- observium - lists.observium.org

Alerts in "Other" state
by Ben Steele 23 Oct '14

23 Oct '14

Hi, I have quite a few alerts stuck in the "Other" state, any idea on what causes this? I had this problem a while ago and then it seemed to disappear after creating a few more alerts and several svn updates so i'm not really sure what cleared it but after adding more devices it's back again. I've tried regenerating the alerts a few times but that makes no difference, is there some debug that can be turned on to work out what is going on here? It's across multiple alert checkers and even something as simple as "device status eq 0" for a device down check has multiple alerts stuck in "other" state. Hovering over the alert shows an empty status: [image: Inline image 2] [image: Inline image 1] Cheers

2 2

Server drive space
by Darian Jimenez 23 Oct '14

23 Oct '14

Hello, I want to monitor windows servers for C drive space. While I had a policy that was using the storage_perc gt 90 and it was working fine, I want to monitor instead just for servers with 5 GB of space or less, on any drive for now, then narrow it to certain drives. I put storage_free lt 5 (thinking this would look for 5GB or less, maybe its 5% or less not sure) but it's throwing some alerts that are not true. I get some servers with the art and when I check it shows as if the C drive had 0 B left, but in reality they have 11 GB and more free. Any idea how I can accomplish what I want? Thanks, Darian

3 6

php5-mcrypt
by Robbie Wright 23 Oct '14

23 Oct '14

Running Ubuntu 14.04 and getting this error message: The extension 'mcrypt' is missing. This extension required for use by the "remember me" feature. Please install the php5-mcrypt package on Ubuntu/Debian or the php-mcrypt package on RHEL/Centos. Alternatively, you can disable this feature by setting $config['login_remember_me'] = FALSE; in your config. We've uninstalled and reinstalled it twice now and still getting this error. Any else bumped into this issue before? Robbie Wright Siuslaw Broadband <http://siuslawbroadband.com> 541-902-5101

3 4

cisco 1841 / memory / draw error
by Massimo Sala 23 Oct '14

23 Oct '14

Observium CE 0.14.4.5229 PHP 5.4.4-14+deb7u14 MySQL 5.5.40-MariaDB-1~wheezy-log SNMP NET-SNMP version: 5.4.3 RRDtool 1.4.7 Cisco IOS Software, 1841 Software (C1841-SPSERVICESK9-M), Version 12.4(6)T11, RELEASE SOFTWARE (fc2) How can I troubleshoot the memory graphs generation ? All the other graphs are fine. Best regards, Sala

2 1

Re: [Observium] alert repeat?
by Zhenhui Liang 23 Oct '14

23 Oct '14

I found an option to do ignore until ok on the interface settings. But it is really unrealistic to do this manually for hundreds of ports. Any easier way to achieve this? I do want to monitor ports status, but I don¹t want to get a flood of alerts every 24 hours. Thanks a lot. On 10/22/14, 6:40 PM, "Zhenhui Liang" <ZhenhuiLiang(a)eharmony.com> wrote: >Hi, > >We have some switches with thousands of ports. I know, we don¹t have >administrative down for unused ports. So I set up port down alerts for >all ports, so that the initial alert of the down ports, I just ignore so >I know those are ports already down. So the theory is that for any >following alerts, I will look into them. > >But I found out observium will send out the massive port down alerts >exactly in 24 hours frequency. How do I disable the persistent alerting? >I want observium only alert me once for an event period. > >Thanks a lot. > > >‹Zhenhui >_______________________________________________ >observium mailing list >observium(a)observium.org >http://postman.memetic.org/cgi-bin/mailman/listinfo/observium

5 8

95th percentile and billing module - possible discrepancies
by colin.barker＠bluesky.co.uk 23 Oct '14

23 Oct '14

Hi I thought I would post here first, just in case what I am seeing isn't a bug, and just me just mis-understanding the calculations. Just a quick setup - we currently are billed on a 95th percentile from an ISP, which we have two physical ethernet connections plugged into two different HP ProCurve switches. I have created a Bill under Traffic Accounting, and set the billing type as 95th @ 50 Mbps, and added both the ports for our connections so I am able to see both under "Bill Ports". This has been running for about 6 - 7 months now, calculating away. While going back through our reports, I noticed that in September we had an overage marked in Observium as 11.4Mbps (Actual usage 61.4Mbps). However the bill we got from the ISP gave us an overage of 30.38Mbps (Actual usage 80.38Mbps). So I went to look deeper and got the break downs I needed. Our ISP gave us the following for the highest 95th: Link1: 50.375Mbps Link2: 30.005Mbps Total: 80.38Mbps I then looked on Observium for the graphs for the two ports, and they reported the following for the highest 95th: Link1: 49.64Mbps Link2: 30.44Mbps Total: 80.08Mbps I can accept that two different systems there may be a very small discrepancy with the larger numbers - which is fine, however -- the problem arrives when the billing calculations comes in, and shows the values as above (11.4Mbps over, 61.4Mbps usage). I have uploaded the two port graphs and a screen grab from the billing page to show in more detail the above numbers here: http://imgur.com/a/iErfo I just want to check I have not missed something that is staring me in the face in regards to the calculations, and if I am, please let me know! Thanks in advance. Regards Colin Barker

3 4

error on svn update
by Damien Burke 23 Oct '14

23 Oct '14

This issue just popped up. I verified that the username/pw for my paid subscription is valid. I can reach the svn.observium.org url from the server (tested with curl). I do still however get this error: root@observium:/opt/observium# svn update svn: PROPFIND of '/svn/observium/trunk': Could not read status line: Connection reset by peer (http://svn.observium.org) wat?

1 0

alert repeat?
by Zhenhui Liang 23 Oct '14

23 Oct '14

Hi, We have some switches with thousands of ports. I know, we don’t have administrative down for unused ports. So I set up port down alerts for all ports, so that the initial alert of the down ports, I just ignore so I know those are ports already down. So the theory is that for any following alerts, I will look into them. But I found out observium will send out the massive port down alerts exactly in 24 hours frequency. How do I disable the persistent alerting? I want observium only alert me once for an event period. Thanks a lot. —Zhenhui

2 2

Re: [Observium] observium Digest, Vol 51, Issue 84
by Rutger Bevaart 22 Oct '14

22 Oct '14

On 22 Oct 2014, at 09:38, observium-request(a)observium.org wrote: ? > > On Wed, Oct 22, 2014 at 10:53 AM, Rutger Bevaart <rutger(a)xconnect24.com> > wrote: > >> Hi all, >> >> I can confirm that the issue is gone in 5903! >> >> Thanks Mike & Joe for the excellent input (and fix)! >> >> Let me know if any additional input, debugging or testing. >> >> Regards, >> Rutger I have been too quick to judge, the issue is still there, although it seems to be less. Ideas?

3 3

Overriding location codes
by Robbie Wright 22 Oct '14

22 Oct '14

We've got custom locations defined in config.php so all of our devices use a 3 or 4 digit location code for snmp, Observium reads the location code, checks config.php and sets the full address. We have some devices that do not have location in snmp so we set it manually by overriding it in the device settings. However, overriding sysLocation and providing a custom location does not compare that location to what is setup in the config.php. So can a custom location setting check config.php for the value? Robbie Wright Siuslaw Broadband <http://siuslawbroadband.com> 541-902-5101

1 0