- observium - lists.observium.org

Email Alert setup
by Darian Jimenez 08 Sep '14

08 Sep '14

Hello, I was able to get some alert checks going but email doesn't seem to be working. When I try the test_mail.php script it eventually times out giving me the following. ./test_mail.php -h fwtec.sup.domain.local Sending test notification for fwtec.sup.domain.local...Mailer Error: Failed to connect to myemailserverl.protection.outook.com:25 [SMTP: Failed to connect socket: Connection timed out (code: -1, response: )] done. my config.php has the following for email settings. $config['alerts']['email']['default'] = "xxx@mydomain"; $config['email_from'] = "Observium <observium(a)mydomain.com>"; $config['email_backend'] = "smtp"; $config['email_smtp_host'] = 'mymaildoman.protection.outook.com'; $config['email_smtp_port'] = 25; $config['alerts']['email']['enable'] = TRUE; $config['email_smtp_auth'] = TRUE; $config['email_smtp_username'] = 'xxx@mydomain'; $config['email_smtp_password'] = 'xxxx'; $config['email_smtp_timeout'] = 10; I am able to successfully telnet to my email server on port 25 but can't seem to send. What am i Missing?

3 7

Port errors
by Darian Jimenez 05 Sep '14

05 Sep '14

I just saw I had a warning on port errors and looked at it. It is monitoring a Juniper switch interface. From the legend I can't tell what the "m" stand for for the y axis. would this be resource errors from the switch interface stats? Errors: 275, Drops: 0, Framing errors: 275, Runts: 0, Policed discards: 0, L3 incompletes: 0, L2 channel errors: 0, L2 mismatch timeouts: 0, FIFO errors: 0, Resource errors: 11740453 Thanks, Darian

3 3

Empty graphs
by Joel 05 Sep '14

05 Sep '14

Hi all, just installed Observium CE 0.14.4.5229 on a CentOS 6.5 64bits in VMware Workstation 9 environment : no problem thanks to well done install procedure (http://www.observium.org/wiki/RHEL_Installation); added manually network devices via following commands with no errors : ./add_device.php xxx.xxx.xxx.xxx ./discovery.php -h all ./poller.php -h all crontab updated as stated in install procedure ; Everything seems OK during all these steps ; When looking at the results via web interface, I can see all (CISCO here) devices with all their discovered characteristics (type/model, soft version, interfaces, % RAM, % CPU, thruput figures on interfaces, ...) but no graph is drawn at all (even after 4 hours) ; by the way, the graphs legends are correclty, and the grids too, but no curve drawn; when looking at /opt/observium/rrd directory, I can see a sub-dir created per each disvovered device and inside each of them, 1 RRD file created for each collected variable ; (each device RRD subdir is about 40MB after a while, RRD files inside are not empty) Any idea to investigate more about those empty graphs ? thanks for any help

4 5

wrong post
by Joel Guillerm 05 Sep '14

05 Sep '14

sorry for previous post about netdisco; my mistake

1 0

(no subject)
by Joel Guillerm 05 Sep '14

05 Sep '14

Hello Chris, thanks for your feedback; in the meantime, I had downloaded and tested the netdisco demo VMware appliance and got some problems ; I posted the following mail on the netdisco mailing list but did not get any feedback yet; if you have any ideas, thanks in advance Joel ************************************************* newbie in netdisco, just downloaded and tested netdisco demo VMWare package (V1.0 netdisco version ... a bit too old maybe, even for a test) To run a quick test, 1) I just edited community values and uncomment "discover_only =" statement followed by a comma-separated list of IP routers to be discovered in /usr/local/netdisco/netdisco. conf ; I let "#discover_no =" statement untouched ; 2) then, I restart netdisco via : ./netdisco -p restart ==> OK after a few minutes, I still did not see any IP routers added on the discover_only list shown via web interface; nothing shown in /usr/local/netdisco/data/logs apart from messages related to "netdisco starting" 3) so, I tested the 2 manual commands below via SSH : ./netdisco -d xxx.xxx.xxx.xxx (for 1 single IP) ./netdisco -r xxx.xxx.xxx.xxx,yyy.yyy.yyy. yyy, zzz.zzz.zzz.zzz, .... for my list of IPs routers Both commands work successfully and results are OK via web interface Questions : a) what else should I do to avoid having to issue the manual commands and let netdisco do its job ? b) with recent netdisco versions, is there a function that allows to export resulting infos (such as the Devices List with their discovered ard/soft infos) as a CSV file for example ? thanks for any help *************************************************

1 0

Accounting for electricity
by Simon Schmitz 04 Sep '14

04 Sep '14

Hi, what do you think of an accounting for electricity, the same as the network port on a switch only here of a PDU switch. Simon

3 2

Alerts for Network devices›
by Darian Jimenez 04 Sep '14

04 Sep '14

Hello, I just need basics on alerting if device is down or maybe if VPN interface is down etc. Attached I set an alert to just try and find devices that are currently "up" to see if it discovers them with the names starting as fw*. Once it works I will change to check for devices that are “down” What am I doing wrong here since it isn't finding anything.

3 4

Re: [Observium] Alerts for Network devices›
by Adam Armstrong 04 Sep '14

04 Sep '14

1 0

How to limit Discovery/Polling to infos visible on the main Device panel ?
by Joel Guillerm 03 Sep '14

03 Sep '14

Hello, newbie in Observium ; is it possible to configure Observium to limit its job to get only the informations available on the main Devices panel ? i.e. Device/Location, Platform, Operating System, Uptime/Sysname so, nothing about interfaces, CP, RAM, ... This would be for quick and basic Device inventory purpose only for some environments The idea is to reduce the total discovery/polling time to the minimum for this basic inventory, otherwise, this could last very long time in case of 100's of devices to deal with. thanks for any advice

2 1

Re: [Observium] Google Maps not showing
by Christian Gerbrandt 03 Sep '14

03 Sep '14

I have this in my config: $config['geocoding']['api'] = 'google'; And is working fine. Where can I find information about this config changes? On Sep 01, 2014, at 05:02 PM, Adam Armstrong <adama(a)memetic.org> wrote: On 2014-09-01 16:23, Sebastian Pitei wrote: > Hi everyone, > > First, congrats ot the devs for making such a nice piece of software. > Simple, to the point, perfect! > > Second, my issue: I'm trying to change the maps engine to Google Maps. > I've change the engine to "google" in config.php but unfortunately > nothing is happening. Any ideas? google-mc is the default, and the only one currently expected to work. The old API map was kinda messy, and no one really uses it anymore. adam. _______________________________________________ observium mailing list observium(a)observium.org http://postman.memetic.org/cgi-bin/mailman/listinfo/observium

3 2

Observium Draw errors
by Adriaan Smuts 03 Sep '14

03 Sep '14

Hi Guys, For some reason Observium is giving Draw Errors on all of our graphs. This started happening after the latest svn update. We have this error on our live observium and our staging/testing one. Does anyone know how to fix this? Please see screenshot below: [cid:image001.png@01CFC769.4007A4D0] Regards Adriaan Smuts Systems Administrator - Windows [file:///C:\Users\adriaan\AppData\Roaming\Microsoft\Signatures\WebAfrica_Files\signature_logo.jpg] ________________________________ Direct Line +27 21 464 9565 Reception 086 000 9500 Website www.webafrica.co.za<http://www.webafrica.co.za/>

2 2

Apache 2.4 config (for newer versions of Linux)
by Tristan Rhodes 02 Sep '14

02 Sep '14

I saw in the list archives that someone recently asked about using newer versions of Linux with Observium. I am not an Apache expert, but I got it working by simply changing to "Require all granted" in the recommended Observium config: http://httpd.apache.org/docs/2.4/upgrading.html root@observium:/opt/observium/includes# cat /etc/apache2/sites-available/000-default.conf <VirtualHost *:80> ServerAdmin webmaster@localhost DocumentRoot /opt/observium/html <Directory /> Options FollowSymLinks AllowOverride None </Directory> <Directory /opt/observium/html/> Options Indexes FollowSymLinks MultiViews AllowOverride All Require all granted </Directory> ErrorLog ${APACHE_LOG_DIR}/error.log LogLevel warn CustomLog ${APACHE_LOG_DIR}/access.log combined ServerSignature On </VirtualHost> I also had to manually enable the php5-mcrypt module: sudo php5enmod mcrypt sudo service apache2 restart I hope this was helpful! Tristan *Tristan Rhodes* Network Engineer Weber State University 801.626.8549

2 1

Re: [Observium] observium Digest, Vol 50, Issue 5
by matthew waterman 02 Sep '14

02 Sep '14

ok great, I will get a few basic alerters programmed and await an update at some stage with further examples. I will update tommorrow if the alerts have been successful. I like the send recovery toggle - sometimes the little hamster would go ape for up to 20 emails with a missed SNMP down. Glad to send the end of that. Matt On 1 September 2014 20:34, <observium-request(a)observium.org> wrote: > Send observium mailing list submissions to > observium(a)observium.org > > To subscribe or unsubscribe via the World Wide Web, visit > http://postman.memetic.org/cgi-bin/mailman/listinfo/observium > or, via email, send a message with subject or body 'help' to > observium-request(a)observium.org > > You can reach the person managing the list at > observium-owner(a)observium.org > > When replying, please edit your Subject line so it is more specific > than "Re: Contents of observium digest..." > > > Today's Topics: > > 1. Re: observium Digest, Vol 50, Issue 3 (Tom Laermans) > > > ---------------------------------------------------------------------- > > Message: 1 > Date: Mon, 01 Sep 2014 10:32:27 +0200 > From: Tom Laermans <tom.laermans(a)powersource.cx> > To: Observium Network Observation System <observium(a)observium.org> > Subject: Re: [Observium] observium Digest, Vol 50, Issue 3 > Message-ID: <54042F1B.8060804(a)powersource.cx> > Content-Type: text/plain; charset="windows-1252"; Format="flowed" > > Hi Matt, > > Yes, the legacy alerters have been removed as they did not work very > well. The new alerting system is a lot better. > > I was planning to create example alerts to replicate the old ones, but I > haven't gotten around to that unfortunately. > > For example, device rebooted: > > - Entity type: device > - Alert conditions: device_uptime < 300 > - Entity match: * > - Device match: * > > + Turn off "Send recovery" so you don't get a recovery mail after 5 > minutes. > > Tom > > On 09/01/2014 10:25 AM, matthew waterman wrote: > > hmmm, > > > > I think I am beginning to see the error in my ways perhaps, > > > > I do not have any Alert-checkers..... > > > > I have never had to add them or go near them as the version I was > > originally running just simply emailed me with Device down, device up, > > device rebooted, or if I wanted it to - port down etc > > > > So the new version will not do this by default? Do I need to created > > alert checkers for all my devices? > > > > matt > > > > > > > > On 1 September 2014 19:53, <observium-request(a)observium.org > > <mailto:observium-request@observium.org>> wrote: > > > > Send observium mailing list submissions to > > observium(a)observium.org <mailto:observium@observium.org> > > > > To subscribe or unsubscribe via the World Wide Web, visit > > http://postman.memetic.org/cgi-bin/mailman/listinfo/observium > > or, via email, send a message with subject or body 'help' to > > observium-request(a)observium.org > > <mailto:observium-request@observium.org> > > > > You can reach the person managing the list at > > observium-owner(a)observium.org <mailto:observium-owner@observium.org> > > > > When replying, please edit your Subject line so it is more specific > > than "Re: Contents of observium digest..." > > > > > > Today's Topics: > > > > 1. Re: observium Digest, Vol 50, Issue 1 (Tom Laermans) > > > > > > > ---------------------------------------------------------------------- > > > > Message: 1 > > Date: Mon, 01 Sep 2014 09:52:26 +0200 > > From: Tom Laermans <tom.laermans(a)powersource.cx > > <mailto:tom.laermans@powersource.cx>> > > To: Observium Network Observation System <observium(a)observium.org > > <mailto:observium@observium.org>> > > Subject: Re: [Observium] observium Digest, Vol 50, Issue 1 > > Message-ID: <540425BA.6050808(a)powersource.cx > > <mailto:540425BA.6050808@powersource.cx>> > > Content-Type: text/plain; charset="iso-8859-1"; Format="flowed" > > > > Hi, > > > > Please share your alert checker configuration (screenshot) so we > > can see > > if those are alright, first. > > > > Tom > > > > On 01/09/2014 09:46, matthew waterman wrote: > > > Thanks for your replies, > > > > > > I have un commented the line "$config['poller-wrapper']['alerter'] > > > = TRUE;" , and also confirmed that I have the correct cron job > > > configured. I then gave the VM a reboot as It is one of the devices > > > that I observe. Unfortunalty i did not receive an email alert, so I > > > reboot another device for a full 5 minutes so I should have > > received 1 > > > x email alert for device down and 1 x reboot alert. I did not > > receive > > > either. Is there a way I can monitor/watch the email being sent or > > > processed to confirm that it is indeed happening? > > > > > > Matt > > > > > > > > > On 1 September 2014 11:20, <observium-request(a)observium.org > > <mailto:observium-request@observium.org> > > > <mailto:observium-request@observium.org > > <mailto:observium-request@observium.org>>> wrote: > > > > > > Send observium mailing list submissions to > > > observium(a)observium.org <mailto:observium@observium.org> > > <mailto:observium@observium.org <mailto:observium@observium.org>> > > > > > > To subscribe or unsubscribe via the World Wide Web, visit > > > http://postman.memetic.org/cgi-bin/mailman/listinfo/observium > > > or, via email, send a message with subject or body 'help' to > > > observium-request(a)observium.org > > <mailto:observium-request@observium.org> > > > <mailto:observium-request@observium.org > > <mailto:observium-request@observium.org>> > > > > > > You can reach the person managing the list at > > > observium-owner(a)observium.org > > <mailto:observium-owner@observium.org> > > <mailto:observium-owner@observium.org > > <mailto:observium-owner@observium.org>> > > > > > > When replying, please edit your Subject line so it is more > > specific > > > than "Re: Contents of observium digest..." > > > > > > > > > Today's Topics: > > > > > > 1. Email setup in Config.php (matthew waterman) > > > 2. Re: Email setup in Config.php (Tristan Rhodes) > > > 3. Re: Email setup in Config.php (Nathan Phelan) > > > > > > > > > > > > ---------------------------------------------------------------------- > > > > > > Message: 1 > > > Date: Mon, 1 Sep 2014 08:32:15 +1200 > > > From: matthew waterman <mwaterman1982(a)gmail.com > > <mailto:mwaterman1982@gmail.com> > > > <mailto:mwaterman1982@gmail.com > > <mailto:mwaterman1982@gmail.com>>> > > > To: observium(a)observium.org <mailto:observium@observium.org> > > <mailto:observium@observium.org <mailto:observium@observium.org>> > > > Subject: [Observium] Email setup in Config.php > > > Message-ID: > > > > > > > > <CAMq=ffcjUmV--G_kqRpXMK+ugBQ6OB2eK+6dEsqza4mteHZx4Q(a)mail.gmail.com > > <mailto: > ffcjUmV--G_kqRpXMK%2BugBQ6OB2eK%2B6dEsqza4mteHZx4Q(a)mail.gmail.com> > > <mailto: > ffcjUmV--G_kqRpXMK%2BugBQ6OB2eK%2B6dEsqza4mteHZx4Q(a)mail.gmail.com > > <mailto: > ffcjUmV--G_kqRpXMK%252BugBQ6OB2eK%252B6dEsqza4mteHZx4Q(a)mail.gmail.com>>> > > > Content-Type: text/plain; charset="utf-8" > > > > > > Hi, > > > > > > I have been using Observium for about 1 year successfully and > > > recently, > > > approximately 3mth ago, I subscribed to the paid version, > > upgraded > > > via SVN > > > and copied my config.php. I do not have working email alerts at > > > the moment > > > and would like to know what needs to be changed to get this > > > working again. > > > Below is a print of my config.php file. Please advise me as to > > > what needs > > > to be changed to get email working again. > > > > > > Config.php: > > > > > > <?php > > > > > > ## Have a look in includes/defaults.inc.php for examples of > > > settings you > > > can set here. DO NOT EDIT defaults.inc.php! > > > > > > // Database config > > > $config['db_host'] = "localhost"; > > > $config['db_user'] = "myuesrname"; > > > $config['db_pass'] = "mypassword"; > > > $config['db_name'] = "observium"; > > > > > > // Location > > > $config['install_dir'] = "/opt/observium"; > > > > > > // Thie should *only* be set if you want to *force* a > particular > > > hostname/port > > > // It will prevent the web interface being usable form any > other > > > hostname > > > #$config['base_url'] = "http://observium.company.com"; > > > > > > // Default community list to use when adding/discovering > > > $config['snmp']['community'] = array("public"); > > > > > > // Authentication Model > > > $config['auth_mechanism'] = "mysql"; // default, other > > options: > > > ldap, > > > http-auth, please see documentation for config help > > > > > > // Enable alerter > > > // $config['poller-wrapper']['alerter'] = TRUE; > > > > > > // Set up a default alerter (email to a single address) > > > > > > // SNMP Settings > > > $config['snmp']['timeout'] = 1000; # timeout in ms > > > $config['snmp']['retries'] = 6; # how many times to > > > retry the > > > query > > > > > > //Ping Settings > > > $config['ping']['timeout'] = 2000; # timeout in ms > > > $config['ping']['retries'] = 10; # how many times to > > > retry the > > > query > > > > > > //Alert Settings > > > $config['alerts']['email']['default'] = > > "myemail(a)domain.co.nz <mailto:myemail@domain.co.nz> > > > <mailto:myemail@domain.co.nz <mailto:myemail@domain.co.nz>>"; > > > $config['alerts']['email']['from'] = "observium.dev < > > > myeamil(a)domain.co.nz <mailto:myeamil@domain.co.nz> > > <mailto:myeamil@domain.co.nz <mailto:myeamil@domain.co.nz>>>"; > > > $config['alerts']['email']['default_only'] = TRUE; > > > $config['alerts']['email']['enable'] = FALSE; > > > $config['uptime_warning'] = "14400"; ## Time > to > > > display > > > reboot warning > > > //Poller and Discovery Modules > > > > > > //Syslog settings > > > $config['enable_syslog'] = 1; > > > $config['syslog_filter'] = array("last message repeated", > > > "Connection from > > > UDP: [", > > > "ipSystemStatsTable node > > > ipSystemStatsOutFragOKs not implemented", > > > "diskio.c: don't know how to > > > handle"); ## > > > Ignore some crappy stuff from SNMP daemon > > > > > > //Geocoding Configuration > > > > > > > > > // End config.php > > > > > > > > > > > > *Observium*0.14.8.5763 *Apache*2.2.22 (Ubuntu) > > *PHP*5.3.10-1ubuntu3.13 > > > *MySQL*5.5.38-0ubuntu0.12.04.1 *SNMP*NET-SNMP version: 5.4.3 > > > *RRDtool*1.4.7 > > >

3 3

6500 PSU Voltage Check
by Jake Turner 02 Sep '14

02 Sep '14

Hi All, I was wondering if I could configure alerts for the voltage on a couple of 6500 power supplies (to try and alert on power failures). I've used the Entity Type of Voltage and this picks up the Enitity's from the 6500 (110/220v AC power supply, 2500 watt 2 - Power Supply 2 power-input) however I'm unsure on how to configure the 'Check Conditions' and 'Associations'. The below is a guess for the check conditions: Metric Condition Value sensor_voltage lt 220 In Associations I have simply put * * which I suspect is incorrect. Has anybody else tried setting up checks on voltage? Thanks Jake

2 3

Google Maps not showing
by Sebastian Pitei 01 Sep '14

01 Sep '14

Hi everyone, First, congrats ot the devs for making such a nice piece of software. Simple, to the point, perfect! Second, my issue: I'm trying to change the maps engine to Google Maps. I've change the engine to "google" in config.php but unfortunately nothing is happening. Any ideas? Regards, Sebi

2 1

Re: [Observium] observium Digest, Vol 50, Issue 3
by matthew waterman 01 Sep '14

01 Sep '14

hmmm, I think I am beginning to see the error in my ways perhaps, I do not have any Alert-checkers..... I have never had to add them or go near them as the version I was originally running just simply emailed me with Device down, device up, device rebooted, or if I wanted it to - port down etc So the new version will not do this by default? Do I need to created alert checkers for all my devices? matt On 1 September 2014 19:53, <observium-request(a)observium.org> wrote: > Send observium mailing list submissions to > observium(a)observium.org > > To subscribe or unsubscribe via the World Wide Web, visit > http://postman.memetic.org/cgi-bin/mailman/listinfo/observium > or, via email, send a message with subject or body 'help' to > observium-request(a)observium.org > > You can reach the person managing the list at > observium-owner(a)observium.org > > When replying, please edit your Subject line so it is more specific > than "Re: Contents of observium digest..." > > > Today's Topics: > > 1. Re: observium Digest, Vol 50, Issue 1 (Tom Laermans) > > > ---------------------------------------------------------------------- > > Message: 1 > Date: Mon, 01 Sep 2014 09:52:26 +0200 > From: Tom Laermans <tom.laermans(a)powersource.cx> > To: Observium Network Observation System <observium(a)observium.org> > Subject: Re: [Observium] observium Digest, Vol 50, Issue 1 > Message-ID: <540425BA.6050808(a)powersource.cx> > Content-Type: text/plain; charset="iso-8859-1"; Format="flowed" > > Hi, > > Please share your alert checker configuration (screenshot) so we can see > if those are alright, first. > > Tom > > On 01/09/2014 09:46, matthew waterman wrote: > > Thanks for your replies, > > > > I have un commented the line "$config['poller-wrapper']['alerter'] > > = TRUE;" , and also confirmed that I have the correct cron job > > configured. I then gave the VM a reboot as It is one of the devices > > that I observe. Unfortunalty i did not receive an email alert, so I > > reboot another device for a full 5 minutes so I should have received 1 > > x email alert for device down and 1 x reboot alert. I did not receive > > either. Is there a way I can monitor/watch the email being sent or > > processed to confirm that it is indeed happening? > > > > Matt > > > > > > On 1 September 2014 11:20, <observium-request(a)observium.org > > <mailto:observium-request@observium.org>> wrote: > > > > Send observium mailing list submissions to > > observium(a)observium.org <mailto:observium@observium.org> > > > > To subscribe or unsubscribe via the World Wide Web, visit > > http://postman.memetic.org/cgi-bin/mailman/listinfo/observium > > or, via email, send a message with subject or body 'help' to > > observium-request(a)observium.org > > <mailto:observium-request@observium.org> > > > > You can reach the person managing the list at > > observium-owner(a)observium.org <mailto:observium-owner@observium.org> > > > > When replying, please edit your Subject line so it is more specific > > than "Re: Contents of observium digest..." > > > > > > Today's Topics: > > > > 1. Email setup in Config.php (matthew waterman) > > 2. Re: Email setup in Config.php (Tristan Rhodes) > > 3. Re: Email setup in Config.php (Nathan Phelan) > > > > > > > ---------------------------------------------------------------------- > > > > Message: 1 > > Date: Mon, 1 Sep 2014 08:32:15 +1200 > > From: matthew waterman <mwaterman1982(a)gmail.com > > <mailto:mwaterman1982@gmail.com>> > > To: observium(a)observium.org <mailto:observium@observium.org> > > Subject: [Observium] Email setup in Config.php > > Message-ID: > > > > <CAMq=ffcjUmV--G_kqRpXMK+ugBQ6OB2eK+6dEsqza4mteHZx4Q(a)mail.gmail.com > <mailto:ffcjUmV--G_kqRpXMK%2BugBQ6OB2eK%2B6dEsqza4mteHZx4Q@mail.gmail.com > >> > > Content-Type: text/plain; charset="utf-8" > > > > Hi, > > > > I have been using Observium for about 1 year successfully and > > recently, > > approximately 3mth ago, I subscribed to the paid version, upgraded > > via SVN > > and copied my config.php. I do not have working email alerts at > > the moment > > and would like to know what needs to be changed to get this > > working again. > > Below is a print of my config.php file. Please advise me as to > > what needs > > to be changed to get email working again. > > > > Config.php: > > > > <?php > > > > ## Have a look in includes/defaults.inc.php for examples of > > settings you > > can set here. DO NOT EDIT defaults.inc.php! > > > > // Database config > > $config['db_host'] = "localhost"; > > $config['db_user'] = "myuesrname"; > > $config['db_pass'] = "mypassword"; > > $config['db_name'] = "observium"; > > > > // Location > > $config['install_dir'] = "/opt/observium"; > > > > // Thie should *only* be set if you want to *force* a particular > > hostname/port > > // It will prevent the web interface being usable form any other > > hostname > > #$config['base_url'] = "http://observium.company.com"; > > > > // Default community list to use when adding/discovering > > $config['snmp']['community'] = array("public"); > > > > // Authentication Model > > $config['auth_mechanism'] = "mysql"; // default, other options: > > ldap, > > http-auth, please see documentation for config help > > > > // Enable alerter > > // $config['poller-wrapper']['alerter'] = TRUE; > > > > // Set up a default alerter (email to a single address) > > > > // SNMP Settings > > $config['snmp']['timeout'] = 1000; # timeout in ms > > $config['snmp']['retries'] = 6; # how many times to > > retry the > > query > > > > //Ping Settings > > $config['ping']['timeout'] = 2000; # timeout in ms > > $config['ping']['retries'] = 10; # how many times to > > retry the > > query > > > > //Alert Settings > > $config['alerts']['email']['default'] = "myemail(a)domain.co.nz > > <mailto:myemail@domain.co.nz>"; > > $config['alerts']['email']['from'] = "observium.dev < > > myeamil(a)domain.co.nz <mailto:myeamil@domain.co.nz>>"; > > $config['alerts']['email']['default_only'] = TRUE; > > $config['alerts']['email']['enable'] = FALSE; > > $config['uptime_warning'] = "14400"; ## Time to > > display > > reboot warning > > //Poller and Discovery Modules > > > > //Syslog settings > > $config['enable_syslog'] = 1; > > $config['syslog_filter'] = array("last message repeated", > > "Connection from > > UDP: [", > > "ipSystemStatsTable node > > ipSystemStatsOutFragOKs not implemented", > > "diskio.c: don't know how to > > handle"); ## > > Ignore some crappy stuff from SNMP daemon > > > > //Geocoding Configuration > > > > > > // End config.php > > > > > > > > *Observium*0.14.8.5763 *Apache*2.2.22 (Ubuntu) > *PHP*5.3.10-1ubuntu3.13 > > *MySQL*5.5.38-0ubuntu0.12.04.1 *SNMP*NET-SNMP version: 5.4.3 > > *RRDtool*1.4.7 > >

2 1

Re: [Observium] observium Digest, Vol 50, Issue 1
by matthew waterman 01 Sep '14

01 Sep '14

Thanks for your replies, I have un commented the line "$config['poller-wrapper']['alerter'] = TRUE;" , and also confirmed that I have the correct cron job configured. I then gave the VM a reboot as It is one of the devices that I observe. Unfortunalty i did not receive an email alert, so I reboot another device for a full 5 minutes so I should have received 1 x email alert for device down and 1 x reboot alert. I did not receive either. Is there a way I can monitor/watch the email being sent or processed to confirm that it is indeed happening? Matt On 1 September 2014 11:20, <observium-request(a)observium.org> wrote: > Send observium mailing list submissions to > observium(a)observium.org > > To subscribe or unsubscribe via the World Wide Web, visit > http://postman.memetic.org/cgi-bin/mailman/listinfo/observium > or, via email, send a message with subject or body 'help' to > observium-request(a)observium.org > > You can reach the person managing the list at > observium-owner(a)observium.org > > When replying, please edit your Subject line so it is more specific > than "Re: Contents of observium digest..." > > > Today's Topics: > > 1. Email setup in Config.php (matthew waterman) > 2. Re: Email setup in Config.php (Tristan Rhodes) > 3. Re: Email setup in Config.php (Nathan Phelan) > > > ---------------------------------------------------------------------- > > Message: 1 > Date: Mon, 1 Sep 2014 08:32:15 +1200 > From: matthew waterman <mwaterman1982(a)gmail.com> > To: observium(a)observium.org > Subject: [Observium] Email setup in Config.php > Message-ID: > <CAMq= > ffcjUmV--G_kqRpXMK+ugBQ6OB2eK+6dEsqza4mteHZx4Q(a)mail.gmail.com> > Content-Type: text/plain; charset="utf-8" > > Hi, > > I have been using Observium for about 1 year successfully and recently, > approximately 3mth ago, I subscribed to the paid version, upgraded via SVN > and copied my config.php. I do not have working email alerts at the moment > and would like to know what needs to be changed to get this working again. > Below is a print of my config.php file. Please advise me as to what needs > to be changed to get email working again. > > Config.php: > > <?php > > ## Have a look in includes/defaults.inc.php for examples of settings you > can set here. DO NOT EDIT defaults.inc.php! > > // Database config > $config['db_host'] = "localhost"; > $config['db_user'] = "myuesrname"; > $config['db_pass'] = "mypassword"; > $config['db_name'] = "observium"; > > // Location > $config['install_dir'] = "/opt/observium"; > > // Thie should *only* be set if you want to *force* a particular > hostname/port > // It will prevent the web interface being usable form any other hostname > #$config['base_url'] = "http://observium.company.com"; > > // Default community list to use when adding/discovering > $config['snmp']['community'] = array("public"); > > // Authentication Model > $config['auth_mechanism'] = "mysql"; // default, other options: ldap, > http-auth, please see documentation for config help > > // Enable alerter > // $config['poller-wrapper']['alerter'] = TRUE; > > // Set up a default alerter (email to a single address) > > // SNMP Settings > $config['snmp']['timeout'] = 1000; # timeout in ms > $config['snmp']['retries'] = 6; # how many times to retry the > query > > //Ping Settings > $config['ping']['timeout'] = 2000; # timeout in ms > $config['ping']['retries'] = 10; # how many times to retry the > query > > //Alert Settings > $config['alerts']['email']['default'] = "myemail(a)domain.co.nz"; > $config['alerts']['email']['from'] = "observium.dev < > myeamil(a)domain.co.nz>"; > $config['alerts']['email']['default_only'] = TRUE; > $config['alerts']['email']['enable'] = FALSE; > $config['uptime_warning'] = "14400"; ## Time to display > reboot warning > //Poller and Discovery Modules > > //Syslog settings > $config['enable_syslog'] = 1; > $config['syslog_filter'] = array("last message repeated", "Connection from > UDP: [", > "ipSystemStatsTable node > ipSystemStatsOutFragOKs not implemented", > "diskio.c: don't know how to handle"); ## > Ignore some crappy stuff from SNMP daemon > > //Geocoding Configuration > > > // End config.php > > > > *Observium*0.14.8.5763 *Apache*2.2.22 (Ubuntu) *PHP*5.3.10-1ubuntu3.13 > *MySQL*5.5.38-0ubuntu0.12.04.1 *SNMP*NET-SNMP version: 5.4.3 > *RRDtool*1.4.7 >

2 1

Email setup in Config.php
by matthew waterman 31 Aug '14

31 Aug '14

Hi, I have been using Observium for about 1 year successfully and recently, approximately 3mth ago, I subscribed to the paid version, upgraded via SVN and copied my config.php. I do not have working email alerts at the moment and would like to know what needs to be changed to get this working again. Below is a print of my config.php file. Please advise me as to what needs to be changed to get email working again. Config.php: <?php ## Have a look in includes/defaults.inc.php for examples of settings you can set here. DO NOT EDIT defaults.inc.php! // Database config $config['db_host'] = "localhost"; $config['db_user'] = "myuesrname"; $config['db_pass'] = "mypassword"; $config['db_name'] = "observium"; // Location $config['install_dir'] = "/opt/observium"; // Thie should *only* be set if you want to *force* a particular hostname/port // It will prevent the web interface being usable form any other hostname #$config['base_url'] = "http://observium.company.com"; // Default community list to use when adding/discovering $config['snmp']['community'] = array("public"); // Authentication Model $config['auth_mechanism'] = "mysql"; // default, other options: ldap, http-auth, please see documentation for config help // Enable alerter // $config['poller-wrapper']['alerter'] = TRUE; // Set up a default alerter (email to a single address) // SNMP Settings $config['snmp']['timeout'] = 1000; # timeout in ms $config['snmp']['retries'] = 6; # how many times to retry the query //Ping Settings $config['ping']['timeout'] = 2000; # timeout in ms $config['ping']['retries'] = 10; # how many times to retry the query //Alert Settings $config['alerts']['email']['default'] = "myemail(a)domain.co.nz"; $config['alerts']['email']['from'] = "observium.dev < myeamil(a)domain.co.nz>"; $config['alerts']['email']['default_only'] = TRUE; $config['alerts']['email']['enable'] = FALSE; $config['uptime_warning'] = "14400"; ## Time to display reboot warning //Poller and Discovery Modules //Syslog settings $config['enable_syslog'] = 1; $config['syslog_filter'] = array("last message repeated", "Connection from UDP: [", "ipSystemStatsTable node ipSystemStatsOutFragOKs not implemented", "diskio.c: don't know how to handle"); ## Ignore some crappy stuff from SNMP daemon //Geocoding Configuration // End config.php *Observium*0.14.8.5763 *Apache*2.2.22 (Ubuntu) *PHP*5.3.10-1ubuntu3.13 *MySQL*5.5.38-0ubuntu0.12.04.1 *SNMP*NET-SNMP version: 5.4.3 *RRDtool*1.4.7

3 2

Re: [Observium] Syslog msg empty temporary fix
by Mike Stupalov 30 Aug '14

30 Aug '14

1. write questions to list pls, I'm not a service support 2. why do you have a line break in $template, all text betwen $template and \n" this is one line (use copy-paste) 3. about '& stop' vs '& ~', tilde - legacy but still working variant, and therefore suitable for the old and new rsyslog versions and in irc you sayd that syslog messages displayed if in cisco device set logging without timezone, this is not true? On Sat, Aug 30, 2014 at 2:15 PM, Wouter Prins <wp(a)null0.nl> wrote: > It still doesn't work correctly here. > Any idea's? :) > > I've pasted this into /etc/rsyslog.conf: > > -- > $template > observium,"%fromhost%||%syslogfacility%||%syslogpriority%||%syslogseverity%||%syslogtag%||%$year%-%$month%-%$day% > %timereported:8:25%||%msg%||% > programname%\n" > $ModLoad omprog > $ActionOMProgBinary /opt/observium/syslog.php > > :inputname, isequal, "imudp" :omprog:;observium > > & stop > #--------------------------------------------------------- > -- > > Any idea why i still dont see any cisco syslog messages? When i restart > rsyslogd its not complaining about syntax etc. > I do see unix syslog from servers. > > > On 24 August 2014 12:37, Mike Stupalov <mike(a)observium.org> wrote: > >> Hi, >> >> yes, everything works >> >> >> On Sun, Aug 24, 2014 at 11:44 AM, Wouter Prins <wp(a)null0.nl> wrote: >> >>> Hi Mike, >>> >>> Is this config working for you in 14.04.1? >>> >>> >>> On 20 August 2014 07:14, Mike Stupalov <mike(a)observium.org> wrote: >>> >>>> >>>> .. or just use Rsyslog because it is in base Ubuntu system: >>>> http://observium.org/wiki/Rsyslog_Syslog_Server >>>> >>>> >>>> On Wed, Aug 20, 2014 at 1:18 AM, Robert Williams < >>>> Robert(a)custodiandc.com> wrote: >>>> >>>>> Hi, >>>>> >>>>> Further to Pav's comments earlier, I’ve found that setting the >>>>> “no-parse” flag in syslog-ng stops it from messing with the string and >>>>> restores some reasonable sanity to the messages which get passed to >>>>> Observium. Clearly something has changed within syslog-ng from Ubuntu >>>>> 12->14 and this new issue is nothing to do with the >>>>> Observium-importing-the-message element. >>>>> >>>>> For anyone suffering the same fate, the actual setting syntax to be >>>>> used within the Observium definition for syslog-ng is: >>>>> >>>>> source s_net { >>>>> udp(flags(no-parse)); >>>>> }; >>>>> >>>>> This restores 100% normal message structure for /most/ of the devices >>>>> I’ve just tested with, including all the IOS 15.x ones which had all >>>>> started showing simply "%" as the message content. >>>>> >>>>> The ones which are still a little bit broken are the IOS-XR based >>>>> units as they seem to pass a load of process name, event log number, >>>>> process number, favourite colour and other random crap in the “message” >>>>> element. However, they were all a bit broken before all this anyway to be >>>>> fair. >>>>> >>>>> I can see that within the /includes/syslog.php there is a rather >>>>> extensive section of preg_match/replace for a number of $os types. So I >>>>> guess the best way forwards to sanitise the extra IOS-XR crap is to build >>>>> it in there and submit a patch. Although I have a feeling that IOS and >>>>> IOS-XR count as the same $OS type? So we won't necessarily be able to >>>>> filter the manipulation using that to match them. >>>>> >>>>> Anyway, if we make any progress with it we’ll let you know! >>>>> >>>>> Cheers guys, >>>>> >>>>> >>>>> >>>>> Robert Williams >>>>> Custodian Data Centre >>>>> Email: Robert(a)CustodianDC.com >>>>> http://www.CustodianDC.com >>>>> >>>>> _______________________________________________ >>>>> observium mailing list >>>>> observium(a)observium.org >>>>> http://postman.memetic.org/cgi-bin/mailman/listinfo/observium >>>>> >>>> >>>> >>>> >>>> -- >>>> Mike Stupalov >>>> http://observium.org/ >>>> _______________________________________________ >>>> observium mailing list >>>> observium(a)observium.org >>>> http://postman.memetic.org/cgi-bin/mailman/listinfo/observium >>>> >>>> >>> >>> >>> -- >>> Wouter Prins >>> wp(a)null0.nl >>> >>> >> >> >> -- >> Mike Stupalov >> http://observium.org/ >> > > > > -- > Wouter Prins > wp(a)null0.nl > > -- Mike Stupalov http://observium.org/

2 1

RSS
by Johnson, Edward A. 30 Aug '14

30 Aug '14

I’m trying to get RSS working. php-mcrypt is installed and under “My Settings” it says my RSS/Atom key was created. I can’t find any documentation anywhere that explains anything further.

2 1

Re: [Observium] Avtech Room Alert 4E support?
by Scott Benninger 29 Aug '14

29 Aug '14

I was able to svn add the new file I copied and modified as well as make the diff file with the changes I made to the other files. How would I go about submitting my changes/adds to you to verify and commit? Or does the svn add accomplish this? I am not well versed in the use of svn. Thanks, Scott On Thu, Aug 28, 2014 at 1:53 PM, Adam Armstrong <adama(a)memetic.org> wrote: > Only if you submit them to us and we commit them to the repository. > > "svn add" any new files to SVN and then do "svn diff" to get SVN to > generate a file containing your changes. > > adam. > > > On 2014-08-28 17:52, Scott Benninger wrote: > >> Thanks! I managed to get it working. Not perfect but returns the 2 >> temp sensors I need. There is no internal humidity sensor on the 4E so >> may remove the humidity code as well. >> >> For reference I modified the definitions/os.inc.php roomalert os to >> use the 4E mib. I then coped the 24E sensor .php and modified it to >> use the 4E mibs and had to change the OID from 5 to 6 (the different >> product code) otherwise the mibs are almost the same up until the >> extra sensors that are available in the 24E. >> >> I guess my final question is will all the changes I made stick through >> SVN updates? >> >> Thanks, >> >> Scott >> >> AVTech uses a different MIB for each product, unfortunately. So it needs >> some coding to be done... >> >> Tom >> >> On 08/28/2014 03:41 PM, Adam Armstrong wrote: >> Hi Scott, >> >> You need to write code to discover the objects in the new MIB. >> >> You can look at the old ones as an example, you'll find them in >> includes/discovery/sensors/ >> >> adam. >> >> On 2014-08-28 14:33, Scott Benninger wrote: >> I have been trying to get our Room Alert 4E working to record >> temperature and alert if needed. On the latest svn build(5770). I see >> on the website that the 24E is the only one supported currently since >> they have different MIBS. (FYI they no longer sell the 24E in NA). >> >> I have been able to get it to discover as and AVtech device but I had >> to modify the roomalert discovery and poller php files to add a space >> to RoomAlert as the sysDescr on the 4E is "Room Alert 4E v3.1.1". >> >> I see the 4E mibs are there as well but the temp is not getting >> polled properly. >> >> Is it possible for me to make modifications to get the temp polling >> properly? If so where should I be looking to get the 4E MIBS working >> properly? I am not sure where the mappings are done etc. Is this >> difficult to do? >> >> Otherwise how would I go about getting the working properly? >> >> Thanks, >> >> _ Scott_ >> >> _______________________________________________ >> observium mailing list >> observium(a)observium.org >> http://postman.memetic.org/cgi-bin/mailman/listinfo/observium >> > _______________________________________________ > observium mailing list > observium(a)observium.org > http://postman.memetic.org/cgi-bin/mailman/listinfo/observium >

2 1

Avtech Room Alert 4E support?
by Scott Benninger 28 Aug '14

28 Aug '14

Thanks! I managed to get it working. Not perfect but returns the 2 temp sensors I need. There is no internal humidity sensor on the 4E so may remove the humidity code as well. For reference I modified the definitions/os.inc.php roomalert os to use the 4E mib. I then coped the 24E sensor .php and modified it to use the 4E mibs and had to change the OID from 5 to 6 (the different product code) otherwise the mibs are almost the same up until the extra sensors that are available in the 24E. I guess my final question is will all the changes I made stick through SVN updates? Thanks, Scott > AVTech uses a different MIB for each product, unfortunately. So it needs > some coding to be done... > > Tom > > On 08/28/2014 03:41 PM, Adam Armstrong wrote: >>* Hi Scott, *>>>>* You need to write code to discover the objects in the new MIB. *>>>>* You can look at the old ones as an example, you'll find them in *>> *includes/discovery/sensors/ *>>>>* adam. *>>>>* On 2014-08-28 14:33, Scott Benninger wrote: *>>>* I have been trying to get our Room Alert 4E working to record *>>>* temperature and alert if needed. On the latest svn build(5770). I see *>>>* on the website that the 24E is the only one supported currently since *>>>* they have different MIBS. (FYI they no longer sell the 24E in NA). *>>>>>>* I have been able to get it to discover as and AVtech device but I had *>>>* to modify the roomalert discovery and poller php files to add a space *>>>* to RoomAlert as the sysDescr on the 4E is "Room Alert 4E v3.1.1". *>>>>>>* I see the 4E mibs are there as well but the temp is not getting *>>>* polled properly. *>>>>>>* Is it possible for me to make modifications to get the temp polling *>>>* properly? If so where should I be looking to get the 4E MIBS working *>>>* properly? I am not sure where the mappings are done etc. Is this *>>>* difficult to do? *>>>>>>* Otherwise how would I go about getting the working properly? *>>>>>>* Thanks, *>>>>>>* Scott*

2 1

Avtech Room Alert 4E support?
by Scott Benninger 28 Aug '14

28 Aug '14

I have been trying to get our Room Alert 4E working to record temperature and alert if needed. On the latest svn build(5770). I see on the website that the 24E is the only one supported currently since they have different MIBS. (FYI they no longer sell the 24E in NA). I have been able to get it to discover as and AVtech device but I had to modify the roomalert discovery and poller php files to add a space to RoomAlert as the sysDescr on the 4E is "Room Alert 4E v3.1.1". I see the 4E mibs are there as well but the temp is not getting polled properly. Is it possible for me to make modifications to get the temp polling properly? If so where should I be looking to get the 4E MIBS working properly? I am not sure where the mappings are done etc. Is this difficult to do? Otherwise how would I go about getting the working properly? Thanks, Scott

3 2

remove old event log data
by Simon Smith 28 Aug '14

28 Aug '14

Hi All, hoping again someone can assist me with my problems or questions… i fixed the WMI problem i was having a few weeks ago, however it has left loads and loads of Device rebooted event logs in my database is the an easy way of deleting this data as really i only wanted the log to show once? not really 2,000 times…. I’ve attached a screenshot of showing the data from the mysql i was simply gunna do 'delete from event log where reference = 2447807' but im not 100% sure incase i screw anything up in the database as its a running live system i use regards Simon

2 1

Re: [Observium] Syslog msg empty temporary fix
by Robert Williams 27 Aug '14

27 Aug '14

Hi, Further to Pav's comments earlier, I’ve found that setting the “no-parse” flag in syslog-ng stops it from messing with the string and restores some reasonable sanity to the messages which get passed to Observium. Clearly something has changed within syslog-ng from Ubuntu 12->14 and this new issue is nothing to do with the Observium-importing-the-message element. For anyone suffering the same fate, the actual setting syntax to be used within the Observium definition for syslog-ng is: source s_net { udp(flags(no-parse)); }; This restores 100% normal message structure for /most/ of the devices I’ve just tested with, including all the IOS 15.x ones which had all started showing simply "%" as the message content. The ones which are still a little bit broken are the IOS-XR based units as they seem to pass a load of process name, event log number, process number, favourite colour and other random crap in the “message” element. However, they were all a bit broken before all this anyway to be fair. I can see that within the /includes/syslog.php there is a rather extensive section of preg_match/replace for a number of $os types. So I guess the best way forwards to sanitise the extra IOS-XR crap is to build it in there and submit a patch. Although I have a feeling that IOS and IOS-XR count as the same $OS type? So we won't necessarily be able to filter the manipulation using that to match them. Anyway, if we make any progress with it we’ll let you know! Cheers guys, Robert Williams Custodian Data Centre Email: Robert(a)CustodianDC.com http://www.CustodianDC.com

4 5

Graph Netstats
by Darian Jimenez 27 Aug '14

27 Aug '14

Hello, Anyone know where I could get an understanding of how to interpret the graphs for network devices? Is there any documentation to help explain what to look for in devices for packet loss or problems with service? I don't see a way to tell packet drops like you would see on a device normally.

3 3

Re: [Observium] Weird database issue?
by Nick Pais 26 Aug '14

26 Aug '14

Hogan, I'm talking about the current throughput, screenshots attached. Please excuse my "fantastic" GIMPing skills :D Thanks! > Message: 2 > Date: Fri, 8 Aug 2014 17:40:03 +0000 > From: Hogan Whittall <whittalh(a)yahoo-inc.com> > To: Observium Network Observation System <observium(a)observium.org> > Subject: Re: [Observium] Weird database issue? > Message-ID: <6CDB9AE7-7909-401B-80E3-D404CDA371AC(a)yahoo-inc.com> > Content-Type: text/plain; charset="windows-1252" > > If you?re referring to the link speed (100Mb, 1Gb, etc) then that has historically been a problem with permissions when snmpd tries to access ethtool info. You basically have 3 options: > > - Run snmpd as ?root? (Not recommended) > - Enable ETHTOOL_GSET in the kernel > - Add the link speed of each NIC to snmpd.conf (interface ethX 6 <speed in bits/s>) > > I went with the third option and wrote a script to do this for me. This info is kept in the ?ports? table. > > Or are you talking about current throughput and not port speed? > > -Hogan

4 11

fixing graphing of FortiGate memory (used to work, now broken)
by Nathan Phelan 26 Aug '14

26 Aug '14

Hi Guys, Short version: Fortinet memory stops showing in Observium after updating due to Fortinet MIBS not being where Observium expects them. Hack Solution: mv /opt/observium/mibs/FORTINET-* /opt/observium/mibs/fortinet/ ./discovery.php -h all Long version: We have been running a very old version for a long time ( 0.14.1.4945 ) and it's been ticking along nicely but I've finally found some time to do a test update to the latest svn and ran into an issue with Fortigate memory. I ran a discovery with debug; attached as "memory debug.txt". If I run one of those commands manually I get the following: root@clone:/opt/observium# /usr/bin/snmpget -v2c -c 'test -snmp' -OvQ -m FORTINET-FORTIGATE-MIB -M /opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp:/opt/observium/mibs/fortinet 'udp':'testdev.test.local':'161' fgSysMemUsage.0 MIB search path: /opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp:/opt/observium/mibs/fortinet Cannot find module (FORTINET-FORTIGATE-MIB): At line 0 in (none) fgSysMemUsage.0: Unknown Object Identifier (Sub-id not found: (top) -> fgSysMemUsage) The FORTINET-FORTIGATE-MIB files don't appear to have changed but Observium appears to be looking for them under "/opt/observium/mibs/fortinet/" when they are actually just under "/opt/observium/mibs/" After doing this: root@clone:/opt/observium# cd mibs root@clone:/opt/observium/mibs# mkdir fortinet root@clone:/opt/observium/mibs# mv FORTINET-* ./fortinet/ and then running discovery again memory stats came back. Has anyone else had this issue? If so maybe the MIBS need to be relocated in SVN? Cheers, Nathan

2 1

Quote for feature
by Benoit Lambert 25 Aug '14

25 Aug '14

Where can I get a quote for a new feature? The Professional Services (http://www.observium.org/services/) page doesn't contain any information on who to contact. Thanks, Benoit

6 8

Pagination on edit settings?
by Michael Loftis 25 Aug '14

25 Aug '14

Is there *any* way to get pagination added to the edit setting pages? F/ex the "Sensors" page is unusable on a majority of my devices try waiting for load/render when you've got something like a fully loaded Juniper EX9214 so you can disable a sensor alert on one port ... ~300 ports - it's just pure pain assuming it finishes at all. And then you have to set PHP's limits so high to get the submit/save to work. Another issue is I kind of need an ability to occasionally do a "reset all" on the limits page. Individually checking off hundreds of sensors is a completely unnecessary waste of time. I realise I could go muck in the database for both of these in my particular but thats just not always an option and this just seems like something it should be doing when it hits a couple hundred records or some configurable limit. -- "Genius might be described as a supreme capacity for getting its possessors into trouble of all kinds." -- Samuel Butler

2 1

Re: [Observium] Moving logs and rrds to another partition?
by Benoit Lambert 25 Aug '14

25 Aug '14

If anyone is interested, this is how I did it without shutting down the server. And it worked. #Add 2 30GB disk (sdb1=DB | sdc1=rrd) #Rescan to find HDD - without shutdown echo "- - -" > /sys/class/scsi_host/host2/scan #check if it got added fdisk -l ls -la /dev/sd* #Stop daemons service crond stop service snmpd stop service syslog-ng stop service httpd stop service auditd stop #Stop sql last service mysqld stop #Configure DB HDD fdisk /dev/sdb n p 1 <cr> <cr> w #Configure rrd HDD fdisk /dev/sdc n p 1 <cr> <cr> w #Format them in ext4 mkfs.ext4 /dev/sdb1 mkfs.ext4 /dev/sdc1 #Rename DB folder cd /var/lib/ mv mysql mysql_tmp #Recreate mysql folder mkdir mysql #Mount the DB hard drive mount -t ext4 /dev/sdb1 /var/lib/mysql #Copy files over and preserve owners/perms cp -rp mysql_tmp/* mysql/ #change owner/perms of mysql folder chown mysql:mysql mysql #Rename rrd folder cd /opt/observium mv rrd rrd_tmp #Recreate rrd folder mkdir rrd #Mount the rrd hard drive mount -t ext4 /dev/sdc1 /opt/observium/rrd #Copy files over and preserve owners/perms cp -rp rrd_tmp/* rrd/ #change owner/perms of mysql folder chown apache:apache rrd #mount at startup - edit /etc/fstab /dev/sdb1 /var/lib/mysql ext4 defaults 0 0 /dev/sdc1 /opt/observium/rrd ext4 defaults 0 0 #Start daemons service mysqld start service httpd start service syslog-ng start service snmpd start service crond start service auditd start

2 1

Re: [Observium] help with observium
by Benoit Lambert 25 Aug '14

25 Aug '14

Add this to your config.php #PING Settings - Retries/Timeouts $config['ping']['retries'] = 10; // How many times to retry ping (1 - 10) $config['ping']['timeout'] = 1000; // Timeout in milliseconds (50 - 2000)

3 2

help with observium
by Magnus Svensson 25 Aug '14

25 Aug '14

Hi! I got a problem with my new install. i get messege: 2014-08-25 11:00:01 "host" System Device status changed to Up 2014-08-25 10:55:07 "host" System Device status changed to Down (ping) its always down 5min, and if i ping the host its up. its just observium that think its down. ive google it and tried ping settings in config and i dont get it to work. someone know whats wrong? //magnus

3 3

Status Proxmox-VE-Monitoring
by Cyrill Matenaers 23 Aug '14

23 Aug '14

Hi all, I just read something about Proxmox-Monitoring here http://jira.observium.org/browse/OBSERVIUM-471. What is the actual status of this development? Is there any documetation on how to use it? Thanks for your help! Kind regards, Cyrill

4 6

Re: [Observium] alerting
by Jake Hansen 22 Aug '14

22 Aug '14

Can anyone help with an issue we are having regarding alerting. Every since updating a few weeks ago, we no longer get email alerts when outages occur. I have verified that the email on the server it self is working, we simply get no events generated when things go down. Did something change in this regard? How can I restore email alerts? -- Jake Hansen Sr. Network Administrator ZTelco / Zray Technologies, Inc. 858-431-4411 Direct 858-565-2155 Office

2 1

Apache access config for Ubuntu 14.04
by Al Nash 22 Aug '14

22 Aug '14

Hello Observium Just curious, your documentation here http://www.observium.org/wiki/Debian_Ubuntu_Installation#Problems mentions modifying the Apache access configuration for 13.10 and 14.04. Are there any helpful articles that can assist with making the necessary modifications? Thank You -- <http://dattobackup.com/email-signature> *Al Nash*DEVT Engineer Datto, Inc. 877-455-6015www.dattobackup.com

1 0

Odd real time graph behavior
by Derek 22 Aug '14

22 Aug '14

I'm getting some strange looking graphs on some ports on my routers, where the graph is basically just a bunch of spikes. Set at 1 second intervals, it will register traffic for one tick, then nothing for anywhere from 4-10 ticks, then register traffic again, and so on. This is happening on Cisco 2811's, 2911's, and a 7206VXR, and it happens on the FastEthernet, GigEthernet, and SVI ports on them. If I set the interval to 5 seconds or higher, it looks normal again. Now, these same routers with this problem have no issue doing a 1 second interval on their Serial ports or sub-interfaces. We have several 2960 switches that seem to work just fine. I've attached an example graph to show you what I see. I happen to know that this port had at least a consistent 1MB connection throughout the time period of the graph. Thanks, Derek

3 4

Simple question about application monitoring
by Christopher K. Brown 21 Aug '14

21 Aug '14

Looking at Observium for the first time and wanted confirmation on this: From looking around at an install and the scripts in the scripts/agent-local directory, I believe these data-gathering scripts are executed locally on each host that is being monitored. Is that correct? Thanks!

2 1

Re: [Observium] Moving logs and rrds to another partition?
by Benoit Lambert 21 Aug '14

21 Aug '14

Perfect, thanks! I won't forget to chown/chmod :P Benoit

1 0

Re: [Observium] Moving logs and rrds to another partition?
by Benoit Lambert 21 Aug '14

21 Aug '14

Can I move entire DB to another disk? Like this? : 1. Stop the daemons 2. Rename the DB folder "mv /var/lib/mysql /var/lib/mysql-tmp" 3. Recreate the folder "mkdir /var/lib/mysql" 4. Mount the new disk to the new folder "mount -t ext4 /dev/sdb1 /var/lib/mysql" (put in fstab after) 5. Copy the files from the old folder to the new folder (cp mysql-tmp/* mysql/) 6. Restart the daemons. And voila??? Thanks, Benoit

3 2

Re: [Observium] Moving logs and rrds to another partition?
by Benoit Lambert 21 Aug '14

21 Aug '14

Would this work? http://dev.mysql.com/doc/refman/5.5/en/symbolic-links.html Thanks, Benoit

2 1

Cannot Ping
by Greg Lipschitz 21 Aug '14

21 Aug '14

Hi All, Seeing an issue where the interface is reporting it cannot ping the host but you can ping it fine from the console of the server. Anyone else seen this issue? Adding host xxxxxxxxx community mycomunity port 161 Could not ping xxxxxxxxxxx. Greg Lipschitz Director Summit IT Management<http://www.thesummitgroup.com.au> | Summit Internet<http://www.summitinternet.com.au> | Summit Creative<http://www.summitcreative.com.au> - ‘reach your peak’ Divisions of The Summit Group (Australia) Pty Ltd Phone (Australia): 1300 049 749 Phone (US & Canada): (321) 216 3844 E-mail: Greg(a)thesummitgroup.com.au<mailto:Greg@thesummitgroup.com.au> Internet: http://www.thesummitgroup.com.au/<http://www.thesummitgroup.com.au> Address: Level 1, 39 Railway Road, Blackburn VIC 3130 Postal: P.O. Box 3225, Doncaster East VIC 3109 Follow us on Facebook<http://www.facebook.com/thesummitgroup/> | LinkedIn<http://www.linkedin.com/company/1942329> | Twitter<http://twitter.com/summitgroupau/> -- ExchangeDefender Message Security: Click below to verify authenticity https://admin.exchangedefender.com/verify.php?id=s7LBpcHQ003797&from=greg@t…

2 3

Traffic graphs have red line on it
by Marco Marques 21 Aug '14

21 Aug '14

Hi Guys, When looking at the traffic graphs for the ports on a devices, it has these red lines on the graph. What do they represent? See attached. Marco Marques

4 4

Alert Checker - Device match
by Jake Turner 20 Aug '14

20 Aug '14

Hi All, I hope somebody can help. I’m currently trying to add device alerts for all my Cisco devices. As per the example in the alerting guide I’ve used ‘os equals iOS’ which works perfectly for my iOS devices but doesn’t alert on any of my XR devices. I gave 'os match iOS’ a go but that again only gives iOS devices. ‘os equals iosxr’ pulls the XR devices but obviously not the iOS devices. I’ve also tried the two statements on separate lines and that just breaks the checker. Is there any way to put the iOS and XR devices on one checker (based on os) or am I going to have to look into selecting on hostname or something similar? Thanks Jake Turner

3 3

Moving logs and rrds to another partition?
by Benoit Lambert 20 Aug '14

20 Aug '14

I want to move all logs and rrds to another partition. I know rrds are stored in "/opt/observium/rrd"... But where on disk does Observium store syslogs|eventlogs? Unless they are in the DB and moving them to another partition is impossible...? I have it installed on Centos 6.5. Thanks in advance for any help! Benoit

3 2

Alerting
by RYAN M. vAN GINNEKEN 20 Aug '14

20 Aug '14

Just to be clear Alerting is only available in the paid version? the website observium states future ... "is the future is now"??? this is a very important feature that is lacking Computer King CaN-Mail Surveillance King http://computerking.ca http://canmail.org http://surveillanceking.net Surveillance - Sales Service - Hosting Backup Internet Based Surveillance Systems Custom Service Pac kages Secure IMAP Email - Automated Remote Backups - Photo Blogs - Online ERP and Accounting Packages

4 5

Re: [Observium] No port names in traffic accounting
by Travis Kreikemeier 20 Aug '14

20 Aug '14

Any thoughts on this issue? Is this a known issue? Observium 0.14.7.5736 (stable) TRAVIS KREIKEMEIER From: Travis Kreikemeier Sent: Sunday, August 10, 2014 1:27 PM To: 'observium(a)observium.org' Subject: No port names in traffic accounting When adding a Calix E7 port to a customer in traffic accounting. All of the interfaces in the drop down are blank, so hard to figure out which one to select. A work around I have been doing is going to the switch port and clicking "Create Bill". Would like to add the ports in the traffic accounting area. [cid:image001.jpg@01CFB87C.115A9BC0] Some of the ports on the device: [cid:image002.jpg@01CFB87C.115A9BC0] TRAVIS KREIKEMEIER

8 12

Port Alerts
by Tech8 otelafrica 20 Aug '14

20 Aug '14

Hi Guys On the subscription version, what would be an example of setting up an alert if a serial0/0 or eth0 port goes down on a device? Regards Anton

2 1

server rebooted log over and over again
by Simon Smith 20 Aug '14

20 Aug '14

Hi All, I seem to have an issue with a Windows machine and SNMP, every 5 mins when the Observium checks one of our windows machine, I keep getting ‘Device rebooted after X days’ in the event logs of that machine I did do a server reboot the other day on that machine, however if i enable the Device Ignore, i never see this issue but again thats only a work around!? is the a bug possible?! im happy to help with this issue Regards Simon

1 0

dealing with locations
by Mike Glass 19 Aug '14

19 Aug '14

How does one go about changing the location, is there somewhere I can input gps coordinates to change the map pointers to a specific location. Most of my devices show up in the UK as they are tagged "Server Room". Thanks Mike

8 12