- observium - lists.observium.org

Best practice for "Port Down"?
by Eric W. Bates 12 Jul '18

12 Jul '18

I quite like the idea that Observium notes "down" ports; however, in my case, most are false-positive in that they belong to users who power down after hours. Our normal port description for an unallocated port is "NXC" (No Xross Connect) to the "Ignore Ports by ifName/ifDescr" and that has helped. In a perfect world, I want to monitor all ports which interconnect between our switches, and all ports in the Data Center; but ignore everything else. Can I put a negated RegExp in "Ignore ports by ifAlias Regular Expression" instead? Thank you. -- Clark 159a, MS 46 508/289-3112

3 2

Re: [Observium] Syslog issue
by Mike Stupalov 11 Jul '18

11 Jul '18

Hi, read this section: http://docs.observium.org/syslog/#match-syslog-hostnameip-with-device You have troubles with association between observium devices hostname and rsyslog received hosts. You must set preserve FQDN or just use associate by IP (as written in docs). > Satish Patel <mailto:satish.txt@gmail.com> > 11 July 2018 at 17:44 > I want to integrate syslog with my observium and i am following all > these steps http://docs.observium.org/syslog/ > > I am using rsyslog, I have point my Cisco gears to observium and i can > see in tcpdump logs are coming from cisco routers, now issue is i > can't see them in GUI interface, how do i troubleshoot now? > _______________________________________________ > observium mailing list > observium(a)observium.org > http://postman.memetic.org/cgi-bin/mailman/listinfo/observium -- Mike Stupalov Observium Limited, http://observium.org

1 0

Problem with time range showing graph
by Fiberwide Sysadmins 11 Jul '18

11 Jul '18

Hi all, i'm using Observium in our company, we start suffering a problem when we try to show a graph in a defined time frame, the result is like that the time frame selected and the graph are different time frame, for example I select From: 2018-07-10 09:03:5 To: 2018-07-10 10:11:56 but the graph show starting 11:00 ending 12:10 like the attached image, and if I try to select a time-frame ending in this moment, the graph is empty, i suppose because the real time-frame used will end in the future. What I've missed in my configuration ? Distinti saluti --- Davide Lima Daum - System & Network Engineer Fibering S.p.a. - www.fiberwide.com T: +39.02.00632100 F: +39.02.00632199 e: sysadmin(a)fiberwide.com

2 2

Syslog issue
by Satish Patel 11 Jul '18

11 Jul '18

I want to integrate syslog with my observium and i am following all these steps http://docs.observium.org/syslog/ I am using rsyslog, I have point my Cisco gears to observium and i can see in tcpdump logs are coming from cisco routers, now issue is i can't see them in GUI interface, how do i troubleshoot now?

1 0

No Alert Notification
by David Ross 11 Jul '18

11 Jul '18

I'm attempting to setup an alert notification that would get engaged only if SNMP and ICMP were down, so I've setup a device-down alert that is based upon the below two conditions. device_status_type snmp 0 device_status_type ping 0 I also have "Require all conditions" selected within the Alert Checker Conditions. When SNMP condition is met, Observium does mark the device as down and does not send a notification, as desired. However, when both conditions are met, Observium marks the device as down but does not send a notification. What am I missing? Regards, *David W. Ross, Sr.* Sr. Network Engineer 50 Fremont St, 42nd Floor San Francisco, California 94105 415.589.4930 - O 415.926.3483 - C david.ross(a)salesforce.com <http://smart.salesforce.com/sig/david.ross//us_mb/default/link.html>

1 0

how to exclude the CPU temperature readings when monitoring virtual machines?
by Thomas Stather 10 Jul '18

10 Jul '18

Hi I am using Observium Professional 18.1.9011 (subscription). I am monitoring one virtual machine (Ubuntu, VMWare ESXi hosted) and noticed that the CPU temperatur is quite high with 100 degrees :) The question is now how to exclude this output for all virtual machines if possible? Thanks in advance! Best, Thomas -- Thomas Stather IT Services VCP4, VCP6-DCV Tel: +49 6221-486 628 Fax: +49 6221-486 561 ------------------------------------------------------------------------ Max Planck Institute for Medical Research (MPImF) Jahnstrasse 29, 69120 Heidelberg Germany

2 3

Is the snmp output from Aruba devices total rubbish or is something upfucked in my install.
by Rowlands Mark 10 Jul '18

10 Jul '18

Observium 8.6.9263 (10th June 2018) OS Linux 4.4.0-116-generic [amd64] (Ubuntu 16.04) Apache 2.4.18 (Ubuntu) PHP 7.0.30-0ubuntu0.16.04.1 (OPcache: ENABLED) Python 2.7.12 MySQL 10.1.25-MariaDB-1~xenial (extension: mysqli 5.0.12-dev) SNMP NET-SNMP 5.7.3 RRDtool 1.5.5 (rrdcached 1.5.5: unix:/var/run/rrdcached.sock) Fping 3.13 (IPv4 and IPv6) I have a bunch of Aruba devices, WAP205H, IAP155, 303H and a single 7005. OS little varied but usually 6.4x or 6.5x. I am aware that the Aruba is not specifically supported but would expect basic snmp bandwidth info to be correct ( ish ) IAP155 and 7005 seem to report bandwidth traffic ok but the 205and 303 report nonsense. ( see the attached graph ) . Are there other Aruba users out there with similar issues or is it just me?

3 3

Best practice for alert threshold per devices
by Thibault Richard 09 Jul '18

09 Jul '18

%Hello, Im trying to define different alert threshold per devices. Ive tried by proceeding like this : 1° Ive defined a global alarm for all my devices having disk over 90% Im associating this alert checks to every devices except those in a specific group 2° The group with id 17, correspond to devices for which I accept a disk filled under 95% 3° Ive defined a second alert check specifically for this Is it the good way to achieve my goal ? Is my syntax correct ? Best Regards Thibault

2 1

access graph, and alerts using API
by Gupta, Vijay(AWF) 09 Jul '18

09 Jul '18

Hi Team, Using API, I was trying to retrieve below information but could not figure out from the documentation provided. * graph (for processor, memory, etc) * device alerts for a specific time period (say past week/month) * we can pull the alerts, but not for a specific time range Appreciate if you could please help. Best, Vijay

1 0

RHEL 7 and php 7.0 loading
by Dash Brousseau 06 Jul '18

06 Jul '18

I have a new os install for subscription of Observium on redhat 7 I can’t get the main page to work Website loads but it’s all texts. Trying with php 7.0.But there seems to be conflict between php 5.3 or difference between httpd24. I dont know In the error logs it doesn’t show anything wrong so I’m assuming its php problem In the browser I get this display all in text “* @copyright (C) 2006-2013 Adam Armstrong, (C) 2013-2016 Observium Limited * */ include("../includes/sql-config.inc.php"); include_once($config['html_dir'] . "/includes/functions.inc.php"); // Preflight checks if (!is_dir($config['rrd_dir'])) { print_error("RRD Directory is missing ({$config['rrd_dir']}). Graphing may fail."); } if (!is_dir($config['log_dir'])) { print_error("Log Directory is missing ({$config['log_dir']}). Logging may fail."); } if (!is_dir($config['temp_dir'])) { print_error("Temp Directory is missing ({$config['temp_dir']}). Graphing may fail."); } if (!is_writable($config['temp_dir'])) { print_error("Temp Directory is not writable ({$config['tmp_dir']}). Graphing may fail."); } if (ini_get('register_globals')) { $notifications[] = array('text' => 'The PHP Option "register_globals" enabled in the php.ini. Please disable it!', 'severity' => 'alert'); } //if (!function_exists('hash_exists')) //{ // $alerts[] = array('text' => 'The PHP `hash` module is missing This will cause editing and other forms to fail. Please install it.', 'severity' => 'danger'); //} if (version_compare(PHP_VERSION, OBS_MIN_PHP_VERSION, '<')) { $notifications[] = array('text' => ' Your PHP version is too old. Your currently installed PHP version ' . PHP_VERSION . ' is older than the required minimum of ' . OBS_MIN_PHP_VERSION . '. Please upgrade your version of PHP to prevent possible incompatibilities and security problems.', 'severity' => 'danger'); } if (isset($config['alerts']['suppress']) && $config['alerts']['suppress']) { $notifications[] = array('text' => ' All Alert Notifications Suppressed” etc etc. But I follow the install guide at Observium website I even create a ticket with redhat I was directly here https://access.redhat.com/solutions/2662201 When I use httpd24-httpd to start apache,he doesn’t even reference /etc/httpd/conf.d/ where obersvium is. So observirum page doesn’t even load however the main apache site shows working php7.0 I will kill that and go back to this systemctl enable httpd systemctl start httpd And now I’m back at the same situation. When Observium loads just text Anyone got Observium to work on rheal 7 with php 7.0 Dash This message contains information which may be confidential and privileged. Unless you are the intended addressee (or authorized to receive for the intended addressee), you may not use, copy or disclose to anyone the message or any information contained in the message. If you have received the message in error, please advise the sender by e-mail then delete the message immediately. Francais: http://www.fundserv.com/fr/company/disclaimer<http://www.fundserv.com/francais/legal/disclaimer_email_ib.shtml>

3 3

how to avoid false-positives (device down/up), on HPE switches and Aruba APs
by Thomas Stather 06 Jul '18

06 Jul '18

Hi Observium: 18.1.9011 (stable, subscribtion) We are monitoring our networking infrastructure with Observium and for a long time, i am seeing some false-positives. The poller period is 5 minutes and i.e. on 10:00am Observium reports a switch beeing down, where at 10:05am it reports it as beeing up again. This happens to HPE network gear (switches) as well as to wireless APs (Aruba). I set |$config['ping']['debug'] = TRUE; ||$config['ping']['timeout'] = 500; ||| |in config.php and will now monitor if that helps. Is there anything else i can try to solve this issue?| Best, Thomas -- Thomas Stather IT Services VCP4, VCP6-DCV Tel: +49 6221-486 628 Fax: +49 6221-486 561 ------------------------------------------------------------------------ Max Planck Institute for Medical Research (MPImF) Jahnstrasse 29, 69120 Heidelberg Germany

3 2

SQL Query
by Andrew Lemin 06 Jul '18

06 Jul '18

Hi Adam, Hope you are well. Just a quick question about the Observium database schema. I need to write a simple query that will return a list of device names and the IP addresses which Observium uses for its polling (we don’t need or want any other addresses). I had a look and found tables ‘devices’ and ‘ipv4_addresses’. And I can see the device_id foreign key etc, so obtaining all the IPs for a device is trivial enough. But I am not sure how to best filter for just the IP which Observium uses for polling. I recently built a DNS zone for our network team using PowerDNS, and I just need to export all the devices and their management IPs from Observium, so I can inject the records into PowerDNS. So nothing fancy, but we have a couple hundred records.. Kind regards, Andy Lemin

2 1

Re: [Observium] Observium Graph issue
by Balaji-NOC Engineer 06 Jul '18

06 Jul '18

Dear Team, After adding 400 devices in our observium pro version we are getting drops in our graph. Kindly help us to resolve this issue. Thanks & Regards…. K.Balaji NOC-Engineer Corporate Address: No:38/11 | Status Quo | 4th floor | Sterling Road | Nungambakkam | PH. 9940570099 |Chennai-600034 | 044 61556666 | Mail: noc_team(a)ficustelecom.in | Web: http://www.ficustelecom.com Note:: For further any services related issue, Kindly reach us on 044 61556666 /9677055555 or noc_team(a)ficustelecom.in /noc(a)ficustelecom.com

2 1

Re: [Observium] SQL Query
by Mike Stupalov 06 Jul '18

06 Jul '18

Hi, devices polling not use tables with *_addresses, only hostnames. Hostnames resolve IP during polling by DNS query (or system hosts file). > Andrew Lemin <mailto:AndrewL@4d-dc.com> > 6 July 2018 at 12:36 > > Hi Adam, > > Hope you are well. > > Just a quick question about the Observium database schema. > > I need to write a simple query that will return a list of device names > and the IP addresses which Observium uses for its polling (we don’t > need or want any other addresses). > > I had a look and found tables ‘devices’ and ‘ipv4_addresses’. > > And I can see the device_id foreign key etc, so obtaining /all/ the > IPs for a device is trivial enough. But I am not sure how to best > filter for just the IP which Observium uses for polling. > > I recently built a DNS zone for our network team using PowerDNS, and I > just need to export all the devices and their management IPs from > Observium, so I can inject the records into PowerDNS. So nothing > fancy, but we have a couple hundred records.. > > Kind regards, Andy Lemin > > > > _______________________________________________ > observium mailing list > observium(a)observium.org > http://postman.memetic.org/cgi-bin/mailman/listinfo/observium -- Mike Stupalov Observium Limited, http://observium.org

2 1

Using professional edition license for testing
by Erdem HAKI 06 Jul '18

06 Jul '18

Hello, I want to migrate Observium professional edition to a new server, my plan is to install everything and testing them on the new box before moving data(rrd, database etc.). I saw "The subscription license is valid for a single production installation and two testing or development installations." on the page so I want to make sure that how should I handle license operation. I only can see one user/pass for my subscription when I logged in. Can I use it on the new box to download another Observium professional edition and test my build before moving data while my production Observium is still operational? Best

2 1

Possibility to disable/enable syslog view for user
by Klimek, Denis 04 Jul '18

04 Jul '18

Hi, what would you think about adding another permission level to disable/enable the possibility to view the syslog entries of a device? We have the situation that some external users must have access to specific devices and graphs, but this also includes syslog entries... and we simply do not want to show them this log entries i.e. cli commands that have been executed. Mit freundlichem Gruß Stadtwerke Norderstedt Denis Klimek Professional Network Engineer IP-Systemtechnik Tel: 040 / 521 04 - 1049 Mobil: 0151 / 652 219 06 dklimek(a)stadtwerke-norderstedt.de<mailto:dklimek@stadtwerke-norderstedt.de> www.stadtwerke-norderstedt.de<http://www.stadtwerke-norderstedt.de/>

1 0

average trend line to the aggregate storage graphs
by Richard Wigzell 04 Jul '18

04 Jul '18

Hi, is it possible to add an average trend line to the aggregate storage graphs? Similar to what is on the standard usage Graph. We are looking for a way to do some simple and rough storage growth prediction for an number of volumes as an aggregate. If this is something we could do natively with Observium that would be great but if anyone has done something similar with the RRDs and can share that would also be good. [cid:image001.png@01D41347.5FD8B370] [cid:image002.png@01D41347.C1A5EEB0] Regards [cid:image001.jpg@01CE9215.D39244B0]<https://www.it.ox.ac.uk/> Richard Wigzell Technical Lead, Storage Platforms IT Services | University of Oxford 13 Banbury Road, Oxford OX2 6NN T: 01865 616282 www.it.ox.ac.uk<https://www.it.ox.ac.uk/>

1 0

Cisco ADSL port only shows one speed
by Tim Bates 03 Jul '18

03 Jul '18

Hello experts.... I have 2 Cisco routers with ADSL ports. Observium is showing the low (outbound) speed on these ports, however I am more interested in the higher (inbound) speed. When we have line problems, the outbound speed generally doesn't change much (maybe by a few kbps), but the inbound can drop from ~7mbps to under 1mbps. This drastic inbound speed change is what I'd like to monitor, graph and get alerts on... Is there a way to get the other speed to show instead (or in addition)? I can see the Cisco ADSL MIB listed, and enabled, but this is obviously not enough. I can't see any other obvious settings, and Google was not my friend on this one. TB

2 2

Graphs for Juniper SRX Showing incorrect speed spike
by TAN Lists 03 Jul '18

03 Jul '18

Hey All, I have a weird issue with some interface graphs for a SRX240H where it will show the speed spiking to 10+GB/s on a 1GB/s port and for the life of me, I can't figure out why. https://pasteboard.co/Hss2xMm.png Observium I think is polling the 32 bit OIDs, but the webUI says it is 64bit Polling with Cacti shows correct traffic on both 32 and 64 bit OIDs - https://pasteboard.co/Hss2agw.png I also see a similar issue with a SRX110H where the VDSL interface (which is hard capped to 12MB/s) is showing 50+MB/s which is not possible. https://pasteboard.co/Hss2kcf.png Not sure how else to debug this, I have a feeling that this might be an issue within Observium, but advice appreciated. Devices are: Juniper SRX240H JunOS 12.1X46-D72.2 (Internet Router) Juniper SRX110H2-VA JunOS 12.3X48-D55.4 (Internet Router) Version Information *Observium CE* 17.9.0 (25th September 2017) *OS* Linux 3.10.0-862.3.2.el7.x86_64 [amd64] (CentOS 7) *Apache* 2.4.6 (CentOS) OpenSSL/1.0.2k-fips mod_fcgid/2.3.9 PHP/5.6.36 *PHP* 5.6.36 *Python* 2.7.5 *MySQL* 5.5.56-MariaDB (extension: mysqli 5.5.56-MariaDB) *SNMP* NET-SNMP 5.7.2 *RRDtool* 1.6.0 Thoughts on fixing / troubleshooting appreciated Have tried deleting devices and re-adding, beyond that, not sure what else to do.

2 2

Re: [Observium] Cisco ADSL port only shows one speed
by ron＠rjr-services.com 02 Jul '18

02 Jul '18

1 0

9304 issues
by Joey Stanford 01 Jul '18

01 Jul '18

Hi, Overnight the update script brought us to 9304 and the schema up to 378. Immediately after, all of our devices when down and alerts went out. The problem was that the poller script SQL call was failing because it was looking for status = 1 and all of our boxes were in status = 0. poller couldn’t find the host even though the hostname matched hostname in devices. I did an “ update devices set status=1 where `disabled`=0; “ and poller started again but I’m sure something else it at play here. Joey

3 12

Alert-check "down device" doesn't report devices down
by Thibault Richard 30 Jun '18

30 Jun '18

Hello I've something strange with a basic alert checker I've defined a basic alert-checker to check if my devices are down The test condition is device_status equals 0 I know it works because I already had some working case. I'm astonished because I have a case with devices shown as down : . but not reported by the alarm-checks The device is a Dell EqualLogic PS4210 Do you know what my mistake could be ? Best Regards Thibault

2 3

Moving Data to new build
by Barry George 29 Jun '18

29 Jun '18

How/Can you move data (graphs, device information etc) from one Observium build to another new build? I have been evaluating a Turnkey Linux CE build of Observium adding some devices etc. We like it and have purchased a license for the PE edition. I've been having little success moving the Virtualbox hosted version to ESXi 6.x for production. So I was thinking of installing a new build ontop of Debian 9. Can I move our Vbox hosted data over or do I just suck it up and start again? Thanks, Barry

3 3

group and alert
by Arnoldo Vidal Bravo 28 Jun '18

28 Jun '18

hi, how i can create an alert based on a group? (associate group-alert) is possible? or i do an alert and a group ? -- Saluda cordialmente

1 0

Disabling arp-table discovery module
by Klimek, Denis 28 Jun '18

28 Jun '18

Hi all, I would like to globally disable the arp-table discovery module. I already tried $config['poller_modules']['arp-table'] = FALSE; in config, but this is for the "poller modules" and not discovery modules. In the global discovery module web gui section there is no option for it. Mit freundlichem Gruß Stadtwerke Norderstedt Denis Klimek Professional Network Engineer IP-Systemtechnik Tel: 040 / 521 04 - 1049 Mobil: 0151 / 652 219 06 dklimek(a)stadtwerke-norderstedt.de<mailto:dklimek@stadtwerke-norderstedt.de> www.stadtwerke-norderstedt.de<http://www.stadtwerke-norderstedt.de/>

1 0

SNMP + Ping Alerting
by David Ross 25 Jun '18

25 Jun '18

Hello! I would like to setup an alert-checker that would send a notification only if a device is not reachable via both SNMP and ICMP. Is there documentation that explains specifically how to do this? Thanks! *David W. Ross, Sr.* Sr. Network Engineer 50 Fremont St, 42nd Floor San Francisco, California 94105 415.589.4930 - O 415.926.3483 - C david.ross(a)salesforce.com <http://smart.salesforce.com/sig/david.ross//us_mb/default/link.html>

3 3

Minor issue with data obtained vs displayed.
by Ron Marosko 25 Jun '18

25 Jun '18

Howdy Adam et al., Just a minor issue that I've noticed. I'm doing WMI polling of my Windoze boxen, and it's generally working well. The information is getting fetched properly, and being displayed properly. However, I've got a few instances where I see the wmi component of the poller is fetching information properly (case in point my personal workstation): ##### Module Start: wmi ##### WMI Poller: Windows version updated: 10 Pro Insider Preview (10.0.17692) Intel(R) Xeon(R) CPU X5680 @ 3.33GHz o Module time 5.3163s But when I view the device overview page, I get the normal non-WMI indication of "Unknown Processor Type". Pointers on where to look? SQL db? Thanks, Ron -- Ron Marosko, Jr. . . . . . . . . . . . . . . . . . . . . . . . . . . CCIE No. 4526 (R/S), NN5DX Senior Network Engineer RJR Services, Inc. 1108 West Dickinson Blvd, Suite A Fort Stockton, TX 79735 USA o: +1 432 336 5600 x115 c: +1 432 290 6344 e: <mailto:ron@rjr-services.com> ron(a)rjr-services.com pgp pubkey: <http://pgp.mit.edu:11371/pks/lookup?op=get&search=0x778B3B0258AB8B5C> 0x58AB8B5C "To know me is to fly with me." -- This message has been scanned by E.F.A. Project and is believed to be clean.

1 0

Alerting on Bandwidth
by Joey Stanford 24 Jun '18

24 Jun '18

Hi Gang, I’m hoping someone can point me to the best answer for this… I can’t use network weathermap on my Observium server. I do need to monitoring available bandwidth on ports. Many ports on many of the 100 routers have different available bandwidths (e.g. our shot from one mountain to another might have a 100M ifspeed but due to the 30 mile link the actual throughput is 15M). I have some ideas: 1) use alerts to specify the router and port which is cumbersome (using ifInOctets_rate and ifOutOctets_rate) 2) query SQL directly and write a program to parse and display 3) Something I haven’t tested, just use the generic rule I have written and modify the ifspeed on the appropriate ports to what the actual bandwidth is. Any suggestions? Thanks, Joey

2 1

Re: [Observium] mikrotik bgp monitor
by Mike Stupalov 24 Jun '18

24 Jun '18

Hi, you should address this question to Mikrotik.. My answer is - when here will be BGP4-MIB in list: https://wiki.mikrotik.com/wiki/Manual:SNMP#Management_information_base_.28M… > Farshid Abediny <mailto:farshidabediny@gmail.com> > 24 June 2018 at 08:02 > Hello, > i want know when does observium want support mikrotik bgp session > monitoring ? > we have lot mikrotik routers and we need to monitor bgp session with > observium > thank you. > _______________________________________________ > observium mailing list > observium(a)observium.org > http://postman.memetic.org/cgi-bin/mailman/listinfo/observium -- Mike Stupalov Observium Limited, http://observium.org

1 0

mikrotik bgp monitor
by Farshid Abediny 24 Jun '18

24 Jun '18

Hello, i want know when does observium want support mikrotik bgp session monitoring ? we have lot mikrotik routers and we need to monitor bgp session with observium thank you.

1 0

function not found
by Arnoldo Vidal Bravo 22 Jun '18

22 Jun '18

Hi, I'm searching a MAC address on FDB Tables, but i can't view more results (like pages) -- Saluda cordialmente

1 0

APC PDU values
by Pedrosi, Derek G. 21 Jun '18

21 Jun '18

Not sure when this started (2 weeks ago?), but my APC PDUs (model AP8641) are alerting sensors on several banks. I checked the output values on the PDU and they are correctly reported BOTH on the PDU and in Observium. The issue lies at what Observium thinks the thresholds should be set to. On the PDU the thresholds are correct (16 warn and 20 max). But Observium is reporting the thresholds as 1.6 and 2 [cid:image001.png@01D40879.39B4EB10] Doing a discovery debug on the device I see this... [cid:image003.jpg@01D40879.D14D5C00] I feel that the SCALE value is being wrongly applied to several of the values, namely: rPDU2BankStatusCurrent.1 rPDU2BankStatusCurrent.2 rPDU2BankStatusCurrent.3 rPDU2BankStatusCurrent.4 rPDU2PhaseStatusCurrent.1 rPDU2PhaseStatusCurrent.2 Regards, derek

2 5

Unable to create Device type alert checkers
by Neal, Christopher 20 Jun '18

20 Jun '18

Hello, We are suddenly unable to create new alert checkers for the device type in our observium instance. When the checker is created and we rebuild no machines are associated to the alert checker. We have a previous device up/down alert checker in place that still works but we are unable to add new devices to it. Other checkers such as storage can be created and seem to work fine. Any help would be appreciated. Best, Chris

1 0

Cisco ASA IPSEC tunnels
by Christian Eriksson 20 Jun '18

20 Jun '18

Hi, Is it possible to have alerting for IPSEC tunnels? Could not find any entities for it Regards Christian

2 1

Poller
by Arnoldo Vidal Bravo 20 Jun '18

20 Jun '18

Hi. How i can do poller manualy to a device from web? or an entire location

2 1

Python Version Upgrade
by Mike Hyslop 20 Jun '18

20 Jun '18

Hi All. Are there any negative effects of upgrading python 2.7 to 3.5 from an observium viewpoint, I can see it's in use with the poller-wrapper.py Thanks in advance Mike.

2 1

WSL FTW
by Rob VanHooren 20 Jun '18

20 Jun '18

well how about that. obs runs within the ubuntu of WSL. wouldn’t recommend anything full-blown on it, but perhaps good for demos and the like. me@win10pc:~$ uname -a Linux win10pc 4.4.0-17134-Microsoft #112-Microsoft Thu Jun 07 22:57:00 PST 2018 x86_64 x86_64 x86_64 GNU/Linux (ref. url https://s15.postimg.cc/kzduf9lij/Screen_Shot_2018-06-19_at_20.40.11.png )

1 0

/opt/observium/mibs/DO NOT MODIFY THE CONTENTS OF THIS DIRECTORY breaks my AIDE config
by Hamilton, Kent 14 Jun '18

14 Jun '18

Any chance we could get this changed to "DO_NOT_MODIFY_THE_CONTENTS_OF_THIS_DIRECTORY" instead? It breaks our Ubuntu AIDE config and I haven't found a workaround for it not being an AIDE expert. I've tried sed'ing it out in the Debian auto-configlet (/etc/aide/aide.conf.d/31_aide_observium) but that ends up breaking more things. -- [exegy-wrb-121x52] S. Kent Hamilton Senior Systems Administrator 349 Marshall Ave,. Suite 100 St. Louis, MO 63119 US Phone: +1 314-218-3558 Mobile: +1 636-634-1549 Email: KHamilton(a)Exegy.COM ________________________________ This e-mail and any documents accompanying it may contain legally privileged and/or confidential information belonging to Exegy, Inc. Such information may be protected from disclosure by law. The information is intended for use by only the addressee. If you are not the intended recipient, you are hereby notified that any disclosure or use of the information is strictly prohibited. If you have received this e-mail in error, please immediately contact the sender by e-mail or phone regarding instructions for return or destruction and do not use or disclose the content to others.

2 2

Troubleshoot/Debug Geolocation?
by Mailing Lists 14 Jun '18

14 Jun '18

Hi Guys, Is there a way to troubleshoot/debug the geolocation system? I thought we were using Google, and it reports that's what is configured, but it seems like in reality the lookups are using Yahoo? Perhaps the Google query is failing due to an issue with the API key, but how could I check this? I couldn't see anything obvious in the normal poller or discovery debugs for geolocation? Screenshot from a device that makes me thing something isn't working Thanks, Tim C

1 0

Re: [Observium] LDP Neighbors, Syslog rules severity and program matching
by Mike Stupalov 13 Jun '18

13 Jun '18

Hi, currently not possible select syslog alert rules by program and/or severity, but we are working on this ability. > Jason Neighbors <mailto:jneighbors@servpac.com> > 10 May 2018 at 08:38 > Hi, > > We've been running r9073 (2018-03) for a month now and it has turned > out to be a great addition to our environment. > > I was wondering if there are any plans to add support for MPLS LDP > neighbor info in the routing pages? That is something we wouldn't > mind paying a bit for. > > Also, regarding syslog rules, my rules to alert on message matches > work great but I couldn't find mention in the doc examples of matching > on severity or program name. Is it possible? > > Thank you. > > --- > Jason Neighbors > > _______________________________________________ > observium mailing list > observium(a)observium.org > http://postman.memetic.org/cgi-bin/mailman/listinfo/observium -- Mike Stupalov Observium Limited, http://observium.org

2 1

Observium Upgrade process stuck
by Andrey Gorodetzky 13 Jun '18

13 Jun '18

Hello Guys, I'm trying to upgrade (for a second time now) the Observium Community Edition server 14.2 to latest and the progress get stuck on the following for nearly 8 hours now. Followed those instructions: http://docs.observium.org/updating/#upgrade-to-latest-major-release Is there something that can be done here? Should we try to upgrade one version in a time (even if its possible)? Thanks ahead. [image: image.png] *Best Regards,* *Andrey Gorodetzky | TechOps Engineer* *Tel: +972 54 446 5202* *Mail: andrey(a)cloudshare.com <andrey(a)cloudshare.com>* [image: Capture] <http://www.cloudshare.com>

2 1

Group Editor Interface
by Robert Williams 13 Jun '18

13 Jun '18

Hi all, It may have been there for some time (as this is not frequently modified) but I've found that the group membership editor (Devices->Groups) doesn't seem to recognise historic rulesets which we have for some of our groups. Image below: In this example, the group matches servers with specific combinations of Distro and Version. Interestingly, the group actually continues to work just fine! The only issue is that I cannot make any changes to it with the graphical editor. I've had to update it in the DB (specifically changing one of the version numbers) for Debian, and it continues to show the desired results once the group is rebuilt. >From what I can see, the 'device.distro' and 'device.distro_ver' which we are using, are no longer valid items under 'device' in the GUI. Also, I don't "think" that any of the options there are an appropriate equivalent for this (Operating System is different I believe; and there is no numeric 'version' at all). This I presume is why the editor doesn't know how to handle these existing rules. Is this a quick fix, or the entrance to a rabbit hole? Cheers! Robert Williams Custodian Data Centres https://www.CustodianDC.com

2 3

Linux server RRDs-port info after server reboot gets messy
by Edvinas K 12 Jun '18

12 Jun '18

Hello, We started to use Observium for Linux server. So far everything was good, but after reboot of Linux server some ports swaped the data and show incorrect values. Is there any prevention to this ? on the server we're using net-snmp-utils

3 5

LACP Member Monitoring/Speed Mismatch Alert Suggestion
by Klimek, Denis 12 Jun '18

12 Jun '18

Hi all, i would like ask all of you if someone knows a good solution how to trigger a speed mismatch against the configured link speed. I give you an example: Bundle-Ether1 has a port description of "Core: device [40Gbit] {abc} (notes)". So the bundle should have 40Gbit and I want now to create an alert to trigger a speed mismatch if a member goes down, then Bundle-Ether1 will report its updated speed i.e. 30Gbit and this should be compared and trigger somehow. Mit freundlichem Gruß Stadtwerke Norderstedt Denis Klimek Professional Network Engineer IP-Systemtechnik Tel: 040 / 521 04 - 1049 Mobil: 0151 / 652 219 06 dklimek(a)stadtwerke-norderstedt.de<mailto:dklimek@stadtwerke-norderstedt.de> www.stadtwerke-norderstedt.de<http://www.stadtwerke-norderstedt.de/>

3 4

cannot update custom location
by Rowlands Mark 12 Jun '18

12 Jun '18

2 2

Re: [Observium] Cisco Live US
by ron＠rjr-services.com 11 Jun '18

11 Jun '18

1 0

Cisco Live US
by Markus Klock 11 Jun '18

11 Jun '18

Hi guys! Are any of you Observians(?) present at Cisco Live US, Orlando this week? Anyone interested in doing a meetup, maybe talk about how you use Observium, discuss feature whishlist? Or something like that? /Markus

1 0

new version 18.5.9221
by Jacek.Dabrowski＠selgros.pl 10 Jun '18

10 Jun '18

Hello, I updated the observation to version 18.5.9221 (10th May 2018), all works only do not show graphics, what is wrong? [cid:image001.jpg@01D3FF65.417C47C0] Regards, Jacek Dąbrowski

2 8

No pages after loging in
by Roland Hill 10 Jun '18

10 Jun '18

Hi list, Simple problem statement, as per the subject, I get no pages once I log into Observium. More Background. I'm running CE 17.9 edition and have done sucessfully since it's release. I have however update my OS to Ubuntu 18.04 and PHP-7.2. In searching I saw http://jira.observium.org/browse/OBS-2537 and assume my CE issue is a PHP7.2 related one. Is there anyway I can confirm this is a PHP7.2 issue? This is just on my home network (because I can), so nothing urgent and if the fix is "wait until the next release" then I'm good with that. -- Regards, Roland PGP Key 0xDA39319B = BCF0 1214 BAE9 5A3D 46FC 21A6 360D 9398 DA39 319B

4 4

Create a shortcut to a live graph?
by Joe Brouillette 05 Jun '18

05 Jun '18

Hey all, is there a way to create a shortcut to a live graph in Observium? I've used the "Link to Graph" button but that just creates a static picture of what's going on. I'd like to create a web page with graphs for my manager but those graphs need to display live data. Thanks, Joe Brouillette IT Specialist Link Transit 509.664.7643 jobee(a)linktransit.com<mailto:jobee@linktransit.com>

4 7