- observium - lists.observium.org

Sensors not picking up, get rediscovered 4 times a day
by Morgan McLean 26 Jun '12

26 Jun '12

My logs look like this...any idea why its not picking up? I have about 50 juniper devices, an APC device and a couple others and it doesn't seem to monitor or graph any of the sensors. I have seen some information about sensor configuration under config.php, but it wasn't very helpful. Every time the discovery runs, or maybe its the poller, not sure, it finds all these sensors for every device, but it does nothing with them. Is there a switch I need to flip? Thanks! Morgan 21/Jun/12 12:39:04Sensor Added: temperature junos 6.1.0.0 TFEB MX8021/Jun/12 12:39:04Sensor Added: temperature junos 6.1.1.0 TFEB Intake21/Jun/12 12:39:04Sensor Added: temperature junos 9.1.0.0 Routing Engine21/Jun/12 12:39:03Processor added: type junos index 6.1.0.0 descr TFEB MX8021/Jun/12 12:39:03Processor added: type junos index 7.1.0.0 descr FPC @ 0/*/*21/Jun/12 12:39:03Processor added: type junos index 7.2.0.0 descr FPC @ 1/*/*21/Jun/12 12:39:03Processor added: type junos index 9.1.0.0 descr Routing Engine

2 4

up / down gives no warning
by Ian Armstrong 24 Jun '12

24 Jun '12

Hi, Observium has been working very well over the past few months and now I want to begin tailoring it for our network specifically. We use an Ubuntu install as per the instructions and had no install problems. On the overview page we get an orange warning for a non-ignored link that goes into the (Cisco) down/down state BUT NOT when they are up/down. Is this a setting, bug or feature? If it can be changed does anyone know how - I would like a warning for any link that goes down/down and up/down. I have looked through the documentation, options and settings but find nothing. I also tried [alert][port][ifdown] as a long shot. Any help would be great. Thanks Ian

2 2

custom scripts
by mhoffmann＠arcor.de 22 Jun '12

22 Jun '12

Hello, i have many Allied Telesis Switches. Most Values are covered by the RADLAN-Mib, but some Values like Temp or PowerConsumption are not available inside SNMP. Is there a Wrapper or a other possibility to get this values? I think about a script which read the values and offer it to observium.

2 1

Apache authentication
by Ciro Iriarte 21 Jun '12

21 Jun '12

Hi, can someone confirm me if observium supports external (apache2) authentication?, I'm looking for kerberos authentication against AD. Regards, -- Ciro Iriarte http://cyruspy.wordpress.com --

4 9

How to monitor ASA connection table ?
by inlee 13 Jun '12

13 Jun '12

Hi I just installed observium. ASA is polling all the information from ASA 55xx except connection count. How can i add polling ASA connection count?

2 1

Speaking of Observium's pretty graphsŠ
by Andrew Beals 13 Jun '12

13 Jun '12

One of our clients uses a very large HP ProCurve 4108gl switch as the central hub of their network. When I'm looking at traffic graphs from it for large spaces of time, I invariably see it pegged to +/- 20Gbps because of some traffic spikes during the day (e.g. Windows clients talking to WSUS and downloading their patches). If I zoom in on one of the "empty" stretches of time, I see that there is actually some traffic flowing – it's just so small in comparison that it gets flatlined by the spikes. What I'd like to be able to do is to change the graph from a linear one in the Y (bps) axis to a logarithmic one, so I can see my traffic. For example, here's the past 24 hours: [cid:5CBC68CF-394E-403F-9F59-AB51C6450F66] (The rrdtool command that produces this graph is truly impressive and only crawls out of its blue box with the last set of CDEF statements before the giant list of AREA statements.) (All graphs generated for this e-mail use the same time span on the same hardware) I know, I know, "Use the Source, Luke!", but I've only watched the commits fly past, not actually dug into the code past the config file (and this doesn't appear to be a configuration option). rrdtool_graph() is called in three places, and fortunately only defined in one. Applying the obvious small patch: Index: html/includes/graphs/graph.inc.php =================================================================== --- html/includes/graphs/graph.inc.php (revision 3268) +++ html/includes/graphs/graph.inc.php (working copy) @@ -146,6 +146,7 @@ if ($rrd_options) { + $rrd_options .= " --logarithmic"; rrdtool_graph($graphfile, $rrd_options); if ($debug) { echo($rrd_cmd); } if (is_file($graphfile)) Nets me this: [cid:806F0C8F-84AE-4C4F-8D2D-04802B3A5EB7] Which could probably use a little more tweaking. I'd rather see SI "-bi-" units on the left rather than scientific notation. Also, it does tend to whack the CPU pretty hard figuring it all out, pegging both of the CPUs in the old ml350 I'm using for monitoring. Running "rrdgraph" at "nice +4" (or better) would likely be a win w/r/t data collection. This patch: Index: html/includes/graphs/graph.inc.php =================================================================== --- html/includes/graphs/graph.inc.php (revision 3268) +++ html/includes/graphs/graph.inc.php (working copy) @@ -146,6 +146,7 @@ if ($rrd_options) { + $rrd_options .= " --logarithmic --units=si"; rrdtool_graph($graphfile, $rrd_options); if ($debug) { echo($rrd_cmd); } if (is_file($graphfile)) Nets this: [cid:4C488D23-BF57-49B9-BBBE-C2D43F0E17AF] I'm pretty happy with this, overall. For those who are curious, the ProCurve Switch 4108gl has a claimed capacity of: routing/switching capacity 36.6 Gbps Throughput up to 71.4 mpps Being able to tweak individual graphs to show logarithmically would probably be nice, just to save some CPU for graphs that don't really need it. -- Andrew Beals Cell: 913-787-7538 Desk: 913-948-8782 E-mail: ABeals(a)mersoft.com<mailto:ABeals@mersoft.com>

2 1

Vyatta
by Adam Blackington 11 Jun '12

11 Jun '12

Any ideas on getting Vyatta recognized? We keep seeing it as a generic device, and can't seem to get it working. :-/ Running v2c communities. *Adam Blackington* | Solutions Engineer *LionLink* *Networks *| www.lionlink.net | AS54098 O: (571) 451.2300 | D: (571) 482.1490 | E: ablackington(a)lionlink.net

2 17

Having troubles with BGP
by Sonny Kupka 11 Jun '12

11 Jun '12

Hello, I'm testing out Observium for use. I have run in to an issue where BGP for 3 Peers show up as down (They are shutdown in switch configuration) and 2 other peers on another switch is showing the same thing.. Peer is shutdown on the switch.. I can't find anywhere to check ignore to have the Observium ignore the peers which are down .. I tried searching all over for this information but thus far I haven't been successful. Thanks for you time! Sonny

3 4

Pretty Graphs
by Adam Armstrong 08 Jun '12

08 Jun '12

Hi All, It occurs to me that one of the reasons we've managed to keep the project alive for 6 years is that everyone loves graphs. It's one thing to store a bunch of numbers and draw a line, but it's a totally different thing to craft a pretty graph from those numbers. If any of you have graphs or pages that look particularly good, feel free to email us a screenshot, it'd be nice to break up the deafening torrent of inane cat pictures, right? We might even use them on the screenshots page :) adam.

1 0

Editing user passwords
by Chris Stone 06 Jun '12

06 Jun '12

Just had a user that could not, for whatever reason, log into our Observium installation. So, I was going to reset the password, but editing the user, found nothing there to do that. Seems that there is no way for anyone other than each user to edit passwords after the account is initially created? And if that user cannot log in, they cannot do it. I ended up deleting the login, recreating it, and then re-linking the devices, ports and bills the user has access to. Did I miss something? Chris -- Chris Stone AxisInternet, Inc. www.axint.net

5 8