dbQuery (#1062 - > Duplicate entry '88-3031-0050565b341c-223078' for key > 'dev_vlan_mac_port'), Query: INSERT INTO `vlans_fdb` > (`device_id`,`vlan_id`,`port_id`,`mac_address`,`fdb_status`) VALUES > ('88','3031','223078','0050565b341c','') > > It continues to quickly grow and log entries all for different > devices/mac addresses/vlans. Anyone else run into this recently? > > Here is version info (I updated today to make sure there wasn’t a > recent fix): > > > > > > _______________________________________________ > observium mailing list > observium(a)observium.org > http://postman.memetic.org/cgi-bin/mailman/listinfo/observium -- Mike Stupalov Observium Limited, http://observium.org

1 0

db.log - Failed dbQuery
by Aaron Mayfield 20 Aug '18

20 Aug '18

I recently noticed my db.log file had grown to 18GB in size (I noticed because it filled my drive). It is filled by entries like this: [2018/08/20 14:11:56 -0500] poller.php(12451): Failed dbQuery (#1062 - Duplicate entry '88-2320-005056a94437-223078' for key 'dev_vlan_mac_port'), Query: INSERT INTO `vlans_fdb` (`device_id`,`vlan_id`,`port_id`,`mac_address`,`fdb_status`) VALUES ('88','2320','223078','005056a94437','') [2018/08/20 14:11:56 -0500] poller.php(12451): Failed dbQuery (#1062 - Duplicate entry '88-3004-005056a93130-223078' for key 'dev_vlan_mac_port'), Query: INSERT INTO `vlans_fdb` (`device_id`,`vlan_id`,`port_id`,`mac_address`,`fdb_status`) VALUES ('88','3004','223078','005056a93130','') [2018/08/20 14:11:56 -0500] poller.php(12451): Failed dbQuery (#1062 - Duplicate entry '88-3031-0050565b341c-223078' for key 'dev_vlan_mac_port'), Query: INSERT INTO `vlans_fdb` (`device_id`,`vlan_id`,`port_id`,`mac_address`,`fdb_status`) VALUES ('88','3031','223078','0050565b341c','') It continues to quickly grow and log entries all for different devices/mac addresses/vlans. Anyone else run into this recently? Here is version info (I updated today to make sure there wasn’t a recent fix): [cid:image001.png@01D438B2.CD1274E0]

1 0

OID for Stulz WIB 8000
by Marco Froehlich 20 Aug '18

20 Aug '18

Hello! I am looking for the OID descriptions for a Stulz WIB 8000. Does anyone already have this? *Marco*

1 1

Dependencies
by Luca Sasdelli 20 Aug '18

20 Aug '18

Hi all, maybe this is a FAQ, but still I can’t find a way to avoid seeing ALL customer devices down, from the outside, if the firewall only is down. I think that it would suffice to define a rule to mask a device status behind a “master” one. Best Luca

2 2

Re: [Observium] observium Digest, Vol 97, Issue 12
by Balaji-NOC Engineer 17 Aug '18

17 Aug '18

Dear Team, Please guide me how to add mini graphs in the front page. So,kindly guide me in WEB and also in CLI. Thanks & Regards…. K.Balaji NOC-Engineer Corporate Address: No:38/11 | Status Quo | 4th floor | Sterling Road | Nungambakkam | PH. 9940570099 |Chennai-600034 | 044 61556666 | Mail: noc_team(a)ficustelecom.in | Web: http://www.ficustelecom.com Note:: For further any services related issue, Kindly reach us on 044 61556666 / 9677055555 or noc_team(a)ficustelecom.in / noc(a)ficustelecom.com From: "observium-request" <observium-request(a)observium.org> To: "observium" <observium(a)observium.org> Sent: Friday, August 17, 2018 4:30:02 PM Subject: observium Digest, Vol 97, Issue 12 Send observium mailing list submissions to observium(a)observium.org To subscribe or unsubscribe via the World Wide Web, visit http://postman.memetic.org/cgi-bin/mailman/listinfo/observium or, via email, send a message with subject or body 'help' to observium-request(a)observium.org You can reach the person managing the list at observium-owner(a)observium.org When replying, please edit your Subject line so it is more specific than "Re: Contents of observium digest..." Today's Topics: 1. Re: Training/certification in Observium (Adam Armstrong) 2. Re: Training/certification in Observium (Thomas Steffensen) 3. How do I create a Memory filter using entity type (Moshe Yazdi) 4. Re: Training/certification in Observium (Klimek, Denis) 5. Re: Training/certification in Observium (Tomasz Karczewski) 6. Re: How do I create a Memory filter using entity type (Adam Armstrong) ---------------------------------------------------------------------- Message: 1 Date: Thu, 16 Aug 2018 13:47:28 +0100 From: "Adam Armstrong" <adama(a)memetic.org> To: "" <observium(a)observium.org> Subject: Re: [Observium] Training/certification in Observium Message-ID: <18626553-3d9c-4310-9b94-72d77e0ed866(a)getmailbird.com> Content-Type: text/plain; charset="utf-8" Hi, There isn't really such a thing. What sort of stuff are you having trouble understanding? Thanks, adam. On 2018-08-16 08:32:33, Thomas Steffensen <thomass(a)parknet.dk> wrote: Hi, Does anyone know of online training/certification in Observium besides the youtube tutorials? Med venligst hilsen, Thomas Steffensen Network Administrator Parknet | Esromgade 15, opgang 1, 5. sal | 2200 København N | Phone +45 3690 6000 Mobil +45 4265 0504 | www.parknet.dk [http://www.parknet.dk/] -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://postman.memetic.org/pipermail/observium/attachments/20180816/f922654…> ------------------------------ Message: 2 Date: Thu, 16 Aug 2018 12:53:55 +0000 From: Thomas Steffensen <thomass(a)parknet.dk> To: Observium <observium(a)observium.org> Subject: Re: [Observium] Training/certification in Observium Message-ID: <304c63d9bff44304a508ed0b5a5985a8(a)EXCH01.parknet.local> Content-Type: text/plain; charset="utf-8" Well… To make a long story short the person who set Observium up and was managing it is no longer at the company I am working for and I want to monitor some devices but I am not getting all the information I want. I want to monitor a Juniper MX204 router and I am getting some stats but I keep seeing: Device not yet discovered I am getting usage, logs and alerts but I want to see if I can pull BGP neighborship information. I am running version 16.10.8128 but I do not know if an upgrade to 17.9.8859 is the answer as at this point I am more afraid of breaking things. Basically I would like a breakdown of all functionalities. Med venligst hilsen, Thomas Steffensen Network Administrator Parknet | Esromgade 15, opgang 1, 5. sal | 2200 København N | Phone +45 3690 6000 Mobil +45 4265 0504 | www.parknet.dk<http://www.parknet.dk/> From: observium <observium-bounces(a)observium.org> On Behalf Of Adam Armstrong Sent: Thursday, August 16, 2018 2:47 PM To: observium(a)observium.org Subject: Re: [Observium] Training/certification in Observium Hi, There isn't really such a thing. What sort of stuff are you having trouble understanding? Thanks, adam. On 2018-08-16 08:32:33, Thomas Steffensen <thomass(a)parknet.dk<mailto:thomass@parknet.dk>> wrote: Hi, Does anyone know of online training/certification in Observium besides the youtube tutorials? Med venligst hilsen, Thomas Steffensen Network Administrator Parknet | Esromgade 15, opgang 1, 5. sal | 2200 København N | Phone +45 3690 6000 Mobil +45 4265 0504 | www.parknet.dk<http://www.parknet.dk/> -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://postman.memetic.org/pipermail/observium/attachments/20180816/91ed3ee…> ------------------------------ Message: 3 Date: Thu, 16 Aug 2018 16:03:29 +0300 From: Moshe Yazdi <moshe(a)istraresearch.com> To: observium(a)observium.org Subject: [Observium] How do I create a Memory filter using entity type Message-ID: <CAK=puYadJfdhgGJM+ZK1sf4=vhiTCMnhOkZj1pfg8F31OD1HUQ(a)mail.gmail.com> Content-Type: text/plain; charset="utf-8" Hey, I have a memory alert configured in observium, *mempool_perc greater 90* with * as an entity filter [image: image.png] I get the same threshold memory monitor for all memory entities I'd like to filter memory alerts by entities [image: image.png] Can you please provide a syntax example on how to create a filter for "Virtual memory" so i can set a different threshold for it How can I find these myself next time? Thanks, - Moshe -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://postman.memetic.org/pipermail/observium/attachments/20180816/0bca124…> -------------- next part -------------- A non-text attachment was scrubbed... Name: image.png Type: image/png Size: 28443 bytes Desc: not available URL: <http://postman.memetic.org/pipermail/observium/attachments/20180816/0bca124…> -------------- next part -------------- A non-text attachment was scrubbed... Name: image.png Type: image/png Size: 23862 bytes Desc: not available URL: <http://postman.memetic.org/pipermail/observium/attachments/20180816/0bca124…> ------------------------------ Message: 4 Date: Thu, 16 Aug 2018 13:48:41 +0000 From: "Klimek, Denis" <DKlimek(a)Stadtwerke-Norderstedt.de> To: 'Observium' <observium(a)observium.org> Subject: Re: [Observium] Training/certification in Observium Message-ID: <d7adbf087fca4ebe801c98c1213a00db(a)Donald.Stadtwerke.Norderstedt> Content-Type: text/plain; charset="utf-8" Hi, before upgrading anything I would suggest you doing a full backup of the machine OR that’s the advantage of Observium: Do a backup of the /opt/observium directory and their contents. Then you can upgrade it and in case of troubles you can simple restore the data from backup (directory or full backup of the system). So you will only loose data that got collected between upgrade process and restore process. PS: share your knowledge across all employees ☺ Mit freundlichem Gruß Stadtwerke Norderstedt Denis Klimek Professional Network Engineer IP-Systemtechnik Tel: 040 / 521 04 – 1049 Mobil: 0151 / 652 219 06 dklimek(a)stadtwerke-norderstedt.de<mailto:dklimek@stadtwerke-norderstedt.de> www.stadtwerke-norderstedt.de<http://www.stadtwerke-norderstedt.de/> Von: observium [mailto:observium-bounces@observium.org] Im Auftrag von Thomas Steffensen Gesendet: Donnerstag, 16. August 2018 14:54 An: Observium Betreff: Re: [Observium] Training/certification in Observium Well… To make a long story short the person who set Observium up and was managing it is no longer at the company I am working for and I want to monitor some devices but I am not getting all the information I want. I want to monitor a Juniper MX204 router and I am getting some stats but I keep seeing: Device not yet discovered I am getting usage, logs and alerts but I want to see if I can pull BGP neighborship information. I am running version 16.10.8128 but I do not know if an upgrade to 17.9.8859 is the answer as at this point I am more afraid of breaking things. Basically I would like a breakdown of all functionalities. Med venligst hilsen, Thomas Steffensen Network Administrator Parknet | Esromgade 15, opgang 1, 5. sal | 2200 København N | Phone +45 3690 6000 Mobil +45 4265 0504 | www.parknet.dk<http://www.parknet.dk/> From: observium <observium-bounces(a)observium.org> On Behalf Of Adam Armstrong Sent: Thursday, August 16, 2018 2:47 PM To: observium(a)observium.org Subject: Re: [Observium] Training/certification in Observium Hi, There isn't really such a thing. What sort of stuff are you having trouble understanding? Thanks, adam. On 2018-08-16 08:32:33, Thomas Steffensen <thomass(a)parknet.dk<mailto:thomass@parknet.dk>> wrote: Hi, Does anyone know of online training/certification in Observium besides the youtube tutorials? Med venligst hilsen, Thomas Steffensen Network Administrator Parknet | Esromgade 15, opgang 1, 5. sal | 2200 København N | Phone +45 3690 6000 Mobil +45 4265 0504 | www.parknet.dk<http://www.parknet.dk/> -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://postman.memetic.org/pipermail/observium/attachments/20180816/53284f1…> ------------------------------ Message: 5 Date: Thu, 16 Aug 2018 15:42:22 +0200 From: "Tomasz Karczewski" <tkarczewski(a)man.olsztyn.pl> To: "'Observium'" <observium(a)observium.org> Subject: Re: [Observium] Training/certification in Observium Message-ID: <019e01d43566$f81132c0$e8339840$(a)man.olsztyn.pl> Content-Type: text/plain; charset="utf-8" 1. Check your cron if you have „/usr/bin/php /opt/observium/discovery.php -h all >> /dev/null 2>&1” if not add it to crontab (once a day for all hosts is ok). 2. Check your cron if you have „/usr/bin/php /opt/observium/discovery.php -h new >> /dev/null 2>&1” if not add it to crontab (5 minute interval is ok). 3. You can manualy do discovery using „/usr/bin/php /opt/observium/discovery.php -h your_host” anytime Tomasz Karczewski Administrator Sieci tkarczewski(a)man.olsztyn.pl http://www.man.olsztyn.pl http://www.uwm.edu.pl tel. (89) 523 45 55 fax. (89) 523 43 47 Ośrodek Eksploatacji i Zarządzania Miejską Siecią Komputerową OLMAN w Olsztynie Uniwersytet Warmińsko-Mazurski w Olsztynie From: Thomas Steffensen <thomass(a)parknet.dk> Sent: Thursday, August 16, 2018 2:54 PM To: Observium <observium(a)observium.org> Subject: Re: [Observium] Training/certification in Observium Well… To make a long story short the person who set Observium up and was managing it is no longer at the company I am working for and I want to monitor some devices but I am not getting all the information I want. I want to monitor a Juniper MX204 router and I am getting some stats but I keep seeing: Device not yet discovered I am getting usage, logs and alerts but I want to see if I can pull BGP neighborship information. I am running version 16.10.8128 but I do not know if an upgrade to 17.9.8859 is the answer as at this point I am more afraid of breaking things. Basically I would like a breakdown of all functionalities. Med venligst hilsen, Thomas Steffensen Network Administrator Parknet | Esromgade 15, opgang 1, 5. sal | 2200 København N | Phone +45 3690 6000 Mobil +45 4265 0504 | www.parknet.dk <http://www.parknet.dk/> From: observium <observium-bounces(a)observium.org <mailto:observium-bounces@observium.org> > On Behalf Of Adam Armstrong Sent: Thursday, August 16, 2018 2:47 PM To: observium(a)observium.org <mailto:observium@observium.org> Subject: Re: [Observium] Training/certification in Observium Hi, There isn't really such a thing. What sort of stuff are you having trouble understanding? Thanks, adam. On 2018-08-16 08:32:33, Thomas Steffensen <thomass(a)parknet.dk <mailto:thomass@parknet.dk> > wrote: Hi, Does anyone know of online training/certification in Observium besides the youtube tutorials? Med venligst hilsen, Thomas Steffensen Network Administrator Parknet | Esromgade 15, opgang 1, 5. sal | 2200 København N | Phone +45 3690 6000 Mobil +45 4265 0504 | www.parknet.dk <http://www.parknet.dk/> -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://postman.memetic.org/pipermail/observium/attachments/20180816/f41a59b…> -------------- next part -------------- A non-text attachment was scrubbed... Name: image001.jpg Type: image/jpeg Size: 2142 bytes Desc: not available URL: <http://postman.memetic.org/pipermail/observium/attachments/20180816/f41a59b…> -------------- next part -------------- A non-text attachment was scrubbed... Name: smime.p7s Type: application/pkcs7-signature Size: 4277 bytes Desc: not available URL: <http://postman.memetic.org/pipermail/observium/attachments/20180816/f41a59b…> ------------------------------ Message: 6 Date: Thu, 16 Aug 2018 15:42:14 +0100 From: "Adam Armstrong" <adama(a)memetic.org> To: "" <observium(a)observium.org> Subject: Re: [Observium] How do I create a Memory filter using entity type Message-ID: <6ca23e3e-4f5b-440f-b691-2a254e1ff1df(a)getmailbird.com> Content-Type: text/plain; charset="utf-8" Hi, http://docs.observium.org/entities/#memory You want mempool_descr Thanks, adam. On 2018-08-16 14:04:10, Moshe Yazdi <moshe(a)istraresearch.com> wrote: Hey, I have a memory alert configured in observium, mempool_perc greater 90 with * as an entity filter [image.png] I get the same threshold memory monitor for all memory entities I'd like to filter memory alerts by entities [image.png] Can you please provide a syntax example on how to create a filter for "Virtual memory" so i can set a different threshold for it How can I find these myself next time? Thanks, - Moshe _______________________________________________ observium mailing list observium(a)observium.org http://postman.memetic.org/cgi-bin/mailman/listinfo/observium -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://postman.memetic.org/pipermail/observium/attachments/20180816/00915fa…> ------------------------------ Subject: Digest Footer _______________________________________________ observium mailing list observium(a)observium.org http://postman.memetic.org/cgi-bin/mailman/listinfo/observium ------------------------------ End of observium Digest, Vol 97, Issue 12 *****************************************

1 0

How do I create a Memory filter using entity type
by Moshe Yazdi 16 Aug '18

16 Aug '18

Hey, I have a memory alert configured in observium, *mempool_perc greater 90* with * as an entity filter [image: image.png] I get the same threshold memory monitor for all memory entities I'd like to filter memory alerts by entities [image: image.png] Can you please provide a syntax example on how to create a filter for "Virtual memory" so i can set a different threshold for it How can I find these myself next time? Thanks, - Moshe

2 1

Training/certification in Observium
by Thomas Steffensen 16 Aug '18

16 Aug '18

Hi, Does anyone know of online training/certification in Observium besides the youtube tutorials? Med venligst hilsen, Thomas Steffensen Network Administrator Parknet | Esromgade 15, opgang 1, 5. sal | 2200 København N | Phone +45 3690 6000 Mobil +45 4265 0504 | www.parknet.dk<http://www.parknet.dk/>

4 4

I am not able to login in web interface after new install observium CE 17.9.0
by Cesar Vazquez Moreno 15 Aug '18

15 Aug '18

Hello, After install observium Community Edition 17.9.0 in Centos 7 and Nginx, I am not able to login for first time using web interface. The adduser script added correctly the admin user (also I created 3 more users) with level 10. The weird is there is not record of the action in any log. I did research and found similar issue about 5 years ago where the problem was the disk or partition was full, this is not my case, my / filesystem is 47% and /temp filesystem is 2%. other possibility is the session_start() can have troubles to write, but without log it's only a guess. I want to try set session_save_path() just before session_start() to see if this solve the issue. if you think my idea can work, in what file where should I put the variable? What do you think? any other idea? -- Regards Zague

2 2

Email notification
by Philippe Hurtubise 15 Aug '18

15 Aug '18

Hi, After upgrading to latest version, email notification stopped working. Thanks Philippe Hurtubise

2 5

Slow page generation when using group permissions
by Christian Eriksson 13 Aug '18

13 Aug '18

Hi, When using user level 1 permission with group permission, page generation is very slow. I have a total of 447 devices, where group X has 225 members When a user with permission to group X logs in, the frontpage takes 24s to load(using status_summary/map/syslog/eventlog/). Clicking on a device takes 22s. When an admin logs in, the "same" frontpage takes 0.6s to load Anyone got any tips? Fast userspace caching might work but I just wondered if there is something else to it Observium 18.8.9366 (10th August 2018) OS Linux 4.4.0-130-generic [amd64] (Ubuntu 16.04) Apache 2.4.18 (Ubuntu) PHP 7.0.30-0ubuntu0.16.04.1 (OPcache: ENABLED) Python 2.7.12 MySQL 5.7.23-0ubuntu0.16.04.1 (extension: mysqli 5.0.12-dev) SNMP NET-SNMP 5.7.3 RRDtool 1.5.5 (rrdcached 1.5.5: unix:/var/run/rrdcached.sock) Fping 3.13 (IPv4 and IPv6) Regards Christian

2 1

Re: [Observium] observium Digest, Vol 97, Issue 9
by Ricardo Franco Cantero 13 Aug '18

13 Aug '18

Yes that's correct. We would like to have one entry in Observium with multiple devices connected below. Is that possible? Kind regards, Ricardo Franco Cantero TSP Bombeeck Group BV -----Oorspronkelijk bericht----- Van: observium <observium-bounces(a)observium.org> Namens observium-request(a)observium.org Verzonden: maandag 13 augustus 2018 13:00 Aan: observium(a)observium.org Onderwerp: observium Digest, Vol 97, Issue 9 Send observium mailing list submissions to observium(a)observium.org To subscribe or unsubscribe via the World Wide Web, visit http://postman.memetic.org/cgi-bin/mailman/listinfo/observium or, via email, send a message with subject or body 'help' to observium-request(a)observium.org You can reach the person managing the list at observium-owner(a)observium.org When replying, please edit your Subject line so it is more specific than "Re: Contents of observium digest..." Today's Topics: 1. Multiple devices, one IP (Ricardo Franco Cantero) 2. Re: Multiple devices, one IP (Markus Klock) ---------------------------------------------------------------------- Message: 1 Date: Mon, 13 Aug 2018 07:27:26 +0000 From: Ricardo Franco Cantero <r.francocantero(a)tsp-bombeeck.nl> To: "observium(a)observium.org" <observium(a)observium.org> Subject: [Observium] Multiple devices, one IP Message-ID: <VI1P190MB02566D0ABACA1A07A4E5FAE5AD390(a)VI1P190MB0256.EURP190.PROD.OUTLOOK.COM> Content-Type: text/plain; charset="utf-8" Hi, We monitor connections (modems) and we want to begin monitoring also devices behind these modems. I know we can add them through port mapping since they're running on the same IP but then our Observium will be filled with green dots. We would like to group them by IP. Is there an option for this? Kind regards, Ricardo Franco -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://postman.memetic.org/pipermail/observium/attachments/20180813/f3d08e8…> ------------------------------ Message: 2 Date: Mon, 13 Aug 2018 10:19:52 +0200 From: Markus Klock <markus(a)best-practice.se> To: Observium <observium(a)observium.org> Subject: Re: [Observium] Multiple devices, one IP Message-ID: <CAF6uZmKBF_Su7qbi+fTToafgoWphpD48-MAvxnKqt+mQc5WNKA(a)mail.gmail.com> Content-Type: text/plain; charset="utf-8" Hi, I do not understand, what do you mean Observium will be filled with green dots? are you talking about the map on the frontpage? /Markus 2018-08-13 9:27 GMT+02:00 Ricardo Franco Cantero < r.francocantero(a)tsp-bombeeck.nl>: > Hi, > > > > We monitor connections (modems) and we want to begin monitoring also > devices behind these modems. > > I know we can add them through port mapping since they’re running on > the same IP but then our Observium will be filled with green dots. We > would like to group them by IP. Is there an option for this? > > > > Kind regards, > > > > Ricardo Franco > > _______________________________________________ > observium mailing list > observium(a)observium.org > http://postman.memetic.org/cgi-bin/mailman/listinfo/observium > > -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://postman.memetic.org/pipermail/observium/attachments/20180813/c319423…> ------------------------------ Subject: Digest Footer _______________________________________________ observium mailing list observium(a)observium.org http://postman.memetic.org/cgi-bin/mailman/listinfo/observium ------------------------------ End of observium Digest, Vol 97, Issue 9 ****************************************

2 1

Multiple devices, one IP
by Ricardo Franco Cantero 13 Aug '18

13 Aug '18

Hi, We monitor connections (modems) and we want to begin monitoring also devices behind these modems. I know we can add them through port mapping since they're running on the same IP but then our Observium will be filled with green dots. We would like to group them by IP. Is there an option for this? Kind regards, Ricardo Franco

2 1

reply to
by Arnoldo Vidal Bravo 09 Aug '18

09 Aug '18

hi, we have configured emails on plain text to sendit like SMS (ISP converts emails into SMS) arrives like root(a)localhost.localdomain. where we change this? pd: emails html works fine -- Saluda cordialmente

2 1

how to remove update notification from the web pages
by Jan Horacek 08 Aug '18

08 Aug '18

Hi guys, I just probably don`t see the option, but I would like ask you to help me remove the notification about the new version from observium pages. It`s showing me the box with new version update on pages and I can`t find the way how to remove it. could anybody help please? Thanks Jan

3 6

Zoom in, city level
by Ricardo Franco Cantero 07 Aug '18

07 Aug '18

Hi, Is there an option create a zoomed in 'home page' where you can set a specific size of the map? For example, we have our entire county now displaying on the homepage on the map but we would like to see a city only so that we can display this city onto a separate monitor of us. Kind regards, Ricardo Franco Cantero

2 1

FortiSwitch Ports Query
by Matthew Goeres 06 Aug '18

06 Aug '18

Hi, I recently upgraded from one of the turnkey appliances to Observium running in a VM on its own running Observium CE 17.9.0. Since that upgrade my queries for ports haven't been completed against my main FortiSwitch. Looking at the poller times the ports module seems to be taking the longest (ports/1,562.4587s/156.25%). Debugging that on the fortiswitch I am seeing the following queries and very high CPU usage on the FortiSwitch (124D running 3.6.6). Is there a way to disable that query specifically rather than ports as a whole? snmpd: <msg> 49 bytes xxxxx:8089 -> xxxxx/xxxxx:161 (itf 32.32) snmpd: checking if community "xxxxx" is valid snmpd: checking against community "xxxxx" snmpd: request 1(root)/32/xxxxx == comm 1/0/0.0.0.0/0.0.0.0 snmpd: matched community "xxxxx" snmpd: get-next: OID: 1.3.6.1.2.1.17.7.1.4.3.1 : dot1qVlanStaticEntry .4.1964 -> (snmpd: get_last_index_dot1qVlanStaticTable() snmpd: get_dot1qVlanStaticEntry() fld:4 ) -> 0 snmpd: </msg> 1 snmpd: <msg> 49 bytes xxxxx:17885 -> xxxxx/xxxxx:161 (itf 32.32) snmpd: checking if community "xxxxx" is valid snmpd: checking against community "xxxxx" snmpd: request 1(root)/32/xxxxx == comm 1/0/0.0.0.0/0.0.0.0 snmpd: matched community "xxxxx" snmpd: get-next: OID: 1.3.6.1.2.1.17.7.1.4.3.1 : dot1qVlanStaticEntry .4.859 -> (snmpd: get_last_index_dot1qVlanStaticTable() snmpd: get_dot1qVlanStaticEntry() fld:4 d) -> 0 snmpd: </msg> 1 Thanks, Matt

2 2

Re: [Observium] devices' storage does not show up correctly
by Adam Armstrong 06 Aug '18

06 Aug '18

Hi, In general when using RHEL you have to become proficient at finding lots of non-ancient packages. There are a few places with 5.7.x net-snmp packages for RHEL6, for example: http://rpm.pbone.net/index.php3/stat/4/idpl/23454973/dir/redhat_el_6/com/ne… Note that this is not really our area though, and the development team specifically do not use RHEL/CentOS because they're a nightmare to maintain (ironnically, many people choose them because they think they're easy to maintain, hah!). adam. ------ Original Message ------ From: "Tal Mazor" <tal.mazor(a)radcom.com> To: "observium(a)observium.org" <observium(a)observium.org> Sent: 2018-08-05 14:54:29 Subject: [Observium] devices' storage does not show up correctly >Hi guys, > >I’m getting alerts for high disk usage for some of my servers. > >The alerts are false as my actual partition disk size is 9.6T and total >disk size is 9.9T. > > > > > > > > > >In the Observium.org FAQ I can see the this issue is known for volumes > >16TB, but looks like it’s the same from 10TB. > >I’m running Net-SNMP 5.5 on Centos 6.9 and I was trying to find a later >release but couldn’t. is 5.7 supported only on Centos 7? > > > > > > >Thanks! > > > > >

1 0

devices' storage does not show up correctly
by Tal Mazor 05 Aug '18

05 Aug '18

Hi guys, I'm getting alerts for high disk usage for some of my servers. The alerts are false as my actual partition disk size is 9.6T and total disk size is 9.9T. [cid:image002.jpg@01D42CDC.F7960BA0] [cid:image001.png@01D419E5.810487F0] In the Observium.org FAQ I can see the this issue is known for volumes >16TB, but looks like it's the same from 10TB. I'm running Net-SNMP 5.5 on Centos 6.9 and I was trying to find a later release but couldn't. is 5.7 supported only on Centos 7? [cid:image004.png@01D419E6.3963EED0] Thanks!

1 0

FW: APACHE crashes
by Aus Net Servers Australia Pty Ltd 05 Aug '18

05 Aug '18

Hey Guys, we are having an issue with a missing file in our observium installation. We upgraded from the free version to the paid version but the file does not seem to be there. Can anyone answer this question? [Sun Jul 22 00:48:45.334543 2018] [:error] [pid 3430] [client 10.15.101.240:45176] script '/opt/observium/html/api.php' $ [Follow us] [Facebook] <https://www.facebook.com/ANSASERVERS> [Twitter] <http://twitter.com/#!/ANSASERVERS> [Google+] <https://plus.google.com/101907839864050850442/> The information transmitted in this e-mail is for the exclusive use of the intended addressee and may contain confidential and/or privileged material. Any review, re-transmission, dissemination or other use of it, or the taking of any action in reliance upon this information by persons and/or entities other than the intended recipient is prohibited. If you received this in error, please inform the sender and/or addressee immediately and delete the material. If you have been sent this email and it is not addressed to you please forward the email as is to hostmaster(a)ausnetservers.net.au and delete all local and inta-local copies including backups from your system. E-mails may not be secure, may contain computer viruses and may be corrupted in transmission. Please carefully check this e-mail (and any attachment) accordingly. No warranties are given and no liability is accepted for any loss or damage caused by such matters. This email has been scanned before transmission with business grade antivirus and antispam software but as mentioned above no warranties can be given that the email has not been contaminated after transmission.

2 1

Is building groups broken? Can't get it to work.
by Henrik Cednert (Filmlance) 03 Aug '18

03 Aug '18

Hello Running 18.8.9360 (3rd August 2018). Noticed that “groups” have gotten a sweet ass looking upgrade! =))) Nice one! But I have issues when building the groups. Thought it had to do with the “,” and “|” as separator, since that seems to have changed under the hood. So I tried to recreate an old rule and make the new one just like the old one. But when building it i end up at a blank page with the "Building groups memberships” heading. Nothing happens and when I refresh the page no sensors are in the group. Am I missing something? Picture of the old working group and the new one I made. What did I do wrong? [cid:6BC76FC6-6363-4298-A519-392F95B7C800] Old working rule. “|” as separator of hostnames under “association ruleset” but “,” once you enter the edit mode. Is this expeted behaviour? [cid:7E5BC9FB-7903-4C44-9913-9EAAE8A360C9] Cheers and thanks -- Henrik Cednert / + 46 704 71 89 54 / CTO / Filmlance Disclaimer, the hideous bs disclaimer at the bottom is forced, sorry. ¯\_(ツ)_/¯ Disclaimer The information contained in this communication from the sender is confidential. It is intended solely for use by the recipient and others authorized to receive it. If you are not the recipient, you are hereby notified that any disclosure, copying, distribution or taking action in relation of the contents of this information is strictly prohibited and may be unlawful.

2 7

multiple pollers and poller-wrapper history
by Christian Eriksson 03 Aug '18

03 Aug '18

Hi, Is it possible to see graphs under /pollerlog/view=wrapper/ for each poller when using poller-wrapper with -g option? All pollers are polling their indivudal host group and putting the rrd's over rrdcached, but as of now the filename is the same, so either they will overwrite the files depending of the rrdcached settings, or nothing will happen if file exists ERROR: rrdcached: RRD Error: creating '/opt/observium/rrd/poller-wrapper.rrd': File exists ERROR: rrdcached: RRD Error: creating '/opt/observium/rrd/poller-wrapper_count.rrd': File exists Regards Christian

2 1

OBS-2744: wrapper broke :(
by Stef Renders 03 Aug '18

03 Aug '18

Mike Please fix ☹ /opt/observium/observium-wrapper poller Traceback (most recent call last): File "/opt/observium/observium-wrapper", line 285, in <module> remote_rrd = false NameError: name 'false' is not defined Kind regards

1 0

rrdcached
by Christian Eriksson 02 Aug '18

02 Aug '18

Hi guys, Hope someone here can shed some light on my issue with rrdcached and observium. I am using a distributed setup with web/sql/poller on separate machines. Followed the guide here http://blog.best-practice.se/2017/10/scaling-observium-horizontally.html and currently using two pollers with great success overall What I can't seem to figure out is why some rrd files won't get created. It doesn't matter what poller I am using or what devices, it is always the following rrd-files ping.rrd ping_snmp.rrd status.rrd [cid:image002.png@01D42A5F.99A20960] [cid:image005.png@01D42A5F.99A20960] Some information regarding my system Observium 18.7.9354 (30th July 2018) OS Linux 4.4.0-130-generic [amd64] (Ubuntu 16.04) Apache 2.4.18 (Ubuntu) PHP 7.0.30-0ubuntu0.16.04.1 (OPcache: ENABLED) Python 2.7.12 MySQL 5.7.23-0ubuntu0.16.04.1 (extension: mysqli 5.0.12-dev) SNMP NET-SNMP 5.7.3 RRDtool 1.5.5 (rrdcached 1.5.5: unix:/var/run/rrdcached.sock) Fping 3.13 (IPv4 and IPv6) rrdcached settings $config['rrdcached'] = 'ip address'; $config['rrd']['no_local'] = TRUE; root@server:/home/user# ps aux | grep rrdcached observi+ 13596 1.6 0.5 1727784 45980 ? Ssl Aug01 15:07 /usr/bin/rrdcached -B, -F, -O, -R -L -w 1800 -z 1800 -t 8 -b /opt/observium/rrd/ -j /var/lib/rrdcached/journal/ -G www-data -U observium -p /var/run/rrdcached.pid -s www-data -m 0660 -l unix:/var/run/rrdcached.sock rrdcached journal file show no trace of the files Syslog errors on rrdcached server Aug 2 13:01:01 server rrdcached[13596]: handle_request_update: stat (/opt/observium/rrd/device1.net.ad.handels.se/status.rrd) failed. Aug 2 13:01:01 server rrdcached[13596]: handle_request_update: stat (/opt/observium/rrd/device1.net.ad.handels.se/ping.rrd) failed. Aug 2 13:01:01 server rrdcached[13596]: handle_request_update: stat (/opt/observium/rrd/device2/status.rrd) failed. Aug 2 13:01:01 server rrdcached[13596]: handle_request_update: stat (/opt/observium/rrd/device1.net.ad.handels.se/ping_snmp.rrd) failed. Aug 2 13:01:01 server rrdcached[13596]: handle_request_update: stat (/opt/observium/rrd/device2/ping.rrd) failed. Aug 2 13:01:01 server rrdcached[13596]: handle_request_update: stat (/opt/observium/rrd/device2/ping_snmp.rrd) failed. Aug 2 13:01:01 server rrdcached[13596]: handle_request_update: stat (/opt/observium/rrd/device3/status.rrd) failed. Aug 2 13:01:01 server rrdcached[13596]: handle_request_update: stat (/opt/observium/rrd/device3/ping.rrd) failed. Aug 2 13:01:01 server rrdcached[13596]: handle_request_update: stat (/opt/observium/rrd/device3/ping_snmp.rrd) failed. I can manually create a rrd file from the poller with success rrdtool create device/status.rrd --daemon ip-address RRA:AVERAGE:0.5:1:2016 DS:status:GAUGE:600:-20000:U Best regards Christian Eriksson

3 5

Performance issue with a Cisco C6807-XL
by Richard Kuhns 02 Aug '18

02 Aug '18

1 1

Re: [Observium] ifAlias Description notmatches multiple wildcard issue
by Adam Armstrong 31 Jul '18

31 Jul '18

Use attributes as attributes. You probably don't want to create permanent alert table entries just for this, and it's not time critical. Using attributes to match these non-valid descriptions, an alert table entry would only be created when it's necessary, and then you can just use an unrealistic metric condition to make it always trigger. adam. ------ Original Message ------ From: "Klimek, Denis" <DKlimek(a)Stadtwerke-Norderstedt.de> To: "'observium(a)observium.org'" <observium(a)observium.org> Sent: 2018-07-26 15:01:55 Subject: [Observium] ifAlias Description notmatches multiple wildcard issue >Hi all, > > > >I would like to setup a alert checker which checks configured Ethernet >ports if there is a “valid” Observium port description configured. I >tried it with following conditions “ifAlias notmatches >*:*[*Gbit]*{*}*(*)*:*:” but it’s reporting any port as “OK”. The “::” >got added by us for internal purposes. > > > >B: POP102-TBA [20Gbit] {} () ::-> get’s reported as “OK” which is >correct > >CERRZ2R_C_X670-> get’s reported also as “OK” but this is wrong > > > >Attached a screenshot of the complete rule set. > > > >Any ideas are welcome how to solve this J > > > >Mit freundlichem Gruß > >Stadtwerke Norderstedt > > > >Denis Klimek > > > >Professional Network Engineer > >IP-Systemtechnik > > > >Tel: 040 / 521 04 – 1049 > >Mobil: 0151 / 652 219 06 > > > >dklimek(a)stadtwerke-norderstedt.de > >www.stadtwerke-norderstedt.de > > >

3 2

Re: [Observium] ifAlias Description notmatches multiple wildcard issue
by Adam Armstrong 31 Jul '18

31 Jul '18

You are trying to use attributes as metrics, don't do that. adam. ------ Original Message ------ From: "Klimek, Denis" <DKlimek(a)Stadtwerke-Norderstedt.de> To: "'Observium'" <observium(a)observium.org> Sent: 2018-07-31 15:21:15 Subject: Re: [Observium] ifAlias Description notmatches multiple wildcard issue >Hi, > >would it be possible to add ifAlias too or the feature to support other >type of category description aswell to fill the port_descr_type, >port_descr_descr and the other ports_descr_* fields >We are using some custom types additional to "Core, Peering, >Server".... to separate those links better. > >Mit freundlichem Gruß >Stadtwerke Norderstedt > >Denis Klimek > >Professional Network Engineer >IP-Systemtechnik > >Tel: 040 / 521 04 – 1049 >Mobil: 0151 / 652 219 06 > >dklimek(a)stadtwerke-norderstedt.de >www.stadtwerke-norderstedt.de > >-----Ursprüngliche Nachricht----- >Von: observium [mailto:observium-bounces@observium.org] Im Auftrag von >Adam Armstrong >Gesendet: Freitag, 27. Juli 2018 14:04 >An: Observium >Betreff: Re: [Observium] ifAlias Description notmatches multiple >wildcard issue > >ifAlias can't (currently) be used as an alerting metric. > >we could add it, but its perhaps better to just use the attribute in >the >association. > >adam. > >On 2018-07-26 08:01, Klimek, Denis wrote: >>Hi all, >> >>I would like to setup a alert checker which checks configured Ethernet >>ports if there is a "valid" Observium port description configured. I >>tried it with following conditions "ifAlias notmatches >>*:*[*Gbit]*{*}*(*)*:*:" but it's reporting any port as "OK". The "::" >>got added by us for internal purposes. >> >>B: POP102-TBA [20Gbit] {} () ::-> get's reported as "OK" which is >>correct >> >>CERRZ2R_C_X670-> get's reported also as "OK" but this is wrong >> >>Attached a screenshot of the complete rule set. >> >>Any ideas are welcome how to solve this J >> >>Mit freundlichem Gruß >> >>Stadtwerke Norderstedt >> >>DENIS KLIMEK >> >>Professional Network Engineer >> >>IP-Systemtechnik >> >>Tel: 040 / 521 04 - 1049 >> >>Mobil: 0151 / 652 219 06 >> >>dklimek(a)stadtwerke-norderstedt.de >> >>www.stadtwerke-norderstedt.de [1] >> >> >> >>Links: >>------ >>[1] http://www.stadtwerke-norderstedt.de/ >>_______________________________________________ >>observium mailing list >>observium(a)observium.org >>http://postman.memetic.org/cgi-bin/mailman/listinfo/observium >_______________________________________________ >observium mailing list >observium(a)observium.org >http://postman.memetic.org/cgi-bin/mailman/listinfo/observium >_______________________________________________ >observium mailing list >observium(a)observium.org >http://postman.memetic.org/cgi-bin/mailman/listinfo/observium

3 3

ifAlias Description notmatches multiple wildcard issue
by Klimek, Denis 31 Jul '18

31 Jul '18

Hi all, I would like to setup a alert checker which checks configured Ethernet ports if there is a "valid" Observium port description configured. I tried it with following conditions "ifAlias notmatches *:*[*Gbit]*{*}*(*)*:*:" but it's reporting any port as "OK". The "::" got added by us for internal purposes. B: POP102-TBA [20Gbit] {} () ::-> get's reported as "OK" which is correct CERRZ2R_C_X670-> get's reported also as "OK" but this is wrong Attached a screenshot of the complete rule set. Any ideas are welcome how to solve this :) Mit freundlichem Gruß Stadtwerke Norderstedt Denis Klimek Professional Network Engineer IP-Systemtechnik Tel: 040 / 521 04 - 1049 Mobil: 0151 / 652 219 06 dklimek(a)stadtwerke-norderstedt.de<mailto:dklimek@stadtwerke-norderstedt.de> www.stadtwerke-norderstedt.de<http://www.stadtwerke-norderstedt.de/>

2 2

Re: [Observium] VLANs and fdb-table on Cisco devices
by Mike Stupalov 30 Jul '18

30 Jul '18

http://docs.observium.org/faq/#all-my-hosts-seem-down-to-observium-snmp-doe… > todevnull(a)free.fr <mailto:todevnull@free.fr> > 28 July 2018 at 13:42 > Hi, > > Please find it in attached file. > With this debug on vlans module, i think there is my error : > > STDERR[ > add_mibdir: strings scanned in from > /var/www/observium/mibs/cisco/.index are too large. count = 703 > MIB search path: > /var/www/observium/mibs/rfc:/var/www/observium/mibs/net-snmp:/var/www/observium/mibs/cisco > Cannot find module (CISCO-VTP-MIB): At line 0 in (none) > vtpVersion.0: Unknown Object Identifier (Sub-id not found: (top) -> > vtpVersion) > ] > SNMP STATUS[FALSE] > SNMP ERROR[#997 - Wrong .index in mibs dir] > > > Don't really know how to solve this.... > > Thanks in advance for your help. > > Rds, > > Tarik. > > > 28 juillet 2018 07:51 "Mike Stupalov" <mike(a)stupalov.ru > <mailto:%22Mike%20Stupalov%22%20%3Cmike@stupalov.ru%3E>> a écrit: > > > Mike Stupalov <mailto:mike@stupalov.ru> > 28 July 2018 at 08:51 > Hi, > > please attach debug for discovery: > > ./discovery.php -d -m ports,vlans -h <device> > > -- Mike Stupalov Observium Limited, http://observium.org

2 1

Re: [Observium] Port groups unusable in alerts checks ?
by Thibault Richard 30 Jul '18

30 Jul '18

No feedback on this one ? De : Thibault Richard <thibs(a)thibs.com> Envoyé : mercredi 25 juillet 2018 15:50 À : 'observium(a)observium.org' <observium(a)observium.org> Objet : Port groups unusable in alerts checks ? Hello, Ive defined several port groups as you can see below : 1° First question I would like to add a condition equivalent to ifOperStatus equals up but this kind of condition doesnt exist in the pre-defined list. Am I missing something ? 2° Second question I would like to use this group in an Alert Checks but in the entity association ruleset, I can use a Device Group but not a Port Group No « Port Group » and if I try to use Device Group I see only groups related to devices Bug of misunderstanding from me ? Best Regards Thibault

1 0