- observium - lists.observium.org

unable to add device from Web UI in 9017
by Richard Wigzell 31 Jan '18

31 Jan '18

Hello, we have updated to 9017 and are not able to add a device from web UI but can fine from the CLI. We just get this: [cid:image002.png@01D39A12.6C361990] Anyone having this issue ? or suggestions welcome please. [cid:image001.jpg@01CE9215.D39244B0]<https://www.it.ox.ac.uk/> Richard Wigzell Technical Lead, Storage Platforms IT Services | University of Oxford 13 Banbury Road, Oxford OX2 6NN T: 01865 616282 www.it.ox.ac.uk<https://www.it.ox.ac.uk/>

4 6

Cannot login. can this be license related?
by Henrik Cednert (Filmlance) 30 Jan '18

30 Jan '18

Hello Noticed yesterday that I had issues logging in to observium and the issues have continued. I don't get any error it just reloads the page and asks for user/pass, no "wrong password", "unknown user" nor "license error". I have looked in all logs I can think of but I cannot find a trace of what could be causing this. I have some sort of memory that there was some oddness when you renew your license. I can run 'svn update' though and if it was license related I don't think that works, right? Tried update AFTER I realised I cannot login, so not related to update. Nothing have changed in the environment or with the installation. Any pointers to where I should look for clues? Cheers and thanks -- Henrik Cednert cto | ...and then some Filmlance International mobile [ + 46 (0)704 71 89 54 ] skype [ cednert ]

3 3

netflow analyzer
by Farshid Abediny 28 Jan '18

28 Jan '18

Hello, is there anyway that add a integrated netflow analyzer to observium? thanks.

2 1

Monitoring MPLS LSPs
by Luis Balbinot 26 Jan '18

26 Jan '18

Hello there. I've just started working on a new module to include support for MPLS LSPs. Since I only have access to Juniper hardware I'm only working exclusively with the MPLS-MIB but it should be fairly easy to support other MIBs (like Cisco's MPLS-TE mib) because the dataset is pretty much the same. I have the discovery and polling modules ready. If anyone with experience on the web interface wants to join me, please let me know. Luis

2 1

Alerts on custom OID
by Brad Bendy 23 Jan '18

23 Jan '18

Hi, Trying to setup alerts on custom OID, my OID returns just a number and want to alert if it's above or below that. What do I use for the conditions? Im assuming fort the device associations I can reference by hostname or is there other OID/SNMP specific ones? I don't see this anywhere in the docs. So no clue what to put :) Thanks!

2 2

No Syslog alert notifications
by Richard Wigzell 18 Jan '18

18 Jan '18

Hello, we have syslog alert rules setup that are creating syslog alerts and we have a valid contact associated but we do not receive alert notifications. [cid:image002.png@01D3907B.8F6870C0] [cid:image003.png@01D3907C.7B0891E0] Email: [cid:image004.png@01D3907C.7B0891E0] We are running pro 8993. All other alerts working fine. Any help would be appreciated. Regards [cid:image001.jpg@01CE9215.D39244B0]<https://www.it.ox.ac.uk/> Richard Wigzell Technical Lead, Storage Platforms IT Services | University of Oxford 13 Banbury Road, Oxford OX2 6NN T: 01865 616282 www.it.ox.ac.uk<https://www.it.ox.ac.uk/>

1 0

Traps
by Arnoldo Vidal Bravo 18 Jan '18

18 Jan '18

hi, i'm deploying observium but it send mails on trap receive? -- Saluda cordialmente

5 5

wifi_ap table missing?
by Simon Mousey Smith 18 Jan '18

18 Jan '18

Hi All Has anybody else seen this issue? It appears the wifi_aps table is missing? However I do have an wifi_accesspoints table? [2018/01/12 00:33:21 +0000] discovery.php(1241): Failed dbQuery (#1146 - Table 'observium.wifi_aps' doesn't exist), Query: SELECT * FROM `wifi_aps` WHERE `device_id` = ’38' SiMacBookPro:Observium Simon$ grep -r "wifi_aps" * html/pages/device.inc.php: $device_ap_count = dbFetchCell('SELECT COUNT(wifi_ap_id) FROM `wifi_aps` WHERE `device_id` = ?', array($device['device_id'])); html/pages/device/wifi/accesspoints.inc.php: $accesspoints = dbFetchRows('SELECT * FROM `wifi_aps` WHERE `device_id` = ? ORDER BY `ap_name` ASC', array($device['device_id'])); includes/discovery/wifi.inc.php:foreach (dbFetchRows("SELECT * FROM `wifi_aps` WHERE `device_id` = ?", array($device['device_id'])) as $ap) includes/discovery/wifi.inc.php: $GLOBALS['cache']['wifi_aps'][$ap['ap_index']] = $ap; includes/definitions/entities.inc.php:$config['entities'][$entity]['table'] = "wifi_aps"; includes/wifi.inc.php: if (is_array($GLOBALS['cache']['wifi_aps'][$ap['ap_index']])) includes/wifi.inc.php: $ap_db = $GLOBALS['cache']['wifi_aps'][$ap['ap_index']]; includes/wifi.inc.php: dbUpdate($update, 'wifi_aps', '`wifi_ap_id` = ?', array($ap_db['wifi_ap_id'])); includes/wifi.inc.php: $ap_id = dbInsert($insert, 'wifi_aps'); includes/wifi.inc.php: $GLOBALS['cache']['wifi_aps'][$ap['ap_index']] = $params; SiMacBookPro:Observium Simon$ grep -r "wifi_accesspoints" * html/includes/print/dot1xtable.inc.php: $aps_db = dbFetchRows("SELECT `wifi_accesspoint_id`, `name`, `ap_number` FROM `wifi_accesspoints`"); html/includes/search/accesspoints.inc.php:$results = dbFetchRows("SELECT * FROM `wifi_accesspoints` html/includes/graphs/wifi/auth.inc.php: $radio = dbFetchRow("SELECT * FROM `wifi_accesspoints`, `wifi_radios` WHERE `wifi_accesspoints`.`wifi_accesspoint_id` = `wifi_radios`.`accesspoint_id` AND `wifi_radios`.`wifi_radio_id` = ? ", array($vars['id'])); html/pages/device/wifi/overview.inc.php: $radios = dbFetchRows("SELECT * FROM `wifi_accesspoints` LEFT JOIN `wifi_radios` ON `wifi_accesspoints`.`wifi_accesspoint_id` = `wifi_radios`.`radio_ap` WHERE `wifi_accesspoints`.`device_id` = ? ", array($device['device_id'])); html/pages/device/wifi/accesspoint.inc.php: $radios = dbFetchRows("SELECT * FROM `wifi_accesspoints`, `wifi_radios` WHERE `wifi_accesspoints`.`wifi_accesspoint_id` = `wifi_radios`.`radio_ap` AND `device_id` = ? AND `wifi_accesspoints`.`wifi_accesspoint_id` = ? ORDER BY `radio_number` ASC", array($device['device_id'], $vars['accesspoint'])); includes/polling/wifi/trapeze-networks-client-session-mib.inc.php:$radios_db = dbFetchRows("SELECT `wifi_radio_id`, `radio_number`,`ap_number`, `wifi_accesspoints`.`device_id` FROM `wifi_accesspoints`, `wifi_radios` WHERE `wifi_radios`.`radio_ap` = wifi_accesspoints.`wifi_accesspoint_id` AND wifi_accesspoints.`device_id` = ?", array($device['device_id'])); includes/definitions.inc.php: 'ucd_diskio', 'vlans', 'vlans_fdb', 'vminfo', 'vrfs', 'wifi_accesspoints', 'wifi_sessions', includes/discovery/wifi/trapeze-networks-ap-config-mib.inc.php:$accesspoints_db = dbFetchRows("SELECT `name`, `model`, `location`, `fingerprint`, `serial`, `device_id`, `ap_number` FROM `wifi_accesspoints` WHERE `device_id` = ?", array($device['device_id'])); includes/discovery/wifi/trapeze-networks-ap-config-mib.inc.php: $accesspoint_id = dbInsert($db_insert, 'wifi_accesspoints'); includes/discovery/wifi/trapeze-networks-ap-config-mib.inc.php: $updated = dbUpdate($db_insert, 'wifi_accesspoints', '`ap_number` = ? AND `device_id` = ?', array($ap_number, $device['device_id'])); includes/discovery/wifi/trapeze-networks-ap-config-mib.inc.php:$accesspoints_db = dbFetchRows("SELECT `wifi_accesspoint_id`, `ap_number` FROM `wifi_accesspoints` WHERE `device_id` = ?", array($device['device_id'])); update/db_schema_mysql.sql:-- Table structure for table `wifi_accesspoints` update/db_schema_mysql.sql:CREATE TABLE `wifi_accesspoints` ( update/db_schema_mysql.sql:-- Indexes for table `wifi_accesspoints` update/db_schema_mysql.sql:ALTER TABLE `wifi_accesspoints` update/db_schema_mysql.sql:-- AUTO_INCREMENT for table `wifi_accesspoints` update/db_schema_mysql.sql:ALTER TABLE `wifi_accesspoints` update/141.sql:CREATE TABLE `wifi_accesspoints` ( `wifi_accesspoint_id` int(11) NOT NULL AUTO_INCREMENT, `device_id` int(11) NOT NULL, `ap_number` int(11) DEFAULT NULL, `name` varchar(45) DEFAULT NULL, `serial` varchar(45) DEFAULT NULL, `model` varchar(45) DEFAULT NULL, `location` varchar(45) DEFAULT NULL, `fingerprint` varchar(45) DEFAULT NULL, `delete` tinyint(4) DEFAULT NULL, PRIMARY KEY (`wifi_accesspoint_id`)); update/186.sql:ALTER TABLE `wifi_accesspoints` CONVERT TO CHARACTER SET utf8 COLLATE utf8_unicode_ci; SiMacBookPro:Observium Simon$ I can see when looking threw the code quickly that the is a sql file for wifi_accesspoints but not one for wifi_aps Can I just clone/copy the wifi_accesspoints table to wifi_aps? Regards Simon - Hestor Ltd

5 7

Observium Rolling PRO - status summary showing wrong info
by Serghei Golipad 18 Jan '18

18 Jan '18

Hi Guys, Ever since updating to php7 I'm seeing devices down in status summary but when I go to click on them it's not showing anything. I know for a fact there are no devices down. It happens very frequently on daily basis. Cheers PLEASE CONSIDER THE ENVIRONMENT BEFORE PRINTING THIS EMAIL. CDW Limited is a Company registered in England and Wales. This email is sent for and on behalf of CDW Finance Holdings Limited. CDW Finance Holdings Limited is the UK holding company for CDW Limited trading as CDW. The registered office for CDW Finance Holdings Limited (Company Number 05872067) and its UK group undertakings is 10 Fleet Place, London, EC4M 7RB. VAT Registration 902 1949 39. Confidentiality: This e-mail contains proprietary information, some or all of which may be confidential and/or legally privileged. It is for the intended recipient only. If an addressing or transmission error has misdirected this e-mail, please notify the author by replying to this e-mail and then delete the original. If you are not the intended recipient you may not use, disclose, distribute, copy, print or rely on any information contained in this e-mail. You must not inform any other person other than CDW or the sender of its existence. For more information about CDW please visit www.uk.cdw.com

2 4

MIB support for UniFi APs and controller
by Thomas Stather 17 Jan '18

17 Jan '18

Hello Id like to ask to add the support for UniFi APs (gen1 and 2 should be working, gen3 has issues as far as i know). Ubiquiti networks provide 2 MIBs which are attached. One is for the UniFi controller, one for all APs I saw that there is a feature request for the CE at [1], but as i read there hasn't been any real progress yet. If i can help somethin in this matter, please let me know (we have quite a bunch of gen1 and 2 APs, thats why i ask). Best, Thomas [1]: http://jira.observium.org/browse/OBS-1990 -- Thomas Stather IT Services VCP4, VCP6-DCV Tel: +49 6221-486 628 Fax: +49 6221-486 561 ------------------------------------------------------------------------ Max Planck Institute for Medical Research (MPImF) Jahnstrasse 29, 69120 Heidelberg Germany

1 0

email alerts
by Ben Filippelli 17 Jan '18

17 Jan '18

In the doc it says under Alert Settings - this is only applicable to subscription edition. Does that mean just the first item (alerter = true)? Or the entire alert settings config http://docs.observium.org/config_options/#alert-settings Right now we get #slack alerts but not email, I see that in config.php Im missing the line for $config['email']['enable'] = TRUE; But also wondering if the hostname should be in quotes 'mailrelay.host' or mailrelay.host thanks [cid:image001.jpg@01D34D97.AB585650]<https://www.level5mgmt.com/> Ben Filippelli IT Director 455 NW 35th St #105<http://maps.google.com/maps/place?cid=2163887490114630684&q=3200+N+federal+…> Boca Raton, FL 33431<http://maps.google.com/maps/place?cid=2163887490114630684&q=3200+N+federal+…> P:561.509.2077 x 315 F:561.300.2376 [cid:image002.jpg@01D34D97.AB585650]<mailto:support@level5mgmt.com?subject=Hi%20Level5!> [cid:image003.jpg@01D34D97.AB585650] <http://twitter.com/#!/Level5Mgmt> [cid:image004.jpg@01D34D97.AB585650] <http://fb.com/level5mgmt> Our Success is built on referrals from satisfied clients!

1 1

customize alerts
by Arnoldo Vidal Bravo 16 Jan '18

16 Jan '18

Where i can customize alerts? because we sendit by SMS. We need shortest messages. -- Saluda cordialmente

1 0

Port Description parsing doesn't work for custom port desctiptions
by Vlad Kratsberg 13 Jan '18

13 Jan '18

HI, Ager setting up observium with distributed pollers we are no longer able to display stats for our custom defined ports, while Descriptions that are built work just fine ( Transit, Peering,Core ). For example in config.php we have the following. $config['int_groups'][] = "DCI"; Selecting DCI from Ports menu would display the following: [image: Inline image 1] I also noticed that port_descr_type column in ports table is not being populated resulting in description parsing not to work: [image: Inline image 2] Did anyone experience something similar ? I would appreciate any help. Thank you

3 4

Re: [Observium] Missing ethernet port when monitoring Synology NAS
by Adam Armstrong 12 Jan '18

12 Jan '18

It'd be wiser if debian didn't keep fucking up their distro by making massive default-level changes to behaviour. 9 /used/ to work. Mariadb /used/ to work. adam. Adam Armstrong Managing Director & Lead Architect Observium Limited http://www.observium.org http://docs.observium.org http://jira.observium.org On 2018-01-12 13:06:36, Edwin Dijkstra <e.r.dijkstra(a)ziggo.nl> wrote: Hi, I Installed Jessie (Debian 8), PHP5 and mysql and now it’s working fine (all interfaces show up). (Perhaps it’s wise to not mention the Debian 9 (and mariadb) option in the install guide) Regards, Edwin I will install a Jessie version (Debian 8) and mysql instead of MariaDB. I’ll let you know. Thanks for now. Regards, Edwin From: observium [mailto:observium-bounces@observium.org] On Behalf Of Adam Armstrong Sent: Thursday, January 11, 2018 7:26 PM To: observium(a)observium.org Subject: Re: [Observium] Missing ethernet port when monitoring Synology NAS Try removing MariaDB and finding a MySQL package somewhere. That database is behaving strangely. adam. Adam Armstrong Managing Director & Lead Architect Observium Limited http://www.observium.org [http://www.observium.org] http://docs.observium.org [http://docs.observium.org] http://jira.observium.org [http://jira.observium.org] On 2018-01-11 16:48:14, Edwin Dijkstra <e.r.dijkstra(a)ziggo.nl [mailto:e.r.dijkstra@ziggo.nl]> wrote: In my case: Server version: 10.1.23-MariaDB-9+deb9u1 Raspbian 9.0 (For the time being, it’s running on a Raspberry Pi (just to see whether Observium will work for me) I followed the Debian/Ubuntu installation guide on the Observium website. Regards, Edwin From: observium [mailto:observium-bounces@observium.org [mailto:observium-bounces@observium.org]] On Behalf Of Adam Armstrong Sent: Thursday, January 11, 2018 5:19 PM To: observium(a)observium.org [mailto:observium@observium.org] Subject: Re: [Observium] Missing ethernet port when monitoring Synology NAS This is not an Observium issue, this is a weirdly configured database issue. This isn't the first time recently there's been someone seeing db insert problems that make zero sense. It's complaining about duplicate PRIMARY key, but that key is just port_id, which is AUTO_INCREMENT. If it thinks there's a duplicate of an AUTO_INCREMENTING primary key, it's the MySQL server being utterly broken. It probably also explains why that guy with the the routeros device couldn't insert more than two devices either. Presumably they're both running the same broken MySQL. Has someone packed up a MySQL in some distro with dumb settings? What OS is this running on, and where did the MySQL package come from? adam. Adam Armstrong Managing Director & Lead Architect Observium Limited http://www.observium.org [http://www.observium.org] http://docs.observium.org [http://docs.observium.org] http://jira.observium.org [http://jira.observium.org] On 2018-01-11 16:09:29, Tom Laermans <tom.laermans(a)powersource.cx [mailto:tom.laermans@powersource.cx]> wrote: Looks like ifAlias isn't being returned. The INSERT passes '' to be inserted, which defaults to 0, but can only work for the first interface a device has... Tom On 01/11/2018 05:03 PM, Edwin Dijkstra wrote: Ran the discovery, part of the output: o Discovering ports . SQL[INSERT INTO `ports` (`device_id`,`ifIndex`,`ifAlias`,`ifDescr`,`ifName`,`ifType`) VALUES ('5','2','','eth0','eth0','ethernetCsmacd')] SQL RUNTIME[0.00110412s] ERROR[Error in query: (Duplicate entry '0' for key 'PRIMARY') 1062] SQL[SELECT * FROM `ports` WHERE `device_id` = '5' AND `ifIndex` = '2'] SQL RUNTIME[0.00229788s] eth0(2)[] SQL[INSERT INTO `ports` (`device_id`,`ifIndex`,`ifAlias`,`ifDescr`,`ifName`,`ifType`) VALUES ('5','3','','sit0','sit0','tunnel')] SQL RUNTIME[0.00102282s] ERROR[Error in query: (Duplicate entry '0' for key 'PRIMARY') 1062] A database issue? Regards, Edwin From: observium [mailto:observium-bounces@observium.org [mailto:observium-bounces@observium.org]] On Behalf Of Adam Armstrong Sent: Wednesday, January 10, 2018 10:48 PM To: observium(a)observium.org [mailto:observium@observium.org] Subject: Re: [Observium] Missing ethernet port when monitoring Synology NAS ./discovery.php -h <hostname> -m ports -d adam. Adam Armstrong Managing Director & Lead Architect Observium Limited http://www.observium.org [http://www.observium.org] http://docs.observium.org [http://docs.observium.org] http://jira.observium.org [http://jira.observium.org] On 2018-01-10 16:06:16, Edwin Dijkstra <e.r.dijkstra(a)ziggo.nl [mailto:e.r.dijkstra@ziggo.nl]> wrote: That’s what I thought;) When I scan the device using a simple SNMP tester, 3 IF’s are found: Found standard interfaces: 1:lo: (001) lo Traffic,Connected,10 MBit/s,Software Loopback,lo, 64 Bit 2:eth0: (002) eth0 Traffic,Connected,1 GBit/s,Ethernet,eth0, 64 Bit 3:sit0: (003) sit0 Traffic,Not Connected,,Tunnel,sit0, 64 Bit Testing standard interfaces... 1/10/2018 4:41:48 PM (861 ms) : SNMP Datatype: ASN_APP_COUNTER64 1/10/2018 4:41:48 PM (865 ms) : SNMP Datatype: ASN_APP_COUNTER64 Test 1:lo (1.3.6.1.2.1.31.1.1.1.6.1,1.3.6.1.2.1.31.1.1.1.10.1): in=1891611 out=1891611 1/10/2018 4:41:48 PM (871 ms) : SNMP Datatype: ASN_APP_COUNTER64 1/10/2018 4:41:48 PM (877 ms) : SNMP Datatype: ASN_APP_COUNTER64 Test 2:eth0 (1.3.6.1.2.1.31.1.1.1.6.2,1.3.6.1.2.1.31.1.1.1.10.2): in=92965523517 out=2582822450 1/10/2018 4:41:48 PM (884 ms) : SNMP Datatype: ASN_APP_COUNTER64 1/10/2018 4:41:48 PM (887 ms) : SNMP Datatype: ASN_APP_COUNTER64 Test 3:sit0 (1.3.6.1.2.1.31.1.1.1.6.3,1.3.6.1.2.1.31.1.1.1.10.3): in=0 out=0 In Observium I only see the lo IF: Regards, Regards, Edwin From: observium [mailto:observium-bounces@observium.org [mailto:observium-bounces@observium.org]] On Behalf Of Adam Armstrong Sent: Wednesday, January 10, 2018 4:26 PM To: 'Observium' Cc: 'Observium' Subject: Re: [Observium] Missing ethernet port when monitoring Synology NAS Monitoring interfaces is about as industry standard as it gets. If we're not picking up a port, it's because your device is bizarrely not exposing it. Have you tried walking the ifTable and seeing if it's present? Adam. Sent from BlueMail [http://www.bluemail.me/r?b=11687] On 9 Jan 2018, at 16:42, Edwin Dijkstra <e.r.dijkstra(a)ziggo.nl [mailto:e.r.dijkstra@ziggo.nl]> wrote: Hi, I’m pretty new on ObserviumJ and could use some help: Added my Synology NAS. Want to monitor also the Network interface, but the only port I see is the loopback IF… Thanks in advance. Regards, Edwin observium mailing list observium(a)observium.org [mailto:observium@observium.org] http://postman.memetic.org/cgi-bin/mailman/listinfo/observium [http://postman.memetic.org/cgi-bin/mailman/listinfo/observium] _______________________________________________ observium mailing list observium(a)observium.org [mailto:observium@observium.org] http://postman.memetic.org/cgi-bin/mailman/listinfo/observium [http://postman.memetic.org/cgi-bin/mailman/listinfo/observium]

1 1

Re: [Observium] Missing ethernet port when monitoring Synology NAS
by Adam Armstrong 12 Jan '18

12 Jan '18

Try removing MariaDB and finding a MySQL package somewhere. That database is behaving strangely. adam. Adam Armstrong Managing Director & Lead Architect Observium Limited http://www.observium.org http://docs.observium.org http://jira.observium.org On 2018-01-11 16:48:14, Edwin Dijkstra <e.r.dijkstra(a)ziggo.nl> wrote: In my case: Server version: 10.1.23-MariaDB-9+deb9u1 Raspbian 9.0 (For the time being, it’s running on a Raspberry Pi (just to see whether Observium will work for me) I followed the Debian/Ubuntu installation guide on the Observium website. Regards, Edwin From: observium [mailto:observium-bounces@observium.org] On Behalf Of Adam Armstrong Sent: Thursday, January 11, 2018 5:19 PM To: observium(a)observium.org Subject: Re: [Observium] Missing ethernet port when monitoring Synology NAS This is not an Observium issue, this is a weirdly configured database issue. This isn't the first time recently there's been someone seeing db insert problems that make zero sense. It's complaining about duplicate PRIMARY key, but that key is just port_id, which is AUTO_INCREMENT. If it thinks there's a duplicate of an AUTO_INCREMENTING primary key, it's the MySQL server being utterly broken. It probably also explains why that guy with the the routeros device couldn't insert more than two devices either. Presumably they're both running the same broken MySQL. Has someone packed up a MySQL in some distro with dumb settings? What OS is this running on, and where did the MySQL package come from? adam. Adam Armstrong Managing Director & Lead Architect Observium Limited http://www.observium.org [http://www.observium.org] http://docs.observium.org [http://docs.observium.org] http://jira.observium.org [http://jira.observium.org] On 2018-01-11 16:09:29, Tom Laermans <tom.laermans(a)powersource.cx [mailto:tom.laermans@powersource.cx]> wrote: Looks like ifAlias isn't being returned. The INSERT passes '' to be inserted, which defaults to 0, but can only work for the first interface a device has... Tom On 01/11/2018 05:03 PM, Edwin Dijkstra wrote: Ran the discovery, part of the output: o Discovering ports . SQL[INSERT INTO `ports` (`device_id`,`ifIndex`,`ifAlias`,`ifDescr`,`ifName`,`ifType`) VALUES ('5','2','','eth0','eth0','ethernetCsmacd')] SQL RUNTIME[0.00110412s] ERROR[Error in query: (Duplicate entry '0' for key 'PRIMARY') 1062] SQL[SELECT * FROM `ports` WHERE `device_id` = '5' AND `ifIndex` = '2'] SQL RUNTIME[0.00229788s] eth0(2)[] SQL[INSERT INTO `ports` (`device_id`,`ifIndex`,`ifAlias`,`ifDescr`,`ifName`,`ifType`) VALUES ('5','3','','sit0','sit0','tunnel')] SQL RUNTIME[0.00102282s] ERROR[Error in query: (Duplicate entry '0' for key 'PRIMARY') 1062] A database issue? Regards, Edwin From: observium [mailto:observium-bounces@observium.org [mailto:observium-bounces@observium.org]] On Behalf Of Adam Armstrong Sent: Wednesday, January 10, 2018 10:48 PM To: observium(a)observium.org [mailto:observium@observium.org] Subject: Re: [Observium] Missing ethernet port when monitoring Synology NAS ./discovery.php -h <hostname> -m ports -d adam. Adam Armstrong Managing Director & Lead Architect Observium Limited http://www.observium.org [http://www.observium.org] http://docs.observium.org [http://docs.observium.org] http://jira.observium.org [http://jira.observium.org] On 2018-01-10 16:06:16, Edwin Dijkstra <e.r.dijkstra(a)ziggo.nl [mailto:e.r.dijkstra@ziggo.nl]> wrote: That’s what I thought;) When I scan the device using a simple SNMP tester, 3 IF’s are found: Found standard interfaces: 1:lo: (001) lo Traffic,Connected,10 MBit/s,Software Loopback,lo, 64 Bit 2:eth0: (002) eth0 Traffic,Connected,1 GBit/s,Ethernet,eth0, 64 Bit 3:sit0: (003) sit0 Traffic,Not Connected,,Tunnel,sit0, 64 Bit Testing standard interfaces... 1/10/2018 4:41:48 PM (861 ms) : SNMP Datatype: ASN_APP_COUNTER64 1/10/2018 4:41:48 PM (865 ms) : SNMP Datatype: ASN_APP_COUNTER64 Test 1:lo (1.3.6.1.2.1.31.1.1.1.6.1,1.3.6.1.2.1.31.1.1.1.10.1): in=1891611 out=1891611 1/10/2018 4:41:48 PM (871 ms) : SNMP Datatype: ASN_APP_COUNTER64 1/10/2018 4:41:48 PM (877 ms) : SNMP Datatype: ASN_APP_COUNTER64 Test 2:eth0 (1.3.6.1.2.1.31.1.1.1.6.2,1.3.6.1.2.1.31.1.1.1.10.2): in=92965523517 out=2582822450 1/10/2018 4:41:48 PM (884 ms) : SNMP Datatype: ASN_APP_COUNTER64 1/10/2018 4:41:48 PM (887 ms) : SNMP Datatype: ASN_APP_COUNTER64 Test 3:sit0 (1.3.6.1.2.1.31.1.1.1.6.3,1.3.6.1.2.1.31.1.1.1.10.3): in=0 out=0 In Observium I only see the lo IF: Regards, Regards, Edwin From: observium [mailto:observium-bounces@observium.org [mailto:observium-bounces@observium.org]] On Behalf Of Adam Armstrong Sent: Wednesday, January 10, 2018 4:26 PM To: 'Observium' Cc: 'Observium' Subject: Re: [Observium] Missing ethernet port when monitoring Synology NAS Monitoring interfaces is about as industry standard as it gets. If we're not picking up a port, it's because your device is bizarrely not exposing it. Have you tried walking the ifTable and seeing if it's present? Adam. Sent from BlueMail [http://www.bluemail.me/r?b=11687] On 9 Jan 2018, at 16:42, Edwin Dijkstra <e.r.dijkstra(a)ziggo.nl [mailto:e.r.dijkstra@ziggo.nl]> wrote: Hi, I’m pretty new on ObserviumJ and could use some help: Added my Synology NAS. Want to monitor also the Network interface, but the only port I see is the loopback IF… Thanks in advance. Regards, Edwin observium mailing list observium(a)observium.org [mailto:observium@observium.org] http://postman.memetic.org/cgi-bin/mailman/listinfo/observium [http://postman.memetic.org/cgi-bin/mailman/listinfo/observium] _______________________________________________ observium mailing list observium(a)observium.org [mailto:observium@observium.org] http://postman.memetic.org/cgi-bin/mailman/listinfo/observium [http://postman.memetic.org/cgi-bin/mailman/listinfo/observium]

2 2

Problem Montioring SVC in Observium
by Haryanto Jayusman 12 Jan '18

12 Jan '18

Hi Observium, Can you help me? I have a problem when created svc for checking service Can observium check services in server? Like synology iscsi service status Because i want monitoring this service for user requiretment. Thanks & Please review configuration Regards, Haryanto Jayusman

3 3

Re: [Observium] Missing ethernet port when monitoring Synology NAS
by Roeland Mertens 12 Jan '18

12 Jan '18

> I will install a Jessie version (Debian 8) and mysql instead of > MariaDB. I’ll let you know. Thanks for now. > > Regards, > > Edwin > <..snip...> Just out of curiosity, what does "show create table ports\G" say? rgds, -- Roeland

1 0

Re: [Observium] Missing ethernet port when monitoring Synology NAS
by Simon Mousey Smith 12 Jan '18

12 Jan '18

HI All Im having a similar issue in relations to ports strangely enough? Its only started happened since last SVN update which was midday today [2018/01/11 21:57:18 +0000] poller.php(17372): Failed dbQuery (#1062 - Duplicate entry '30-4' for key 'device_ifIndex'), Query: INSERT INTO `ports` (`device_id`,`ifIndex`) VALUES ('30','4’) Observium 17.12.8997 (26th December 2017) OS Linux 4.4.0-109-generic [amd64] (Ubuntu 16.04) Apache 2.4.18 (Ubuntu) PHP 7.0.22-0ubuntu0.16.04.1 (OPcache: ENABLED) Python 2.7.12 MySQL 5.7.20-0ubuntu0.16.04.1 (extension: mysqli 5.0.12-dev) SNMP NET-SNMP 5.7.3 RRDtool 1.5.5 Any suggestions? Regards Simon > On 11 Jan 2018, at 19:37, Edwin Dijkstra <e.r.dijkstra(a)ziggo.nl> wrote: > > I will install a Jessie version (Debian 8) and mysql instead of MariaDB. I’ll let you know. Thanks for now. > > Regards, > > Edwin > > > From: observium [mailto:observium-bounces@observium.org <mailto:observium-bounces@observium.org>] On Behalf Of Adam Armstrong > Sent: Thursday, January 11, 2018 7:26 PM > To: observium(a)observium.org <mailto:observium@observium.org> > Subject: Re: [Observium] Missing ethernet port when monitoring Synology NAS > > Try removing MariaDB and finding a MySQL package somewhere. That database is behaving strangely. > > adam. > > Adam Armstrong > Managing Director & Lead Architect > Observium Limited > http://www.observium.org <http://www.observium.org/> > http://docs.observium.org <http://docs.observium.org/> > http://jira.observium.org <http://jira.observium.org/>On 2018-01-11 16:48:14, Edwin Dijkstra <e.r.dijkstra(a)ziggo.nl <mailto:e.r.dijkstra@ziggo.nl>> wrote: >> >> In my case: >> >> Server version: 10.1.23-MariaDB-9+deb9u1 Raspbian 9.0 >> >> (For the time being, it’s running on a Raspberry Pi (just to see whether Observium will work for me) >> >> I followed the Debian/Ubuntu installation guide on the Observium website. >> >> Regards, >> >> Edwin >> >> >> From: observium [mailto:observium-bounces@observium.org <mailto:observium-bounces@observium.org>] On Behalf Of Adam Armstrong >> Sent: Thursday, January 11, 2018 5:19 PM >> To: observium(a)observium.org <mailto:observium@observium.org> >> Subject: Re: [Observium] Missing ethernet port when monitoring Synology NAS >> >> This is not an Observium issue, this is a weirdly configured database issue. This isn't the first time recently there's been someone seeing db insert problems that make zero sense. >> >> It's complaining about duplicate PRIMARY key, but that key is just port_id, which is AUTO_INCREMENT. If it thinks there's a duplicate of an AUTO_INCREMENTING primary key, it's the MySQL server being utterly broken. It probably also explains why that guy with the the routeros device couldn't insert more than two devices either. Presumably they're both running the same broken MySQL. >> >> Has someone packed up a MySQL in some distro with dumb settings? >> >> What OS is this running on, and where did the MySQL package come from? >> >> adam. >> >> Adam Armstrong >> Managing Director & Lead Architect >> Observium Limited >> http://www.observium.org <http://www.observium.org/> >> http://docs.observium.org <http://docs.observium.org/> >> http://jira.observium.org <http://jira.observium.org/>On 2018-01-11 16:09:29, Tom Laermans <tom.laermans(a)powersource.cx <mailto:tom.laermans@powersource.cx>> wrote: >>> >>> Looks like ifAlias isn't being returned. The INSERT passes '' to be inserted, which defaults to 0, but can only work for the first interface a device has... >>> >>> Tom >>> >>> >>> On 01/11/2018 05:03 PM, Edwin Dijkstra wrote: >>>> Ran the discovery, part of the output: >>>> >>>> o Discovering ports . >>>> SQL[INSERT INTO `ports` (`device_id`,`ifIndex`,`ifAlias`,`ifDescr`,`ifName`,`ifType`) VALUES ('5','2','','eth0','eth0','ethernetCsmacd')] >>>> SQL RUNTIME[0.00110412s] >>>> ERROR[Error in query: (Duplicate entry '0' for key 'PRIMARY') 1062] >>>> >>>> SQL[SELECT * FROM `ports` WHERE `device_id` = '5' AND `ifIndex` = '2'] >>>> SQL RUNTIME[0.00229788s] >>>> eth0(2)[] >>>> SQL[INSERT INTO `ports` (`device_id`,`ifIndex`,`ifAlias`,`ifDescr`,`ifName`,`ifType`) VALUES ('5','3','','sit0','sit0','tunnel')] >>>> SQL RUNTIME[0.00102282s] >>>> ERROR[Error in query: (Duplicate entry '0' for key 'PRIMARY') 1062] >>>> >>>> A database issue? >>>> >>>> Regards, >>>> >>>> Edwin >>>> >>>> >>>> From: observium [mailto:observium-bounces@observium.org <mailto:observium-bounces@observium.org>] On Behalf Of Adam Armstrong >>>> Sent: Wednesday, January 10, 2018 10:48 PM >>>> To: observium(a)observium.org <mailto:observium@observium.org> >>>> Subject: Re: [Observium] Missing ethernet port when monitoring Synology NAS >>>> >>>> ./discovery.php -h <hostname> -m ports -d >>>> >>>> adam. >>>> >>>> Adam Armstrong >>>> Managing Director & Lead Architect >>>> Observium Limited >>>> http://www.observium.org <http://www.observium.org/> >>>> http://docs.observium.org <http://docs.observium.org/> >>>> http://jira.observium.org <http://jira.observium.org/>On 2018-01-10 16:06:16, Edwin Dijkstra <e.r.dijkstra(a)ziggo.nl <mailto:e.r.dijkstra@ziggo.nl>> wrote: >>>>> >>>>> That’s what I thought;) >>>>> >>>>> When I scan the device using a simple SNMP tester, 3 IF’s are found: >>>>> >>>>> Found standard interfaces: >>>>> 1:lo: (001) lo Traffic,Connected,10 MBit/s,Software Loopback,lo, 64 Bit >>>>> 2:eth0: (002) eth0 Traffic,Connected,1 GBit/s,Ethernet,eth0, 64 Bit >>>>> 3:sit0: (003) sit0 Traffic,Not Connected,,Tunnel,sit0, 64 Bit >>>>> >>>>> Testing standard interfaces... >>>>> 1/10/2018 4:41:48 PM (861 ms) : SNMP Datatype: ASN_APP_COUNTER64 >>>>> 1/10/2018 4:41:48 PM (865 ms) : SNMP Datatype: ASN_APP_COUNTER64 >>>>> Test 1:lo (1.3.6.1.2.1.31.1.1.1.6.1,1.3.6.1.2.1.31.1.1.1.10.1): in=1891611 out=1891611 >>>>> 1/10/2018 4:41:48 PM (871 ms) : SNMP Datatype: ASN_APP_COUNTER64 >>>>> 1/10/2018 4:41:48 PM (877 ms) : SNMP Datatype: ASN_APP_COUNTER64 >>>>> Test 2:eth0 (1.3.6.1.2.1.31.1.1.1.6.2,1.3.6.1.2.1.31.1.1.1.10.2): in=92965523517 out=2582822450 >>>>> 1/10/2018 4:41:48 PM (884 ms) : SNMP Datatype: ASN_APP_COUNTER64 >>>>> 1/10/2018 4:41:48 PM (887 ms) : SNMP Datatype: ASN_APP_COUNTER64 >>>>> Test 3:sit0 (1.3.6.1.2.1.31.1.1.1.6.3,1.3.6.1.2.1.31.1.1.1.10.3): in=0 out=0 >>>>> >>>>> In Observium I only see the lo IF: >>>>> >>>>> Regards, >>>>> >>>>> Regards, >>>>> >>>>> Edwin >>>>> >>>>> >>>>> From: observium [mailto:observium-bounces@observium.org <mailto:observium-bounces@observium.org>] On Behalf Of Adam Armstrong >>>>> Sent: Wednesday, January 10, 2018 4:26 PM >>>>> To: 'Observium' >>>>> Cc: 'Observium' >>>>> Subject: Re: [Observium] Missing ethernet port when monitoring Synology NAS >>>>> >>>>> Monitoring interfaces is about as industry standard as it gets. If we're not picking up a port, it's because your device is bizarrely not exposing it. >>>>> >>>>> Have you tried walking the ifTable and seeing if it's present? >>>>> >>>>> Adam. >>>>> >>>>> Sent from BlueMail <http://www.bluemail.me/r?b=11687> >>>>> On 9 Jan 2018, at 16:42, Edwin Dijkstra <e.r.dijkstra(a)ziggo.nl <mailto:e.r.dijkstra@ziggo.nl>> wrote: >>>>> Hi, >>>>> >>>>> >>>>> I’m pretty new on ObserviumJ and could use some help: Added my Synology NAS. Want to monitor also the Network interface, but the only port I see is the loopback IF… >>>>> >>>>> >>>>> Thanks in advance. >>>>> >>>>> >>>>> Regards, >>>>> >>>>> >>>>> Edwin >>>>> >>>>> observium mailing list >>>>> observium(a)observium.org <mailto:observium@observium.org> >>>>> http://postman.memetic.org/cgi-bin/mailman/listinfo/observium <http://postman.memetic.org/cgi-bin/mailman/listinfo/observium> >>>> >>>> >>>> >>>> _______________________________________________ >>>> observium mailing list >>>> observium(a)observium.org <mailto:observium@observium.org> >>>> http://postman.memetic.org/cgi-bin/mailman/listinfo/observium <http://postman.memetic.org/cgi-bin/mailman/listinfo/observium> > _______________________________________________ > observium mailing list > observium(a)observium.org <mailto:observium@observium.org> > http://postman.memetic.org/cgi-bin/mailman/listinfo/observium <http://postman.memetic.org/cgi-bin/mailman/listinfo/observium>

2 1

Re: [Observium] Missing ethernet port when monitoring Synology NAS
by Tom Laermans 11 Jan '18

11 Jan '18

Looks like ifAlias isn't being returned. The INSERT passes '' to be inserted, which defaults to 0, but can only work for the first interface a device has... Tom On 01/11/2018 05:03 PM, Edwin Dijkstra wrote: > > Ran the discovery, part of the output: > > o Discovering ports . > > SQL[INSERT INTO `ports` > (`device_id`,`ifIndex`,`ifAlias`,`ifDescr`,`ifName`,`ifType`) VALUES > ('5','2','','eth0','eth0','ethernetCsmacd')] > > SQL RUNTIME[0.00110412s] > > ERROR[Error in query: (Duplicate entry '0' for key 'PRIMARY') 1062] > > SQL[SELECT * FROM `ports` WHERE `device_id` = '5' AND `ifIndex` = '2'] > > SQL RUNTIME[0.00229788s] > > eth0(2)[] > > SQL[INSERT INTO `ports` > (`device_id`,`ifIndex`,`ifAlias`,`ifDescr`,`ifName`,`ifType`) VALUES > ('5','3','','sit0','sit0','tunnel')] > > SQL RUNTIME[0.00102282s] > > ERROR[Error in query: (Duplicate entry '0' for key 'PRIMARY') 1062] > > A database issue? > > Regards, > > Edwin > > *From:*observium [mailto:observium-bounces@observium.org] *On Behalf > Of *Adam Armstrong > *Sent:* Wednesday, January 10, 2018 10:48 PM > *To:* observium(a)observium.org > *Subject:* Re: [Observium] Missing ethernet port when monitoring > Synology NAS > > ./discovery.php -h <hostname> -m ports -d > > adam. > > Adam Armstrong > > Managing Director & Lead Architect > > Observium Limited > > http://www.observium.org > > http://docs.observium.org > > http://jira.observium.org > > On 2018-01-10 16:06:16, Edwin Dijkstra <e.r.dijkstra(a)ziggo.nl > <mailto:e.r.dijkstra@ziggo.nl>> wrote: > > That’s what I thought;) > > When I scan the device using a simple SNMP tester, 3 IF’s are found: > > Found standard interfaces: > > 1:lo: (001) lo Traffic,Connected,10 MBit/s,Software Loopback,lo, > 64 Bit > > 2:eth0: (002) eth0 Traffic,Connected,1 GBit/s,Ethernet,eth0, 64 Bit > > 3:sit0: (003) sit0 Traffic,Not Connected,,Tunnel,sit0, 64 Bit > > Testing standard interfaces... > > 1/10/2018 4:41:48 PM (861 ms) : SNMP Datatype: ASN_APP_COUNTER64 > > 1/10/2018 4:41:48 PM (865 ms) : SNMP Datatype: ASN_APP_COUNTER64 > > Test 1:lo (1.3.6.1.2.1.31.1.1.1.6.1,1.3.6.1.2.1.31.1.1.1.10.1): > in=1891611 out=1891611 > > 1/10/2018 4:41:48 PM (871 ms) : SNMP Datatype: ASN_APP_COUNTER64 > > 1/10/2018 4:41:48 PM (877 ms) : SNMP Datatype: ASN_APP_COUNTER64 > > Test 2:eth0 (1.3.6.1.2.1.31.1.1.1.6.2,1.3.6.1.2.1.31.1.1.1.10.2): > in=92965523517 out=2582822450 > > 1/10/2018 4:41:48 PM (884 ms) : SNMP Datatype: ASN_APP_COUNTER64 > > 1/10/2018 4:41:48 PM (887 ms) : SNMP Datatype: ASN_APP_COUNTER64 > > Test 3:sit0 (1.3.6.1.2.1.31.1.1.1.6.3,1.3.6.1.2.1.31.1.1.1.10.3): > in=0 out=0 > > In Observium I only see the lo IF: > > Regards, > > Regards, > > Edwin > > *From:*observium [mailto:observium-bounces@observium.org] *On > Behalf Of *Adam Armstrong > *Sent:* Wednesday, January 10, 2018 4:26 PM > *To:* 'Observium' > *Cc:* 'Observium' > *Subject:* Re: [Observium] Missing ethernet port when monitoring > Synology NAS > > Monitoring interfaces is about as industry standard as it gets. If > we're not picking up a port, it's because your device is bizarrely > not exposing it. > > Have you tried walking the ifTable and seeing if it's present? > > Adam. > > Sent from BlueMail <http://www.bluemail.me/r?b=11687> > > On 9 Jan 2018, at 16:42, Edwin Dijkstra <e.r.dijkstra(a)ziggo.nl > <mailto:e.r.dijkstra@ziggo.nl>> wrote: > > Hi, > > I’m pretty new on ObserviumJand could use some help: Added my > Synology NAS. Want to monitor also the Network interface, but the > only port I see is the loopback IF… > > Thanks in advance. > > Regards, > > Edwin > > ------------------------------------------------------------------------ > > observium mailing list observium(a)observium.org > <mailto:observium@observium.org> > http://postman.memetic.org/cgi-bin/mailman/listinfo/observium > > > > _______________________________________________ > observium mailing list > observium(a)observium.org > http://postman.memetic.org/cgi-bin/mailman/listinfo/observium

4 3

Re: [Observium] Missing ethernet port when monitoring Synology NAS
by Adam Armstrong 11 Jan '18

11 Jan '18

./discovery.php -h <hostname> -m ports -d adam. Adam Armstrong Managing Director & Lead Architect Observium Limited http://www.observium.org http://docs.observium.org http://jira.observium.org On 2018-01-10 16:06:16, Edwin Dijkstra <e.r.dijkstra(a)ziggo.nl> wrote: That’s what I thought;) When I scan the device using a simple SNMP tester, 3 IF’s are found: Found standard interfaces: 1:lo: (001) lo Traffic,Connected,10 MBit/s,Software Loopback,lo, 64 Bit 2:eth0: (002) eth0 Traffic,Connected,1 GBit/s,Ethernet,eth0, 64 Bit 3:sit0: (003) sit0 Traffic,Not Connected,,Tunnel,sit0, 64 Bit Testing standard interfaces... 1/10/2018 4:41:48 PM (861 ms) : SNMP Datatype: ASN_APP_COUNTER64 1/10/2018 4:41:48 PM (865 ms) : SNMP Datatype: ASN_APP_COUNTER64 Test 1:lo (1.3.6.1.2.1.31.1.1.1.6.1,1.3.6.1.2.1.31.1.1.1.10.1): in=1891611 out=1891611 1/10/2018 4:41:48 PM (871 ms) : SNMP Datatype: ASN_APP_COUNTER64 1/10/2018 4:41:48 PM (877 ms) : SNMP Datatype: ASN_APP_COUNTER64 Test 2:eth0 (1.3.6.1.2.1.31.1.1.1.6.2,1.3.6.1.2.1.31.1.1.1.10.2): in=92965523517 out=2582822450 1/10/2018 4:41:48 PM (884 ms) : SNMP Datatype: ASN_APP_COUNTER64 1/10/2018 4:41:48 PM (887 ms) : SNMP Datatype: ASN_APP_COUNTER64 Test 3:sit0 (1.3.6.1.2.1.31.1.1.1.6.3,1.3.6.1.2.1.31.1.1.1.10.3): in=0 out=0 In Observium I only see the lo IF: Regards, Regards, Edwin From: observium [mailto:observium-bounces@observium.org] On Behalf Of Adam Armstrong Sent: Wednesday, January 10, 2018 4:26 PM To: 'Observium' Cc: 'Observium' Subject: Re: [Observium] Missing ethernet port when monitoring Synology NAS Monitoring interfaces is about as industry standard as it gets. If we're not picking up a port, it's because your device is bizarrely not exposing it. Have you tried walking the ifTable and seeing if it's present? Adam. Sent from BlueMail [http://www.bluemail.me/r?b=11687] On 9 Jan 2018, at 16:42, Edwin Dijkstra <e.r.dijkstra(a)ziggo.nl [mailto:e.r.dijkstra@ziggo.nl]> wrote: Hi, I’m pretty new on ObserviumJ and could use some help: Added my Synology NAS. Want to monitor also the Network interface, but the only port I see is the loopback IF… Thanks in advance. Regards, Edwin observium mailing list observium(a)observium.org [mailto:observium@observium.org] http://postman.memetic.org/cgi-bin/mailman/listinfo/observium [http://postman.memetic.org/cgi-bin/mailman/listinfo/observium]

2 1

Polling/alerts
by Hermes J. Martinez 11 Jan '18

11 Jan '18

Hello everyone, I am new to Observium and I have a question, can someone explain to me how the polling works? And the email alerts are sent when the device is down/up(Recover) or when the polling time is met? For example: In the next image I have two cases at 9:37am I received the email for the alert and for the recovery (this is normal or I need to check somethings in the config?) Thank you! kind Regards Hermes J. Martinez Sistemas corporativo <mailto:hermes.martinez@pueblobonito.com.mx> hermes.martinez(a)pueblobonito.com.mx (669) 989-8900 | EXT 8656 (669) 120-8470 <http://www.pueblobonito.com/> www.pueblobonito.com.mx <http://www.pueblobonito.com/real-escape> Read about the Real Escape at Pueblo Bonito Connect with us <https://twitter.com/PuebloBonito> <https://plus.google.com/103008660176547960870/about> <https://www.facebook.com/PuebloBonitoResort> <https://www.instagram.com/pueblobonito/> <http://www.pueblobonito.com/blog/> Do you really need to print this e-mail? En realidad necesita imprimir este correo? Aviso Legal / Legal Notice http://img.pueblobonito.com.mx/legal

2 2

Consultant help?
by Ben Filippelli 11 Jan '18

11 Jan '18

Is there any gurus out there willing to work with me on setting up some remote monitoring and alerts on observium Sent from Nine<http://www.9folders.com/>

7 15

stopping queued alerts
by Edvinas K 10 Jan '18

10 Jan '18

Hello, Recently we had a case when network infrastructure went down, and only after some time we fixed it. Observium noticed it and everything was OK. But in meantime of fixing it - Observium started to flood with alerts - this may be the correct case. But after we repaired the network - and everything was OK, we still had a flood of old errors and it continued about an hour or so. I tried to disable email alerts through config.php, supress all alerts through WEB interface - but nothing helped. So is there any manual way to stop the Alerting queue ? Thanks

3 3

Re: [Observium] Missing ethernet port when monitoring Synology NAS
by Adam Armstrong 10 Jan '18

10 Jan '18

Monitoring interfaces is about as industry standard as it gets. If we're not picking up a port, it's because your device is bizarrely not exposing it. Have you tried walking the ifTable and seeing if it's present? Adam. ⁣Sent from BlueMail On 9 Jan 2018, 16:42, at 16:42, Edwin Dijkstra <e.r.dijkstra(a)ziggo.nl> wrote: >Hi, > > > >I'm pretty new on ObserviumJ and could use some help: Added my Synology >NAS. >Want to monitor also the Network interface, but the only port I see is >the >loopback IF. > > > >Thanks in advance. > > > >Regards, > > > >Edwin > > > >------------------------------------------------------------------------ > >_______________________________________________ >observium mailing list >observium(a)observium.org >http://postman.memetic.org/cgi-bin/mailman/listinfo/observium

2 1

Adjust values returned for custom OID
by Vater, Wolfgang 10 Jan '18

10 Jan '18

Hi, I collect temperature data through a custom OID The value returned is 236. That is 23.6 °C Is there a way to have Observium display this with one decimal point? Wolfgang Vater | Lead Client Architect | Enterprise Services Unisys Deutschland GmbH | +49 162 255 9338 | wolfgang.vater(a)unisys.com | Philipp-Reis-Str. 2 | 65795 Hattersheim <http://www.unisys.com/> Unisys Deutschland GmbH | Geschäftsführer: Sandro Lindner & Dr. Uwe Heckert | Sitz der Gesellschaft: Hattersheim | Amtsgericht: Frankfurt/Main HRB 7929 THIS COMMUNICATION MAY CONTAIN CONFIDENTIAL AND/OR OTHERWISE PROPRIETARY MATERIAL and is thus for use only by the intended recipient. If you received this in error, please contact the sender and delete the e-mail and its attachments from all computers. DIESE E-MAIL IST AUSSCHLIESSLICH FÜR DEN ADRESSATEN BESTIMMT UND KANN VERTRAULICHE INFORMATIONEN ENTHALTEN. Sollten Sie nicht der Adressat dieser Informationen sein, bitten wir Sie, sich mit dem Absender in Verbindung zu setzen und die Informationen von Ihren Endgeräten zu entfernen. <http://www.linkedin.com/company/unisys> <http://twitter.com/unisyscorp> <https://plus.google.com/+UnisysCorp/posts> <http://www.youtube.com/theunisyschannel> <http://www.facebook.com/unisyscorp> <https://vimeo.com/unisys> <http://blogs.unisys.com/>

5 6

exclude or skip wildcard match for poller and discovery
by Richard Wigzell 10 Jan '18

10 Jan '18

Hello, We are currently running Pro r8993 with 650+ devices and will be adding another 400 or so shortly, to support this we will try a deployment as described in some detail by Markus: http://blog.best-practice.se/2017/10/scaling-observium-horizontally.html We do however also have another edge case to deal with in the form of an infrastructure that we cannot look into but can send out of, the inhibitor is political and not technical. We are halfway to solving it technically however by using a poller remotely with wildcard host name matching as the 'remote' stuff has a common domain part. Our other 'normal' pollers however need to be told to exclude or skip polling / discovery of the remote devices. Can a wildcard skip or exclude be added to the poller-wrapper script for this purpose? Picture attached for reference. Regards [cid:image001.jpg@01CE9215.D39244B0]<https://www.it.ox.ac.uk/> Richard Wigzell Technical Lead, Storage Platforms IT Services | University of Oxford 13 Banbury Road, Oxford OX2 6NN T: 01865 616282 www.it.ox.ac.uk<https://www.it.ox.ac.uk/>

3 3

graphs
by Arnoldo Vidal Bravo 10 Jan '18

10 Jan '18

Hi, We are using Observium SE Version Information *Observium* 17.11.8960 (29th November 2017) *OS* Linux 2.6.32-696.16.1.el6.x86_64 [amd64] (CentOS 6.9) *Apache* 2.2.15 (CentOS) *PHP* 7.0.24 (OPcache: ENABLED) *Python* 2.6.6 *MySQL* 5.1.73 (extension: mysqli 5.1.73) *SNMP* NET-SNMP 5.5 *RRDtool* 1.6.0 We have a server (Mysql+rrd+apache) and 419 devices monitored, but not showas the graphs, it says NAN. There any reason for this? Cron job is setup # Run multithreaded poller wrapper every 5 minutes */5 * * * * root /opt/observium/poller-wrapper.py >> /dev/null 2>&1 -- Saluda cordialmente

3 5

Alert Checker
by Jacek.Dabrowski＠selgros.pl 10 Jan '18

10 Jan '18

Hi, Is there plans to add more extension in severity ??? It's good that it should be for example: Warning, Alert, Informational etc. Pozdrawiam Jacek Dąbrowski Koordynator Administratorów IT [cid:image002.jpg@01D38A2D.221DDC20] Transgourmet Polska Sp. z o.o. Zamenhofa 133, 61-131 Poznań, Polska tel.: +48 61 87 42 017 kom.:+48 604 069 933 E-mail: Jacek.Dabrowski(a)selgros.pl www.selgros.pl<http://www.selgros.pl> www.selgros24.pl<http://www.selgros24.pl> www.transgourmet.pl<http://www.transgourmet.pl> Transgourmet Polska Sp. z o.o. jest zarejestrowana w Sądzie Rejonowym Poznań-Nowe Miasto i Wilda w Poznaniu, Wydział VIII Gospodarczy Krajowego Rejestru Sądowego pod nr KRS: 0000045597. NIP: PL 781-10-11-998, REGON 630375413. Wysokość kapitału zakładowego: 310.000.000,00 złotych. Zapraszamy do korzystania z aplikacji HELPDESK<https://horologium>

1 0

error: maximum authentication attempts exceeded for root from 127.0.0.1
by Timothy Illguth 10 Jan '18

10 Jan '18

Hello Observium, Just curious about what this means: Jan 7 06:51:40 mon sshd[4607]: error: maximum authentication attempts exceeded for root from 127.0.0.1 port 57494 ssh2 [preauth] Jan 7 06:51:40 mon sshd[4613]: error: maximum authentication attempts exceeded for root from 127.0.0.1 port 57496 ssh2 [preauth] Jan 7 12:53:13 mon sshd[2300]: error: maximum authentication attempts exceeded for root from 127.0.0.1 port 60920 ssh2 [preauth] Jan 7 12:53:13 mon sshd[2306]: error: maximum authentication attempts exceeded for root from 127.0.0.1 port 60922 ssh2 [preauth] Jan 7 18:33:51 mon sshd[18311]: error: maximum authentication attempts exceeded for root from 127.0.0.1 port 34286 ssh2 [preauth] Jan 7 18:33:51 mon sshd[18317]: error: maximum authentication attempts exceeded for root from 127.0.0.1 port 34288 ssh2 [preauth] Jan 8 00:52:20 mon sshd[30357]: error: maximum authentication attempts exceeded for root from 127.0.0.1 port 39526 ssh2 [preauth] Jan 8 00:52:20 mon sshd[30363]: error: maximum authentication attempts exceeded for root from 127.0.0.1 port 39528 ssh2 [preauth] Jan 8 06:51:43 mon sshd[350]: error: maximum authentication attempts exceeded for root from 127.0.0.1 port 43064 ssh2 [preauth] Jan 8 06:51:43 mon sshd[362]: error: maximum authentication attempts exceeded for root from 127.0.0.1 port 43066 ssh2 [preauth] Jan 8 12:54:53 mon sshd[9955]: error: maximum authentication attempts exceeded for root from 127.0.0.1 port 46520 ssh2 [preauth] Jan 8 12:54:54 mon sshd[9961]: error: maximum authentication attempts exceeded for root from 127.0.0.1 port 46522 ssh2 [preauth] Jan 8 18:34:40 mon sshd[22397]: error: maximum authentication attempts exceeded for root from 127.0.0.1 port 48052 ssh2 [preauth] Jan 8 18:34:40 mon sshd[22403]: error: maximum authentication attempts exceeded for root from 127.0.0.1 port 48054 ssh2 [preauth] Jan 9 00:33:45 mon sshd[26212]: error: maximum authentication attempts exceeded for root from 127.0.0.1 port 51466 ssh2 [preauth] Jan 9 00:33:45 mon sshd[26218]: error: maximum authentication attempts exceeded for root from 127.0.0.1 port 51468 ssh2 [preauth] Jan 9 06:52:49 mon sshd[17401]: error: maximum authentication attempts exceeded for root from 127.0.0.1 port 56818 ssh2 [preauth] Jan 9 06:52:49 mon sshd[17407]: error: maximum authentication attempts exceeded for root from 127.0.0.1 port 56820 ssh2 [preauth] We lost all monitoring about this time, is it possibly related? -- ___________________________ Tim Illguth Jr. Systems Administrator Alaska Satellite Facility (907) 474-7924

3 2

Missing ethernet port when monitoring Synology NAS
by Edwin Dijkstra 09 Jan '18

09 Jan '18

Hi, I'm pretty new on ObserviumJ and could use some help: Added my Synology NAS. Want to monitor also the Network interface, but the only port I see is the loopback IF. Thanks in advance. Regards, Edwin

1 0

Missing EngineID
by Alberto Busso 09 Jan '18

09 Jan '18

Hi all, I am a new user of observium and I am doing some tests with few devices before deploying it on a wider network. When I try to add my first device (with -d option), it only partially works. In the log I have only this error: CMD[/usr/bin/snmpget -v2c -c *** -Pu -OQv -m SNMP-FRAMEWORK-MIB -M /opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp 'udp':'172.16.192.102':'161' snmpEngineID.0] CMD EXITCODE[0] CMD RUNTIME[0.0324s] CMD EXITDELAY[10ms] STDOUT[ No Such Object available on this agent at this OID ] SNMP STATUS[FALSE] SNMP ERROR[#1000 - Failed response] So, it seems I am not getting the EngineID object. Then at the end of the log I have this: SQL[INSERT INTO `devices` (`hostname`,`sysName`,`status`,`snmp_community`,`snmp_port`,`snmp_transport`,`snmp_version`,`os`,`snmpEngineID`,`location`,`sysContact`) VALUES ('172.16.192.102','Terlapini RB Sottotetto','1','public','161','udp','v2c','routeros','','Gussago','Elsy')] SQL RUNTIME[0.04079700s] Devices failed: 1. So, it seems that the script will try to add the device but with an empty EngineID field. The result is that the device is added (e.g. I can see it in the device when accessing e.g. via web interface, but when I click on it, it does not show up in the list with a reply that there are no devices matching the search criterias). I also noticed that if I try to add a second device with same EngineID problem, the SQL INSERT will fail with ' duplicate key' error. I have the impression that the EngineID is used as a unique key in the SQL DB and if it is empty this may cause problems. Am I right? In this case, I have to understand why I cannot get the EngineID from the device. Tnx Alberto

2 3

group_id match in Alerts
by Richard Wigzell 09 Jan '18

09 Jan '18

Hello is it possible to match a group of devices in the Alert/Group code from another group as below? [cid:image001.png@01D388CF.02293860] Regards [cid:image001.jpg@01CE9215.D39244B0]<https://www.it.ox.ac.uk/> Richard Wigzell Technical Lead, Storage Platforms IT Services | University of Oxford 13 Banbury Road, Oxford OX2 6NN T: 01865 616282 www.it.ox.ac.uk<https://www.it.ox.ac.uk/>

2 2

Re: [Observium] inventory for linux
by Patricio Hernan Besteiro 09 Jan '18

09 Jan '18

Hi Guys, I'm not getting any info about serial numbers on "inventory" from linux boxes, is that feature only for networking devices? thanks tons! Kind regards, Patricio Hernan Besteiro Unix Systems Administrator IBM Client Innovation Center - Buenos Aires - Argentina E-mail: besteiro(a)ar.ibm.com

2 1

Invoices
by Andrew Lemin 09 Jan '18

09 Jan '18

Hi, After we have paid for the subscription, how can we access the traditional invoice for passing to accounts? We have received the email to say the payment has been taken, but need an invoice etc. Thanks, Andy.

3 4

Graphing BIND with multiple views?
by Stephen Fulton 07 Jan '18

07 Jan '18

Hi all, I'm trying to graph BIND stats, which the normal method works well, but in this case the recursive-only server has multiple views configured and the stats returned by RNDC are broken into categories based on views. The Observium "Server Statistics" page looks accurate, but the Resolving and Queries page have almost data recorded (some data in "Errors" and "Incoming Queries" respectively, but not complete in either section). Has anyone dealt with this before? Thanks, -- Stephen

2 3

Re: [Observium] Migration Observium to another IP
by Jacek.Dabrowski＠selgros.pl 05 Jan '18

05 Jan '18

Helps: SELINUX=disabled Pozdrawiam Jacek Dąbrowski Koordynator Administratorów IT [cid:image003.jpg@01D3862A.7D1EDF40] Transgourmet Polska Sp. z o.o. Zamenhofa 133, 61-131 Poznań, Polska tel.: +48 61 87 42 017 kom.:+48 604 069 933 E-mail: Jacek.Dabrowski(a)selgros.pl www.selgros.pl<http://www.selgros.pl> www.selgros24.pl<http://www.selgros24.pl> www.transgourmet.pl<http://www.transgourmet.pl> Transgourmet Polska Sp. z o.o. jest zarejestrowana w Sądzie Rejonowym Poznań-Nowe Miasto i Wilda w Poznaniu, Wydział VIII Gospodarczy Krajowego Rejestru Sądowego pod nr KRS: 0000045597. NIP: PL 781-10-11-998, REGON 630375413. Wysokość kapitału zakładowego: 310.000.000,00 złotych. Zapraszamy do korzystania z aplikacji HELPDESK<https://horologium> From: Dąbrowski Jacek Sent: Friday, January 5, 2018 1:12 PM To: 'Observium' <observium(a)observium.org> Subject: Migration Observium to another IP Hello, I changed the IP address of the Observium server (Centos installation) to another. After reboot I cannot start httpd, can I ask for some hint? [root@observium2 ~]# journalctl -xe -- Defined-By: systemd -- Support: http://lists.freedesktop.org/mailman/listinfo/systemd-devel -- -- Unit session-31.scope has finished starting up. -- -- The start-up result is done. Jan 05 13:00:02 observium2.poznan.zvni.com systemd[1]: Starting Session 31 of user root. -- Subject: Unit session-31.scope has begun start-up -- Defined-By: systemd -- Support: http://lists.freedesktop.org/mailman/listinfo/systemd-devel -- -- Unit session-31.scope has begun starting up. Jan 05 13:00:02 observium2.poznan.zvni.com CROND[32599]: (root) CMD ( /opt/observium/discovery.php -h new >> /dev/null 2>&1) Jan 05 13:00:02 observium2.poznan.zvni.com CROND[32600]: (root) CMD ( /opt/observium/poller-wrapper.py 30 >> /dev/null 2>&1) Jan 05 13:00:28 observium2.poznan.zvni.com sudo[2577]: root : TTY=pts/0 ; PWD=/root ; USER=root ; COMMAND=/bin/systemctl start httpd.service Jan 05 13:00:28 observium2.poznan.zvni.com polkitd[667]: Registered Authentication Agent for unix-process:2578:376075 (system bus name :1.91 [/usr/bin/pkttyagent --notify-fd 5 --fallback], object path /org/freedesktop/PolicyKit1/AuthenticationAgent, loc Jan 05 13:00:28 observium2.poznan.zvni.com systemd[1]: Starting The Apache HTTP Server... -- Subject: Unit httpd.service has begun start-up -- Defined-By: systemd -- Support: http://lists.freedesktop.org/mailman/listinfo/systemd-devel -- -- Unit httpd.service has begun starting up. Jan 05 13:00:28 observium2.poznan.zvni.com systemd[1]: httpd.service: main process exited, code=exited, status=1/FAILURE Jan 05 13:00:28 observium2.poznan.zvni.com kill[2586]: kill: cannot find process "" Jan 05 13:00:28 observium2.poznan.zvni.com systemd[1]: httpd.service: control process exited, code=exited status=1 Jan 05 13:00:28 observium2.poznan.zvni.com systemd[1]: Failed to start The Apache HTTP Server. -- Subject: Unit httpd.service has failed -- Defined-By: systemd -- Support: http://lists.freedesktop.org/mailman/listinfo/systemd-devel -- -- Unit httpd.service has failed. -- -- The result is failed. Jan 05 13:00:28 observium2.poznan.zvni.com systemd[1]: Unit httpd.service entered failed state. Jan 05 13:00:28 observium2.poznan.zvni.com systemd[1]: httpd.service failed. Jan 05 13:00:28 observium2.poznan.zvni.com polkitd[667]: Unregistered Authentication Agent for unix-process:2578:376075 (system bus name :1.91, object path /org/freedesktop/PolicyKit1/AuthenticationAgent, locale en_US.UTF-8) (disconnected from bus) Jan 05 13:01:01 observium2.poznan.zvni.com systemd[1]: Started Session 32 of user root. -- Subject: Unit session-32.scope has finished start-up -- Defined-By: systemd -- Support: http://lists.freedesktop.org/mailman/listinfo/systemd-devel -- -- Unit session-32.scope has finished starting up. -- -- The start-up result is done. Jan 05 13:01:01 observium2.poznan.zvni.com systemd[1]: Starting Session 32 of user root. -- Subject: Unit session-32.scope has begun start-up -- Defined-By: systemd -- Support: http://lists.freedesktop.org/mailman/listinfo/systemd-devel -- -- Unit session-32.scope has begun starting up. Jan 05 13:01:01 observium2.poznan.zvni.com CROND[2593]: (root) CMD (run-parts /etc/cron.hourly) Jan 05 13:01:01 observium2.poznan.zvni.com run-parts(/etc/cron.hourly)[2596]: starting 0anacron Jan 05 13:01:01 observium2.poznan.zvni.com run-parts(/etc/cron.hourly)[2602]: finished 0anacron Jan 05 13:01:54 observium2.poznan.zvni.com sudo[2604]: root : TTY=pts/0 ; PWD=/root ; USER=root ; COMMAND=/bin/systemctl restart httpd.service Jan 05 13:01:54 observium2.poznan.zvni.com polkitd[667]: Registered Authentication Agent for unix-process:2605:384632 (system bus name :1.94 [/usr/bin/pkttyagent --notify-fd 5 --fallback], object path /org/freedesktop/PolicyKit1/AuthenticationAgent, loc Jan 05 13:01:54 observium2.poznan.zvni.com systemd[1]: Starting The Apache HTTP Server... -- Subject: Unit httpd.service has begun start-up -- Defined-By: systemd -- Support: http://lists.freedesktop.org/mailman/listinfo/systemd-devel -- -- Unit httpd.service has begun starting up. Jan 05 13:01:54 observium2.poznan.zvni.com systemd[1]: httpd.service: main process exited, code=exited, status=1/FAILURE Jan 05 13:01:54 observium2.poznan.zvni.com kill[2612]: kill: cannot find process "" Jan 05 13:01:54 observium2.poznan.zvni.com systemd[1]: httpd.service: control process exited, code=exited status=1 Jan 05 13:01:54 observium2.poznan.zvni.com systemd[1]: Failed to start The Apache HTTP Server. -- Subject: Unit httpd.service has failed -- Defined-By: systemd -- Support: http://lists.freedesktop.org/mailman/listinfo/systemd-devel -- -- Unit httpd.service has failed. Pozdrawiam Jacek Dąbrowski Koordynator Administratorów IT [cid:image004.jpg@01D3862A.7D1EDF40] Transgourmet Polska Sp. z o.o. Zamenhofa 133, 61-131 Poznań, Polska tel.: +48 61 87 42 017 kom.:+48 604 069 933 E-mail: Jacek.Dabrowski(a)selgros.pl<mailto:Jacek.Dabrowski@selgros.pl> www.selgros.pl<http://www.selgros.pl> www.selgros24.pl<http://www.selgros24.pl> www.transgourmet.pl<http://www.transgourmet.pl> Transgourmet Polska Sp. z o.o. jest zarejestrowana w Sądzie Rejonowym Poznań-Nowe Miasto i Wilda w Poznaniu, Wydział VIII Gospodarczy Krajowego Rejestru Sądowego pod nr KRS: 0000045597. NIP: PL 781-10-11-998, REGON 630375413. Wysokość kapitału zakładowego: 310.000.000,00 złotych. Zapraszamy do korzystania z aplikacji HELPDESK<https://horologium>

1 0

Migration Observium to another IP
by Jacek.Dabrowski＠selgros.pl 05 Jan '18

05 Jan '18

Hello, I changed the IP address of the Observium server (Centos installation) to another. After reboot I cannot start httpd, can I ask for some hint? [root@observium2 ~]# journalctl -xe -- Defined-By: systemd -- Support: http://lists.freedesktop.org/mailman/listinfo/systemd-devel -- -- Unit session-31.scope has finished starting up. -- -- The start-up result is done. Jan 05 13:00:02 observium2.poznan.zvni.com systemd[1]: Starting Session 31 of user root. -- Subject: Unit session-31.scope has begun start-up -- Defined-By: systemd -- Support: http://lists.freedesktop.org/mailman/listinfo/systemd-devel -- -- Unit session-31.scope has begun starting up. Jan 05 13:00:02 observium2.poznan.zvni.com CROND[32599]: (root) CMD ( /opt/observium/discovery.php -h new >> /dev/null 2>&1) Jan 05 13:00:02 observium2.poznan.zvni.com CROND[32600]: (root) CMD ( /opt/observium/poller-wrapper.py 30 >> /dev/null 2>&1) Jan 05 13:00:28 observium2.poznan.zvni.com sudo[2577]: root : TTY=pts/0 ; PWD=/root ; USER=root ; COMMAND=/bin/systemctl start httpd.service Jan 05 13:00:28 observium2.poznan.zvni.com polkitd[667]: Registered Authentication Agent for unix-process:2578:376075 (system bus name :1.91 [/usr/bin/pkttyagent --notify-fd 5 --fallback], object path /org/freedesktop/PolicyKit1/AuthenticationAgent, loc Jan 05 13:00:28 observium2.poznan.zvni.com systemd[1]: Starting The Apache HTTP Server... -- Subject: Unit httpd.service has begun start-up -- Defined-By: systemd -- Support: http://lists.freedesktop.org/mailman/listinfo/systemd-devel -- -- Unit httpd.service has begun starting up. Jan 05 13:00:28 observium2.poznan.zvni.com systemd[1]: httpd.service: main process exited, code=exited, status=1/FAILURE Jan 05 13:00:28 observium2.poznan.zvni.com kill[2586]: kill: cannot find process "" Jan 05 13:00:28 observium2.poznan.zvni.com systemd[1]: httpd.service: control process exited, code=exited status=1 Jan 05 13:00:28 observium2.poznan.zvni.com systemd[1]: Failed to start The Apache HTTP Server. -- Subject: Unit httpd.service has failed -- Defined-By: systemd -- Support: http://lists.freedesktop.org/mailman/listinfo/systemd-devel -- -- Unit httpd.service has failed. -- -- The result is failed. Jan 05 13:00:28 observium2.poznan.zvni.com systemd[1]: Unit httpd.service entered failed state. Jan 05 13:00:28 observium2.poznan.zvni.com systemd[1]: httpd.service failed. Jan 05 13:00:28 observium2.poznan.zvni.com polkitd[667]: Unregistered Authentication Agent for unix-process:2578:376075 (system bus name :1.91, object path /org/freedesktop/PolicyKit1/AuthenticationAgent, locale en_US.UTF-8) (disconnected from bus) Jan 05 13:01:01 observium2.poznan.zvni.com systemd[1]: Started Session 32 of user root. -- Subject: Unit session-32.scope has finished start-up -- Defined-By: systemd -- Support: http://lists.freedesktop.org/mailman/listinfo/systemd-devel -- -- Unit session-32.scope has finished starting up. -- -- The start-up result is done. Jan 05 13:01:01 observium2.poznan.zvni.com systemd[1]: Starting Session 32 of user root. -- Subject: Unit session-32.scope has begun start-up -- Defined-By: systemd -- Support: http://lists.freedesktop.org/mailman/listinfo/systemd-devel -- -- Unit session-32.scope has begun starting up. Jan 05 13:01:01 observium2.poznan.zvni.com CROND[2593]: (root) CMD (run-parts /etc/cron.hourly) Jan 05 13:01:01 observium2.poznan.zvni.com run-parts(/etc/cron.hourly)[2596]: starting 0anacron Jan 05 13:01:01 observium2.poznan.zvni.com run-parts(/etc/cron.hourly)[2602]: finished 0anacron Jan 05 13:01:54 observium2.poznan.zvni.com sudo[2604]: root : TTY=pts/0 ; PWD=/root ; USER=root ; COMMAND=/bin/systemctl restart httpd.service Jan 05 13:01:54 observium2.poznan.zvni.com polkitd[667]: Registered Authentication Agent for unix-process:2605:384632 (system bus name :1.94 [/usr/bin/pkttyagent --notify-fd 5 --fallback], object path /org/freedesktop/PolicyKit1/AuthenticationAgent, loc Jan 05 13:01:54 observium2.poznan.zvni.com systemd[1]: Starting The Apache HTTP Server... -- Subject: Unit httpd.service has begun start-up -- Defined-By: systemd -- Support: http://lists.freedesktop.org/mailman/listinfo/systemd-devel -- -- Unit httpd.service has begun starting up. Jan 05 13:01:54 observium2.poznan.zvni.com systemd[1]: httpd.service: main process exited, code=exited, status=1/FAILURE Jan 05 13:01:54 observium2.poznan.zvni.com kill[2612]: kill: cannot find process "" Jan 05 13:01:54 observium2.poznan.zvni.com systemd[1]: httpd.service: control process exited, code=exited status=1 Jan 05 13:01:54 observium2.poznan.zvni.com systemd[1]: Failed to start The Apache HTTP Server. -- Subject: Unit httpd.service has failed -- Defined-By: systemd -- Support: http://lists.freedesktop.org/mailman/listinfo/systemd-devel -- -- Unit httpd.service has failed. Pozdrawiam Jacek Dąbrowski Koordynator Administratorów IT [cid:image003.jpg@01D38626.BBCB2BD0] Transgourmet Polska Sp. z o.o. Zamenhofa 133, 61-131 Poznań, Polska tel.: +48 61 87 42 017 kom.:+48 604 069 933 E-mail: Jacek.Dabrowski(a)selgros.pl www.selgros.pl<http://www.selgros.pl> www.selgros24.pl<http://www.selgros24.pl> www.transgourmet.pl<http://www.transgourmet.pl> Transgourmet Polska Sp. z o.o. jest zarejestrowana w Sądzie Rejonowym Poznań-Nowe Miasto i Wilda w Poznaniu, Wydział VIII Gospodarczy Krajowego Rejestru Sądowego pod nr KRS: 0000045597. NIP: PL 781-10-11-998, REGON 630375413. Wysokość kapitału zakładowego: 310.000.000,00 złotych. Zapraszamy do korzystania z aplikacji HELPDESK<https://horologium>

1 0

Professional SVN updates failing
by Stephen Fulton 05 Jan '18

05 Jan '18

I have two separate instances of Observium Professional running at separate organizations and both have seen attempts to update using SVN fail over the last few days. user@host:/home/user# cd /opt/observium user@host:/opt/observium# svn update Updating '.': Authentication realm: <http://svn.observium.org:80> Observium Professional Repository Password for 'root': ^Csvn: E200015: Unable to connect to a repository at URL 'http://svn.observium.org/svn/observium/branches/stable' svn: E200015: The operation was interrupted user@host:/opt/observium# I do not believe either subscription has lapsed (the date for each is later in the year IIRC). Any ideas what is going on? -- Stephen

12 25

LDAP/AD nested groups
by Richard Wigzell 04 Jan '18

04 Jan '18

Hello, we are running Observium Pro with the following and nested AD group enumeration does not seem to be working. [cid:image002.png@01D3856C.B5B0A050] We have it enabled in the config.php but only Users in the top level groups specified in the config['auth_ldap_group'] array show up, if put a group with users into one of the groups in config['auth_ldap_group'] then nothing. Enabled in config with twice the depth needed. $config['auth_ldap_recursive'] = TRUE; $config['auth_ldap_recursive_maxdepth'] = 6; Any suggestions would be useful. [cid:image001.jpg@01CE9215.D39244B0]<https://www.it.ox.ac.uk/> Richard Wigzell Technical Lead, Storage Platforms IT Services | University of Oxford 13 Banbury Road, Oxford OX2 6NN T: 01865 616282 www.it.ox.ac.uk<https://www.it.ox.ac.uk/>

1 0

Re: [Observium] HSRP event tracking
by Pedersen, Sean 04 Jan '18

04 Jan '18

I don't believe there is an HSRP tracker. It's definitely not in the sensor entity type. Sensors are things like current, dBm, fan speed, power, state, temperature, voltage, etc. There's a list of known metrics and attributes here: http://www.observium.org/wiki/Alerting_Metrics_and_Attributes Examples of values can be found in your MySQL database. From: <Pedrosi>, "Derek G." <pedrosi(a)millercanfield.com<mailto:pedrosi@millercanfield.com>> Reply-To: "Observium Network Observation System (observium(a)observium.org<mailto:observium@observium.org>)" <observium(a)observium.org<mailto:observium@observium.org>> Date: Tuesday, November 18, 2014 at 12:14 PM To: "Observium Network Observation System (observium(a)observium.org<mailto:observium@observium.org>)" <observium(a)observium.org<mailto:observium@observium.org>> Subject: [Observium] HSRP event tracking Is there a way to add a checker for Cisco HSRP events? >From CISCO-HSRP-MIB... HsrpState ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "The current state of the HSRP protocol for a given HSRP group entry." SYNTAX INTEGER { initial(1), learn(2), listen(3), speak(4), standby(5), active(6) } This does not work... [cid:image003.jpg@01D0033A.077E5250] Regards, derek Subscriber v14.11.5987 Founded in 2007, IO is a worldwide leader in software defined data center technology, services and solutions that enable businesses and governments to intelligently control their information. The communication contained in this e-mail is confidential and is intended only for the named recipient(s) and may contain information that is privileged, proprietary, attorney work product or exempt from disclosure under applicable law. If you have received this message in error, or are not the named recipient(s), please note that any form of distribution, copying or use of this communication or the information in it is strictly prohibited and may be unlawful. Please immediately notify the sender of the error, and delete this communication including any attached files from your system. Thank you for your cooperation.

8 8

Re: [Observium] Observium data mapping
by Markus Klock 03 Jan '18

03 Jan '18

Some of the data is easy to pull via the API: http://docs.observium.org/api/ The database is not documented as far as I know /Markus Den 3 jan. 2018 13:26 skrev "Martin Davis" <martin(a)zarrdia.com>: Hi we are looking to pull various pieces of information from the underlying observium database with respect to the network components we are monitoring. Looking to find out if someone can point us in the right direction with respect to some documentation detailing the layout of the DB and commentary on the associated tables / fields, or a data dictionary. Kind regards, Martin. _______________________________________________ observium mailing list observium(a)observium.org http://postman.memetic.org/cgi-bin/mailman/listinfo/observium

1 0

Observium data mapping
by Martin Davis 03 Jan '18

03 Jan '18

Hi we are looking to pull various pieces of information from the underlying observium database with respect to the network components we are monitoring. Looking to find out if someone can point us in the right direction with respect to some documentation detailing the layout of the DB and commentary on the associated tables / fields, or a data dictionary. Kind regards, Martin.

1 0

Alerts on Aggregate values or sums?
by Darrell Budic 03 Jan '18

03 Jan '18

Bit of an RFE here, would like to be able to alert on the aggregate value for a group, or do sums in the alert checker test field, unless I’m just missing how to do this? My particular use check is adding up the total power for a 3 phase PDU (and a group for the power panel), and alerting if the total watts or amps are greater than 80% of the circuit capacity. Total Power Output on my APC 3 phase PDUs doesn’t work for me here because it’s dependent on the power factor of the connected devices, and that isn’t readily available in observium. Even if it was, I’d still need math (division this time) on two values. Sums/aggregates seem like the easiest route for this task. Thanks, -Darrell

2 1

multi device graph for sensors?
by Darrell Budic 03 Jan '18

03 Jan '18

Is there a way to get a summary (and sum) of a particular sensor? I’d like to have a one graph for all my PDUs with the apower attribute summed up for a total, see what the absolute # is. -Darrell

4 11

Alert chekers entites 'disapearing'
by Edvinas K 28 Dec '17

28 Dec '17

Hello, I've created alarm checker: os equals nxos hostname match *NET* ifType equals ethernetCsmacd ifAlias match *vPC Keep-alive link* And after a while i noticed that some entities where disapeared. The device was reachable and etc. I did a "rebuild' and they're reappeared again. What could be the cause ? NXOS ? :)

5 14

Re: [Observium] Collecting snmp traps with Observium
by Gustav Ulander 23 Dec '17

23 Dec '17

Hello. We would like to collect snmp traps from our routers and use them for alerting. However i cant find a way to do it? Has someone managed to get this to work? We are trying to get alerting to work with IS-IS neighbor up and down and so on. Best regards. //Gustav

3 5

false positive NX-OS alert ?
by Edvinas K 23 Dec '17

23 Dec '17

[image: Inline image 1] Hello, Is there any explanation - why this alert came up ? >From device sensors info now i see this information: [image: Inline image 2] The NX-OS stack (again) sent wrong condition information and alert generated by the "greater than 0" rule ? Is there are the way to minimaze these false positives ? Thank you.

2 2

HP J8992A Switch 6200yl-24G
by Fred Sharpsteen 22 Dec '17

22 Dec '17

We are using Observium to help support or local schools and we have a district that is using an HPJ8992A Switch 6200yl-24G, firmware K.15.16.0006. This switch is lacking many details in Observium the first and biggest one is the Port details. No Ports are showing on this switch.

4 6

LLDP huawei
by Jan Peters 21 Dec '17

21 Dec '17

Hi everybody, I'm testing observium community edition with our new huawei-switches: S5720-52X-PWR-SI-AC S6720-30C-EI-24S-AC CE6855-48T6Q-HI observium is working well, with a lot of informations! thx for that! But the LLDP will not shown in the port section. Is there a support for LLDP huawei switches in the pro-version of observium? Another question: http://postman.memetic.org/pipermail/observium/ The archive will not be displayed: You don't have permission to access /pipermail/observium/ on this server. Best regards Peter

1 0

accessing API and inventory API
by Edvinas K 21 Dec '17

21 Dec '17

Hello, We're using professional edition and started using API. I enabled basic API and Inventory API in config.php. But don't know how to access the Inventory API ? Didn't saw it in API instructions Page. Can you help ? Thank you.

2 2