- observium - lists.observium.org

Unable to save sensor values
by Robert Williams 07 Oct '16

07 Oct '16

Hi, On devices with large numbers of sensors it appears that I'm unable to set custom limits any more. I'm sure there used to be something about a maximum number of rows to be updated (a SQL setting?) but I can't remember or find any reference of it. The path to the page is: /device/device=XXX/tab=edit/section=sensors/ I don't get any errors when applying, but, as soon as the page refreshes the old settings are back. In fact, any change on the sensors page fails (setting custom values, disabling alerts, enabled custom limits etc.). It works fine on all devices with lower numbers of sensors. These ASR9k have well over 150 I reckon, maybe more, it's hard to count. Anyway, can someone remind me of the SQL tweak for this? Or is this a bug? Cheers! Robert Williams Custodian Data Centre Email: Robert(a)CustodianDC.com http://www.CustodianDC.com

2 2

Restrict alerts to HA active F5 only
by Daniel Horth 06 Oct '16

06 Oct '16

Hi all I have an alert checker set up to monitor our F5 BIG-IP devices, alerting administrators if they forget to syncronise config after making changes. My alert looks like this: Device Match: * Entity Match: status_type equals f5-config-sync-state Test conditions (Require all): status_name notequals inSync status_name notequals standalone This is working great, however to reduce spamminess of alerts I am looking to only send the alert for the primary (HA active) device; when an additional status_type / condition match is true, i.e.: Entity Match: status_type equals f5-ha-state Test conditions: status_name equals active Is it possible to have alert checkers trigger based upon groups of entity matches like this? Am I approaching this in the wrong way? Thanks Dan

1 0

Syslog Alerts
by Brad Bendy 05 Oct '16

05 Oct '16

Hi, First off, the last few revisions have been killer, it's getting better every few weeks it seems, thanks! Ive setup some syslog alerts and I see under "syslog alerts" it will show a entry and "notified" will be no, then it appears after a few minutes this changes to yes and send the notification. It looks like it does not send the message until it sees more then X number of messages, It's sent after I get this in the logs: 2016-10-04 20:53:13Error (3)LAST message repeated 10 times 2016-10-04 20:52:47Error (3)LAST message repeated 7 times 2016-10-04 20:52:33Error (3)XNTPD NTP Server Unreachable Is this documented somewhere and Im missing it? Just trying to see when the message gets fired off. We were using some janky omprog code to send alerts that were "instant" but rather have Observium send them as it's much cleaner all around, but some alerts we want to get on the very first message and right away as they are critical. I noticed the syslog rules severity of a 8, im guessing eventually that will control how "sensitive" the alerts go out maybe? Thanks

1 0

CBQoS Issue & Temperature
by Talk Jesus 05 Oct '16

05 Oct '16

Hello First thing, does the attach show anything I need to be concerned about? The warnings, although 6 days ago I'm not understanding where they came from. These are new switches, all 3 fans installed and green lights. Airflow sufficient and cooled. Secondly, I have 3 ports showing a CBQoS error. I checked and see it's due to packet loss because of rate limiting policy set previously. Running Cisco 3650. I've removed the policies from each of the port's VLANs assigned over an hour ago and Observium is still showing as the policies in place? It polled ample times on all ports but not quite sure why it's still showing the policies and errors? I did notice at least that it showed no packet loss once I removed the policies, but the error bubble is still there and it still shows the policy name when viewing the CBQoS page for the ports. >From the Switch Switch2#conf t Enter configuration commands, one per line. End with CNTL/Z. Switch2(config)#int gi2/0/14 Switch2(config-if)#no service-policy output speed25 % policy map speed25 not configured Switch2#sh platform qos policies port Policy: None in the list Switch2#show run interface gi2/0/14 Building configuration... Current configuration : 113 bytes ! interface GigabitEthernet2/0/14 description Server 19 switchport access vlan 19 switchport mode access end

1 0

alerts
by Célia LAMY 04 Oct '16

04 Oct '16

Hello, I created three alerts for all of my servers. I'm not getting the alerts both servers. For others it works. How to do ? I use Observium CE 0.16.1.7533. Cordialement -- Célia LAMY Service Informatique ACTES SUD Place Nina Berberova, 13200 Arles Tél : 04 88 65 90 25

5 6

Billing update
by Eduardo Schoedler 04 Oct '16

04 Oct '16

Hi, I just added a port to a billing, so I imagine observium is going to calculate since today, right? However, today is day 3. How can I generate statistics for a specific billing since day 1? Thank you. Regards, -- Eduardo Schoedler

3 7

Alert on failed HDD
by Fredrik Winäs 04 Oct '16

04 Oct '16

Hi Did a test on a Linux (Ubuntu 16 on a Supermicro SYS-6017R-73HDP+) machine to see if we could get an alert when a HDD fails. The machine isn't using any RAID , just a plain mount of a partition to a mount point. I have configured IPMI in Observium to. The test (a bit brutal..) was to just remove the HDD when the server was ON. I did not see anything in Observium about the missing drive. What can I do so I can set up an alert checker notifying me about a failed drive? Will the unix_agent give me more info on this? Med Vänlig Hälsning Fredrik Winäs tel +46 31 762 02 43 fredrik.winas(a)cgit.se<mailto:fredrik.winas@cgit.se> www.cgit.se<http://www.cgit.se/> CGit AB Taljegårdsgatan 11C SE-431 53 Mölndal [cid:image001.png@01D21E53.0889E7A0]

1 0

Custom OID in observium community edition
by Janusz Janik 03 Oct '16

03 Oct '16

Hi, Is there any way to enable _custom oid_ option in observium community edition menu? Or is this option requires subscription version of observium? PS We use observium: > > Version Information > > *Observium CE* 0.16.9.8118 (30th September 2016) > Thank you for your response. Best regards, Janusz Janik -- Pozdrawiam, Janusz Janik

2 1

SLA : Search box/global search?
by Johann Mallet 30 Sep '16

30 Sep '16

Hello, It's possible to activate the SLAs search from the global search box? Another question : Search box in the SLA page is planned in the future? We have 2040 SLA (and many more in the future (>10k)). It's complicated for the support's guys :-) Thanks, Johann

2 2

Custom alerts without using checkers
by Andy Lemin 30 Sep '16

30 Sep '16

Hi, We have many custom scripts, and we would like those scripts to be able to send custom alerts into Observium. What is the best way to do this? We would not be able to use "Alert checks".. Or is there a special trap that we can use for this where we can define the Alert message string in the trap packet? Cheers, Andy.

1 0

Responsive Mode
by chad＠talkjesus.com 30 Sep '16

30 Sep '16

Anyone familiar with any possible mobile friendly, responsive them or even app? I searched intently and found only one app that hasn't been updated in years.

2 1

Wowza MIB
by Matt Vinson 30 Sep '16

30 Sep '16

How does one go about requesting MIB support? Or alternatively, adding MIB support manually to one's own server? Wowza Streaming Engine just recently added SNMP and developed their own MIB. It would be extremely useful for us to be able to monitor this application in depth. Documentation: https://www.wowza.com/forums/content.php?831-How-to-use-SNMP-in-Wowza-Strea… MIB: https://www.wowza.com/downloads/forums/snmp/WowzaStreamingEngineMIB.zip -- Regards, Matt Vinson TSS Digital Services matt.vinson(a)tssdigital.com 360.915.1100 --- This email has been checked for viruses by Avast antivirus software. https://www.avast.com/antivirus

4 4

email alert template tuning
by Boyard Engels 30 Sep '16

30 Sep '16

Hey Team, I am keen to reduce the information that is sent from Observium via the email alerts. Is there any information available on how to tune the alert emails? Thanks!! Bo

1 0

High CPU load on Cisco S500G Small business switches
by Jamie Tynan 29 Sep '16

29 Sep '16

Hi, We've noticed an issue with Cisco SG500 switches and Observium, where if you enable stacking mode (the default on the switch), regardless of if it is in a stack or not, the CPU reports a 50% average. Our investigations show it runs at 95% + for a couple of minutes whilst Observium is polling it, then drops back down to <10% when the query finishes. Turning stacking mode off drops the average CPU to <10% and CPU does not ramp up and down. We raised a case with Cisco TAC, who said this is "expected behaviour": >>> At every 5 min cycle, the CPU rises to 85- 95% temporarily and then drops down. The reason for this is, Observium is checking for interface status. When switch is in standalone mode the interface count database is the max switch capacity. Example 48 ports = 48 ports plus channel ports ~ 60 ports In stack mode the predefined port count in the data base is around 880 ports. While the switch is responding to SNMP get , it is using up resources and that is why the CPU utilization will be high. While I was testing it, I did not see or encountered any network outage or Web access issues. We have already made an enhancement request for this behaviour, to limit the port count to any stack configuration. >>> Has anyone else encountered anything similar? Adam - I realise that Observium is only polling what the switch is reporting, but if Observium can ascertain how many switches are in the stack, would it be possible to limit polling to only query active/connected stack members? Thanks, Jamie

2 4

Alcatel Lucent : Strange "Interface changed: [ifConnectorPresent]" flood
by Johann Mallet 29 Sep '16

29 Sep '16

Hello, I have many Alcatel Lucent routers in my backbone. Since I have add these routers, my eventlog is flooded by "Interface changed: [ifConnectorPresent]": http://img15.hostingpics.net/pics/712223floodalcatel.png I have 1274 eventlog pages for the router in example :-/ Do you have the same problem? Thanks, Johann

3 6

Using Obserivum on server with multiple interfaces/vlan?
by Johann Mallet 29 Sep '16

29 Sep '16

Hello, Simple question : We need upgrade our Observium deployment with multiple networks (public & private). Does Observium have any issue accessing nodes via more than one server interface? Whether two different physical ports or two different vlans on the same port? Some proprietary vendor NMS solutions are somehow locked to one interface only and cause great trouble. :o) Thanks, Johann

2 2

Bandwidth Reporting Off
by Talk Jesus 28 Sep '16

28 Sep '16

I’ve been using Observium for a while and there seems to be some discrepancies between my graphs and the upstream (my data center provides me Ethernet GigE bandwidth). For example, from around 8am to 12pm today it showed overall utilization pretty consistent well above 400Mbps. These switches are actually trunked (2 x 3650 L3 switches). In the graph, it shows the uplink to switch #2 connectivity calculated with the total utilization (VLAN2155). This is definitely not accurate as it shouldn’t do that as far I’m concerned. Total utilization should simply be Drops #1 & #2, which covers all VLANs on both switches. Example: Drop #1 = 40Mbps Drop #2 = 200Mbps Uplink to Switch #2 = 130Mbps Now as a result VLAN2155 (total utilization) is calculating not only #1 and #2 drops from the upstream, but even the trunk port labeled “Uplink to Switch #2”. I disabled polling on that uplink port and the total utilization (VLAN2155) is still far higher than what the output is for the past 24 hours from the upstream provider. They show 187Mbps past 24 hours (95th), 219M In / 202 Out. I show 266M In / 182M Out. Why is it so drastically different? Why is Observium calculating the “uplink” to the trunked 2nd switch in the total utilization graph? This is throwing off accuracy.

5 9

VRF/BGP/OSPF discovery in vrf-lite (nx-os)
by Stef Renders 28 Sep '16

28 Sep '16

Hi Does anyone know whether it is currently possible to discover bgp/ospf routing instances within a VRF on the NX-OS platform ? We migrated from IOS to NX-OS, IOS was passing them through snmp just fine. But NX-OS requires snmpv3 contexts for vrf resources. A full walk in the 'default-vrf' does not contain any metrics for the vrf's running on this VDC. The problem is more or less described here as well: https://github.com/librenms/librenms/issues/280 Kind regards Stef

4 6

Port Group / Entity Question
by Pico Leto 28 Sep '16

28 Sep '16

Hi, Can a port group contain multiple entities checks? I'm trying to just group our carriers for each location into port group. For instance I have our isp/carriers listed in the following format for the port descriptions on our routers L3:CKTID:DEMARC COG:CKTID:DEMARC My entity matches on either of those but when I combine them like the following below, I don't see any devices being associated with it. ifAlias matches *COG:* ifAlias matches *L3:*

2 1

Update Error
by Talk Jesus 28 Sep '16

28 Sep '16

Trying to update my CE from 15x to the latest http://www.observium.org/docs/updating/ Ran: cd /opt mv observium observium_old wget -Oobservium-community-latest.tar.gz http://www.observium.org/observium-community-latest.tar.gz tar zxvf observium-community-latest.tar.gz mv /opt/observium_old/rrd observium/ mv /opt/observium_old/*log* observium/ mv /opt/observium_old/config.php observium/ [root@rtg opt]# /opt/observium/discovery.php -u PHP Fatal error: require(): Failed opening required '/opt/observium/config.php' (include_path='.:/usr/share/pear:/usr/share/php') in /opt/observium/includes/sql-config.inc.php on line 26

4 9

Can't Hide Search
by Talk Jesus 28 Sep '16

28 Sep '16

Upgraded to latest CE version yesterday. Now the layout is different from 15x and the big search box on the left side of the port listing or device listing won't hide. I replicated this 2 browsers as well.

3 3

Re: [Observium] Cisco subinterfaces
by ron＠rjr-services.com 28 Sep '16

28 Sep '16

Yeah, that command. ;-) Get Outlook for Android On Wed, Sep 28, 2016 at 7:46 AM -0500, "Markus Klock" <markus(a)best-practice.se> wrote: -- This message has been scanned by E.F.A. Project and is believed to be clean.

1 0

Cisco subinterfaces
by Mirditor Kuçaj 28 Sep '16

28 Sep '16

Hello Lost the graphs on subinterfaces and portchannels. We rebooted a 7604 with IOS 15.4(3)S2 and monitored with Observium 0.16.9.8104. Somehow the graphs ID-are changed and doesnt belong to the same subinterface/portchannel. Thx Mirditor Kuçaj Backbone miri(a)abissnet.al <mailto:miri@abissnet.al> Abissnet Sh.a. +355 69 60 91 364 +355 (0)44 300 003 Ext 139 Rr. Ismail Qemali, Pallati Abissnet, Tiranë <http://www.abissnet.al/> www.abissnet.al <https://www.facebook.com/Abissnet> <https://plus.google.com/u/0/+AbissnetalISP> <https://www.linkedin.com/profile/view?id=AAIAABqLWRAB88ljU6t8b67oVm8PAlvPrh mPybE&trk=nav_responsive_tab_profile%20>

2 1

Re: [Observium] Cisco subinterfaces
by ron＠rjr-services.com 28 Sep '16

28 Sep '16

Please review this Cisco document regarding interface persistence. This is likely the issue you are seeing, not a problem with Observium itself. http://www.cisco.com/c/en/us/support/docs/ip/simple-network-management-prot… There is a command you can include in your configuration that will keep interface numbering persistent across reboots. I just don't recall it exactly off the top of my head, or I would include it here. ... Ron Get Outlook for Android On Wed, Sep 28, 2016 at 7:34 AM -0500, "Mirditor Kuçaj" <miri(a)abissnet.al> wrote: -- This message has been scanned by E.F.A. Project and is believed to be clean.

1 0

Trunk Issues
by Talk Jesus 28 Sep '16

28 Sep '16

I've been using Observium for a while and there seems to be some discrepancies between my graphs and the upstream (my data center provides me Ethernet GigE bandwidth). For example, from around 8am to 12pm today it showed overall utilization pretty consistent well above 400Mbps. I have two drops from them: primary and secondary (redundant). Plus, they both show active instead of active/passive. Not sure if that has anything to do with it. >From the tech: "95th percentile is calculated from both ingress and egress traffic. For example, if you used a constant 200Mbps up and down, then you would only be charged your commit of 200Mbps, not double. I do see what you mean that the two handoffs (layer 2) are equaling more than 300Mbps, but when you look at the Aggregate (layer 3) graph at the top, it does not go over 300Mbps. These packets can possibly be queued before going out so you don’t go over your commit. " So, what do you think might be causing this hiccup? I noticed this too: so these switches are actually trunked (2 x 3650 L3 switches). In the graph, it also shows the uplink connectivity calculated with the total utilization. This is definitely not accurate as it shouldn't do that. Example: Drop #1 = 40Mbps Drop #2 = 200Mbps Uplink to Switch #2 = 130Mbps Now as a result VLAN2155 (total utilization) is calculating not only #1 and #2 drops from the upstream, but even the trunk port labeled "Uplink to Switch #2". How can I rectify this with Observium to avoid that and get an accurate output?

5 11

Can't Add Device
by Talk Jesus 28 Sep '16

28 Sep '16

Trying to add my secondary trunked switch, but I get this error "Could not ping switch2.mydomain.com." I ran a DNS lookup on that hostname and it shows the records fine and the switch (#2) accurately. I tried adding the device using the same setup as the original switch that's already there: port 161, udp transport, v2c protocol version, snmp community same as primary. I can ping the hostname too, not sure why Observium cannot.

2 5

False positives on Device Alerts
by Timothy Kaufman 27 Sep '16

27 Sep '16

We have an SE installation with about 260 devices being checked. We have alerting setup for various services or checks. Often we see false positives on the SNMP device down alert, for example devices will report SNMP down when they are not really down. After a second or even third SNMP check we see a recovery and the uptime shows no outage. I also verify this by doing and snmpwalk from observium while the “alert” is active. Is there anything we can check or begin to look to find the cause. The server is not overloaded, with either memory or processor. We are running 25 poller wrappers with a complete polling time of about 300 seconds. Thanks, Tim

4 5

Poll Observium Agent using TLS
by Matthias Gabathuler 27 Sep '16

27 Sep '16

1 0

Observium with smokeping and rrdcached
by Lyndon Labuschagne 27 Sep '16

27 Sep '16

Hi is it possibly to get smokeping integrated with Observium if you are using rrdcached? I get permissions issues, but id I disable rrdcache then I can see the smokeping graphing?

1 0

Re: [Observium] Sensors auto-deleted and re-added.
by Henrik Cednert (Filmlance) 27 Sep '16

27 Sep '16

And now it have started to do it frequently. =( Never had this issue before. Anyone with a clue to why it’s happening? 2016-09-24 06:40:58 netbotz01 Sensor deleted: humidity apc memSensorsHumidity.0.4 Temp/humid 2016-09-24 06:40:58 netbotz01 Sensor deleted: temperature apc memSensorsTemperature.0.4 Temp/humid 2016-09-24 06:40:53 netbotz01 Temp/humid Sensor added: temperature apc emsProbeStatusProbeTemperature.4 Temp/humid 2016-09-24 06:40:53 netbotz01 Temp/humid Sensor added: humidity apc emsProbeStatusProbeHumidity.4 Temp/humid 2016-09-24 00:37:49 netbotz01 Sensor deleted: humidity apc emsProbeStatusProbeHumidity.4 Temp/humid 2016-09-24 00:37:49 netbotz01 Sensor deleted: temperature apc emsProbeStatusProbeTemperature.4 Temp/humid 2016-09-24 00:37:45 netbotz01 Sensor added: humidity apc memSensorsHumidity.0.4 Temp/humid 2016-09-24 00:37:45 netbotz01 Sensor added: temperature apc memSensorsTemperature.0.4 Temp/humid 2016-09-23 18:38:05 netbotz01 Sensor updated (limits): limit_low -> "0" 2016-09-23 12:40:44 netbotz01 Sensor deleted: humidity apc memSensorsHumidity.0.4 Temp/humid 2016-09-23 12:40:44 netbotz01 Sensor deleted: temperature apc memSensorsTemperature.0.4 Temp/humid 2016-09-23 12:40:40 netbotz01 Sensor added: temperature apc emsProbeStatusProbeTemperature.4 Temp/humid 2016-09-23 12:40:40 netbotz01 Sensor added: humidity apc emsProbeStatusProbeHumidity.4 Temp/humid 2016-09-23 06:38:32 netbotz01 Sensor deleted: humidity apc emsProbeStatusProbeHumidity.4 Temp/humid 2016-09-23 06:38:32 netbotz01 Sensor deleted: temperature apc emsProbeStatusProbeTemperature.4 Temp/humid 2016-09-23 06:38:28 netbotz01 Sensor added: humidity apc memSensorsHumidity.0.4 Temp/humid 2016-09-23 06:38:28 netbotz01 Sensor added: temperature apc memSensorsTemperature.0.4 Temp/humid -- Henrik Cednert cto | compositor Filmlance International | www.filmlance.se mobile [ + 46 (0)704 71 89 54 ] skype [ cednert ] On 2016-09-21, 14:05, "observium on behalf of Henrik Cednert (Filmlance)" <observium-bounces(a)observium.org on behalf of henrik.cednert(a)filmlance.se> wrote: Hey Anyone with an idea to why this would happen on its own? 2016-09-21 12:38:54 Sensor deleted: humidity apc emsProbeStatusProbeHumidity.4 Temp/humid 2016-09-21 12:38:54 Sensor deleted: temperature apc emsProbeStatusProbeTemperature.4 Temp/humid 2016-09-21 12:37:58 Temp/humid Sensor added: humidity apc memSensorsHumidity.0.4 Temp/humid 2016-09-21 12:37:58 Temp/humid Sensor added: temperature apc memSensorsTemperature.0.4 Temp/humid An APC/Schneider Netbotz200. Cheers -- Henrik Cednert cto | compositor Filmlance International | www.filmlance.se mobile [ + 46 (0)704 71 89 54 ] skype [ cednert ] _______________________________________________ observium mailing list observium(a)observium.org http://postman.memetic.org/cgi-bin/mailman/listinfo/observium

2 2

No devices found
by Skelkelos 25 Sep '16

25 Sep '16

Hi, I am having an issue with latest Observium release 0.16.9.8086 (9th September 2016), after updating to latest revision the discovery/polling is still working fine according to logs, however the web interface shows 'No devices found' and can't access any data. Any hints on how to solve this issue or investigate further ? Resetting the search parameters doesn't help. Best regards, Alessandro

2 5

Disabled devices showing on front page
by Ben Hohnke 25 Sep '16

25 Sep '16

Hi Guys, We updated our observium installation yesterday, and since then we're getting alerts (from the alert module) and front page alerts for devices that are disabled. The version we're running is 0.16.9.8092 (rolling). I really don't want to delete these devices, as the historical data is useful.. [image: pasted1]

3 3

Storage not showing all filesystems
by andres fariña 23 Sep '16

23 Sep '16

Hi All, I have an issue at this Observium version: *Observium* 0.16.8.8068 (23rd August 2016) *OS* Linux 3.0.101-0.7.17-default [amd64] (SUSE LINUX 11) *Apache* Apache *PHP* 5.6.9 (OPcache: ENABLED) *Python* 2.6.9 *MySQL* 5.6.27-log (extension: mysqli 5.0.11-dev) *SNMP* NET-SNMP 5.4.2.1 *RRDtool* 1.4.7 >From snmpwalk I can see filesystems: HOST-RESOURCES-MIB::hrStorageDescr.31 = STRING: / HOST-RESOURCES-MIB::hrStorageDescr.35 = STRING: /boot HOST-RESOURCES-MIB::hrStorageDescr.36 = STRING: /dev/shm HOST-RESOURCES-MIB::hrStorageDescr.41 = STRING: /audios/voicemails But at Observium I only got these two: Any ideas? Regards, Andrés

3 4

Port Alerts
by Peter Smith 23 Sep '16

23 Sep '16

Hi, I am not sure if this is the correct place to ask this question but I am interested in setting up alerts for key ports only. I have setup the example which shows Enabled ports which are currently down: Tests ifAdminStatus equals up ifOperStatus notequals up Entity Match ifType equals ethernetCsmacd However I cannot work out how to refine it further - such as trunk ports only or if the port description contains a string, such as "CORE". We would like to know when key ports go down only. I have tried adding: ifAlias equals *CORE* and similar configuration but I expect I have the syntax incorrect. The idea would be to alert on either ports containing a certain word in their description or on tagged/trunk ports. I also tried to find a location to search the old emails from this mailing list but have been unable to find it. Many thanks, Peter

2 2

Alert check for only one Nexus Fex modul
by Laszlo Nemeth 22 Sep '16

22 Sep '16

Hello I have a Nexus switch (hostname is sw01) with lot of FEX. I would like to check only one FEX (fex name is Fex-120) Die-1 temperature value. I go to Devices > Network and select „sw01” device, select Health > Temperature and there i see every FEX sensors. [cid:image001.png@01D214BB.99AFC980] So i would like to create a check for Fex-120 Die-1 if over 45C i would like to get an alert. I tried to create alert check but i am not able to set up correctly. This check get all of FEX temperatures: Device Match: hostname match sw01 Entity Match: sensor_class equals temperature Check Conditions: sensor_value greater 45 What i have to modofiy to get only the requested FEX’s Die-1 temperature? Thanks Laszlo

1 0

Sensors auto-deleted and re-added.
by Henrik Cednert (Filmlance) 21 Sep '16

21 Sep '16

Hey Anyone with an idea to why this would happen on its own? 2016-09-21 12:38:54 Sensor deleted: humidity apc emsProbeStatusProbeHumidity.4 Temp/humid 2016-09-21 12:38:54 Sensor deleted: temperature apc emsProbeStatusProbeTemperature.4 Temp/humid 2016-09-21 12:37:58 Temp/humid Sensor added: humidity apc memSensorsHumidity.0.4 Temp/humid 2016-09-21 12:37:58 Temp/humid Sensor added: temperature apc memSensorsTemperature.0.4 Temp/humid An APC/Schneider Netbotz200. Cheers -- Henrik Cednert cto | compositor Filmlance International | www.filmlance.se mobile [ + 46 (0)704 71 89 54 ] skype [ cednert ]

1 0

Problem with Alert Checker
by Patrick LAM 20 Sep '16

20 Sep '16

Anyone got this problem?? The measured should not over 100%?! [cid:image001.png@01D2133F.17437550] Best Regards, Patrick Patrick LAM Computer Officer Office of Medical Education Faculty of Medicine The Chinese University of Hong Kong Tel : (852) 2632 1437 Fax : (852) 2637 5470 Email : patrick(a)med.cuhk.edu.hk [35 Email Signature_4C]

2 1

Bls: observium Digest, Vol 74, Issue 8
by Radumalem Tarigan 17 Sep '16

17 Sep '16

Hi Adam & All, I got same problem with Fitriadi (below) for alerting with Telegram.Is there any way to change alert notification repetition for CE? Regards, Radu MT Pada Jumat, 9 September 2016 18:00, "observium-request(a)observium.org" <observium-request(a)observium.org> menulis: Send observium mailing list submissions to observium(a)observium.org To subscribe or unsubscribe via the World Wide Web, visit http://postman.memetic.org/cgi-bin/mailman/listinfo/observium or, via email, send a message with subject or body 'help' to observium-request(a)observium.org You can reach the person managing the list at observium-owner(a)observium.org When replying, please edit your Subject line so it is more specific than "Re: Contents of observium digest..." Today's Topics: 1. Notification via Telegram Messenger (Fitriadi Rustam) 2. Master-Search bar (Tomas) 3. Re: SNMP MIB Import (David Schrok) 4. Re: Master-Search bar (Mike Stupalov) 5. Re: Ubuntu 16 support? (Dano, Leo) 6. Enable HipChat Intergration (Stephen Bateman ( M5i Limited )) 7. Re: Enable HipChat Intergration (Adam Armstrong) 8. Re: tcp reset via http on some devices (Daniel Rolfe) 9. Re: SNMP MIB Import (Markus Klock) ---------------------------------------------------------------------- Message: 1 Date: Thu, 8 Sep 2016 19:11:56 +0700 From: Fitriadi Rustam <pipit.rustam(a)gmail.com> To: observium(a)observium.org Subject: [Observium] Notification via Telegram Messenger Message-ID: <CABJubyWnchVFDNjVdHNL_L25K3whZ6b=1a--xgUh_gqpC=UdQQ(a)mail.gmail.com> Content-Type: text/plain; charset="utf-8" hi all, currently i am using notification via telegram messenger for link down, the problem is when link down observium send notification every 5 minutes. is there a way to change notification repetition every one hour or notification when link down and up only. Thanks, Fitriadi

2 2

VLANs on Nexus C31128PQ
by Vater, Wolfgang 16 Sep '16

16 Sep '16

Hi, On my Nexus C31128PQ switch I do not get the VLANs into Observium. Instead it claims all ports are in VLAN 16777216. How can I help troubleshoot this? Wolfgang Wolfgang Vater | Lead Client Architect | Enterprise Services Unisys Deutschland GmbH GmbH | +49 162 255 9338 | wolfgang.vater(a)unisys.com | Philipp-Reis-Str. 2 | 65795 Hattersheim [unisys_logo]<http://www.unisys.com/> Unisys Deutschland GmbH | Geschäftsführer: Dr. Uwe Heckert | Sitz der Gesellschaft: Hattersheim | Amtsgericht: Frankfurt/Main HRB 73114 THIS COMMUNICATION MAY CONTAIN CONFIDENTIAL AND/OR OTHERWISE PROPRIETARY MATERIAL and is thus for use only by the intended recipient. If you received this in error, please contact the sender and delete the e-mail and its attachments from all computers. DIESE E-MAIL IST AUSSCHLIESSLICH FÜR DEN ADRESSATEN BESTIMMT UND KANN VERTRAULICHE INFORMATIONEN ENTHALTEN. Sollten Sie nicht der Adressat dieser Informationen sein, bitten wir Sie, sich mit dem Absender in Verbindung zu setzen und die Informationen von Ihren Endgeräten zu entfernen. [Grey_LI]<http://www.linkedin.com/company/unisys> [Grey_TW] <http://twitter.com/unisyscorp> [Grey_GP] <https://plus.google.com/+UnisysCorp/posts> [Grey_YT] <http://www.youtube.com/theunisyschannel> [Grey_FB] <http://www.facebook.com/unisyscorp> [Grey_UB] <http://blogs.unisys.com/>

1 0

Feature Request
by Serghei Golipad 16 Sep '16

16 Sep '16

Guys, Any chance to have something similar to Nectar plugin (for Cacti) integrated into Observium? Would be nice to have daily/weekly reports for specific graphs automatically emailed through? Cheers PLEASE CONSIDER THE ENVIRONMENT BEFORE PRINTING THIS EMAIL. CDW Limited is a Company registered in England and Wales. This email is sent for and on behalf of CDW Finance Holdings Limited. CDW Finance Holdings Limited is the UK holding company for CDW Limited trading as CDW. The registered office for CDW Finance Holdings Limited (Company Number 05872067) and its UK group undertakings is 10 Fleet Place, London, EC4M 7RB. VAT Registration 902 1949 39. Confidentiality: This e-mail contains proprietary information, some or all of which may be confidential and/or legally privileged. It is for the intended recipient only. If an addressing or transmission error has misdirected this e-mail, please notify the author by replying to this e-mail and then delete the original. If you are not the intended recipient you may not use, disclose, distribute, copy, print or rely on any information contained in this e-mail. You must not inform any other person other than CDW or the sender of its existence. For more information about CDW please visit www.uk.cdw.com

1 0

Netscreen VPN tunnel stats
by Daniel Rolfe 16 Sep '16

16 Sep '16

Hi all Just wondering Would it be possible using these VPN OIDs to get VPN tunnel details from our netscreen firewalls (os 6.2 and 6.3) into observium ? http://www.oidview.com/mibs/3224/NETSCREEN-VPN-MON-MIB.html Regards Daniel

1 0

Alert ifInOctets_perc doesn't match port ifInOctets_perc?
by Mailing Lists 15 Sep '16

15 Sep '16

Had a couple of utilisation alerts come through today reporting a 10Gig port as over 80% utilisation, when in reality it doesnt appear to be that busy?. The alert email shows this graph, showing over 100% utilisation and a solid 80+% most of the day: [image: Inline images 1] When you click through the embedded link to the 'real' graph in Observium itself, it reports the correct utilisation figures I would epxect to see based on the traffic graph: [image: Inline images 2] Traffic graph for the port: [image: Inline images 3] Are the alerts reading the information from a different rrd? Doesn't seem like it as the port would be alarming constantly based on the graph in the email as it shows over 80% for most of the day? Happy to accept that the port may have spiked to 8Gbps, but I would have thought this would have been reflected in the graphs somewhere but if anything traffic was tailing off? Is there possibly an issue with the alerting on ifInOctets_perc or do I need to be looking more closely at what the device is reporting, which on face value _seems_ OK looking at a debug of poller.php? Thanks, Tim C

5 11

Send logs to SIEM server
by Mike Khalil 12 Sep '16

12 Sep '16

hello, is there any way where I can setup Observium to send its logs to an SIEM system, primarily OSSIM? *Michael Khalil* | System Administrator *CONTROLTEC* 999 Republic Drive, Suite 100, Allen Park, MI 48101 *P* 313.438.5107 *F* 313.982.1305 *www.control-tec.com <http://www.control-tec.com/>* *This e-mail, and any attachments, is intended solely for use by the addressee(s) named above.* *It may contain confidential or proprietary information of Control-Tec LLC, its subsidiaries, affiliates or business partners.* *If you are not the intended recipient of this e-mail or are an unauthorized recipient of the information, you are hereby notified that any dissemination, distribution or copying of this e-mail or any attachments, is strictly prohibited.* *If you have received this e-mail in error, please immediately notify the sender by reply e-mail and permanently delete the original and any copies or printouts.* *Computer viruses can be transmitted via email.* *The recipient should check this e-mail and any attachments for the presence of viruses.* *Control-Tec LLC accepts no liability for any damage caused by any virus transmitted by this e-mail.*

1 0

Observium Network Mapping with real time traffic
by Sandvik Agustin 12 Sep '16

12 Sep '16

Hi, Just want to ask if does observium have this feature like network mapping with real time traffic monitoring like weathermap that used by the cacti or any similar to that? TIA :)

4 4

Any ideas how i maight chase down a near identical location ? [SEC=UNCLASSIFIED]
by Peter.Hine＠familycourt.gov.au 12 Sep '16

12 Sep '16

There is probably a space in it somewhere, that the location system detects but clicking on the location shows all 15 devices. (Embedded image moved to file: pic45025.gif) maybe an sql to pull out just the locations and device names ? thanks Peter Hine Senior Technical Support Engineer (Servers) Corporate Services | Federal Court of Australia ********************************************************************** The information contained in this e-mail (including any attachments) is for the exclusive use of the addressee. If you are not the intended recipient please notify the sender immediately and delete this e-mail. It is noted that legal privilege is not waived because you have read this e-mail. **********************************************************************

1 0

tcp reset via http on some devices
by Daniel Rolfe 09 Sep '16

09 Sep '16

Hi All, I'm not sure why only some devices are showing just a blank page or tcp reset Running latest CE Just wanting to know how one enables php errors to be displayed via the browser in observuim ? Regards, Daniel

4 7

Ubuntu 16 support?
by Dano, Leo 09 Sep '16

09 Sep '16

Hello all, I was able to add it to observium, it pulled up network and cpu but it's giving an error that it is down and it's not. Any thoughts? Thanks, ----------------------- Leo Dano

3 7

Re: [Observium] SNMP MIB Import
by David Schrok 09 Sep '16

09 Sep '16

Hello Markus, Any news or update on the pastebin output? Thank you in advance David Schrok Van: observium [mailto:observium-bounces@observium.org] Namens Markus Klock Verzonden: maandag 5 september 2016 09:22 Aan: Observium Network Observation System <observium(a)observium.org<mailto:observium@observium.org>> Onderwerp: Re: [Observium] SNMP MIB Import Oh, so you get the sensors in Observium but it shows them as wrong type of sensor? Then please attach a screenshot and run polling.php and discovery.php towards this device and use the -d flag for debug. example: ./discovery.php -h mydevice.com<http://mydevice.com> -d save the debug output to a pastebin or similar and give us the link :) /Markus 2016-09-05 9:15 GMT+02:00 David Schrok <dr.schrok(a)avans.nl<mailto:dr.schrok@avans.nl>>: Thak you for your reply. If I add a MIB, can it then make a difference between temp and humidity readout? Now all sensors of the new probe are shown in temperature. Met vriendelijke groet, David Van: observium [mailto:observium-bounces@observium.org<mailto:observium-bounces@observium.org>] Namens Markus Klock Verzonden: maandag 5 september 2016 07:52 Aan: Observium Network Observation System <observium(a)observium.org<mailto:observium@observium.org>> Onderwerp: Re: [Observium] SNMP MIB Import Hi David, Sadly just adding a MIB will not add support for a device, a SNMP MIB is only translating OID numbers, nothing more. Observium needs code written to actually support a new device, how much code depends on what kind of sensors you would like to support. /Markus 2016-09-05 7:37 GMT+02:00 David Schrok <dr.schrok(a)avans.nl<mailto:dr.schrok@avans.nl>>: Hello, Is there a wau to import MIB’s for devices that aren’t supported by Observium yet? I bought a new environment sensor which isn’t recognized by observium. I have the MIB’s, just don’t know how to import, if that is even possible. Any help? With Kind Regards, David Disclaimer ( http://www.avans.nl/over-avans/e-mail-disclaimer ) _______________________________________________ observium mailing list observium(a)observium.org<mailto:observium@observium.org> http://postman.memetic.org/cgi-bin/mailman/listinfo/observium Disclaimer ( http://www.avans.nl/over-avans/e-mail-disclaimer ) _______________________________________________ observium mailing list observium(a)observium.org<mailto:observium@observium.org> http://postman.memetic.org/cgi-bin/mailman/listinfo/observium Disclaimer ( http://www.avans.nl/over-avans/e-mail-disclaimer )

2 1

Enable HipChat Intergration
by Stephen Bateman ( M5i Limited ) 09 Sep '16

09 Sep '16

Hello All, Does anyone have a guide or tips on how-to add HipChat notification transport to observium? I can see it is supported however cannot find a way to add or enable it anywhere. Thanks Stephen

2 1

Master-Search bar
by Tomas 08 Sep '16

08 Sep '16

Hi all, we are using Observium as support tool and have some difficulties with search bar. If someone want to search a description like: Asia-mSwitchVRF_5 you have to fill all letters in one line, for example: mswitchvrf_5 , otherwise no result found. Event if you type "mswitch5" or "asia-mswitchvr5" nothing.. I think we are not alone with this problem here? And how to find ports from this place? https://dl.dropboxusercontent.com/u/8459860/Temp/Screenshot%20from%202016-0…

2 1