- observium - lists.observium.org

Alerts on Aggregate values or sums?
by Darrell Budic 02 Jan '18

02 Jan '18

Bit of an RFE here, would like to be able to alert on the aggregate value for a group, or do sums in the alert checker test field, unless I’m just missing how to do this? My particular use check is adding up the total power for a 3 phase PDU (and a group for the power panel), and alerting if the total watts or amps are greater than 80% of the circuit capacity. Total Power Output on my APC 3 phase PDUs doesn’t work for me here because it’s dependent on the power factor of the connected devices, and that isn’t readily available in observium. Even if it was, I’d still need math (division this time) on two values. Sums/aggregates seem like the easiest route for this task. Thanks, -Darrell

2 1

multi device graph for sensors?
by Darrell Budic 02 Jan '18

02 Jan '18

Is there a way to get a summary (and sum) of a particular sensor? I’d like to have a one graph for all my PDUs with the apower attribute summed up for a total, see what the absolute # is. -Darrell

4 11

Alert chekers entites 'disapearing'
by Edvinas K 28 Dec '17

28 Dec '17

Hello, I've created alarm checker: os equals nxos hostname match *NET* ifType equals ethernetCsmacd ifAlias match *vPC Keep-alive link* And after a while i noticed that some entities where disapeared. The device was reachable and etc. I did a "rebuild' and they're reappeared again. What could be the cause ? NXOS ? :)

5 14

Re: [Observium] Collecting snmp traps with Observium
by Gustav Ulander 23 Dec '17

23 Dec '17

Hello. We would like to collect snmp traps from our routers and use them for alerting. However i cant find a way to do it? Has someone managed to get this to work? We are trying to get alerting to work with IS-IS neighbor up and down and so on. Best regards. //Gustav

3 5

false positive NX-OS alert ?
by Edvinas K 23 Dec '17

23 Dec '17

[image: Inline image 1] Hello, Is there any explanation - why this alert came up ? >From device sensors info now i see this information: [image: Inline image 2] The NX-OS stack (again) sent wrong condition information and alert generated by the "greater than 0" rule ? Is there are the way to minimaze these false positives ? Thank you.

2 2

HP J8992A Switch 6200yl-24G
by Fred Sharpsteen 22 Dec '17

22 Dec '17

We are using Observium to help support or local schools and we have a district that is using an HPJ8992A Switch 6200yl-24G, firmware K.15.16.0006. This switch is lacking many details in Observium the first and biggest one is the Port details. No Ports are showing on this switch.

4 6

LLDP huawei
by Jan Peters 21 Dec '17

21 Dec '17

Hi everybody, I'm testing observium community edition with our new huawei-switches: S5720-52X-PWR-SI-AC S6720-30C-EI-24S-AC CE6855-48T6Q-HI observium is working well, with a lot of informations! thx for that! But the LLDP will not shown in the port section. Is there a support for LLDP huawei switches in the pro-version of observium? Another question: http://postman.memetic.org/pipermail/observium/ The archive will not be displayed: You don't have permission to access /pipermail/observium/ on this server. Best regards Peter

1 0

accessing API and inventory API
by Edvinas K 20 Dec '17

20 Dec '17

Hello, We're using professional edition and started using API. I enabled basic API and Inventory API in config.php. But don't know how to access the Inventory API ? Didn't saw it in API instructions Page. Can you help ? Thank you.

2 2

NetFlow Recommendation
by Oludayo Oyediran 20 Dec '17

20 Dec '17

Afternoon All, We recently purchased Observium after a recommendation from our Network Engineer, what Netflow software would you recommend to use alongside Observium? If you know any Open Source ones, that'd be awesome. I came across Nfsen but it's a tad too old. Also I have Observium talking to 6 out of 8 of my routers and SNMP is turned on on all of them. If you require any info please let me know. There are 7 Cisco x 1 Juniper routers and the affected routers are Cisco. Regards, Oludayo Oyediran I IT Operations Officer e ooyediran(a)jjoconnor.com.au<mailto:ooyediran@jjoconnor.com.au> t 03 5382 1727 423 Western Highway | Horsham Victoria 3402 www.oconnorscaseih.com.au<http://www.oconnorscaseih.com.au/> This communication may contain confidential or copyright information of JJ O'Connor & Sons Pty Ltd (ABN 33 005 242 142). If you are not an intended recipient, you must not keep, forward, copy, use, save or rely on this communication, and any such action is unauthorised and prohibited. If you have received this communication in error, please reply to this email to notify the sender of its incorrect delivery, and then delete both it and your reply. -- Message protected by MailGuard: e-mail anti-virus, anti-spam and content filtering. http://www.mailguard.com.au

5 4

Syslog Alerts
by Peter Derissen 20 Dec '17

20 Dec '17

Hello, Im trying to set up some syslog alerts in observium. 1 want to have 3 up and 3 down alerts. Any Idea? /ifOperStatus down/ works just fine. /ifOperStatus down(2), ifName ae/ Not working /ifOperStatus down(2), ifName xe/ Not working /ifOperStatus down(2), ifName ge/ Not working Gr Peter ******** IMPORTANT NOTICE ******** This e-mail (including any attachments) may contain information that is confidential or otherwise protected from disclosure and it is intended only for the addressees. If you are not the intended recipient, please note that any copying, distribution or other use of information contained in this e-mail (and its attachments) is not allowed. If you have received this e-mail in error, kindly notify us immediately by telephone or e-mail and delete the message (including any attachments) from your system. Please note that e-mail messages may contain computer viruses or other defects, may not be accurately replicated on other systems, or may be subject of unauthorized interception or other interference without the knowledge of sender or recipient. Eurofiber only sends and receives e-mails on the basis that Eurofiber is not responsible for any such computer viruses, corruption or other interference or any consequences thereof. Eurofiber Nederland B.V. is registered in the Chamber of Commerce of Amsterdam with number 34134377, VAT number NL 8088.51.524 B01.

2 3

Multi year history
by Attila Nagy 19 Dec '17

19 Dec '17

Hi everyone! I was wondering about whether there is a recommended/approved/tested/tolerated way or plan of creating multi-year history (RRD data)? To reformulate it, changing the day/week/month/year history into something like day/week/month/year/10years... It's not a show-stopper, but sometimes there is demand to show or analyze historical data for more than 1 year in the past. Regards, Tylla

3 7

Re: [Observium] Aggregate graphs are limited to 349 ports
by Markus Klock 18 Dec '17

18 Dec '17

Hi, this is possible by making a port group. There is No limit there I Think /Markus Den 18 dec. 2017 20:31 skrev "Richard Wigzell" <richard.wigzell(a)it.ox.ac.uk >: Hello, is this configurable? We would like to be able to see aggragte throughput for a number of our networks but the port count for the selection is more than 349. [image: cid:image001.jpg@01CE9215.D39244B0] <https://www.it.ox.ac.uk/> *Richard Wigzell* Technical Lead, Storage Platforms IT Services | University of Oxford 13 Banbury Road, Oxford OX2 6NN *T:* 01865 616282 www.it.ox.ac.uk _______________________________________________ observium mailing list observium(a)observium.org http://postman.memetic.org/cgi-bin/mailman/listinfo/observium

2 1

Aggregate graphs are limited to 349 ports
by Richard Wigzell 18 Dec '17

18 Dec '17

Hello, is this configurable? We would like to be able to see aggragte throughput for a number of our networks but the port count for the selection is more than 349. [cid:image001.png@01D37836.9C729B40] [cid:image001.jpg@01CE9215.D39244B0]<https://www.it.ox.ac.uk/> Richard Wigzell Technical Lead, Storage Platforms IT Services | University of Oxford 13 Banbury Road, Oxford OX2 6NN T: 01865 616282 www.it.ox.ac.uk<https://www.it.ox.ac.uk/>

1 0

"Access to outside localnet is blocked "
by Edvinas K 18 Dec '17

18 Dec '17

Hello, >From 11/30 in observium.log i started to see these messages: "[2017/12/13 10:14:05 +0000] alerter.php(9571): get_http_request() exit with timeout. Access to outside localnet is blocked by firewall or network problems. Check proxy settings. [2017/12/13 11:33:16 +0000] discovery.php(24209): get_http_request() exit with timeout. Access to outside localnet is blocked by firewall or network problems. Check proxy settings." what could cause that ? Thanks

2 1

[QUESTION] Alerting Different Group and Devices
by San Rollheiser 16 Dec '17

16 Dec '17

Hi, i have a problem with the Alerts, in the first case i dont recieve the emails alerts, after the update my alerts never send to my email. But before the update the emails alerting work fine... But my principal problem is the alerting notifications via email or slack or sms to differents groups and devices... Ex: I have 3 clients this clients have 50 devices each one... I need send only the alerts related for each clients devices not for all devices. This is possible? Thx. BR Santiago

4 5

Multiple AD authentication
by Richard Wigzell 15 Dec '17

15 Dec '17

Hi, is it possible to configure Observium to authenticate against multiple Active Directorys? We have Pro and would like users from two ADs to be able to use it. Regards Rw

3 2

UNIX Agent graph history
by Attila Nagy 14 Dec '17

14 Dec '17

Hi everyone! We are using the CE version (17.9.0) so ignore my e-mail if this is already solved in the Pro edition. We started to configure the UNIX agent on a few of our machines and we saw that all the pop-up graphs in the Apps overviews are only showing the last 24 hours. Is this on purpose? Isn't there some possibility to make these graphs show the usual way (day, week, month, year)? Regards, Tylla

2 2

Netonix MIB
by Travis Garrison 14 Dec '17

14 Dec '17

We noticed in the changelog that Netonix MIB was added. We have a Netonix switch but it was discovered as a generic device. We looked at the MIB list but we do not see the Netonix MIB in the list. Do we need to do anything special? Netonix WS-8-150-AC Observium 17.11.8942 (rolling) Thank you Travis

5 9

WMI Timeout option
by Richard Wigzell 11 Dec '17

11 Dec '17

Hello, is there a config option to set the WMI connection timeout? Thanks. [cid:image001.jpg@01CE9215.D39244B0]<https://www.it.ox.ac.uk/> Richard Wigzell Technical Lead, Storage Platforms IT Services | University of Oxford 13 Banbury Road, Oxford OX2 6NN T: 01865 616282 www.it.ox.ac.uk<https://www.it.ox.ac.uk/>

1 0

logical OR/AND matching Devices, Entities
by Edvinas K 11 Dec '17

11 Dec '17

Hello, Is it possible in Alert checker under the same field to add value with logical OR, for example: Under "Device Match" - group includes Nexus|ASRS|ISR and the same question on Entity match. Thanks

2 1

Re: [Observium] Netapp
by Youssef BENGELLOUN - ZAHR 11 Dec '17

11 Dec '17

2 3

Netapp
by Jacek.Dabrowski＠selgros.pl 11 Dec '17

11 Dec '17

Hello, I was added a Netapp storage to observium but is recognized as a generic device. Netapp model 2800 It's someone add any storage to observium? Observium version at revision 8986 Pozdrawiam Jacek Dąbrowski Koordynator Administratorów IT [cid:image001.jpg@01D37281.AEEC3660] Transgourmet Polska Sp. z o.o. Zamenhofa 133, 61-131 Poznań, Polska tel.: +48 61 87 42 017 kom.:+48 604 069 933 E-mail: Jacek.Dabrowski(a)selgros.pl www.selgros.pl<http://www.selgros.pl> www.selgros24.pl<http://www.selgros24.pl> www.transgourmet.pl<http://www.transgourmet.pl> Transgourmet Polska Sp. z o.o. jest zarejestrowana w Sądzie Rejonowym Poznań-Nowe Miasto i Wilda w Poznaniu, Wydział VIII Gospodarczy Krajowego Rejestru Sądowego pod nr KRS: 0000045597. NIP: PL 781-10-11-998, REGON 630375413. Wysokość kapitału zakładowego: 310.000.000,00 złotych. Zapraszamy do korzystania z aplikacji HELPDESK<https://horologium>

2 1

Problem with special characters on device descriptions / snmp location etc...
by Javier Valero 11 Dec '17

11 Dec '17

Hello We are using Observium CE as part of our monitoring systems at IslaLink / OranLink. A few weeks ago, we updated to the last CE version (17.9.0). Since then, we are experiencing problems with the interface descriptions that may contain some especial characters like “áóéñ…”. It also happens with the SNMP location string. Seems that this was an old bug that was already solved: Observium OBS-1396 UTF-8/ISO characters fail in SNMP location This is causing some events flood, and incorrect display. I attach some captures: [cid:image001.png@01D35C8C.F9C1C980][cid:image002.png@01D35C8C.F9C1C980] We tried to remove all special characters, but sometimes it’s not possible or easy. May this bug have emerged again? Thank you. Best regards. [IslaLink, BalaLink, OranLink] Javier Valero Coordinador Molino de las fuentes S/N, 46026 Valencia - Spain Teléfono: +34 96 373 20 06 Móvil: +34 619 53 77 44 Este mensaje electrónico y cualquier documento que pueda llevar adjunto, es para uso exclusivo de su/s destinatario/s, pudiendo contener información protegida y/o confidencial. Si recibe este mensaje por error, le agradeceremos que se lo comunique inmediatamente a su remitente por correo electrónico y lo elimine de su ordenador, destruyendo toda copia del mismo. Muchas gracias.

2 10

Syslog Alert log Message length
by Richard Wigzell 11 Dec '17

11 Dec '17

Hello, could the Syslog Alert log Message length be increased, it's not long enough for the messages we are capturing. Many thanks [cid:image001.png@01D37259.75D4C310] [cid:image001.jpg@01CE9215.D39244B0]<https://www.it.ox.ac.uk/> Richard Wigzell Technical Lead, Storage Platforms IT Services | University of Oxford 13 Banbury Road, Oxford OX2 6NN T: 01865 616282 www.it.ox.ac.uk<https://www.it.ox.ac.uk/>

1 0

How do I correct this time discrepancy?
by Joe Brouillette 08 Dec '17

08 Dec '17

How do I fix the time discrepancy between my Observium server and the Observium UI? Please see the attached screenshot. The time on my server is correct but the time displayed on the UI is off by an hour. Also, the "Uptime" shown on the attached screenshot shows "Down 8h 4m 59s." I checked the graph for this server and I see no downtime. Thanks, Joe Brouillette Computer Systems Specialist Link Transit 509.664.7643 jobee(a)linktransit.com<mailto:jobee@linktransit.com>

2 2

Stacked and combined line graphs breaks after upgrading to 8889 stable
by Jesper Frank Nemholt 07 Dec '17

07 Dec '17

Hi! Upgraded and now it breaks the stacked and combined line graphs. The individual graphs themselves are OK. It seems to be across the board on all combined graphs and not specific to the example attached (custom OIDs for EMC Isilon) /Jesper

3 11

Fwd: FW: ALERT: [jaynet01a] [port] [Ethernet1/16] MoreThan80PortUtilizationOUT
by Edvinas K 07 Dec '17

07 Dec '17

Sometimes: when pressing on Alert Link, im getting: Unfortunately, this alert entry id does not seem to exist in the database! What could cause this ? Something with DB ? How to troubleshoot it ? Thanks *ALERT* Modify <http://netmon.adform.zone/device/device=223/tab=alert/alert_entry=261590/> *Alert* *MoreThan80PortUtilizationOUT* *Entity* *Ethernet1/16 <http://netmon.adform.zone/device/device=223/tab=port/port=344789/>* *Descr* FEX130A *Conditions* ifOutOctets_perc ge 80 (91) ifOutOctets_perc lt 100 (91) *Metrics* ifOutOctets_perc = 91 *Duration* 16m 3s (2017-12-06 14:46:35) Device *Device* *N <http://netmon.adform.zone/device/device=223/>exus01A* *Hardware* N5K-C5548UP *Operating System* Cisco NX-OS 6.0(2)N2(4) uk9 *Location* , Denmark *Uptime* 1 year, 28 days, 2h 49m 40s port_percent <http://netmon.adform.zone/graph.php?type=port_percent&id=344789> Observium Professional 17.11.8960 <http://www.observium.org>

1 0

Fwd: "sensor_class equals power" doesnt list a Nexus devices
by Edvinas K 07 Dec '17

07 Dec '17

Hello, I've created the Alert Checker with "sensor_class equals power" But i don't see any info about Nexus devices transceiver information. But for example - IOS XR devices shows transceiver information. Is it a problem wih NX-OS snmp stack ? Thanks.

1 0

Device names in Eventlog and Syslog Alerts.
by Peter Derissen 06 Dec '17

06 Dec '17

Hi, I noticed that some (longer) device names aren't showing complete in the eventlog and syslog alerts. Can i fix this some how? Also, is there a possibility to add colors (red,green) to the syslog alerts? Some screen shots. [cid:image003.png@01D36DEA.45D66650] [cid:image004.png@01D36DEA.45D66650] Regards, Met vriendelijke groet, Peter Derissen Eurofiber Nederland Network Engineer Safariweg 25-31 +31 (0)6 11587110 3605 MA Maarssen [EF-logo_rood_RGB -handtekening]<http://www.eurofiber.nl/> Volg ons op Twitter<https://twitter.com/Eurofiber> | Linkedin<https://www.linkedin.com/company/eurofiber> | Youtube<https://www.youtube.com/user/Eurofibergroup> [cid:image002.png@01D225FF.7ECDA420]<http://bit.ly/2eaBgRh> ******** IMPORTANT NOTICE ******** This e-mail (including any attachments) may contain information that is confidential or otherwise protected from disclosure and it is intended only for the addressees. If you are not the intended recipient, please note that any copying, distribution or other use of information contained in this e-mail (and its attachments) is not allowed. If you have received this e-mail in error, kindly notify us immediately by telephone or e-mail and delete the message (including any attachments) from your system. Please note that e-mail messages may contain computer viruses or other defects, may not be accurately replicated on other systems, or may be subject of unauthorized interception or other interference without the knowledge of sender or recipient. Eurofiber only sends and receives e-mails on the basis that Eurofiber is not responsible for any such computer viruses, corruption or other interference or any consequences thereof. Eurofiber Nederland B.V. is registered in the Chamber of Commerce of Amsterdam with number 34134377, VAT number NL 8088.51.524 B01.

4 10

Ekinops pre/post FEC Error counters
by Jay Hanke 05 Dec '17

05 Dec '17

Is anyone using Observium to monitor Ekinops DWDM error counters? Jay

2 2

Aggregate vs individual port graph maximum value & 95th % on bits graph
by Sean Pedersen 04 Dec '17

04 Dec '17

I have two graph questions that I haven't been able to get an answer on via IRC, so I thought this might be easier since I can include more information up front: 1st Question: A 2-port aggregate graph (agg_bits.png) shows a maximum value based on :AVERAGE while individual port graphs (port1_bits.png, port2_bits.png) for the ports that make up the aggregate show a maximum value based on :MAX. Is this intentional? If not, would it be possible to remove or toggle graphing average vs. maximum data on individual port graphs? I think both data points are useful, but in general when providing graphs the 5-minute average the only data we'd want to show them. More data below. 2nd Question: The "bits_old" graph includes 95th % both graphed and in the legend. Would it be possible to get the same for the other bits graphs, or at minimum, just bits? I did some digging and didn't find a means to use options via graphs.php to generate it myself. Question 1 data: An aggregate graph (bits) takes the :AVERAGE inbound and outbound of the two ports, using that data to create the graph and populate the legend (min/max/avg, etc.): DEF:in0=/opt/observium/rrd/dce01.01.mmr01/port-10.rrd:INOCTETS:AVERAGE DEF:out0=/opt/observium/rrd/dce01.01.mmr01/port-10.rrd:OUTOCTETS:AVERAGE DEF:in1=/opt/observium/rrd/dce02.01.mmr02/port-10.rrd:INOCTETS:AVERAGE DEF:out1=/opt/observium/rrd/dce02.01.mmr02/port-10.rrd:OUTOCTETS:AVERAGE The individual ports use both :AVERAGE and :MAX. DEF:outoctets=/opt/observium/rrd/dce01.01.mmr02/port-10.rrd:OUTOCTETS:AVERAG E DEF:inoctets=/opt/observium/rrd/dce01.01.mmr02/port-10.rrd:INOCTETS:AVERAGE DEF:outoctets_max=/opt/observium/rrd/dce01.01.mmr02/port-10.rrd:OUTOCTETS:MA X DEF:inoctets_max=/opt/observium/rrd/dce01.01.mmr02/port-10.rrd:INOCTETS:MAX (I didn't include all the CDEFs, AREAS, HRULES, etc. for brevity, but I have copies of each RRD command for reference, if needed.) The "Max" value in the legend reflects the :AVERAGE-based maximum on the aggregate graph and the :MAX-based maximum on the individual graph. Because of this, when compared side-by-side, the values do not match. Aggregate Max: p1_in: 118.25Mb p1_out: 31.95Mb p2_in: 40.15Mb p2_out: 2.61Mb Port 1 Max: p1_in: 304.39Mb p1_out: 98.77Mb Port 2 Max: p2_in: 90.94Mb p2_out: 14.05Mb -- Thanks, skpio

3 10

Seeing this because these two printers are talking to each other? (see pic)
by Kelley, Ronald E. 04 Dec '17

04 Dec '17

[cid:image001.png@01D36CDB.DD38EF50] Ronald Kelley Houston Methodist. Leading Medicine. Houston Methodist is ranked by U.S. News & World Report as the No. 1 hospital in Texas for patient care. Houston Methodist is nationally ranked in 8 specialties and is designated as a Magnet hospital for excellence in nursing. Visit us at houstonmethodist.org. Follow us at twitter.com/MethodistHosp and facebook.com/HoustonMethodist. ***CONFIDENTIALITY NOTICE*** This e-mail is the property of Houston Methodist and/or its relevant affiliates and may contain restricted and privileged material for the sole use of the intended recipient(s). Any review, use, distribution or disclosure by others is strictly prohibited. If you are not the intended recipient (or authorized to receive for the recipient), please contact the sender and delete all copies of the message. Thank you.

2 1

Observium Hardware requirements
by Juan Camilo 04 Dec '17

04 Dec '17

Hi Friends, My company has a PRO Subscription and we plan to implement Observium horizontally: - Dedicated MySQL DB - Dedicated RRD and web interface - Main Poller - Maybe Poller #2 We need your advice about hardware requirements to poll ~2500 devices and ~100.000 ports. Thanks, Juan Camilo Villamil B. Ingeniero Innovación Y Desarrollo Tic juan.villamil <mailto:juan.villamil@sti.com.co> @sti.com.co (+57 1) 7429797 Ext: 60181 Carrera 13 A No. 89-38 oficina 337 <http://www.stisas.com.co/> http://www.stisas.com.co

4 3

Ciena SAOS thresholds using incorrect OIDs
by Erik Muller 03 Dec '17

03 Dec '17

We recently added some Ciena 3942s and 3904s to our monitoring, and found that Observium (CE 17.9.8859) is picking up the wrong OID for some sensors. It seems that the same OID was reused for a couple of checks where they should have been the next in sequence, causing optics Tx power and voltage to not be properly checked. The below change syncs the checks with the correct MIB values, and fixed the false alarms it was generating for us. thanks, -e admin@nms:~$ diff -ub /opt/observium/includes/discovery/sensors/wwp-leos-port-xcvr-mib.inc.php.orig /opt/observium/includes/discovery/sensors/wwp-leos-port-xcvr-mib.inc.php --- /opt/observium/includes/discovery/sensors/wwp-leos-port-xcvr-mib.inc.php.orig 2017-02-01 11:31:13.983653739 -0500 +++ /opt/observium/includes/discovery/sensors/wwp-leos-port-xcvr-mib.inc.php 2017-02-01 15:39:05.687844414 -0500 @@ -59,7 +59,7 @@ foreach ($oids as $index => $entry) { $entry['descr'] = dbFetchCell("SELECT `ifDescr` FROM `ports` WHERE `device_id` = ? AND `ifName` = ?", array($device['device_id'], $index)) . " Tx power"; - $entry['oid'] = ".1.3.6.1.4.1.6141.2.60.4.1.1.1.1.105." . $index; + $entry['oid'] = ".1.3.6.1.4.1.6141.2.60.4.1.1.1.1.106." . $index; $entry['current'] = $entry['wwpLeosPortXcvrTxDbmPower']; $options = array('limit_high' => $entry['wwpLeosPortXcvrHighTxDbmPwAlarmThreshold'] * $scale, 'limit_low' => $entry['wwpLeosPortXcvrLowTxDbmPwAlarmThreshold'] * $scale, @@ -101,7 +101,7 @@ foreach ($oids as $index => $entry) { $entry['descr'] = dbFetchCell("SELECT ifDescr FROM `ports` WHERE `device_id` = ? AND `ifName` = ?", array($device['device_id'], $index)) . " Volts"; - $entry['oid'] = ".1.3.6.1.4.1.6141.2.60.4.1.1.1.1.16.".$index; + $entry['oid'] = ".1.3.6.1.4.1.6141.2.60.4.1.1.1.1.17.".$index; $entry['current'] = $entry['wwpLeosPortXcvrVcc']; $options = array('limit_high' => $entry['wwpLeosPortXcvrHighVccAlarmThreshold'], 'limit_low' => $entry['wwpLeosPortXcvrLowVccAlarmThreshold'],

2 1

Distributed-remote poĺlers (again)
by Edvinas K 30 Nov '17

30 Nov '17

Hello, I would like to know if there any plans or solutions to make Observium run in distributed poller setup ? Thanks

5 9

Alerts for an APC UPS
by Tim Vaughan 30 Nov '17

30 Nov '17

I want to generate alerts from our APC UPS. Mostly I want to be alerted it if goes onto battery backup power or if the battery needs replacing. Are these alertable? If so, does anyone have any example alert checkers they could share? Cheers, Tim

3 5

Grouping both ends of Core P2P links into single Graph
by Andrew Lemin 30 Nov '17

30 Nov '17

Hi, We are evaluating Observium at the moment, and we have many point-to-point links in our WAN as everyone should ;) Each end of the same p2p link is labeled to be identical; interface Te1/1/1 description CORE:DeviceA=DeviceB This results in two graphs in Observium. One for DeviceA (labelled "CORE:DeviceA=DeviceB") and one for DeviceB (labelled "CORE:DeviceA=DeviceB"). However as they are connected back-to-back to each other they show the exact same information (just "in" and "out" reversed obviously). Is it possible to merge these two ports/graphs into a single logical Core link? This would significantly save on screen real estate (halving the Core page at the least) and make tracing paths through the network much more logical. Similar to how the Customer graphs aggregate multiple ports with the same description together. But I guess throwing away one side of the link maybe? Details for each end could still be seen on the specific device's page to view locally significant things like port errors etc Thanks, Andy.

6 18

link dlink - hp lldp
by Raimundas Šlepikas 29 Nov '17

29 Nov '17

Hello 'Observium', why this link is not working, can you help me ? :) DGS-3120 to HP2610 -- Best regards, Raimundas mailto:raimis@kis.lt

4 4

Port Errors on Dashboard
by Travis Garrison 29 Nov '17

29 Nov '17

Is there a way to disable port errors on the dashboard for only our wireless radios? We would like to keep the errors of any switch ports that we might have. Thank you Travis Garrison

3 2

Removing some devices from eventlog
by Edvinas K 29 Nov '17

29 Nov '17

Hello, Is it possible to remove some devices from eventlog ?

1 0

Connecting to devices from Observium
by Mal Evans 28 Nov '17

28 Nov '17

Hi all - I've noticed that some of my devices display an option to connect directly via SSH etc. as per attached screenshot but unfortunately not all devices provide this option. I presume this is device dependent since it appears that my Cisco & Mikrotik devices display this option but not Huawei or my Brocade switches Is this an Observium config or device based? And if device based what config is required. Cheers Mal

2 1

Huawei Sub-interfaces - no traffic captured
by Mal Evans 27 Nov '17

27 Nov '17

Hi all - I've recently migrated a number of services to new Huawei kit and successfully discovered the device and all sub-interfaces etc. My problem is that Observium is not showing any traffic against any of the sub-interfaces. I can see the aggregated traffic fine but not at the sub interface level. I don't have the same problem on my older Cisco h/w Would appreciate any feedback on how to troubleshoot. Mal

2 1

device migration from SNMPv2 to SNMPv3
by Jan Horacek 22 Nov '17

22 Nov '17

Hi, I have a one question regarding migration devices in Observium from SNMPv2 to SNMPv3. I have in the Observium in this moment around 300 devices and want to use SNMPv3 instead of current SNMPv2c. Is here any procedure how I can do bulk change in Observium instead of removing and adding devices or do it manually? Thanks Jan

2 1

How to trigger of checkpoint FW state in observium?
by Steve Costaras 22 Nov '17

22 Nov '17

We're running observium pro stable release 17.10.8930 and are monitoring several checkpoint firewalls with it. I'm trying to figure out how to generate an alert when the firewalls fail over or when a state change occurs. I see that it's being polled as it's displayed for the device header. as you can see attached. This comes from checkpoint from the 1.3.6.1.4.1.2620.1.5.6.0 OID: SNMPv2-SMI::enterprises.2620.1.5.6.0 = STRING: "active" But I don't see any method to select that as an entity type? Anyone have any pointers?

3 2

some temperature sensor values are missing
by Edvinas K 22 Nov '17

22 Nov '17

Hello, Could you tell me why some FEXes temperature thresholds are missing ? Thanks [image: Inline image 2]

3 2

unable to display openvpn graphs
by Vikas Kumar 21 Nov '17

21 Nov '17

Hi all i have recently added my openvpn server to observium server for openvpn application monitoring. i have installed {{ xinetd and copied the openvpn script to }}/usr/lib/observium_agent/local/openvpn path. I have opened the openvpn server management port by adding 1st line as "management 10.100.115.220 49000 /etc/openvpn/pass.txt and then restarted openvpn and xinetd. When i checked using netstat on openvpn server the server is listening on tcp port 49000.{{}} i can access the management console of openvpn when i run the following command from my observium server "telnet 10.100.115.220 49000" followed by a password. But i cannot see the graphs of load and users connected in the Web GUI. I have checked RRD folder also of the device there is no rrd file named openvpn.rrd or so. The unix agent is already added to observium server and when i do "telnet 10.100.115.220 36602 | grep openvpn" then i get the following output : (nobody,223056,32312,0.2) /usr/sbin/openvpn --config vpn-routing.conf --daemon vpn-routing (nobody,195680,15056,2.3) /usr/sbin/openvpn --daemon --writepid /var/run/openvpn/vpn-bridge.pid --cd /etc/openvpn/ --config vpn-bridge.conf But i cannot see the graphs in web gui someone please help. Thanks -- <http://moodi.org/> *Vikas Kumar | ** Hospitality & PR Coordinator* *Mood Indigo, IIT Bombay* *+91-9694532954 | mailvikasnow(a)gmail.com <mailvikasnow(a)gmail.com>* [image: Facebook] <https://www.facebook.com/vikas.cse.iitb> ‌ <https://mailtrack.io/> Sent with Mailtrack <https://chrome.google.com/webstore/detail/mailtrack-for-gmail-inbox/ndnaehg…>

2 1

Unable to add Aruba Access points
by Vikas Kumar 21 Nov '17

21 Nov '17

i am using observium CE. i am unable to add Wireless access points from Aruba. They only talk to controller via snmp is it proprietary? thanks -- <http://moodi.org/> *Vikas Kumar | ** Hospitality & PR Coordinator* *Mood Indigo, IIT Bombay* *+91-9694532954 | mailvikasnow(a)gmail.com <mailvikasnow(a)gmail.com>* [image: Facebook] <https://www.facebook.com/vikas.cse.iitb> ‌ <https://mailtrack.io/> Sent with Mailtrack <https://chrome.google.com/webstore/detail/mailtrack-for-gmail-inbox/ndnaehg…>

3 3

Port Realtime function not work
by Nurbek Suleimanov 21 Nov '17

21 Nov '17

Hi, On one server running Realtime, on the second server an error is issued: "Your browser does not support SVG! You need to either use Firefox, or Chrome, or download the Adobe SVG plugin. "

1 0

apache monitor Hits/s confusion
by Satish Patel 20 Nov '17

20 Nov '17

I am using apache monitor and has confusion in stats : http://docs.observium.org/apps/ It is showing Hits/s where this numbers coming from? I looked at agent script but didn't get any value calculating Hits/s

1 1

Extreme Networks Syslog Configuration
by FE1009 FE-DDIS.dk 19 Nov '17

19 Nov '17

Hi I having problem configure Extreme Networks Syslog format to match observium filter, logs from linux and Cisco are working config from ExtremeXOS version 15.6.1.4 v1561b4 configure syslog add 192.168.x.y:514 vr VR-Default local6 enable log target syslog 192.168.x.y:514 vr VR-Default local6 configure log target syslog 192.168.x.y:514 vr VR-Default local6 filter DefaultFilter severity Debug-Data configure log target syslog 192.168.x.y:514 vr VR-Default local6 match Any configure log target syslog 192.168.x.y:514 vr VR-Default local7 format timestamp seconds date yyyy-mm-dd event-name none priority tag-name /Kennet

3 4