- observium - lists.observium.org

Procedure to add a MIB file for a device already monitored by Observium
by Charles Nadeau 01 Nov '12

01 Nov '12

Hello, I put a MIB file in /opt/observium/mibs/ for a device whose interfaces I already monitor with SNMP. In order to have Observium uses the MIB to monitor all its components do I just run "/opt/observium/discovery.php -h new" again or do I have to modify "config.php" then run "/opt/observium/discovery.php -h new"? Thanks! Charles -- Charles Nadeau Ph.D. http://charlesnadeau.blogspot.com/

3 2

Re: [Observium] observium Digest, Vol 28, Issue 1
by Charles Nadeau 01 Nov '12

01 Nov '12

On Thu, Nov 1, 2012 at 8:00 PM, <observium-request(a)observium.org> wrote: > Date: Thu, 01 Nov 2012 12:43:25 +0400 > From: Nikolay Shopik <shopik(a)inblock.ru> > To: Observium Network Observation System <observium(a)observium.org> > Subject: Re: [Observium] Procedure to add a MIB file for a device > already monitored by Observium > Message-ID: <5092362D.9000403(a)inblock.ru> > Content-Type: text/plain; charset=UTF-8 > > Nope, > > MIB just describe these counters it won't add support to observium. > Patch is need to add support of new device/mib Can you tell me where and what to add, I could give it a go then share it if I am successful. Thanks! Charles

2 1

IP SLA
by John Macleod 30 Oct '12

30 Oct '12

I have setup two devices with IP SLA, however I am not getting anything in Observium. One is a Cisco 877W 12.4(24)T6, the other is a Cisco 2901 15.1(4)M3. I verified that the IP SLA module is enabled, I must be missing something?

6 16

fresh installation, no login screen
by Elad Eyal (Ubiqam) 29 Oct '12

29 Oct '12

I've followed the installation instructions to the letter, and while I can get to the observium webpage, I can see observium logo and the text "Big Graphs | Widescreen | Not logged in!" on the top right of the page, I can't see anything else. Furthermore, when I look at the HTML source of the page delivered, it ends with " Not logged in!" and not with </HTML> as I would expect. The machine is a brand new Amazon EC3 VM running Ubuntu 12.04.1 LTS. I'd appriciate any help. I don't see anything of interest in the apache logs. The same client (browser) works OK for the live demo. thanks Elad

4 4

Custom port descriptinos
by Michael Cushard 26 Oct '12

26 Oct '12

Hi, I see that the ability to add custom port descriptins is available, but I cannot find any instructions to how to actually do it. What is the procedure for adding custom port descriptions? Regards, Michael Cushard

1 0

Device Traffic Graph
by Bruno Galeppe 25 Oct '12

25 Oct '12

Hi, I set up several devices on Obervium, no problem so far, except for the Traffic Graphs which remain empty. For example : http://img4.hostingpics.net/pics/168961data.jpg The RRD file exist, but the data always return 0.00 How can I debug that ? Is there an snmpwalk command to help understand the problem ? Regards,

4 21

Various questions (BGP/Discovery/Pseudowires/Hostname truncating)
by Jason Lixfeld 22 Oct '12

22 Oct '12

First off, let me say thanks to the developers of Observium. This piece of code is one of the most amazing pieces of code I have used for my network monitoring purposes to date. I have a few questions that I'm hoping someone can answer - BGP: ---- I have a few eBGP speakers that live inside a VRF. Observium picks up the VRFs just fine, but the routing tab for the device only seems to show the BGP sessions that exist in the global (non-VRF) table. Is it possible to show the BGP sessions that exist inside a VRF? Pseudowires: ------------ I see lots of data inside the pseudowires table on the observium database, but I don't see any of that inside the pseudowires tab from within a device where I know pseudowires are configured. These pseudowires exist on IOS boxes, IOS-XR boxes and IOS-XE boxes. I do see a few. Observium > Ports > Pseudowires shows me 11 pseuowires. 6 of them are duplicates of one another while 5 are unique. The database shows hundreds. While looking through a ./discovery.php -d I ran against one of our XR boxes, I did see this: Cisco Pseudowires : SQL[SELECT * FROM `pseudowires` WHERE `device_id` = '1'] DEBUG: SNMP Auth options = -v2c -c ************ /usr/bin/snmpbulkwalk -v2c -c ************ -OQUs -m CISCO-IETF-PW-MPLS-MIB -M /opt/observium/mibs udp:router:161 cpwVcID cpwVcID = No Such Instance currently exists at this OID DEBUG: SNMP Auth options = -v2c -c ************ /usr/bin/snmpbulkwalk -v2c -c ************ -OQUs -m CISCO-IETF-PW-MPLS-MIB -M /opt/observium/mibs udp:router:161 cpwVcName cpwVcName = No Such Instance currently exists at this OID DEBUG: SNMP Auth options = -v2c -c ************ /usr/bin/snmpbulkwalk -v2c -c ************ -OQUs -m CISCO-IETF-PW-MPLS-MIB -M /opt/observium/mibs udp:router:161 cpwVcType cpwVcType = No Such Instance currently exists at this OID DEBUG: SNMP Auth options = -v2c -c ************ /usr/bin/snmpbulkwalk -v2c -c ************ -OQUs -m CISCO-IETF-PW-MPLS-MIB -M /opt/observium/mibs udp:router:161 cpwVcPsnType cpwVcPsnType = No Such Instance currently exists at this OID DEBUG: SNMP Auth options = -v2c -c ************ /usr/bin/snmpbulkwalk -v2c -c ************ -OQUs -m CISCO-IETF-PW-MPLS-MIB -M /opt/observium/mibs udp:router:161 cpwVcDescr cpwVcDescr = No Such Instance currently exists at this OID DEBUG: SNMP Auth options = -v2c -c ************ /usr/bin/snmpbulkwalk -v2c -c ************ -OQUs -m CISCO-IETF-PW-MPLS-MIB -M /opt/observium/mibs udp:router:161 cpwVcMplsPeerLdpID cpwVcMplsPeerLdpID = No Such Instance currently exists at this OID That seems to show that pseudowire support for XR isn't there yet? Is that on the road map, by chance? Discovery: ---------- There are a couple of devices that aren't getting discovered for some reason. The IP that their hostname resolves to is within the 'nets' arrays configured inside config.php and I have other SNMP devices that reach those boxes, so I know the SNMP side is sound. Likewise, I can see the device in question in the CDP table of an adjacent device, so I know that part is working as well. I've looked at a ./discovery -d of an adjacent device hoping to see a clue about why the device is being skipped, but nothing is striking out at me. Hostname truncating: -------------------- We name our devices <device><device_number>.<pop>.<city>.domain.tld. In the devices view, it shows the full device name no problem. In the VRF view, for example, however, it shows only <device><device_number>, truncating the pop and city portions. If anyone has any insight or guidance on these issues, I'd be grateful! Thanks in advance.

2 3

Unable to get non-MySQL Auth working - 500 error
by Chris Moody 19 Oct '12

19 Oct '12

Hello. First off, let me say that this project is AWESOME!!! I am blown away at how comprehensive the graphing is across our network gear. Bravo. That said, I need a hand in figuring out why I cannot seem to get any auth-method other than mysql to work. If I so much as toggle to any other auth-method (ldap or http-auth), I immediately get a 500 'Internal Error' when I try to hit the Observium login page. I'm ultimately trying to get auth to the application to be handled via LDAP, but I can do it via either the observium-ldap component or via http-auth combined with mod_authz_ldap... makes me no difference. I've had some success w. mod_authz_ldap in that I can get authentication to actually pass for a user account (I am able to bypass the login promptsuccessfully), but as soon as I auth, I hit the dreaded 500. I'm not able to find anything in any http logs regarding what might be possibly throwing the 500. lsof lists any open filehandles for httpd, so I've checked every possible file that logs could be directed to, but no cluesthus far. This particular box is a RHEL5 running Observium 0.12.10.3396 Any ideas are welcome. Cheers, -Chris

2 1

unix agent polling broken in 3397 - likely a couple of versions before too
by Chris Stone 18 Oct '12

18 Oct '12

No data for servers using the unix agent for a couple of weeks now. Have Observium build 3397 installed. Just had a chance to do some troubleshooting... Running poller update on a specific server in debug mode reveals the apparent problem: ======================================================================================= including: includes/polling/unix_agent.inc.php PHP Warning: include(includes/polling/unix_agent.inc.php): failed to open stream: No such file or directory in /opt/observium/includes/polling/functions.inc.php on line 192 Warning: include(includes/polling/unix_agent.inc.php): failed to open stream: No such file or directory in /opt/observium/includes/polling/functions.inc.php on line 192 PHP Warning: include(): Failed opening 'includes/polling/unix_agent.inc.php' for inclusion (include_path='.:/usr/share/pear:/usr/share/php') in /opt/observium/includes/polling/functions.inc.php on line 192 Warning: include(): Failed opening 'includes/polling/unix_agent.inc.php' for inclusion (include_path='.:/usr/share/pear:/usr/share/php') in /opt/observium/includes/polling/functions.inc.php on line 192 ======================================================================================= Fixed (worked around) by running: ln -s /opt/observium/includes/polling/unix-agent.inc.php /opt/observium/includes/polling/unix_agent.inc.php Added to Jira as well: http://jira.observium.org/browse/OBSERVIUM-154 Chris -- Chris Stone AxisInternet, Inc. www.axint.net

2 4

Backing Up Observium
by Mahomed Hussein 18 Oct '12

18 Oct '12

Hi I need to ensure our install of Observium is fully backed up and I'd rather not backup the entire VM. Could you please confirm if all I need to backup are: * /opt/observium directory * Observium database * /etc/apache2/sites-enabled/000-default What I'd like to achieve from the backups is to spin up a new VM instance, run through the install steps to get the required components installed, then restore the files so that Observium then just runs as it was at the point of the last backup. I have tried checking the FAQ and a search of the mailing list but I couldn't find any specific instructions. Any help will be greatly appreciated. Thanks in advance. Kind regards, Mahomed Hussein Custodian DataCentre email: Mahomed(a)CustodianDC.com

10 23