- observium - lists.observium.org

Observium Graph Issue
by Namdev Rathod 25 Sep '15

25 Sep '15

Hi, I have configured observium on aws ec2 instance, also add hosts in that with snmp installed. I have also tried to check with snmpwalk command on both side, its working fine. But issue with graph, on web interface of observium, i am not able to view graphs. Please help me. -- Thanks, Namdev Rathod

3 2

Observium boucing on ifalias
by Raphael Maunier 25 Sep '15

25 Sep '15

Hi there, We have a strange issue with the ifalias. We have one Juniper EX4550 with multiple customers on it. There was a bad character in the description : description "Cust: [FIBRE] {XXX} Paris - Zayo Cid:XXXXX Cable:R03110-fo-9-10�”; Observium was bouncing on the if desc. As soon as I change it, no bouncing . Not sure if it’s a bug report, but I just share it here :) Best, Raphael

1 1

add storage info to alert mail
by Casper Allerslev Jensen 24 Sep '15

24 Sep '15

Hi observiumers.. I have a storage_perc alert which sends me a nice email when my storage is above 95%. is it somehow possible to get the actuall storage used and left included in the mail. Since its a procentage there could still be potiential 50GB og free space left.. it all depends on the original size.

1 0

Graphing sum total of Current and Power
by Andrew Plas 24 Sep '15

24 Sep '15

Would it be possible to add a Total Graph for specific Heath statistics, similar to how the total graphs are displayed for Peering, Transit, and Core port types? What I am interested in is essentially adding values already collected by Observium from a handful of devices (rack PDU's) to determine the combined Current in amps and Power in watts to graph and track power consumption across an entire row or even datacenter. We can see this information per-rack from the PDU device already added to Observium, but for our datacenter managers it would be useful to track power consumption across the whole room or suite. In several of our POPs power is provided so we cannot poll the UPS itself- only our own rack PDUs connected to the facility's power bus. Even then, most have A and B side power so we have two PDUs per rack. To the end, I have created a device group by sensor sorting "pdu" device names and filtering for their output values. However, the built-in aggregate graphs show each device's data on one graph and doesn't combine them for a total. Further, my filter seems to pull many values labeled "Output" including voltage and amperage as well as wattage. Any suggestions to refine my filter to get one group for Amps and another for Watts? Please see the screenshots below. Most PDU's are APC model AP8941. I admit this would really only be useful for the "Power" and "Current" health monitors, as items like voltage and temperature are really only useful per-device. Even then, these total graphs would have the most value being filtered to a specific set of devices and likely by location. Maybe a total graph display under /groups may be more useful than one under /health/metric=power or /health/metric=current? Thank you! https://observium/group/group_id=6/ https://observium/group/group_id=6/view=basic/agg_graph=graph/

2 3

Alert notification
by Ondrej Beran 24 Sep '15

24 Sep '15

Hello, today I have updated version 6531 to 7038 and I still receive the same alert notification every 5 minute. Is it possible to change this notification to receive this alert only once when the service is down and than when it is renewed, not repeatedly ? defaults.inc.php $config['alerts']['interval'] = '31536000'; // How frequently to re-send a notification for a continuing alert condition // In seconds. Default is 1 day. Thank you Ondrej

5 7

Problem on syslog with HP devices
by Kleber C. S. Coelho 23 Sep '15

23 Sep '15

Dears, good morning! We have a problem in the syslog system. The logs of HP network equipment appear with a 'prefix' %% 10 in the attribute 'program' and this greatly hinders the display of logs and selecting the 'program' from the menu. Please could check this question for future updates? Hugs. 22-09-2015 13:52:10 core-dc Informational (6) %%10SHELL/6/SHELL_CMD(L) : -Task=vt0-IPAddr=**-User=**; Command is jumboframe enable 22-09-2015 12:16:33 core-pusp Notification (5) %%10CFM/5/CFM_SAVECONFIG_SUCCESS : Configuration is saved successfully. 22-09-2015 12:16:33 core-pusp Notification (5) %%10CFGMAN/5/CFGMAN_CFGCHANGED(L : -EventIndex=2-CommandSource=1-ConfigSource=2 is changed. 22-09-2015 11:52:57 core-eesc Notification (5) %%10IFNET/5/LINEPROTO_UPDOWN(L) : Line protocol on the interface Vlan-interface122 is UP. 22-09-2015 11:52:57 core-eesc Error (3) %%10IFNET/3/LINK_UPDOWN(L) : Vlan-interface122 link status is UP. []´s ________________ Kleber C. S. Coelho USP - São Carlos 16.3373-8870

1 0

Netscaler Virtual Machine!
by Svensson Fredrik A 23 Sep '15

23 Sep '15

Hi There! We have some Netscaler virtual appliances that doesnt show the Load Balancer Tab, any ideas why? [cid:image001.png@01D0F136.2381C6E0] Regards Fredrik Från: observium [mailto:observium-bounces@observium.org] För Svensson Fredrik A Skickat: den 15 september 2015 10:20 Till: Observium Network Observation System <observium(a)observium.org> Ämne: Re: [Observium] Alerting from eventlog? I dont seem to get this working for me, where does the Status_event comes from? Regards Fredrik Från: observium [mailto:observium-bounces@observium.org] För Andrew Plas Skickat: den 12 september 2015 05:00 Till: Observium Network Observation System <observium(a)observium.org<mailto:observium@observium.org>> Ämne: Re: [Observium] Alerting from eventlog? Thanks for the lead, Andre! I had to change the conditions to status_event equals alert and it works beautifully. On Fri, Sep 11, 2015 at 2:03 PM, Andre Geißler <andre(a)geisslermail.de<mailto:andre@geisslermail.de>> wrote: I did it that way Name: ASA Failover Test: status_event equals warning Device Match: hostname match blabla Entity Match: status_descr match *primary* Cheers, Andre _______________________________________________ observium mailing list observium(a)observium.org<mailto:observium@observium.org> http://postman.memetic.org/cgi-bin/mailman/listinfo/observium

3 4

Observium Support
by Mulenga Mumba 23 Sep '15

23 Sep '15

Hi, Please help me with support email address for Observium, I would like to request for customisation of some functions such as reports. Thanks, Mulenga Mumba, NOC Technical Supervisor Africonnect Zambia - A VODACOM Group Company Orange Park, Plot 35185, Alick Nkhata Road, Lusaka, Zambia Phone: +260 95 3 572 713 +260 211 843 298 Email: mulenga @africonnect.co.zm

2 2

Procedure for observium support.
by Chaman Rathee 23 Sep '15

23 Sep '15

I have a question that What is procedure to take support from observium? We have purchased a professional support subscription. It is valid upto 2016-09-07. ............. With Warm Regards, Chaman Rathee [Fabrikam] Privileged or confidential information may be contained in this message. If you are not the addressee indicated in this message (or responsible for delivery of the message to such person), please delete this message and kindly notify the sender by an emailed reply. Opinions, conclusions and other information in this message that do not relate to the official business of Progression and its associate entities shall be understood as neither given nor endorsed by them.

3 2

Port-Channels in Cisco devices
by Miguel Berniz 23 Sep '15

23 Sep '15

Hello, I installed community version through Turnkey appliance and drive a test with 25 network devices. Then I ran unto subscription version and I have noticed port-channel members are not appearing anymore in the port list, for example, in a 4500 VSS. The exaclly same devices are correctly showing port-channel and interface members top right column. What could this be caused by? Thanks in advance, Miguel

1 0

Connect via SSH Feature
by Johnson, Edward A. 22 Sep '15

22 Sep '15

Hopefully this is a newer feature, otherwise I totally overlooked this over the past year! [cid:ACFFBBBC-9380-48CA-9824-300B0B1F51C2] Is there a way to customize these connect commands? We have different usernames for our switches and linux boxes than the username that we log into Observium.

4 7

revision 7026. maps problem
by Andrew Colin 22 Sep '15

22 Sep '15

Hi Guys I did an svn up today and it upgrade to revision 7026(professional edition) But now the maps are all zoomed in(see below) Any idea why

3 4

Process to take Observium Support
by Chaman Rathee 22 Sep '15

22 Sep '15

Dear Team, Please suggest complete process to take support from observium. We have already purchased professional subscription. It is valid upto 2016-09-07. Kindly suggest process to take support. Please find attached file for your reference. ......... With Warm Regards, Chaman Rathee Mob. No. 9560055816 [Fabrikam] Privileged or confidential information may be contained in this message. If you are not the addressee indicated in this message (or responsible for delivery of the message to such person), please delete this message and kindly notify the sender by an emailed reply. Opinions, conclusions and other information in this message that do not relate to the official business of Progression and its associate entities shall be understood as neither given nor endorsed by them.

1 0

weather overlay
by Fernando Fuentes 22 Sep '15

22 Sep '15

Is there a way to the world map on the observium web ui? IE: http://openweathermap.org/maps Regards, -- Fernando Fuentes Supervisor & Senior Systems Administrator Email: ffuentes(a)aasteel.com American Alloy Steel, Inc. Houston, Texas Website: http://www.aasteel.com Phone: 713-744-4222 Fax: 713-300-5688

1 0

Observium :- Server location sign problem.
by Chaman Rathee 22 Sep '15

22 Sep '15

My some server are located at Gurgaon and rest are at Chennai location. Servers located at Gurgaon are showing green circle with no. of server in map. But Others located at Chennai are showing green google map pointer icon without no. of server. I want to do change Chennai location sign ( same as Gurgaon location) ? Location sign also enclosed with mail. Please check and help us. ......... Chaman Rathee [Fabrikam] Privileged or confidential information may be contained in this message. If you are not the addressee indicated in this message (or responsible for delivery of the message to such person), please delete this message and kindly notify the sender by an emailed reply. Opinions, conclusions and other information in this message that do not relate to the official business of Progression and its associate entities shall be understood as neither given nor endorsed by them.

2 1

SVN problems?
by Eduardo Schoedler 22 Sep '15

22 Sep '15

Hi, Is there some problem with svn server? root@lin:/opt/observium# svn update && ./discovery.php -h none -u Updating '.': svn: E000104: Unable to connect to a repository at URL 'http://svn.observium.org/svn/observium/trunk' svn: E000104: Error running context: Connection reset by peer Thanks. -- Eduardo Schoedler

2 2

Diff. b/t location sign and circle sign?
by Chaman Rathee 19 Sep '15

19 Sep '15

What is difference in location sign and circle sign on observe graph? Location Sign :- [cid:image001.png@01D0F2E9.76F4F090] Circle Sign :- [cid:image002.png@01D0F2E9.76F4F090] ............. With Thanks and Regards, Chaman Rathee MoB No. :- 9560055816 [Fabrikam] Privileged or confidential information may be contained in this message. If you are not the addressee indicated in this message (or responsible for delivery of the message to such person), please delete this message and kindly notify the sender by an emailed reply. Opinions, conclusions and other information in this message that do not relate to the official business of Progression and its associate entities shall be understood as neither given nor endorsed by them.

2 1

Observium host located at different location
by Chaman Rathee 19 Sep '15

19 Sep '15

Dear Team, My Observium hosts are showing at north atlantic Ocean where server is located at Gurgaon,India. SNMP Configuration file is /etc/snmp/snmpd.conf of host have only single blue line. rocommunity <community_name> [cid:image001.png@01D0F082.6FD9BDE0] Please suggest needful on priority basis. .......... With Warm Regards, Chaman Rathee Mob. No. :- +91-9560055816 [Fabrikam] Privileged or confidential information may be contained in this message. If you are not the addressee indicated in this message (or responsible for delivery of the message to such person), please delete this message and kindly notify the sender by an emailed reply. Opinions, conclusions and other information in this message that do not relate to the official business of Progression and its associate entities shall be understood as neither given nor endorsed by them.

4 10

Alerts
by Erwin Botas 19 Sep '15

19 Sep '15

Hi, we would like to filter alarms on our air conditioning units based on the status as many are redundant but the sensors are always on and if the unit is standby for example the temp or humidity limits can be easily raised, at his moment the sensors and status are different entities and the condition s can't be settled Any clue how to make this? Sent from my iPhone Erwin Botas Gerente tecnologías de información [http://www.criticalcolocation.com/firma/logo.jpg] Tel.: +506 2010-5050 • Cel.: +506 8982-4885 • Fax.: +506 2223-7055 San José, CR • www.criticalcolocation.com [http://www.criticalcolocation.com/firma/line.jpg] NOTA DE CONFIDENCIALIDAD: "La información contenida en este mensaje y sus adjuntos es estrictamente confidencial y se dirige exclusivamente a su destinatario. Si usted no es el destinatario indicado, cualquier divulgación, copia, distribución o uso del contenido de este documento es prohibido y será sancionado de acuerdo con la ley. Si recibió este mensaje por error, debe notificarlo de inmediato al remitente y destruirlo".

4 6

Disabling polling on large number of ports
by AJ Schroeder 18 Sep '15

18 Sep '15

Hello list, I have just added a bunch of our end user access switches to Observium (thanks to the devs adding Nortel support!). Anyway, I don't want to be alerted or notified if those particular ports go up or down. The only way I know how to stop alerting on ports is to toggle the alerts field in the ports properties of the specific device. However, whenever I select all the ports on a device that has a large number of ports (over 300) all the ports show that they are toggled to off, then I click save. When the page refreshes I only see about two-thirds of them are toggled off, the rest of them are still set to poll or alert. When I manually toggle some ports and click save, the setting doesn't save. Any help or insight on this would be appreciated. AJ Schroeder

4 7

added a HP server over snmp
by Casper Allerslev Jensen 18 Sep '15

18 Sep '15

Hi all, I have just added a HP server. added SNMP and set it up. The server connected fine to observium. Now i see Observium has support for HP but the data im getting is pretty mandatory server stuff so im wondering what the HP support is added? or did i do it wrong? As an example i was hoping to get some RAID info on the RAID 1 running on the server with the controller that was shipped. But all i see is C:\ which won't alert me if a disk fail.

5 11

odd install issue with the DB
by Lyndon Labuschagne 18 Sep '15

18 Sep '15

Hi I have no idea what I have done or missed? I have created the user and I can login to the observium database as the observium user, root@nms:/opt/observium# php includes/update/update.php $config['db_host'] = 'localhost'; $config['db_user'] = 'observium'; $config['db_pass'] = ’Not-The-Password'; $config['db_name'] = 'observium'; // Base directory $config['install_dir'] = "/opt/observium"; // Default community list to use when adding/discovering $config['snmp']['community'] = array(“public"); // Authentication Model $config['auth_mechanism'] = "mysql"; // default, other options: ldap, http-auth, please see documentation for config help // Enable alerter (not available in CE) #$config['poller-wrapper']['alerter'] = TRUE; MySQL Error: Access denied for user 'root'@'localhost' (using password: NO) If I try to load the page from my browser I see this $config['db_host'] = 'localhost'; $config['db_user'] = 'observium'; $config['db_pass'] = 'Not-The-Password'; $config['db_name'] = 'observium'; // Base directory $config['install_dir'] = "/opt/observium"; // Default community list to use when adding/discovering $config['snmp']['community'] = array(“public"); // Authentication Model $config['auth_mechanism'] = "mysql"; // default, other options: ldap, http-auth, please see documentation for config help // Enable alerter (not available in CE) #$config['poller-wrapper']['alerter'] = TRUE; MySQL Error: Access denied for user 'lyndonl'@'localhost' (using password: NO) Why it references my username via my browser is even more odd to me?

2 2

All obserdium devices are located at latitude 37.7463058 and longitude 37.7463058
by Chaman Rathee 18 Sep '15

18 Sep '15

Observium is showing my all server at :- R. Francisco de Arruda Furtado 6, 9500-605 Ponta Delgada, Portugal Latitude: 37.746306 | Longitude: -25.666857 This is default latitude and longitude in cinfig.php $config['geocoding']['default']['lat'] = "37.7463058"; // Default latitude $config['geocoding']['default']['lon'] = "-25.6668573"; // Default longitude .......... With Best Regards, Chaman Rathee Mob. No. +9109560055816 [Fabrikam] Privileged or confidential information may be contained in this message. If you are not the addressee indicated in this message (or responsible for delivery of the message to such person), please delete this message and kindly notify the sender by an emailed reply. Opinions, conclusions and other information in this message that do not relate to the official business of Progression and its associate entities shall be understood as neither given nor endorsed by them.

1 0

are page counts possible on a per user basis (in adressbook) of a Ricoh / Aficio MP c305 printer?
by ecaroh 17 Sep '15

17 Sep '15

We got an Aficio MP C305 Printer where we want to get a monthly automated report of printed pages (bw/color) based on a per user basis (addressbook / print code) to make a print accounting possible. We still can count total numbers (also of all in one types like fax, copy, print and divided in colour/bw counts), but no counts on a per user basis. Does anybody knows whether it is generally possible to have per user counts (based on printer addressbook and user print code) and if so is there an oid? We do not need that functionality directly in observium… cause this is not monitoring but reporting, but it would be nice to get them via snmp automated monthly. Thanks in advance. ecaroh — sample for known oids for getting overall general counters. ## AFICO PAGECOUNTERS OIDDEVTOTAL="SNMPv2-SMI::enterprises.367.3.2.1.2.19.5.1.9.1" OIDCOPYSW="SNMPv2-SMI::enterprises.367.3.2.1.2.19.5.1.9.3" OIDCOPYCL="SNMPv2-SMI::enterprises.367.3.2.1.2.19.5.1.9.5" OIDPRTSW="SNMPv2-SMI::enterprises.367.3.2.1.2.19.5.1.9.9" OIDPRTCL="SNMPv2-SMI::enterprises.367.3.2.1.2.19.5.1.9.11" OIDFAXSW="SNMPv2-SMI::enterprises.367.3.2.1.2.19.5.1.9.6" PRINTER="aio.office-factory.net“ after getting counters we make calculations with difference between now and the day before. Output via E-Mail: PAGES PRINTED SINCE 20150912 Total: 303 Print_SW: 134 Print_color: 78 Copy_SW: 45 Copy_color: 34 Fax_SW: 12

3 2

New Install Alerts Rebuild not Matching
by Cameron Murray 17 Sep '15

17 Sep '15

Guys, We've done a fresh install for a customer and created a sample offline rule however when we run the rebuild the output states it matched however under the alert checks the device count is still 0 We've just recreated the DB and all devices with the same outcome. [cid:image001.png@01D0F068.E9049100] [cid:image002.png@01D0F068.E9049100] Regards, Cameron Murray Remote Support Engineer How am I doing? Please click here<http://www.techpath.com.au/contact-us/feedback/> to rate my work. [cid:image003.png@01D0F068.E9049100]<http://www.techpath.com.au/> P 1300 033 300 F 07 3809 3999 E cameron(a)techpath.com.au www.techpath.com.au<http://www.techpath.com.au> Unit 2/55 Tradelink Rd, Hillcrest QLD 4118 Formerly Betta Computer Services Pty Ltd [Facebook]<http://www.facebook.com/techpathau> [Twitter]<http://twitter.com/techpathau> [LinkedIn]<http://www.linkedin.com/company/techpathau> Note: This message may contain privileged and confidential information that is the property of the intended recipient. The information herein is intended only for use of the addressee. If you are not the intended recipient, then you are requested to return e-mail to TechPath Pty Ltd and destroy any copies made. Copying or disseminating any of this message is prohibited. Any views expressed in this message are those of the individual sender and may not necessarily reflect the views of TechPath Pty Ltd.

3 5

geomapping stopped to work
by Alessandro Arciero 17 Sep '15

17 Sep '15

Hello, geomapping stopped to work after (I think) a svn update. With the same overidden (working well) location configured in about 100 devices, the new devices are not mapped (message: not found) the geolocalization is enabled. I solved with the lat, lot values. Attachements are self-explanatory :-) tnx alessandro arciero [cid:85329DA6-2C7B-48BA-9CD5-03F5D867586A][cid:C4A8EE78-1CD7-4576-81F8-F067C0AF8312] Alessandro Arciero Networking Management Multilink Friuli S.r.l. Attività di direzione e coordinamento Serenissima Partecipazioni S.p.A. Via Marconi 85 | 33010 Tavagnacco (UD), Italy One number/Tel. +39 0432 498511 | Fax +39 0432 498585 Email alessandro.arciero(a)multilinkfriuli.net<mailto:alessandro.arciero@multilinkfriuli.net> | www.multilinkfriuli.net<http://www.multilinkfriuli.net> Reg. Imprese di UD C.F./P.I. 02271850303 - R.E.A. di UD 248194 | Capitale sociale Euro 50.000,00 i.v. The information contained in this e-mail message and inside the respective attachments are confidential and reserved and are strictly for exclusively use by the intended recipient. The opinions therein and in case expressed, are those of the author: therefore the message doesn’t represent contractual commitment between Multilink Friuli S.r.l. and the recipient, and the company assume no responsibility regard the contents of the text and respective attachments, nor for any interception, changes or damages. Please don’t make copies, forward to thirds or conserve this message if you are not the right recipient. In case you incorrectly received this message, please resend to sender and erase it immediately and permanently from your personal computer.

4 6

Geolocation bugs
by Attila Nagy 17 Sep '15

17 Sep '15

Hi Adam and everyone! I have two small bugs to report. I'm using Observium CE 0.15.6.6430, I'm closely following the mail list, but if the below mentioned glitches/bugs were between solved, then sorry for wasting your time. 1. I had this problem for longer, but now I found the way to formulate it properly. We have sysLocation strings alike this: Qualitis Iroda / Iroda - 1131 Budapest, Béke utca 116 [47.541773,19.085868] Now when I check the "Geolocation" tab in the "Device Settings" I see following in the "Last Update Status": Geocoding ENABLED, try detect device coordinates: by REVERSE query (API: MAPQUEST, LAT: 47.541773, LON: 19.085868) - FOUND GEO API REQUEST: http://open.mapquestapi.com/nominatim/v1/reverse.php?format=json&accept-lan… GEOLOCATION: Hungary (Country), Unknown (State), Budapesti kistérség (County), Budapest (City) GEO COORDINATES: 47.54163 (Latitude), 19.0859 (Longitude) The problem as I see, is that after using the coordinates given in the sysLocation string to make a reverse query to lookup the Country, State, County etc., the geocoding API returns some coordinates which corresponds to THEIR found geolocation. But the geocoding API sometimes can give really offset coordinates, especially for some bigger sites, where it gives back the entrance. So if there are coordinates specified in sysLocation, then they should be used to pinpoint the device, no matter what the geocoding API says. PS: the documentation also says: "But observium anyway will store in DB specified coordinates." But this is currently not true. 2. I stumbled upon this while trying to get the data out of the Last Update Status Field for previous bug. The fields in the "Geolocation" tab in the "Device Settings" are marked with attribute disabled="disabled", and if something should be made writable, then this attribute is removed. I would suggest using the readonly attribute, as that would enable focusing and selecting from the given field. Not to mention the pure logic would tell the same, those fields are unmodifiable, so readonly should be used. Regards, Attila

2 2

Subinterfaces in "down" state
by Bjoern Engels 17 Sep '15

17 Sep '15

Dear list, Observium reports sub-interfaces as down even if the parents are administratively down, ex.: set interfaces ge-0/0/0 disable set interfaces ge-0/0/0 unit 0 family ethernet-switching port-mode \ access This raises an alert for ge-0/0/0.0 Is it possible to ignore sub-interfaces if the parents are admin down? BR Björn -- Bjoern Engels OpenIT GmbH engels(a)openit.de In der Steele 33a-41 PGP keyID 0x67504AC1 D-40599 Duesseldorf ________________________________________________________________________ HRB 38815 Amtsgericht Duesseldorf USt-Id DE 812951861 Geschaeftsfuehrer: Oliver Haakert, Maurice Kemmann

1 0

Missing memory history
by Jason Vanlandingham 17 Sep '15

17 Sep '15

I recently made some device changes and ran *discovery.php -h all* and *poller.php -h all*. Shortly after that I noticed that on one Windows 7 Pro box I'm monitoring, I no longer have any physical memory in the memory graph, just virtual memory. The entire history of it disappeared, and it hasn't started new or anything like that. I checked permissions on that workstation's rrd directory, and all looks good. I do have some backups of the rrd directories. Should I restore?

1 0

NOC display for specific Graphs
by Ron Culler 17 Sep '15

17 Sep '15

I'm looking to see if the ability exists to create a group with only a specific set of graphs based on an App. Then be able to assign that group to a user to view Ron Culler

5 12

RANCID integration
by Robbie Wright 17 Sep '15

17 Sep '15

Been hacking around with rancid for a bit and stuck on this step: Run this command to create the folder structure: su - rancid /var/lib/rancid/bin/rancid-cvs It is asking for a password, presumably for rancid, which we don't have. Again presuming here, that it was created by the installer. Trying hard to follow the instructions (exactly) and this is where I'm getting hung up. Thanks ahead of time for the help. Robbie Wright Siuslaw Broadband <https://siuslawbroadband.com> 541-902-5101

3 9

aacraid under linux
by Nikolay Shopik 17 Sep '15

17 Sep '15

Anyone running RAID within aacraid and have working snmp sub-agent? I had working snmp under windows machine, but that include installing storage manager, does same apply to snmpd under linux?

1 0

Fwd: Does observium support snapshot.
by Varun Nair (Tech-OPS) 16 Sep '15

16 Sep '15

Hey All, Firstly, a big kudos to observium and for making the life of a n/w engineer tad better. :) Now to my query, I have a Subscription Edition installed. Was wondering if there is a way to setup two instances say master/slave where the master polls the data and sends a periodic snapshot to the slave. This is basically for backups. Any pointers in this regard would be much appreciated. Feel free to revert if any questions. Thanks Varun Nair -- ------------------------------------------------------------------------------------------------------------------------------------------ This email and any files transmitted with it are confidential and intended solely for the use of the individual or entity to whom they are addressed. If you have received this email in error please notify the system manager. This message contains confidential information and is intended only for the individual named. If you are not the named addressee you should not disseminate, distribute or copy this e-mail. Please notify the sender immediately by e-mail if you have received this e-mail by mistake and delete this e-mail from your system. If you are not the intended recipient you are notified that disclosing, copying, distributing or taking any action in reliance on the contents of this information is strictly prohibited. Although Flipkart has taken reasonable precautions to ensure no viruses are present in this email, the company cannot accept responsibility for any loss or damage arising from the use of this email or attachments

5 5

Support for EMC Isilon & NetApp cDOT
by Jesper Frank Nemholt 16 Sep '15

16 Sep '15

Hi! I saw on an old thread that it's a know fact that NetApp cDOT doesn't work well, apparently due to changes in the MIB from NetApp so they don't use the normal structure anymore. A case was opened with NetApp.....was there any traction on that so far ? Secondly, with Isilon it does pull a lot of info by default, but due to Isilon using something called SmartConnect which basically is a round-robin DNS, if you use the cluster name you get a new node every time which confuses Observium quite a lot. Is there a way to make it somehow consolidate or average the data from all nodes in a cluster so I don't have to create each node individually ? /Jesper

1 0

Match for Cisco routers but not switches?
by Andrew Plas 16 Sep '15

16 Sep '15

I am looking to create an alert checker to send an alert when an Ethernet interface on a Cisco IOS router goes down- for example when the router is still up and available in monitoring, but a physical link is down due to a local switch failure, carrier CPE down, peer (unamanaged) router down... We receive syslogs of course, but these can occasionally get lost in the flood and not noticed as actionable by NOC staff. Is there an effective way to make a device match for Cisco routers, but not Cisco switches? The OS type both show up as "ios", and I haven't found something router-specific to successfully match on. I can do this individually by device name, but unfortunately our naming scheme isn't specific enough to match them all with *rt* or *wan or similar. As you can see below, I set the device match to "os equals ios" which includes switches that have a ton of link-down-but-enabled ports on them! Thank you, Andrew [image: Inline image 2]

7 10

Show client *rate* on wireless clients graph
by Tim Vaughan 16 Sep '15

16 Sep '15

I'm using Observium to track wireless clients on our Cisco wireless controller. It's very useful. However, when I look at the longer-term graphs (monthly, yearly etc.) it's less useful because I'm not sure what it's showing. Is it clients per day, per week or what? For an example, see: https://dl.dropboxusercontent.com/u/3183918/apelmRwNW7.png. Is there a way to get the legend show the rate rather than just a plain number? -- Mobile: 07868246225 Skype: tvaughan Twitter: twitter.com/tvaughan

2 3

Re: [Observium] observium Digest, Vol 62, Issue 103
by Nate Mellendorf 16 Sep '15

16 Sep '15

Adam, That makes sense. As much as modern technology makes it seem otherwise, someone always needs to spend the time and code it into existence. With the mibs, is it something we would expect to see in time? Is there a way we could help expedite the coding process? I'm curious if there's a way we can contribute to your efforts. If so, please let me know. I'd be happy to take it to my team. We've discussed it once already, and would really like to see additional stats on our kemps. Thank you! Nate Mellendorf | NETWORK ANALYST | Netgain 720 West Saint Germain Street | St. Cloud | MN | 56301 Phone: 320.251.4700 x183 | 877.797.4700 x183 www.NetgainHosting.com The information contained in this email message is for the designated recipient only and may be privileged, confidential, and protected from disclosure. If you have received this message in error, please notify the sender immediately and delete the original. Any dissemination, distribution, copying or other use of this message or any information contained within is strictly prohibited. -----Original Message----- From: observium [mailto:observium-bounces@observium.org] On Behalf Of observium-request(a)observium.org Sent: Tuesday, September 15, 2015 1:02 PM To: observium(a)observium.org Subject: observium Digest, Vol 62, Issue 103 Send observium mailing list submissions to observium(a)observium.org To subscribe or unsubscribe via the World Wide Web, visit http://postman.memetic.org/cgi-bin/mailman/listinfo/observium or, via email, send a message with subject or body 'help' to observium-request(a)observium.org You can reach the person managing the list at observium-owner(a)observium.org When replying, please edit your Subject line so it is more specific than "Re: Contents of observium digest..." Today's Topics: 1. Re: KEMP MIBs Attached (Adam Armstrong) ---------------------------------------------------------------------- Message: 1 Date: Tue, 15 Sep 2015 19:02:00 +0100 From: Adam Armstrong <adama(a)observium.org> To: Observium Network Observation System <observium(a)observium.org> Subject: Re: [Observium] KEMP MIBs Attached Message-ID: <14fd22ba5c0.2779.11b54b3dd25b712395dab9818c67596f(a)observium.org> Content-Type: text/plain; charset="utf-8"; Format="flowed" Hi, MIBs are only a small part of the process. Code needs to be written to support new things. Adam. Sent with AquaMail for Android http://www.aqua-mail.com On 15 September 2015 6:44:20 pm Nate Mellendorf <Nate.Mellendorf(a)netgainhosting.com> wrote: > Team, > > I've attached the MIBs that can be found on the KEMP load master > support page. > > Do you know if it's possible to have these added to Observium? > Observium works great for Netscaler, so we're hoping it can do the > same for Kemp. > > I'm not sure if that's possible with what's provided, but I thought > I'd send it your way and see what can be made of it. > Please let me know if additional info is needed. > > Regards, > > Nate Mellendorf | Network Analyst | Netgain > 720 West Saint Germain Street | St. Cloud | MN | 56301 > Phone: 320.251.4700 x183 | 877.797.4700 x183 > <http://www.netgainhosting.com/> www.NetgainHosting.com > > > _____ > > The information contained in this email message is for the designated > recipient only and may be privileged, confidential, and protected from > disclosure. If you have received this message in error, please notify > the sender immediately and delete the original. Any dissemination, > distribution, copying or other use of this message or any information > contained within is strictly prohibited. > > > > > ---------- > _______________________________________________ > observium mailing list > observium(a)observium.org > http://postman.memetic.org/cgi-bin/mailman/listinfo/observium >

1 0

KEMP MIBs Attached
by Nate Mellendorf 16 Sep '15

16 Sep '15

Team, I've attached the MIBs that can be found on the KEMP load master support page. Do you know if it's possible to have these added to Observium? Observium works great for Netscaler, so we're hoping it can do the same for Kemp. I'm not sure if that's possible with what's provided, but I thought I'd send it your way and see what can be made of it. Please let me know if additional info is needed. Regards, Nate Mellendorf | Network Analyst | Netgain 720 West Saint Germain Street | St. Cloud | MN | 56301 Phone: 320.251.4700 x183 | 877.797.4700 x183 <http://www.netgainhosting.com/> www.NetgainHosting.com _____ The information contained in this email message is for the designated recipient only and may be privileged, confidential, and protected from disclosure. If you have received this message in error, please notify the sender immediately and delete the original. Any dissemination, distribution, copying or other use of this message or any information contained within is strictly prohibited.

2 1

After server-deletion, I have a dis-associated port shown as down
by Pål Rydningen 15 Sep '15

15 Sep '15

Hi I have deleted a server from the device-list, but somehow a single port escaped the deletion, and is now shown as "Port Down" without being attached to any device. Its called "Vmnic1" and the url to it is " http://observium-ip/device/tab=port/port=352173/" How can I identify and "clean up" the entry in question? -- Pål R.

2 1

View and Sound for NOC Dashboard
by chott＠praha1.net 15 Sep '15

15 Sep '15

Hello Team, We are plaining show Observium Dashboard to Plasma TV Can i change Default Views? Can observium start Sound Alarm for new down device Same like in Cacti? Tom

3 2

Graphs not drawing. Values show as -nan
by Yaad Taieb 15 Sep '15

15 Sep '15

Hi all, I went through the archive for 3 consecutive days, and tried the following steps there outlined. None of which has helped my situation. Its run on: Ubuntu 14.04 All the dependencies have been downloaded as you can see: imagemagick is already the newest version. mtr-tiny is already the newest version. php5-json is already the newest version. python-mysqldb is already the newest version. rrdtool is already the newest version. whois is already the newest version. fping is already the newest version. php5-mcrypt is already the newest version. graphviz is already the newest version. libapache2-mod-php5 is already the newest version. mysql-client is already the newest version. mysql-server is already the newest version. php-pear is already the newest version. php5-cli is already the newest version. php5-gd is already the newest version. php5-mysql is already the newest version. snmp is already the newest version. subversion is already the newest version. ipmitool is already the newest version. Screenshots: php.config: http://i61.tinypic.com/99q72r.png apache2 000-default.conf: http://i59.tinypic.com/m8k7sx.png ./poller.php -h all -d: http://i59.tinypic.com/ok4k5h.png ./discovery.php -h all -d: http://i60.tinypic.com/2rwnbc7.png This is what Observium actually looks like after following all the steps in the installation guide: http://i62.tinypic.com/14ndcw7.png First time working with Ubuntu and php, well, first time working with everything that was outlined in the installation guide. So bear with me Thanks!

5 8

Re: [Observium] Bug concerning text with special characters
by Aurélien PERRODY 15 Sep '15

15 Sep '15

Pb solved by changing geocoding api (from Mapquest to Google) Thanks for support Aurélien De : observium [mailto:observium-bounces@observium.org] De la part de Tom Laermans Envoyé : mardi 15 septembre 2015 09:59 À : Observium Network Observation System <observium(a)observium.org> Objet : Re: [Observium] ***SPAM*** Re: Bug concerning text with special characters Hi Aurélien, Did you do a reset of the geolocation? Once it's geolocated with the UTF-8 issue, it'll probably stay wrong in the database until we try to geo-locate it again. Tom On 15/09/2015 09:26, Aurélien PERRODY wrote: Hello Mike Thanks but still the same issue. I'm currently running the version 0.15.9.7000 (15th September 2015) Just added 3 screenshots to this mail to show you the problem. Maybe it's a MAPQUEST API related issue? Thanks Best, Aurélien De : observium [mailto:observium-bounces@observium.org] De la part de Mike Stupalov Envoyé : lundi 14 septembre 2015 17:54 À : observium(a)observium.org<mailto:observium@observium.org> Objet : Re: [Observium] Bug concerning text with special characters Hi, On 14.09.15 11:09, Aurélien PERRODY wrote: Hello Observium team, Just found a little bug concerning text with special characters, as attached with this message. It's strange because the text is correctly displayed just below. And the result is all my devices are not in the same group, I cannot do something because the regional settings are automatically filled and managed by Observium, from the name of the town (as I set in the snmp parameters of my devices). Can you check this point ? All UTF-8 related issues should be already fixed since r6839 (Professional). For CE wait next release. Thanks, best Aurélien _______________________________________________ observium mailing list observium(a)observium.org<mailto:observium@observium.org> http://postman.memetic.org/cgi-bin/mailman/listinfo/observium -- Mike Stupalov http://observium.org _______________________________________________ observium mailing list observium(a)observium.org<mailto:observium@observium.org> http://postman.memetic.org/cgi-bin/mailman/listinfo/observium

1 0

Alerting from eventlog?
by Svensson Fredrik A 15 Sep '15

15 Sep '15

Hi there! Is it possible to create an alert from the evenlog? Log message: 15d 20h 39m FAILOVER<http://jkpobservium01/device/device=1003/tab=port/port=155956/> Interface changed: [ifPhysAddress] '0025b3d7e06e' -> '0025b3d7e128'; [ifLastChange] '2015-04-21 20:47:50' -> '2015-06-02 16:17:43' I want to know if my Cisco ASA:s does an failover. Regards Fredrik

4 6

Bug concerning text with special characters
by Aurélien PERRODY 15 Sep '15

15 Sep '15

Hello Observium team, Just found a little bug concerning text with special characters, as attached with this message. It's strange because the text is correctly displayed just below. And the result is all my devices are not in the same group, I cannot do something because the regional settings are automatically filled and managed by Observium, from the name of the town (as I set in the snmp parameters of my devices). Can you check this point ? Thanks, best Aurélien

4 5

Interface alerts
by Jeffrey d'Ambly 15 Sep '15

15 Sep '15

I’m using Observium Enterprise, and I have an interface that is running close to 100% traffic that I would like to ignore. This interface is a network tap/span for our IDS device. What can I do in the alert checker to ignore alerts from this interface? —Jeff

2 3

Error Drawing Graph
by Chip Pleasants 15 Sep '15

15 Sep '15

Hi All, I'm seeing "error drawing graph" on several of our Cisco ASR's interfaces, so I'm hoping someone coupe point me in the right direction. I'm running Centos 6.6 with the latest rrdtool rrdtool-1.3.8-7.el6-x86_64 and CE version 0.15.6.6430. I've removed the specific graph rrd file then run the following two commands for debugging purposes. php ./discovery.php -d -h router.local.com php ./poller.php -d -h router.local.com. The file is 0 bytes for some reason. Oddly enough two of the three interfaces issues are with BDI interfaces. The weird part is there is one BDI interface on each box that is displaying correctly. Let me know if you any anything else to assist in troubleshooting. Thanks, Chip Port BDI3004(62) replacing with 64-bit... dot3Duplex, VLAN == TELECOM TRANSIT // CID: // CONTACT: ifInOctets (583452815 B) 2244049.2884615 Bps 260 secs ifOutOctets (34747474 B) 133644.13076923 Bps 260 secs ifInErrors (0 B) 0 Bps 260 secs ifOutErrors (0 B) 0 Bps 260 secs ifInUcastPkts (5021371 B) 19312.965384615 Bps 260 secs ifOutUcastPkts (50407 B) 193.87307692308 Bps 260 secs bps(17.9Mbps/1.07Mbps)bytes(556MB/33.1MB)pkts(19.3kpps/193pps)RRD[%g/usr/bin/rrdtool create /opt/observium/rrd/router.local.com/port-62.rrd \ DS:INOCTETS:DERIVE:600:0:12500000000 \ DS:OUTOCTETS:DERIVE:600:0:12500000000 \ DS:INERRORS:DERIVE:600:0:12500000000 \ DS:OUTERRORS:DERIVE:600:0:12500000000 \ DS:INUCASTPKTS:DERIVE:600:0:12500000000 \ DS:OUTUCASTPKTS:DERIVE:600:0:12500000000 \ DS:INNUCASTPKTS:DERIVE:600:0:12500000000 \ DS:OUTNUCASTPKTS:DERIVE:600:0:12500000000 \ DS:INDISCARDS:DERIVE:600:0:12500000000 \ DS:OUTDISCARDS:DERIVE:600:0:12500000000 \ DS:INUNKNOWNPROTOS:DERIVE:600:0:12500000000 \ DS:INBROADCASTPKTS:DERIVE:600:0:12500000000 \ DS:OUTBROADCASTPKTS:DERIVE:600:0:12500000000 \ DS:INMULTICASTPKTS:DERIVE:600:0:12500000000 \ DS:OUTMULTICASTPKTS:DERIVE:600:0:12500000000 --step 300 RRA:AVERAGE:0.5:1:2016 RRA:AVERAGE:0.5:6:2976 RRA:AVERAGE:0.5:24:1440 RRA:AVERAGE:0.5:288:1440 RRA:MIN:0.5:6:1440 RRA:MIN:0.5:96:360 RRA:MIN:0.5:288:1440 RRA:MAX:0.5:6:1440 RRA:MAX:0.5:96:360 RRA:MAX:0.5:288:1440 %n] rrd_dontneed: Argument 'rrd_file' is NULL. RRD[cmd[update /opt/observium/rrd/router.local.com/port-62.rrd N:2646180175082:22831627397426:0:0:22904108823:35248380163:0:0:0:0:0:0:0:0:0] stdout[ERROR: mmaping file '/opt/observium/rrd/router.local.com/port-62.rrd': Invalid argument] stderr[]]

2 3

Initial setup on UIbuntu - SQL syntax error when creating the observium DB
by Reuben Sankey 15 Sep '15

15 Sep '15

Hi, Im setting up Observium on ubuntu server 14.04.1 LTS. Using the guide: http://www.observium.org/docs/debian_ubuntu/ All going well until I get to the SQL database bit and have issues: mysql -u root -p <mysql root password> mysql> CREATE DATABASE observium DEFAULT CHARACTER SET utf8 COLLATE utf8_general_ci; mysql> GRANT ALL PRIVILEGES ON observium.* TO 'observium'@'localhost' -> IDENTIFIED BY '<observium db password>'; I assume the <observium db password> is to be replaced with a password? [image: Inline image 1] Thanks and regards, Reuben

4 14

how to create a monitoring to mysql and ms sql on windows machine using observium ?
by noc.rodrigo.araujo＠itmnetworks.com.br 15 Sep '15

15 Sep '15

Hello All, we have one way to monitoring mysql4, mysql5 and mssql server that we have on windows 2003 32bit, 2008R2 64Bit and 2012R2 ? i talking about same type of monitoring that we have observium monitoring mysql5 on Linux machine using unix agent any friend have one tutorial about this ? thanks, Rodrigo Araujo

1 0

Filter syslog messages
by Andre Geißler 15 Sep '15

15 Sep '15

Hi When trying to filter syslog messages by program for Cisco ASA messages (%ASA-2-106017) I get an bad request from apache due to the % sign. The url called ishttp://observium/syslog/program=%25ASA-2-106017/ Regards Andre

1 0

changing device link in alert email from http to https
by Casper Allerslev Jensen 14 Sep '15

14 Sep '15

Hi all, I will be accessing my observium from the outside. Therefore i have installed my wildcard cert and enabled https... my problem is when i recive the alert email from observium for some machine. in the email there is a link under device so that i can easily access the server and see what is wrong. my problem is per default the url starts with http and not https. and so the tunnel is not encrypted. How do i change this behaviour?

2 4