- observium - lists.observium.org

Remove Switch Access interfaces from polling
by Massimo Cirulli 07 Feb '24

07 Feb '24

Hi All, I'm a newbie user of Observium. I need to clear the polling in order to not have the access port checked on the campus that we monitored. We have about 50k access interfaces splitted on Cisco and HP Aruba stack. I understand that i declare in config.php the bad iface but they have different name: Cisco -> Gi1/0/1 HP Aruba -> 45 My goal is: only the uplink will be checked. How can i use the config for access layer Cisco and Aruba stack (iface range) ? $config['bad_if'][] = " Gi1/0/1 ->?"; $config['bad_if'][] = "1->"; Thanx in advance for your support Massimo

1 0

Re: alert checker for specific ping probes
by Tony Guadagno 04 Feb '24

04 Feb '24

Observium support: can someone please address my question. Thanks Hi, I have a bunch of ping probes and I would like to write an alert for some (but not all). Since the hostname is the same for all, how can I differentiate between them in an alert checker...for example, I want to alert on this: [cid:image004.jpg@01DA55E7.8703CAF0] But not this: [cid:image005.jpg@01DA55E7.8703CAF0] thanks Tony Guadagno O +1 585 577 1003 C +1 585 703 6700 E tonyg(a)guadagnoconsulting.com<mailto:tonyg@guadagnoconsulting.com> [cid:image001.jpg@01D84DD6.FC9912E0]

3 4

regarding STP change alert
by Gurupad Deshmukh 27 Jan '24

27 Jan '24

Dear team, can we monitor stp change and broadcasting in cisco/huawei switches please help to configure STP change alert. regards, gurupad.

1 0

Re: observium Digest, Vol 162, Issue 17
by Chris Wopat 25 Jan '24

25 Jan '24

> > Date: Wed, 24 Jan 2024 15:41:29 -0700 > From: Brad Bendy <brad.bendy(a)gmail.com> > Subject: [Observium] FEC errors / FEC statistics > To: Observium <observium(a)lists.observium.org> > > Hi, > > We've got various Juniper devices with links that have FEC enabled and > CLI output shows the FEC stats, but I don't see them anywhere in > Observium. > > Is this not supported or am I missing something to where it's at / > what is it called? > We opened a JTAC case about this a year or so ago. At the time, there is NO fec available via ANY snmp mib. "we currently do NOT have support for Ethernet FEC Statistics via SNMP. There is a feature request that has been created internally to add support for it" Ask your SE about "RLI 46223" --Chris

2 1

Error in Observium
by Luis Enrique Torres Jacinto 25 Jan '24

25 Jan '24

Hello, good morning I have a problem seeing the information of 3 Cisco CBS350 Switches in observium (professional version), I add them normally like any other device, however it does not show me its Processor, Temperature, fanspeed, Status Indicators, etc. [cid:image006.jpg@01DA4F7C.759355E0] In other Cisco Switch models the tool works correctly. [cid:image007.jpg@01DA4F7C.759355E0] With the following command ./discovery.php -h 10.1.X.X. we found the following error: [cid:image005.png@01DA4F7C.5F5A1890] If anyone can support me I would appreciate it. Greetings

1 0

FEC errors / FEC statistics
by Brad Bendy 25 Jan '24

25 Jan '24

Hi, We've got various Juniper devices with links that have FEC enabled and CLI output shows the FEC stats, but I don't see them anywhere in Observium. Is this not supported or am I missing something to where it's at / what is it called? Thanks

2 1

cisco ASA's polling slow
by Tony Guadagno 24 Jan '24

24 Jan '24

Hi, I am just noticing that my Cisco ASA's poll really slow. While all my other infrastructure seems to poll about 5 to 7 sec per device, the ASA's all take 50 to 60 sec. Does anyone know why this is and maybe how to speed things up? Thanks Tony Guadagno O +1 585 577 1003 C +1 585 703 6700 E tonyg(a)guadagnoconsulting.com<mailto:tonyg@guadagnoconsulting.com> [cid:image001.jpg@01D84DD6.FC9912E0]

3 5

Re: Aruba Instant AP wireless info? (clients, etc)
by Wolf Noble 21 Jan '24

21 Jan '24

I’d be happy to help however I can with this.. I'd really like to be able to see some information from my APs around usage/clients/errors/etc.... if you want more mib walks i can update the jira ticket with them again? but im not sure there will be much else to glean as not much has changed here.. if that's jus not gonna happen .... for.... whatever reason ... is there a vendor whose APs *ARE* well supported? I'd kinda figured this would be a solved problem.... or at least, wouldn't still be an issue several years later. is there anything I can do to help get traction here? I'm not sure what help is actually helpful and what's obnoxious ;) W [= The contents of this message have been written, read, processed, erased, sorted, sniffed, compressed, rewritten, misspelled, overcompensated, lost, found, and most importantly delivered entirely with recycled electrons =] > On Nov 14, 2023, at 20:47, Adam Armstrong via observium <observium(a)lists.observium.org> wrote: > > I think someone asked about this last week, and it appears we don't actually have any support for any wireless metrics from Aruba at all at the moment. > > I do have a set of walks from an aruba device and might look at adding some support for them, though. > > Wireless is a bit of a mess, all of the vendors present the data in different ways with different demarcations, so it's quite difficult to collect and handle all of the different vendors in a sane manner. > > adam. > > Wolf Noble via observium wrote on 14/11/2023 23:40: >> howdy all! >> >> does anyone else have the problem of seeing no wireless stats in observium from Aruba instant APs? >> >> [= The contents of this message have been written, read, processed, erased, sorted, sniffed, compressed, rewritten, misspelled, overcompensated, lost, found, and most importantly delivered entirely with recycled electrons =] >> >> >> _______________________________________________ >> observium mailing list -- observium(a)lists.observium.org <mailto:observium@lists.observium.org> >> To unsubscribe send an email to observium-leave(a)lists.observium.org <mailto:observium-leave@lists.observium.org> > > _______________________________________________ > observium mailing list -- observium(a)lists.observium.org > To unsubscribe send an email to observium-leave(a)lists.observium.org

2 2

LXC Proxmox Container
by Yesaya A. Medellu 21 Jan '24

21 Jan '24

Hi All Can Observium Monitoring LXC Container at least count it as VM inside PVE VMs thanks in advance Abraham Makingroup Disclaimer: This email and any files transmitted with it are confidential and intended solely for the use of the individual or entity to whom they are addressed. If you have received this email in error, please notify the system manager. This message contains confidential information and is intended only for the individual named. If you are not the named addressee, you should not disseminate, distribute or copy this email. Please notify the sender immediately by email if you have received this email by mistake and delete this email from your system. Makingroup Disclaimer: This email and any files transmitted with it are confidential and intended solely for the use of the individual or entity to whom they are addressed. If you have received this email in error, please notify the system manager. This message contains confidential information and is intended only for the individual named. If you are not the named addressee, you should not disseminate, distribute or copy this email. Please notify the sender immediately by email if you have received this email by mistake and delete this email from your system.

3 2

need help to subscribe professional.
by Gurupad Deshmukh 19 Jan '24

19 Jan '24

Dear team, I have install observium communitiy edition on ubuntu, but I want to subscribe professional version , can you please help us how to upgrade subscription. please share contact details , I have some queries to clear before professional subscription. Regards, Gurupad deshmukh, 9767416210.

2 1

PowerDNS Recursive Server application
by Kevin Riahi 17 Jan '24

17 Jan '24

What is the process for support on applications for observium subscribers? In this case the PowerDNS Recursive Server application. Should we reach out to the original author. In this case the script is very simple and it seems it has no documented authors. The issue is the script is no longer working even though it was in the past. It may be because PowerDNS Recursive Server 4.8 has made permission changes to /var/run/pdns-recursor/pdns_recursor.controlsocket Testing the script /usr/lib/observium_agent/local/powerdns-recursor and it will execute with below error. <<<app-powerdns-recursor>>> Fatal: Unable to connect to remote '/var/run/pdns-recursor/pdns_recursor.controlsocket': Permission denied Here is the powerdns-recursor script . #!/bin/sh recctrl=`which rec_control` if [ $? -eq 0 ] then echo '<<<app-powerdns-recursor>>>' $recctrl get-all fi TIA Kevin

4 6

RRD went missing after interface description change, screwing up billing.
by smiller＠fasttrackcomm.net 16 Jan '24

16 Jan '24

Hey there, I have a bundle ether interface that had its interface description change, and now when I'm viewing the bill summary which keys to this bundle ether interface, the graphs are missing, and if I hover over the port under "billed ports" in the bill information section, I get 4 of the same error: ERROR: opening '/opt/observium/rrd/<<IP>>/port-113.rrd': No such file or directory. I go into the server and sure enough there is no port-113.rrd in that directory. Also, the port description name under the billed ports section shows the old interface description still. I have another bundle ether that also had an updated interface description and that one is fine, and the port description is updated correctly on the billing page. How do I fix this? It seems like maybe data is still getting successfully pulled because the Used counts are increasing along with the average. What would happen if I created an empty port-113.rrd file in the directory, and why would this file have gone missing? Thanks for any help you can provide. -Seth

1 0

ZyXEL WLAN AP NWA1123ACv3
by Oberreiter Andreas 12 Jan '24

12 Jan '24

Hi, I have ZyXEL WLAN AP NWA1123ACv3 they are spoiling my system by creating new ports, with repeating names, every view hours. I have some APs with nearly 2000 Ports. Is there a way to prevent Observium from scanning for new ports for a specific device group. Kind Regards Mit freundlichen Grüßen Andreas Oberreiter

1 1

upgrade CE edition to Professional edition
by Raphael Pierazzi 10 Jan '24

10 Jan '24

Good morning , I would like to upgrade from the CE edition to the professional edition ( and paid). I risk losing my configuration? how does the upgrade work? Thanks for your feedback, Sincerely,

2 2

Performance
by Arnoldo Vidal Bravo 08 Jan '24

08 Jan '24

Hello, we have installed observium 23.2.12520. When the survey is carried out on the devices, there are several that indicate that the time used was 1 or 2 seconds while others exceeded 20 seconds. How could this be fixed? The devices have the same make and model. -- Saluda cordialmente

1 0

SNMP sysLocation NeDi format
by Brad Bendy 08 Jan '24

08 Jan '24

I found a post from 2014 showing the NeDi format works when using the Google API. I have tried a few different variations of it but under the location it shows a location for each device as the rack unit is different per device. Is this not supported and we should just do the physical location and not deal with the rack and rack unit or I am missing something? I thought before I had used () or [] in the location and the map parsing still worked but I don't see that in the docs anywhere. Thanks

1 0

PHP Weathermap Integration
by Adam Armstrong 03 Jan '24

03 Jan '24

Hi Guys, We added PHP Weathermap into Observium ~2 years ago, but the enabling option wasn't documented because there was an odd javascript bug breaking the UI. It turns out the bug was the same variable name being used in two completely separate bits of code, causing a clash. Typical Javascript. This is fixed now and it mostly functions, so I've unhidden the enabling option in the web-based config. $config['weathermap']['enable'] = TRUE; It works slightly differently to the original weathermap, it generates maps on the fly and is a little better integrated into the UI. It retains all of the old issues though, the weathermap code is very, very old and should not be enabled on installs untrusted people have access to. Thanks, adam. -- Sent from Postbox <https://www.postbox-inc.com/?utm_source=email&utm_medium=siglink&utm_campai…>

3 2

xinetd not supported on RHEL 9, use systemd instead
by Tony Guadagno 29 Dec '23

29 Dec '23

Hi, as xinetd is not provided for RHEL 9, I wrote a couple of systemd units to make this work. I am sure someone smarter than me could make this better, but I have confirmed this does work on any modern systemd implementation. Would it be possible to get this in the documentation so the knowledge is not lost? Here is the info: Create a new file: /etc/systemd/system/observiumagent.socket Paste this into the file: [Unit] Description=Observium Agent Socket Requires=observiumagent@.service [Socket] ListenStream=36602 Accept=yes [Install] WantedBy=sockets.target Change permissions on the file: Chmod 660 /etc/systemd/system/observiumagent.socket Create another new file: /etc/systemd/system/observiumagent@.service<mailto:/etc/systemd/system/observiumagent@.service> Paste this into the file: [Unit] Description=Observium Agent Server PartOf=observiumagent.socket [Service] ExecStart=-/usr/bin/observium_agent #User=example #Group=example StandardInput=socket Sockets=observiumagent.socket Change permissions on the file: Chmod 660 /etc/systemd/system/observiumagent@.service<mailto:/etc/systemd/system/observiumagent@.service> Reload systemd: systemctl daemon-reload Enable and start the service: systemctl enable --now observiumagent.socket That's it, of course, follow the rest of the direction on the page (UNIX Agent - Observium<https://docs.observium.org/unix_agent/>), just ignore the ones involving xinetd Thanks ) Tony Guadagno O +1 585 577 1003 C +1 585 703 6700 E tonyg(a)guadagnoconsulting.com<mailto:tonyg@guadagnoconsulting.com> [cid:image001.jpg@01D84DD6.FC9912E0]

2 1

Traffic accounting not working anymore
by Anthony Polselli 13 Dec '23

13 Dec '23

We recently built a new server with Ubuntu 22.04.3 LTS and migrated Observium over. Everything seams to be working fine except for the Traffic Accounting. On the summary screen, it shows data from months ago (just before the upgrade), but when you click on one of the "bills" and look at the bandwidth graph, it's blank. I've tried adding a new bill and it same thing, no data. But if I click on the interface and go the that switch port, all the graphs are there. How can I reconnect the Traffic Accounting to pull data from the switchport graphs again? Thanks all!

2 2

Network Traffic Map
by rpierazzi＠azfrance.fr 11 Dec '23

11 Dec '23

Good morning, I would like to know how to program the visualization of the network Traffic Map. When I go to the page and click on one device, nothing happens.. Thanks for your feedback, Sincerely,

1 0

units on error graphs?
by Tony Guadagno 04 Dec '23

04 Dec '23

Hi, sorry if this is obvious, but it just occurred to me that I don't understand this graph. This comes from an Ethernet port on a cisco router.... [cid:image001.jpg@01DA26BB.DFC59A20] What are the units??for example the "last in errors/s" is 44.25m???? 44.24 million? That can't be right. Thanks in advance Tony Guadagno O +1 585 577 1003 C +1 585 703 6700 E tonyg(a)guadagnoconsulting.com<mailto:tonyg@guadagnoconsulting.com> [cid:image001.jpg@01D84DD6.FC9912E0]

2 5

is it possible to disable an alert checker?
by Tony Guadagno 30 Nov '23

30 Nov '23

Hi, is it possible to disable a specific alert checker without deleting it? I am debugging an alert checker that is pretty noisy so I want to stop the alerts for a bit but I don't want to loose the work I have put into it. thanks Tony Guadagno O +1 585 577 1003 C +1 585 703 6700 E tonyg(a)guadagnoconsulting.com<mailto:tonyg@guadagnoconsulting.com> [cid:image001.jpg@01D84DD6.FC9912E0]

2 2

Discovery problem with an old Dell Powerconnect and Observium CE 23.9.13005
by mosdvas 30 Nov '23

30 Nov '23

Hello, After the last update i'm experiencing a bug on the discovery on an old switch. This is a Dell PowerConnect 3448. : Vendor/Hardware Dell PowerConnect 3448 Operating system Dell PowerConnect (FastPath) 2.0.0.34 The bug appeared in this CE version, until now the info feedback was correct. The SNMP poller seem ok. Can you help me with this problem? Here's the error dump : ##### Module Start: sensors ##### o POWER-ETHERNET-MIB pethMainPseOperStatus [] o OLD-DNOS-BOXSERVICES-PRIVATE-MIB ⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⣀⡀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀ ⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⣠⡶⠋⠁⠙⣦⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀ ⠀⣠⡶⠛⠛⠲⣤⣀⠀⠀⠀⠀⡀⠀⠀⠀⠀⠀⠀⠀⣠⠄⣠⣾⣡⠀⠀⠀⠀⠸⡆⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀ ⢰⡏⠀⠀⠀⠀⠈⣿⣷⣤⡐⣄⣽⡾⠧⠤⠤⣤⣤⣾⣿⣾⣿⣯⣀⡀⠀⠀⠀⢠⡇⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀ ⠀⢷⡀⠀⠀⠀⠀⣿⣿⣿⣿⣿⣯⣤⣤⡀⣠⣈⣹⣽⣿⣿⣿⣿⣷⣦⣄⠀⢀⡾⠁⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀ ⠀⠈⠻⣆⠀⠀⠀⣿⣿⣿⣿⣿⣿⣿⣿⣿⣿⣿⣿⣿⣿⣿⣿⣿⣿⡟⠀⣠⠞⠁⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀ ⠀⠀⠀⠈⢳⣆⠘⣿⣿⣿⣿⣿⣿⣿⣿⣿⣿⣿⣿⣿⣿⣿⣿⣿⣿⣧⣾⣷⣶⣤⣀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀ ⠀⠀⠀⠀⠀⣘⣿⣿⣿⣿⣿⣟⣿⣿⣿⣿⣿⣿⣿⣿⢡⡼⣿⣿⣿⣿⣿⣿⣿⣿⣿⣷⣄⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀ ⠀⠀⠀⠀⣾⣿⣿⣿⣿⣿⡏⣯⡇⣿⣿⣿⡏⣿⣿⣿⣜⣛⣿⣿⣿⣿⣿⣿⣿⣿⣿⣿⣿⡷⣄⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀ ⠀⠀⠀⠀⣿⣿⣿⣿⣿⣿⣿⣭⣾⣿⣿⣿⣇⣿⣿⣿⣿⣿⣿⣿⣿⣿⣿⣿⣿⣿⣿⡿⠃⠀⠘⢷⣄⠀⠀⠀⠀⠀⠀⠀⠀ ⠀⠀⠀⢠⣿⣿⡏⣿⣿⣿⣿⣿⣿⣿⣿⣿⣿⣿⣿⣿⣿⣿⣿⣿⣿⣿⡏⢿⣿⣿⡿⠁⠀⠀⠀⠸⣿⣷⡀⠀⠀⠀⠀⠀⠀ ⠀⠀⠀⢸⣿⣿⡇⠈⢻⣿⣿⣿⣿⣿⣿⣿⣿⣿⣿⣿⣿⣿⠻⣿⣿⡟⢠⣿⣿⡟⠁⠀⠀⠀⠀⠙⣻⣿⣿⣆⠀⠀⠀⠀⠀ ⠀⠀⠀⠈⣿⣿⣷⡈⠛⠿⣿⣿⡆⠻⢿⣿⣽⣿⣯⣿⠿⠃⠀⠻⠛⣰⣿⣿⠏⠀⠀⠀⠀⢀⣙⣿⣿⣿⣿⣿⣧⡀⠀⠀⠀ ⠀⠀⠀⠀⢿⠈⠙⠻⠷⠤⠄⢉⡁⠀⠀⠙⢉⣵⣌⠀⠀⠀⣀⠄⠘⠛⠋⠁⢀⣀⣤⣤⣭⣭⣽⣿⣿⣿⣿⣿⣿⣷⡀⠀⠀ ⠀⠀⠀⢀⣿⡄⠀⠀⠀⠀⠀⠀⠉⠓⢦⣄⡉⠉⢉⣩⠶⠋⠁⠀⠀⠀⣠⣾⣿⣿⣿⣿⣿⣿⣿⣿⣿⣿⣿⣿⣿⣿⣷⡀⠀ ⠀⠀⠀⣼⣿⣿⣷⣶⣶⣆⣀⡀⠀⠀⠀⠀⠉⠉⠉⠀⠀⠀⠀⠀⣠⣾⣿⣿⣿⣿⣿⣿⣿⣿⣿⣿⣿⣿⣿⣿⣿⣿⣿⣧⠀ ⠀⠀⠀⣿⣿⣿⣿⣿⣿⣿⣥⣄⡀⠀⠀⠀⠀⠀⠀⠀⠀⣸⣦⣾⣿⣿⣿⣿⣿⣿⡿⠿⠿⡟⠿⣿⣟⡿⢿⡛⠀⣘⣿⣿⡆ ⠀⠀⠀⢿⣿⣿⠿⠿⠿⠿⢿⣿⣿⣷⣿⡆⠀⠀⣶⣶⣾⡿⠛⠛⠛⠛⠻⣿⣿⣿⡟⠉⠀⠀⠀⠈⠁⠁⢀⢀⠲⣬⣿⣿⡇ ⠀⠀⠀⠘⡏⠳⣤⡄⠀⡄⠀⠀⠈⠙⢿⣧⠀⢀⣿⣿⠏⠀⠀⠀⠀⢀⣠⣿⣿⠋⠀⠀⠀⠀⠀⠀⠀⠀⠈⣯⣷⣿⣿⣿⡇ ⠀⠀⠀⠀⢿⠀⠀⠉⠳⣇⠀⠀⠀⠀⠀⢻⠀⢸⣿⣿⣆⢠⠀⡆⣰⡿⠟⠉⠀⠀⠀⠀⠀⠀⠀⠀⠀⢀⡾⣿⣿⣿⣿⣿⡇ ⠀⠀⠀⠀⠘⣧⠀⠀⠀⠹⣷⣤⣄⠀⡈⣾⡆⢸⡿⠋⠿⠾⠴⠷⠋⠀⠀⠀⠀⠀⠀⠀⠀⠀⢀⣠⠞⠉⣶⣾⣿⣿⣿⣿⠀ ⠀⠀⠀⠀⠀⠈⠳⣄⠀⠀⠀⠉⠻⣿⣿⣿⣇⠸⡷⠀⠀⠀⢀⣠⢄⣠⣶⣤⣤⣤⡤⠤⠖⠛⠉⠀⠠⣤⣼⣿⣿⣿⣿⡏⠀ ⠀⠀⠀⠀⠀⠀⠀⠉⢻⣷⠶⠒⠀⠀⠁⠈⢿⡄⣷⣆⣤⣶⡿⠛⠛⠛⠉⠉⠉⠁⠀⠀⠀⠀⠀⠀⠀⠈⢿⣿⣿⣿⣿⠇⠀ ⠀⠀⠀⠀⠀⠀⠀⠀⠘⣏⠀⠀⠀⠀⠀⠀⠘⣧⣿⣿⡿⢋⡤⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠰⣾⣿⣿⣿⣿⠀⠀ ⠀⠀⠀⠀⠀⠀⠀⠀⠀⢻⡄⠀⠀⠀⠀⠀⠀⢸⣿⣿⣶⣫⠆⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⡀⢦⣵⣿⣿⣿⣿⠇⠀⠀ ⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⢻⣆⠀⠀⠀⠀⠀⠀⣿⣿⣿⠇⠀⣀⠀⠀⠀⠀⠀⠀⠀⠀⠳⠦⣴⣿⣶⣿⣿⣿⣿⡿⠀⠀⠀ ⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠛⢷⣄⠀⠀⠀⠀⢹⣿⣿⣾⣿⣋⣤⡄⠀⠀⠀⠀⠀⠀⠀⠠⣈⠻⣿⣿⣿⣿⣿⡇⠀⠀⠀ ⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠈⠉⠛⣦⣤⣤⣾⣿⣿⣿⣿⣿⣯⡴⠂⣀⡀⠀⡀⡀⡀⢠⣬⣻⣿⣿⣿⣿⡿⠀⠀⠀⠀ ⠀⠀⠀⠀⠀⠀⠀⢀⣀⣀⣀⣀⣠⡴⠊⠉⠀⠈⢹⠿⣿⣿⣿⣿⣿⣷⣾⣿⠾⡿⡿⠿⣷⣦⣿⣿⣿⣿⣿⡟⠁⠀⠀⠀⠀ ⠀⠀⠀⠀⠀⠀⠀⠛⠷⠦⠤⠤⠴⠶⠶⠶⠶⠚⠉⠀⠀⠈⣉⣩⠽⠟⠋⠁⠀⠀⣁⣠⠿⠛⠋⠉⠉⠉⠁⠀⠀⠀⠀⠀⠀ ⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠉⠉⠉⠉⠉⠉⠁⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀ Oops! Something went wrong! You may want to report this to the Observium developers. count(): Argument #1 ($value) must be of type Countable|array, null given in /var/www/observium/includes/discovery/sensors/old-dnos-boxservices-private-mib.inc.php:14 Stack trace: #0: (unknown function) called at [/var/www/observium/includes/discovery/sensors/old-dnos-boxservices-private-mib.inc.php:14] 9: * @subpackage discovery 10: * @copyright (C) 2006-2013 Adam Armstrong, (C) 2013-2023 Observium Limited 11: * 12: */ 13: 14: if (count($valid['sensor']['temperature']['DNOS-BOXSERVICES-PRIVATE-MIB']) || 15: count($valid['sensor']['power']['DNOS-BOXSERVICES-PRIVATE-MIB'])) { 16: // Exit from discovery, since already added valid sensors by DNOS-BOXSERVICES-PRIVATE-MIB 17: // Note, DNOS-BOXSERVICES-PRIVATE-MIB and OLD-DNOS-BOXSERVICES-PRIVATE-MIB are crossed 18: echo 'Skipped by DNOS-BOXSERVICES-PRIVATE-MIB'; 19: return; #1: include called at [/var/www/observium/includes/include-dir-mib.inc.php:32] 27: 28: if (is_file($inc_file)) { 29: print_cli_data_field("$mib "); 30: 31: $inc_start = microtime(TRUE); // MIB timing start 32: $inc_status = include($inc_file); 33: echo(PHP_EOL); 34: 35: if ($include_lib && is_file($inc_dir . '.lib.php')) { 36: // separated functions include, for exclude fatal redeclare errors 37: include_once($inc_dir . '.lib.php'); #2: include called at [/var/www/observium/includes/discovery/sensors.inc.php:52] 47: } 48: } 49: 50: // Run sensor discovery scripts (also discovers state sensors as status entities) 51: $include_dir = "includes/discovery/sensors"; 52: include($config['install_dir'] . "/includes/include-dir-mib.inc.php"); 53: 54: // Run status-specific discovery scripts 55: $include_dir = "includes/discovery/status"; 56: include($config['install_dir'] . "/includes/include-dir-mib.inc.php"); 57: #3: include called at [/var/www/observium/includes/discovery/functions.inc.php:870] 865: $GLOBALS['module_stats'][$module] = []; 866: $valid[$module] = []; 867: 868: print_cli_heading("Module Start: %R" . $module); 869: 870: include("includes/discovery/$module.inc.php"); 871: 872: $m_end = utime(); 873: $GLOBALS['module_stats'][$module]['time'] = round($m_end - $m_start, 4); 874: print_module_stats($device, $module); 875: echo(PHP_EOL); #4: discover_device called at [/var/www/observium/discovery.php:216] 211: 212: foreach (dbFetchRows("SELECT * FROM `devices` WHERE `disabled` = 0 $where ORDER BY `last_discovered_timetaken` ASC", $params) as $device) { 213: // Additional check if device SNMPable, because during 214: // discovery many devices (long time), the some device can be switched off 215: if ($options['h'] === 'new' || is_snmpable($device)) { 216: discover_device($device, $options); 217: } else { 218: $string = "Device '" . $device['hostname'] . "' skipped, because switched off during runtime discovery process."; 219: print_debug($string); 220: logfile($argv[0] . ": $string"); 221: } Cordialement, Florian Isolet AS42929 - FI1735-RIPE LIGNE DIRECTE 05 18 10 18 12 artefact-groupe.fr <https://www.artefact-groupe.fr> Les donnees et renseignements contenus dans ce message sont personnels, confidentiels et secrets. Toute publication, utilisation ou diffusion, meme partielle, doit etre autorisee. Si vous n'etes pas le bon destinataire, nous vous demandons de ne pas lire, copier, utiliser ou divulguer cette communication. Nous vous prions de notifier cette erreur a l'expediteur et d'effacer immediatement cette communication de votre systeme. Any data and information contained in this electronic mail is personal, confidential and secret. Any total or partial publication, use or distribution must be authorized. If you are not the right addressee, we ask you not to read, copy, use or disclose this communication. Please notify this error to the sender and erase at once this communication from your system.

3 3

cisco router tunnel interfaces
by Tony Guadagno 28 Nov '23

28 Nov '23

Hi, I just noticed that Observium does not seem to list GRE Tunnel interfaces on Cisco routers. Are one of these including Tunnel interfaces? How do I get tunnel interfaces polled? thanks [cid:image002.jpg@01DA2205.08A73E50] Tony Guadagno O +1 585 577 1003 C +1 585 703 6700 E tonyg(a)guadagnoconsulting.com<mailto:tonyg@guadagnoconsulting.com> [cid:image001.jpg@01D84DD6.FC9912E0]

2 3

is there an alert kill switch?
by Tony Guadagno 28 Nov '23

28 Nov '23

Hi, when my Microsoft servers patch monthly, they often reboot and that causes an alert that is unnecessary for me. Is there a way (maybe a script I could write) that would disable alerting? I am thinking about making a cron job that would run monthly (at the time I am patching) that would disable alerting...then maybe 2 hrs later, re-enable alerting. Is this possible? Tony Guadagno O +1 585 577 1003 C +1 585 703 6700 E tonyg(a)guadagnoconsulting.com<mailto:tonyg@guadagnoconsulting.com> [cid:image001.jpg@01D84DD6.FC9912E0]

4 7

Security Questions
by Wilkinson, Matthew 27 Nov '23

27 Nov '23

Hello, I am deploying Observium into a secured environment and I've a few questions. * What security measures are in place to protect subscription SVN branch? * Does SVN do any checksums or hashing of the code after it is checkout to the client to ensure no malicious attempts were made in transit? * Is there a contact name and email we can document in cases where we need to get direct support? * Is there a regular notification mechanism for updates to Observium? E.g. via the mailing list or blog post? In other words, how do we find out about new security patches? Thanks for any and all help. Matt

1 0

Recover dashboard and alerts
by Chris James 26 Nov '23

26 Nov '23

We recently had to rebuild our observium server. Of course we lost the custom dashboards and alerts. Everything in the old observium directory was backed off. Can we recover the dashboards and alerts from the old directory? Chris James Vessel Production Systems Manager Infrastructure & Support

2 2

snmp syslocation dynamic geolocation
by Chris James 26 Nov '23

26 Nov '23

Does anyone know a way of integrating dynamic positioning into snmp? Usually you put the location in to syslocation attribute in snmpd.conf file. We have vessels which move about and wondered if there was away of using dynamic positioning. We have plenty of GPS sources onboard so not a problem there. Chris James Vessel Production Systems Manager Infrastructure & Support Telephone: +44 1932 376000 Direct: +44 1932 376817 Mobile: +44 7768 480557 Email: chris.james(a)pgs.com<mailto:chris.james@pgs.com>

1 0

Graph is not showing for a recently added Arista DCS-7020SRG-24C2 Switch.
by Prasun Kumar Mitra (NOC) 24 Nov '23

24 Nov '23

Hello, I am using Subscription version of Observium for over 4 years collecting data on over 35 devices including switch, routers and servers, using it daily I have recently added a Arista switch where traffic graph is not showing [or not getting drawn] although i can see the realtime traffic graph and all other info collected by observium. i have tried removing and re adding it to observium but the graph didn't worked. Can anyone help me resolve this. Observium Version: 23.11.13173 (15th November 2023) Device/ Hardware: Arista DCS-7020SRG-24C2 Device Firmware: Arista EOS 4.30.3M Regards, Prasun Kumar Mitra System Admin Alliance NOC Alliance Broadband Services Pvt. Ltd. P-89,C.I.T Road, Kolkata-700014 [cid:d027dbdc-38bf-4029-89b9-c38dff80934c]

2 1

Teams webhook images green/red
by Ivo van Tulden 21 Nov '23

21 Nov '23

Dear members, We have a webhook link to Microsoft teams for alerting from Observium. This works except for the "green/red" icons for a new alert or a fixed alert. We get "🔥" and "✅" instead of the icon, we have seen this working once but can't get it the work anymore. Do you have a solution how we can fix this? Examples: 🔥[servername] [storage] Disk near full 90% ✅[servername] [storage] Disk near full 90% Met vriendelijke groet, Ivo van Tulden Technical Infrastructure Engineer - IT Department << Security is van ons allemaal >> **** DISCLAIMER: The information sent in or attached to this e-mail is for the addressee only. If this e-mail message is unclear please contact VLISCO by e-mail or telephone. Disclosure or reproduction of this information to a third party without prior agreement of VLISCO is not allowed. VLISCO does not accept any responsibility for the correct and complete interpretation of this e-mail nor for the time of its arrival. VLISCO cannot be held responsible for any claim resulting from negotiations and/or decisions made directly or indirectly based on information contained in this e-mail message. Vlisco Netherlands B.V. Binnen Parallelweg 27, 5701 PH, Helmond, The Netherlands. Chamber of commerce Eindhoven 50751492. Tel.: +31 (0)492 570922 Fax: +31 (0)492 570230 Visit our website: www.vlisco.com ****

4 3

help with a filter
by Arnoldo Vidal Bravo 20 Nov '23

20 Nov '23

Hi, When I look into a device (any brand), I can't view only ports down. [image: image.png] When I apply Hide UP, nothing happens, but Hide DOWN works fine -- Saluda cordialmente

1 0

OpenBSD uptime
by Bryan Fields 16 Nov '23

16 Nov '23

I've setup a couple hosts running openbsd and note that uptime as reported in observium (I'm on the latest stable 13154) is showing incorrectly. Last reboot is showing as Jan 1 1970 as well. Has anyone else seen this on OpenBSD? Thanks, -- Bryan Fields 727-409-1194 - Voice http://bryanfields.net

4 9

WMI Polling shows only 3 services
by Scott Kohnert 16 Nov '23

16 Nov '23

First time posting and hopes that someone can assist. Been using Subscription version of Observium for over 10 years collecting data on over 150 server farm using it daily and have been asked to now add monitoring of Windows Services. I started to do this via Probes and SNMP checks but due to the shear volume of services and servers involved this would be a tedious process. I would like to use WMI to monitor Windows Services as it appears to poll faster. Unfortunately I ran into an issue where it only displays 3 services at a time. Windows Server has over 200 services by default, I don’t plan on monitoring all of them but at least a couple dozen. Using WMI would be a much easier way to setup alerts if I could get the full listing to appear, which is where I am needing help. Here is my setup to reproduce the issue (generalized information used for security) Follow the WMI setup in the help documentation for my UB 22.04 server Global Settings > Polling > WMI (turn on) Server discovered via SNMP Open Properties of Server and edit WMI information (per server polling only no global settings) WMI Hostname = nacn_ip_TCP:hostname.domain.local[sign] WMI Domain= domain WMI Username = username WMI Password = password After a couple of minutes, I get the results of only showing 3 services not a full list. AllJoyn Router Service Remote Desktop Service Themes I have tried this on multiple servers and the same 3 services appear each time. I began to look into the code and run the wmic query on the web server itself using the following query wmic -U “domain\username%password” //ncacn_ip_TCP:hostname.domain.local[sign] “select DisplayName, Name, State, Status from Win32_Service” It gave me the full listing results and from what I can see this is where the issue lies. CLASS: Win32_Service DisplayName|Name|State|Status AllJoyn Router Service|AJRouter|Stopped|OK Application Layer Gateway Service|ALG|Stopped|OK Application Identity|AppIDSvc|Stopped|OK … Telephony|tapisrv|Stopped|OK CLASS: Win32_TerminalService DisplayName|Name|State|Status Remote Desktop Services|TermService|Running|OK CLASS: Win32_Service DisplayName|Name|State|Status Themes|Themes|Running|OK Storage Tiers Management|TieringEngineService|Stopped|OK … The first item of the WMI services is the AllJoyn Router Service, then about halfway down the listing it produces a different CLASS:Win32_TerminalService and the headers. Then it has Remote Desktop Services and starts again with CLASS:Win32_Service and headers again, and the third entry to be displayed Themes. Looking through the code I think the issue resides in the /opt/observium/includes/wmi.inc.php code and the function wmi_parse. This is the function that is used (from what I can back trace) for performing the parsing of the WMI call and populating the database with the WMI entries. But when running the mysql query for the services listing it only shows these 3 listed and not all the services that the manual query performed on the server displays. I would like to ask if someone can look into the WMI process and check the coding to allow the WMIC query to populate ALL the service results in the web site. As a separate test I also went into the Global Settings > Discovery > WMI AutoDiscoveryOptions and added in several services manually (list of 10) not including the Remote Desktop Services and the results I get on the Windows Services tab show the Remote Desktop Services. So the 2nd CLASS that appears for this service appears to be causing the issue. Any help is appreacited.

2 2

Aruba Instant AP wireless info? (clients, etc)
by Wolf Noble 15 Nov '23

15 Nov '23

howdy all! does anyone else have the problem of seeing no wireless stats in observium from Aruba instant APs? [= The contents of this message have been written, read, processed, erased, sorted, sniffed, compressed, rewritten, misspelled, overcompensated, lost, found, and most importantly delivered entirely with recycled electrons =]

2 1

Re: observium Digest, Vol 160, Issue 8
by Luis Olavarrieta 14 Nov '23

14 Nov '23

Is there something to use with the api? This email is confidential and / or may contain inside information. If you are not the addressee or authorized to receive your emails, you must NOT use, copy, disclose or take any action based on this email or any other information herein, please notify the sender immediately by reply this email and delete this email and its attachments.Privacy note a: www.wynnmex.com Este correo electrónico es confidencial y/o puede contener información privilegiada. Si usted no es su destinatario o no es alguna persona autorizada por éste para recibir sus correos electrónicos, NO deberá utilizar, copiar, relevelar o tomar ninguna acción basada en este correo o cualquier otra información incluida en el, favor de notificar al remitente de inmediato mediante el envío de este correo y borrar a continuación totalmente este correo y sus anexos. Consulta nuestro aviso de privacidad en:www.wynnmex.com El 14/11/23, 10:47 a.m., "observium-request(a)lists.observium.org <mailto:observium-request@lists.observium.org>" <observium-request(a)lists.observium.org <mailto:observium-request@lists.observium.org>> escribió: Send observium mailing list submissions to observium(a)lists.observium.org <mailto:observium@lists.observium.org> To subscribe or unsubscribe via email, send a message with subject or body 'help' to observium-request(a)lists.observium.org <mailto:observium-request@lists.observium.org> You can reach the person managing the list at observium-owner(a)lists.observium.org <mailto:observium-owner@lists.observium.org> When replying, please edit your Subject line so it is more specific than "Re: Contents of observium digest..." Today's Topics: 1. Re: reporting (Ahmed Rahal) ---------------------------------------------------------------------- Message: 1 Date: Tue, 14 Nov 2023 11:01:51 -0500 From: Ahmed Rahal <arahal(a)fibrenoire.ca <mailto:arahal@fibrenoire.ca>> Subject: [Observium] Re: reporting To: Observium <observium(a)lists.observium.org <mailto:observium@lists.observium.org>> Cc: "observium-request(a)lists.observium.org <mailto:observium-request@lists.observium.org>" <observium-request(a)lists.observium.org <mailto:observium-request@lists.observium.org>>, Luis Olavarrieta <luis.olavarrieta(a)wynnmex.com <mailto:luis.olavarrieta@wynnmex.com>> Message-ID: <CAHaNNBUL=BOdS=QK5nmW3BF4DHtpSiO+sjMSdVKWm01HNUER6Q(a)mail.gmail.com <mailto:QK5nmW3BF4DHtpSiO+sjMSdVKWm01HNUER6Q@mail.gmail.com>> Content-Type: multipart/related; boundary="0000000000005bc91f060a1ee823" Hi Luis, Observium does not produce reports, but the API can provide you with most of the things you need for reporting. HTH, Ahmed. Le ven. 10 nov. 2023, à 09 h 22, Luis Olavarrieta via observium < observium(a)lists.observium.org <mailto:observium@lists.observium.org>> a écrit : > Hi Team: > > > > Is there a way to generate / export info to generate a monthly report? > > > > > > > > > > [image: signature_3057771358] > > > > This email is confidential and / or may contain inside information. If you > are not the addressee or authorized to receive your emails, you must NOT > use, copy, disclose or take any action based on this email or any other > information herein, please notify the sender immediately by reply this > email and delete this email and its attachments.Privacy note a: > www.wynnmex.com > > > > Este correo electrónico es confidencial y/o puede contener información > privilegiada. Si usted no es su destinatario o no es alguna persona > autorizada por éste para recibir sus correos electrónicos, NO deberá > utilizar, copiar, relevelar o tomar ninguna acción basada en este correo o > cualquier otra información incluida en el, favor de notificar al remitente > de inmediato mediante el envío de este correo y borrar a continuación > totalmente este correo y sus anexos. Consulta nuestro aviso de privacidad > en:www.wynnmex.com > > > > > _______________________________________________ > observium mailing list -- observium(a)lists.observium.org <mailto:observium@lists.observium.org> > To unsubscribe send an email to observium-leave(a)lists.observium.org <mailto:observium-leave@lists.observium.org> > -- Ahmed Rahal Administrateur de Systèmes / Systems Administrator *Videotron/Fibrenoire* - www.fibrenoire.ca A: 612 Rue Saint-Jacques, Montréal, QC H3C 1E2 ahmed.rahal(a)videotron.com <mailto:ahmed.rahal@videotron.com> Twitter: @fibrenoire

1 0

reporting
by Luis Olavarrieta 14 Nov '23

14 Nov '23

Hi Team: Is there a way to generate / export info to generate a monthly report? This email is confidential and / or may contain inside information. If you are not the addressee or authorized to receive your emails, you must NOT use, copy, disclose or take any action based on this email or any other information herein, please notify the sender immediately by reply this email and delete this email and its attachments.Privacy note a: www.wynnmex.com Este correo electrónico es confidencial y/o puede contener información privilegiada. Si usted no es su destinatario o no es alguna persona autorizada por éste para recibir sus correos electrónicos, NO deberá utilizar, copiar, relevelar o tomar ninguna acción basada en este correo o cualquier otra información incluida en el, favor de notificar al remitente de inmediato mediante el envío de este correo y borrar a continuación totalmente este correo y sus anexos. Consulta nuestro aviso de privacidad en:www.wynnmex.com

2 1

rancid device discover
by Sébastien Gay 10 Nov '23

10 Nov '23

Hello, I'm trying to insert a Huawei MA5800 router into rancid. It doesn't even appear in the router.db file. Can anyone advise me on the following command: $config['rancid']['os_map']['huawei'] = 'huawei' Best regards to all Sébastien

2 1

can i disable getbulk for a specific device?
by Tony Guadagno 09 Nov '23

09 Nov '23

Hi, I have some devices who's manufacturer states they do not support getBulk. In these cases, can I disable getBulk for these specific devices? Thanks Tony

2 1

ASSITANCE NEEDED IN CREATING AN ALERT (OBSERVIUM) ||
by Sarfaraz 09 Nov '23

09 Nov '23

Dear Team, We require assistance in setting up an alert, We have encountered some difficulties in triggering alerts and would greatly appreciate your guidance on this matter. We would be grateful if you could provide us with step-by-step instructions or any necessary resources to help us successfully create and trigger this alert. Regards, Sarfaraz Technical Support Engineer Pulse Telesystems Pvt Ltd. <http://www.pulse.in/> www.pulse.in | <mailto:data@pulse.in> data(a)pulse.in Phone: +91 84284 22555 <https://in.linkedin.com/company/pulsetelesystems> <https://twitter.com/pulsetele?lang=en> <https://www.facebook.com/pulsetelesystems/> <https://www.instagram.com/pulsetelesystems/>

1 0

Traffic accounting not showing previous period
by Anthony Polselli 03 Nov '23

03 Nov '23

All of the sudden, when I look at traffic accounting for last month, it's blank. Current month has data though. Any way to get this back? Thanks, [cid:image001.png@01DA0CD8.6342C380] __________________________________________ Anthony Polselli Chief Technology Officer Natural Networks, Inc. 7047 Carroll Rd. San Diego, CA 92121 anthony(a)naturalnetworks.com<mailto:anthony@naturalnetworks.com> http://www.naturalnetworks.com<http://www.naturalnetworks.com/> (619) 222-3232, ext: 101 office [cid:image002.png@01DA0CD8.6342C380]

2 2

Questions about Observium Enterprise Support
by Johan Carlander 31 Oct '23

31 Oct '23

Hi, I’ve been trying to find more detailed info about Observium Enterprise Support, does anyone here has such an agreement and can share the details? All I can find on the web page says: “Included Enterprise-grade email & live support: Yes, 10 hours” So I take it that means that up to 10 hours of live support is included, what will be the cost per hour for support after those 10 hours? I cannot find any definition of what live support is, I would guess that it means some sort of online meeting with screen sharing but it would good to have it in writing so we know what to expect. Is there any SLA for response time for new support tickets, for example within 4 hours or Next Business day? Thanks in advance. BR, Johan Carlander Senior consultant Mobile: +46 733 300 700 Email: johan(a)drivenbydata.se<mailto:johan@drivenbydata.se> Driven By Data AB, Dalagatan 25, 113 24, Stockholm drivenbydata.se<http://drivenbydata.se/>

1 0

EqualLogics Volume Monitoring
by cwager＠communicationsmuseum.org.uk 31 Oct '23

31 Oct '23

Good Afternoon, I have been setting up Observium, which I am relatively new to, and am not sure how to monitor the volumes of the EqualLogic Storage Array, Observium has detected it and provided sensors for the Physical Disk, fan, Controllers, and so on but no volumes are picked up. According to the following link, there are MIBs for this. https://mibs.observium.org/mib/EQLVOLUME-MIB/ If I SNMPWALK the OID's then I get the expected data, would it be possible for someone to advise how I may go about getting this data to be shown in Observium itself? Thanks Chris

2 3

WMI monitoring
by Luis Olavarrieta 30 Oct '23

30 Oct '23

Team, i’ve been trying to add my servers with WMI with no success. Im running the query like this root@visum-fumpm:~# wmic -U [ad/]soporte%PASSWORD. //ad.fqdn.org "select * from Win32_ComputerSystem" and I get this error message: [librpc/rpc/dcerpc_connect.c:337:dcerpc_pipe_connect_ncacn_ip_tcp_recv()] failed NT status (c00000b5) in dcerpc_pipe_connect_ncacn_ip_tcp_recv [librpc/rpc/dcerpc_connect.c:828:dcerpc_pipe_connect_b_recv()] failed NT status (c00000b5) in dcerpc_pipe_connect_b_recv [wmi/wmic.c:196:main()] ERROR: Login to remote object. NTSTATUS: NT_STATUS_IO_TIMEOUT - NT_STATUS_IO_TIMEOUT So I cant add it to my observium server with this configuration in the config.php file: $config['wmi']['domain'] = "ad.fqdn.org"; $config['wmi']['user'] = "soporte"; $config['wmi']['pass'] = "PASSWORD"; $config['poller_modules']['wmi'] = 1; I have tried with this “soporte” account and also directly with the administrator account with no success, same error message. Please advice. This email is confidential and / or may contain inside information. If you are not the addressee or authorized to receive your emails, you must NOT use, copy, disclose or take any action based on this email or any other information herein, please notify the sender immediately by reply this email and delete this email and its attachments.Privacy note a: www.wynnmex.com Este correo electrónico es confidencial y/o puede contener información privilegiada. Si usted no es su destinatario o no es alguna persona autorizada por éste para recibir sus correos electrónicos, NO deberá utilizar, copiar, relevelar o tomar ninguna acción basada en este correo o cualquier otra información incluida en el, favor de notificar al remitente de inmediato mediante el envío de este correo y borrar a continuación totalmente este correo y sus anexos. Consulta nuestro aviso de privacidad en:www.wynnmex.com

1 0

Call to undefined function generate_device_link()
by diowitt＠live.com 27 Oct '23

27 Oct '23

Hello! After I upgraded the observium CE, I did check errors and showed me this message: root@ctpge02:/opt/observium# ./check-errors.php ⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⣀⡀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀ ⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⣠⡶⠋⠁⠙⣦⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀ ⠀⣠⡶⠛⠛⠲⣤⣀⠀⠀⠀⠀⡀⠀⠀⠀⠀⠀⠀⠀⣠⠄⣠⣾⣡⠀⠀⠀⠀⠸⡆⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀ ⢰⡏⠀⠀⠀⠀⠈⣿⣷⣤⡐⣄⣽⡾⠧⠤⠤⣤⣤⣾⣿⣾⣿⣯⣀⡀⠀⠀⠀⢠⡇⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀ ⠀⢷⡀⠀⠀⠀⠀⣿⣿⣿⣿⣿⣯⣤⣤⡀⣠⣈⣹⣽⣿⣿⣿⣿⣷⣦⣄⠀⢀⡾⠁⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀ ⠀⠈⠻⣆⠀⠀⠀⣿⣿⣿⣿⣿⣿⣿⣿⣿⣿⣿⣿⣿⣿⣿⣿⣿⣿⡟⠀⣠⠞⠁⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀ ⠀⠀⠀⠈⢳⣆⠘⣿⣿⣿⣿⣿⣿⣿⣿⣿⣿⣿⣿⣿⣿⣿⣿⣿⣿⣧⣾⣷⣶⣤⣀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀ ⠀⠀⠀⠀⠀⣘⣿⣿⣿⣿⣿⣟⣿⣿⣿⣿⣿⣿⣿⣿⢡⡼⣿⣿⣿⣿⣿⣿⣿⣿⣿⣷⣄⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀ ⠀⠀⠀⠀⣾⣿⣿⣿⣿⣿⡏⣯⡇⣿⣿⣿⡏⣿⣿⣿⣜⣛⣿⣿⣿⣿⣿⣿⣿⣿⣿⣿⣿⡷⣄⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀ ⠀⠀⠀⠀⣿⣿⣿⣿⣿⣿⣿⣭⣾⣿⣿⣿⣇⣿⣿⣿⣿⣿⣿⣿⣿⣿⣿⣿⣿⣿⣿⡿⠃⠀⠘⢷⣄⠀⠀⠀⠀⠀⠀⠀⠀ ⠀⠀⠀⢠⣿⣿⡏⣿⣿⣿⣿⣿⣿⣿⣿⣿⣿⣿⣿⣿⣿⣿⣿⣿⣿⣿⡏⢿⣿⣿⡿⠁⠀⠀⠀⠸⣿⣷⡀⠀⠀⠀⠀⠀⠀ ⠀⠀⠀⢸⣿⣿⡇⠈⢻⣿⣿⣿⣿⣿⣿⣿⣿⣿⣿⣿⣿⣿⠻⣿⣿⡟⢠⣿⣿⡟⠁⠀⠀⠀⠀⠙⣻⣿⣿⣆⠀⠀⠀⠀⠀ ⠀⠀⠀⠈⣿⣿⣷⡈⠛⠿⣿⣿⡆⠻⢿⣿⣽⣿⣯⣿⠿⠃⠀⠻⠛⣰⣿⣿⠏⠀⠀⠀⠀⢀⣙⣿⣿⣿⣿⣿⣧⡀⠀⠀⠀ ⠀⠀⠀⠀⢿⠈⠙⠻⠷⠤⠄⢉⡁⠀⠀⠙⢉⣵⣌⠀⠀⠀⣀⠄⠘⠛⠋⠁⢀⣀⣤⣤⣭⣭⣽⣿⣿⣿⣿⣿⣿⣷⡀⠀⠀ ⠀⠀⠀⢀⣿⡄⠀⠀⠀⠀⠀⠀⠉⠓⢦⣄⡉⠉⢉⣩⠶⠋⠁⠀⠀⠀⣠⣾⣿⣿⣿⣿⣿⣿⣿⣿⣿⣿⣿⣿⣿⣿⣷⡀⠀ ⠀⠀⠀⣼⣿⣿⣷⣶⣶⣆⣀⡀⠀⠀⠀⠀⠉⠉⠉⠀⠀⠀⠀⠀⣠⣾⣿⣿⣿⣿⣿⣿⣿⣿⣿⣿⣿⣿⣿⣿⣿⣿⣿⣧⠀ ⠀⠀⠀⣿⣿⣿⣿⣿⣿⣿⣥⣄⡀⠀⠀⠀⠀⠀⠀⠀⠀⣸⣦⣾⣿⣿⣿⣿⣿⣿⡿⠿⠿⡟⠿⣿⣟⡿⢿⡛⠀⣘⣿⣿⡆ ⠀⠀⠀⢿⣿⣿⠿⠿⠿⠿⢿⣿⣿⣷⣿⡆⠀⠀⣶⣶⣾⡿⠛⠛⠛⠛⠻⣿⣿⣿⡟⠉⠀⠀⠀⠈⠁⠁⢀⢀⠲⣬⣿⣿⡇ ⠀⠀⠀⠘⡏⠳⣤⡄⠀⡄⠀⠀⠈⠙⢿⣧⠀⢀⣿⣿⠏⠀⠀⠀⠀⢀⣠⣿⣿⠋⠀⠀⠀⠀⠀⠀⠀⠀⠈⣯⣷⣿⣿⣿⡇ ⠀⠀⠀⠀⢿⠀⠀⠉⠳⣇⠀⠀⠀⠀⠀⢻⠀⢸⣿⣿⣆⢠⠀⡆⣰⡿⠟⠉⠀⠀⠀⠀⠀⠀⠀⠀⠀⢀⡾⣿⣿⣿⣿⣿⡇ ⠀⠀⠀⠀⠘⣧⠀⠀⠀⠹⣷⣤⣄⠀⡈⣾⡆⢸⡿⠋⠿⠾⠴⠷⠋⠀⠀⠀⠀⠀⠀⠀⠀⠀⢀⣠⠞⠉⣶⣾⣿⣿⣿⣿⠀ ⠀⠀⠀⠀⠀⠈⠳⣄⠀⠀⠀⠉⠻⣿⣿⣿⣇⠸⡷⠀⠀⠀⢀⣠⢄⣠⣶⣤⣤⣤⡤⠤⠖⠛⠉⠀⠠⣤⣼⣿⣿⣿⣿⡏⠀ ⠀⠀⠀⠀⠀⠀⠀⠉⢻⣷⠶⠒⠀⠀⠁⠈⢿⡄⣷⣆⣤⣶⡿⠛⠛⠛⠉⠉⠉⠁⠀⠀⠀⠀⠀⠀⠀⠈⢿⣿⣿⣿⣿⠇⠀ ⠀⠀⠀⠀⠀⠀⠀⠀⠘⣏⠀⠀⠀⠀⠀⠀⠘⣧⣿⣿⡿⢋⡤⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠰⣾⣿⣿⣿⣿⠀⠀ ⠀⠀⠀⠀⠀⠀⠀⠀⠀⢻⡄⠀⠀⠀⠀⠀⠀⢸⣿⣿⣶⣫⠆⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⡀⢦⣵⣿⣿⣿⣿⠇⠀⠀ ⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⢻⣆⠀⠀⠀⠀⠀⠀⣿⣿⣿⠇⠀⣀⠀⠀⠀⠀⠀⠀⠀⠀⠳⠦⣴⣿⣶⣿⣿⣿⣿⡿⠀⠀⠀ ⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠛⢷⣄⠀⠀⠀⠀⢹⣿⣿⣾⣿⣋⣤⡄⠀⠀⠀⠀⠀⠀⠀⠠⣈⠻⣿⣿⣿⣿⣿⡇⠀⠀⠀ ⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠈⠉⠛⣦⣤⣤⣾⣿⣿⣿⣿⣿⣯⡴⠂⣀⡀⠀⡀⡀⡀⢠⣬⣻⣿⣿⣿⣿⡿⠀⠀⠀⠀ ⠀⠀⠀⠀⠀⠀⠀⢀⣀⣀⣀⣀⣠⡴⠊⠉⠀⠈⢹⠿⣿⣿⣿⣿⣿⣷⣾⣿⠾⡿⡿⠿⣷⣦⣿⣿⣿⣿⣿⡟⠁⠀⠀⠀⠀ ⠀⠀⠀⠀⠀⠀⠀⠛⠷⠦⠤⠤⠴⠶⠶⠶⠶⠚⠉⠀⠀⠈⣉⣩⠽⠟⠋⠁⠀⠀⣁⣠⠿⠛⠋⠉⠉⠉⠁⠀⠀⠀⠀⠀⠀ ⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠉⠉⠉⠉⠉⠉⠁⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀ Oops! Something went wrong! You may want to report this to the Observium developers. Call to undefined function generate_device_link() in /opt/observium/check-errors.php:36 Stack trace: #0: (unknown function) called at [/opt/observium/check-errors.php:36] 31: $errored = 0; 32: 33: foreach (dbFetchRows("SELECT * FROM `ports` AS I, `devices` AS D WHERE I.device_id = D.device_id $where", $params) as $interface) { 34: $errors = $interface['ifInErrors_delta'] + $interface['ifOutErrors_delta']; 35: if ($errors > '1') { 36: $errored[] = generate_device_link($interface, $interface['hostname'] . " - " . $interface['ifDescr'] . " - " . $interface['ifAlias'] . " - " . $interface['ifInErrors_delta'] . " - " . $interface['ifOutErrors_delta']); root@ctpge02:/opt/observium# root@ctpge02:/opt/observium# 39: $i++; 40: } 41: There's something that I need to do? Tks!

2 2

Poller separator affected by service name
by support＠vechelde.de 26 Oct '23

26 Oct '23

Hi, I have a problem with the wmic module: CMD[/bin/wmic --user=*** --password=*** --delimiter='##' --namespace='root\CIMV2' //'Host' "SELECT DisplayName,Name,StartMode,State FROM Win32_Service"] I get this Situation: CMD EXITCODE[0] CMD RUNTIME[4.8128s] STDOUT[ CLASS: Win32_Service DisplayName##Name##StartMode##State (Other services...) Interne Windows-Datenbank##MSSQL$MICROSOFT##WID##Auto##Running (Other services...) ] PHP Fatal error: Uncaught ValueError: array_combine(): Argument #1 ($keys) and argument #2 ($values) must have the same number of elements in /opt/observium/includes/wmi.inc.php:140 Stack trace: #0 /opt/observium/includes/wmi.inc.php(140): array_combine() #1 /opt/observium/includes/wmi.inc.php(15): wmi_parse() #2 /opt/observium/includes/polling/wmi.inc.php(235): wmi_get() #3 /opt/observium/includes/polling/functions.inc.php(306): include('...') #4 /opt/observium/poller.php(171): poll_device() #5 {main} thrown in /opt/observium/includes/wmi.inc.php on line 140 The Service "MSSQL$MICROSOFT##WID" includes the delimiter '##' so the array has 4 Keys but this row got 5 values due to the servicename... Is there a way to change the delimiter or ignore this service?

1 0

Raisecom ISCOM ISCOM5508-GPSC(C)_ROAP_2.64.SP2.1_20211213
by rhett.zeeman＠ttconnect.co.za 26 Oct '23

26 Oct '23

Hi Team, we are trying to monitor the above device. This works well. Observium can even monitor the GPON PON interfaces eg: gpon-olt1/1. The problem we are having is trying the monitor the ONU devices on site at a client. We use Raisecom ONU's. There are currently mib files available but we noticed that the mib files are empty. So it would seem that Observium cant monitor the bandwidth of the onu's behind the splitter that is connected to the pon interface. Is this something we can manually do from our side? if we have a look at the mib files in /opt/observium/mib/raisecom and vi into the mib file, it is populated. [root@localhost raisecom]# vi RAISECOM-SYSTEM-MIB -- MibName=raisecomSystem -- ======================================================================= -- Version info -- -- Version 0.1 Created 2003.12.17 by GONGGUIDONG -- This version of MIB is created just for the use of Network Management Systems -- display the memory and cpu. -- -- Copyright(c) 2002-2005 by RAISECOM TECH, Ltd. -- modify history -- 02, 20130809, guokai, modify raisecomVoltIndex -- 01, 20090915, qiyun, Add CPU monitor MIBs. -- -- ======================================================================= RAISECOM-SYSTEM-MIB DEFINITIONS ::= BEGIN IMPORTS MODULE-IDENTITY,Unsigned32 FROM SNMPv2-SMI OBJECT-TYPE FROM SNMPv2-SMI raisecomAgent FROM RAISECOM-BASE-MIB TruthValue FROM SNMPv2-TC EnableVar FROM SWITCH-TC TimeStamp,TEXTUAL-CONVENTION FROM SNMPv2-TC; raisecomSystem MODULE-IDENTITY LAST-UPDATED "200507270000Z" ORGANIZATION "RAISECOM TECH, Ltd." CONTACT-INFO "www.raisecom.com" DESCRIPTION "raisecom System objects: objects common to all platforms." ::= { raisecomAgent 1 } -- -- Textual Conventions "RAISECOM-SYSTEM-MIB" [converted] 1550L, 59022C please advise on this as we need to be able to monitor the client bandwidth. Regards,.

2 1

Teams webhook debugging
by Ivo van Tulden 17 Oct '23

17 Oct '23

Dear members, After the great help with the dashboard I went of to the next part in automating, which is for us alerting through Teams. Hopefully you can help me as quickly with this as the last time. We want to use Teams Webhook function to create an alert message, which holds a couple of components. I have configured the webhook within MS Teams and setup the link with the Observium contacts. Created a alert which triggers and mentions the notification of contacts, but nothing happens within MS Teams. The problem can be with a couple of things, so I wanted to start with logging with Observium. This can probably show me if the firewall blocks, if the Webhook link was a bad URL, etc. Where can I find a debugging log of the notification actions, so I can start debugging? Met vriendelijke groet, Ivo van Tulden Technical Infrastructure Engineer - IT Department << Security is van ons allemaal >> **** DISCLAIMER: The information sent in or attached to this e-mail is for the addressee only. If this e-mail message is unclear please contact VLISCO by e-mail or telephone. Disclosure or reproduction of this information to a third party without prior agreement of VLISCO is not allowed. VLISCO does not accept any responsibility for the correct and complete interpretation of this e-mail nor for the time of its arrival. VLISCO cannot be held responsible for any claim resulting from negotiations and/or decisions made directly or indirectly based on information contained in this e-mail message. Vlisco Netherlands B.V. Binnen Parallelweg 27, 5701 PH, Helmond, The Netherlands. Chamber of commerce Eindhoven 50751492. Tel.: +31 (0)492 570922 Fax: +31 (0)492 570230 Visit our website: www.vlisco.com ****

2 2

Fwd: Juniper MX104 doesn't like load average graph
by David Beveridge 16 Oct '23

16 Oct '23

Last week I upgraded a server to Observium 23.10.13043 (stable) In Polling information I had a huge increase in system polling, (See attached images.) I backed out the upgrade and tried it again a few days later, when I had more time to investigate. In addition the processor graph had changed, showing much higher CPU usage I also noticed a new graph called Load Averages defined here... # svn blame /opt/observium/includes/definitions/mibs/juniper.inc.php 13020 adama // JUNIPER-MIB::jnxOperatingDescr.9.1.0.0 = STRING: Routing Engine 0 13020 adama // JUNIPER-MIB::jnxOperatingDescr.9.2.0.0 = STRING: Routing Engine 1 13020 adama // JUNIPER-MIB::jnxOperatingState.9.1.0.0 = INTEGER: running(2) 13020 adama // JUNIPER-MIB::jnxOperatingState.9.2.0.0 = INTEGER: standby(7) 13020 adama // JUNIPER-MIB::jnxOperating1MinLoadAvg.9.1.0.0 = Gauge32: 123 13020 adama // JUNIPER-MIB::jnxOperating1MinLoadAvg.9.2.0.0 = Gauge32: 8 13020 adama // JUNIPER-MIB::jnxOperating5MinLoadAvg.9.1.0.0 = Gauge32: 56 13020 adama // JUNIPER-MIB::jnxOperating5MinLoadAvg.9.2.0.0 = Gauge32: 5 13020 adama // JUNIPER-MIB::jnxOperating15MinLoadAvg.9.1.0.0 = Gauge32: 27 13020 adama // JUNIPER-MIB::jnxOperating15MinLoadAvg.9.2.0.0 = Gauge32: 0 13020 adama $config['mibs'][$mib]['la'] = [ 13020 adama 'type' => 'table', // In table mode get first entry with test condition 13020 adama 'scale' => 0.01, 13020 adama // Walks 13020 adama 'oid_extra' => 'jnxOperatingState.9', 13020 adama 'oid_1min' => 'jnxOperating1MinLoadAvg.9', 13020 adama 'oid_5min' => 'jnxOperating5MinLoadAvg.9', 13020 adama 'oid_15min' => 'jnxOperating15MinLoadAvg.9', 13020 adama 'test' => [ 'field' => 'jnxOperatingState', 'operator' => 'eq', 'value' => 'running' ], 13020 adama ]; 13020 adama I added unset($config['mibs'][$mib]['la']); // dave did this This has fixed the problem, I don't need the la graph anyway. I had tried to add this to confg.php, but that didn't work. I'm concerned that modifying the juniper.inc.php is not a good idea. Is there a better way to disable this?

2 1

consolidated availability graph
by Erwin Botas 14 Oct '23

14 Oct '23

Hello List, Willing to know if is possible to construct a consolidated device availability for several host “clusters” and have a % not host by host as were are committed to a service SLA Any suggestions welcome. Regards, Something to resume this hosts for example and the leyend able to show the calculation for the group of hosts. [cid:e14e30a7-4c52-4402-a29f-31fc9aabf7da@namprd10.prod.outlook.com] Erwin Botas Administrador de infraestructura senior • +506 2010-5000 • +506 2010-5050 • +506 8982-4885 • San José, CR • www.electrotecnica.com [https://www.electrotecnica.com/signature/bar2018CR.png] NOTA DE CONFIDENCIALIDAD: "La información contenida en este mensaje y sus adjuntos es estrictamente confidencial y se dirige exclusivamente a su destinatario. Si usted no es el destinatario indicado, cualquier divulgación, copia, distribución o uso del contenido de este documento es prohibido y será sancionado de acuerdo con la ley. Si recibió este mensaje por error, debe notificarlo de inmediato al remitente y destruirlo".

1 0

Add sensor data to dashboard
by Ivo van Tulden 14 Oct '23

14 Oct '23

Goodmorning, Please be advised that we just got a license, so if this isn't the correct way to get the information, please advice me how to do better. Is there a possibility to add a graph of a device to the dashboard, so the live information of that sensor data is shown? The link to the graph is something like this: https://<servername>/graphs/to=1697179853/id=313/type=sensor_graph/from=1697093453/<https://%3cservername%3e/graphs/to=1697179853/id=313/type=sensor_graph/from=1697093453/> Met vriendelijke groet, Ivo van Tulden Technical Infrastructure Engineer - IT Department << Security is van ons allemaal >> **** DISCLAIMER: The information sent in or attached to this e-mail is for the addressee only. If this e-mail message is unclear please contact VLISCO by e-mail or telephone. Disclosure or reproduction of this information to a third party without prior agreement of VLISCO is not allowed. VLISCO does not accept any responsibility for the correct and complete interpretation of this e-mail nor for the time of its arrival. VLISCO cannot be held responsible for any claim resulting from negotiations and/or decisions made directly or indirectly based on information contained in this e-mail message. Vlisco Netherlands B.V. Binnen Parallelweg 27, 5701 PH, Helmond, The Netherlands. Chamber of commerce Eindhoven 50751492. Tel.: +31 (0)492 570922 Fax: +31 (0)492 570230 Visit our website: www.vlisco.com ****

3 4