- observium - lists.observium.org

Oracle E-SBC support
by Johnathon Voegeli 31 May '18

31 May '18

Hey guys, Does anyone here monitor an Oracle (AcmePacket) Session Border controller? I see it’s slightly supported, but does not support the ap-SIP function with SNMP. I am trying to get a custom OID to monitor a sip endpoint at least basic monitoring, but was curious if any one had any luck with anything more? I can manually add each OID for SIP Agent status, but it’s a manual process each time we add a customer/endpoint to each cluster and of course only provides a 1, 2, 3. I have it setup to alert on anything other than 3. Thanks in Advance! ~JV

1 0

ASR1k subinterface
by Mirditor Kuçaj 29 May '18

29 May '18

Hello Does anybody has the issue about incorrect traffic pooling on subinterfaces over portchannel. The device is Cisco ASR1001-X. Earlier with subinterfaces on TE interface it was ok. [root@obs-55 observium]# php poller.php -h 262 --//-- +---------+--------------------+------------------+--------+----------+----- -----+---------+----------+--------+---------+----+ | ifIndex | Label | Type | Speed | BPS In | BPS Out | Data In | Data Out | PPS In | PPS Out | HC | +---------+--------------------+------------------+--------+----------+----- -----+---------+----------+--------+---------+----+ | 15 | Po1 | Virtual/Internal | 20Gbps | 10.7Gbps | 10.5Gbps | 284GB | 279GB | 1.6M | 1.58M | Y | | 16 | Po1.6 | L2 VLAN (802.1Q) | 20Gbps | 3.28kbps | 378bps | 91.3kB | 10.5kB | 2.98 | 43.8m | Y | | 17 | Po1.21 | L2 VLAN (802.1Q) | 20Gbps | 592kbps | 406bps | 16.1MB | 11.3kB | 650 | 0.8 | Y | | 18 | Po1.23 | L2 VLAN (802.1Q) | 20Gbps | 20.8Mbps | 2.19kbps | 565MB | 60.8kB | 15.1k | 4.26 | Y | | 19 | Po1.24 | L2 VLAN (802.1Q) | 20Gbps | 4.77Mbps | 5.23kbps | 129MB | 145kB | 4.26k | 10.1 | Y | | 20 | Po1.25 | L2 VLAN (802.1Q) | 20Gbps | 3.19Mbps | 2.66kbps | 86.7MB | 74kB | 2.45k | 5.2 | Y | | 21 | Po1.27 | L2 VLAN (802.1Q) | 20Gbps | 28Mbps | 4.24kbps | 761MB | 117kB | 8.72k | 8.14 | Y | Thx

2 1

file that controls alarm output
by Mark Carter 29 May '18

29 May '18

Hi, what file controls alarm output? I have alarms going into a "Slack" channel and want to format them so they take up less lines. Currently an Alarm takes up 7 lines. Thank you Arthur

2 1

Cisco 3750 Temperature
by Storer, Darren 29 May '18

29 May '18

Here's an odd one... Temperature is reported correctly by many models of Cisco catalyst devices but on one of the Observium nodes there are two 3750 switches with different behaviour. The 3750 with IOS 15 is okay and reports temperature but an older 3750 under IOS 12 doesn't return temperature, even though I feel sure that it did a few years ago. Observium version: 18.5.9244 (24th May 2018) Has anyone else observed this behaviour? Update: Just checked an old 2960, still on IOS 12 and found that it doesn't display temperature but a 2960 with IOS 15 is okay. Any advice gratefully received. Thanks Darren

1 0

(no subject)
by Ricardo Franco Cantero 29 May '18

29 May '18

Hi, What would be the best way to create an alert on reboot? For example after a power outage? Would that be an alert checker with up_time less than 20 minutes? Or a syslog alert with /rebooted/ ? Kind regards, Ricardo Franco Cantero

3 2

Observium CE 17.9.8859 LDAP authentication issue
by Jean-Francois Allain 29 May '18

29 May '18

Hello everybody, I did an upgrade of Observium recently from version 14.4.5229 to version 17.9.8859 and I have authentication issue with LDAP now. I was wondering if Observium CE 17.9.8859 was compatible with the following version of PHP LDAP module : php7.0-ldap Thanks in advance, -- *Jean-François Allain*

3 7

Exclude device from geolocation
by Christian Eriksson 28 May '18

28 May '18

Hi, Is it possible to exclude a device from being targeted by the geolocation settings? In my case, I am polling a Cisco ASA security context and both physical devices in the HA cluster are on two different locations /Christian

2 1

BGP polling inside VRF
by Jan Horacek 25 May '18

25 May '18

Hi guys, I`m not sure if this question was already answered or not, but I was asked to do research how Observium could monitor BGP peers inside the VRFs to alert us if any peer flaps or is down. I can set up alert notification based on the syslog, but this module is sending emails only and doesn`t show notification on the main dashboard. Do you have any idea if would be possible support snmp-context for every BGP peers in observium? Using SNMPv3 on all routers or how to display alerts on the dashboard based on syslog policy? Thanks Jan

3 4

[Question] Problem Alert Mails
by San Rollheiser 24 May '18

24 May '18

Hi guys, sorry for bother you, but have a question about the email configuration. After the update a few versions back work fine the alerts by email. But now not work, only work my integration with Slack, but i need the email alerts. My configuration is this: config.php // Set up a default alerter (email to a single address) $config['email']['default'] = "alarmas(a)tinitix.com"; $config['email']['from'] = "Alarmas <alarmas@tinitix>"; $config['email']['default_only'] = TRUE; /include/defaults.inc.php // Mailer backend Settings $config['email']['enable'] = TRUE; // Enable/Disable email globally $config['email']['from'] = TRUE; // Mail from. Default: "Observium" <observium@`hostname`> $config['email']['default'] = TRUE; // Default alert recipient $config['email']['default_only'] = FALSE; // Only use default recipient (all alerts send to default recipient) $config['email']['graphs'] = TRUE; // Allow graphs in mail body $config['email']['backend'] = 'smtp'; // Mail backend. Allowed: "mail" (PHP's built-in), "sendmail", "smtp". // sendmail backend specific options $config['email']['sendmail_path'] = '/usr/sbin/sendmail'; // The location of the sendmail program. // smtp backend specific options $config['email']['smtp_host'] = 'my_ip_smtp_server'; // Outgoing SMTP server name. $config['email']['smtp_port'] = '465'; // The port to connect. $config['email']['smtp_timeout'] = '60'; // SMTP connection timeout in seconds. $config['email']['smtp_secure'] = 'ssl'; // Enable encryption. Use 'tls' or 'ssl' $config['email']['smtp_auth'] = TRUE; // Whether or not to use SMTP authentication. $config['email']['smtp_username'] = 'soporte(a)tinitix.com'; // SMTP username. Thx. BR Santiago

2 1

Pulling VTI interface descriptions from a Centos 7 based router
by Ben Maschke 24 May '18

24 May '18

Hi guys, is there a way to pull interface descriptions from a Centos 7 based router? It's based on vti interfaces and the alias parameter: ip link set vti10 up mtu 1400 alias "test name" Observium only pulls the interface IP - and has ignored the description so far Thank you very much in advance -- *Ben Maschke* Senior System Engineer *Shazam* 26-28 Hammersmith Grove, London, W6 7HA Please consider the environment before printing this document Shazam Entertainment Limited is incorporated in England and Wales under company number 3998831 and its registered office is at 26-28 Hammersmith Grove, London W6 7HA.

2 1

Re: [Observium] Location of a switch
by Adam Armstrong 23 May '18

23 May '18

Hi, We expect a street address in the location field (or more specifically a location field that can be parsed by whatever geolocation service is used). You can put coordinates directly into sysLocation inside square brackets like : http://docs.observium.org/config_options/#reverse-geocoding To quickly repoll the basic device data when testing you can do ./poller.php -h <hostname/device_id> -m system adam. ------ Original Message ------ From: "Thomas Peters" <TPeters(a)mcts.org> To: "observium(a)observium.org" <observium(a)observium.org> Sent: 2018-05-22 21:41:48 Subject: [Observium] Location of a switch >I have installed Observium CE on CentOS 7.4 and am trying to get a >handle on the question of location for devices. > > > >I have 7 locations, all within the same city. I put in a default >location in the configuration, by longitude and latitude. Sure enough, >there’s a green checkmark on the map right where my main building is. > > > >For Nagios purposes, we have location codes that consist of the >company, site (may be omitted) building, and room. So you might find >something like mcts-ad-sr (admin building, server room) or >mcts-brg-1flidf (Bridge Street Garage, 1st floor IDF.) So far, I am >using the same arbitrary codes for Observium, in the SNMP “location” on >the switch. > > > >I was hoping to use these sort of codes to precisely locate a switch >for the humans that use Observium, while hoping there was already a >table built into the tool to translate the codes to map coordinates. > > > >I don’t know enough about the SNMP “location” code to understand if I’m >using it correctly. We have always just treated it as a free-text >locator code, usable only by my IT department. > > > >Does Observium expect to see a street address in there? I tried that; >doesn’t seem to work. I don’t have an API key for the geocoding, and it >probably won’t work anyhow, since all these devices have non-routable >10.x.x.x addresses, which geocoding can’t make sense of. > > > >Any help appreciated- > >Thanks. > > > > > > > >Thomas M. Peters | Sr. Systems Administrator | tpeters(a)mcts.org >Desk: 414.343.1720 | Helpdesk: x3400 or helpdesk(a)mcts.org > >Milwaukee County Transit System <http://www.ridemcts.com/> > > > >1942 N 17th Street | Milwaukee, WI 53205 > >Check us out on Facebook <https://www.facebook.com/mcts> & Twitter ><https://twitter.com/RideMCTS> > > >

5 7

Now What? / Most busy ports?
by Thomas Peters 22 May '18

22 May '18

Hello all. Just installed Observium CE on CentOS 7.4 and am tinkering with it. It graphs, it discovers devices via CDP/XDP, it's really cool. Now what do I do with it? I know, I know, I should have had a destination in mind before I took to the road. But the program looked so cool that I installed it just to see what it could do. One question I would really like to have it answer for me is this: I have some period slow-downs on my network. Can I get Observium to show me the busiest ports on a switch, so I can track down the culprit (if it's due to traffic?) I've been prowling the interwebs for my information. That was a helpful method of getting information to install it and make it work, and comb out some of the early bugs, but I'm finding it harder to locate hints on how to rally exploit this excellent resource to make my network better/faster/stronger/able to leap tall packets in a single bound. Thomas M. Peters | Sr. Systems Administrator | tpeters(a)mcts.org<mailto:tpeters@mcts.org> Desk: 414.343.1720 | Helpdesk: x3400 or helpdesk(a)mcts.org<mailto:helpdesk@mcts.org> Milwaukee County Transit System <http://www.ridemcts.com/> 1942 N 17th Street | Milwaukee, WI 53205 Check us out on Facebook<https://www.facebook.com/mcts> & Twitter <https://twitter.com/RideMCTS>

2 3

Location of a switch
by Thomas Peters 22 May '18

22 May '18

I have installed Observium CE on CentOS 7.4 and am trying to get a handle on the question of location for devices. I have 7 locations, all within the same city. I put in a default location in the configuration, by longitude and latitude. Sure enough, there's a green checkmark on the map right where my main building is. For Nagios purposes, we have location codes that consist of the company, site (may be omitted) building, and room. So you might find something like mcts-ad-sr (admin building, server room) or mcts-brg-1flidf (Bridge Street Garage, 1st floor IDF.) So far, I am using the same arbitrary codes for Observium, in the SNMP "location" on the switch. I was hoping to use these sort of codes to precisely locate a switch for the humans that use Observium, while hoping there was already a table built into the tool to translate the codes to map coordinates. I don't know enough about the SNMP "location" code to understand if I'm using it correctly. We have always just treated it as a free-text locator code, usable only by my IT department. Does Observium expect to see a street address in there? I tried that; doesn't seem to work. I don't have an API key for the geocoding, and it probably won't work anyhow, since all these devices have non-routable 10.x.x.x addresses, which geocoding can't make sense of. Any help appreciated- Thanks. Thomas M. Peters | Sr. Systems Administrator | tpeters(a)mcts.org<mailto:tpeters@mcts.org> Desk: 414.343.1720 | Helpdesk: x3400 or helpdesk(a)mcts.org<mailto:helpdesk@mcts.org> Milwaukee County Transit System <http://www.ridemcts.com/> 1942 N 17th Street | Milwaukee, WI 53205 Check us out on Facebook<https://www.facebook.com/mcts> & Twitter <https://twitter.com/RideMCTS>

1 0

Scaling Observium
by Christian Eriksson 22 May '18

22 May '18

Hi, Anyone tried this? Will anything like this ever be officially supported? http://blog.best-practice.se/2017/10/scaling-observium-horizontally.html I rather have a single point of management for all my customers, if possible /Christian

3 4

Re: [Observium] HTTP 500 error (adama@memetic.org)
by Ricardo Franco Cantero 22 May '18

22 May '18

Hi Adam, I turned off UFW firewall on Ubuntu server and updated but still the same result :-( Met vriendelijke groet, Ricardo Franco Cantero TSP Bombeeck Group BV Today's Topics: 1. Re: HTTP 500 error (adama(a)memetic.org) ---------------------------------------------------------------------- Message: 1 Date: Thu, 17 May 2018 19:46:00 +0100 From: <adama(a)memetic.org> To: "'Observium'" <observium(a)observium.org> Subject: Re: [Observium] HTTP 500 error Message-ID: <005901d3ee0f$4da81ea0$e8f85be0$(a)memetic.org> Content-Type: text/plain; charset="utf-8" This is pretty much always caused by an intervening firewall or transparent proxy breaking the HTTP session used by SVN. Adam. From: observium <observium-bounces(a)observium.org> On Behalf Of Ricardo Franco Cantero Sent: 17 May 2018 09:33 To: observium(a)observium.org Subject: [Observium] HTTP 500 error Hi, When updating through putty, with sudo svn update it results into a HTTP 500 error. Any suggestions? Kind regards, Ricardo Franco Cantero

3 2

Avaya Phone 9630G
by todevnull＠free.fr 22 May '18

22 May '18

Dear observium team, Just a quick one please, is the Avaya phone model 9630G is supported please ? I've tried to add the phone, but only classic SNMP stats are graphed and there is an observium icon instead of Avaya logo on the device list. Thanks in advance. Tarik.

1 0

Database service crashes after update
by Brian Weeks 20 May '18

20 May '18

After updating to the latest version 18.5.9221 (stable) I ran the discovery.php -u to update it said (update syslog, may be long operation ~30-45min) after about 5 min I get an error Critical error: (2013) Lost connection to MySQL server during query. Restarting the service nor rebooting the server helps and I had to do a rollback from a checkpoint to get Observium to function again. Can you help me with this error? -- Brian Weeks Network Engineer CCNA, MCSE, ACMT, A+, Network+, Security+ Brenham ISD 1301 Niebuhr St. Brenham, TX 7783 Office: (979) 277-3760 ext. 2249 Email: bweeks(a)brenhamk-12.net Website: http://www.brenhamisd.net

2 1

SRX4200 FAN status missing
by Youssef BENGELLOUN - ZAHR 20 May '18

20 May '18

6 45

Did the revision update and my workstations are down now
by Joe Brouillette 19 May '18

19 May '18

Hey all, I did the revision update and I'm now currently at 18.5.9221. Since I did the update my workstations are all showing as down. I can ping them from my Observium server and I can run an snmpwalk on them from the Observium server. I tried running both ./discovery.php -d -h <some_host> and ./poller.php -d -h <some_host> and both of them have this warning: WARNING: 0 devices polled/discovered. Did you specify a device that does not exist? I tried to re-add a device but Observium says it has already been added. Am I missing something simple here? Thanks, Joe Brouillette IT Specialist 509.664.7643 jobee(a)linktransit.com<mailto:jobee@linktransit.com> [cid:image001.jpg@01D3ECEE.460F8470]

4 6

HTTP 500 error
by Ricardo Franco Cantero 17 May '18

17 May '18

Hi, When updating through putty, with sudo svn update it results into a HTTP 500 error. Any suggestions? Kind regards, Ricardo Franco Cantero

2 1

Obserivum Pro (Rolling 18.5.9220)
by Serghei Golipad 16 May '18

16 May '18

Hi All, Anyone's Weathermap broke recently? Anything you did to fix it? Cheers PLEASE CONSIDER THE ENVIRONMENT BEFORE PRINTING THIS EMAIL. CDW Limited is a Company registered in England and Wales. This email is sent for and on behalf of CDW Finance Holdings Limited. CDW Finance Holdings Limited is the UK holding company for CDW Limited trading as CDW. The registered office for CDW Finance Holdings Limited (Company Number 05872067) and its UK group undertakings is 10 Fleet Place, London, EC4M 7RB. VAT Registration 902 1949 39. Confidentiality: This e-mail contains proprietary information, some or all of which may be confidential and/or legally privileged. It is for the intended recipient only. If an addressing or transmission error has misdirected this e-mail, please notify the author by replying to this e-mail and then delete the original. If you are not the intended recipient you may not use, disclose, distribute, copy, print or rely on any information contained in this e-mail. You must not inform any other person other than CDW or the sender of its existence. For more information about CDW please visit www.uk.cdw.com

4 4

Schedule alerting times
by Reisner Martin 16 May '18

16 May '18

Hi! We are running Observium Professional 18.5.9221 (10th May 2018) and are on the way of using more and more great features of Observium. At the moment we are working on Alerting Rules and they are working great - but... Is there a way to schedule alerting in a way that we have e-mail alerting only turing working hours? Or inverted in a way that we have e-mail alerting between a time-slot for example 00:00 to 06:00 o'clock an 18:00 to 00:00 o'clock? Thank you in advanced! With kind regards Martin

2 1

configuration (alert rules) export
by Edvinas K 15 May '18

15 May '18

Hello, Is't possible to export custom Observium configuration. For example alert rules ?

2 1

AUTO : Absence du bureau du 14 au 25 mai / Out of office from 14 to 25 may. (retour 28/05/2018)
by Olivier.BERTRAND＠galian.fr 15 May '18

15 May '18

Je suis absent(e) du bureau jusqu'au 28/05/2018 Bonjour, Je serais absent du bureau du 14 Mai au 25 Mai compris. Thank you for your e-mail, I will be out of office from 14 May to 25 May and unable to respond at this time. En cas d'urgence, vous pouvez contacter Jean-Luc Ky à cette adresse : Jean-luc.ky(a)galian.fr Should the matter be important, please contact Jean-Luc Ky at Jean-luc.ky(a)galian.fr in my absence. Cordialement, Regards, Remarque : ceci est une réponse automatique à votre message "[Observium] configuration (alert rules) export" envoyé le 15/05/2018 14:17:50. C'est la seule notification que vous recevrez pendant l'absence de cette personne. Olivier BERTRAND Ingénieur Systèmes et Réseaux Olivier.BERTRAND(a)galian.fr Tél: 01 44 95 22 34 || 89 rue La Boétie 75008 Paris || www.galian.fr Description : pictoPensez à l'environnement, n'imprimez ce mail que si vous en avez besoin version 1.0.g1

1 0

Customizing Alert email notification
by Edvinas K 14 May '18

14 May '18

Hello, Is't possible to customize Observium Alert email - that in email subject space i would get an entity description too ? Thanks

2 1

Alert Checkers broken when caching is enabled
by Andrew Lemin 14 May '18

14 May '18

Hi, Not sure if this is special to our setup, but we have found that when we enable caching (with the cache driver set to Auto), the Alert Checkers page stops displaying. We have disabled caching again for now which has restored the Alert Checkers, so it's not a critical issue. But thought we'd share this finding. Thanks, Andy.

1 0

Expanded Eaton UPS Support - xupsEnvironment
by Mailing Lists 11 May '18

11 May '18

Hi, Would it be possible to expand the Eaton UPS monitoring support to include the contact sensors contained within 'xupsEnvironment' so we can alert on the open/closed state of the sensors? The device does appear to provide this information through SNMP (sensor 'type', 'status' and 'name' it's just not captured by Observium as best as I can tell. I can provide SNMP outputs, or possibly access to the device, as required to assist with this request Many Thanks, Tim C

3 3

Upgrading
by Joe Brouillette 11 May '18

11 May '18

Hey all, I can't seem to figure out how to upgrade my Observium to the new revision. I tried svn update but that didn't work. Per the Upgrading the Subscription Edition web page I tried svn update -r 18.5.9221 and when that failed tried svn update -r 9221 but that failed too. I was going to download the new installer but I didn't want to overwrite my current installation. So how do I upgrade my current Observium install? Thanks, Joe Brouillette IT Specialist 509.664.7643 jobee(a)linktransit.com<mailto:jobee@linktransit.com> [cid:image001.jpg@01D3E924.7DD8EFE0]

2 2

blank window
by Raimundas Šlepikas 11 May '18

11 May '18

Hi, i tried on few different PC, blank windows apears randomly. Any ideas please ? -- UAB "Kauno internetos sistemos' R.

4 3

New Iconset
by Klimek, Denis 11 May '18

11 May '18

Hi all, we've just updated this morning to the latest version 18.5.9221 (10th May 2018) and see that the iconset has changed. It looks very strange... ports are now using a Yellow ! Attention, Profil Menue (right top) a temperature icon, BGP Icon is now a paper clip?! Are you sure you want to keep them? They look so mismatched in Observium. Is there any way to get the old iconset back? They looked much much more better than the current one :/ Mit freundlichem Gruß Stadtwerke Norderstedt Denis Klimek Professional Network Engineer IP-Systemtechnik Tel: 040 / 521 04 - 1049 Mobil: 0151 / 652 219 06 dklimek(a)stadtwerke-norderstedt.de<mailto:dklimek@stadtwerke-norderstedt.de> www.stadtwerke-norderstedt.de<http://www.stadtwerke-norderstedt.de/>

4 4

Re: [Observium] New Iconset
by Mike Stupalov 11 May '18

11 May '18

Hi, please refresh page one more time :P > Klimek, Denis <mailto:DKlimek@Stadtwerke-Norderstedt.de> > 11 May 2018 at 09:31 > > Hi all, > > we’ve just updated this morning to the latest version 18.5.9221 (10th > May 2018) and see that the iconset has changed. > > It looks very strange… ports are now using a Yellow ! Attention, > Profil Menue (right top) a temperature icon, BGP Icon is now a paper > clip?! > > Are you sure you want to keep them? They look so mismatched in > Observium. Is there any way to get the old iconset back? They looked > much much more better than the current one :/ > > Mit freundlichem Gruß > > Stadtwerke Norderstedt > > *Denis Klimek* > > Professional Network Engineer > > IP-Systemtechnik > > Tel: 040 / 521 04 – 1049 > > Mobil: 0151 / 652 219 06 > > dklimek(a)stadtwerke-norderstedt.de > <mailto:dklimek@stadtwerke-norderstedt.de> > > www.stadtwerke-norderstedt.de <http://www.stadtwerke-norderstedt.de/> > > > > _______________________________________________ > observium mailing list > observium(a)observium.org > http://postman.memetic.org/cgi-bin/mailman/listinfo/observium -- Mike Stupalov Observium Limited, http://observium.org

1 0

LDP Neighbors, Syslog rules severity and program matching
by Jason Neighbors 10 May '18

10 May '18

Hi, We've been running r9073 (2018-03) for a month now and it has turned out to be a great addition to our environment. I was wondering if there are any plans to add support for MPLS LDP neighbor info in the routing pages? That is something we wouldn't mind paying a bit for. Also, regarding syslog rules, my rules to alert on message matches work great but I couldn't find mention in the doc examples of matching on severity or program name. Is it possible? Thank you. --- Jason Neighbors

2 2

SENAO (Engenius) support for dual band products
by Serge Caron 09 May '18

09 May '18

Greetings! Quote from Adam : "The archives died during a server move, and the mailing list software is voodoo, so they never came back". Apologies for asking something that is probably old news. The Community Edition ships with Senao (Engenius) MIBs dated 2013.11.25. This is fine for older devices such as the EAP9550 and we get proper data (such as number of wireless clients). However, it seems all modern dual band devices such as the (older) EAP600 and the (newer) ECB1750 always report 1 as the number of wireless clients (as well as other broken stats). Are there updated MIBs compatible to observium for these products? Regards, Serge Caron

4 6

Corporate authentication process - questions
by Jan Horacek 08 May '18

08 May '18

Hello gents, I need your advice if anybody of you were integrating Observium to corporate authentication processes? In our company is authentication driven by SAML or oAuth which I don`t see as supported in Observium documentation and need to get help if possible how to integrate Observium to SAML or to oAUTH process. Question is also going to Adam and developers as we are using professional license. I`ll appreciate any hints or guides. Thanks Jan

4 8

exporting info to grafana dashboard
by Edvinas K 08 May '18

08 May '18

Hello, We need to reuse Observium data and to draw a interface traffic graphs in Grafana dashboard. Since Observium doesnt support exportation to Influxdb - is there are any other ways to export to Grafana Board ? Thanks

2 2

[Question] Is possible add MIBs?
by San Rollheiser 07 May '18

07 May '18

Hi, how are you? Only have a one question, on the site of Ubiquiti have a Custom MiBs for AirFiber i possible add this MiBs in Observium? I think this MIB have more addition info about the AirFiber Status. BR Santiago

5 11

Performance issue
by todevnull＠free.fr 05 May '18

05 May '18

Hello all, After a long period of test, i'm putting in production this great software in my company. The server is quite good generaly in term of performance except for the disks ... According to the fact that a polling task shouldn't exceed 5 min, i'm in some trouble ... :-/ A polling session (not the first one), needs 25min to be completed :_( Except the fact that i should optimize my rrd storage, is there is some particular settings for such installation ? Thanks in advance for your help. Tarik. 2x intel xeon X5650 (total of 24 threads), 24GB of RAM, RAID 5 logical drive with 3x15k disks

6 15

Linux detected as engenius wifi
by Marcelo Roccasalva 04 May '18

04 May '18

Hi, I running Observium CE 0.14.11.6000 (docker). I have 50 devices, half of them are Linux CentOS 6 and 7 and suddenly they appear as: Linux blh1 2.6.32-573.26.1.el6.x86_64 #1 SMP Wed May 4 00:57:44 UTC 2016 x86_64 Operating System EnGenius Access Point "blh1" Any help appreciated... -- Marcelo "¿No será acaso que esta vida moderna está teniendo más de moderna que de vida?" (Mafalda)

2 1

Customizing Login screen
by mal＠platinumnetworks.com.au 04 May '18

04 May '18

Adam - I run the subscription edition. Do you have any problems if I customise the login page and replace the hamster with our company logo? Thanks Mal

4 4

Professional Query
by Duncan Mooi 03 May '18

03 May '18

Hi, Is it possible to get a trial copy of Professional before purchasing, we would like to test it fully before committing.. Regards, DM

3 2

Generate Monthly report
by Haryanto Jayusman 03 May '18

03 May '18

Hi, Where is the feature on Community Edition for : The ability to view a weekly/monthly report of information from specific devices. The ability to report: -Traffic -Errors -Device Up/Downs -High Mem/CPU Email reports each week/month.

2 1

Anybody else see this article about observium from ITWorld
by Sam Jones 02 May '18

02 May '18

https://www.itworld.com/article/3269279/network-monitoring/review-observium… Disagree with most of the cons! *Sam Jones *

3 2

Most up to date API Documentation
by Stephan Roy 01 May '18

01 May '18

Hi, We’ve recently purchased Observium to automate how we collect bandwidth usage data for billing our clients. By luck, I was able to find the /api/v0/bills endpoint which does not exist in the documentation at http://docs.observium.org/api/. After seeing that I’m wondering if there are other undocumented endpoints, or query parameters that could be useful. Does anyone have access to the most recent API doc that they could send me or point me towards? Thanks, Steph

1 0

Problem with the new CLICKATELL API
by Eric LESIGNE 01 May '18

01 May '18

Hello, Clickatell's SMS notification service has changed its API mode. The configuration in OBSERVIUM no longer allows to use to send SMS on the new platform. On the Clickatell site the configuration of the old API mode is no longer accessible. I'm looking for a solution so that it can work with the new API mode. The new mode of operation: https://platform.clickatell.com/messages/http/send?apiKey=xxxxxxxxxxxxxxxx=… <https://platform.clickatell.com/messages/http/send?apiKey=xxxxxxxxxxxxxxxx=…> Instead of: https: //api.clickatell.com <http://api.clickatell.com/>&/http/sendmsg user = password = xxxx xxxx xxxx = api_id & to = & text = xxxx xxxx? Thank you for your help.

2 3

Graph Interpretation Questions
by TLee 27 Apr '18

27 Apr '18

Good morning/ evening! I have a complete Ovservium noob question to ask that i am a little embarrassed to ask, but i’m biting the bullet! Currently running the subscription edition on a CentOS install - everything patched and current as of yesterday. My question is about the graphs. I have attached a pic of a graph from a single port on a cisco switch - and i am interesred in the ‘In’ traffic —> there is a single, green, ‘in’ reference in the legend, but there are three distinct green indicators in the graph —> which one actually correllates to ‘In’, and why are there multiples. Thanks! TL Sent from encrypted [ProtonMail](https://protonmail.ch). Sent from ProtonMail Mobile

2 1

observium graph not showing anything
by Nicholas 27 Apr '18

27 Apr '18

Hi, Good day. I have problem with my observium graph not showing anything. I aldi make sure the config.php does not have empty line, tried switching browser, give permission to rrd folder. but it still not showing anything. My /opt/observium/logs does not give any error. May I know how may I trobleshoot this? Attached is some information from my observium server. My setup is on centos7 and my monitoring device is a windows 10 latop. Also, in graph 2, the timing in the filter and the timing in the graph is different. (refer to graph2.jpg) I did perform time modification after setup observium and the time on the graph did changed to the correct time. But the filter is showing different time. I try remove the observium folder, and reunpack, drop database and recreate the database. Still the result is the same. I wonder if this is the reason the graph is not working. Really appreciate if anyone can help out on this. -- Thank you. Regards, Nicholas

1 0

Change in license and user
by Carlos Alvarado Lobo 26 Apr '18

26 Apr '18

Hi all, - In a Pro subscription, can the license username and email user be changed? I need to deliver the license to third party with their credentials! - How can I purchase 3 years of updates? I need to deliver 3 years of updates for a project! or I have to purchase it year by year! Thanks! Carlos

1 0

alert check
by Arnoldo Vidal Bravo 26 Apr '18

26 Apr '18

Hi, we have an alert check of a port state, but iftype can be ethernetCsmacd or gigabitEthernet How I can create an alert with these condition? Entity-> ifType equals ethernetCsmacd or gigabitEthernet ??? Port is enabled, but operationally down Port ifAdminStatus equals upifOperStatus notequals up ALL * ifType equals ethernetCsmacd -- Saluda cordialmente

2 1

Syslog rules
by Rami Kytölä 26 Apr '18

26 Apr '18

Hi, Is there a way to get Syslog rules/alerts to work? Syslogs are configured and are populating database: [cid:image001.png@01D3DCB8.A9247BB0] Syslogs are also linked to correct devices with correct priorities. We have set-up few rules: [cid:image002.png@01D3DCB8.A9247BB0] But if I try with our test rule: [cid:image003.png@01D3DCB8.A9247BB0] Then if I search from the syslog: [cid:image004.png@01D3DCB8.E2C65BE0] --------------------------------------------------- Ramiky -----------------------------------------------------

3 7

Professional Edition Subcription
by Carlos Alvarado Lobo 25 Apr '18

25 Apr '18

Hi all! I have a Community Edition installed, and I purchased a Professional License. Can I upgrade the community edition in a testing installation?? and then install the license in the production installation? the testing and production installations are in different hardware! We need to made testing with notification before put on production! Thanks in advance. Carlos Alvarado

3 2