- observium - lists.observium.org

sorting type on ports tab changed?
by Nikolay Shopik 29 Nov '11

29 Nov '11

Hi, Does sorting order recently changed on ports tab? When I sort by name of port right now it sort like this GigabitEthernet0/1 GigabitEthernet0/10 GigabitEthernet0/11 etc but before it was 0/1, 0/2, 0/3, etc.

2 3

VLANs Tab empty after an upgrade
by Bruce-Young Majola 23 Nov '11

23 Nov '11

HI, I have updated to version 0.11.11.2734 and noticed that the VLANs Tab is now empty and does not even show the "Powered by xxxxxx" at the bottom of the page. Regards, Bruce DISCLAIMER: The information in this message is confidential and may be legally privileged. It is intended solely for the addressee. Access to this message by anyone else is unauthorized. If you are not the intended recipient, any disclosure, copying, or distribution of the message, or any action or omission taken by you in reliance on it, is prohibited and may be unlawful. Please immediately contact the sender if you have received this message in error. SWIFTNET and any of its subsidiaries each reserve the right to monitor all e-mail communications through its networks. Thank you.

2 2

Abnormal spike in billing graphs - r2719
by Berant Lemmenes 23 Nov '11

23 Nov '11

Hello, I've just recently setup Observium and noticed a strange spike in reported usage for one billing item, that wasn't reported in the actual interfaces stats. I've attached three screen shots, one of the accurate billing page for the billing entry in question, the 2nd for the interface page under the device, and the 3rd for the same interface as seen from a cricket install. As you can see the physical interface graphs in Observium or cricket don't show this extended period of ~ 8Gb/s that show up in the mysql based graphs. Looking at bill_data for the bill_id in question there were 45 entries where in_delta was exactly 309525032051591 while out_delta continues to change. Here is an example row: 31, 2011-11-10 17:35:06, 299, 309525032052787, 309525032051591, 1196 This has only manifested in this one billing. Let me know if there is anything else I can look at or provide that would assist. Thank you in advance. Thanks, Berant

2 9

Database Question
by Letz Stefan / ACS 18 Nov '11

18 Nov '11

Hello List, we use observium to monitor about 200 network devices including syslog, ipsec, and smokeping. What we see is an excessive growing off database every time we make an svn update. Could everyone else see this phenomen? Mit freundlichen Gr??en / Best regards Stefan Letz Team Manager Customer Services ACS Solutions GmbH Maximilianallee 4 04129 Leipzig Phone: +49 341 355913 45 Mobile: +49 151 11446409 Fax: +49 341 355913 11 www.acs-europe.de<http://www.acs-europe.de> [cid:gold_partner_2011.jpg@10d693991e784a969efcef6bb72627ac] Amtsgericht Leipzig: HRB21111 USt-IdNr: DE814217083 Gesch?ftsf?hrung: Thomas Lindner

1 0

Billing question
by Berant Lemmenes 17 Nov '11

17 Nov '11

I have a quick question to confirm what data is used to determine an overage... I believe I'm understanding the code/database correctly in that it calculates the 95th percentile for both in and out (rate_95th_in/rate_95th_out) and then whichever one is larger is stored as rate_95th and that is what is used for the value that the overage is based on. I just ask because we see ~4-5 times more entries that are over their limit with Observium than with our previous system (which granted was horribly cobbled together, and last maintained in the early 00's), and I just wanted to make sure it wasn't taking the sum of in and out for the calculation. Thanks! Berant

2 2

Re: [Observium] Potential bugs - r2726
by Adam Armstrong 16 Nov '11

16 Nov '11

This is currently by design. We could do with something to make it prettier though. Berant Lemmenes <berant(a)lemmenes.com> wrote: >Yeah looks like both my non billing issues were PHP RAM limited, thanks for >the pointer. > >The only other non billing related thing is the global settings link just >pulls up a text listing of the various array's that the settings are stored >in. > >Thanks, >Berant > >On Tue, Nov 15, 2011 at 12:17 PM, Adam Armstrong <adama(a)memetic.org> wrote: > >> >> Ports page is probably down to memory limits on PHP. check logs. >> >> The billing page is being reworked at the moment, and some things might >> not work :) >> >> adam. >> >> >> On Tue, 15 Nov 2011 12:19:15 -0500, Berant Lemmenes <berant(a)lemmenes.com> >> wrote: >> > Some of these could be known issues but I didn't see anything in the >> > bugtracker and wanted to see if they were somehow unique to my >> > installation. >> > >> > There are a couple pages that completely error out, the browser get's a >> > failure trying to load. For me that is the main Inventory page under the >> > overview tab, and the all ports page. I have currently 30 devices with >> ~16k >> > ports in my system. >> > >> > For a page like the all ports page I would expect that to take some time >> to >> > render as it's pulling together a lot of info for 16k interfaces, >> however >> > after maybe 1-2 seconds it fails. >> > >> > Filtering under the traffic bills page doesn't seem to work, when >> > I first started entering Bills I know I was able to filter by over/under >> > quota, however now that I have 67 in it doesn't seem to work. Also I'm >> not >> > sure what the 'All Customers' drop down is supposed to filter on as I've >> > filled out all the customer/bill related fields when adding a new bill >> and >> > it never populates. >> > >> > In general I don't see any place to look for clues as to what is failing >> on >> > the page failures, as the apache error.log doesn't have anything and the >> > observium.log file is only poller items. Can I enable more verbose >> logging >> > into the observium.log file somehow? >> > >> > Thanks, >> > Berant >> _______________________________________________ >> observium mailing list >> observium(a)observium.org >> http://postman.memetic.org/cgi-bin/mailman/listinfo/observium >> > >_______________________________________________ >observium mailing list >observium(a)observium.org >http://postman.memetic.org/cgi-bin/mailman/listinfo/observium

2 3

Cisco ASA Remote Access Sessions getting Error Drawing Graph
by Jeff Collyer 15 Nov '11

15 Nov '11

Using Observium to monitor several pairs of Cisco ASA 5520 firewalls. On the graphs/firewall page /observium/device/device=27/tab=graphs/group=firewall/ the very last graph is labeled Remote Access Sessions. I'm getting the ubiquitous "Error Drawing Graph" on that row of graphs. whats my next debugging step? The apache logs don't show any errors, so I'm guessing its somewhere in the Observium or RRDtool layers. Observium 0.11.11.2726 Apache 2.2.14 (Ubuntu) PHP 5.3.2-1ubuntu4.10 MySQL 5.1.41-3ubuntu12.10 Thanks ---- Jeff

1 0

Potential bugs - r2726
by Berant Lemmenes 15 Nov '11

15 Nov '11

Some of these could be known issues but I didn't see anything in the bugtracker and wanted to see if they were somehow unique to my installation. There are a couple pages that completely error out, the browser get's a failure trying to load. For me that is the main Inventory page under the overview tab, and the all ports page. I have currently 30 devices with ~16k ports in my system. For a page like the all ports page I would expect that to take some time to render as it's pulling together a lot of info for 16k interfaces, however after maybe 1-2 seconds it fails. Filtering under the traffic bills page doesn't seem to work, when I first started entering Bills I know I was able to filter by over/under quota, however now that I have 67 in it doesn't seem to work. Also I'm not sure what the 'All Customers' drop down is supposed to filter on as I've filled out all the customer/bill related fields when adding a new bill and it never populates. In general I don't see any place to look for clues as to what is failing on the page failures, as the apache error.log doesn't have anything and the observium.log file is only poller items. Can I enable more verbose logging into the observium.log file somehow? Thanks, Berant

2 2

Toner MIB?
by Matthew Coene 15 Nov '11

15 Nov '11

Anyone else suddenly have their toner MIB / graphing charts go straight to 0 / nan%?? Can't be sure when it started happening... can only say it used to work... Experienced in svn v2705... Just updated to v2714 to see if its fixed... Cheers, Matt

2 2

NetApp Storage
by Brian Davis 15 Nov '11

15 Nov '11

Does anyone know if it is possible to graph the storage usage on NetApp with Observium? ----------------------------------------------------------------- Brian Davis Concepts NREC bda(a)conceptsnrec.com<mailto:bda@conceptsnrec.com> ________________________________ Please consider the environment before printing this email. ________________________________ The information contained in this communication and any attachment(s) and/or link(s) hereto may contain proprietary and/or confidential information, which may be privileged or otherwise protected from disclosure, and is intended only for the sole use of the intended recipient(s). Any unauthorized review, use, disclosure, or distribution is strictly prohibited. If you have received this communication in error, please return it to the sender immediately and delete the original message from your computer system. If you have any questions concerning this message, please contact the sender.

1 0